+Thu Oct 07 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * breakpoint.c, breakpoint.h (breakpoint_init_inferior): New function
+ that clears the `inserted' flag for all breakpoints and deletes
+ any breakpoints which should go away between runs of programs.
+ * inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
+ remote-es.c (es1800_load), comments in exec.c and corelow.c:
+ Use it instead of mark_breakpoints_out.
+ * breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h
+ uses it in a completely different context.
+ * breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.
+
+Thu Oct 07 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * Makefile.in (REGEX, REGEX1): Always use our own version of
+ regex.c to be consistent across hosts.
+ * source.c (_initialize_source): Initialize regex to use grep
+ style syntax as an approximation to POSIX basic regex syntax.
+
+Wed Oct 6 12:43:47 1993 Jeffrey A Law (law@snake.cs.utah.edu)
+ Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * hppa-tdep.c (frame_chain): Rework so that it correctly
+ handles boundaries where code with a frame pointer calls code
+ without a frame pointer.
+ (dig_fp_from_stack): New function.
+
+Wed Oct 6 12:43:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (delete_breakpoint): Don't insert a disabled breakpoint.
+
+ * README: Add Alpha notes from Schauer.
+
+Tue Oct 5 15:26:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't
+ understand what it is trying to do, but I suspect it's not doing
+ it.
+
+ * config/ns32k/merlin.mh: Add comment about M_INSTALL.
+ * config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
+ M_UNINSTALL; it tries to install a non-existent file gdb.z.
+ * Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
+
+ * stabsread.c (read_range_type): Remove comment which recommends
+ distinguishing float from complex by the name.
+
+Tue Oct 5 12:17:40 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+ Jim Kingdon (kingdon@cygnus.com)
+ Stu Grossman (grossman@cygnus.com)
+
+ Changes to support alpha OSF/1 in native mode.
+ * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
+ config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
+ New files.
+ * Makefile.in: Add new files and dependencies.
+ * configure.in: Add alpha target.
+ * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
+ * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
+ shared libraries now.
+ * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
+
+ * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
+ provide `unsigned int' default.
+ * breakpoint.c (breakpoint_auto_delete): Delete only if we really
+ stopped for the breakpoint.
+ * stabsread.c, stabsread.h (define_symbol): Change valu parameter
+ to a CORE_ADDR.
+ * stabsread.c (read_range_type): Handle the case where the lower
+ bound overflows and the upper doesn't and the range is legal.
+ * infrun.c (resume): Do not step a breakpoint instruction if
+ CANNOT_STEP_BREAKPOINT is defined.
+
+ * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
+ Now that we have the bp_call_dummy breakpoint the call dummy code
+ is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
+ FIX_CALL_DUMMY can be used to set up everything for the dummy.
+ The breakpoint for the dummy is set at the entry point and thats it.
+ * blockframe.c (inside_entry_file, inside_entry_func): Do not stop
+ backtraces if pc is in the call dummy at the entry point.
+ * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
+ the expected breakpoint pc when setting up the frame for
+ set_momentary_breakpoint.
+ * symfile.c (entry_point_address): New function for AT_ENTRY_POINT
+ support.
+ * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
+
+Tue Oct 5 11:37:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
+ Change other hppa host entries to use -*- not -hp-.
+
+Mon Oct 4 19:16:14 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * i386-nlmstub.c: New file; debugging stub for i386 NetWare. Must
+ be compiled with NetWare header files and turned into an NLM with
+ nlmconv.
+
+Mon Oct 4 11:02:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * minsyms.c (lookup_minimal_symbol_by_pc): Don't use mst_abs symbols.
+
+ * dbxread.c (process_one_symbol): Make n_opt_found static.
+
+ * Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names.
+ * Makefile.in, config/i386/i386lynx.mt: Change accordingly.
+
+ * values.c (record_latest_value): Fetch lazy values and set VALUE_LVAL
+ to not_lval.
+
+Sun Oct 3 15:54:51 1993 Stan Shebs (shebs@rtl.cygnus.com)
+
+ * objfiles.h (objfile): New slot sym_stab_info, use by most
+ stab-reading formats.
+ * gdb-stabs.h (DBX_SYMFILE_INFO): Access sym_stab_info instead of
+ sym_private.
+ * coffread.c (coff_symfile_init): Alloc struct for sym_stab_info.
+ * dbxread.c, elfread.c, paread.c: Change sym_private references to
+ sym_stab_info references.
+
+Sat Oct 2 19:28:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * mipsread.c, objfiles.c, utils.c: Use PTR not void *. RISC/OS
+ 4.02 lacks void *.
+ * elfread.c: Use void * not PTR inside PARAMS.
+
+ * config/mips/news-mips.mh: Remove coredep.o; mips-nat.o does it.
+ * config/mips/news-mips.mh: Define NAT_FILE not NM_FILE.
+ * config/mips/nm-news-mips.h: Include mips/nm-mips.h not nm-mips.h.
+
+Sat Oct 2 16:05:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt,
+ tm-i386lynx.h: Add support for SVR3 COFF shared libraries.
+
+Sat Oct 2 15:50:41 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m88k-nat.c (store_inferior_registers): When writing all registers,
+ don't try to write EXIP_REGNUM or ENIP_REGNUM (not needed for this
+ case, and they cause trouble).
+
+ * TODO: Don't suggest doing fast watchpoints by stepping a line
+ at a time. That would be really hairy and still not fast enough.
+ Do suggest debug registers and page table diddling.
+
+Fri Oct 1 14:54:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * printcmd.c (do_examine): Make meaning of 'h', 'w', and 'g' not
+ depend on builtin_type_*. Instead, it is always 2, 4, and 8 bytes
+ like the documentation says.
+ * printcmd.c (decode_format) [CC_HAS_LONG_LONG]: Remove 'l' as
+ synonym for 'g'. This was never documented, it shouldn't depend on
+ CC_HAS_LONG_LONG, and I don't see what's wrong with 'g'.
+
+Fri Oct 1 10:06:35 1993 Kung Hsu (kung@cirdan.cygnus.com)
+
+ * symtab.c: fix a bug in testsuite (virtfunc.exp)
+
+Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m88k-nat.c (fill_gregset): Fix typo (R_SFIP -> R_FIP).
+
+ * c-typeprint.c (c_type_print_base, TYPE_FN_FIELD_STUB code):
+ If demangled name lacks a colon, don't dump core.
+
+ * blockframe.c (find_pc_partial_function): If pst->readin is
+ set, don't try to get symbols from pst.
+
+ * inflow.c (generic_mourn_inferior): Call reinit_frame_cache
+ instead of doing it ourself.
+ * blockframe.c (reinit_frame_cache): Use code which was in
+ generic_mourn_inferior so we can use this function even when
+ we have switched targets.
+ * corelow.c (core_detach): Call reinit_frame_cache.
+ * target.c (target_detach): Don't call generic_mourn_inferior
+ (revert yesterday's change, now handled by core_detach).
+ * objfiles.c (free_objfile): Detach any core file if we call
+ SOLIB_CLEAR. #include target.h.
+
+ * fork-child.c (fork_inferior): Don't call target_terminal_init
+ and target_terminal_inferior until we are sure that the inferior
+ has called gdb_setpgid. This fixes PR 2900 (Schauer tracked it
+ down and was able to reliably reproduce it by putting a sleep()
+ before the gdb_setpgid()).
+
+Thu Sep 30 12:00:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * c-exp.y, m2-exp.y: Change type of address for msymbol to
+ builtin_type_long.
+ * infptrace.c (fetch_register, store_inferior_register,
+ child_xfer_memory): Use PTRACE_XFER_TYPE for the type of ptrace
+ transfers. Provide an `int' default for PTRACE_XFER_TYPE.
+
+Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * defs.h (TARGET_*_BIT): Don't use host information (sizeof) in
+ picking defaults.
+
+ * cp-valprint.c (cp_is_vtbl_ptr_type): Continue to accept old form.
+
+Thu Sep 30 11:25:55 1993 Kung Hsu (kung@cygnus.com)
+
+ * cp-valprint.c (cp_is_vtbl_ptr_type):
+ change vtable field name to __vtbl (pr2695).
+
+ * symtab.c (gdb_mangle_name): fix a bug, to get mangled name right.
+
+Wed Sep 29 18:34:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in: Add deps for i386lynx-nat.o and i386lynx-tdep.o to
+ keep non-gnu makes happy.
+
Wed Sep 29 10:52:19 1993 Kung Hsu (kung@cygnus.com)
* c-valprint.c: to fix virtual table print bug (pr2695).
+>>>>>>> 1.1795
Wed Sep 29 10:52:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* target.c (target_detach): Call generic_mourn_inferior.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
- * findvar.c, value.h (write_register): Change register value to long.
+ * findvar.c, value.h (write_register): Change val to LONGEST.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
* remote-udi.c (udi_mourn): Don't pop target.
+>>>>>>> 1.1783
Fri Sep 24 17:25:41 1993 Stu Grossman (grossman at cygnus.com)
* corelow.c: Add multi thread/process support for core files with
projects / deliverable / binutils-gdb.git / blobdiff