+Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
+ * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
+ (_initialize_gnu_nat): Call new init
+ * mac-nat.c (init_child_ops): Ditto
+ (_initialize_mac_nat): Ditto
+ * monitor.c (init_base_monitor_ops): Ditto
+ (_initialize_remote_monitors) : Ditto
+ * ppc-bdm.c (init_bdm_ppc_ops): Ditto
+ (_initialize_bdm_ppc): Ditto
+ * remote-adapt.c ( init_adapt_ops): Ditto
+ (_initialize_remote_adapt): Ditto
+ * remote-array.c (init_array_ops) : Ditto
+ (_initialize_array): Ditto
+ * remote-bug (init_bug_ops) : Ditto
+ (_initialize_remote_bug): Ditto
+ * remote-e7000.c (init_e7000_ops): Ditto
+ (_initialize_remote_e7000) : Ditto
+ * remote-eb.c (init_eb_ops) : Ditto
+ (_initialize_remote_eb) : Ditto
+ *remote-es.c (init_es1800_ops) : Ditto
+ (init_es1800_child_ops) : Ditto
+ (_initialize_es1800) ; Ditto
+ *remote-hms.c (init_hms_ops): Ditto
+ (_initialize_remote_hms) : Ditto
+ * remote-mm.c (init_mm_ops): Ditto
+ (_initialize_remote_mm) : Ditto
+ * remote-nindy.c (init_nindy_ops): Ditto
+ (_initialize_nindy): Ditto
+ * remote_nrom.c (init_nrom_ops) : Ditto
+ (_initialize_remote_nrom) : Ditto
+ *remote-os9k (init_rombug_ops) : Ditto
+ (_initialize_remote_os9k) : Ditto
+ *remote-rdi.c (init_rdi_ops) : Ditto
+ (_initialize_remote_rdi) : Ditto
+ * remote-rdp.c (init_remote_rdp_ops) : Ditto
+ (_initialize_remote_rdp) : Ditto
+ * remote-sds.c (init_sds_ops) : Ditto
+ (_initialize_remote_sds) : Ditto
+ * remote-sim.c (init_gdbsim_ops) : Ditto
+ (_initialize_remote_sim) : Ditto
+ * remote-st.c (init_st2000_ops): Ditto
+ (_initialize_remote_st2000): Ditto
+ *remote-udi.c (init_udi_ops) : Ditto
+ (_initialize_remote_udi) : Ditto
+ * remote-vx.c (init_vx_ops) : Ditto
+ (init_vx_run_ops) : Ditto
+ (_initialize_vx) : Ditto
+ * remote.c (init_remote_ops): Ditto
+ (init_extended_remote_ops): Ditto
+ (_initialize_remote): Ditto
+ * sparcl-tdep.c (init_sparclite_ops): Ditto
+ (_initialize_sparcl_tdep): Ditto
+ * v850ice.c (init_850ice_ops): Ditto
+ (_initialize_v850ice): Ditto
+ *win32-nat.c: (init_child_ops): Ditto
+ (_initialize_inftarg): Ditto
+
+Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com>
+
+ * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
+ * mips/tm-tx39l.h: Same.
+
+Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com>
+
+ * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
+ Split out as separate function called by skip prologue and scan
+ prologue. new formula handles optimization in which the prologue
+ is interleaved with the body of the function. Also recognizes new
+ variations of prologue encoding. Use of frame pointer is
+ essential to debugging, -fno-omit-frame-pointer
+ (m32r_skip_prologue): Call decode prologue, ignore line info
+ (m32r_scan_prologue): Call decode prologue, ignore line info.
+
+Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com>
+
+ * w89k-rom.c (_initialize_w89k): Call new init function
+ (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
+ data structure for forward compatability with additions to the
+ data structure.
+ * dbug-rom.c (_initialize_dbug_rom): ditto
+ (init_dbug_cmds): ditto
+ * m32r-rom.c (_initialize_m32r_rom): ditto
+ (init_m32r_cmds): ditto
+
+Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com>
+
+ * dbxread.c (process_one_symbol): If block addresses are relative to
+ function start addresses, reset function_start_address whenever a new
+ source file is seen.
+
+start-sanitize-d30v
+Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
+ frame struct before extracting saved register offsets.
+
+end-sanitize-d30v
+Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com>
+
+ * symtab.c (decode_line_1): set section for "break *<addr>"
+
+Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com>
+
+ * corefile.c (reopen_exec_file): Reopen the exec file if
+ it has changed.
+
+Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com>
+
+ * sparc-tdep.c (fetch_instruction): New function.
+ (single_step, sparc_init_extra_frame_info, examine_prologue):
+ Use fetch_instruction instead of read_memory_integer
+ to ensure that instructions are always read as big-endian.
+
+Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Add AC_FUNC_ALLOCA.
+ * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
+ alloca.
+ * configure: Rebuild.
+start-sanitize-java
+ * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
+ targets.
+end-sanitize-java
+
+Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * stabsread.c (read_one_struct_field): Check for typedef in type
+ tree before clearing bitfield information.
+
+Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com>
+
+ * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
+ %o0-%o5 as 64-bit values; compensate for stack bias.
+ (USE_STRUCT_CONVENTION): We only pass pointers to structs
+ if they're larger than 32 bytes.
+ (REG_STRUCT_HAS_ADDR): Ditto.
+
+ * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
+ instead of read_register. If the target is a sparc64 and the frame
+ pointer is odd, compensate for the stack bias.
+ (get_saved_register): Use read_sp().
+ (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
+ (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
+ save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
+ (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
+ CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
+ dummy frame.
+ (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
+ the FP is odd, compensate for stack bias.
+ (sparc_store_return_value): Right-justify the return value before
+ writing it to %o0.
+ (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
+ sparc64.
+ (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
+ sparc64_write_fp, sp64_push_arguments,
+ sparc64_extract_return_value): New functions to support the
+ sparc64 ABI.
+
+ * dwarfread.c (handle_producer): Set processing_gcc_compilation to
+ the right version number.
+
+ * dwarf2read.c (read_file_scope): Assume we're processing
+ GCC2 output.
+
+Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com)
+
+ * somsolib.c: Include gdb_stat.h.
+
+Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com>
+
+ * defs.h (make_run_cleanup): Declare.
+ * solib.c (find_solib): Pass correct number of arguments to
+ make_run_cleanup.
+
+Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * ocd.h: Add new flags, function codes, and processor types to support
+ new Wiggler capabilities.
+ * (ocd_write_bytes_size): New function to allow atomic writes of
+ memory in sizes larger than a byte.
+
+ * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
+
+Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * stabsread.c (read_one_struct_field): Do not override supplied
+ bitfield size for a range type value.
+
+ * gdbtypes.c (create_range_type): For a range with positive
+ lower limit, declare range type as unsigned.
+
+Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com>
+
+ * monitor.c: Turn off debug
+
+Fri May 1 09:29:56 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ * breakpoint.c (delete_command): Skip internal breakpoints when
+ all breakpoints are requested.
+
+ * stabsread.c (define_symbol): Record parameter types from Sunpro
+ function stabs in the TYPE_FIELDS of the function type.
+
+Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * Makefile.in (config-check-targets, config-check-hosts): Removed.
+
+1998-04-30 Paul Eggert <eggert@twinsun.com>
+
+ * Makefile.in (maintainer-clean):
+ Don't get ahead of yourself and delete Makefile
+ before running `make'.
+ (local-maintainer-clean, do-maintainer-clean): New rules.
+
+Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com>
+
+ * nec4102rom.c: New file implements ROM monitor adapter for
+ nec-vr4102 board. This board hosts the vr4111 chip. This file
+ required extensions to the monitor_ops structure, hooks for wait
+ filter, new flags. This version does not support more than one
+ breakpoint and resuming after a breakpoint in 16 bit mode is
+ completely disfunctional.
+
+ * monitor.h: Defined additional hooks for dmpregs, configure_hooks
+ and wait_filter. These additions require that all ROM monitor
+ interfaces be recoded to initialize monitor ops using assignments
+ rather than static structure initialization. Added new bits to
+ flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
+
+ * monitor.c (RDEBUG): Conditional tracing throughout the file.
+ (fromhex): Now recognized upper cse hex digits
+ (monitor_printf_noecho):
+ (monitor_readchar): Tracing interferes with input timing.
+ (monitor_open): Register different memory write functions with
+ dcache_init if MO_HAS_BLOCKWRITES.
+ (flush_monior_dcache): Added as an additional utilty.
+ (monitor-resume): Call continue hook if one has been supplied.
+ (monitor_wait_filter): New function Factored out of monitor wait
+ and used if alternate wait-filter has not been provided.
+ (monitor_wait): call alternate wait filter if provided. Call
+ monitor_dump_regs, a new function factored out from inline code.
+ (monitor_dump_block): A new function used as a utility when
+ monitors must dump several blocks of registers using different
+ commands.
+ (monitor_dump_regs): Call alternate function if provided. Uses new
+ hook in monitor.h.
+ (monitor_write_memory): Engage previouly added hook
+ MO_FILL_USES_ADDR.
+ (monitor_write_even_block): new function supports writing long
+ blocks of 4byte words.
+ (longlongendswap): new internal function
+ (monitor_write_memory_longlongs): new function writes large blocks
+ using command to enter a long long.
+ (monitor_write-memory_block): new Function figures out which block
+ mod to use.
+ (monitor_read_memory): Can now handle dump formats in which the bytes
+ preceeding the requested data is not printed.
+
+Tue Apr 28 19:41:33 1998 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (GDBTKLIBS): New macro.
+ (INSTALLED_LIBS): Include GDBTKLIBS.
+ (CLIBS): Likewise.
+ * configure: Rebuilt.
+ * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
+ (GDBTKLIBS): AC_SUBST.
+
+ * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
+ `memrange'.
+
+ * tracepoint.c (memrange_cmp): Fixed typo in function intro.
+
+Tue Apr 28 17:41:20 1998 Philippe De Muyter <phdm@macqel.be>
+
+ * symfile.c (overlay_auto_command): Add forgotten parameter definitions.
+ (overlay_manual_command, overlay_off_command): Likewise.
+ (overlay_load_command): Likewise.
+ * tracepoint.c (memrange_cmp): Parameters have type void *, not
+ struct memrange *.
+
+Tue Apr 28 11:08:25 1998 John Metzler <jmetzler@cygnus.com>
+
+ * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
+
+Mon Apr 27 14:32:21 1998 Mark Alexander <marka@cygnus.com>
+
+ * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
+ make it work on the simulator.
+ (FIX_CALL_DUMMY): Convert to function call instead of inline code.
+ (sparc_fix_call_dummy): Declare.
+ * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
+ old FIX_CALL_DUMMY macro, with additional fixes for simulator.
+ (sparc_push_dummy_frame): Set registers differently on simulator
+ to prevent corrupted register window save areas.
+
+Mon Apr 27 13:46:40 1998 John Metzler <jmetzler@cygnus.com>
+
+ * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
+ Convert all static initializations of monitor ops structures to
+ executable initializations in order that additions to the data
+ structure definition can me made without repeating this editing
+ exercise.
+ * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
+ * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
+ * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
+ * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
+ * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
+ * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
+ * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
+ * remote-est.c (_initialize_est, init_est_cmds): Ditto.
+ * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
+
+Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * gdb_string.h (strdup): Don't specify arguments in prototype.
+
+Sun Apr 26 07:57:21 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if
+ fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
+ to check for reference to the same file.
+
+ * target.c (target_read_string): Handle string transfers at the
+ end of a memory section gracefully.
+
+Fri Apr 24 17:18:56 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * Makefile.in: enable EXEEXT setting
+
+start-sanitize-r5900
+Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
+ GPR loads/stores generated on the r5900.
+ (mips_find_saved_regs, mips32_skip_prologue): Likewise.
+ * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
+ * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
+
+end-sanitize-r5900
+Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * README: Minor changes for 4.17 release.
+
+start-sanitize-java
+Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com>
+
+ * symfile.c (deduce_language_from_filename): .class implies java.
+
+end-sanitize-java
+Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>
+
+ * configure.in (strerror): Check if function must be declared.
+ * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
+ * gdb_string.h (strerror): Function declaration issued if
+ NEED_DECLARATION_STRERROR.
+ * configure, config.in : Files regenerated.
+
+Thu Apr 23 12:27:43 1998 Philippe De Muyter <phdm@macqel.be>
+
+ * symfile.c (simple_overlay_update_1): Do not prefix array address
+ by `&'.
+ * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
+ * tracepoint.c (encode_actions): Ditto.
+ * language.c, complaints.c, utils.c (varargs.h): Do not include that
+ file here, it is already included indirectly by defs.h.
+ * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
+ value to the appropriate pointer type.
+ * utils.c (floatformat_from_doublest): Ditto.
+ * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
+ (add_memrange): Likewise with xrealloc return value.
+ * stabsread.c (ref_add): Ditto.
+ * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
+ * elfread.c (elf_symfile_read): Ditto.
+ * os9kread.c (os9k_symfile_init): Ditto.
+
+Thu Apr 23 00:32:08 1998 Tom Tromey <tromey@cygnus.com>
+
+ * config.in: Rebuilt.
+ * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
+ HAVE_LC_MESSAGES): Define.
+
+Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com>
+
+ * configure: Rebuilt.
+ * configure.in: Call CY_GNU_GETTEXT.
+ * Makefile.in (top_builddir): New macro.
+ (INTL): Define to @INTLLIBS@.
+ (INTL_DEPS): New macro.
+ (CDEPS): Reference INTL_DEPS, not INTL.
+
+start-sanitize-sky
+Wed Apr 22 13:40:16 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * txvu-tdep.c (txvu_print_insn): Fix thinko.
+
+end-sanitize-sky
+Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ Handle missing shared libraries during the examination of a core
+ dump gracefully.
+ * solib.c (find_solib): Use catch_errors around call to
+ solib_map_sections. Use warning instead of error if reading of
+ the shared library name fails.
+ (solib_map_sections): Change return and argument types to make
+ it callable from catch_errors.
+ (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
+ * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
+ symbol_add_stub): Ditto.
+
+Wed Apr 22 14:34:49 1998 Michael Meissner <meissner@cygnus.com>
+
+ * Makefile.in (INTL*): Add support to link in the intl library,
+ and to add -I options to its source and object directories.
+ (INTERNAL_CFLAGS): Ditto.
+ (C{LIBS,DEPS}): Ditto.
+
start-sanitize-sky
Wed Tue 21 17:29:48 1998 Jim Lemke <jlemke@cygnus.com>
* configure.in: Add configure option --with-sim-funit.
* tracepoint.c (trace_status_command): Recognize a boolean return
value from the stub to indicate whether trace experiment is
- running. Export this value as a global state variable
+ running. Export this value as a global state variable.
(trace_running_p) for use by the GUI. (from Michael Snyder)
(trace_pass_command) added call to modify_tracepoint_hook.
- * tracepoint.h export trace_running_p
+ * tracepoint.h export trace_running_p.
start-sanitize-sky
Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
* Makefile.in: Derive SHELL from configure.
- * config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
+ * config/d10v/d10v.mt config/m32r/m32r.mt
config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
from SIM. This prevents dependency checking of -lm (under NT
native builds). (It is automatically added by configure if it
exists.)
+start-sanitize-d30v
+ * config/d30v/d30v.mt: Ditto.
+end-sanitize-d30v
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
- (hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
- second, update the UI, and loop around doing this until we have hit the real
- timeout or we get data or an error. This will allow the UI to stay active
- while gdb is "blocked" talking to the target.
- - Martin M. Hunt <hunt@cygnus.com>
- (wait_for): Do reset current_timeout
- because it is only used to keep track of what the
- current timeout for the scb is.
+ (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
+ every second, update the UI, and loop around doing this until we
+ have hit the real timeout or we get data or an error. This will
+ allow the UI to stay active while gdb is "blocked" talking to the
+ target.
+ - Martin M. Hunt <hunt@cygnus.com>
+ (wait_for): Do reset current_timeout because it is only used to
+ keep track of what the current timeout for the scb is.
* top.c
- Martin M. Hunt <hunt@cygnus.com>
Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
- * config/mips/tm-vr4xxx.h: implements vr4111 as saparate from 4300
+ * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
* config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
* configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
* dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
* Makefile.in (BISON): Don't even pretend to use yacc.
(c-exp.tab.o): Use bison -o to use a unique intermediate file.
- (jv-exp.tab.o, f-exp.tab.o, m2-exp.tab.o): Likewise.
+ (f-exp.tab.o, m2-exp.tab.o): Likewise.
+start-sanitize-java
+ (jv-exp.tab.o): Likewise.
+end-sanitize-java
Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>