+Sun Dec 3 02:28:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * ser-pipe.c (pipe_open): Only use vfork when available.
+ * fork-child.c (fork_inferior): Fix #ifdef HAVE_VFORK test.
+ (clone_and_follow_inferior): Ditto.
+
+ * configure.in (AC_CHECK_FUNCS): Check for vfork.
+ * configure, config.in: Regenerate.
+
+Sun Dec 3 01:54:49 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * ser-unix.c (wait_for): Initialize the FD_SET before every select
+ call.
+ (ser_unix_wait_for): Ditto.
+
+Sun Dec 3 01:01:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * Makefile.in (varobj.o): Delete special .c.o rule supressing
+ -Werror flag.
+
+Sun Dec 3 00:29:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * m32r-rom.c (m32r_load_section): Update to match
+ bfd_map_over_sections's ``func'' arg.
+
+Thu Nov 30 01:24:37 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * mips-tdep.c (struct upk_mips16): Delete fields ``inst'' and
+ ``fmt''. Make ``offset'' a CORE_ADDR.
+ (print_unpack): Delete.
+ (extended_offset): Construct and return a CORE_ADDR.
+ (fetch_mips_16): Return an int. Don't assume short is 16 bits.
+ (unpack_mips16): Rewrite. Add ``extension'' parameter instead of
+ incorrectly guessing if the instruction had an extension.
+ (map16): Delete array.
+ (mips16_op): Delete macro.
+ (extended_mips16_next_pc): Rewrite of old mips16_next_pc function.
+ When an extended instruction do a recursive call.
+ (mips16_next_pc): Call extended_mips16_next_pc.
+ (mips_next_pc): Cleanup.
+
+Sat Dec 2 10:40:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * ser-e7kpc.c (e7000pc_setstopbits): New function.
+ (e7000pc_ops): Add e7000pc_setstopbits.
+
+ * remote-e7000.c (e7000_detach, e7000_resume,
+ e7000_xfer_inferior_memory, e7000_files_info, e7000_files_info,
+ e7000_insert_breakpoint, e7000_remove_breakpoint, e7000_kill):
+ Update function signature to match target vector.
+
+ * h8300-tdep.c (h8300_command, h8300h_command, h8300s_command):
+ h8500-tdep.c (small_command, big_command, medium_command,
+ compact_command): Update function signature to match add_cmd.
+
+2000-12-01 Fernando Nasser <fnasser@redhat.com>
+
+ * p-exp.y: Define strncasecmp as strnicmp for MSVC.
+ (yylex): Use strncasecmp, not strnicmp.
+
+2000-12-01 Fernando Nasser <fnasser@redhat.com>
+
+ * cli/cli-decode.c: New file. Handle lists of commands, their decoding
+ and documentation.
+ (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd,
+ add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc,
+ add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd,
+ add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list,
+ help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1,
+ undef_cmd_error, lookup_cmd, deprecated_cmd_warning,
+ lookup_cmd_composition, complete_on_cmdlist, complete_on_enum):
+ Moved here from command.c.
+ (add_info, add_info_alias, add_com, add_com_alias): Moved here from
+ top.c.
+ * cli/cli-decode.h: Definitions/declarations for the above.
+ * cli/cli-cmds.c: New file. GDB CLI commands.
+ (error_no_arg, info_command, show_command, help_command, show_version,
+ quit_command, pwd_command, cd_command, echo_command, shell_escape,
+ make_command, show_user, set_debug, show_debug, init_cmd_lists):
+ Moved here from top.c.
+ (apropos_command): Moved here from command.c.
+ (complete_command, source_command): Moved here (part) from top.c.
+ (is_complete_command): New function. Checks if a command is the
+ "complete" command.
+ (init_cli_cmds): New function. Add commands to the CLI (from code
+ previously in top.c.
+ * cli/cli-cmds.h: Definitions/declarations for the above.
+ * cli/cli-script.c: New file. GDB CLI command scripting.
+ (build_command_line, get_command_line, print_command_lines,
+ print_command_line, execute_user_command, execute_control_command,
+ while_command, if_command, arg_cleanup, setup_user_args, locate_arg,
+ insert_args, realloc_body_list, read_next_line,
+ recurse_read_control_structure, read_command_lines, free_command_lines,
+ do_free_command_lines_cleanup, make_cleanup_free_command_lines,
+ validate_comname, user_defined_command, define_command,
+ document_command, source_cleanup_lines, do_fclose_cleanup,
+ show_user_1): Moved here from top.c.
+ (script_from_file): New function. Implements execution of a script
+ contained in a file (part of code for the source_command() that used
+ to exist in top.c).
+ * cli/cli-script.h: Definitions/declarations for the above.
+ * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands.
+ (parse_auto_binary_operation, parse_binary_operation,
+ do_setshow_command, cmd_show_list): Moved here from command.c.
+ * cli/cli-setshow.h: Definitions/declarations for the above.
+ * top.c: Remove all CLI code, except the command loop.
+ (gdb_init): Call init_cli_cmds().
+ * command.c: Remove obsolete file.
+ * command.h: Mark as DEPRECATED.
+ * gdbcmd.h: Ditto.
+ * call-cmds.h: Ditto.
+ * Makefile.in (SFILES): Remove command.c.
+ (COMMON_OBS): Remove command.o.
+ (command.o): Remove obsolete target.
+ (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros.
+ Refer to CLI header files.
+ (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets.
+ (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS,
+ SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN,
+ SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli
+ subdirectory.
+ * configure.in (enable_gdbcli): New option. Include the CLI in the
+ executable (cannot be disabled yet).
+ (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS,
+ CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add
+ the corresponding SUBDIR_CLI_* macros if CLI requested.
+ * configure: Regenerate.
+
+2000-10-27 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * p-exp.y (yylex): avoid problem with symbol name
+ starting as a operator name.
+
+2000-11-30 Fernando Nasser <fnasser@redhat.com>
+
+ * linespec.h: New file. Declarations for linespec.c.
+ * linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c,
+ symtab.c, tracepoint.c: Include the above.
+ * completer.c: New file. Line completion stuff for GDB.
+ (get_gdb_completer_word_break_characters,
+ get_gdb_completer_quote_characters): New functions. Accessors for
+ useful completer internal data.
+ (filename_completer, line_completion_function, skip_quoted): Moved
+ here from top.c.
+ * completer.h: New file. Declarations for the above.
+ * linespec.c (decode_line_1): Use
+ get_gdb_completer_word_break_characters and
+ get_gdb_completer_quote_characters.
+ * top.c: Include completer.h.
+ (filename_completer, line_completion_function, skip_quoted):
+ Moved to completer.c.
+ * corefile.c, exec.c, source.c, symfile.c, linespec.c: Include
+ completer.h.
+ * Makefile.in (SFILES): Add completer.c.
+ (COMMON_OBS): Add completer.o.
+ (completer.o): New target.
+ (linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o,
+ symtab.o, tracepoint.o): Add linespec.h to dependencies list.
+ (corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h
+ to dependencies list.
+
+Thu Nov 30 13:19:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdbarch.c: Regenerate.
+
+Thu Nov 30 01:14:21 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * varobj.c (varobj_create): Initialize ``old_fi''.
+ (varobj_update): Initialize ``templist''.
+
+ * kod-cisco.c (cisco_kod_request): Simplify allocation of
+ ``sync_ids'' eliminating uninitialized variable.
+
+2000-11-28 Mark Salter <msalter@redhat.com>
+
+ * MAINTAINERS: Add Mark Salter to Write After Approval list.
+
+Tue Nov 28 12:24:43 2000 Christopher Faylor <cgf@cygnus.com>
+
+ * win32-nat.c (dll_code_sections_add): strdup -> xstrdup.
+
+Mon Nov 27 11:45:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * remote.c (remote_write_bytes): Add default case to switch
+ initializing ``todo''. Ditto for ``nr_bytes''.
+ * top.c (catch_errors): Always initialize ``val''.
+ * solib.c (info_sharedlibrary_command): Handle bfd_get_arch_size
+ returning an unknown size.
+ * gdbtypes.c (count_virtual_fns): Always initialize ``vfuncs''.
+ * breakpoint.c (break_at_finish_at_depth_command_1): Initialise
+ extra_args to NULL.
+ (break_at_finish_command_1): Ditto.
+
+Mon Nov 27 11:27:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * TODO: Add GFDL updates to 5.1 release criteria.
+
2000-11-26 Nick Clifton <nickc@redhat.com>
* configure.tgt (xscale-*): Add.