-Mon Dec 23 02:25:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
- * mips-tdep.c (mips_find_saved_regs): If a frame has been
- interrupted by a signal, figure out whether the registers that
- the proc_desc claims are saved have been saved yet.
- (mips_push_dummy_frame): Write dummy frame register after all
- registers have been saved in the dummy frame. Update comments
- to reflect the fact that we are now using an AT_ENTRY_POINT
- call dummy.
+Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
-start-sanitize-d10v
-Sun Dec 22 15:52:25 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+ * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
- * d10v-tdep.c (d10v_skip_prologue): PR11287. Fix problem where
- some breakpoints weren't being set.
+Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
-end-sanitize-d10v
-Sat Dec 21 12:57:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+ * debugify.c, debugify.h: Make safe for non-ansi compilers.
- * config/mips/tm-mips.h (PC_IN_CALL_DUMMY): Removed, the default
- definition in inferior.h is sufficient.
- * mips-tdep.c (mips_pc_in_call_dummy): Ditto.
- (mips_push_arguments): Make sure that the stack is aligned to a
- multiple of 8 after the arguments are pushed.
- Structures are always passed by value in the old ABI.
- Adjust argument register value on big endian targets when passing
- a value whose length is less than the register size.
- Write stack arguments with a single write_memory call.
- (mips_pop_frame): Use frame_saved_regs instead of proc_desc to
- decide which registers have to be restored.
+Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
- * irix5-nat.c (fill_gregset): Sign extend registers before
- filling in the gregset structure.
+ * defs.h: Fix prototypes for new cleanup functions.
-Fri Dec 20 11:06:03 1996 Stu Grossman (grossman@critters.cygnus.com)
+Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
- * mswin/genmakes: Don't define _DEBUG. This breaks wingdb.
+ * debugify.c, debugify.h: Fix for general gnu use. Remove C++
+ comment, add PARAMS, add license info and fix indentation.
-start-sanitize-v850
-Thu Dec 19 19:42:44 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * v850-tdep.c (v850_scan_prologue): Deal with -mep shorting
- register saves by using the ep register.
-
-end-sanitize-v850
-start-sanitize-m32r
-Thu Dec 19 15:57:16 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * m32r-tdep.c (m32r_frame_find_saved_regs): Fix thinko in arg def.
-
-end-sanitize-m32r
-Thu Dec 19 09:38:56 1996 Mark Alexander <marka@cygnus.com>
-
- * values.c (unpack_double): Make it compile with MSVC++ 2.x.
- * remote-mips.c (S_IROTH): Define if not defined by stat.h, e.g.
- when using MSVC++.
- (common_open): Fix help string.
-
-Wed Dec 18 23:01:32 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Use NewFolderRecursive for installation.
-
-Sat Dec 14 20:50:01 1996 Mark Alexander <marka@cygnus.com>
-
- * mips-tdep.c (mips_push_arguments): Handle floating point args.
- * config/mips/tm-mips.h (FIX_CALL_DUMMY): Define to set up $25
- correctly for PIC on Irix 5.
-
-Sat Dec 14 09:52:30 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * i386-tdep.c (i386_frame_find_saved_regs): Handle zero return
- from get_pc_function_start gracefully.
-
-Sat Dec 14 00:43:57 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * c-exp.y (qualified_name): Replace explicit check for valid
- destructor name with call to destructor_name_p.
-
- * c-lang.h, c-typeprint.c (cp_type_print_method_args): Removed,
- no longer needed.
-
- * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_base):
- Replace remaining fprintf_unfiltered calls with their filtered variant.
- (c_type_print_base): Do not print return type for destructors from
- template classes.
- Replace cp_type_print_method_args with cplus_demangle call to get
- consistent type output for stubbed and unstubbed methods.
-
- * cp-valprint.c (cp_print_class_method): Replace
- cp_type_print_method_args with cplus_demangle call to get consistent
- type output for stubbed and unstubbed methods.
-
- * gdbtypes.c, gdbtypes.h (get_destructor_fn_field): New function
- to find the destructor field indices for a type.
-
- * gdbtypes.h (struct type): Clarify comments for vptr_basetype
- and arg_types fields.
- (struct fn_field): Remove args field, no longer used.
-
- * symtab.c (decode_line_1), valops.c (value_struct_elt,
- check_field_in): Use get_destructor_fn_field to find the destructor
- field indices instead of assuming that the compiler passes the member
- function fields in a specific order.
-
- * symtab.c (find_methods): Pass NULL instead of SYMBOL_BLOCK_VALUE
- to lookup_symbol.
- (list_symbol): Replace cp_type_print_method_args with cplus_demangle
- call in zapped out code and explain why this code is zapped out.
-
-Thu Dec 12 13:29:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/ppc{,le}-sim.mt (SIM): Add the simulator common
- library ../sim/common/libcommon.a.
-
-Wed Dec 11 18:51:35 1996 Mark Alexander <marka@cygnus.com>
-
- * gdbtk.c (gdb_loc): Correct truncation of PC on 64-bit MIPS.
-
-Wed Dec 11 11:15:08 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * monitor.c (monitor_load): Add support for load address argument.
- * dsrec.c: #include <time.h>.
- (load_srec): New argument load_offset. Print download stats.
- * srec.h (load_srec): Update prototype.
- * sh3-rom.c (sh3_load): Update call to load_srec.
-
-Mon Dec 9 17:34:05 1996 Geoffrey Noer <noer@cygnus.com>
-
- * config/mn10300/tm-mn10300.h: more small register fixes
- * mn10300-tdep.c: filled in from another target
-
-Mon Dec 9 17:12:19 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * monitor.c (monitor_insert_breakpoint): Handle bi-endian machines.
-
-Mon Dec 9 15:58:51 1996 Mark Alexander <marka@cygnus.com>
-
- * config/mips/tm-mips.h: Get rid of call-dummy code.
- Minor changes to make pre-ANSI compilers happy.
- * mips-tdep.c: Minor changes to make pre-ANSI compilers happy.
- (mips_push_arguments): Rewrite to partially support EABI.
- (mips_pc_in_call_dummy): New function.
- * infcmd.c: Include symfile.h to get prototype of entry_point_address,
- which fixes 64-bit sign extension bug on MIPS.
-
-Mon Dec 9 00:14:49 1996 Geoffrey Noer <noer@cygnus.com>
-
- * config/mn10300/tm-mn10300.h: fix register names
- * mn10300-tdep.c: new skeleton tdep for mn10300
-
-Sun Dec 8 18:02:57 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * remote-sim.h: Update some comments.
- * remote-sim.c (gdb_os_error): New function.
- (init_callbacks): Fix initializing of gdb_callback. Add gdb_os_error.
- (gdb_os_printf_filtered): Use gdb_stdout, not stdout.
-
-Sun Dec 8 00:36:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * irix5-nat.c (supply_gregset, fill_gregset): Handle gregsets
- from O32 and N32 ABI.
- (xfer_link_map_member): Work around problem with alignments
- in struct obj when compiling GDB under N32 ABI.
-
-start-sanitize-d10v
-Thu Dec 5 23:30:44 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * d10v-tdep.c: Add support for examination and interpretation
- of instruction trace buffer.
- (trace, untrace, info trace, tdisassemble): New commands.
-
-end-sanitize-d10v
-Thu Dec 5 14:06:23 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER): Undef.
- (TARGET_BYTE_ORDER_SELECTABLE): Define.
- (BREAKPOINT): Undef.
- ({BIG,LITTLE}_BREAKPOINT): Define.
- (TM_PRINT_INSN_MACH): Redefine for sparclet.
-
-Wed Dec 4 16:34:05 1996 Geoffrey Noer <noer@cygnus.com>
-
- * config/mn10300/mn10300.mt, config/mn10300/tm-mn10300.h: New.
-
-Tue Dec 3 13:02:08 1996 Fred Fish <fnf@ninemoons.com>
-
- * infptrace.c (store_inferior_registers): Move some common code out
- to store_register, like fetch_inferior_registers & fetch_register.
- (store_register): New function, from store_inferior_registers.
- (fetch_inferior_registers, fetch_register): Minor code tweaks to
- make {fetch,store}_inferior_registers and {fetch,store}_register
- routines as similar in structure as possible.
- (fetch_inferior_registers, store_inferior_registers): Eliminate
- local variable numregs and just use ARCH_NUM_REGS directly.
-
-Tue Dec 3 11:38:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * blockframe.c: add macro USE_GENERIC_DUMMY_FRAMES to enable/disable
- code for generic call_dummy frames.
- * config/h8300/tm-h8300.h: turn on USE_GENERIC_DUMMY_FRAMES
-start-sanitize-m32r
- * config/m32r/tm-m32r.h: Ditto.
-end-sanitize-m32r
- * config/sh/tm-sh.h: Ditto.
-start-sanitize-v850
- * config/v850/tm-v850.h: Ditto.
-end-sanitize-v850
-
-Sun Dec 1 00:41:47 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * vax-tdep.c (vax_print_insn, print_insn_arg): Use info functions
- for printing. From Valeriy Ushakov <uwe@ptc.spbu.ru>.
-
-Sun Dec 1 00:40:46 1996 Geoffrey Noer <noer@cygnus.com>
-
- * configure.tgt: Add new mn10300 entry.
-
-Sun Dec 1 00:18:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- Add support for Irix 6.2 native O32 and N32 ABI.
-
- * config.in, configure.in, configure: Check for <objlist.h>.
- * configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
-
- * cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
- instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
+Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
- * dwarf2read.c: Turn warnings and recoverable errors into complaints,
- add new complaints where appropriate.
- gcc -Wall cleanup.
- (struct line_head): Change line_base from char to int to avoid
- problems with compilers whose plain char is represented by an
- unsigned char.
- (struct partial_die_info): Add is_declaration field.
- (dwarf2_tmp_obstack): New obstack for allocating temporary storage
- used during symbol reading.
- (cu_header_offset): New variable for resolving relative reference
- dies.
- (optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
- New interface variables for decode_locdesc.
- (struct dwarf2_pinfo): New structure for communication between
- psymtab and symtab reading, passed via pst->read_symtab_private.
- (dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
- without line number sections.
- (dwarf2_build_psymtabs_hard): Initialize temporary obstack
- for symbol reading.
- Allocate and initialize pst->read_symtab_private.
- Relocate pst->textlow and pst->texthigh with baseaddr.
- (scan_partial_symbols): Do not add DW_AT_declaration symbols
- to the partial symbol table.
- Add file scope enumerator symbols to the partial symbol table.
- Fix typo in highpc computation.
- If we didn't find a lowpc, set it to highpc to avoid complaints
- from `maint check.
- (add_partial_symbol): Relocate symbol values with baseaddr.
- Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
- minimal symbol table.
- Obtain symbol values for DW_TAG_variable symbols from the location
- descriptor, skip symbols with missing location desciptors.
- Skip symbols for aggregate types without children.
- Handle enumerator symbols.
- (dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
- (psymtab_to_symtab_1): Set local variables from
- pst->read_symtab_private, set cu_header_offset and baseaddr.
- Initialize temporary obstack for symbol reading, initialize
- buildsym and add a cleanup to really_free_pendings.
- Relocate highpc with baseaddr when calling end_symtab.
- If the compilation is from a C file generated by language
- preprocessors, do not set the symtab language if it was already
- deduced by start_subfile.
- Removed verbose sorting symbol table message.
- (process_die): Handle DW_TAG_ptr_to_member_type and
- DW_TAG_reference_type.
- Use read_subroutine_type to get the function type for
- DW_TAG_subprogram before calling read_func_scope.
- (read_file_scope): Initialize file name to <unknown>, start_subfile
- expects a non-NULL name.
- If we didn't find a lowpc, set it to highpc to avoid complaints
- from finish_symbol.
- Relocate lowpc and highpc with baseaddr.
- Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
- Zero out ftypes for each new compilation unit (may be different
- language or different objfile).
- Accept compilation units without line number information, pass
- comp_dir to decode_lines.
- (read_func_scope): Initialize function name to <unknown> to avoid
- core dumps when DW_AT_name is missing.
- Relocate lowpc and highpc with baseaddr.
- Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
- Pass function type to new_symbol.
- (read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
- (read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
- Handle DW_TAG_class_type.
- Copy fields to type_obstack, release temporary storage for fields.
- Don't add symbol if die is a stub die and has no children.
- Handle C++ static member fields.
- (read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
- Copy fields to type_obstack, release temporary storage for fields.
- Let new_symbol handle the symbol creation for enumerators
- instead of handcrafting a symbol.
- Determine signedness of enum type from enumerators.
- (dwarf_read_array_type): Handle variable length arrays.
- Use lookup_pointer_type instead of handcrafting a type.
- Create array type only if a DW_TAG_subrange_type was found.
- (read_tag_pointer_type, read_tag_reference_type):
- Use lookup_pointer_type and lookup_reference_type instead
- of handcrafting a type.
- (read_tag_ptr_to_member_type): New function to handle
- DW_TAG_ptr_to_member_type.
- (read_subroutine_type): Handle parameter dies.
- Use lookup_function_type instead of handcrafting a type.
- (read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
- (read_base_type): If the type has a name, use init_type to create
- a new type instead of second guessing a fundamental type.
- (read_comp_unit): Reset die reference table before building
- a new one.
- (dwarf2_read_section): Read section contents into psymbol_obstack.
- (dwarf2_read_abbrevs): Handle unterminated abbreviations
- for a compile unit gracefully.
- (read_partial_die): Zero partial die before reading its info.
- Handle DW_AT_declaration.
- Fix typo in handling of DW_FORM_block4.
- (read_full_die): Fix typo in handling of DW_FORM_block4.
- (read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
- New routines to get signed values from a buffer.
- (read_n_bytes, read_string): Allocate storage from the temporary
- obstack. If the host char size permits it, return pointer
- to buffer instead of allocating storage.
- (set_cu_language): Handle DW_LANG_Mips_Assembler.
- (dwarf_attr): Return NULL if reference die for DW_AT_specification
- or DW_AT_abstract_origin die is not found.
- (record_minimal_symbol): Removed, replaced with a direct call to
- prim_record_minimal_symbol, it now handles saving the string itself.
- (convert_locdesc): Removed, partial symtab reading now uses
- decode_locdesc.
- (dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
- offset for the die reference.
- (dwarf_decode_lines): Complain if the line section info is missing.
- Use read_1_signed_byte to extract lh.line_base to avoid
- problems with compilers whose plain char is represented by an
- unsigned char.
- Add cleanups for allocated temporary storage.
- Start a subfile for the first file in the state machine.
- Fix off by one problem with dirs.dirs access.
- Use comp_dir when directory index is 0.
- Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
- (dwarf2_start_subfile): Try to keep line numbers from identical
- absolute and relative file names in a common subfile.
- (new_symbol): Allocate symbol and symbol name on the symbol_obstack.
- Set SYMBOL_LINE from DW_AT_decl_line if present.
- Set SYMBOL_TYPE from passed type if not NULL.
- Change DW_TAG_variable symbol types with missing type entries
- to a sensible type.
- Handle optimized_out, offreg and islocal storage classes.
- Add external symbols with type information whose address isn't
- known as LOC_UNRESOLVED symbols.
- Synthesize typedefs for C++ classes, structs, unions and enumerations.
- Handle DW_TAG_enumerator symbols, complain for unrecognized
- symbol tags.
- (die_type): A missing DW_AT_type represents a void type.
- Use dwarf2_get_ref_die_offset to get the absolute offset for
- the die reference.
- (die_containing_type): New function to build type from
- DW_AT_containing_type attribut.
- (read_type_die): Handle DW_TAG_ptr_to_member_type.
- Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
- (dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
- fundamental type.
- (create_name): Removed, symbol name allocation is now done
- in new_symbol.
- (dump_die): Use print_address_numeric to print a CORE_ADDR.
- (dwarf2_empty_die_ref_table): New function to clear the die
- reference table.
- (dwarf2_get_ref_die_offset): New function to get the absolute
- die offset from a die reference attribute.
- (decode_locdesc): Complete rewrite using a stack, code mostly
- borrowed from dwarfread.c:locval.
- (dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
- (dwarf_alloc_block): Allocate block on temporary obstack.
+ * debugify.c, debugify.h: New files. Provide common macros
+ for writing debug info to a log file or stdio.
- * elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
- skip section name symbols and relocate all others.
- (elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
+Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
- * irix5-nat.c (fetch_core_registers): Handle core_reg_sect
- from N32 executables. Call registers_fetched after extracting
- the registers.
- (obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
- definitions to enable support of O32 and N32 format objlists.
- (struct so_list): New members offset, so_name and lmstart to
- eliminate dependencies from the objlist format used.
- (solib_map_sections, symbol_add_stub, solib_add,
- info_sharedlibrary_command, solib_address, clear_solib): Use
- so_name and LM_OFFSET.
- (first_link_map_member): Rewrite to enable support of O32 and N32
- format objlists.
- (next_link_map_member, xfer_link_map_member): New functions to
- support O32 and N32 format objlists.
- (find_solib): Use first_link_map_member, next_link_map_member and
- xfer_link_map_member.
- (solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
- host signal numbers.
+ * c-valprint.c (c_val_print): Fix printing for arrays defined
+ with 0 length. A sticky tag caused this fix from
+ revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
+ state: Exp; lines: +1 -0 branches: 2.32.34;
+ to not make it into devo.
- * mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
- Pass CORE_ADDR variant to add_psymbol_to_list.
+Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
- * mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
- if we encounter a positive stack adjustment. Handle `move $30,$sp'.
- Handle `sd reg,offset($sp)' for 32 bit ABIs.
-
- * symmisc.c (dump_msymbols, print_partial_symbols): Use
- print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
- (dump_symtab): Print compilation directory if it is not NULL.
-
- * valops.c (search_struct_field, value_struct_elt_for_reference):
- Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
- address of a static member.
-
-Thu Nov 28 00:46:24 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * vax-tdep.c (vax_print_insn): Made static, modified to take
- disassemble_info as parameter.
- (_initialize_vax_tdep): New function to initialize tm_print_insn
- to vax_print_insn.
-
-Wed Nov 27 11:29:06 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * blockframe.c: Remove old-style CALL_DUMMY code.
- * h8300-tdep.c, config/h8300/tm-h8300.h: Ditto.
-start-sanitize-m32r
- * m32r-tdep.c, config/m32r/tm-m32r.h: Ditto.
-end-sanitize-m32r
- * sh-tdep.c, config/sh/tm-sh.h: Ditto.
-start-sanitize-v850
- * v850-tdep.c, config/v850/tm-v850.h: Ditto.
-end-sanitize-v850
-
-Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
- * blockframe.c: Add target-independant support for managing
- CALL_DUMMY frames on the host side.
- * frame.h: Declarations for generic CALL_DUMMY frame support.
- * h8300-tdep.c: Add target function calls using generic frame support.
- * config/h8300/tm-h8300.h: config for generic target function calls.
-start-sanitize-m32r
- * m32r-tdep.c: Add target function calls using generic frame support.
- * config/m32r/tm-m32r.h: config for generic target function calls.
-end-sanitize-m32r
- * sh-tdep.c: Add target function calls using generic frame support.
- * config/sh/tm-sh.h: config for generic target function calls.
-start-sanitize-v850
- * v850-tdep.c: Add target function calls using generic frame support.
- * config/v850/tm-v850.h: config for generic target function calls.
-end-sanitize-v850
- * valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
- done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
-
-Tue Nov 26 19:21:35 1996 Mark Alexander <marka@cygnus.com>
-
- * config/mips/tm-mips.h (ADDR_BITS_REMOVE, TARGET_READ_SP): Define.
- (mips_addr_bits_remove): Declare.
- * mips-tdep.c (mips_push_dummy_frame): Fix heuristic-fence-post
- errors when hitting breakpoints during inferior function calls
- in 64-bit programs.
- (fix_sign_extension): Make public, rename to mips_addr_bits_remove.
- * utils.c (paddr_nz, preg_nz): New functions, similar to
- paddr and preg but don't print leading zeroes.
- * defs.h (paddr_nz, preg_nz): Declare.
- * remote-mips.c: Use paddr_nz instead of paddr throughout
- to reduce packet size.
- (pmon_end_download): Improve timeout error handling.
-
-Tue Nov 26 17:21:37 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure: Rebuild with autoconf 2.12.
-
-Mon Nov 25 13:17:16 1996 Fred Fish <fnf@ninemoons.com>
-
- From: Paul Eggert <eggert@twinsun.com>
- * remote-bug.c (wait_strings): Avoid creating a trigraph.
-
-start-sanitize-d10v
-Fri Nov 22 15:55:22 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * valops.c (value_at, value_fetch_lazy): Put in D10V call
- to fix up address pointers.
- * values.c (value_from_longest): Removed previous d10v changes.
- * config/d10v/tm-d10v.h (TARGET_PTR_BIT): Change to 4 bytes.
-
-end-sanitize-d10v
-Fri Nov 22 10:06:19 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/i386/nm-i386v4.h (LOSING_POLL): Define, needed for
- Unixware 1.1.2.
-
-Thu Nov 21 19:13:58 1996 Mark Alexander <marka@cygnus.com>
-
- * mips-tdep.c: Replace hard-coded constants with MIPS_INSTLEN.
- (common_breakpoint): Use paddr instead of %x to print 64-bit values.
- (heuristic_proc_desc): Add tests for 64-bit instructions.
- (init_extra_frame_info, mips_push_arguments): Recognize additional
- registers for EABI.
- * remote-mips.c: Extend DDB target to allow TFTP downloads.
- * config/mips/tm-mips.h (MIPS_LAST_ARG_REGNUM, MIPS_NUM_ARG_REGS):
- Define.
-
-Wed Nov 20 19:09:16 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * infcmd.c (do_registers_info): Call val_print with the
- virtual buf instead of the raw buf. Needed for REGISTER_CONVERT
- to work with non-floating point regs.
-
-start-sanitize-d10v
- * d10v-tdep.c (d10v_skip_prologue): If we have line debugging
- information, then the end of the prologue should the first
- assembly instruction of the first source line.
-
- * values.c (value_from_longest): Put in D10V call to
- fix up address pointers.
-
- * config/d10v/tm-d10v.h (REGISTER_VIRTUAL_SIZE): Modified.
- (REGISTER_VIRTUAL_TYPE): Modified for PC_REGNUM and SP_REGNUM.
- (REGISTER_CONVERTIBLE): Make PC and SP convertible.
- (REGISTER_CONVERT_TO_VIRTUAL): Define.
- (REGISTER_CONVERT_TO_RAW): Define.
- (D10V_MAKE_DADDR): Define.
- (D10V_MAKE_IADDR): Define.
-end-sanitize-d10v
-Wed Nov 20 16:15:15 1996 Geoffrey Noer <noer@cygnus.com>
-
- * config/i386/cygwin32.mh: add MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
- -DMMCHECK_FORCE=1 so memory checks are loaded for cygwin32 gdb
-
-Wed Nov 20 00:43:09 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * callback.h: Delete, moved to ../include.
- * callback.c: Delete, moved to ../sim/common.
- * Makefile.in (SFILES,COMMON_OBJS): Delete callback.[co].
- (callback.o): Delete rule.
- * remote-sim.h: No longer include callback.h.
- (sim_callback_write_stdout): Delete prototype.
- * remote-sim.c (init_callbacks,end_callbacks): New functions.
- (gdb_os_write_stdout, gdb_os_printf_filtered): New functions.
- (gdb_callback, callbacks_initialized): New static globals.
- (gdbsim_open): Call init_callbacks.
- (gdbsim_close): Call end_callbacks.
- (simulator_command): Call init_callbacks.
-
- * config/h8300/h8300.mt (SIM): Change to ../sim/h8300/libsim.a.
- * config/h8500/h8500.mt (SIM): Change to ../sim/h8500/libsim.a.
-
-start-sanitize-gdbtk
-Tue Nov 19 09:26:14 1996 Tom Tromey <tromey@cygnus.com>
-
- * gdbtk.c (gdbtk_readline): Fix memory leak.
-
-Mon Nov 18 23:43:05 1996 Tom Tromey <tromey@cygnus.com>
-
- Fixes for Tcl 7.6 / Tk 4.2:
- * gdbtk.tcl (apply_filespec): Use tk_getOpenFile.
- Remove old fileselect code.
- * gdbtk.c (Tcl_Alloc): Rename from Tcl_Malloc.
-
-end-sanitize-gdbtk
-Mon Nov 18 15:58:05 1996 Jim Wilson <wilson@cygnus.com>
-
- * config/mips/tm-mips.h (FIX_CALL_DUMMY): Change unsigned LONGEST
- to ULONGEST.
-
-Fri Nov 15 15:34:18 1996 Fred Fish <fnf@cygnus.com>
-
- From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
- * procfs.c (wait_fd): Handle EINTR error return from poll
- by restarting the poll.
- * defs.h (PIDGET): Define a default version that just
- returns its argument unchanged.
- * inflow.c (terminal_init_inferior): Eliminate #ifdef
- of PIDGET and fold both alternatives into common code.
- (pass_signal): Use PIDGET for pid passed to kill().
-
-Thu Nov 14 15:54:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * utils.c (paddr,preg): Use a static variable initialized to 32
- instead of doing addr>>32 to eliminate a warning produced by GCC
- on 32-bit systems.
-
-start-sanitize-d10v
- * config/d10v/tm-d10v.h (ULONGEST): Define.
-
-end-sanitize-d10v
-Tue Nov 12 12:25:27 1996 Jim Wilson <wilson@cygnus.com>
-
- * c-typeprint.c (cp_type_print_method_args): Pass -1 for show in
- recursive call to type_print.
-
-Tue Nov 12 12:18:29 1996 Jim Wilson <wilson@cygnus.com>
-
- * defs.h (ULONGEST): New macro.
- * alpha-tdep.c, breakpoint.c, c-exp.y, ch-exp.c, convex-xdep.c,
- corefile.c, defs.h, f-exp.y, findvar.c, gdbcore.h, m2-exp.y,
- m88k-tdep.c, printcmd.c, remote-hms.c, remote-mips.c, sparc-tdep.c,
- valarith.c, valops.c, values.c, config/gould/tm-np1.h,
- config/mips/tm-mips.h, mswin/prebuilt/gdb/cexptab.c,
- mswin/prebuilt/gdb/fexptab.c, mswin/prebuilt/gdb/m2exptab.c:
- Change all occurances of unsigned LONGEST to ULONGEST.
-
- * configure.host (mips-sgi-irix6): Add.
-
-Tue Nov 12 12:16:40 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * sh-tdep.c: Add functionality for target function calls.
- * config/sh/tm-sh.h: Add support for target function calls.
+ * defs.h: Fix cntl-C to read from the Windows message queue.
+ Add prototypes for make_final_cleanup (and the other cleanup
+ routines.
+ * remote-e7000.c: Fix sync code to timeout if unable to sync.
+ Change sync code to report status while trying to sync-up
+ with hardware. Add debugging output and document.
+ * ser-e7kpc.c: Swap order of len & offset to match implementation.
+ Add debugging output and document.
+ * serial.c: Add debugging output.
+ * top.c: Add call to do_final_cleanups.
+ Remove conditionals preventing Win32 from getting SIGQUIT.
+ * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
+ chain as a parameter. Extract this generic code from the cleanup
+ routines into separate funtions (*_my_cleanup). Keep old
+ functionality by passing "cleanup_chain" to the new funtions.
+ Define the cleanup chain "final_cleanup_chain" to be a cleanup
+ chain which will be executed only when gdb exits. Add functions
+ (*_final_cleanup) to match the original (*_cleanup) functions.
+ (pollquit, quit, notice_quit): Fix to read cntl-C from the
+ Windows message queue.
start-sanitize-m32r
-Tue Nov 12 12:06:58 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * m32r-tdep.c: Add functionality for target function calls.
- * valops.c: Small change to support target function calls.
- * config/m32r/tm-m32r.h: Add support for target function calls.
-end-sanitize-m32r
-
-Mon Nov 11 17:15:59 1996 Geoffrey Noer <noer@cygnus.com>
-
- * defs.h: Modify Nov 11 12:59:00 change so _MSC_VER is checked
- instead of _WIN32.
- * win32-nat.c: Fix Nov 11 12:59:00 change (windows.h should
- be included instead of windefs.h for compilers other than
- VC++).
- * mswin/windefs.h: Remove ^Ms and change C++ style comments
- to C style comments.
-
-Mon Nov 11 14:32:38 1996 Mark Alexander <marka@cygnus.com>
-
- * utils.c (get_cell): Fix off-by-one bug.
- * mips-tdep.c (get_frame_pointer, fix_sign_extension):
- New functions to consolidate common code.
- (mips_frame_chain, init_extra_frame_info): Use new functions
- to fix problems with backtrace and finish commands on ddb board.
-
-Mon Nov 11 12:59:00 1996 Dawn Perchik <dawn@critters.cygnus.com>
-
- * mips-tdep.c, remote-mips.c, values.c, mdebugread.c,
- config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support.
- * defs.h: Cleanup; add prototypes.
- * corefile.c: Change FIXME #ifdef
- * win32-nat.c: Include windefs instead of windows.h.
- * utils.c: Add routines for printing addresses and registers
- based on type size.
-
-Sat Nov 9 01:05:10 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-tdep.c (heuristic_proc_desc): Stop examining the prologue
- if we encounter a positive stack adjustment.
- (find_proc_desc): If heuristic_fence_post is non-zero, use
- heuristic_proc_start to determine the start of a function before
- calling heuristic_proc_desc.
-
- * coffread.c (coff_symtab_read): Change minimal symbol types
- for C_LABEL symbols from mst_* to mst_file_*.
+Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
- * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
+ * m32r-rom.c: #include <sys/types.h>.
+ #ifdef out new load support if wingdb.
+ * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
- * configure.in: Handle error message from sun3 native ld when
- configuring HLDFLAGS.
- * configure: Regenerated with autoconf.
-
- * c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
- * cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
- that the virtual base pointer from an user object still points to
- accessible memory.
-
- * dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
- clear the recently added header_files fields.
- (dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
-
-Fri Nov 8 14:30:23 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * config/tm-sh.h: Added a missing comma in middle of
- REGISTER_NAMES list.
-
-Fri Nov 8 12:29:51 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.c: Fix some formatting and comments.
-
- * remote-sim.c (simulator_command): Set up callbacks before
- entering the simulator.
-
-start-sanitize-d10v
-Thu Nov 7 15:19:08 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-tdep.c: Fix some problems with inferior function calls.
- * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Change dummy to be
- a pointer to the dummy's stack instead of just a flag.
-
-end-sanitize-d10v
-start-sanitize-m32r
-Tue Nov 5 10:21:02 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * m32r-tdep.c: Improved frame_chain and fn prologue analysis.
- * config/tm-m32r.h: Add framesize and register to extra_frame_info.
end-sanitize-m32r
+Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
-Tue Nov 5 10:08:07 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * mswin/gdbwin.h: Remove bogus definition of CORE_ADDR.
- * mswin/srcwin.cpp (CSrcScroll1::CSrcScroll1): Initialize depth
- to fix divide-by-zero problem with clicking on source window.
-
-Mon Nov 4 00:48:37 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * mswin/recordit: Fix problem with absolute paths.
- * mswin/recordit: Fix problem with relative paths.
-
-Sun Nov 3 18:06:42 1996 Stu Grossman (grossman@critters.cygnus.com)
- * mswin/{Makefile.in configure configure.in}: New files for
- configuring wingdb under Unix.
+ * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
+ * mn10200-tdep.c (mn10200_store_struct_return): New function.
-Sat Nov 2 03:54:13 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+ * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
+ extracting a return value from a register pair.
- * irix5-nat.c, osfsolib.c, solib.c (symbol_add_stub): Handle
- missing or zero-sized .text sections properly.
- * mdebugread.c: Handle scRConst and scSUndefined storage classes.
- * stabsread.c (scan_file_globals): Try to resolve symbols
- for shared libraries from the minimal symbol table of the main
- executable first.
-
-start-sanitize-d10v
-Fri Nov 1 13:59:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-tdep.c, config/d10v/tm-d10v.h: Major fixes to support
- inferior function calls and proper stack backtracing on D10V-EVA
- board.
-
-end-sanitize-d10v
-Fri Nov 1 10:50:51 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/linux.mh (NATDEPFILES): Fix up things so that it
- links.
- (GDBSERVER_DEPFILES,TERMCAP): Ditto.
+ * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
+ be two byte aligned. Round argument sizes up to two byte boundary.
+ Write out args in two byte hunks.
+ (mn10200_push_return_address): Implement.
+ * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
+ structures > 8 bytes (temporary).
+ (STORE_RETURN_VALUE): Likewise.
+ (CALL_DUMMY): No longer undefine.
+ (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
+ (REG_STRUCT_HAS_ADDR): Define.
+
+start-sanitize-r5900
+Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
+
+ * configure.tgt: added r5900.
+
+end-sanitize-r5900
+Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
+
+ * mips-tdep.c (non_heuristic_proc_desc): New function.
+ (find_proc_desc): Move non-heuristic proc search code into separate
+ function.
+ (gdb_print_insn_mips): Use non-heuristic method to find procedure
+ descriptor, to avoid prologue examination when disassembling.
+ * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
+ aka MicroMeteor board).
+ (mips_exit_debug): Prevent protocol reinitialization if an error
+ occurs while exiting debug mode.
+
+Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
+
+ * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
+ comments, formatting, etc. Plus other minor fixes for problems
+ I found during my first pass over the mn10200 port.
+ (mn10200_analyze_prologue): New function.
+ (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
+ * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
+ comments, formatting, etc. Minor fixes for problems I found during
+ my first pass over the mn10200 port.
+ (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
+ pointers.
+ (REGISTER_VIRTUAL_TYPE): Define as a long.
+ (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
+ in register pairs.
+ (STORE_RETURN_VALUE): Similarly.
+
+ * blockframe.c (generic_get_saved_regs): Remove unused variable
+ "addr".
+ * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
+ inside #ifdef CALL_DUMMY.
+ (watch_command_1): Initialize target_resources_ok.
+ * command.c (do_setshow_command): Provide dummy initialization
+ for "match".
+ * valops.c (find_function_addr): Move function & prototype inside
+ #ifdef CALL_DUMMY.
+ (value_arg_coerce): Similarly.
+ (value_of_variable): Provide dummy initialization of "frame".
+
+Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
+ This fixes PR 11323, where gdbtk stops responding if an error occurs.
+
+Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
+
+ * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
+ to prim_record_minimal_symbol_and_info call that was missed in Jan 3
+ change.
+ (scan_xcoff_symtab): Ditto.
- * monitor.c (dev_name,targ_ops): Move static variables before
- first use, to avoid compiler warnings.
+Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
+
+ * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
+ from being sent to 32-bit targets by masking off upper bits.
+ * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
+ of PC on 32-bit targets.
+ (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
+ frame setup instruction.
+ (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
+ (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
+ prologue instruction. Fix warnings and bugs found by gcc -Wall.
+ * buildsym.c (finish_block): Improve handling of overlapping blocks;
+ fixes problem on MIPS16 printing function arguments.
+
+Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * dwarf2read.c (dwarf2_linkage_name): New function to get
+ the linkage name of a die from DW_AT_MIPS_linkage_name or
+ DW_AT_name.
+ (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
+ new_symbol): Use it instead of accessing DW_AT_name.
+ (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
+ partial die if present.
+ (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
+
+Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
+
+ * blockframe.c (generic_frame_chain_valid): If the new frame
+ is not INNER_THAN the old frame, then it's not valid.
+
+Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
+
+ * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
+ (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
+
+Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
+
+ * mips-tdep.c (mips16_decode_reg_save): Distinguish between
+ sd and sw instructions correctly.
+ (heuristic_proc_start): Add support for MIPS16.
+ (mips16_get_imm, mips16_heuristic_proc_desc,
+ mips32_heuristic_proc_desc): New helper functions for
+ heuristic_proc_desc.
+ (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
+ (mips_push_arguments): Don't align small arguments in EABI.
+ (mips32_skip_prologue): Attempt to shrink code size a little.
start-sanitize-m32r
-Thu Oct 31 16:37:17 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * m32r-tdep.c: Improved frame_chain and fn prologue analysis.
- * configure.tgt: Add entry for m32r target.
- * monitor.h: Add a flag to tell monitor_store_register to use
- (val, regno) instead of (regno, val).
- * monitor.c: Make monitor_store_register honor the above flag.
- Make monitor_exp ignore DC1/DC3 for m32r.
- Increase buf size in monitor_dump_regs.
+Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
-Wed Oct 30 18:14:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * m32r-tdep.c, m32r-rom.c: New files.
- * config/m32r/m32r.mt: New file.
- * config/m32r/tm-m32r.h: New file.
+ * m32r-stub.c: New -- remote protocol support for M32R cpu.
+ * m32r-rom.c: Several experiments with improved download time.
+ * .Sanitize: Add entry for m32r-stub.c
end-sanitize-m32r
-Tue Oct 29 16:56:01 1996 Geoffrey Noer <noer@cygnus.com>
-
- * config/i386/xm-cygwin32.h:
- * config/powerpc/xm-cygwin32.h:
- add #define LSEEK_NOT_LINEAR so source lines aren't unexpectedly
- truncated.
-
-Tue Oct 29 18:36:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/tm-ppc-eabi.h (TARGET_BYTE_ORDER_SELECTABLE):
- Define.
-
-Tue Oct 29 14:59:20 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * TODO: Add item suggesting an "info bfd" command.
-
-start-sanitize-d10v
-Tue Oct 29 12:48:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-tdep.c: Snapshot that supports D10V-EVA board.
-
- * config/d10v/tm-d10v.h (REGISTER_NAMES): Add imap0,imap1,dmap.
- (TARGET_READ_FP,TARGET_WRITE_FP): Define.
-
-end-sanitize-d10v
-Mon Oct 28 17:34:24 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * mswin/genmakes mswin/recordit: New scripts to generate make
- files for MSVC.
-
-Sun Oct 27 20:18:04 1996 Mark Alexander <marka@cygnus.com>
-
- * config/mips/{tm-vr5000.h,tm-vr5000el.h,vr5000.mt,vr5000el.mt}:
- New files.
- * configure.tgt: Modify cases for vr5000 to use new files.
-
-Sat Oct 26 07:15:14 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/alpha/alpha-osf3.mh (XM_CLIBS): Add -lm for OSF/1-4.0.
-
- * procfs.c (proc_set_exec_trap): Under Alpha OSF/1-4.0, tracing
- the entry to the exit system call to detect termination of the
- inferior stopped working. Trace termination of the inferior via
- PRFS_STOPTERM instead.
- (procfs_init_inferior): Do not trace entry to exit system call
- if PIOCSSPCACT is defined.
- (procfs_wait): Handle PR_DEAD event, which signals the termination
- of the inferior if PRFS_STOPTERM is set.
-
- * mdebugread.c (parse_partial_symbols): Ignore stNil section
- start address symbols.
-
- * sparc-tdep.c (get_saved_register): Get saved PC from the
- frame info if not in innermost frame.
-
-Thu Oct 24 10:51:45 1996 Mark Alexander <marka@cygnus.com>
-
- * dbxread.c (process_one_symbol): Interpret end-of-function
- markers correctly; this fixes problem on Vr5000 where all
- functions in a module had the same address.
- * configure.in, configure.tgt, configure.host, gdbserver/configure.in:
- Correct for pc-linux-gnu problem in config.guess.
- * configure: Regenerate.
-
-Thu Oct 24 10:06:58 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * dbxread.c: Don't swap symbols in place, since internal and
- external forms may have different sizes. Don't assume that an
- internal_nlist has the same layout as an external_nlist. Create
- symbol for n_strx element so to hide specifics of nlist from
- partial-stab.h.
- * partial-stab.h: Don't reference dbxread symbols directly. Use
- CUR_SYMBOL_STRX instead.
- * config/i386/xm-windows.h: Define SIGQUIT and SIGTRAP.
-
-start-sanitize-v850
- * config/v850/tm-v850.h: Define PS_REGNUM and TARGET_V850 for
- MSVC builds.
- * mswin/gdbwin.c (reg_order): Define register order for V850.
- * mswin/gui.cpp (CGuiApp::InitInstance): Define target name for
- V850.
- * mswin/regdoc.h: Define MAXREGS for V850.
-end-sanitize-v850
-start-sanitize-v850
-Tue Oct 22 16:28:20 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * v850-tdep.c (scan_prologue): Changes to deal with scheduled
- prologues correctly. First, prologue end is now defined by
- presence of a branch, jump or call insn. Second, can no longer
- fix frame offsets because we may not know the offset until after a
- register has been saved.
- * (v850_init_extra_frame_info): Fixup frame offsets here because
- we have all the info at this time.
- * (v850_frame_chain): Use new calling convention for scan_prologue.
-
-end-sanitize-v850
-start-sanitize-d10v
-Tue Oct 22 10:25:29 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-tdep.c, config/d10v/tm-d10v.h: Changes to allow stack
- backtraces and inferior function calls.
-
-end-sanitize-d10v
-Tue Oct 22 10:32:46 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Update init.c editing to work with Oct 8 change.
- (@HLDFLAGS@): Always edit out.
-
-Mon Oct 21 18:17:08 1996 Mark Alexander <marka@cygnus.com>
-
- * mdebugread.c (parse_partial_symbols): Fix 64-bit
- sign-extension problems in calculating psymtab addresses.
- * buildsym.c (end_symtab): Use macro to pop context.
-
-start-sanitize-v850
-Mon Oct 21 14:40:50 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * v850-tdep.c: Cleanup lots of things. Add many comments.
-
- * v850-tdep.c (v850_init_extra_frame_info v850_frame_chain): Fix
- sign bugs with scanning prologues. Get a little smarter about
- calculating the length of uninteresting instructions.
-
-end-sanitize-v850
-Mon Oct 21 14:01:38 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * top.c: Add new commands "set annotate" and "show annotate".
-
-Sun Oct 20 04:38:39 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * corelow.c (core_close): Clear inferior_pid only if there is
- an open core_bfd.
-
- * cp-valprint.c (cp_print_value_fields): Pass correct address
- to val_print, not 0.
-
- From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de):
- * eval.c (evaluate_subexp_standard) [case BINOP_REPEAT]: Chase
- typedefs before checking for integral type of right operand.
-
-Fri Oct 18 17:26:22 1996 Mark Alexander <marka@cygnus.com>
-
- * mdebugread.c (parse_symbol): Fix crash when malloc has
- no type info and void type has no associated pointer type.
-
-Thu Oct 17 18:18:20 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.host: New file, host configuration mapping.
- * configure.tgt: New file, target configuration mapping.
- * configure.in: Remove host and target mapping.
- * configure: Rebuild.
-
-Wed Oct 16 17:46:03 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * breakpoint.c (must_shift_inst_regs): New global.
- (bpstat_stop_status): Change #if uses of DECR_PC_AFTER_BREAK into
- equivalent expression uses.
- * infrun.c (wait_for_inferior): Ditto.
-
-start-sanitize-v850
-Wed Oct 16 01:53:43 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * v850-tdep.c (v850_push_arguments): Use symbolic names for arg
- registers.
- * config/v850/tm-v850.h: Change FP to 29. Define arg regs.
-
-end-sanitize-v850
-Tue Oct 15 16:30:07 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in (init.c): Don't use -s option with grep. It means
- something different under Digital Unix.
-
- * buildsym.c (finish_block): Treat LOC_BASEREG_ARG and
- LOC_LOCAL_ARG as arguments so that GDB will know about function
- args declared this way. Mostly affects dwarf.
- * dwarfread.c (decode_die_type): Change default type from int to
- void. This allows GDB to recognize void functions.
- * (new_symbol): If AT_PROTOTYPED is present, set a flag in the
- type structure.
- * findvar.c (extract_floating store_floating): Clean up comments
- to reflect reality.
- * gdbtypes.h: Add TYPE_FLAG_PROTOTYPED so that we can tell if a
- function has a prototype. Currently, only dwarf supports this.
- * utils.c (floatformat_from_doublest): Fix logic error with
- converting from double to float. (It wasn't shifting mant_long if
- it had a hidden bit.)
-
-start-sanitize-v850
- * v850-tdep.c: Add support for function calling. Fix some
- problems with debugging code w/o debug symbols.
- * config/v850/tm-v850.h: Ditto.
-
-end-sanitize-v850
-Tue Oct 15 18:19:42 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * utils.c: Always ensure that size_t is defined. Check
- HAVE_STDDEF_H rather than __STDC__
- (xmalloc, xrealloc): Use size_t rather than long.
-
-Tue Oct 15 14:24:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * config/powerpc/tm-ppc-eabi.h: Undefine NO_SINGLE_STEP so targets
- can use single-step commands.
-
-Sun Oct 13 11:38:25 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR is non-zero,
- follow typedefs before checking TYPE_CODE for structures and unions.
-
-Fri Oct 11 15:43:54 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * frame.h: Move definition of struct frame_saved_regs to before
- struct frame to make it possible to use frame_saved_regs in
- EXTRA_FRAME_INFO macro.
-
+Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
+
+ * mips-tdep.c (MIPS16_INSTLEN): Define.
+ (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
+ (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
+ of function on MIPS16.
+ (mips32_skip_prologue, mips16_skip_prologue): New helper functions
+ for mips_skip_prologue.
+ (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
+
+Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
+ ../sim/common/libcommon.a.
+
+Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * blockframe.c: fix a null pointer ref in generic_get_saved_register
+
+Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
+ working.
+
+Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
+
+First set of changes for mips16:
+ * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
+ MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
+ (ABOUT_TO_RETURN): Call new function mips_about_to_return.
+ (mips_breakpoint_from_pc, mips_about_to_return): Declare.
+ * mem-break.c (memory_breakpoint_from_pc): New function.
+ (memory_insert_breakpoint, memory_remove_breakpoint): Use
+ memory_breakpoint_from_pc to determine breakpoint contents and size.
+ * target.h (memory_breakpoint_from_pc): Declare.
+ * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
+ to determine size of breakpoint instruction.
+ * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
+ New helper functions for mips_find_saved_regs.
+ (mips_find_saved_regs): Recognize mips16 prologues.
+ (mips_addr_bits_remove): Strip off upper 32 bits of address
+ when target CPU is 32 bits but CORE_ADDR is 64 bits.
+ (mips_step_skips_delay): No branch delay slot on mips16.
+ (gdb_print_insn_mips): Disassemble mips16 code.
+ (mips_breakpoint_from_pc, mips_about_to_return): New functions.
+
+Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
+
+ * tm-mn10200.h (NUM_REGS): Decrease to 12.
+ (REGISTER_NAMES): Elimination registers not found on the mn10200.
+ (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
+ (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
+
+Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * dwarf2read.c: Replace integral tag, name and form fields in
+ internal structure definitions with the corresponding enumeration
+ types from dwarf2.h. Add default cases to switches on enumerations
+ where appropriate.
+ Make quoting of string arguments in complaint messages consistent.
+ Check for NULL returns from DW_STRING.
+ (struct partial_die_info): Add sibling and has_type fields, remove
+ unused value field.
+ (DW_*): Move access macro definitions near the definition of the
+ attribute structure.
+ (struct field_info): New structure to pass information about fields
+ and member functions between die processing routines.
+ (dwarf2_build_psymtabs_hard): Set cu_header_offset.
+ (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
+ the partial symbol table if the DW_AT_*_pc attributes are missing.
+ Add file scope base type definitions to the partial symbol table.
+ Skip over child dies if the die has a sibling attribute.
+ (add_partial_symbol): Enter global variables with type attributes
+ and without location descriptors into the partial symbol table.
+ Store value of DW_TAG_variable dies in the partial symbol table.
+ Do not enter global variables into the minimal symbol table.
+ Add base type definitions to the partial symbol table.
+ (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
+ (process_die): Move check for DW_AT_low_pc to read_func_scope.
+ Add a typedef symbol for base type definitions to the symbol table.
+ Ignore DW_TAG_inlined_subroutine tags for now.
+ (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
+ (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
+ to determine pc bounds, ignore dies with invalid bounds.
+ (dwarf2_get_pc_bounds): New routine to extract and validate the
+ DW_AT_*_pc attributes of a die.
+ (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
+ dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
+ New functions to handle fields and member functions.
+ (read_structure_scope): Rewritten to use them.
+ (read_array_type): Renamed from dwarf_read_array_type.
+ Default upper array bound to describe an array with unspecified
+ length.
+ Create array types in backwards order, as dwarf2 puts out the array
+ dimensions from left to right.
+ (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
+ DW_AT_artificial and DW_AT_prototyped.
+ (read_base_type): Make an unsigned type for DW_ATE_boolean.
+ Pass objfile to dwarf_base_type.
+ (read_partial_die): Use read_attribute to read in the attributes.
+ Handle DW_AT_sibling and DW_AT_type.
+ Follow references when determining DW_AT_name and DW_AT_external
+ attributes of the die.
+ Validate DW_AT_*_pc attributes.
+ (read_full_die): Use read_attribute to read in the attributes.
+ (read_attribute): New function to read an attribute described
+ by an abbreviated attribute.
+ (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
+ Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
+ SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
+ Change symbol class for global variables with a zero valued location
+ descriptor to LOC_UNRESOLVED.
+ Handle DW_AT_const_value attributes for DW_TAG_variable,
+ DW_TAG_formal_parameter and DW_TAG_enumerator.
+ Build a typedef symbol for DW_TAG_base_type.
+ (dwarf2_const_value): New routine to copy a constant value from an
+ attribute to a symbol.
+ (dwarf_base_type): Use passed in objfile, not current_objfile
+ when calling dwarf2_fundamental_type.
+ (dump_die): Use DW_* accessor macros to access values of attributes.
+ (decode_locdesc): Handle DW_OP_plus_uconst.
+
+Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * mn10200-tdep.c: New file.
+ * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
+ SP_REGNUM and FP_REGNUM are different, also no lar or lir.
+ * config/mn10200/mn10200.mt: New file.
+ * configure.tgt: add mn10200 entry.
+
+Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
+
+ * configure.in configure: Check if host has libdl if doing
+ Solaris threads.
+
+Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * mn10300-tdep.c: Wrote/fixed implementations of
+ mn10300_frame_chain, mn10300_init_extra_frame_info,
+ mn10300_frame_saved_pc
+ * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
+ and INIT_FRAME_PC macros.
+
+Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
+
+ * configure.in configure: Check if host has libm. Make sure we
+ are using gcc when using the -export-dynamic option. Fixes a
+ problem with building under Solaris/SunPro cc.
+
+Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
+
+ * config/mips/{embed,embed64,embedl,embedl64}.mt:
+ Link in simulator on MIPS embedded targets.
+
+Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * blockframe.c (frameless_look_for_prologue): Mark frames
+ with a zero PC as frameless to improve backtraces from core dumps
+ caused by dereferencing a NULL function pointer.
+
+Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
+
+Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * mn10300-tdep.c: made a lot more generic, ripping out code
+ from copied target (no more mn10300_scan_prologue,
+ init_extra_frame_info, and mn10300_fix_call_dummy calls)
+ * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
+ and INIT_FRAME_PC macros
+
+Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
+ FP_REGISTER_BYTES to compute offsets into the saved frame,
+ since it fails for SPARC targets configured without any
+ FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
+
+Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * symtab.c (fixup_symbol_section): Handle NULL symbols without
+ crashing.
+
+Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
+ ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
+ and CONFIG_OBS.
+ * configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
- * v850-tdep.c config/v850/tm-v850.h: Lotsa new functions and
- macros to make frame operations (such as backtrace) work.
-
+ * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
+ host is Windows.
end-sanitize-v850
-Fri Oct 11 14:23:50 1996 Fred Fish <fnf@cygnus.com>
-
- * dbxread.c (process_one_symbol): Check for null string directly
- rather than using strcmp against "".
- * partial-stab.h: Ditto.
-
-Fri Oct 11 12:18:32 1996 Mark Alexander <marka@cygnus.com>
-
- * gdbserver/{gdbreplay.c,low-linux.c,remote-utils.c,utils.c}:
- Make it compile on Linux and eliminate some warnings.
-
-Thu Oct 10 16:32:08 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in (init.c): Fixup final sed script to work around
- Linux bug with `p' operator.
-
-Wed Oct 9 18:02:48 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-mips.c: Use the correct name everywhere (DDB) for NEC's
- VR4300 target.
- (ddb_ops, pmon_ops): Fix the documentation strings.
-
-Wed Oct 9 07:42:44 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in (init.c): Retro HPUX grep lacks -h option. Strip
- filenames with sed instead.
-
-Tue Oct 8 15:59:44 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * defs.h: Remove decls of xmalloc and xrealloc. There is a
- conflicting definition in libiberty.h.
-
-Tue Oct 8 11:47:13 1996 Fred Fish <fnf@cygnus.com>
-
- * dbxread.c (dbx_symfile_read): Call free_pending_blocks rather
- than poking global variable (which is now static).
- * hpread.c (hpread_build_psymtabs): Ditto.
- * os9kread.c (os9k_symfile_read): Ditto.
- * xcoffread.c (xcoff_initial_scan): Ditto.
-
- * buildsym.h (free_pending_blocks): Declare here.
- (pending_blocks): Remove declaration of global symbol.
- (free_pendings): Remove declaration of global symbol.
- (make_blockvector): Declare here.
- (record_pending_block): Declare here.
-
- * dstread.c (make_blockvector): Remove static copy that was old
- clone of version in buildsym.c.
- (process_dst_block): Call record_pending_block rather than doing
- it by hand.
- (read_dst_symtab): Ditto.
-
- * buildsym.c (make_blockvector): Make global rather than static,
- (record_pending_block): New function, code moved from finish_block.
- (finish_block): Use record_pending_block.
- (free_pending_blocks): New function.
- (really_free_pendings): Call free_pending_blocks.
- (pending_blocks): Make static instead of global.
- (free_pendings): Make static instead of global.
-
-Tue Oct 8 09:03:22 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * config/i386/windows.mh config/i386/xm-windows.h:: New config
- files to support building Wingdb (built under Microsoft build
- environment).
-
- * Makefile.in: Add rule for hpux-thread.o (needs special header
- files).
- * (SUBDIRS): Remove mswin.
- * Change procedure for creating init.c. Speeds things up quite a
- bit.
- * config.in configure configure.in: Check for select, poll.
- * Check for OSF header files before including hpux-thread.o.
- * Don't configure doc or testsuite when building under MSVC.
- * findvar.c value.h (read_register_pid write_register_pid): Make
- global. Needed for hppa-tdep.c.
- * (supply_register): Don't set pid to inferior_pid when supplying
- registers.
- * hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
- FRAME_SAVED_PC.
- * (frame_saved_pc): Change name to hppa_frame_saved_pc.
- * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
- Use write_pc instead, which uses the correct pid.
- * (target_read_pc target_write_pc): Use read/write_register_pid
- instead of read/write_register to preserve the pid passed in.
- * inftarg.c (child_can_run): Add flag child_suppress_run to allow
- hpux-threads.c to override this as a runnable target.
- * config/pa/nm-hppah.h: Define target_new_objfile and
- target_pid_to_str.
- * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
- instead of frame_saved_pc.
- * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
- * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
- we can't easily determine the start file bounds with ELF.
- * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
- * hpux-thread.c: New file for HPUX/OSF thread support.
- * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
- RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
- cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
- cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
- cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
- thread support.
-
-Sun Oct 6 15:48:09 1996 Fred Fish <fnf@cygnus.com>
-
- * buildsym.c (finish_block): Change innerblock_anon_complaint to
- print the addresses as part of the complaint. Add a complaint for
- cases where the block end address is smaller than the block start
- address, in case any such conditions slip through our fixup mechanism.
- * symmisc.c (dump_symtab): Only print blockvector for primary
- symtabs, to avoid massive duplication of output due to secondary
- symtabs that point to same blockvector. Also do some minor
- formatting tweaks.
-
-Mon Oct 7 10:42:32 1996 Per Bothner <bothner@deneb.cygnus.com>
-
- Replace header_files global by per-objfile field.
- * gdb-stabs.h (struct dbx_symfile_info): Add fields header_files,
- n_header_files, n_allocated_header_files.
- * stabsread.h (header_files, n_header_files, n_allocated_header_files):
- Replace externs by macros HEADER_FILES, N_HEADER_FILES, and
- N_ALLOCATED_HEADER_FILES.
- * dbxread.c (dbx_symfile_finish): Free HEADER_FILES.
- (free_header_files, init_header-files): Don't free/init headerfiles.
- (various functions): Use macros instead of header_files globals.
- * stabsread.c (various functions): Likewise.
-
-Sun Oct 6 22:43:06 1996 Jason Merrill <jason@yorick.cygnus.com>
-
- * dwarf2read.c (read_tag_reference_type): New fn.
- (read_type_die): Call it.
- (dwarf_attr): Also look in the DIEs referred to by specification
- or abstract_origin attributes.
-
-Wed Oct 2 22:07:16 1996 Fred Fish <fnf@cygnus.com>
-
- * inferior.h (IN_SIGTRAMP): Pass pc to SIGTRAMP_START and
- SIGTRAMP_END.
- * config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END):
- Define with dummy pc arg.
- * config/m68k/tm-nbsd.h: Ditto.
- * doc/gdbint.texinfo: Document that SIGTRAMP_START and
- SIGTRAMP_END are macros that take an single argument.
-
-Mon Sep 30 20:02:45 1996 Fred Fish <fnf@cygnus.com>
-
- * defs.h: Remove define of PRIVATE_XMALLOC.
-
+ * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
+ printcmd.c valops.c value.h values.c: Add bfd_section arg to
+ value_at and value_at_lazy.
+ * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
+ Add bfd_section arg to prim_record_minimal_symbol_and_info.
+ * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
+ instead of read_memory. It takes a bfd_section arg.
+ * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
+ unnecessary cast for assignment of struct dbx_symfile_info.
+ Struct objfile now uses a real pointer instead of PTR for this
+ element.
+ * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
+ text, data and bss into dbx_symfile_info.
+ * exec.c (xfer_memory): Handle transfers for user-specified
+ sections.
+ * findvar.c (read_var_value locate_var_value): Copy bfd section
+ from the symbol to the value.
+ * gdb-stabs.h: Add section pointers for text, data and bss
+ sections.
+ * maint.c (translate address command): Add test code for overlay
+ address translation.
+ * printcmd.c (do_examine do_one_display): Now takes a bfd section
+ arg.
+ * (print_formatted x_command): Record current section along with
+ current address for repeated commands.
+ * sparc-nat.c (fetch_inferior_registers): Change
+ target_xfer_memory to target_{read write}_memory to allow changes
+ to target_xfer_memory interface for section info.
+ * symmisc.c (dump_msymbols print_symbol): Print section
+ assocaited with symbol.
+ * symtab.c (fixup_symbol_section): New routine to
+ add section info to symbols returned by lookup_symbol.
+ * symtab.h (struct general_symbol_info): Add bfd section to
+ symbols.
+ * target.c target.h (target_xfer_memory): Add bfd section to
+ args.
+ * (target_read_memory_section): New routine to read data from a
+ specific section.
+ * (target_memory_bfd_section): New global variable to pass bfd
+ section in to targets.
+ * valarith.c (value_add value_addr value_array): Preserve bfd
+ section when computing new value.
+ * value.h (struct value): Add bfd section to values.
+ * values.c (allocate_value value_copy): Initialize/preserve bfd
+ section.
+ * (unpack_double): Clean up _MSC_VER conditionals to remove
+ duplicate code.
start-sanitize-v850
-Mon Sep 30 15:39:28 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * config/v850/tm-v850.h: Use distinct register for PC, not EIPC.
-
+ * v850ice.c: New module to support communication with NEC's
+ PC-based ICE.
+ * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
+ ep names with rxx names. sp and fp are renamed via a different
+ mechanism.
end-sanitize-v850
-Mon Sep 30 11:16:34 1996 Jeffrey A Law (law@cygnus.com)
-
- * top.c (execute_control_command): Free values from while_control
- and if_control conditions after evaluation to avoid storage leaks.
- From Peter Schauer.
-
-start-sanitize-v850
-Fri Sep 27 17:43:06 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * configure configure.in: Recognize v850 target.
- * v850-tdep.c: New file, NEC V850 target support.
- * config/v850/{v850.mt tm-v850.h}: New files for NEC V850 support.
-
-end-sanitize-v850
-Fri Sep 27 14:48:15 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * infrun.c (wait_for_inferior): Update current_line and
- current_symtab when stepping continues in the middle of a new line.
-
-Fri Sep 27 10:25:30 1996 Fred Fish <fnf@cygnus.com>
-
- * top.c (print_gdb_version): Rewrote to comply with new GNU coding
- standards for the --version option.
- (print_gnu_advertisement): Remove, now part of print_gdb_version.
- (show_version): Remove call to print_gnu_advertisement.
- * top.h (print_gnu_advertisement): Remove prototype.
- * main.c (print_gdb_help): Move help to static function and
- add prototype.
- (main): Call print_gdb_help rather than inlining it.
- (main): Remove call to print_gnu_advertisement.
-start-sanitize-gdbtk
- * gdbtk.tcl (create_copyright_window): Increase timeout from
- 15 seconds to 30 seconds.
-end-sanitize-gdbtk
-
-start-sanitize-d10v
-Fri Sep 27 13:32:53 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/d10v/tm-d10v.h (TARGET_{INT,PTR}_BIT): Define.
- (TARGET_{,LONG_}DOUBLE_BIT): Ditto.
-
-end-sanitize-d10v
-Thu Sep 26 23:10:26 1996 Mark Alexander <marka@cygnus.com>
-
- * configure.in, config/i386/tm-linux.h: Fix configure
- problem on older Linux systems that prevented core files
- from being recognized.
-
-Wed Sep 25 18:31:33 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * dbug-rom.c: New file, support for Motorola's dBUG monitor.
- * config/m68k/monitor.mt (TDEPFILES): Add it.
- * NEWS: Mention it.
-
-start-sanitize-d10v
-Mon Sep 23 16:13:50 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * config/d10v/tm-d10v.h (SAVED_PC_AFTER_CALL): Fixed.
- Now single-steps correctly.
- * d10v-tdep.c (d10v_pop_frame): Fixed.
-
-end-sanitize-d10v
-Fri Sep 20 16:10:58 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/sh/tm-sh.h (REGISTER_NAMES): Move fp registers to
- be consistent with GCC.
- (FPUL_REGNUM, etc): Renumber to match list changes.
- (ADDR_BITS_REMOVE): Delete.
- * sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names):
- Rearrange to match REGISTER_NAMES.
- * sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
-
-start-sanitize-d10v
-Thu Sep 19 16:19:01 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-tdep.c: Stack chain should work now.
-
-Tue Sep 17 18:46:57 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-tdep.c, config/d10v/tm-d10v.h: Snapshot.
-
-end-sanitize-d10v
-Tue Sep 17 12:20:50 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Add cases for MIPS 5000 like MIPS 4300.
- * configure: Rebuild.
-
-Tue Sep 17 12:09:00 1996 Dawn Perchik <dawn@critters.cygnus.com>
-
- * ser-e7kpc.c: Added wingdb support for target e7000pc.
-
-Tue Sep 17 10:56:52 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * remote-mips.c (pmon_wait): DDB PMON does not require forced
- re-entry back into debug mode.
-
-Mon Sep 16 14:32:58 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * remote-mips.c (mips_load): Ensure that the PC is explicitly
- loaded after a load to a DDB PMON system.
-
-Fri Sep 13 12:02:39 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (INTERNAL_LDFLAGS): Add @HLDFLAGS@ to list.
- (HLDENV): Set to @HLDENV@.
- (gdb): Prefix link command line with $(HLDENV).
- * configure.in: Add support to test for --enable-shared and
- generate appropriate values for HLDFLAGS and HLDENV.
- * configure: Regenerated with autoconf.
-
-Sun Sep 8 15:26:27 1996 Fred Fish <fnf@cygnus.com>
-
- * alpha-nat.c (fetch_core_registers): Match Sep 4 gdbcore.h prototype
- change for core_read_registers in struct core_fns.
- * core-regset.c (fetch_core_registers): Ditto & add prototype.
- * core-sol2.c (fetch_core_registers): Ditto & add prototype.
- * i386aix-nat.c (fetch_core_registers): Ditto & add prototype.
- * i386b-nat.c (fetch_core_registers): Ditto.
- * i386mach-nat.c (fetch_core_registers): Ditto & add prototype.
- * irix4-nat.c (fetch_core_registers): Ditto.
- * irix5-nat.c (fetch_core_registers): Ditto.
- * lynx-nat.c (fetch_core_registers): Ditto & add prototype.
- * m68knbsd-nat.c (fetch_core_registers): Ditto.
- * mips-nat.c (fetch_core_registers): Ditto & add prototype.
- * rs6000-nat.c (fetch_core_registers): Ditto.
- * sparc-nat.c (fetch_core_registers): Ditto.
- * sun3-nat.c (fetch_core_registers): Ditto & add prototype.
- * ultra3-nat.c (fetch_core_registers): Ditto & add prototype.
-
- * alpha-nat.c (register_addr): Match Sep 4 gdbcore.h prototype change.
- * delta68-nat.c (register_addr): Ditto.
- * gdbserver/low-linux.c (register_addr): Ditto.
- * gdbserver/low-hppabsd.c (register_addr): Ditto.
- * i386m3-nat.c (register_addr): Ditto.
- * mips-nat.c (register_addr): Ditto.
- * ultra3-nat.c (register_addr): Ditto.
-
-Sun Sep 8 15:14:00 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * blockframe.c (inside_main_func): Cleanup slightly. Move
- mainsym def into the block it's used in.
- * configure.in configure: Allow NATDEPFILES to be recognized in
- .mh files regardless of whitespace.
-
- * cpu32bug-rom.c (cpu32bug_cmds): Change load_response string to
- keep downloads from hanging.
-
- * remote-wiggler.c: Add support for flash upgrades.
- * (wiggler_error): Fix message format. Add new error code.
- * (wiggler_write_byets): Error code is hex. Report errors with
- proper routine name.
- * (wiggler_read_byets): Report errors with proper routine name.
- * (get_packet): Add support for new flash commands.
- * (wiggler_load): Call clear_symtab_users() to reset things
- properly after download.
- * (flash_xfer_memory bdm_update_flash_command): New funxtions to
- support flash upgrades for Wiggler.
- * (_initialize_remote_wiggler): Add `bdm update-flash' command.
-
-Fri Sep 6 13:14:13 1996 Geoffrey Noer <noer@cygnus.com>
-
- * ser-tcp.c: don't include netinet/tcp.h if __CYGWIN32__
-
-Thu Sep 5 17:05:13 1996 Geoffrey Noer <noer@cygnus.com>
-
- * config/i386/cygwin32.mh:
- * config/powerpc/cygwin32.mh: build ser-tcp.o for both hosts
-
-Thu Sep 5 12:09:13 1996 Per Bothner <bothner@deneb.cygnus.com>
-
- * value.h (COERCE_REF): Fix previous change.
- (COERCE_ENUM): Add a check_typedef (this is the real fix).
-
-Thu Sep 5 03:28:30 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * eval.c (evaluate_subexp_standard): In case of OP_ARRAY: make a
- better check of array boundaries.
-
-Thu Sep 5 01:29:42 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * configure: Update aclocal.m4 and re-run autoconf to get correct
- defs for BFD stuff.
- * remote-wiggler.c (wiggler_error): Error codes are hex. Also,
- fix default message generation.
-
-Wed Sep 4 17:28:40 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in: Add mswin to SUBDIRS. Add rules for
- mswin/libwingdb.a and remote-wiggler.o.
- * breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
- * (breakpoint_inserted_here_p): New func, just like
- breakpoint_here_p, except it's honest. Honestly.
- * breakpoint.h: Proto for above.
-start-sanitize-gdbtk
- * configure configure.in: Add host *windows* to list of hosts
- that don't support GDBtk.
-end-sanitize-gdbtk
- * configure configure.in: Add mswin to configdirs if host is
- i[3456]86-*-windows.
- * core-aout.c (fetch_core_registers register_addr) gdbcore.h:
- Change all vars that can contain addresses to type CORE_ADDR.
- * findvar.c (supply_register): Allow val to be NULL. This means
- that regno is unsupported.
- * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
- just call pid forms with inferior_pid so that there's only once
- place to hack PC's and such.
- * infrun.c (proceed): Don't skip breakpoints if user changed PC.
- * remote-wiggler.c: New file. Support for BDM interface from
- Macraigor Systems.
- * serial.c: Enhance serial logging capability. Add hex and octal
- output modes (set remotelogbase {hex|octal|ascii}. Also log
- breaks, timeouts, errors, and eofs.
- * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
- function so that we can log breaks. Don't export serial_logfile
- or serial_logfp.
- * top.c (execute_command): Don't test for serial_logfp here.
- Just call serial_log_comand, and let serial.c sort it out.
- * valops.c (value_of_variable): Don't attempt to establish frames
- for static and global variables. This makes things work a bit
- better if the stack or frame pointer is trashed.
- * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
- * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
- misaligned stacks during function calls.
-
-Wed Sep 4 13:06:26 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * terminal.h: Don't use #elif.
-
-Wed Sep 4 06:49:35 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-exp.c (parse_tuple_element): Allow (*): for array tuples
- if we have a type.
-
- * eval.c (evaluate_subexp_standard): In case of OP_ARRAY:
- check number of args against bounds of array to avoid
- memory corruption.
-
- * value.h (COERCE_REF): Do a CHECK_TYPEDEF in case we get
- a TYPE_CODE_TYPEDEF.
-
-Fri Aug 30 15:07:14 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * remote-mips.c: Provide support for DDBVR4300 target board.
- (ddb_open, ddb_ops): Added.
- (mips_monitor_type): MON_DDB Added.
- (mips_enter_debug, mips_exit_debug, mips_initialize,
- mips_fetch_registers, common_breakpoint, mips_load,
- _initialize_remote_mips): Updated.
-
-Thu Aug 29 17:00:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * nlm/configure.in (i[345]86-*-*): Recognize i686 for pentium pro.
- * nlm/configure: Regenerate.
-
- * gdbserver/configure.in (i[345]86-*-*): Recognize i686 for
- pentium pro.
-
-Wed Aug 28 13:11:15 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: If CY_AC_PATH_TCLCONFIG can't find TCL, don't run
- CY_AC_LOAD_TCLCONFIG.
- * configure: Rebuild.
-
-Tue Aug 27 12:40:40 1996 Fred Fish <fnf@cygnus.com>
-
- * infrun.c (wait_for_inferior): Initialize stop_func_end before calling
- find_pc_partial_function.
-
-Tue Aug 27 10:17:34 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure: Regenerate again.
-
-Tue Aug 27 04:25:08 1996 Geoffrey Noer <noer@cygnus.com>
-
- * configure.in: work around host_alias configure bug.
- AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL
- and second by AC_CANONICAL_SYSTEM). The second clobbers the
- previous setting. Circumventing by moving the second check
- to before the first.
- * configure: regenerated
-
-start-sanitize-d10v
-Mon Aug 26 18:36:54 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * config/d10v/d10v.mt: New file.
- * config/d10v/tm-d10v.h: New file.
- * configure.in: New target D10V.
- * d10v-tdep.c: New file.
-
-end-sanitize-d10v
-Sun Aug 25 00:09:47 1996 Fred Fish <fnf@rtl.cygnus.com>
-
- * rs6000-tdep.c: Fix typo in comment.
- * valops.c (call_function_by_hand): Set using_gcc to 2
- for code compiled without -g, per comment in code.
- * config/a29k/tm-a29k.h (STACK_ALIGN): Add comment.
- * config/sparc/tm-sparc.h (STACK_ALIGN): Add comment.
- * config/sparc/tm-sp64.h (STACK_ALIGN): Add comment.
- * config/pyr/tm-pyr.h (STACK_ALIGN): Add comment.
- * config/m88k/tm-m88k.h (STACK_ALIGN): Add comment.
- * config/pa/tm-hppa.h (PUSH_ARGUMENTS): Enclose args in ()'s.
- (STACK_ALIGN): Add comment, move to be with other associated
- macros, and document.
- * config/mips/tm-mips.h (PUSH_ARGUMENTS): Enclose args in ()'s.
- (STACK_ALIGN): Remove completely, handled by PUSH_ARGUMENTS.
- * config/alpha/tm-alpha.h (PUSH_ARGUMENTS): Enclose args in ()'s.
- * config/rs6000/tm-rs6000.h (STACK_ALIGN): Remove completely,
- handled by PUSH_ARGUMENTS.
- (PUSH_ARGUMENTS): Enclose args in ()'s.
-
-Fri Aug 23 13:55:05 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * infrun.c (wait_for_inferior): Try to reenable shared library
- breakpoints even if auto_solib_load is not set.
-
-Fri Aug 23 00:44:57 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.c (gdbtk_init): Check for a DISPLAY env variable and
- gracefully degrade to using command line interface if none is
- found.
-
-Wed Aug 21 16:31:27 1996 Fred Fish <fnf@cygnus.com>
-
- * valprint.c (print_longest): Test for CC_HAS_LONG_LONG as well as
- PRINTF_HAS_LONG_LONG.
- * expprint.c (dump_expression): Ditto.
- * configure.in: Fix check for long long support in compiler to
- use a function body, not a nested function.
- * configure: Rebuild with autoconf.
-
-Tue Aug 20 17:59:42 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * aclocal.m4: Include ../bfd/aclocal.m4.
- * configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call
- BFD_NEED_DECLARATION on malloc, realloc, and free.
- * acconfig.h: Add NEED_DECLARATION_MALLOC,
- NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
- * configure, config.in: Rebuild.
- * defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
- rather than __STDC__. Only declare malloc, realloc, and free if
- NEED_DECLARATION_* is defined.
-
-Tue Aug 20 15:37:03 1996 Fred Fish <fnf@cygnus.com>
-
- * solib.c (_initialize_solib): Add missing '\' chars at ends of
- strings that continue on next line.
- (enable_break): Replace "return 0" with setting success to zero
- and letting normal return handle the return.
-
-Sat Aug 17 14:16:23 1996 Fred Fish <fnf@cygnus.com>
-
- * mips-tdep.c (mips_push_arguments): Make sure sp and struct_addr
- are properly aligned.
-
-Fri Aug 16 17:54:26 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * rs6000-tdep.c (rs6000_fix_call_dummy): Add full set of arguments.
- * config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Pass all arguments
- to function, declare function correctly.
-
-Fri Aug 16 17:24:35 1996 Dawn Perchik <dawn@critters.cygnus.com>
-
- * symtab.h: changed namespace to _namespace for compiling under
- MFC v4.0.
-
-Fri Aug 16 13:52:21 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Update for various recent changes, add some
- comments.
-start-sanitize-gm
- * mpw-config.in: Fix name of Magic Cap-specific file.
-end-sanitize-gm
-
-Fri Aug 16 15:47:36 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Cast args to be an
- integer for type correctness.
-
-Fri Aug 16 15:15:37 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * config/mips/{vr4300.mt, vr4300el.mt} (SIM): Add -lm when
- simulator is included.
-
-Thu Aug 15 13:44:13 1996 Fred Fish <fnf@cygnus.com>
-
- * findvar.c (write_register_pid): Only needed when TARGET_WRITE_PC
- is not defined.
- (read_register_pid): Only needed when TARGET_READ_PC is not
- defined.
- * hppa-tdep.c (frame_saved_pc): Remove prototype.
- * infptrace.c (udot_info): Prototype when CHILD_XFER_MEMORY is
- not defined.
- * config/xm-aix4.h (aix_resizewindow): Convert old style decl
- to prototype.
- * xcoffsolib.c (command.h): Include for needed prototypes.
-
-Wed Aug 14 17:54:19 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * config/i386/cygwin32.mh: Set NAT_FILE to nm-empty.h to make
- native work.
-
-Wed Aug 14 02:03:42 1996 Fred Fish <fnf@cygnus.com>
-
- From Blair MacIntyre <bm@cs.columbia.edu>:
- * hppa-tdep.c (hppa_fix_call_dummy): Use MSYMBOL_TYPE rather
- than SYMBOL_TYPE on msymbols.
- * somsolib.c (som_solib_create_inferior_hook): Ditto.
-
- * Makefile.in (init.c): Generate with prototypes.
-
- * config/pa/tm-hppa.h (frame_saved_pc): Add prototype.
- * config/rs6000/xm-rs6000.h (aix_resizewindow): Ditto.
- * config/rs6000/tm-rs6000.h (frame_initial_stack_address): Ditto.
- (pc_load_segment_name): Ditto.
- (pop_frame): Ditto.
- (extract_return_value): Ditto.
- (is_magic_function_pointer): Ditto.
- (push_dummy_frame): Ditto.
- (fix_call_dummy): Ditto.
- (push_arguments): Ditto.
- (skip_trampoline_code): Ditto.
- (aix_process_linenos): Ditto.
-
- * config/m68k/tm-cisco.h (get_longjmp_target): Add prototype.
- * config/m68k/tm-es1800.h: Ditto.
- * config/m68k/tm-vx68.h: Ditto.
- * config/m68k/tm-sun3.h: Ditto.
- * config/m68k/tm-m68kv4.h: Ditto.
-
-Tue Aug 13 23:04:36 1996 Fred Fish <fnf@cygnus.com>
-
- * config/mips/nm-mips.h (get_longjmp_target): Add prototype.
- * config/mips/nm-irix3.h (get_longjmp_target): Add prototype.
- * remote-mips.c (mips_read_processor_type): Remove prototype.
- * mips-tdep.c (gdb_print_insn_mips): Add prototype and make static.
- * irix5-nat.c (fetch_core_registers): Add prototype.
-
-Mon Aug 12 21:23:44 1996 Fred Fish <fnf@cygnus.com>
-
- * remote-pa.c (boot_board): Add dummy params to make type compatible
- for passing to add_com.
- * scm-exp.c (scm_lreadr): Ensure svalue is not used uninitialized.
- * buildsym.c (compare_line_numbers): Change function to match
- prototype and also what qsort expects.
-
-Mon Aug 12 19:19:00 1996 Mark Alexander <marka@cygnus.com>
-
- * remote.c: Make remote_write_size public.
- * sh-tdep.c (_initialize_sh_tdep): Set remote_write_size to 300
- to prevent packet errors with some versions of CMON.
-
-Mon Aug 12 16:20:58 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * defs.h: Define CONST_PTR as blank if compiling with Microsoft
- C, else it's `const'.
- * c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
- scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR
- macro instead.
- * configure configure.in defs.h: Use AC_C_CONST to figure out if
- the compiler supports const. Gets rid of some cruft in defs.h.
- * dwarf2read.c: <string.h> -> "gdb_string.h"
- * remote-sim.c: Add prototypes. Fix call to gdbsim_kill.
- * sparcl-tdep.c (download): Add prototypes to write_routine and
- start_routine args.
-
- * mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get
- rid of varargs.h Include string.h.
- * (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
- update): Fix prototypes, fix calls.
- * (update): Return value for catch_errors.
- * (run_execute_command togdb_command_from_tty togdb_command):
- Cleanup catching of errors from calls to execute_command. Also,
- dup command string to avoid modifying const strings.
- * (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead
- of NULL when see if b->address isn't set.
- * (bi_disable_bpt bi_enable_bpt bi_delete_all
- bi_delete_breakpoint): Add arg to calls to update.
- * (gui_command): Add prototype.
- * (mswin_query): Fix prototype.
- * (_initialize_gdbwin): Dup string to avoid modifying const.
- * (info_path togdb_get_info_path): Remove const from decls cuz
- this can't be const (it points at malloc'ed memory).
- * (togdb_searchpath): Remove const from path. Dup string to
- avoid modifying const strings.
- * rindex -> strrchr.
- * (gdbwin_list_symbols): Regexp param is const.
- * Fix lots of refs to psymtabs to deref correct pointers.
- * (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal,
- not &sal.
- * mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
- toget_set_info_path): Fix prototypes to match reality.
- * mswin/gui.cpp: Define _beginthreadex and _endthreadex routines
- with proper prototypes.
- * mswin/iface.cpp (gdbwin_fputs): Define with correct number of args.
- * mswin/ser-win32s.c: Fix defs of min and max.
- * mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be
- USHORT.
- * (WriteComm16): Change lpBug from LPVOID to LPCSTR.
- * mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16.
-
-Sun Aug 11 20:54:16 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * main.c (main): Make sure command loop is used with cygwin32.
- * terminal.h: Allow cygwin32 to use termios.h.
-
-start-sanitize-gdbtk
-Fri Aug 9 12:32:53 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * Makefile.in (LIB_INSTALL_DIR): New macro.
- (TCL): Include @TCL_LD_SEARCH_FLAGS@.
-
-end-sanitize-gdbtk
-Fri Aug 9 12:42:49 1996 Jeffrey A Law (law@cygnus.com)
-
- * somread.c (som_symtab_read): Handle secondary definition
- symbols (aka weak symbols).
-
- * config/tm-hppa.h (EXTRACT_RETURN_VALUE): Fix thinko in
- last change.
-
-Thu Aug 8 10:12:36 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * symfile.c (symfile_bfd_open): Change ifdef from __WIN32__ to
- _WIN32.
-
- * somread.c: Rearrange order of includes to fix warnings under
- hpux-10.10. Also don't include sys/file.h.
-
-Wed Aug 7 21:45:52 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * dbxread.c: Don't include param.h or sys/file.h.
- * (dbx_symfile_read): Determine symfile_relocatable from bfd
- flags instead of file extension. Also clean up a little bit.
-
-Wed Aug 7 17:18:37 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * dwarf2read.c dwarfread.c exec.c infcmd.c infrun.c main.c
- mdebugread.c os9kread.c source.c top.c utils.c: Don't
- include param.h or sys/file.h (or unistd.h in some cases).
- * defs.h exec.c inflow.c remote-array.c remote-e7000.c
- sparcl-tdep.c terminal.h utils.c: Replace all occurances of
- __WIN32__, WINGDB, WIN32, etc... with _WIN32.
- * main.c: Remove #ifndef WINGDB around option processing. Fix
- bug with passing argc==0 and argv==NULL to getopt.
- * (main) Remove calls to access() before source_command. Let
- soure_command handle access errors.
- * maint.c (maintenance_dump_me): #ifdef out for _WIN32.
- * symtab.c (operator_chars): Make this global for wingdb.
- * top.c (disconnect): #ifdef out for _WIN32.
- * (source_command): If got an error and from_tty, then call print
- error, else just return quietly.
- * utils.c (fatal_dump_core): Can't kill ourselves under windows.
- Just exit.
- * (pollquit notice_quit): #ifdef out stuff that doesn't exist
- under windows.
-
-Wed Aug 7 09:59:19 1996 Jeffrey A Law (law@cygnus.com)
-
- * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Tweak for
- structures > 4 bytes in size.
-
- * valops.c (call_function_by_hand): Handle aligning stacks that
- grow up correctly.
- * config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define.
- (STACK_ALIGN): Define.
- * hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte
- alignment on structs/unions.
-
-Sun Aug 4 16:22:42 1996 Fred Fish <fnf@cygnus.com>
-
- * config/powerpc/nm-aix.h (PTRACE_ARG3_TYPE): Define to "int *",
- which is the documented type under at least AIX 3 and AIX 4.
-
-Sat Aug 3 04:02:46 1996 Fred Fish <fnf@cygnus.com>
-
- * config/alpha/alpha-osf3.mh (XM_FILE): Change from xm-alpha.h to
- xm-alphaosf.h.
- (MMALLOC_CFLAGS): Define NO_MMCHECK to not install consistency
- checks.
-
-start-sanitize-gdbtk
-Thu Aug 1 20:35:01 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.c (mainWindow): Deleted.
- (cleanup_init): Don't destroy main window.
- (gdbtk_init): Main window now created by Tk_Init.
-
- * configure.in: Most X checks now handled automatically by Tk.
- Use new macros to find Tcl/Tk.
- * aclocal.m4: New version for new Tcl/Tk; from Don Libes.
- * config.in, configure: Regenerated.
-
- * Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
- X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
-
-end-sanitize-gdbtk
-Thu Aug 1 10:11:34 1996 Fred Fish <fnf@cygnus.com>
-
- * config/mips/tm-mips.h (TM_MIPS_H): Enclose file contents in
- this, define when contents are included.
- (mips_read_processor_type): Add prototype.
- * config/mips/xm-mips.h: Remove strdup decl, now in gdb_string.h
- * mdebugread.c (ecoff_relocate_efi): Add prototype.
- (fixup_sigtramp): Only needed when TM_MIPS_H is defined.
-
-start-sanitize-gdbtk
-Thu Aug 1 16:12:05 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
-
- * Makefile.in (gdbtk.tcl): put in $(datadir), not $(libdir).
-
-end-sanitize-gdbtk
-Wed Jul 31 20:21:24 1996 Fred Fish <fnf@cygnus.com>
-
- * rs6000-nat.c (add_vmap): Return 0 to caller rather than random value.
- (vmap_ldinfo): Ensure got_exec_file is not used uninitialized.
- (fetch_core_registers): Add prototype.
- (vmap_symtab): Ditto.
- (objfile_symbol_add): Ditto.
- (add_vmap): Ditto.
- (vmap_ldinfo): Ditto.
- (vmap_exec): Ditto.
-
-Tue Jul 30 17:57:46 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * stabsread.c (get_substring): Declare second arg as int.
-
- * remote-es.c: Include gdb_string.h after defs.h.
-
-Mon Jul 29 21:13:20 1996 Fred Fish <fnf@cygnus.com>
-
- * rs6000-tdep.c (push_arguments): Remove unused variable "pc".
- (branch_dest): Remove unused variable "offset".
- (pop_dummy_frame): Add prototype and make static.
- (push_arguments): Guard against using len uninitialized.
- (push_arguments): Guard against using arg uninitialized.
- (frame_saved_pc): Remove unused variable "frameless".
- (free_loadinfo): Ifdef out unused function.
-
- * xcoffread.c (compare_lte): Change prototype and function to
- be correct type for passing to qsort.
- (add_stab_to_list): Ifdef out unused function and prototype.
- (compare_lte): Add prototype
- (arrange_linetable): Ditto.
- (record_include_begin): Ditto.
- (record_include_end): Ditto.
- (process_linenos): Ditto.
- (xcoff_next_symbol_text): Ditto.
- (scan_xcoff_symtab): Ditto.
- (xcoff_initial_scan): Ditto.
-
- * mips-tdep.c (mips_read_processor_type): Add parens around
- bitwise-and operands in comparison; previous expression always
- evaluated to 0 because of equality comparison of two constants.
-
- * rs6000-tdep.c (skip_prologue): Add missing parens around
- operands of logical-or so that first operand does not bind
- to previous logical-and.
-
- * configure.in: Expand "long long" test to include code that triggers
- known problem on HPUX with native compiler.
- (configure): Regenerated.
-
-Mon Jul 29 18:12:27 1996 Jeffrey A Law (law@cygnus.com)
-
- * somsolib.c (som_solib_create_inferior_hook): Don't
- warn if __d_pid can't be found.
-
-Sun Jul 28 10:46:39 1996 Fred Fish <fnf@cygnus.com>
-
- * config/mips/tm-mips.h (struct frame_info): Forward decl.
- (struct type): Ditto.
- (struct value): Ditto.
-
- * config/mips/tm-mips.h (sigtramp_address): Move extern decl
- from mips-tdep.c to here.
- (sigtramp_end): Ditto.
- (fixup_sigtramp): Ditto.
-
- * config/mips/tm-mips.h (init_extra_frame_info): Add prototype.
- (mips_frame_chain): Ditto.
- (mips_step_skips_delay): Ditto.
- (mips_frame_saved_pc): Ditto.
- (mips_find_saved_regs): Ditto.
- (mips_frame_num_args): Ditto.
- (mips_pop_frame): Ditto.
- (mips_extract_return_value): Ditto.
- (mips_store_return_value): Ditto.
- (mips_push_dummy_frame): Ditto.
- (mips_push_arguments): Ditto.
- (mips_do_registers_info): Ditto.
- (ecoff_relocate_efi): Ditto.
- (ecoff_relocate_efi): Ditto.
- * irix4-nat.c (fetch_core_registers): Add prototype.
- * mips-tdep.c (read_next_frame_reg): Add prototype
- (heuristic_proc_start): Ditto.
- (heuristic_proc_desc): Ditto.
- (mips_print_register): Ditto.
- * config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype.
- (procfs_stopped_by_watchpoint): Ditto.
- * config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype.
- (procfs_stopped_by_watchpoint): Ditto.
- * config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype.
- (struct symbol): Add forward decl for prototype.
-
- * breakpoint.c (internal_breakpoint_number): Only needed if
- GET_LONGJMP_TARGET or SOLIB_ADD is defined.
-
- * objfiles.c (ecoff_relocate_efi): Remove prototype.
-
-Sat Jul 27 17:47:35 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in: Add test for "long long" support.
- * configure: Regenerate with autoconf.
- * acconfig.h: Add CC_HAS_LONG_LONG
- * config.in: Regenerate with autoheader.
- * config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove
- * config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove.
- * config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove.
- * config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove.
- * config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove
- (PRINTF_HAS_LONG_LONG): Remove.
- (FORCE_LONG_LONG): Remove.
- * config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version.
- * config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove
- (PRINTF_HAS_LONG_LONG): Remove.
- * config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove.
- (PRINTF_HAS_LONG_LONG): Remove.
- * config/pa/tm-hppa.h (GET_FIELD): Put parens around
- subtraction inside shift. Put parens around subtraction
- in operand of bitwise and.
- (struct frame_info): Forward declare
- if __STDC__ defined.
- (frame_saved_regs): Ditto.
- (struct value): Ditto.
- (struct type): Ditto.
- (struct inferior_status): Ditto.
- (init_extra_frame_info): Add prototype.
- (skip_prologue): Ditto.
- (frameless_function_invocation): Ditto.
- (frame_chain): Ditto.
- (frame_chain_valid): Ditto.
- (saved_pc_after_call): Ditto.
- (hppa_fix_call_dummy): Ditto.
- (hppa_push_arguments): Ditto.
- (pa_do_registers_info): Ditto.
- (in_solib_call_trampoline): Ditto.
- (in_solib_return_trampoline): Ditto.
- (push_dummy_frame): Ditto.
- * convex-tdep.c (decout): Use print_longest rather than
- fprintf_filtered.
- * defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set
- CC_HAS_LONG_LONG.
- (INT_MIN): Fix so it works correctly when assigned to a long long.
- * valprint.c (longest_to_int): Rewrite to remove dependence
- on INT_MIN and INT_MAX.
- (print_longest): Rewrite the code that falls back to synthesized
- hex output when LONGEST value is not representable as in a long and
- printf doesn't support printing long longs.
- * ch-valprint.c (chill_val_print): Cast 2nd arg of
- chill_print_type_scalar to LONGEST.
- chill_print_type_scalar): Make static and add prototype.
- * hppa-tdep.c (get_field): Ifdef out unused function.
- (set_field): Ditto.
- (extract_3): Ditto.
- (extract_5_store): Ditto.
- (extract_11): Ditto.
- (extract_12): Ditto.
- (deposit_17): Ditto.
- (extract_14): Convert to static and add prototype.
- (deposit_14): Ditto.
- (extract_21): Ditto.
- (deposit_21): Ditto.
- (extract_17): Ditto.
- (extract_5r_store): Ditto.
- (extract_5R_store): Ditto.
- (extract_5_load): Ditto.
- (find_proc_framesize): Ditto.
- (find_dummy_frame_regs): Ditto.
- (sign_extend): Ditto.
- (find_unwind_entry): Add prototype.
- (find_return_regnum): Ditto.
- (unwind_command): Ditto.
- (find_dummy_frame_regs): Add parens around subtraction in operand
- of bitwise-and.
- (skip_prologue): Add parens around operands of logical-and inside
- operand of logical-or.
- (sign_extend): Add parens around operands of subtraction inside
- operand of shift.
- (low_sign_extend): Ditto.
- * top.c (filename_completer): Convert old style decl of
- filename_completion_function into prototype.
- * f-lang.c (patch_common_entries): Ifdef out unused function.
- * stabsread.c (read_cfront_baseclasses): Remove unused local
- variable "msg_noterm".
- (resolve_cfront_continuation): Remove unused local variable "fip".
- (read_type): Remove unused variable xtypenums.
- (read_cfront_static_fields): Remove unused variable "i".
- (read_cfront_static_fields): Remove unused variable "nfields".
- (read_cfront_member_functions): Add missing comment terminator.
- (read_cfront_static_fields): Return 1 rather than random value.
- (read_cfront_baseclasses): Ditto.
- (read_cfront_baseclasses): Ditto.
- (read_cfront_baseclasses): Ditto.
- * somsolib.c (som_solib_create_inferior_hook): Remove unused
- variable "u".
- (som_solib_create_inferior_hook): Remove unused variable
- shadow_contents.
- (language.h): Add for needed prototypes.
- (som_solib_sharedlibrary_command): Add prototype.
- * hpread.c: (hpread_read_array_type): Add prototype.
- * somread.c (hpread_build_pysmtabs): Add prototype.
- (hpread_symfile_finish): Ditto.
- (hpread_symfile_init): Ditto.
- * hppah-nat.c (fetch_register): Convert old style decl
- to prototype.
- (gdbcore.h): Include for needed prototypes.
- (fetch_register): Remove unused variable "mess".
- * remote-pa.c (get_offsets): Ifdef out unused function.
- (remote_start_remote): Remove unused variable "timeout".
- (boot_board): Add prototype.
- (reaad_frame): Add prototype.
- (getpkt): Remove unused variable "bp".
- (remote_kill): Add prototype.
- (remote_mourn): Add prototype.
- (remote_insert_breakpoint): Add prototype.
- (remote_remove_breakpoint): Add prototype.
- * valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined.
- * infcmd.c (do_registers_info): Only need prototype if
- DO_REGISTERS_INFO is not defined.
- (breakpoint_auto_delete_contents): Only need if
- CALL_DUMMY_BREAKPOINT_OFFSET is defined.
-
-Sat Jul 27 08:49:49 1996 Fred Fish <fnf@cygnus.com>
-
- * xcoffread.c (xcoff_end_psymtab): Add textlow_not_set parameter.
- (END_PSYMTAB): Ditto.
- (scan_xcoff_symtab): Call xcoff_end_psymtab with textlow_not_set.
-
-Fri Jul 26 14:07:37 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * printcmd.c (_initialize_printcmd): Initialize
- tm_print_insn_info.flavour.
-start-sanitize-gdbtk
- * gdbtk.c (gdb_disassemble): Initialize di.flavour.
-end-sanitize-gdbtk
-
-Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (scm-valprint.o): Depends upon gdbcore_h.
- (arm-tdep.o): Ditto.
- (dcache.o): Ditto.
- (i386ly-tdep.o): Ditto.
- (i960-tdep.o): Ditto.
- (m68k-tdep.o): Ditto.
- (nindy-tdep.o): Ditto.
- (scm-lang.o): Ditto.
- (w65-tdep.o): Ditto.
- (z8k-tdep.o): Ditto.
- (m68k-tdep.o): Depends upon value_h and gdb_string.h
- (m2-valprint.o): Depends upon m2-lang.h.
- (sparc-tdep.o): Depends upon gdb_string.h
- (valprint.o): Depends upon valprint.h
-
- * remote-e7000.c (notice_quit): Remove prototype.
- * top.c (initialize_targets): Remove prototype, now in target.h.
- * stabsread.c (resolve_cfront_continuation): Remove prototype.
- * dbxread.c (resolve_cfront_continuation): Remove prototype.
- * symfile.h (set_demangling_style): Remove prototype.
- * config/tm-sysv4.h (in_plt_section): Remove prototype, in objfiles.h.
- * config/sparc/tm-sparc.h (single_step): Remove extern decl, now in
- target.h.
- * config/arc/tm-arc.h (one_stepped, single_step): Remove extern decls,
- now in target.h.
- * ser-unix.c (hardwire_restore): Remove obsolete prototype.
- * sparc-tdep.c (single_step): Remove forward decl of isbranch.
- * scm-lang.c (find_function_in_inferior): Remove prototype.
- (value_allocate_space_in_inferior): Ditto.
- * infrun.c (write_pc_pid): Remove prototype, now in inferior.h.
- * defs.h (strchr): Remove declarations, they are declared in
- gdb_string.h also.
- (strrchr): Ditto.
- (strstr): Ditto.
- (strtok): Ditto.
- (strerror): Ditto.
- * f-valprint.c (f77_print_array_1): Remove extra arg that was being
- passed to f77_print_array_1.
- * gdbtypes.c (add_name): Remove unused variables lenstrlen and lenstr.
- * scm-exp.c (scm_istr2int): Remove unused variable "j".
- (scm_parse): Remove unused variable "str".
- * hp300ux-nat.c (store_inferior_register): Remove unused variable
- "buf".
- (store_inferior_registers): Remove unnecessary decl "registers".
- * m68k-tdep.c (m68k_pop_frame): Remove unused variable "fi".
- * scm-lang.c (scm_get_field): Remove unused variable "val".
- (scm_lookup_name): Remove unused variable "symval".
- * objfiles.c (map_to_file): Remove unused local variable "tempfd".
- * procfs.c (do_attach, do_detach): Remove unused variable "result".
- (last_resume_pid): Remove unused static variable.
- * alpha-tdep.c (alpha_linux_sigtramp_offset): Remove unused variable
- "res".
- * objfiles.c (map_to_address): Remove unused function.
- * f-valprint.c (print_max): Remove extraneous extern decl,
- in valprint.h.
- (calc_f77_array_dims): Remove extraneous prototype, in f-lang.h.
- * ch-exp.c (write_lower_upper_value): Remove prototype for
- type_lower_upper.
-
- * gdbtypes.c (cfront_mangle_name): #ifdef out unused function.
- * ch-exp.c (parse_mode_call): Ditto.
- * f-valprint.c (there_is_a_visible_common_named): Ditto.
- * f-lang.c (clear_function_list): Ditto.
- (get_bf_for_fcn): Ditto.
- (clear_bf_list): Ditto.
- (add_common_block): Ditto.
- (patch_all_commons_by_name): Ditto.
- (find_first_common_named): Ditto.
- (add_common_entry): Ditto.
- (allocate_saved_function_node): Ditto.
- (allocate_saved_bf_node): Ditto.
- (allocate_common_entry_node): Ditto.
- (allocate_saved_f77_common_node): Ditto.
-
- * arm-tdep.c (gdbcore.h): Include for necessary prototypes.
- * dcache.c (gdbcore.h): Ditto.
- * i386ly-tdep.c (gdbcore.h): Ditto.
- * i960-tdep.c (gdbcore.h): Ditto.
- * m2-valprint.c (m2-lang.h): Ditto.
- * m68k-tdep.c (gdbcore.h): Ditto.
- (value.h): Ditto.
- (gdb_string.h): Ditto.
- * nindy-tdep.c (gdbcore.h): Ditto.
- * scm-lang.c (gdbcore.h): Ditto.
- * scm-valprint.c (gdbcore.h): Ditto.
- * w65-tdep.c (gdbcore.h): Ditto.
- * z8k-tdep.c (gdbcore.h): Ditto.
- * sparc-tdep.c (gdb_string.h): Include.
- * valprint.c (valprint.h): Include.
-
- * config/xm-lynx.h: Remove part of comment about INT_MIN
- redefined warnings from defs.h, since INT_MIN define in
- defs.h is now protected by #ifndef INT_MIN.
- * config/i386/xm-i386bsd.h: Ditto.
- * config/m68k/xm-hp300bsd.h: Ditto.
- * config/m68k/xm-news.h: Ditto.
-
- * config/pa/xm-hppah.h (INT_MIN): Remove bogus INT_MIN
- definition as 0x80000000. The macro in defs.h is better.
- * config/i386/xm-i386m3.h (INT_MIN): Ditto.
- * config/i386/xm-i386mach.h (INT_MIN): Ditto.
- * config/ns32k/xm-ns32km3.h (INT_MIN): Ditto.
- * config/pa/xm-hppab.h: Ditto.
-
- * core-aout.c (fetch_core_registers): Add prototype.
- * hp300ux-nat.c (fetch_inferior_register): Ditto.
- (store_inferior_register_1): Ditto.
- (store_inferior_register): Ditto.
- * config/m68k/tm-m68k.h (find_saved_regs): Ditto.
- *scm-valprint.c (c_val_print): Ditto.
- * procfs.c (add_fd): Ditto.
- (remove_fd): Ditto.
- (wait_fd): Ditto.
- (sigcodename): Ditto.
- (sigcodedesc): Ditto.
- (procfs_kill_inferior): Ditto.
- (procfs_xfer_memory): Ditto.
- (procfs_store_registers): Ditto.
- (create_procinfo): Ditto.
- (procfs_init_inferior): Ditto.
- (proc_set_exec_trap): Ditto.
- (procfs_attach): Ditto.
- (procfs_detach): Ditto.
- (procfs_prepare_to_store): Ditto.
- (procfs_files_info): Ditto.
- (procfs_open): Ditto.
- (procfs_wait): Ditto.
- (procfs_fetch_registers): Ditto.
- (procfs_mourn_inferior): Ditto.
- (procfs_can_run): Ditto.
- (procfs_thread_alive): Ditto.
- (procfs_stop): Ditto.
- * alpha-nat.c (fetch_core_registers): Ditto.
- * config/alpha/tm-alpha.h (alpha_osf_skip_sigtramp_frame): Ditto.
- * objfiles.c (ecoff_relocate_efi): Ditto.
- * inflow.c (pass_signal): Ditto.
- (handle_sigio): Ditto.
- * annotate.c (breakpoint_changed): Ditto.
- * callback.c (wrap): Ditto.
- (fdbad): Ditto.
- (fdmap): Ditto.
- * utils.c (malloc_botch): Ditto.
- (fputs_maybe_filtered): Ditto.
- (vfprintf_maybe_filtered): Ditto.
- * defs.h (notice_quit): Ditto.
- * defs.h (xmalloc, xrealloc): Ditto.
- * top.c (stop_sig): Ditto.
- (init_signals): Ditto.
- (user_defined_command): Ditto.
- (source_cleanup_lines): Ditto.
- (dont_repeat_command): Ditto.
- (serial_log_command): Ditto.
- (disconnect): Ditto.
- * target.h (initialize_targets): Ditto.
- * os9kread.c (read_minimal_symbols): Ditto.
- * mdebugread.c (mdebug_psymtab_to_symtab): Ditto.
- (fdr_name): Ditto.
- (push_parse_stack): Ditto.
- (pop_parse_stack): Ditto.
- (is_pending_symbol): Ditto.
- (add_pending): Ditto.
- * serial.c (serial_logchar): Ditto.
- (serial_interface_lookup): Ditto.
- * serial.h (serial_log_command): Ditto.
- * f-valprint.c (info_common_command): Ditto.
- * gdbtypes.h (print_type_scalar): Ditto.
- * scm-valprint.c (scm_scmlist_print): Ditto.
- (scm_ipruk): Ditto.
- * scm-lang.c (scm_printstr): Ditto.
- (in_eval_c): Ditto.
- (evaluate_subexp_scm): Ditto.
- * scm-exp.c (scm_read_token): Ditto.
- (scm_skip_ws): Ditto.
- (scm_lreadparen): Ditto.
- * m2-lang.c (emit_char): Ditto.
- (m2_printchar): Ditto.
- (m2_printstr): Ditto.
- (m2_create_fundamental_type): Ditto.
- * f-lang.c (emit_char): Ditto.
- (f_printchar): Ditto.
- (f_printstr): Ditto.
- (f_create_fundamental_type): Ditto.
- * ch-lang.c (chill_printchar): Ditto.
- (chill_printstr): Ditto.
- (chill_create_fundamental_type): Ditto.
- (value_chill_length): Ditto.
- (value_chill_card): Ditto.
- (value_chill_max_min): Ditto.
- (evaluate_subexp_chill): Ditto.
- * ch-exp.c (PEEK_TOKEN): Ditto.
- (peek_token_): Ditto.
- (forward_token_): Ditto.
- (parse_case_label): Ditto.
- (parse_opt_untyped_expr): Ditto.
- (parse_unary_call): Ditto.
- (parse_call): Ditto.
- (parse_named_record_element): Ditto.
- (parse_tuple_element): Ditto.
- (parse_opt_element_list): Ditto.
- (parse_tuple): Ditto.
- (parse_primval): Ditto.
- (parse_operand6): Ditto.
- (parse_operand5): Ditto.
- (parse_operand4): Ditto.
- (parse_operand3): Ditto.
- (parse_operand2): Ditto.
- (parse_operand1): Ditto.
- (parse_operand0): Ditto.
- (parse_expr): Ditto.
- (parse_then_alternative): Ditto.
- (parse_else_alternative): Ditto.
- (parse_if_expression): Ditto.
- (parse_untyped_expr): Ditto.
- (growbuf_by_size): Ditto.
- (match_simple_name_string): Ditto.
- (decode_integer_value): Ditto.
- (decode_integer_literal): Ditto.
- (match_float_literal): Ditto.
- (match_float_literal): Ditto.
- (match_string_literal): Ditto.
- (match_character_literal): Ditto.
- (match_integer_literal): Ditto.
- (match_bitstring_literal): Ditto.
- (write_lower_upper_value): Ditto.
- * ch-lang.h (type_lower_upper): Ditto.
- * c-lang.c (emit_char): Ditto.
- * dwarfread.c (free_utypes): Ditto.
- * stabsread.h (resolve_cfront_continuation): Ditto.
- * stabsread.c (get_substring): Ditto.
- (read_one_struct_field): Ditto.
- * stabsread.h (process_later): Ditto.
- * demangle.c (set_demangling_command): Ditto.
- * defs.h (set_demangling_style): Ditto.
- * maint.c (maintenance_info_command): Ditto.
- (print_section_table): Ditto.
- (maintenance_info_sections): Ditto.
- (maintenance_print_command): Ditto.
- * symtab.h (maintenance_print_statistics): Ditto.
- * objfiles.h (in_plt_section): Ditto.
- * objfiles.c (add_to_objfile_sections): Ditto.
- * bcache.c (hash): Ditto.
- (lookup_cache): Ditto.
- * exec.c (bfdsec_to_vmap): Ditto.
- (ignore): Ditto.
- * f-exp.y (growbuf_by_size, match_string_literal): Ditto.
- * language.c (unk_lang_printchar): Ditto.
- (unk_lang_printstr): Ditto.
- (unk_lang_create_fundamental_type): Ditto.
- (unk_lang_print_type): Ditto.
- (unk_lang_val_print): Ditto.
- (unk_lang_value_print): Ditto.
- * target.c (update_current_target): Ditto.
- (debug_to_open): Ditto.
- (debug_to_close): Ditto.
- (debug_to_attach): Ditto.
- (debug_to_detach): Ditto.
- (debug_to_resume): Ditto.
- (debug_to_wait): Ditto.
- (debug_to_fetch_registers): Ditto.
- (debug_to_store_registers): Ditto.
- (debug_to_prepare_to_store): Ditto.
- (debug_to_xfer_memory): Ditto.
- (debug_to_files_info): Ditto.
- (debug_to_insert_breakpoint): Ditto.
- (debug_to_remove_breakpoint): Ditto.
- (debug_to_terminal_init): Ditto.
- (debug_to_terminal_inferior): Ditto.
- (debug_to_terminal_ours_for_output): Ditto.
- (debug_to_terminal_ours): Ditto.
- (debug_to_terminal_info): Ditto.
- (debug_to_kill): Ditto.
- (debug_to_load): Ditto.
- (debug_to_lookup_symbol): Ditto.
- (debug_to_create_inferior): Ditto.
- (debug_to_mourn_inferior): Ditto.
- (debug_to_can_run): Ditto.
- (debug_to_notice_signals): Ditto.
- (debug_to_thread_alive): Ditto.
- (debug_to_stop): Ditto.
-start-sanitize-gdbtk
- * gdbtk.c (null_routine): Ditto.
- (gdbtk_flush): Ditto.
- (gdbtk_fputs): Ditto.
- (gdbtk_query): Ditto.
- (gdbtk_readline): Ditto.
- (gdbtk_readline_end): Ditto.
- (gdb_get_breakpoint_list): Ditto.
- (gdb_get_breakpoint_info): Ditto.
- (breakpoint_notify): Ditto.
- (gdbtk_create_breakpoint): Ditto.
- (gdbtk_delete_breakpoint): Ditto.
- (gdbtk_modify_breakpoint): Ditto.
- (gdb_loc): Ditto.
- (gdb_eval): Ditto.
- (gdb_sourcelines): Ditto.
- (map_arg_registers): Ditto.
- (get_register_name): Ditto.
- (gdb_regnames): Ditto.
- (get_register): Ditto.
- (gdb_fetch_registers): Ditto.
- (register_changed_p): Ditto.
- (gdb_changed_register_list): Ditto.
- (gdb_cmd): Ditto.
- (call_wrapper): Ditto.
- (gdb_listfiles): Ditto.
- (gdb_stop): Ditto.
- (gdbtk_dis_asm_read_memory): Ditto.
- (compare_lines): Ditto.
- (gdb_disassemble): Ditto.
- (tk_command): Ditto.
- (cleanup_init): Ditto.
- (gdbtk_interactive): Ditto.
- (x_event): Ditto.
- (gdbtk_wait): Ditto.
- (gdbtk_call_command): Ditto.
- (tk_command_loop): Ditto.
- (gdbtk_init): Ditto.
-end-sanitize-gdbtk
- * breakpoint.h (set_breakpoint_sal): Ditto.
- * remote-utils.c (usage): Ditto.
- * remote.c (set_thread): Ditto.
- (remote_thread_alive): Ditto.
- (get_offsets): Ditto.
- (read_frame): Ditto.
- (remote_insert_breakpoint): Ditto.
- (remote_remove_breakpoint): Ditto.
- * sparc-nat.c (fetch_core_registers): Ditto.
- * corelow.c (add_to_thread_list): Ditto.
- (ignore): Ditto.
- * inftarg.c (proc_wait): Ditto.
- * infptrace.c (udot_info): Ditto.
- (fetch_register): Ditto.
- * ser-unix.c (hardwire_noflush_set_tty_state): Ditto.
- (hardwire_print_tty_state): Ditto.
- (hardwire_flush_output): Ditto.
- (hardwire_flush_input): Ditto.
- (hardwire_send_break): Ditto.
- (hardwire_setstopbits): Ditto.
- * ser-tcp.c (tcp_return_0): Ditto.
- (tcp_noflush_set_tty_state): Ditto.
- (tcp_print_tty_state): Ditto.
- * solib.c (match_main): Ditto.
- * gdbtypes.c (print_bit_vector): Ditto.
- (print_arg_types): Ditto.
- (dump_fn_fieldlists): Ditto.
- (print_cplus_stuff): Ditto.
- * symfile.h (entry_point_address): Ditto.
- * symfile.c (decrement_reading_symtab): Ditto.
- * valops.c (value_arg_coerce): Ditto.
- * value.h (find_function_in_inferior): Ditto.
- (value_allocate_space_in_inferior): Ditto.
- * values.c (vb_match): Ditto.
- * thread.c (info_thread_command): Ditto.
- (restore_current_thread): Ditto.
- (thread_apply_all_command): Ditto.
- (thread_apply_command): Ditto.
- * inferior.h (write_pc_pid): Ditto.
- * infrun.c (delete_breakpoint_current_contents): Ditto.
- * breakpoint.c (print_it_normal): Ditto.
- (watchpoint_check): Ditto.
- (print_it_done): Ditto.
- (print_it_noop): Ditto.
- (maintenance_info_breakpoints): Ditto.
- (create_longjmp_breakpoint): Ditto.
- (hbreak_command): Ditto.
- (thbreak_command): Ditto.
- (watch_commnd_1): Ditto.
- (rwatch_command): Ditto.
- (awatch_command): Ditto.
- (do_enable_breakpoint): Ditto.
- * ch-valprint.c (chill_val_print_array_elements): Ditto.
- * eval.c (evaluate_subexp): Ditto.
- (get_label): Ditto.
- (evaluate_struct_tuple): Ditto.
- * eval.c (init_array_element): Ditto.
-
- * alpha-tdep.c (push_sigtramp_desc): Add prototype and make static.
- * breakpoint.c (hw_breakpoint_used_count): Ditto.
- (hw_watchpoint_used_count): Ditto.
- * findvar.c (write_register_gen): Ditto.
- (read_register_pid): Ditto.
- * symtab.c (cplusplus_hint): Ditto.
- * infcmd.c (breakpoint_auto_delete_contents): Ditto.
- * ch-valprint.c (chill_print_type_scalar): Ditto.
- * gdbtypes.c (add_name): Ditto.
- (add_mangled_type): Ditto.
- (cfront_mangle_name): Ditto.
- * sparc-tdep.c (isbranch): Ditto.
- * inftarg.c (child_stop): Ditto.
- * win32-nat.c (child_stop): Ditto.
- * mac-nat.c (child_stop): Ditto.
- * remote-utils.c (sr_com): Ditto.
- * dbxread.c (process_now): Ditto.
- * ch-exp.c (require): Ditto.
- (check_token): Ditto.
- (expect): Ditto.
- (parse_mode_call): Ditto.
- (parse_mode_or_normal_call): Ditto.
- * scm-lang.c (scm_lookup_name): Ditto
- * f-lang.c (allocate_saved_bf_node): Ditto.
- (allocate_saved_function_node): Ditto.
- (allocate_saved_f77_common_node): Ditto.
- (allocate_common_entry_node): Ditto.
- (add_common_block): Ditto.
- (add_common_entry): Ditto.
- (find_first_common_named): Ditto.
- (patch_common_entries): Ditto.
- (patch_all_commons_by_name): Ditto.
- (clear_bf_list): Ditto.
- (get_bf_for_fcn): Ditto.
- (clear_function_list): Ditto.
- * scm-exp.c (scm_istr2int): Ditto.
- (scm_istring2number): Ditto.
- * scm-valprint.c (scm_inferior_print): Ditto.
- * f-typeprint.c (print_equivalent_f77_float_type): Ditto.
- * f-valprint.c (f77_get_dynamic_length_of_aggregate): Ditto.
- (f77_create_arrayprint_offset_tbl): Ditto.
- (f77_print_array_1): Ditto.
- (f77_print_array): Ditto.
- (list_all_visible_commons): Ditto.
- (there_is_a_visible_common_named): Ditto.
- * mdebugread.c (ecoff_relocate_efi): Ditto.
- * callback.c (os_close): Ditto.
- (os_get_errno): Ditto.
- (os_isatty): Ditto.
- (os_lseek): Ditto.
- (os_open): Ditto.
- (os_read): Ditto.
- (os_read_stdin): Ditto.
- (os_write): Ditto.
- (os_write_stdout): Ditto.
- (os_rename): Ditto.
- (os_system): Ditto.
- (os_time): Ditto.
- (os_unlink): Ditto.
- (os_shutdown): Ditto.
- (os_init): Ditto.
- (os_printf_filtered): Ditto.
-
- * scm-lang.h (scm_parse): Change old style decl to prototype.
- * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): Ditto.
- * top.c (init_proc): Ditto.
- (query_hook): Ditto.
- (error_hook): Ditto.
- * f-lang.c (c_value_print): Ditto.
- * ch-exp.c (parse_expression): Ditto.
- (parse_primval): Ditto.
- (parse_untyped_expr): Ditto.
- (parse_opt_untyped_expr): Ditto.
- (ch_lex): Ditto.
- * config/sparc/tm-sparc.h (sparc_init_extra_frame_info): Ditto.
- (sparc_frame_saved_pc): Ditto.
- (sparc_push_dummy_frame): Ditto.
- (sparc_pop_frame): Ditto.
- * defs.h (fclose): Ditto.
- (atof): Ditto.
- (error_hook): Ditto.
-
- * arc-tdep.c (single_step): Change arg to type "enum target_signal".
- * rs6000-tdep.c (single_step): Ditto.
- * sparc-tdep.c (single_step): Ditto.
-
- * breakpoint.c (cleanup_executing_breakpoints): Change unused arg type
- to PTR which is what make_cleanup expects.
- * utils.c (null_cleanup): Change arg type to PTR.
- * defs.h (null_cleanup): Change prototype to match actual function.
- * config/sparc/tm-sparc.h (struct frame_info): Move forward decl.
- * ch-valprint.c (chill_val_print): Cast 2nd arg of
- chill_print_type_scalar to LONGEST.
- * infrun.c (wait_for_inferior): Have empty switch case for
- BPSTAT_WHAT_CHECK_SHLIBS when SOLIB_ADD is not defined.
- (stop_on_solib_events): Only needed if SOLIB_ADD is defined.
- * infcmd.c (attach_command): Only need auto_solib_add if SOLIB_ADD
- is defined.
- * symfile.c (generic_load): Scan long int using a long int spec,
- not an int spec.
- * infptrace.c (udot_info): Only need local variables if KERNEL_U_SIZE
- is defined.
- (fetch_register): Only need function if FETCH_INFERIOR_REGISTERS is
- not defined.
- * inflow.c (handle_sigio): Only need prototype when the actual
- function is compiled in.
- * valprint.c (longest_to_int): Expand error message to be
- separate messages for args larger than largest signed int
- and args smaller than smallest signed int.
- * valprint.c (print_longest): Fix problems with support for case
- where compiler supports type "long long" but the runtime doesn't
- support printing them with "%ll".
- * scm-valprint.c (scm_scmlist_print, scm_scmval_print): Change
- return types to void since we don't actually return anything
- meaningful and callees ignore the values anyway.
- * procfs.c (modify_inherit_on_fork_flag): Enclose pr_flags in PIOCSET
- ifdef.
- (modify_run_on_last_close_flag): Ditto.
- (wait_fd): Enclose local variables "num_fds" and "i" LOSING_POLL
- ifdef
- * alpha-tdep.c (push_sigtramp_desc): Return proc_desc rather than
- random value.
- * infrun.c (wait_for_inferior): Ensure random_signal is not used
- uninitialized.
- * valops.c (call_function_by_hand): Ensure struct_addr is not used
- uninitialized.
- * breakpoint.c (watch_command_1): Ensure prev_frame is not used
- uninitialized.
- * utils.c (vfprintf_maybe_filtered): Change second arg from "char *"
- to "const char *".
-start-sanitize-gdbtk
- * gdbtk.c (gdb_fetch_registers): Cast fourth arg to map_arg_registers
- to proper pointer type, from int.
- (gdbtk_query): Change first arg to "const char *" from "char *".
-end-sanitize-gdbtk
- * infptrace.c (udot_info): Add two dummy args so that the type is
- correct for passing to add_info.
- * f-lang.c (saved_fcn): Move decl to head of file so it can be used
- in prototypes.
- (saved_bf_symnum): Ditto.
- (SAVED_FUNCTION): Ditto.
- (SAVED_FUNCTION_PTR): Ditto.
- (SAVED_BF): Ditto.
- (SAVED_BF_PTR): Ditto.
- * ch-exp.c (parse_named_record_element): Build error message in
- temporary buffer before passing it to expect, rather than passing
- wrong number of args to expect.
- * demangle.c (set_demangling_style): Call set_demangling_command with
- correct number of arguments.
- * inferior.h (terminal_init_inferior_with_pgrp): Change arg type to
- int to match actual function.
- (os_isatty): Call fdmap with right number of arguments, was missing
- the host_callback* arg.
- * target.c (cleanup_target): Prototype all functions casts.
- * target.h (one_stepped, single_step): Declare here and convert
- single_step to prototype.
- * infrun.c (one_stepped, single_step): Don't declare externs
- here, they have moved to target.h.
- * eval.c (init_array_element): Declare previously undeclared
- last two args as LONGEST.
- * dcache.c (dcache_xfer_memory): Change xfunc decls to prototype form.
-start-sanitize-gdbtk
- * gdbtk.c (register_changed_p): Remove unused local variable "buf".
-end-sanitize-gdbtk
-
-Thu Jul 25 16:11:54 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * dsrec.c (load_srec): Protect ANSI style function parms with PARAMS.
-
-Mon Jul 22 18:13:27 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in (os9kread.o): Remove dependency on partial-stab.h.
- * dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h: Don't
- use partial_symtab->textlow==0 as a flag, as 0 is a legitimate
- text address. Use a seperate flag (textlow_not_set) instead.
- This makes stabs in ELF .o files work a lot better.
- * mdebugread.c xcoffread.c: Define textlow_not_set for
- partial-stab.h.
- * stabsread.h (end_psymtab): Add textlow_not_set arg to prototype.
-
-start-sanitize-gdbtk
-Sat Jul 20 17:46:40 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (files_command): Reorder the binding tags for
- the listbox widget to avoid referencing the listbox after
- the containing widget has been destroyed by the action of
- a previous binding.
-end-sanitize-gdbtk
-
-Sat Jul 20 10:41:06 1996 Fred Fish <fnf@cygnus.com>
-
- * dwarf2read.c (struct filenames): Change internal "struct file"
- to "struct fileinfo" to avoid conflict with "struct file" in
- <sys/file.h> on HPUX and Solaris.
-
-start-sanitize-gdbtk
-Sat Jul 20 10:09:28 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (delete_expr): Unset corresponding element of
- expr_update_list when destroying an expression.
- (create_expr_window): Initialize expr_num, delete_expr_num,
- and expr_update_list here when each new expression window
- is created, rather than once at startup.
-end-sanitize-gdbtk
-
-Fri Jul 19 14:05:57 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * dwarf2read.c: New file, DWARF 2 reader originally contributed by
- Brent Benson, with additions by Gary Funck and Jerry Kreuscher.
- * Makefile.in (COMMON_OBS): Add dwarf2read.o.
- (SFILES): Add dwarf2read.c.
- (dwarf2read.o): Add build rule.
- * symfile.h (dwarf2_has_info, dwarf2_build_psymtabs): Declare
- exported functions.
- * elfread.c (elf_symfile_read): Call them.
- (elf_symtab_read) [HARRIS_TARGET]: Skip some special symbols.
-
-Thu Jul 18 01:22:01 1996 Geoffrey Noer <noer@cygnus.com>
-
- * symfile.c (symfile_bfd_open):
- * exec.c (exec_file_command): for __GO32__ and __WIN32__ systems,
- free the user from having to type the .exe extension.
-
-Wed Jul 17 06:54:50 1996 Mark Alexander <marka@cygnus.com>
-
- * mon960-rom.c: Shorten the mon960_inits string to a single
- carriage return; this prevents a hang on connecting immediately
- after powerup, when MON960 is attempting autobaud detection.
-
-Tue Jul 16 23:47:04 1996 Mark Alexander <marka@cygnus.com>
-
- * a29k-tdep.c (get_saved_register): Allow PC to be modified
- when innermost frame is selected, but not in outer frames.
-
-Tue Jul 16 23:37:25 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * command.c (do_setshow_command): Don't segfault when showing
- var_string and var_string_noescape vars that are NULL.
-
-Mon Jul 15 16:55:48 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * win32-nat.c (handle_load_dll): dos_path_to_unix_path renamed to
- cygwin32_conv_to_posix_path.
- (child_create_inferior): unix_path_to_dos_path renamed to
- cygwin32_conv_to_win32_path. Rewrite code to translate PATH.
-
-Mon Jul 15 16:44:05 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * defs.h printcmd.c: Create global disassemble_info structure
- tm_print_insn_info.
-start-sanitize-gdbtk
- * gdbtk.c (gdb_disassemble): Setup di.mach from
- tm_print_insn_info.mach, and set endian from TARGET_BYTE_ORDER.
-end-sanitize-gdbtk
- * i386-tdep.c (set_assembly_language_command): set
- tm_print_insn_info.mach to the appropriate value for 386 or 8086
- disassembly.
- * printcmd.c (print_insn): Move init of disassembler_info to
- _initialize_printcmd. Set endian for disassembler here.
- * sparc-tdep.c: Set tm_print_insn_info.mach as appropriate to
- select sparc/sparclite.
- * config/sparc/{tm-sparc.h tm-sparclite.h}: Get rid of
- TM_PRINT_INSN. Set TM_PRINT_INSN_MACH to
- bfd_mach_sparc/bfd_mach_sparc_sparclite.
-
-Fri Jul 12 19:04:32 1996 Fred Fish <fnf@cygnus.com>
-
- * hpread.c (hpread_lookup_type): Use xmmalloc/xmrealloc rather
- than xmalloc/xrealloc.
-
-Fri Jul 12 17:59:47 1996 Fred Fish <fnf@cygnus.com>
-
- * objfiles.c (map_to_file): Error return from mmalloc_findbase is
- a NULL pointer, not a -1.
-
-Fri Jul 12 10:16:24 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * i386-tdep.c (set_assembly_language_command): New routine to
- select between i386 and i8086 instruction sets for disassembly.
- New command `set assembly-language {i386 i8086}'.
-
-Thu Jul 11 21:13:21 1996 Mark Alexander <marka@cygnus.com>
-
- * monitor.c (monitor_write_memory, monitor_read_memory_single):
- Disable use of "long long" memory read/write commands; can't
- use them because we hold the values to read/write in an int
- variable, and because strtoul fails on values that exceed the
- size of a long. This fixes breakpoint problems on MON960.
-
-Thu Jul 11 11:39:31 1996 Fred Fish <fnf@cygnus.com>
-
- * config/m68k/xm-hp300hpux.h (HAVE_MMAP): Remove definition.
- * config/pa/xm-hppah.h (HAVE_MMAP): Ditto.
-
-Wed Jul 10 16:54:41 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE
- and MMALLOC_CHECK macros, and add comment indicating how host dependent
- makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
- to use it but to not do heap corruption checking.
- * gdbserver/Makefile.in: Ditto.
- * utils.c (init_malloc): Replace warning() use with direct call of
- fprintf_unfiltered, since current_target has not yet been set and thus
- we cannot use warning(). If we try to use mmcheck and it fails,
- suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
- defined. Other small mmalloc related cleanups.
- * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
- * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
-
- * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
- * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- Remove obsolete defines.
-
- * config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
- * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
- * config/rs6000/rs6000.mh (MMALLOC_DISABLE):
- * config/rs6000/aix4.mh (MMALLOC_DISABLE):
- * config/powerpc/aix4.mh (MMALLOC_DISABLE):
- * config/powerpc/aix.mh (MMALLOC_DISABLE):
- * config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
- * config/mips/mipsm3.mh (MMALLOC_DISABLE):
- * config/mips/decstation.mh (MMALLOC_DISABLE):
- * config/m88k/cxux.mh (MMALLOC_DISABLE):
- * config/i386/i386mk.mh (MMALLOC_DISABLE):
- * config/i386/i386m3.mh (MMALLOC_DISABLE):
- * config/i386/i386gnu.mh (MMALLOC_DISABLE):
- Use MMALLOC_CFLAGS instead.
-
-Tue Jul 9 22:41:12 1996 Jeffrey A Law (law@cygnus.com)
-
- * h8300-tdep.c: Remove some outdated comments.
- (h8300_skip_prologue): Rework to be more correct for the H8/300H.
- Handle stm.l insns for the H8/S.
- (examine_prologue): Likewise.
-
-Tue Jul 9 16:48:55 1996 Raymond Jou <rjou@mexican.cygnus.com>
-
- * ser-mac.c (mac_close): Change a typo SetSetBuf to SerSetBuf.
-
-Mon Jul 08 08:50:39 1996 Mark Alexander <marka@cygnus.com>
-
- * mon960-rom.c (mon960_open): Add floating point detection to
- prevent hang on non-FPU processors (PR 9775).
- (mon960_cmds): Swap setmem.cmdw and setmem.cmdl to fix problem
- setting breakpoints and improve loading speed.
-
-Sun Jul 7 14:57:34 1996 Fred Fish <fnf@cygnus.com>
-
- * coffread.c (record_minimal_symbol): Don't presave name string
- on symbol_obstack before passing to prim_record_minimal_symbol.
- It now handles saving the string itself.
- * dbxread.c (read_dbx_dynamic_symtab): Ditto.
- * mipsread.c (read_alphacoff_dynamic_symtab): Ditto.
- * os9kread.c (record_minimal_symbol): Ditto.
- * solib.c (solib_add_common_symbols): Ditto.
-
- * coffread.c (coff_symtab_read): Don't presave name string on
- symbol_obstack before passing to prim_record_minimal_symbol_and_info.
- It now handles saving the string itself.
- * dbxread.c (record_minimal_symbol): Ditto.
- * elfread.c (record_minimal_symbol_and_info): Ditto.
-
- * dstread.c (record_minimal_symbol): Remove static function that just
- called prim_record_minimal_symbol with the same args (after change to
- prim_record_minimal_symbol to do it's own name string saves).
- * nlmread.c (record_minimal_symbol): Ditto.
- * somread.c (record_minimal_symbol): Ditto.
-
- * hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack.
- (hpread_read_function_type): Ditto.
- (hpread_process_one_debug_symbol): Ditto.
- * mdebugread.c (parse_symbol): Ditto.
- (new_symbol): Ditto.
- * minsyms.c (prim_record_minimal_symbol_and_info): Ditto.
-
- * coffread.c (process_coff_symbol): Use obsavestring to save
- SYMBOL_NAME, rather than obstack_copy0.
- * dstread.c (create_new_symbol): Ditto
- * symfile.c (obconcat): Ditto.
- * stabsread.c (patch_block_stabs): Ditto.
- * xcoffread.c (SYMNAME_ALLOC): Ditto.
-
- * symfile.c (obsavestring): Update comments
- * solib.c (solib_add_common_symbols): Remove local var origname.
-
-Wed Jul 3 15:56:08 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * configure: Re-build with autoconf-2.10.
-
- * sparcl-tdep.c (_initialize_sparc_tdep) config/sparc/tm-sparc.h,
- config/sparc/tm-sparclite.h: Initialize tm_print_insn from
- TM_PRINT_INSN, which comes from the tm file.
-
-Tue Jul 02 21:41:20 1996 Mark Alexander <marka@cygnus.com>
-
- * coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c,
- os9kread.c: Replace identical sym_offsets functions with
- default_symfile_offsets.
- * somread.c (som_symfile_offsets): Use new SIZEOF_SECTION_OFFSETS
- macro to allocate section_offsets.
- * symfile.c (default_symfile_offsets): New function.
- * symfile.h: Declare default_symfile_offsets.
- * symtab.h: Define SIZEOF_SECTION_OFFSETS macro to
- simplify allocation of section_offsets.
-
-Tue Jun 11 12:02:55 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
- * configure configure.in: Only make sol-thread.o for native.
- Also, switch to dlopened libthread_db.so.1.
- * sol-thread.c: Switch to using dlopen to get the thread_db
- library.
-
-Thu Jun 13 16:53:25 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * configure, configure.in: Change test for libthread_db to only
- work for configs where build/host/target are the same.
-
-Tue Jul 2 15:04:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/{linux.mh,xm-linux.h}: New files, for Linux on
- PowerPC.
-
- * configure.in (powerpc-*-linux): Add Linux, System V, and ELF
- support.
- * configure: Regenerate.
-
-Mon Jul 1 13:00:43 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- From Raymond Jou <rjou@mexican.cygnus.com>:
- * mpw-make.sed: Add lines to whack out autoconf hook
- @CONFIG_LDFLAGS@.
-
-Mon Jul 01 11:07:15 1996 Mark Alexander <marka@cygnus.com>
-
- * remote-e7000.c (e7000_stop): New function.
-
-Fri Jun 28 06:34:19 1996 Dawn Perchik <dawn@cygnus.com>
-
- * configure, configure.in: Add target sparclet.
- * monitor.h, monitor.c: Added monitor flags MO_NO_ECHO_ON_SETMEM
- (don't expect echo on setmem command), MO_RUN_FIRST_TIME (if
- command to start process running on target is different from one
- to continue execution), MO_HEX_PREFIX (if addresses from monitor
- have a "0x" prefix).
- * monitor.c, parse.c, sparc-tdep.c: Don't require strings in the
- registers array. This is to allow NULLs to be place holders in
- the tm-*.h file so that only minor changes are needed when a new
- processor is introduced (eg, one without floating point).
- * sparc-tdep.c: Conditionally remove dependancies on floating
- point.
- * sparclet-rom.c, config/sparc/sparclet.mt,
- config/sparc/tm-sparclet.h: New files for target sparclet.
- * symfile.c (load_command): Add option for 2nd parameter; a load
- offset added to the vma of each section.
-
-Fri Jun 28 05:39:19 1996 Dawn Perchik <dawn@cygnus.com>
-
- * main.c (main): Add option "l" for setting remote_timeout.
-
-Fri Jun 28 05:25:18 1996 Dawn Perchik <dawn@cygnus.com>
-
- * remote-e7000.c, remote.c, target.h, top.c: Add set option
- "remote_timeout" for setting remote_timeout. Add set option
- "use_hard_breakpoints" for setting hardware .vs. memory
- breakpoints.
-
-Fri Jun 28 04:32:18 1996 Dawn Perchik <dawn@cygnus.com>
-
- * remote-e7000.c (e7000_parse_device): New function.
- Add option "tcp_remote" to target command if using
- tcp to connect to a remote host which is then connected
- via serial port to the e7000 (for exampole, a port master).
- (e7000_open): Change to call e7000_parse_device.
-
-Fri Jun 28 03:47:17 1996 Dawn Perchik <dawn@cygnus.com>
-
- * monitor.c (monitor_debug): Fix remotedebug buffering.
-
-Thu Jun 27 18:24:17 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/i386/cygwin32.mh, config/powerpc/cygwin32.mh
- (NATDEPFILES): Add a space.
-
-Wed Jun 26 06:05:39 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * gdbtypes.c (create_array_type): If TYPE_LENGTH (result_type)
- is zero, set TYPE_FLAG_TARGET_STUB to force reevaluation of the type.
-
- * ch-exp.c (calculate_array_length): Function removed.
-
-Tue Jun 25 17:41:06 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * remote-e7000.c (e7000_read_inferior_memory_large): New function.
- (e7000_xfer_inferior_memory): Call it.
-
-Tue Jun 25 23:14:07 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
-
- * gdb/gdbserver/Makefile.in (docdir): Removed.
-
-Tue Jun 25 22:05:38 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
-
- * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
- Use autoconf set values.
- (docdir): Removed.
- * configure.in (AC_PREREQ): autoconf 2.5 or higher.
- * nlm/Makefile.in (bindir, libdir, datadir, mandir, infodir,
- includedir): Use autoconf set values.
- (docdir): Removed.
- * nlm/configure.in (AC_PREREQ): autoconf 2.5 or higher.
- * nlm/configure: Rebuilt.
- * gdb/gdbserver/Makefile.in (datadir): Set to $(prefix)/share.
-
-Mon Jun 24 09:56:14 1996 Angela Marie Thomas (angela@cygnus.com)
-
- * stabsread.c (read_cfront_member_functions): add type
-
-Sun Jun 23 23:40:48 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * win32-nat.c: #include <unistd.h>.
- (unix_paths_to_dos_paths, dos_paths_to_unix_paths): Delete.
- (child_create_inferior): Convert only env var PATH to win32 style.
- (set_pathstyle_dos): Delete.
- (_initialize_inftarg): Delete dos-path-style command.
-
-start-sanitize-gdbtk
-Fri Jun 21 11:04:47 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (create_register_windows): Include missing '$'s.
- Add global declarations for various reg_format_* variables.
- * gdbtk.tcl (populate_register_window): Make initial window one
- line taller to account for new column header line.
-
-Fri Jun 21 09:46:47 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.c (get_register): Support for printing raw formats.
- * gdbtk.tcl: Add hint for using debug_interface.
- (center_window, add_breakpoint_frame, delete_breakpoint_frame):
- Enclose arg in braces for consistency.
- (create_registers_window, populate_reg_window, update_registers):
- Major rewrite to support displaying multiple formats in the register
- window.
- (init_reg_info): New function.
- (recompute_reg_display_list): Reset reg_display_list, start
- register display lines at line 2.
-
-end-sanitize-gdbtk
-Thu Jun 20 13:42:23 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * configure.in: Revise sol-thread.o test.
- * configure: Regenerated.
-
- * source.c (find_source_lines): Reassign size to result of read.
-
-start-sanitize-gdbtk
-Thu Jun 20 08:18:59 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (gdbtk_tcl_readline_begin): Handle backspace to
- avoid backing up over prompt. At every input, make sure insert
- point is at least after command start, handle control-u to delete
- current input line.
- (tclsh): Handle backspace to avoid backing up over prompt. Handle
- control-u to delete current input line.
-
-Wed Jun 19 17:23:38 1996 Geoffrey Noer <noer@cygnus.com>
-
- * configure.in: disable gdbtk for *cygwin32* hosted compiles
- * configure: regenerated with autoconf 2.8
-
-end-sanitize-gdbtk
-Tue Jun 18 16:25:54 1996 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S.
- (h8300_command): Likewise.
- (set_machine): Likewise.
- (set_machine_hook): Likewise.
- (_initialize_h8300m): Likewise.
-
- * config/h8300/tm-h8300.h (h8300smode): Declare.
-
-Sun Jun 16 15:21:51 1996 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * somsolib.c (som_solib_create_inferior_hook): Handle tracking
- of shl_load calls for hpux10.
-
-Thu Jun 13 11:16:10 1996 Tom Tromey <tromey@thepub.cygnus.com>
-
- * config.in: Regenerated.
- * acconfig.h (HAVE_THREAD_DB_LIB): Added entry.
-
- * configure: Regenerated.
- * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to
- avoid name clashes with SunOS headers.
-
-Tue Jun 11 19:52:50 1996 Fred Fish <fnf@cygnus.com>
-
- From Michael Snyder <Michael_Snyder@next.com>:
- * bcache.c (print_bcache_statistics): Avoid divide-by-zero
- exception if one or more objfile has no symbols, such as when
- a dynamic library has been stripped.
-
-Tue Jun 11 12:02:55 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
- * configure configure.in: Only make sol-thread.o for native.
- Also, switch to dlopened libthread_db.so.1.
- * sol-thread.c: Switch to using dlopen to get the thread_db
- library.
-
-Mon Jun 10 14:17:19 1996 Fred Fish <fnf@cygnus.com>
-
- * config/sparc/{xm-sun4sol2.h,xm-sun4os4.h} (MMAP_BASE_ADDRESS):
- Change from 0xE0000000 to 0xC0000000.
-
-Thu Jun 6 17:10:32 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/xm-solaris.h: Initial version of support for
- Solaris on PowerPC.
-
-Wed Jun 5 01:52:57 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * configure.in (configdirs): Force 4100 builds to use 4300 GDB
- target.
- * configure: Rebuild.
-
- * config/mips/vr4300el.mt (SIM_OBS): Include simulator in
- little-endian builds.
-
-Mon Jun 3 11:48:29 1996 Jeffrey A Law (law@cygnus.com)
-
- * inftarg.c (child_thread_alive): Protect declaration with
- #ifndef CHILD_THREAD_ALIVE.
-
- * source.c (find_source_lines): Check the time on the symtab's bfd if
- it exists, else check the time on the exec_bfd.
-
-Thu May 30 09:43:17 1996 Mark Alexander <marka@cygnus.com>
-
- * dsrec.c (make_srec): Fix calculation of address size
- to allow addresses less than 0x100.
-
-Thu May 30 04:24:09 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-exp.c (ch_lex): In case of LOC_TYPEDEF call calculate_array_length.
-
-Tue May 28 16:15:47 1996 Geoffrey Noer <noer@cygnus.com>
-
- * remote-mips.c: cannot use EINVAL for breakpoint test since
- its value varies for different hosts (e.g. go32's is 19, while
- sunos is 22). Changed to hardcoded 22 since that is what the
- mips boards return.
-
-Tue May 28 11:14:58 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * configure: Regenerated.
- * aclocal.m4 (CY_AC_PATH_TCLH): Don't use AC_TRY_RUN.
- (CY_AC_PATH_TKH): Don't use AC_TRY_RUN.
-
-Sun May 26 16:56:35 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * solib.c (solib_absolute_prefix, solib_search_path): New variables.
- (_initialize_solib): Add set/show commands for those variables.
- (solib_map_sections): Implement searching using them.
-
-Sun May 26 14:14:49 1996 Fred Fish <fnf@cygnus.com>
-
- Changes from: David Mosberger-Tang <davidm@azstarnet.com>
-
- * NEWS: Add Alpha Linux as a new native configuration.
-
- * mdebugread.c (parse_symbol): When we find a malloc() symbol with
- return type VOID, assume no debugging info is available for that
- object file and patch the return value into VOID *. Otherwise,
- operations requiring an implicit call to malloc() will fail.
-
- * infrun.c (wait_for_inferior): The criterion to detect entering a
- sigtramp handler is now: (a) the current pc is inside a sigtramp
- handler, (b) the previous pc is not in a sigtramp handler, and (c)
- the current stack pointer is "inner" than the old one. Condition
- (c) is new to avoid mistaking a return from a signal handler into
- sigtramp as a new sigtramp invocation.
-
- * dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
- int may not be big enough to hold an address.
- (dcache_hit): Ditto.
- (dcache_peek_byte): Fix indentation.
-
- * configure.in (alpha-*-linux*): Add target.
- * configure: Rebuild
-
- * config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
- (SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
- (DYNAMIC_SIGTRAMP_OFFSET): Ditto.
- (SIGCONTEXT_ADDR): Ditto.
- (FRAME_PAST_SIGTRAMP_FRAME): Ditto.
-
- * config/alpha/alpha-linux.mh: New file.
- * config/alpha/alpha-linux.mt: Ditto.
- * config/alpha/nm-linux.h: Ditto.
- * config/alpha/tm-alphalinux.h: Ditto.
- * config/alpha/xm-alphalinux.h: Ditto.
- * config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
- * config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
- xm-alphaosf.h.
- * config/alpha/alpha-osf2.mh: Ditto.
-
- * blockframe.c (find_pc_partial_function): Pass PC to
- SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
- that detect sigtramp code via designated code sequences (as is the
- case for Linux/Alpha, for example).
-
- * config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
- to ignore new PC argument.
- * config/m68k/tm-hp300bsd.h: Ditto.
- * config/vax/tm-vax.h: Ditto.
-
- * alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
- (alpha_osf_skip_sigtramp_frame): Ditto.
- (push_sigtramp_desc): Ditto.
- (alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
- sigcontext address from frame.
- (alpha_saved_pc_after_call): When in sigtramp, use
- alpha_frame_saved_pc() instead of read-register().
- (after_prologue): When inside a dynamically generated sigtramp
- function, there is no prologue, so return address of first
- instruction.
- (alpha_in_prologue): Fix typo in comment.
- (find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
- whether we're inside a dynamicaly generated sigtramp function. If
- so, create and push and appropriate procedure descriptor.
- (alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
- the frame past a sigtramp frame (if the current frame is indeed a
- sigtramp function).
- (init_extra_frame_info): Don't read next frame register off of
- stack-pointer when inside a dynamiccaly generated sigtramp.
- (alpha_pop_frame): Also unlink and destroy procedure descriptors
- created for dynamically generated sigtramp functions.
-
- * alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
- <alpha/ptrace.h> instead of <machine/reg.h>
-
-Tue Jul 2 13:58:10 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_validate_task_sc):
- Give terminal to gdb while asking question.
- (inf_resume): Don't validate the task suspend-count while execing.
-
-Thu Jun 13 11:04:52 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_validate_task_sc): Query user before clearing any
- additional suspend count.
- (S_proc_wait_reply, gnu_attach): Don't call inf_validate_task_sc.
- (inf_resume): Call inf_validate_task_sc here.
- (gnu_resume): Call inf_update_procs to ensure noticing new threads.
-
-Fri Jun 7 17:00:43 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (gnu_create_inferior: attach_to_child): Return PID.
-
-Thu May 23 15:13:56 1996 Jeffrey A Law (law@cygnus.com)
-
- * h8300-tdep.c (IS_PUSH): Refine.
- (IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints.
- (IS_SUB4_SP, IS_SUBL_SP): New macros.
- (h8300_skip_prologue): Handle H8/300H prologue code sequences.
- (examine_prologue): Handle addresses from 0x010000 to 0xffffff
- when in H8/300H mode. Get the return pointer's address correctly
- for the H8/300H. Handle H8/300H prolouge code sequences.
-
- * symfile.c (generic_load): Print the starting address
- of the file just loaded.
-
-Thu May 23 12:09:52 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Edit @THREAD_DB_OBS@ out of makefile.
-
-Tue May 21 11:53:56 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * breakpoint.c (bpstat_do_actions): Avoid endless recursion
- if a `source' command is contained in bs->commands.
-
- * infrun.c (wait_for_inferior): Update step_frame_address when
- stepping into a new line.
-
- From schwab@issan.informatik.uni-dortmund.de (Andreas Schwab):
- * breakpoint.c (breakpoint_1): Add shlib_disabled case to
- bpenables array.
-
-Mon May 20 22:52:00 1996 Mark Alexander <marka@cygnus.com>
-
- * dsrec.c (load_srec): Add WAITACK parameter, for machines
- like EST visionICE that send back an ACK after each S-record.
- * monitor.c (monitor_wait_srec_ack): New function.
- (monitor_load): Pass monitor_wait_srec_ack to load_srec
- if the monitor's MO_SREC_ACK flag is set.
- * monitor.h: Define MO_SREC_ACK flag.
- * remote-est.c (est_cmds): Add MO_SREC_ACK flag.
- * sh3-rom.c (sh3_load): Accomodate change in load_srec prototype.
- * srec.h: Add WAITACK parameter to load_srec prototype.
-
-Sun May 19 21:22:00 1996 Rob Savoye <rob@chinadoll>
-
- * config/sparc/sparclite.mt: Add the sparc simulator.
-
-Sun May 19 16:49:37 1996 Fred Fish <fnf@cygnus.com>
-
- * defs.h (read_command_lines, query_hook): Update prototypes.
- (readline_begin_hook, readline_hook, readline_end_hook): Declare.
- * breakpoint.c (commands_command): Build message in temporary buffer
- and pass that, as well as tty control flag, to read_command_lines.
- * top.c (readline_begin_hook, readline_hook, readline_end_hook):
- Define here.
- (command_loop): Check for non-NULL instream before looping.
- (command_line_input): Use readline_hook when appropriate, to get
- user input from a GUI window.
- (read_next_line): Also build prompt if getting user input from a GUI.
- (recurse_read_control_structure): Fix typo in comment.
- (read_command_lines): Use passed in prompt and tty flag to decide how
- to build message. Use readline_begin_hook when appropriate, to set
- up a GUI interaction window. Just return head, whether NULL or not,
- after using readline_end_hook to complete GUI interaction.
- (define_command, document_command): Build message in a temporary
- buffer and pass it to read_command_lines, along with tty flag.
-
-start-sanitize-gdbtk
- * gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end):
- New functions.
- (tk_command_loop): Set instream to NULL to enable Tk user interaction.
- (gdbtk_init): Set readline_begin_hook, readline_hook,
- and readline_end_hook.
- * gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline,
- gdbtk_tcl_readline_end): New functions.
- (tclsh): Pack scroll bar on right side of window, not left.
-end-sanitize-gdbtk
-
-Sat May 18 02:43:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * blockframe.c (frameless_look_for_prologue):
- Add FUNCTION_START_OFFSET only if func_start is non-zero.
- * minsyms.c (lookup_minimal_symbol_by_pc): Return NULL if
- pc is not in a known section.
- * stack.c (print_frame_info): Remove check for fi->pc in known
- section, now handled by lookup_minimal_symbol_by_pc.
-
-start-sanitize-gdbtk
-Fri May 17 13:54:34 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (create_command_window): Change a misspelled "get"
- to the intended "cget".
- (delete_line): Fix so it deletes the current line at the
- insertion cursor.
-end-sanitize-gdbtk
-
-Fri May 17 13:31:04 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * sh-stub.c: New file, was config/sh/stub.c.
-
-start-sanitize-gdbtk
-Thu May 16 19:20:29 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (gdb_prompt): Set this early on.
- (create_command_window): Use gdb_prompt rather than "(gdb) ".
- (gdbtk_tcl_preloop): Proc executed just prior to Tk main loop.
- (tclsh): If an evaluation window already exists, just bring it
- to the front instead of trying to create another.
- * gdbtk.c (tk_command_loop): New function.
- (gdbtk_init): Call tk_command_loop rather than Tk_MainLoop.
-
-Thu May 16 16:16:35 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.tcl (evaluate_tcl_command, tclsh): New functions that
- implement a tcl evaluation window for gdbtk maintainers to use.
-
-Thu May 16 11:42:58 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.tcl (files_command): Correctly insert list of files into
- listbox widget.
-
- * gdbtk.tcl (files_command): listbox command no longer accepts
- -geometry.
-
-Wed May 15 16:04:09 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * gdbtk.tcl (create_command_window): If command window's buffer
- is disabled, don't execute any of the key bindings.
-end-sanitize-gdbtk
-
-Wed May 15 08:25:12 1996 Jeffrey A Law (law@cygnus.com)
-
- * top.c (read_next_line): Fix thinkos. From Donn Seeley.
-
- * coffread.c (coff_symtab_read): Handle C_LABEL symbols like
- C_STAT symbols.
- * h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly.
- Flush cached frames just before exiting.
- * remote-sim.c (gdbsim_resume): Complain if the program isn't
- being run.
- * config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define.
-
-Tue May 14 18:05:16 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * procfs.c (procfs_thread_alive procfs_stop): Make static.
- (procfs_pid_to_str): New routine to print out thread id's in an
- intelligible manner.
- * sol-thread.c (sol_thread_fetch_registers): Re-order manner in
- which supply_register is called to fix bug with writing
- individual regs.
- * config/sparc/tm-sun4sol2.h: Define default for
- target_pid_to_str in case host lacks libthread_db.
-
-Mon May 13 23:53:30 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in config.in configure configure.in
- config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
- config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
- and pthread support, since pre-2.5 systems don't come with
- libthread_db.so.1.
-
- * procfs.c (info_proc): Use int instead of id_t. Old versions of
- Irix don't seem to define this.
-
-start-sanitize-gdbtk
-Mon May 13 13:43:25 1996 Fred Fish <fnf@cygnus.com>
-
- * gdbtk.c (tk_command): Catch case where no argument is given
- since this will cause the tcl interpreter to dump core.
-end-sanitize-gdbtk
-
-Mon May 13 17:40:58 1996 Jeffrey A Law (law@cygnus.com)
-
- * top.c (execute_control_command, case while_control): Allow
- a while command to be interrupted.
-
-Mon May 13 16:17:36 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * sol-thread.c: More cleanup, add comments.
- (sol_thread_resume): Prevent people from trying to step
- inactive threads.
- (sol_thread_wait sol_thread_fetch_registers
- sol_thread_store_registers): Remove unnecessary check for
- sol_thread_active. These routines won't get called unless threads
- are active.
-
-Mon May 13 11:29:37 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- SH3-E support from Allan Tajii <atajii@hmsi.com>:
- * sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for
- float registers.
- (sh3e_reg_names): New register name array.
- (sh_processor_type_table): Add sh3e processor type.
- * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test.
- (REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for
- full set of registers.
- * remote-e7000.c (want_sh3, want_sh3_nopc): New globals.
- (e7000_fetch_registers, e7000_wait): Use them.
- * sh3-rom.c (sh3_regnames): Add float registers.
- (sh3e_cmds, sh3e_ops): New globals.
- (sh3e_open): New function.
- (_initialize_sh3_rom): Rename from _initialize_sh3, set up
- sh3e target vector.
-
-Fri May 10 15:53:38 1996 Stu Grossman (grossman@lisa.cygnus.com)
-
- * sol-thread.c: Cleanup. gcc -Wall fixes. Add prototypes.
- Print out messages instead of codes for thread_db errors. Make
- access macros for thread and lwp manipulation. Make cleanups to
- fixup inferior_pid in case of errors.
-
-Thu May 9 19:06:02 1996 Fred Fish <fnf@cygnus.com>
-
- * aclocal.m4: Remove unused definition of AC_C_CROSS.
- * configure.in: Add powerpcle-*-solaris* host and target config
- so April 30th change does not get lost next time configure is
- rebuilt.
-
-Thu May 9 14:13:08 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c,
- infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
- win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
- avoid conflict with Solaris /usr/include/thread.h.
-
-Thu May 9 12:33:32 1996 Rob Savoye <rob@chinadoll.cygnus.com>
-
- * abug-rom.c: Config file for the older style ABug monitor that
- runs on the mvme13x boards.
- * config/m68k/monitor.mt: Add abug support for m68k cross
- debugging.
-
-Wed May 8 20:33:24 1996 Fred Fish <fnf@cygnus.com>
-
- * infcmd.c (do_registers_info): Always print the raw floating
- point value's bytes in big endian order, so the the leftmost bit
- is the most significant.
- * breakpoint.c (clear_momentary_breakpoints): Remove dead code
- that is referenced nowhere else.
- (set_breakpoint): Ditto.
- (do_enable_breakpoint): Created from enable_once_breakpoint
- with a couple of changes.
- (enable_breakpoint): Call do_enable_breakpoint with an appropriate
- bpdisp enum value to set disposition of breakpoint.
- (enable_once_breakpoint): Ditto.
- (enable_delete_breakpoint): Ditto.
- * breakpoint.h (clear_momentary_breakpoints): Remove prototype.
- * symtab.c (find_pc_line): Improve comments.
-start-sanitize-gdbtk
- * gdbtk.c: Fix a couple of misspellings.
-end-sanitize-gdbtk
- * xcoffread.c: Ditto.
-
-Tue May 7 18:37:06 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * target.c (debug_to_xfer_memory): Insert line breaks when
- dumping the memory block.
-
-Mon May 6 13:52:52 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * fork-child.c (fork_inferior), inferior.h: init_trace_fun now
- returns a possibly modified pid.
- * inftarg.c (ptrace_him): Now returns pid;
- * m3-nat.c (m3_trace_him): Now returns pid;
- * infcmd.c (run_command): Minor cleanup.
- * infrun.c (wait_for_inferior): Add another check for one_stepped
- near where we read the pc to avoid erroneously setting
- random_signal for multi-threaded support.
- * procfs.c: Add support for Solaris LWPs. Remove def of
- LOSING_POLL. Many cleanups... Several workarounds for Solaris
- lossage. System call entry and exit are now handled by
- dynamically registered handlers.
- * (syscallname): Don't barf when handed an unknown syscall
- number.
- * (info_proc_syscalls): Ditto.
- * sol-thread.c: New file. Implements Solaris thread support.
- * symfile.c (symbol_file_add): Add call to target_new_objfile to
- notify target-dependent code about new symbol tables.
- * (clear_symtab_users): Call target_new_objfile to notify it of
- the removal of all symbol tables.
- * target.c (push_target): Make sure that to_close is non-zero
- before calling it.
- * target.h (target_new_objfile): Provide default.
- * config/alpha/nm-osf2.h: Define LOSING_POLL because this version
- of OSF can't hack using poll with /proc.
- * config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
- sol-thread-new-objfile.
- * config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
- add libthread_db.so.1 to NAT_CLIBS.
- * config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
- target_pid_to_str.
-
-Sat May 4 02:13:34 1996 N Srin Kumar <nsrin@wipinfo.soft.net>
-
- * procfs.c (remove_fd): Fix copy of fds to fill hole left after
- removal of the requested fd.
-
-Mon May 6 07:52:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * rs6000-tdep.c (_initialize_rs6000_tdep): Don't do XCOFF specific
- hooks under ELF.
-
- * config/powerpc/tm-ppc-eabi.h: Define ELF_OBJECT_FORMAT.
-
-start-sanitize-gdbtk
-Thu May 2 19:17:49 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * gdbtk.tcl (debug_interface): New global, use to aid debugging.
- (insert_breakpoint_tag, delete_breakpoint_tag): Fix range.
- (file_popup_menu): Delete, never used.
- (listing_window_popup): Rename from listing_window_button_1,
- remove breakpoint toggling code.
- (toggle_breakpoint): New procedure.
- (create_file_win): Bind popup menu to button 2, toggle breakpoints
- with button 1 in breakpoint area, add display of tagged areas if
- debugging on.
-end-sanitize-gdbtk
-
-Thu May 2 12:46:14 1996 Jeffrey A Law (law@cygnus.com)
-
- From Peter Schauer:
- * breakpoint.h (enum bpdisp): Add del_at_next_stop.
- * breakpoint.c (insert_breakpoints, watchpoint_check,
- bpstat_stop_status): Avoid bad references to memory freed via
- delete_breakpoint on watchpoints going out of scope.
- Do not delete these watchpoints, disable them and change their
- disposition to del_at_next_stop instead.
- (breakpoint_auto_delete): Delete all breakpoints whose disposition
- is del_at_next_stop.
- (breakpoint_init_inferior): Use switch to avoid reference to
- already deleted breakpoint.
-
-Wed May 1 17:29:18 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (rs6000-nat.o): Depend on xcoffsolib.h.
- * config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
- * config/rs6000/rs6000.mt (TDEPFILES): ... to here.
- * xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
- (solib_info): Call xcoff_relocate_symtab via the hook.
- (sharedlibrary_command): Ditto.
- * xcoffread.c: Remove all FAKING_RS6000 comments and defines.
- (xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
- (xcoff_init_loadinfo_hook): Define and initialize here.
- (scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
- (xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
- * xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
- * rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
- of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
- * rs6000-nat.c (_initialize_core_rs6000): Add initialization
- of xcoff_relocate_symtab_hook.
-
-Tue Apr 30 13:22:02 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure (powerpcle-*-solaris*): Add Solaris support.
-
- * config/powerpc/{solaris.m[ht],tm-solaris.h}: New files for
- Solaris support.
-
-Mon Apr 29 16:17:31 1996 Dawn Perchik <dawn@cygnus.com>
-
- * c-valprint.c (c_val_print): Fix printing for arrays defined
- with 0 length.
-
-Sun Apr 28 15:08:05 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- Support for bi-endian remote breakpoints.
- * remote.c (big_break_insn, little_break_insn): New globals.
- (break_insn): Remove.
- (remote_insert_breakpoint, remote_remove_breakpoint): Use own
- code if REMOTE_BREAKPOINT defined, otherwise call memory
- breakpoint functions.
- * config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove.
- (BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define.
-
- * mon960-rom.c (mon960_cmds): Remove forward decl.
- (mon960_load): Use current_monitor instead of mon960_cmds.
- (mon960_regnames): Remove backslashes from line ends.
- (_initialize_mon960): Fix documentation string.
-
-Sun Apr 28 12:10:35 1996 Fred Fish <fnf@cygnus.com>
-
- * symfile.h (psymbol_allocation_list): Expand comments which
- describe the psymbol allocation list and how each field is
- used.
-
-Sun Apr 28 03:44:30 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * breakpoint.c (delete_breakpoint): Fix bpt->val, bpt->exp
- storage leaks.
- (breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks.
-
- * infcmd.c (run_command), solib.c (locate_base): Check for
- target_has_execution in addition to inferior_pid, a core file
- from a threaded program is yielding a non-zero inferior_pid.
-
- * sparc-tdep.c (get_saved_register): Handle window registers
- in a dummy frame correctly.
-
-Sat Apr 27 20:38:32 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (CLIBS): Move $(MMALLOC) past all other libs,
- so that anything that wants an allocation function not yet pulled
- in, will get it from mmalloc rather than a system library.
- * Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS,
- to avoid surprising results when used.
-
-Sat Apr 27 00:12:05 1996 Dawn Perchik (dawn@cygnus.com)
-
- * stabsread.c: Changes and bug fixes for cfront support.
- Fix bug for class data members.
- Fix parsing bug when no base classes exist.
- Fix memory bug - allocate space for cplusplus specific info.
- Add support for static data.
- Add prototypes for static functions.
- Enhance comments to show what each function expects to parse.
- Cleanup code.
- * stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename
- function to resolve_cfront_continuation.
-
-Fri Apr 26 23:58:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * infrun.c (wait_for_inferior): Call registers_changed when
- restarting the inferior to get over a nullified instruction.
-
-Tue Apr 24 12:12:55 1996 Dawn Perchik (dawn@cygnus.com)
-
- * dbxread.c,stabsread.c,gdbtypes.c,partial-stab.h,valops.c:
- Add new support for parsing cfront stabs.
-
-Wed Apr 24 00:32:55 1996 Jeffrey A Law (law@cygnus.com)
-
- * infrun.c (wait_for_inferior): Move "have_waited" label
- outside of #ifdef conditionals. Don't trash the wait status
- if we get a signal and the current instruction is nullified.
-
-Mon Apr 22 20:17:01 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (VERSION): Bump version number to 4.16.1.
- * NEWS: Update for 4.16 release.
-
-Mon Apr 22 16:32:29 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.h: Clean up comment formatting.
- (current_monitor): Remove decl.
- (LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions.
- (push_monitor, SREC_SIZE): Remove.
- * monitor.c: Expand old macro into current_monitor derefs
- everywhere.
- * remote-os9k.c (current_monitor): Remove definition.
-
-Mon Apr 22 14:54:45 1996 Mark Alexander <marka@superball.cygnus.com>
-
- * corefile.c (specify_exec_file_hook): Allow arbitrary number of
- hooks.
- (call_extra_exec_file_hooks): New function.
- * h8300-tdep.c: Lint; add .h files to provide missing declarations,
- remove unused variables.
- (set_machine_hook): New function.
- (_initialize_h8300m): Initialize it.
-
-Fri Apr 19 15:03:49 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * remote-mips.c (encoding): Don't specify size, to avoid bug in
- SunOS native compiler.
-
-Thu Apr 18 18:46:57 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.c: Use int rather than LONGEST for values, since
- the formatting strings are not prepared to accept long longs.
-
-Wed Apr 17 20:17:27 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * arm-tdep.c (initialize_arm_tdep): Make apcs32 a `zinteger'.
-
-Tue Apr 16 17:38:23 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * corelow.c (add_to_thread_list): Make sure reg_sect is non-null
- before de-referencing it. Prevents deref of NULL pointer if core
- file lacks .reg section.
- * defs.h: Rename floatformat_{to from}_long_double to
- floatformat_{to from}_doublest. Get rid of FLOATFORMAT_{TO
- FROM}... macros.
- * findvar.c (extract_floating store_floating): Change all refs to
- FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest.
- * utils.c: Change floatformat_{to from}_long_double to
- floatformat_{to from}_doublest cuz the new routines will use
- whatever size (double or long double) is appropriate.
- * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
- REGISTER_CONVERT_TO_RAW): Change FLOATFORMAT... macros to
- floatformat... routine calls.
-
-Mon Apr 15 16:34:11 1996 Per Bothner <bothner@kalessin.cygnus.com>
-
- * stabsread.c (read_type): Move handling of '@' from type
- number handling to handling of types proper (as emitted by gcc!).
- For typedefs, allocate the typedef type before reading its
- definition, to properly handling recursive types.
-
-Mon Apr 15 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * ch-exp.c (calculate_array_length): Fix prototype.
-
-Sat Apr 13 14:21:16 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * remote-nindy.c (nindy_open): Acquire more target state so that
- user can attach to a previously running program.
- * (nindy_fetch_registers nindy_store_registers): Get rid of fp
- conversion code. That's all handled in {extract store}_floating
- now.
- * utils.c (floatformat_to_double): Don't bias exponent when
- handling zero's, denorms or NaNs.
- * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
- REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and
- FLOATFORMAT_TO/FROM_DOUBLEST macros.
- * config/i960/tm-nindy960.h: Undefine
- REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and
- REGISTER_CONVERTIBLE. These are no longer necessary now that all
- the magic happens in extract/store_floating.
-
-Sat Apr 13 02:58:02 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * eval.c (evaluate_subexp_standard): Report error when attempting to
- evaluate subscripts for types which cannot be subscripted.
-
- * valarith.c (value_x_binop, value_x_unop): Add noside parameter.
- Return a zero value with the return type of the member function
- if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member
- function.
- * values.h (value_x_binop, value_x_unop): Update prototypes
- accordingly.
- * eval.c (evaluate_subexp_standard): Update all callers of
- value_x_binop, value_x_unop accordingly.
-
- * valarith.c (value_neg, value_complement): Perform ANSI C/C++
- integral promotion on operands.
-
-Fri Apr 12 13:19:27 1996 Fred Fish <fnf@cygnus.com>
-
- * README: Update for 4.16 release.
- * configure.in (AC_CHECK_FUNCS): Also check for sbrk.
- * configure: Regenerate with autoconf.
- * config.in: Regenerate with autoheader.
- * main.c (main): Only use sbrk() when HAVE_SBRK is defined.
- * top.c (command_loop): Ditto.
-
-Fri Apr 12 09:45:29 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * defs.h: Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
- defaults for bi-endian targets. Replace function pointers for
- floatformat routines with macros. No need for these to be runtime
- selectable.
- * findvar.c: Get rid of floatformat function pointers. Use
- macros in extract_floating and store_floating.
- * remote-nindy.c (nindy_fetch_registers nindy_store_registers):
- Use floatformat macros.
-
-Thu Apr 11 21:28:02 1996 Fred Fish <fnf@cygnus.com>
-
- From: Miles Bader <miles@gnu.ai.mit.edu>
- * configure.in (AC_CHECK_HEADERS): check for endian.h.
- Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK.
- Add host & target cases for i[345]86-*-gnu*.
- * config.in: Regenerate with autoheader.
- * configure: Regenerate with autoconf.
- * Makefile.in (AR, AWK): Set from corresponding autoconf substs.
- (init.c): Don't scan mig-generated files.
- * defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
- * config/nm-m3.h (ATTACH_NO_WAIT): Define.
- * infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
- rather than "#ifndef MACH".
-
-Thu Apr 11 18:49:42 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote.c (remotewritesize): New GDB variable, controls size
- of memory packets sent to the target.
-
-Thu Apr 11 13:47:52 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * dcache.c: Add prototypes. Make many functions static.
- * (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and
- dcache_poke call dcache_xfer_memory directly in order to fix
- problems with turning off dcache. dcache_peek is now unnecessary,
- so it goes away.
-
- * defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
- and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer
- to a struct floatformat. This allows for better handling of
- targets whose floating point formats differ from the host by more
- than just byte order.
- * (floatformat_to_long_double floatformat_from_long_double):
- Prototypes for new functions in utils.c.
- * (floatformat_to_doublest floatformat_from_doublest): Prototypes
- for pointers to floating point conversion functions. The actual
- function uses either double or long double if the host supports it.
- * findvar.c (floatformat_to_doublest floatformat_from_doublest):
- Initialize to point at correct function depending on HAVE_LONG_DOUBLE.
- * (extract_floating store_floating): Rewrite. Now, if host fp
- format is the same as the target, we just do a copy. Otherwise,
- we call floatformat_{to from}_doublest.
- * remote-nindy.c (nindy_xfer_inferior_memory): Change param
- `write' to `should_write'.
- * utils.c (floatformat_to_long_double
- floatformat_from_long_double): New routines that implement long
- double versions of functions in libiberty/floatformat.c.
- * config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for
- i960 extended real (80 bit) numbers.
- * nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes
- actually read or written.
-
-Wed Apr 10 02:56:06 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-valprint.c (chill_val_print): Remove call to calculate_array_length.
- (calculate_array_length): Move function from here ...
-
- * ch-exp.c (calculate_array_length): ... to here.
- (parse_primval): If we have a symbol with an array type
- and the length is 0, call calculate_array_length.
-
-Tue Apr 9 01:23:05 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET:
- Add some checks for powerset compatibility.
-
- * valops.c (value_slice): Use lowbound instead of lowerbound for
- call to slice_range_type to get correct bounds.
-
-Mon Apr 8 12:53:56 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and
- dependencies.
- * scm-lang.c (gdb_string.h): Include.
- * objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow
- call to correct type (char *).
- * cp-valprint.c (cp_print_static_field): Ditto.
- * somsolib.c (som_solib_create_inferior_hook): Add a declaration
- for external find_unwind_entry function (from hppa-tdep.c).
- * remote-pa.c (remote_write_bytes, remote_read_bytes): Change
- type of second arg to "char *" to be type compatible with
- dcache.
- (remote_wait): Cast second arg to strtol to correct type.
- * hppa-tdep.c (compare_unwind_entries): Change argument types to
- "const void *" to be type compatible with qsort, and then
- assign to local args prior to use.
-
-Mon Apr 8 15:35:52 1996 Jeffrey A Law (law@cygnus.com)
-
- * infptrace.c (kill_inferior): Remove call to "kill"; update
- comments.
-
-Mon Apr 8 14:05:07 1996 Geoffrey Noer <noer@cygnus.com>
-
- * remote-e7000.c: don't append :23 to target port if __WIN32__
- is defined (it's WinGDB).
-
-Sun Apr 7 22:34:29 1996 Fred Fish <fnf@cygnus.com>
-
- From: Miles Bader <miles@gnu.ai.mit.edu>
- * gnu-nat.c, gnu-nat.h, msg.defs, exc_request.defs, i386gnu-nat.c,
- msg_reply.defs, notify.defs, process_reply.defs, reply_mig_hack.awk,
- config/nm-gnu.h, config/i386/{i386gnu.mh, i386gnu.mt, nm-gnu.h,
- m-i386gnu.h, xm-i386gnu.h}: New files for GNU hurd.
-
-Sun Apr 7 13:32:41 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in (case host): Add i386sco5 host.
- * configure: Regenerate.
-
- From: Robert Lipe <robertl@dgii.com>
- Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
- target is an SVR3.2 with COFF, ELF, and shared libes, but
- no /proc.
- * config/i386/i386sco5.mh: New file.
- * config/i386/nm-i386sco5.h: New file.
-
-Sat Apr 6 08:55:22 1996 Fred Fish <fnf@cygnus.com>
-
- * bcache.c (bcache): When size of chunk to cache is exactly equal to
- BCACHE_MAXLENGTH, stash chunk as unique copy.
-
-Sat Apr 6 00:46:26 1996 Fred Fish <fnf@cygnus.com>
-
- * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef.
- (add_psymbol_to_list): Add an arg for passing CORE_ADDR values and
- use it, rather than calling add_psymbol_addr_to_list.
- (add_psymbol_addr_to_list): Delete.
- (add_psymbol_to_list): Make psymbol static to avoid random data in
- gaps due to alignment of structure members.
- * symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST,
- ADD_PSYMBOL_ADDR_TO_LIST): Remove. Real world tests show no
- performance improvements by inlining via complicated macros and
- they just make gdb larger and harder to maintain.
- * dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST
- and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to
- add_psymbol_to_list with appropriate long or CORE_ADDR args.
- (add_partial_symbol): Ditto.
- * partial-stab.h: Ditto.
- * os9kread.c (read_os9k_psymtab): Ditto
- * mdebugread.c (parse_partial_symbols): Ditto.
- (handle_psymbol_enumerators): Ditto.
- (demangle.h): Include.
- * hpread.c (hpread_build_psymtabs): Ditto.
- (hpread_build_psymtabs): Ditto.
- (demangle.h): Include
-
-start-sanitize-gdbtk
-Fri Apr 5 13:44:40 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * gdbtk.c (running_now): New global variable.
- (gdb_cmd): Test it before executing any command.
- (gdbtk_call_command): Set it when inferior is running.
- * gdbtk.tcl (gdbtk_tcl_busy, gdbtk_tcl_idle): Enable and
- disable interaction with command window's text appropriately.
-
-Fri Apr 5 13:25:42 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * gdbtk.c (SIOCSPGRP, linux): If on Linux, undef SIOCSPGRP, since
- some versions of the kernel don't support it.
-end-sanitize-gdbtk
-
-Thu Apr 4 20:16:55 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in: Check for setpgid function.
- * config.in: Regenerate with autoheader.
- * configure: Regenerate with autoconf.
- * inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
- if it is actually defined.
- (gdb_setpgid): Use HAVE_SETPGID.
- * ch-exp.c: Change include of <string.h> to "gdb_string.h".
- * c-exp.y, f-exp.y, m2-exp.y: Ditto.
- * c-exp.y, serial.c: Include <ctype.h>.
- * config/m68k/nm-news.h: Add typedef for pid_t which is
- apparently missing from <sys/types.h>. Enclose entire
- file in NM_NEWS_H ifndef and define when included.
- * config/mips/nm-news-mips.h: Ditto.
- * config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
- REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
-
-Thu Apr 4 19:04:18 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * arm-xdep.c: Move native-specific code to here from arm-tdep.c.
- * arm-tdep.c (arm_apcs_32): New global.
- (arm_addr_bits_remove, arm_saved_pc_after_call,
- arm_push_dummy_frame, arm_pop_frame): New functions.
- (arm_skip_prologue): Updated version from Richard Earnshaw.
- (_initialize_arm_tdep): Add set/show "apcs32".
- * config/arm/tm-arm.h (ADDR_BITS_REMOVE): Call
- arm_addr_bits_remove.
- (SAVED_PC_AFTER_CALL): Call arm_saved_pc_after_call.
- (frame_find_saved_regs): Declare properly.
- (PUSH_DUMMY_FRAME): Call arm_push_dummy_frame.
- (POP_FRAME): Call arm_pop_frame, use ADDR_BITS_REMOVE instead of
- explicit mask.
- * config/arm/nm-arm.h: New file.
- * config/arm/xm-arm.h (KERNEL_U_ADDR, FETCH_INFERIOR_REGISTERS):
- Move definitions to nm-arm.h.
- * config/arm/arm.mh (NAT_FILE): Define.
-
- * symfile.c (generic_load): Initialize data_count properly.
-
-Thu Apr 4 17:17:53 1996 Fred Fish <fnf@cygnus.com>
-
- * symmisc.c (print_objfile_statistics): Print memory used by
- psymbol cache obstack.
-
-Thu Apr 4 15:43:07 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * symfile.c (report_transfer_performance): New function.
- (generic_load): Call it to report transfer rate.
- * remote-e7000.c (e7000_load): Ditto.
-
-Mon Apr 1 16:31:00 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Change references to config.h to be in objdir,
- edit out rules to rebuild config.h.
-
-Mon Apr 1 08:32:23 1996 Fred Fish <fnf@cygnus.com>
-
- * hppa-tdep.c (hppa_pop_frame): Call clear_proceed_status before
- proceeding.
-
-Sun Mar 31 16:15:43 1996 Fred Fish <fnf@cygnus.com>
-
- * hppah-nat.c (store_inferior_registers, store_inferior_registers,
- fetch_register, child_xfer_memory): Use call_ptrace function supplied
- by infptrace.c rather than calling ptrace directly.
-
-Sun Mar 31 15:39:00 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mon960-rom.c: Cleanups and elimination of unused code,
- clarify documentation string.
- (mon960_serial, mon960_ttyname): Remove.
- * config/i960/tm-mon960.h (ADDITIONAL_OPTIONS,
- ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP): Remove.
-
-Sat Mar 30 11:00:22 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in: Check whether printf family supports printing
- long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so.
- * acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE.
- * configure: Regenerate.
- * valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE.
- * c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE.
- * configure.in: Fix have_gregset and have_fpregset autoconf
- variable names so that they match the pattern required to
- cache them.
-
-Fri Mar 29 21:39:56 1996 Fred Fish <fnf@cygnus.com>
-
- * core-aout.c (fetch_core_registers): Cast core_reg_size to int
- before testing against reg_ptr.
- * eval.c (evaluate_subexp_standard): Cast type of
- TYPE_FN_FIELD_VOFFSET to int.
- * findvar.c (extract_signed_integer, extract_unsigned_integer,
- extract_long_unsigned_integer): Cast type of sizeof to int.
- * values.c (unpack_field_as_long, modify_field): Ditto.
- * valops.c (value_assign, call_function_by_hand): Ditto.
- * infcmd.c (do_registers_info): Ditto.
- * ser-tcp.c (tcp_open): Ditto.
- * remote.c (putpkt): Ditto.
- * dcache.c (dcache_peek): Ditto.
- * dcache.c (dcache_poke): Ditto.
- * m2-exp.y (yylex): Ditto.
- * gnu-regex.c (re_match_2): Ditto.
- * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef
- out unused macro definition and variables.
- * inftarg.c (proc_wait): Move from main.c to here, and make static.
- * valprint.c (val_print_string): Change bufsize from int to unsigned.
- * main.c (wait.h): Include.
- * top.c (command_line_input): Remove unused variable "c".
- * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum
- value TYPE_CODE_TYPEDEF to switch statement.
- (f_type_print_varspec_suffix): Add missing enum value
- TYPE_CODE_TYPEDEF to switch statement.
- * ch-exp.c (parse_primval): Add remaining enumeration values to
- switch statement, with no specific action.
- (ch_lex): Add LOC_UNRESOLVED in switch statement.
- (pushback_token): Ifdef out, since code using it is ifdef'd out.
- * stabsread.c (cleanup_undefined_types): Remove unused label
- "badtype".
- * objfiles.h (print_symbol_bcache_statistics): Add prototype.
- * maint.c (objfiles.h): Include.
- (maintenance_print_statistics): Remove unused variable "temp".
- * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove
- unused variable "found_file_symbol".
- * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch.
- * language.c (lang_bool_type): Use existing function local type
- variable rather than create block local variables.
- * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS.
- * infptrace.c (wait.h, command.h): Include.
- * ser-tcp.c (gdb_string.h): Include
- * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR.
- (i386_get_frame_setup): Change "pc" from int to CORE_ADDR.
- * command.c (complete_on_enum): Make assignment used as truth value
- explictly check against NULL.
- (wait.h): Include.
- * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code
- that uses it is ifdef'd out.
- * parser-defs.h: Add prototype for write_dollar_variable.
- * infrun.c: Add prototype for write_pc_pid.
- * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs.
- * symmisc.c (bcache.h): Include.
- * bcache.h: Add prototype for print_bcache_statistics.
- * symfile.c: Include <time.h>.
- * printcmd.c (print_scalar_formatted): Change len to unsigned int.
- * valarith.c (value_equal): Cast result of TYPE_LENGTH to int.
- * valarith.c (value_binop): Change result_len, promoted_len1,
- and promoted_len2 to unsigned int.
- * valarith.c (value_subscripted_rvalue): Change elt_offs and
- elt_size to unsigned int.
- * valops.c (value_array): Change typelength to unsigned int.
- (destructor_name_p): Change len to unsigned int.
- * scm-lang.h (scm_parse): Add prototype for scm_unpack.
- * symfile.c (decrement_reading_symtab): Change return type to void.
- * valarith.c (value_subscript): Remove unused variable "word".
- (value_subscript): Remove unused variable "tint".
- * valops.c (auto_abandon): Ifdef out, since code using it is also
- ifdef'd out.
- * eval.c (init_array_element): Remove unused variable "val".
- * Makefile.in (values.o): Depends on scm-lang.h.
- (command.o): Depends upon wait_h.
- (ser-tcp.o): Depends upon gdb_string.h.
- (infptrace.o): Depends upon wait_h and command_h.
- (maint.o): Depends on objfiles.h and symfile.h.
- * values.c (allocate_repeat_value): Remove unused variable
- "element_type".
- (scm-lang.h): Include.
- * breakpoint.c (create_longjmp_breakpoint): Enclose in
- GET_LONGJMP_TARGET define, unused otherwise.
- * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint,
- i386_remove_watchpoint and i386_stopped_by_watchpoint.
-
-Thu Mar 28 12:53:19 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * configure.in (sparc64-*-solaris2*): Delete.
- Stick with sparc-*-solaris2*.
- * configure: Regenerated.
-
-Thu Mar 28 06:51:26 1996 Fred Fish <fnf@cygnus.com>
-
- * valops.c (value_assign): Make copy of internal variable value
- before returning it as a new value, since it is owned by the
- internal variable and will be freed along with it.
-
-Wed Mar 27 08:36:17 1996 Jeffrey A Law (law@cygnus.com)
-
- * From Peter Schauer.
- * breakpoint.c (breakpoint_re_set_one): Keep temporary
- breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy
- and bp_step_resume in case breakpoint_re_set_one is called due
- to a step over a dlopen call.
- * infrun.c (wait_for_inferior): Always remove breakpoints from
- inferior in BPSTAT_WHAT_CHECK_SHLIBS case.
-
-Tue Mar 26 13:15:32 1996 Fred Fish <fnf@cygnus.com>
-
- * config/mips/tm-mips.h (COERCE_FLOAT_TO_DOUBLE): Only prefer
- non-prototyped case over prototyped case for C.
- * config/pa/tm-hppa.h (COERCE_FLOAT_TO_DOUBLE): Ditto.
-
-Sat Mar 23 17:24:28 1996 Fred Fish <fnf@cygnus.com>
-
- * os9kread.c (os9k_process_one_symbol): Note nonportable
- assumption that an int can hold a char *.
-
- * bcache.h (struct hashlink): Wrap data[] inside union with
- double to force longest alignment.
- (BCACHE_DATA): New macro to access data[].
- (BCACHE_ALIGNMENT): New macro to get offset to data[].
- * bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get
- address of cached data. Use BCACHE_ALIGNMENT to compute
- amount of space to allocate for each hashlink struct.
-
-Sat Mar 23 12:14:02 1996 Fred Fish <fnf@cygnus.com>
-
- * ch-lang.c (evaluate_subexp_chill): Fix typo.
-
-Thu Mar 21 08:27:19 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (VERSION): Bump version to 4.15.3
-
-Thu Mar 21 10:56:41 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * config.in: Rename from config.h.in.
- * configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
- Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
- * configure: Rebuild.
- * Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
- Set CONFIG_HEADERS to config.h:config.in.
-
-Tue Mar 19 12:47:51 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * partial-stab.h (case N_ENDM): Finish current partial symbol
- table for Solaris 2 cc.
-
-Tue Mar 19 10:39:15 1996 Jeffrey A Law (law@cygnus.com)
-
- * rs6000-nat.c (exec_one_dummy_insn): Don't clobber the
- PC in the registers array. From Peter Schauer.
-
-Mon Mar 18 13:47:09 1996 Fred Fish <fnf@cygnus.com>
-
- * symfile.c (reread_symbols): Reinitialize bcache struct
- members to zero using memset. Also use memset to reinit
- global_psymbols and static_psymbols, rather than explicitly
- resetting each structure member.
-
-Sat Mar 16 19:47:36 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in: Add fragment to create stamp-h.
-
- From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
- * configure.in (AC_CHECK_HEADERS): Check for link.h.
- * configure: Regenerate with autoconf.
- * config.h.in: Regenerate with autoheader.
- * config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H
- is defined.
- * solib.c: Exclude most of the code if HAVE_LINK_H is not defined.
- * config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for
- older a.out based systems.
-
-Sat Mar 16 16:45:43 1996 Fred Fish <fnf@cygnus.com>
-
- * config.h.in: New file.
- * acconfig.h: New file, for autoheader.
- * configure.in (AC_CONFIG_HEADER): Add, generate config.h.
- * configure: Regenerate.
- * Makefile.in (defs_h): Add config.h
- (distclean): Remove config.h and stamp-h during distclean.
- (config.h, stamp-h): New targets to remake config.h when necessary.
- * defs.h (config.h): Include before any other includes or defines.
- * i386-tdep.c (gdb_string.h): Move include after include of defs.h.
- * i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H.
-
-Sat Mar 16 14:55:27 1996 Fred Fish <fnf@cygnus.com>
-
- From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
- * Makefile.in (INSTALLED_LIBS): Make sure that @LIBS@ will not
- result in an empty line, to work around a bug in native Ultrix 4.4
- and OSF/1-3.2C make.
-
-Sat Mar 16 13:33:17 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in: Add gdbserver to configdirs under linux.
- * configure: Regenerate.
-
-Fri Mar 15 12:06:58 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * config/i386/nm-nbsd.h (FLOAT_INFO): Comment out.
- * config/i386/tm-nbsd.h (NUM_REGS): Define.
-
-Thu Mar 14 10:31:18 1996 Jeffrey A Law (law@cygnus.com)
-
- * solib.c (solib_break_names): Add _r_debug_state for
- vanilla SVR4 implementations. From Peter Schauer.
-
-Mon Mar 11 14:24:57 1996 Dawn Perchik <dawn@critters.cygnus.com>
-
- * mon960-rom.c: New file; support mon960 rom monitor on i960.
- * monitor.c (monitor_debug): Change remotedebug to buffer strings.
- * monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
- epecting prompt and echo during open.
- * monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
- determine if break should be sent as stop command.
- * monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
- * i960-tdep.c (mon960_frame_chain_valid): New function for getting
- stack frame on mon960.
- * Makefile.in: Add mon960 files.
- * configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
- added i960-nindy-coff* and i960-nindy-elf* for target nindy.
- * configure: Regenerated.
- * config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
- support mon960 rom monitor on i960.
-
-Mon Mar 11 11:02:47 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- With Michael Snyder:
- * i386-tdep.c (skip_trampoline_code): Fix strncmp length.
- * win32-nat.c (CHECK, DEBUG*, debug_*): New.
- (handle_load_dll): Don't reload symbols.
- (handle_exception): Use the DEBUG_* names.
- (child_wait): Add DEBUG_* code.
- (_initialize_inftarg): Add new commands to set debug_ names.
-
-Mon Mar 11 09:19:58 1996 Jeffrey A Law (law@cygnus.com)
-
- * From Peter Schauer:
- * breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE.
- (bpstat_stop_status): Likewise.
- (remove_solib_event_breakpoints): Likewise.
- (clear_momentary_breakpoints): Likewise.
- (re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint
- if we still can't read the memory for that breakpoint.
- (mention): Add bp_shlib_event case to keep gcc quiet.
-
-Fri Mar 8 12:08:12 1996 Jeffrey A Law (law@cygnus.com)
-
- * breakpoint.h (enum enable): New enum shlib_disabled for
- shared library breakpoints that have been temporarily disabled.
- * breakpoint.c: Handle temporarily disabled shared library
- breakpoints like disabled breakpoints in most places.
- (insert_breakpoints): Use shlib_disabled to indicate
- that an unsettable breakpoint is only temporarily disabled.
- (re_enable_breakpoints_in_shlibs): New function.
- * corelow.c (solib_add_stub): After adding shared libraries,
- try to reenable any temporarily disabled breakpoints.
- * infcmd.c (attach_command): Likewise.
- * infrun.c (wait_for_inferior): Likewise.
-
-Fri Mar 8 11:41:25 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * defs.h (extract_long_unsigned_integer): Declare.
- * findvar.c (extract_long_unsigned_integer): New function.
- * printcmd.c (print_scalar_formatted): Use it.
- * valprint.c (val_print_type_code_int): Likewise.
-
-Thu Mar 7 17:40:50 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * infcmd.c (do_registers_info): Ignore anonymous registers.
- * sh-tdep.c (set processor): New command to set specific
- processor type.
- (sh_reg_names, sh3_reg_names): Arrays of register names for
- SH and SH3 processors.
- (sh_set_processor_type): New function.
- * sh3-rom.c (sh3_open): Call it.
- (sh3_regname): Add names of all the bank registers.
- (sh3_supply_register): Clean up formatting.
- * config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
- bank registers.
- (REGISTER_NAMES): Add names of bank registers.
- (FP15_REGNUM): Define.
- (REGISTER_VIRTUAL_TYPE): Use it.
- * monitor.c: Clean up some comments.
-
-Thu Mar 7 12:09:51 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * i386b-nat.c: Revert part of Mar 5 change. FreeBSD collapsed the
- s* and t* symbols too.
-
-Thu Mar 7 15:18:51 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * symfile.c (generic_load): Avoid division by zero.
-
-Wed Mar 6 17:57:59 1996 Jeffrey A Law (law@cygnus.com)
-
- * breakpoint.c (bfd_lookup_symbol): Provide for all SVR4 systems,
- not just those with HANDLE_SVR4_EXEC_EMULATORS.
-
- From Peter Schauer:
- * breakpoint.c (internal_breakpoint_number): Move to file scope.
- (create_solib_event_breakpoint): Use an internal breakpoint number.
-
-Wed Mar 6 00:32:44 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * valarith.c (value_in): Change builtin_type_chill_bool to
- LA_BOOL_TYPE.
-
-Tue Mar 5 23:48:36 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-exp.c (parse_primval): Handle CARD, MAX, MIN.
- (match_string_literal): Handle control sequence.
- (match_character_literal): Deto.
-
- * ch-lang.c (chill_printchar): Change formating of nonprintable
- characters from C'xx' to ^(num).
- (chill_printstr): Deto.
- (value_chill_card, value_chill_max_min): New functions to process
- Chill's CARD, MAX, MIN.
- (evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN.
-
- * expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN
- for Chill's CARD, MAX, MIN.
-
- * valarith.c (value_in): Add processing of TYPE_CODE_RANGE
- and change return type from builtin_type_int to
- builtin_type_chill_bool.
-
-Tue Mar 5 18:54:04 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/nm-nbsd.h (link_object, lo_name, etc): Move to here
- from config/nm-nbsd.h.
- * config/sparc/nm-nbsd.h (regs, fp_status, etc): Move to here
- from config/sparc/tm-nbsd.h.
-
- * config/m68k/nm-hp300hpux.h (FIVE_ARG_PTRACE): Define here
- instead of in config/m68k/xm-hp300hpux.h.
-
-Tue Mar 5 12:05:35 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide
- implementation for NetBSD systems.
-
-Mon Mar 4 23:44:16 1996 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valarith.c (binop_user_defined_p): Return 0 for BINOP_CONCAT.
- (value_concat): Handle varying strings (add COERCE_VARYING_ARRAY).
-
- * ch-lang.c (evaluate_subexp_chill case MULTI_SUBSCRIPT): Error
- if "function" is pointer to non-function.
-
-Mon Mar 4 17:47:03 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * top.c (print_gdb_version): Update copyright year.
-
-Mon Mar 4 14:44:54 1996 Jeffrey A Law (law@cygnus.com)
-
- From Peter Schauer:
- * infrun.c (wait_for_inferior): Remove breakpoints and
- switch terminal settings before calling SOLIB_ADD.
- * solib.c (enable_break, SVR4 variant): Don't map in symbols
- for the dynamic linker, the namespace pollution causes real
- problems.
-
-Sun Mar 3 17:18:57 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * remote-mips.c (common_breakpoint): Explicitly terminate the
- returned buffer.
-
-Wed Feb 28 22:32:18 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
- * remote.c (remote_detach): Send a command 'D' to the target
- when detaching, update the function's comments.
-
-Thu Jun 6 16:11:38 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (thread_cmd_list): New declaration.
- (parse_int_arg): New function.
-
-Wed Jun 5 17:28:04 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.h (struct proc): Add DETACH_SC field.
- * gnu-nat.c (make_proc): Set DETACH_SC.
- (struct inf): Add DETACH_SC & DEFAULT_THREAD_DETACH_SC fields.
- (make_inf): Set DETACH_SC & DEFAULT_THREAD_DETACH_SC fields.
- (add_thread_commands): Add set/show for detach-suspend-count.
- Add takeover-suspend-count cmd.
- (inf_detach): Set suspend counts to the detach SC, not 0.
- (set_thread_detach_sc_cmd, show_thread_detach_sc_cmd,
- set_task_detach_sc_cmd, show_task_detach_sc_cmd,
- set_thread_default_thread_detach_sc_cmd,
- show_thread_default_thread_detach_sc_cmd): New functions.
- (show_task_cmd): Also show detach-suspend-count values.
- (thread_takeover_sc_cmd): New function.
-
-Fri May 31 16:49:24 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (show_thread_run_cmd): Actually print state.
-
-Thu May 30 10:47:56 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_signal): Make unforwardable exceptions an error.
-
-Tue May 28 17:06:36 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_validate_stopped): proc_getprocinfo takes a
- pointer to the flags now, not the flags themselves.
-
-Mon May 27 13:31:17 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (gnu_wait): Print debugging msgs for pending execs.
- (gnu_create_inferior): Check return from ptrace.
-
-Sun May 26 16:56:35 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.h (struct proc): Add DEAD field.
- * gnu-nat.c (make_proc): Initialize DEAD.
- (inf_set_traced, inf_validate_task_sc, inf_validate_procs: Frob it.
- (gnu_wait): Only abort for 0 threads if the task isn't dead.
-
-Sat May 25 17:06:05 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_signal): Pass SIGCODE when posting a signal.
-
-Wed May 22 18:44:28 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (S_proc_wait_reply): Add SIGCODE argument.
- (inf_set_traced): Only give no-signal-thread error message if
- turning *on* tracing.
-
-Wed May 15 13:03:16 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_validate_procs): If INF has no threads, always
- set inf->threads_up_to_date to 0.
- (inf_signal): Pass in new SIGCODE argument to msg_sig_post_untraced.
- (gnu_wait): Pass in new TIMEOUT arg to interrupt_operation.
- (proc_update_sc): Cast thread state arg to thread_set_state.
- (proc_get_state): Cast thread state arg to thread_get_state.
- (inf_validate_task_sc): Cast task_basic_info arg to task_info.
- * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Call
- inf_update_procs before we lookup the thread.
- * config/i386/i386gnu.mh (MH_CFLAGS): New variable.
-
-Tue May 7 17:52:33 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (gnu_kill_inferior): Use inf_set_task to clear the task.
-
-Mon May 6 19:06:49 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_set_traced): Use msg_set_init_int with
- INIT_TRACEMASK instead of setting the exec flags.
-
-Fri May 3 19:10:57 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (inf_validate_procs): Don't clear INF->task if we find
- the task's died, so others have a chance at it.
- (gnu_resume): When single-stepping a single thread, given an error
- if there is no such thread. When single-stepping one but running
- the others, just given a warning and still run all the threads.
- (gnu_wait): If there seem to be no threads, look harder, and
- signal an error if there really aren't any.
- (gnu_attach): Reset thread numbering to 0.
-
- * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Give
- thread name in warning messages.
-
- * gnu-nat.c (active_inf): New function.
- (show_sig_thread_cmd, show_stopped_cmd): Use it.
- (info_port_rights, info_send_rights_cmd, info_port_sets_cmd,
- info_recv_rights_cmd, info_port_rights_cmd, info_port_rights_cmd):
- New functions.
- (add_task_commands): Add new port-right info commands.
-
-Fri Apr 26 20:42:16 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (gnu_wait): Instead of _hurd_intr_rpc_mach_msg, just
- use mach_msg with MACH_RCV_INTERRUPT.
- (set_noninvasive_cmd): New function.
- (add_task_commands): Add command entry for `set noninvasive'.
-
-Mon Mar 4 14:12:02 1996 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (gnu_read_inferior): Use hurd_safe_memmove, not safe_bcopy.
- (safe_bcopy): Function removed.
-
-Mon Dec 4 14:18:26 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c (proc_update_sc): Assert only threads can have state.
- (make_proc): Initialize state_valid & state_changed fields.
-
-Tue Nov 28 17:51:21 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * reply_mig_hack.awk: New file.
-
-Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * breakpoint.c (breakpoint_1): Print breakpoint thread field.
-
- * lynx-nat.c (child_wait): Return TARGET_WAITKIND_SPURIOUS for new
- threads.
-
-Mon Nov 13 18:30:53 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * target.c (debug_to_check_threads): New function.
-
- * inflow.c (terminal_init_inferior_with_pgrp): New function.
- (terminal_init_inferior): Call terminal_init_inferior_with_pgrp.
- * inferior.h (terminal_init_inferior_with_pgrp): New declaration,
- but only if PROCESS_GROUP_TYPE is defined.
-
-Mon Nov 6 16:42:09 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * target.c (debug_to_thread_alive): Pass through the return value.
-
-Thu Nov 2 18:05:00 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * target.c (signals, target_signal_from_host, target_signal_to_host):
- Add mach exceptions.
- * target.h (enum target_signal): Add mach exceptions.
-
-Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
-
- * gnu-nat.c: New file: gnu native backend.
- * i386gnu-nat.c: New file: i386-specific part of gnu native backend.
- * gnu-nat.h: New file.
- * config/nm-gnu.h: New file.
- * config/tm-i386gnu.h: New file.
- * config/xm-i386gnu.h: New file.
- * config/i386/i386gnu.mh: New file.
- * config/i386/i386gnu.mt: New file.
-
-Wed Feb 28 15:50:12 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (VERSION): Bump version to 4.15.2 to establish
- baseline for gdb 4.16 rerelease testing.
-
-Wed Feb 28 13:32:05 1996 Jeffrey A Law (law@cygnus.com)
-
- * somsolib.c (som_solib_create_inferior_hook): Before returning
- call clear_symtab_users.
-
-Tue Feb 27 00:04:46 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * remote-e7000.c (e7000_open): Delete all breakpoints when
- connecting to e7000. Change connect message to allow use of
- monitor.exp in test suite.
- * (e7000_load): Print transfer rate of download.
- * symfile.c (generic_load): Print transfer rate of download.
-
-Sun Feb 25 13:58:33 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.in (mips*-*-vxworks*): New config.
- * configure: Regenerated.
-
- * config/mips/vxmips.mt, config/mips/tm-vxmips.h: New files.
- * remote-vxmips.c (vx_convert_to_virtual, vx_convert_from_virtual):
- Remove, never used.
-
-Sat Feb 24 12:30:28 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * partial-stab.h (case N_FUN): Function symbols generated
- by SPARCworks cc have a meaningless zero value, do not update
- pst->textlow if the function symbol value is zero.
-
- * stabsread.c (define_symbol): Initialize SYMBOL_TYPE field
- for function prototype declaration symbols.
-
-Fri Feb 23 22:33:04 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * remote-e7000.c (e7000_load): New routine to download via the
- network.
- * (e7000_wait): Don't backup PC when we hit a breakpoint.
- Apparantly new sh2 pods get this right...
- * (e7000_ops): Add call to e7000_load.
-
-Thu Feb 22 00:52:42 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * config/m68k/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h},
- m68knbsd-nat.c: New files, support for NetBSD/m68k.
-
- * configure.in (m68k-*-netbsd*): New config.
- * configure: Regenerated.
-
-Wed Feb 21 19:00:21 1996 Fred Fish <fnf@cygnus.com>
-
- * standalone.c (open, _initialize_standalone): Fix obvious typos
- reported by Martin Pool <martin@citr.uq.oz.au>.
-
-Wed Feb 21 14:24:04 1996 Jeffrey A Law (law@cygnus.com)
-
- * solib.c (solib_create_inferior_hook): Fix thinko.
-
-Tue Feb 20 23:59:19 1996 Jeffrey A Law (law@cygnus.com)
-
- * solib.c (solib_break_names): Define for Solaris and Linux.
- (enable_break): For SVR4 systems, first try to use the debugger
- interfaces in the dynamic linker to track shared library events
- as they happen, then fall back to BKPT_AT_SYMBOL code. Convert
- BKPT_AT_SYMBOL code to use shared library event breakpoints.
- (solib_create_inferior_hook): Simplify BKPT_AT_SYMBOL code,
- it no longer needs to restart/wait on the inferior.
- * symfile.c (find_lowest_section): No longer static.
- * symfile.h (find_lowest_section): Corresponding changes.
-
-Tue Feb 20 18:54:08 1996 Fred Fish <fnf@cygnus.com>
-
- * valops.c (COERCE_FLOAT_TO_DOUBLE): Define default value.
- (value_arg_coerce): Use COERCE_FLOAT_TO_DOUBLE.
- * config/alpha/tm-alpha.h (COERCE_FLOAT_TO_DOUBLE): Define to 1.
- * config/mips/tm-mips.h: Ditto.
- * config/pa/tm-hppa.h: Ditto.
- * config/rs6000/tm-rs6000.h: Ditto.
- * config/sparc/tm-sparc.h: Ditto.
-
-Tue Feb 20 17:32:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * config/{i386,ns32k}/nbsd.mh (NATDEPFILES): Remove core-aout.o.
-
- * config/nm-nbsd.h (FETCH_INFERIOR_REGISTERS): Defined.
- * config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
- #ifdef'd out definitions --- Causes serious gdb failures on
- the i386. Need to investigate further before enabling.
-
- * i386b-nat.c (fetch_inferior_registers, store_inferior_registers,
- fetch_core_registers): New functions. These functions are defined
- if FETCH_INFERIOR_REGISTERS is set. Registers are fetched/stored
- with ptrace PT_GETREGS/PT_SETREGS.
-
-Tue Feb 20 16:55:06 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * findvar.c (extract_floating store_floating): Replace `long
- double' with `DOUBLEST'.
-
-Mon Feb 19 15:25:51 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
- Define.
-
-Mon Feb 19 10:32:05 1996 Jeffrey A Law (law@cygnus.com)
-
- * symtab.h (looup_minimal_symbol_solib_trampoline): Declare.
-
- * breakpoint.h (remove_solib_event_breakpoints): Declare.
- * breakpoint.c (remove_solib_event_breakpoints): New function.
- * somsolib.c (solib_create_inferior_hook): Remove all solib event
- breakpoints before inserting any new ones. Use a solib event
- breakpoint for the breakpoint at "_start".
- Remove extraneous "\n" from calls to warning.
-
- * breakpoint.c (breakpoint_1): Add missing "sigtramp" to bptypes
- name array.
-
-Mon Feb 19 01:09:32 1996 Doug Evans <dje@cygnus.com>
-
- * dwarfread.c (add_partial_symbol): Use ADD_PSYMBOL_ADDR_TO_LIST
- for CORE_ADDR values.
- (new_symbol): Use SYMBOL_VALUE_ADDRESS for CORE_ADDR values.
- * symfile.h (add_psymbol_{,addr}to_list): Add prototypes.
-
-Sun Feb 18 14:37:13 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mipsread.c (mipscoff_symfile_read): Unconditionally add
- alpha coff dynamic symbols for all symbol files. Makes skipping
- over the trampoline code work when stepping from a function in a
- shared library into a function in a different shared library.
-
-Sun Feb 18 09:27:10 1996 Stu Grossman (grossman@cygnus.com)
-
- * config/sparc/tm-sparc.h: Define PS_FLAG_CARRY. Define
- RETURN_VALUE_ON_STACK to return long doubles on the stack.
-
-Sat Feb 17 16:33:11 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (ch-exp.o): Add dependencies.
- (various): Add gdb_string.h to dependencies that need it.
-
-Sat Feb 17 08:57:50 1996 Fred Fish <fnf@cygnus.com>
-
- * symmisc.c (print_symbol_bcache_statistics): Update description for
- printing byte cache statistics.
-
-Thu Feb 16 16:02:03 1996 Stu Grossman (grossman@cygnus.com)
-
- * Add native support for long double data type.
- * c-exp.y (%union): Change dval to typed_val_float. Use DOUBLEST
- to store actual data. Change types of INT and FLOAT tokens to
- typed_val_int and typed_val_float respectively. Create new token
- DOUBLE_KEYWORD to specify the string `double'. Make production
- for FLOAT use type determined by parse_number. Add production for
- "long double" data type.
- * (parse_number): Use sscanf to parse numbers as float, double or
- long double depending upon the type of typed_val_float.dval. Also
- allow user to specify `f' or `l' suffix to explicitly specify
- float or long double constants. Change typed_val to
- typed_val_int.
- * (yylex): Change typed_val to typed_val_int. Also, scan for
- "double" keyword.
- * coffread.c (decode_base_type): Add support for T_LNGDBL basic
- type.
- * configure, configure.in: Add check for long double support in
- the host compiler.
- * defs.h: Define DOUBLEST appropriatly depending on whether
- HAVE_LONG_DOUBLE (from autoconf) is defined. Also, fix prototypes
- for functions that handle this type.
- * expression.h (union exp_element): doubleconst is now type
- DOUBLEST.
- * m2-exp.y f-exp.y (%union): dval becomes type DOUBLEST.
- * findvar.c (extract_floating): Make return value be DOUBLEST.
- Also, add support for numbers with size of long double.
- * (store_floating): Arg `val' is now type DOUBLEST. Handle all
- floating types.
- * parser-defs.h parse.c (write_exp_elt_dblcst): Arg expelt is now
- DOUBLEST.
- * valarith.c (value_binop): Change temp variables v1, v2 and v to
- type DOUBLEST. Coerce type of result to long double if either op
- was of that type.
- * valops.c (value_arg_coerce): If argument type is bigger than
- double, coerce to long double.
- * (call_function_by_hand): If REG_STRUCT_HAS_ADDR is defined, and
- arg type is float and > 8 bytes, then use pointer-to-object
- calling conventions.
- * valprint.c (print_floating): Arg doub is now type DOUBLEST.
- Use appropriate format and precision to print out floating point
- values.
- * value.h: Fixup prototypes for value_as_double,
- value_from_double, and unpack_double to use DOUBLEST.
- * values.c (record_latest_value): Remove check for invalid
- floats. Allow history to store them so that people may examine
- them in hex if they want.
- * (value_as_double unpack_double): Change return value to DOUBLEST.
- * (value_from_double): Arg `num' is now DOUBLEST.
- * (using_struct_return): Use RETURN_VALUE_ON_STACK macro (target
- specific) to expect certain types to always be returned on the stack.
-
-Fri Feb 16 14:00:54 1996 Fred Fish <fnf@cygnus.com>
-
- * bcache.c, bcache.h: New files to implement a byte cache.
- * Makefile.in (SFILES): Add bcache.c.
- (symtab_h): Add bcache.h.
- (HFILES_NO_SRCDIR): add bcache.h
- (COMMON_OBJS): Add bcache.o
- (bcache.o): New target.
- * dbxread.c (start_psymtab): Make global_syms & static_syms
- type "partial_symbol **".
- * hpread.c (hpread_start_symtab): Ditto.
- * os9kread.c (os9k_start_psymtab): Ditto.
- * stabsread.h (start_psymtab): Ditto.
- * {symfile.c, symfile.h} (start_psymtab_common): Ditto.
- * maint.c (maintenance_print_statistics): Call
- print_symbol_bcache_statistics.
- * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc
- and free pointers.
- * solib.c (allocate_rt_common_objfile): Ditto.
- * symfile.c (reread_symbols): Ditto.
- (free_objfile): Free psymbol bcache when objfile is freed.
- (objfile_relocate): Use new indirect psymbol pointers.
- * objfiles.h (struct objfile): Add psymbol cache.
- * symfile.c (compare_psymbols): Now passed pointers to pointers to
- psymbols.
- (reread_symbols): Free psymbol bcache when freeing other objfile
- resources.
- (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new
- psymbol using the psymbol bcache.
- (init_psymbol_list): Psymbol lists now contain pointers rather than
- the actual psymbols.
- * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically
- grown arrays of pointers.
- (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol
- bcache.
- * symmisc.c (print_partial_symbols): Now takes pointer to pointer
- to partial symbol.
- (print_symbol_bcache_statistics): New function to print per objfile
- bcache statistics.
- (print_partial_symbol, print_partial_symbols,
- maintenance_check_symtabs, extend_psymbol_list):
- Account for change to pointer to pointer to partial symbol.
- * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2,
- make_symbol_completion_list):
- Account for change to pointer to pointer to partial symbol.
- * symtab.h (bcache.h): Include.
- * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms
- type "partial_symbol **".
-
-Fri Feb 16 10:02:34 1996 Fred Fish <fnf@cygnus.com>
-
- * dwarfread.c (free_utypes): New function.
- (read_file_scope): Call free_utypes as cleanup, rather than just
- freeing the utypes pointer.
-
-Thu Feb 15 21:40:52 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * demangle.c (is_cplus_marker): New function, checks if a
- character is one of the commonly used C++ marker characters.
- * defs.h (is_cplus_marker): Add prototype.
- * c-typeprint.c (c_type_print_base), ch-lang.c (chill_demangle),
- cp-valprint.c (cp_print_class_method), mdebugread.c (parse_symbol),
- stabsread.c (define_symbol, read_member_functions, read_struct_fields),
- symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P),
- values.c (vb_match): Use is_cplus_marker instead of comparison
- with CPLUS_MARKER.
-
-Thu Feb 15 18:08:13 1996 Fred Fish <fnf@cygnus.com>
-
- * symfile.h (INLINE_ADD_PSYMBOL): Default this to 0 and possibly
- delete entirely someday.
-
-Thu Feb 15 15:25:34 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Edit out makefile rebuild rule.
- (host_alias, target_alias): Comment out instead of deleting.
- (@LIBS@): Edit out references.
-
-Tue Feb 13 22:56:46 1996 Fred Fish <fnf@cygnus.com>
-
- * symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
- Use n_psyms in OBJSTAT, not psyms.
-
-Mon Feb 12 15:59:31 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * configure.in (sparclet-*-aout*): New config.
- * configure: Regenerated.
-
-Mon Feb 12 14:17:52 1996 Fred Fish <fnf@cygnus.com>
-
- * somsolib.c (som_solib_add): Use xmalloc rather than bare
- unchecked call to malloc.
- * remote-mips.c (pmon_load_fast): ditto.
- * remote-mm.c (mm_open): ditto.
- * hpread.c (hpread_lookup_type): ditto.
- * remote-adapt.c (adapt_open): ditto.
-
-Mon Feb 12 13:11:32 1996 Fred Fish <fnf@cygnus.com>
-
- * f-lang.c (allocate_saved_bf_node, allocate_saved_function_node,
- allocate_saved_f77_common_node, allocate_common_entry_node,
- add_common_block): Use xmalloc rather than malloc, some of which
- were unchecked.
- * gnu-regex.c: At same point as other gdb specific changes
- #undef malloc and then #define it to xmalloc.
- * ch-exp.c (growbuf_by_size): Use xmalloc/xrealloc rather than
- bare unchecked calls to malloc/realloc.
- * stabsread.c (dbx_lookup_type): Use xmalloc rather than bare
- unchecked call to malloc.
-
-Wed Feb 7 11:31:26 1996 Stu Grossman (grossman@cygnus.com)
-
- * symtab.c (gdb_mangle_name): Change opname var to be const to
- match return val of cplus_mangle_name.
- * i960-tdep.c: Change arg types of next_insn to match callers.
-
-Wed Feb 7 07:34:24 1996 Fred Fish <fnf@cygnus.com>
-
- * config/i386/linux.mh (XM_CLIBS, GDBSERVER_LIBS): Remove. These
- apparently aren't needed in any reasonably recent version of
- linux.
-
-Tue Feb 6 21:37:03 1996 Per Bothner <bothner@kalessin.cygnus.com>
-
- * stabsread.c (read_range_type): If !self-subrange and language
- is Chill, assume a true range. If a true_range is a sub_subrange,
- use builtin_type_int for index_type.
-
-Tue Feb 6 18:38:51 1996 J.T. Conklin <jtc@slave.cygnus.com>
-
- * nindy-share/nindy.c (say): Use stdarg.h macros when compiling
- with an ANSI compiler.
-
-start-sanitize-gdbtk
-Tue Feb 6 16:31:25 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.tcl (create_file_win): Eliminate text widget B1 binding so
- double-clicking will work again.
- (create_asm_win): Put "break" at end of all B1 bindings.
- (create_file_win): Lower "sel" tag, don't raise it.
- (ensure_line_visible): New proc.
- (update_listing, update_assembly): Use it.
- (create_copyright_window): Destroy window on Leave event.
- (create_command_window): Put "break" at end of all B2 bindings.
-
-end-sanitize-gdbtk
-Mon Feb 5 18:24:28 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- From Michael_Snyder@NeXT.COM (Michael Snyder):
- * valops.c (value_arg_coerce): Coerce float to double, unless the
- function prototype specifies float.
-
-Mon Feb 5 09:51:55 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * language.c (set_language_command): Use languages table when
- printing available languages.
-
-Sat Feb 3 12:22:05 1996 Fred Fish <fnf@cygnus.com>
-
- Fix problems reported by Hans Verkuil (hans@wyst.hobby.nl):
- * command.c (add_cmd): Add missing initialization for enums member.
- Reorder members to match structure declaration to make it easier to
- tell when one is missing.
- * exec.c (exec_file_command): Fix problem where filename in malloc'd
- memory is referenced after being freed.
-
-Sat Feb 3 03:26:21 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * dwarfread.c (read_func_scope): Avoid GDB core dumps if
- AT_name tag is missing.
-
- * procfs.c (procfs_stopped_by_watchpoint): Fix logic when
- FLTWATCH and FLTKWATCH are defined.
-
- * remote.c (remote_read_bytes): Advance memaddr for transfers,
- return number of bytes transferred for partial reads.
-
- * top.c (init_signals): Reset SIGTRAP to SIG_DFL.
-
-Fri Feb 2 13:40:50 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- * win32-nat.c (mappings): Add ppc registers.
- (child_resume): Turn off step for ppc.
-
-Thu Feb 1 10:29:31 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- * config/powerpc/(cygwin32.mh, cygwin32.mt, tm-cygwin32.h,
- xm-cygwin32.h): New.
- * config/i386/(*win32*): Becomes *cygwin32*.
- * configure.in (i[3456]86-*-win32*): Becomes i[3456]86-*-cygwin32.
- (powerpcle-*-cygwin32): New.
- * configure: Regenerate.
- * win32-nat.c (child_create_inferior): Call CreateProcess
- with the right program arg.
-
-Thu Feb 1 11:01:10 1996 Jeffrey A Law (law@cygnus.com)
-
- * config/pa/tm-hppa.h (SOFT_FLOAT): Provide a default definition.
-
-Wed Jan 31 19:01:28 1996 Fred Fish <fnf@cygnus.com>
-
- * serial.c: Change fputc/fputs/fprintf to _unfiltered forms.
-
-Wed Jan 31 18:36:27 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove.
-
- * config/sparc/xm-sparc.h (HAVE_WAIT_STRUCT): Remove, never used.
-
- * config/i386/nm-i386mach.h (CHILD_PREPARE_TO_STORE): Move to
- here from config/i386/xm-i386mach.h, fix name.
- * config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
- * config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
- here from config/i386/xm-ptx4.h.
- * config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h.
- * config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
- * config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
- * config/sparc/nm-nbsd.h: Ditto, from config/sparc/xm-nbsd.h.
- * config/sparc/nm-sun4os4: Ditto, from config/sparc/xm-sparc.h.
-
- * config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h.
- (PRSVADDR_BROKEN): Move here from xm-sun4sol2.h.
- * config/sparc/sun4sol2.mh (NAT_FILE): Update.
-
-Wed Jan 31 17:20:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Handle software
- floating point correctly.
- (STORE_RETURN_VALUE): Likewise.
- * config/pa/tm-pro.h (SOFT_FLOAT): define.
-
-Wed Jan 31 13:34:52 1996 Fred Fish <fnf@cygnus.com>
-
- * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
- Define to what should be reasonable values. However, apparently
- a bug in linux mmap prevents mapped symbol tables from working.
-
-Tue Jan 30 18:26:19 1996 Fred Fish <fnf@cygnus.com>
-
- * defs.h (errno.h>: Move #include closer to head of file to solve
- obscure problem with systems that declare perror with const arg, in
- both errno.h and stdio.h, and const is defined away by intervening
- local include.
-
-Tue Jan 30 15:41:10 1996 Fred Fish <fnf@cygnus.com>
-
- From Jon Reeves <reeves@zk3.dec.com>:
- * i386-stub.c (getpacket): Change fprintf stream from "gdb" to stderr.
- (mem_fault_routine): Fix misplaced volatile type qualifier in decl.
-
-Mon Jan 29 19:05:58 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (diststuff): Make all-doc; diststuff target does not
- exist in doc/Makefile.in.
-
-Mon Jan 29 18:44:57 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/m88k/xm-cxux.h (BP_HIT_COUNT): Remove, never used.
-
-Mon Jan 29 00:10:35 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-valprint.c (calculate_array_length): New function to
- determine the length of an array type.
- (chill_val_print (case TYPE_CODE_ARRAY)): If the length of an
- array type is zero, call calculate_array_length.
-
- * gdbtypes.c (get_discrete_bounds (case TYPE_CODE_ENUM)): The
- values may not be sorted. Scan all entries and set the real lower
- and upper bound.
-
-Sun Jan 28 15:50:42 1996 Fred Fish <fnf@cygnus.com>
-
- * config/xm-linux.h: Move include of solib.h and #define of
- SVR4_SHARED_LIBS from here ...
- * config/nm-linux.h: ...to here.
-
-Sat Jan 27 10:34:05 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in (AC_CHECK_HEADERS): Check for sys/procfs.h.
- Also check for gregset_t and fpregset_t types.
- * configure: Regenerate.
- * core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
- is defined.
- (fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
- and HAVE_FPREGSET_T are defined. These changes allow systems
- like linux that are migrating to /proc support to use a single
- configuration for both new and old versions.
-
- * config/i386/linux.mt: Note that this is now for both a.out and
- ELF systems.
- * config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
- i386v4-nat.o
- * config/i386/tm-linux.h (tm-sysv4.h): Include.
- * config/i386/xm-linux.h (solib.h): Include
- (SVR4_SHARED_LIBS): Define.
- * i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
- (supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
- (supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T
- defined.
-
-Fri Jan 26 13:48:14 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/sparc/xm-sparc.h (NEW_SUN_CORE): Remove, never used.
- * config/i386/xm-sun386.h: Ditto.
- * config/m68k/xm-sun2.h, config/m68k/xm-sun3.h: Ditto.
-
-Thu Jan 25 16:05:53 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * Makefile.in (INSTALLED_LIBS, CLIBS): Include @LIBS@.
-
-Thu Jan 25 09:22:15 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- From Greg McGary <gkm@gnu.ai.mit.edu>:
- * dcache.c (dcache_peek, dcache_poke): Advance addr for
- multi-byte I/O.
-
-Thu Jan 25 13:08:51 1996 Doug Evans (dje@cygnus.com)
-
- * infrun.c (normal_stop): Fix test for shared library event.
-
-Thu Jan 25 03:26:38 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * configure.in (sparc64-*-*): Add default host configuration.
-start-sanitize-gdbtk
- (sparc64-*-solaris2* host): Link statically if GCC used.
-end-sanitize-gdbtk
- (sparc64-*-solaris2*): Add target configuration.
- * configure: Regenerated.
- * sparc/sp64sol2.mt: New file.
-
-Wed Jan 24 22:31:37 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * Makefile.in (RUNTEST): srcdir renamed to rootsrc.
-
-Wed Jan 24 15:42:24 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * Makefile.in (lint): Close backquotes.
-
-start-sanitize-gdbtk
-Wed Jan 24 15:28:41 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.tcl, gdbtk.c: Updated copyrights.
-
- * configure.in: Look for -ldl or -ldld when using Tcl 7.5 or
- greater.
- * configure: Rebuilt.
-
-end-sanitize-gdbtk
-Wed Jan 24 13:19:10 1996 Fred Fish <fnf@cygnus.com>
-
- * NEWS: Make note of new record and replay feature for
- remote debug sessions.
- * serial.c (gdbcmd.h): Include.
- (serial_logfile, serial_logfp, serial_reading, serial_writing):
- Define here, for remote debug session logging.
- (serial_log_command, serial_logchar, serial_write, serial_readchar):
- New functions for remote debug session logging.
- (serial_open): Open remote debug session log file when needed.
- (serial_close): Close remote debug session log file when needed.
- (_initialize_serial): Add set/show commands for name of remote
- debug session log file.
- * serial.h (serial_readchar): Declare
- (SERIAL_READCHAR): Call serial_readchar().
- (SERIAL_WRITE): Call serial_write().
- (serial_close): Declare as extern.
- (serial_logfile, serial_logfp): Declare.
- * top.c (execute_command): Declare serial_logfp. Log user command
- in remote debug session log if log file is open.
- * remote-array.c (array_wait): #ifdef out echo to gdb_stdout.
- (array_read_inferior_memory): Rewrite to fix memory overwrite bug.
- * remote-array.c (SREC_SIZE): Remove, duplicates define in
- monitor.h.
- * remote-array.c (hexchars, hex2mem): Remove, unused.
- * gdbserver/low-linux.c (store_inferior_registers): Remove
- unnecessary extern declaration of registers[].
- * gdbserver/Makefile.in (all): Add gdbreplay.
- * gdbserver/gdbreplay.c: New file.
- * gdbserver/README: Give example of recording a remote
- debug session with gdb and then replaying it with gdbreplay.
-
-Tue Jan 23 18:02:35 1996 Per Bothner <bothner@kalessin.cygnus.com>
-
- * stabsread.c (rs6000_builtin_type): Make bool type unsigned.
- (read_one_struct_field): Support boolean bitfields.
- * c-valprint.c (c_val_print): Print booleans properly.
-
-Tue Jan 23 18:54:09 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-vxsparc.c (vx_convert_to_virtual, vx_convert_from_virtual):
- Remove, never used.
- * config/sparc/vxsparc.mt (TDEPFILES): Add remote-vxsparc.o.
-
-Tue Jan 23 14:36:05 1996 Per Bothner <bothner@kalessin.cygnus.com>
-
- * ch-exp.c (parse_tuple): Error if invalid mode.
-
- * value.h (COERCE_ARRAY): Don't coerce enums.
- (COERCE_ENUM): Don't COERCE_REF.
- (COERCE_NUMBER): New macro (same as COERCE_ARRAY then COERCE_ENUM).
- * valops.c (value_assign): Only do COERCE_ARRAY if internalvar (let
- value_cast handle it otherwise); do *not* COERCE_ENUM either way.
- * valarith.c: Use COERCE_NUMBER instead od COEREC_ARRAY.
- Add COERCE_REF before COERCE_ENUM.
- * values.c (value_as_long): Simplify.
-
- * valops.c (value_array): Create internalvar if !c_style_arrays.
-
- * language.c (lang_bool_type): Add Fortran support.
- * eval.c (OP_BOOL): Use LA_BOOL_TYPE.
-
-Tue Jan 23 13:08:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup.
- All references changed.
- * breakpoint.c (bpstat_what): Add shlib_event to the class types.
- Update state table. Reformat so that it's still readable.
- When we hit the shlib_event breakpoint, set the calss of shlib_event.
- (breakpoint_1): Add "shlib events" as a breakpoint type.
- Print the shlib_event breakpoint like other breakpoints.
- (create_solib_event_breakpoint): New function.
- (breakpoint_re_set_one): Handle solib_event breakpoints.
- * breakpoint.h (enum bytype): Add bp_shlib_event breakpoint type.
- (enum bpstat_what_main_action): Add BPSTAT_WHAT_CHECK_SHLIBS
- action.
- (create_solib_event_breakpoint): Declare.
- * infrun.c (wait_for_inferior): Handle CHECK_SHLIBS bpstat.
- (normal_stop): Inform the user when the inferior stoped due
- to a shared library event.
- (_initialize_infrun): Add new set/show variable "stop-on-solib-events"
- to control whether or not gdb continues the inferior or stops it when
- a shared library event occurs.
- * minsyms.c (lookup_minimal_symbol_solib_trampoline): New function.
- * somsolib.c (TODO list): Update.
- (som_solib_create_inferior_hook): Arrange for gdb to be notified
- when significant shared library events occur.
- * hppa-tdep.c (find_unwind_entry): No longer static.
-
-Tue Jan 23 09:00:48 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * printcmd.c (print_insn): Pass fprintf_unfiltered to
- INIT_DISASSEMBLE_INFO.
-start-sanitize-gdbtk
- * gdbtk.c (gdb_disassemble): Likewise.
-end-sanitize-gdbtk
-
-Mon Jan 22 16:59:40 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote.c (remotebreak): New GDB variable.
- (remote_break): New global.
- (remote_interrupt): Send a break instead of ^C if remote_break.
- * NEWS: Describe the new variable.
-
-Mon Jan 22 16:24:11 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-tdep.c (_initialize_sparc_tdep): Always use print_insn_sparc.
-
-Fri Jan 19 07:19:38 1996 Fred Fish <fnf@cygnus.com>
-
- * hp300ux-nat.c (getpagesize): Remove unused function
- fetch_core_registers.
- (hp300ux_core_fns): Remove, is unused.
- (_initialize_core_hp300ux): Remove, is unused.
- (gdbcore.h): Remove #include, no longer needed.
-
-Fri Jan 19 00:59:53 1996 Jeffrey A Law (law@cygnus.com)
-
- * rs6000-nat.c (exec_one_dummy_insn): Rework to avoid
- ptrace bug in aix4.1.3 on the rs6000.
-
-Wed Jan 17 13:22:27 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-hms.c (hms_ops): Add value for to_thread_alive.
- * remote-nindy.c (nindy_ops): Ditto.
- * remote-udi.c (udi_ops): Ditto.
-
-Tue Jan 16 18:00:35 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * remote-mips.c (pmon_opn, pmon_wait, pmon_makeb64, pmon_zeroset,
- pmon_checkset, pmon_make_fastrec, pmon_check_ack,
- pmon_load_fast): New functions. Support for the PMON monitor world.
- (common_open): New function to merge support for different monitors.
- (mips_open): Use common_open().
- (mips_send_command): New function.
- (mips_send_packet): Scan out-of-sequence packets.
- (mips_enter_debug, mips_exit_debug): New functions.
- (pmon_ops): New target definition structure.
-
-Tue Jan 16 11:22:58 1996 Stu Grossman (grossman@cygnus.com)
-
- * Makefile.in (CLIBS): Add LIBS to allow libraries to be
- specified on the make command line (via make LIBS=xxx).
-start-sanitize-gm
- * configure.in (enable-gm): magic.o -> gmagic.o.
-end-sanitize-gm
-
-start-sanitize-gdbtk
-Mon Jan 15 09:58:41 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.tcl (create_expr_window): Many changes to update GUI.
- (add_expr): Changes from create_expr_window.
- (create_command_window): Set focus.
- (delete_expr): Rewrote.
- (expr_update_button): New proc.
- (add_expr): Put bindings on FocusIn, FocusOut.
- Don't allow .file_popup to be torn off.
-end-sanitize-gdbtk
-
-Fri Jan 12 21:41:58 1996 Jeffrey A Law (law@cygnus.com)
-
- * symtab.c (find_pc_symtab): Don't lose if OBJF_REORDERED
- is set but there are no psymtabs.
-
-Fri Jan 12 15:56:12 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- * dsrec.c (load_srec): Remove unused variable.
- * monitor.c (monitor_expect): Don't expect a ^C to echo.
- * serial.c (serial_open): Add parallel interface.
- * sh3-rom.c (parallel, parallel_in_use): New.
- (sh3_load): If parallel_in_use, download though the
- parallel port.
- (sh3_open): Open parallel port if specified.
- (sh3_close): New function.
- (_inititalize_sh3): Add sh3_close hook and documentation.
- * monitor.c (monitor_close): Export.
- * monitor.h (monitor_close): Add prototype.
-
-Fri Jan 12 13:11:42 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
- * remote.c (remotetimeout): New GDB variable, use to set the
- remote timeout for reading.
-
-start-sanitize-gdbtk
-Fri Jan 12 09:36:17 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.tcl (gdbtk_tcl_query): Swap Yes and No buttons.
- (update_listing): Use lassign. Use "see" to scroll. Don't need
- screen_top, screen_bot, screen_height.
- (update_assembly): Use "see" to scroll.
- (textscrollproc): Removed.
- (create_file_win): Don't use textscrollproc.
- (asmscrollproc): Removed.
- (create_asm_window): Don't use asmscrollproc.
- (create_asm_win): Ditto.
- (screen_height, screen_top, screen_bot): Removed.
- (run_editor): New proc.
- (build_framework): Use it.
- (create_file_win, create_source_window): Don't use textscrollproc.
- (create_breakpoints_window): Set -xscrollcommand on canvas.
- (not_implemented_yet): Default button is 0.
- (delete_char): Don't use tk_textBackspace.
- (create_command_window): Allow Tk bindings to fire after deleting
- character.
- (create_command_window): Make Delete delete left, not right.
-end-sanitize-gdbtk
-
-Fri Jan 12 07:14:27 1996 Fred Fish <fnf@cygnus.com>
-
- * lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h
- to get "struct core_fns" defined.
- * Makefile.in (lynx-nat.o, irix4-nat.o, sparc-nat.o):
- Are dependent upon gdbcore_h.
-
-Thu Jan 11 23:13:24 1996 Per Bothner <bothner@cygnus.com>
-
- * symfile.c (decrement_reading_symtab): New function.
- * symfile.c, symtab.h (currently_reading_symtab): New variable.
- * symfile.c (psymtab_to_symtab): Adjust currently_reading_symtab.
- * gdbtypes.c (check_typedef): Don't call lookup_symbol if
- currently_reading_symtab (since that could infinitely recurse).
-
-Thu Jan 11 17:21:25 1996 Per Bothner <bothner@kalessin.cygnus.com>
-
- * stabsread.c (read_struct_type): Trivial simplification.
-
- * stabsread.c (define-symbol): Use invisible references
- for TYPE_CODE_SET and TYPE_CODE_BITSTRING too.
- * valops.c (call_function_by_hand): Likewise.
- * eval.c (evaluate_subexp_standard): When known, use the formal
- parameter type as the expected type when evaluating arg expressions.
- * ch-lang.c (evaluate_subexp_chill): Likewise (for MULTI_SUBSCRIPT).
-
-start-sanitize-gdbtk
-Thu Jan 11 10:08:14 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * main.c (main): Disable window interface if --help or --version
- specified.
-
- * gdbtk.tcl (FSBox): Don't use tk_listboxSingleSelect.
-
- Changes in sync with expect:
- * configure.in (ENABLE_GDBTK): Use CY_AC_PATH_TCL and
- CY_AC_PATH_TK.
- * aclocal.m4: Replaced with version from expect.
- * configure: Regenerated.
-end-sanitize-gdbtk
-
-Wed Jan 10 16:08:49 1996 Brendan Kehoe <brendan@lisa.cygnus.com>
-
- * configure.in, configure: Recognize rs6000-*-aix4*.
- * config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h".
- * config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h.
- * config/rs6000/xm-aix4.h: New file.
- * config/xm-aix4.h: New file.
-
-Wed Jan 10 11:25:37 1996 Fred Fish <fnf@cygnus.com>
-
- From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
- * gdbserver/low-linux.c: New file.
- * remote.c (remote_read_bytes): Fix aborts on larger packets.
-
- * config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
- Define.
- * stabsread.c (define_symbol): If register value is too large,
- tell what it is and what max is.
-
-start-sanitize-gdbtk
-Wed Jan 10 09:07:22 1996 Tom Tromey <tromey@creche.cygnus.com>
-
- * gdbtk.tcl (gdbtk_tcl_fputs, gdbtk_tcl_fputs_error,
- gdbtk_tcl_flush): Use "see", not "yview".
- (gdbtk_tcl_query): Use questhead bitmap.
- various: Always wrap condition of 'if' in {...}.
- (add_breakpoint_frame): Set -value on radiobuttons.
- (lassign): New proc.
- (add_breakpoint_frame): Use lassign, not series of assignments.
- (decr): Made faster.
- (interactive_cmd): Use "see", not "yview".
- (not_implemented_yet): Use warning bitmap.
- (update_expr): Don't allow $expr to be evalled by Tcl.
- (create_expr_window): Don't use "focus".
- (delete_char, delete_line): Define globally.
- (delete_line, delete_char, create_command_window, update_autocmd,
- build_framework, create_asm_win, create_file_win): Use "see", not
- "yview".
- (create_copyright_window, center_window, bind_widget_after_class):
- New procs.
- (FSBox,create_command_window, create_autocmd_window): Binding
- changes for Tk4.
- (textscrollproc): Define globally.
- (build_framework): tk_menuBar no longer needed. Keys Prior, Next,
- Home, End, Up, and Down are all defined by Tk.
- (apply_filespec): Use error bitmap in dialog.
- (files_command): Don't use tk_listboxSingleSelect.
- (files_command): Don't use "uniq" to remove duplicates from a
- list.
- (update_assembly): Use lassign.
- (create_asm_win): Removed redundant bindings.
- (listing_window_button_1, file_popup_menu): Use tk_popup.
- (ButtonRelease-1 binding): Just remove tag from window; rest
- handled by Tk.
-
- * gdbtk.c (gdbtk_query): Use Tcl_Merge to provide quoting.
- (call_wrapper): Use Tcl_Eval, not Tcl_VarEval.
- (gdbtk_call_command): Ditto.
-end-sanitize-gdbtk
-
-Tue Jan 9 09:33:53 1996 Jeffrey A Law (law@cygnus.com)
-
- * hpread.c (hpread_build_psymtabs): Finish Jan 4th
- enum namespace -> enum_namespace change.
-
-Tue Jan 9 04:44:47 1996 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-exp.c (parse_primval): In case ARRAY, add missing
- FORWARD_TOKEN ().
-
-Mon Jan 8 13:29:34 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-mips.c (mips_receive_header): Recognize \012 instead
- of \n, but write \n when program sends a \012.
- * ser-mac.c (mac_input_buffer): Increase size of buffer.
-
-Mon Jan 8 12:00:40 1996 Jeffrey A Law (law@cygnus.com)
-
- * infptrace.c (initialize_infptrace): Move function out of
- #ifdef conditional; put code within the function inside an
- #ifdef conditional.
-
- * buildsym.c (end_symtab): Remove sort_pending and sort_linevec
- arguments. Sorting is now dependent on OBJF_REORDERED. All
- callers/references changed.
- * dbxread.c (read_ofile_symtab): Correctly determine value for
- last_source_start_addr for reordered executables.
- (process_one_symbol): Handle N_FUN with no name as an end of
- function marker.
- * partial-stab.h (case N_FN, N_TEXT): Don't assume CUR_SYMBOL_VALUE
- is the high text address for a psymtab.
- (case N_SO): Likewise.
- (case N_FUN): Handle N_FUN with no name as an end of function
- marker.
- * minsyms.c (lookup_minimal_symbol_by_pc): Examine all symbols
- at the same address rather than a random subset of them.
- * coffread.c (coff_symfile_init): Set OBJF_REORDERED.
- * elfread.c (elf_symfile_init): Similarly.
- * somread.c (som_symfile_init): Similarly.
- * xcoffread.c (xcoff_symfile_init): Similarly.
-
-Fri Jan 5 17:46:01 1996 Stu Grossman (grossman@cygnus.com)
-
- * stack.c (print_stack_frame print_frame_info) symmisc.c
- (dump_symtab): Change RETURN_MASK_ERROR to RETURN_MASK_ALL so
- that catch_errors doesn't get blindsided by QUIT and lose the
- cleanup chain. This fixes a problem where ^C while in a
- user-defined command sometimes leaves instream NULL and causes a
- segfault in command_loop.
-
-Fri Jan 5 13:59:16 1996 Brendan Kehoe <brendan@lisa.cygnus.com>
-
- * configure.in, configure: Add `-ldl -lw' for Solaris linking.
-
-Fri Jan 5 12:02:00 1996 Steve Chamberlain <sac@slash.cygnus.com>
-
- * config/sh/sh.mt, config/powerpc/*.mt, config/pa/hppapro.mt,
- config/m68k/monitor.mt, config/h8500/h8500.mt, config/h8300/h8300.mt:
- srec.o renamed to dsrec.o.
-
-Thu Jan 4 16:04:54 1996 Stu Grossman (grossman@cygnus.com)
-
- * breakpoint.c (remove_breakpoint): Change error to warning so
- that hardware watchpoint removal problems won't leave breakpoint
- traps in the target.
-start-sanitize-gdbtk
- * configure configure.in: Make --enable-gdbtk be the default.
-end-sanitize-gdbtk
- * remote-e7000.c (e7000_insert_breakpoint,
- e7000_remove_breakpoint): Use e7000 based breakpoints, not memory
- breakpoints.
- * (e7000_wait): Adjust PC back by two when we see a breakpoint to
- compensate for e7000 maladjustment.
- * sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug
- which prevented hardware watchpoints from working.
-
-Thu Jan 4 10:44:17 1996 Fred Fish <fnf@cygnus.com>
-
- * infptrace.c (udot_info): New function.
- (PT_*): Define each individually if that one is not defined.
- * rs6000-nat.c (kernel_u_size): New function
- Include <sys/user.h> for "struct user"
- * alpha-nat.c (kernel_u_size): New function.
- Include <sys/user.h> for "struct user"
- * sparc-nat.c (kernel_u_size): New function.
- Include <sys/user.h> for "struct user"
- * i386b-nat.c (kernel_u_size): New function.
- * i386v-nat.c (kernel_u_size): New function.
- * config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define.
- (kernel_u_size): Declare.
- * config/i386/nm-linux.h (KERNEL_U_SIZE): Define.
- (kernel_u_size): Declare.
- * config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define.
- (kernel_u_size): Declare.
- * config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define.
- (kernel_u_size): Declare.
- * config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define.
- (kernel_u_size): Declare.
-
-Thu Jan 4 11:00:01 1996 steve chamberlain <sac@slash.cygnus.com>
-
- * mdebugread.c (mylookup_symbol): enum namespace becomes
- enum_namespace type.
- * symfile.c (add_psymbol_to_list)
- (add_psymbol_addr_to_list): Ditto.
- * symtab.c (lookup_partial_symbol): Ditto.
- (lookup_symbol): Ditto.
- (lookup_block_symbol): Ditto.
- * win32-nat.c (handle_load_dll): Use incoming dll base.
- (child_wait): Catch DLL load errors.
- (create_child_inferior): Translated between paths correctly.
-
-Wed Jan 3 23:13:53 1996 Fred Fish <fnf@cygnus.com>
-
- * i386v4-nat.c (supply_gregset, fill_gregset): Subtract NUM_FREGS
- from NUM_REGS to get number of general registers that we care about.
- * config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
- of number of general regs and number of floating point regs.
-
-Wed Jan 3 19:49:54 1996 steve chamberlain <sac@slash.cygnus.com>
-
- * config/i386/tm-win32.h (IN_SOLIB_CALL_TRAMPOLINE): New.
- (SKIP_TRAMPOLINE_CODE): New.
- * config/i386/xm-win32.h (CANT_FORK): Deleted.
- (SLASH*) Changed to use unix style slash.
- * symtab.h (namespace enum): becomes typedef to avoid namespace
- collision in C++.
- * infcmd.c (path_command): Use empty string if PATH name not set.
- * i386-tdep.c (skip_trampoline_code): New function.
- * srec.c: Renamed dsrec.c to avoid filename collision.
- * Makefile.in: Cope with renaming.
-
-Wed Jan 3 13:09:04 1996 Fred Fish <fnf@cygnus.com>
-
- * symmisc.c (print_objfile_statistics): Print memory use statistics
- for objfile psymbol, symbol, and type obstacks.
-Tue Jan 2 13:41:14 1996 Stan Shebs <shebs@andros.cygnus.com>
+Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
- * config/mips/nm-irix5.h: Restore.
- (TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4;
- from Lee Iverson <leei@ai.sri.com>.
- * config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h.
- * config/mips/irix[345].mh (MUNCH_DEFINE): Remove.
+ * mn10300-tdep.c (mn10300_push_arguments): rewrote,
+ also removed code elsewhere that made use of RP_REGNUM.
+ * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
+ ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
+ arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
+ EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
-For older changes see ChangeLog-95
+For older changes see ChangeLog-96
\f
Local Variables:
mode: indented-text
projects / deliverable / binutils-gdb.git / blobdiff