+Thu Jul 15 08:34:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * NEWS: Mention that remote.c now has a `load' operation.
+
+ * hppa-tdep.c (pc_in_linker_stub): New function.
+ (find_proc_framesize): Return 0 for linker stubs.
+ (rp_saved): Tell the caller where rp is saved.
+ (frame_chain_valid): Return 1 for linker stubs.
+ (frame_saved_pc): Use return value from rp_saved.
+
+ * stack.c (print_frame_info): When checking PC_IN_CALL_DUMMY,
+ pass the sp relative to the frame in question, not the sp in the
+ innermost frame.
+
+Wed Jul 14 17:37:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * mipsread.c (parse_procedure): Take as argument the symtab to look
+ the name up in. Look it up with mylookup_symbol, not lookup_symbol.
+ (psymtab_to_symtab_1): For stabs, pass the symtab to parse_procedure.
+
+ * mipsread.c (mylookup_symbol): Use strcmp, not STREQ, as we have
+ already checked the first characters.
+
+ Changes from Jeffrey Law:
+ * printcmd.c (makeva_list): Use MAKEVA_EXTRA_INFO to define
+ machine dependent fields in the makeva_list structure.
+ (makeva_size): Allocate extra space to handle gaps made by
+ alignment restrictions.
+ * config/pa/xm-pa.h (MAKEVA_EXTRA_INFO): Define.
+ (MAKEVA_START): Initialize arglist_address field.
+ (MAKEVA_ARG): Always store arguments on natural alignment
+ boundaries. Set arglist_address to the address right after
+ the args.
+ (MAKEVA_END): Simply return the value stored in arglist_address.
+
+Wed Jul 14 13:51:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * ch-valprint.c (chill_val_print, case TYPE_CODE_STRING): Print
+ address, not addr.
+
+ * hppah-nat.c (store_inferior_registers): Don't print i in cases
+ where we aren't using it.
+
+ * a29k-tdep.c (get_saved_register): Fix typo.
+
+Wed Jul 14 09:45:52 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * configure.in: Recognize h8300h (variant of h8300).
+
+start-sanitize-v9
+Wed Jul 14 09:45:52 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * configure.in: Recognize sparc64-*-*.
+end-sanitize-v9
+
+Tue Jul 13 14:03:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * stabsread.c (define_symbol): Make the caddr_t hack apply to `function
+ returning foo' as well as `pointer to foo'.
+
+ * remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
+ * config/m68k/tm-m68k.h: Define it.
+ * mem-break.c, breakpoint.c: Improve comments.
+
+Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
+
+ * config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
+ * config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
+
+Tue Jul 13 11:50:38 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * gdbcore.h (read_memory_integer, read_memory_unsigned_integer):
+ Make prototype match definition.
+
+Tue Jul 13 11:15:15 1993 Fred Fish (fnf@cygnus.com)
+
+ * elfread.c: Remove notice about file still being under
+ construction.
+ * Makefile.in (ultra3-xdep.o, umax-xdep.o): Add missing ')'.
+
+Mon Jul 12 17:46:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * a29k-tdep.c (read_register_stack): Make val static.
+
+Mon Jul 12 14:10:48 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * config/h8300/tm-h8300.h (REGISTER_CONVERTIBLE): Change value to 0.
+ (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Move def'n to
+ usual spot.
+
+Mon Jul 12 11:29:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * c-valprint.c (c_val_print): Fix thinko with unspecified length
+ arrays.
+
+ * hppa-tdep.c (find_proc_framesize): If there is a frame pointer,
+ use it.
+
+Sun Jul 11 19:35:05 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * symtab.c (decode_line_1): Use end of block to figure out whether
+ val.end is in the same function, not minimal symbols.
+
+ * source.c (line_info): Add a few more wrap_here's.
+
+ * i386-tdep.c (i386_follow_jump): Do byteswapping where needed and
+ don't make assumptions about sizes of host data types.
+
+ * blockframe.c, symtab.h (find_pc_partial_function): New arg endaddr.
+ * infrun.c, breakpoint.c, printcmd.c: Change callers.
+ * printcmd.c (containing_function_bounds): Remove.
+ * printcmd.c (disassemble_command): Use find_pc_partial_function,
+ not containing_function_bounds.
+ * infcmd.c (step_1): Use find_pc_partial_function rather than
+ trying to roll our own. Move check for a pc between SIGTRAMP_START and
+ SIGTRAMP_END in find_pc_partial_function, not step_1.
+
+ * sparc-tdep.c (sparc_frame_chain, frame_saved_pc):
+ Keep unswapped value in array of char, not REGISTER_TYPE.
+ Use REGISTER_RAW_SIZE not sizeof (REGISTER_TYPE).
+ (sparc_extract_struct_value_address): Use TARGET_PTR_BIT not
+ sizeof (CORE_ADDR).
+
Thu Jul 1 15:50:05 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
* configure.in (m68*-bull-sysv*): added support for Bull dpx2.
* hppa-tdep.c: Change _initialize_hppab_tdep to _initialize_hppa_tdep.
+start-sanitize-v9
+Thu Jul 8 14:47:00 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * sparc-tdep.c (sparc_frame_chain): Handle sizeof (CORE_ADDR)
+ != sizeof (REGISTER_TYPE).
+ (frame_saved_pc): Ditto.
+end-sanitize-v9
+
Thu Jul 8 08:22:05 1993 Doug Evans (dje@canuck.cygnus.com)
* config/h8300/tm-h8300.h: (REGISTER_TYPES): Adjust for h8/300h.
* config/m68k/tm-m68k.h: Remove obsolete comment about duplicating
CALL_DUMMY between different 68k machines.
+Fri Jun 25 17:02:45 1993 Stu Grossman (grossman at cygnus.com)
+
+ * gdbserver/Makefile.in: Add dependancies on server.h.
+ * gdbserver/remote-gutils.c: Remove lots of unused functions and
+ variables.
+ * gdbserver/remote-inflow.c: Remove lots of unused variables and
+ #includes. Also, use PTRACE_* symbols instead of constants.
+ (mywait): Surround calls to wait() with enable/disable_async_io()
+ so that we can be interrupted from GDB while waiting for the
+ child. Also, handle child exit more gracefully.
+ * gdbserver/remote-server.c: Remove lots of unused variables.
+ Move all extern defs into server.h. Redo main loop so that
+ failure from getpkt() causes communications to be re-established.
+ Fix 'k' command so that it restarts the child.
+ * gdbserver/remote-utils.c: Remove lots of unloved vars and
+ subrs. Move many extern decls into server.h. (remote_open): For
+ tcp, seperate usage of proto fd from connected fd. Close proto
+ fd after getting connection. (putpkt/getpkt): Pay attention to
+ errors when reading/writing. Report these to the caller. New
+ routines input_interrupt/enable_async_io/disable_async_io to make
+ it possible to get an I/O interrupt when data arrives from the
+ comm link.
+ * serial.h: New file to contain common defs for all remote files.
+
Fri Jun 25 17:02:45 1993 Stu Grossman (grossman at cygnus.com)
* remote.c: Add arg names to prototypes, in a modest effort at
* ser-unix.c (wait_for): Restart select() if we got EINTR.
* serial.c: (serial_close): Clean up code.
+Fri Jun 25 11:22:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * config/m68k/tm-m68k.h: Remove obsolete comment about duplicating
+ CALL_DUMMY between different 68k machines.
+
Fri Jun 25 11:22:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* Makefile.in (*.tab.c): Use ./c-exp.tab.c not just c-exp.tab.c.