+2018-09-09 Simon Marchi <simon.marchi@ericsson.com>
+
+ * python/py-prettyprint.c (pretty_print_one_value): Return
+ gdbpy_ref<>.
+ (print_string_repr): Adjust.
+ (apply_varobj_pretty_printer): Return gdbpy_ref<>.
+ * python/python-internal.h (apply_varobj_pretty_printer): Return
+ gdbpy_ref<>.
+ * varobj.c (varobj_value_get_print_value): Adjust.
+
+2018-09-08 Tom Tromey <tom@tromey.com>
+
+ PR python/16047:
+ * python/py-prettyprint.c (pretty_print_one_value): Check for
+ to_string method.
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (resolve_subexp): Pass correct OPLEN in call to
+ replace_operator_with_call.
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (ada_value_cast): Remove unnecessary parentheses.
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-typeprint.c (print_range): Print the bounds using TYPE
+ rather than its TYPE_TARGET_TYPE.
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (ada_to_fixed_value): Minor reformatting in
+ call to ada_to_fixed_value_create.
+
+2018-09-08 Jerome Guitton <guitton@adacore.com>
+
+ * ada-lang.c (ada_decode): strip dot prefix in symbol name.
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (ada_exception_sal): Replace gdb_assert calls
+ by calls to error.
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (ada_unhandled_exception_name_addr_from_raise):
+ Move update of loop variable "fi".
+
+2018-09-08 Joel Brobecker <brobecker@adacore.com>
+
+ * ada-lang.c (value_assign_to_component): In the case of
+ big-endian targets, extract the bits of the given VAL
+ using an src_offset of zero if container is not a scalar.
+
+2018-09-06 Simon Ser <contact@emersion.fr>
+
+ PR gdb/23105
+ * fbsd-nat.c (fbsd_nat_target::xfer_partial): Add support for
+ TARGET_OBJECT_FREEBSD_VMMAP and TARGET_OBJECT_FREEBSD_PS_STRINGS.
+ * fbsd-tdep.c (fbsd_make_note_desc): New.
+ (fbsd_make_corefile_notes): Write NT_PROCSTAT_AUXV,
+ NT_PROCSTAT_VMMAP and NT_PROCSTAT_PS_STRINGS notes.
+ * target.h (enum target_object) Add FreeBSD-specific
+ TARGET_OBJECT_FREEBSD_VMMAP and TARGET_OBJECT_FREEBSD_PS_STRINGS.
+
+2018-09-06 Simon Marchi <simon.marchi@ericsson.com>
+
+ * compile/compile-c.h (generate_c_for_variable_locations):
+ Change reference to pointer.
+ * compile/compile-c-support.c (compile_program) <compute>:
+ Likewise.
+ * compile/compile-c-symbols.c (generate_vla_size): Likewise.
+ (generate_c_for_for_one_variable): Likewise
+ (generate_c_for_variable_locations): Likewise
+ * compile/compile-c-types.c (compile_c_instance::convert_type):
+ Likewise
+ * compile/compile-cplus-symbols.c (convert_one_symbol):
+ std::move the scope passed to enter_scope.
+ * compile/compile-cplus-types.c
+ (compile_cplus_instance::enter_scope): Make parameter
+ rvalue-reference.
+ (compile_cplus_instance::new_scope): Change reference to
+ pointer.
+ (compile_cplus_instance::convert_type): Likewise
+ (compile_cplus_convert_typedef): std::move the scope passed to
+ enter_scope.
+ (compile_cplus_convert_struct_or_union): Likewise.
+ (compile_cplus_convert_enum): Likewise.
+ (compile_cplus_convert_namespace): Likewise.
+ * compile/compile-cplus.h (compile_cplus_instance)
+ <enter_scope>: Make parameter rvalue-reference.
+ * compile/compile-internal.h (compile_instance)
+ <get_cached_type>: Likewise
+ * compile/compile-loc2c.c (push): Likewise
+ (pushf): Likewise
+ (unary): Likewise
+ (binary): Likewise
+ (print_label): Likewise
+ (pushf_register_address): Likewise
+ (pushf_register): Likewise
+ (do_compile_dwarf_expr_to_c): Likewise
+ (compile_dwarf_expr_to_c): Likewise
+ (compile_dwarf_bounds_to_c): Likewise
+ * compile/compile.c (compile_instance::get_cached_type):
+ Likewise
+ * compile/compile.h (compile_dwarf_expr_to_c): Likewise.
+ (compile_dwarf_bounds_to_c): Likewise
+ * dwarf2loc.c (locexpr_generate_c_location): Likewise.
+ (dwarf2_compile_property_to_c): Likewise
+ * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise
+ * symtab.h (struct symbol_computed_ops) <generate_c_location>:
+ Likewise
+
+2018-09-06 Simon Marchi <simon.marchi@ericsson.com>
+
+ * tui/tui-data.h (struct tui_win_element) <highlight>: Remove.
+ * tui/tui-data.c (init_content_element): Don't initialize it.
+
+2018-09-06 Simon Marchi <simon.marchi@ericsson.com>
+
+ * tui/tui-data.h (struct tui_win_info)
+ <detail::opaque>: Remove.
+ * tui/tui-data.c (init_win_info): Remove assignment.
+
+2018-09-05 Tom Tromey <tom@tromey.com>
+
+ * warning.m4 (AM_GDB_WARNINGS): Add -Wformat when testing
+ -Wformat-nonliteral.
+ * target-float.c (host_float_ops<T>::to_string)
+ (host_float_ops<T>::from_string): Use
+ DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
+ * configure: Rebuild.
+
+2018-09-05 Simon Marchi <simon.marchi@ericsson.com>
+
+ * printcmd.c (printf_c_string): Use
+ DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
+ (printf_wide_c_string, printf_pointer, ui_printf): Likewise.
+
+2018-09-05 Tom Tromey <tom@tromey.com>
+
+ * cli/cli-cmds.c (shell_escape, edit_command): Remove cast.
+
+2018-09-05 Tom de Vries <tdevries@suse.de>
+
+ * dwarf2loc.c (sect_variable_value): Call indirect_synthetic_pointer
+ with resolve_abstract_p == true.
+ (indirect_synthetic_pointer): Add resolve_abstract_p parameter,
+ defaulting to false. Propagate resolve_abstract_p to
+ dwarf2_fetch_die_loc_sect_off.
+ * dwarf2loc.h (dwarf2_fetch_die_loc_sect_off): Add resolve_abstract_p
+ parameter, defaulting to false.
+ * dwarf2read.c (read_variable): Add variable to abstract_to_concrete.
+ (dwarf2_fetch_die_loc_sect_off): Add and handle resolve_abstract_p
+ parameter.
+ * dwarf2read.h (struct die_info): Forward-declare.
+ (die_info_ptr): New typedef.
+ (struct dwarf2_per_objfile): Add abstract_to_concrete field.
+
+2018-09-05 Joel Brobecker <brobecker@adacore.com>
+
+ GDB 8.2 released.
+
+2018-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
+ Pedro Alves <palves@redhat.com>
+
+ * gnulib/Makefile.in (aclocal_m4_deps): Move to
+ "aclocal-m4-deps.mk". Include file here.
+ $(srcdir)/aclocal.m4: Add "configure.ac".
+ * gnulib/aclocal-m4-deps.mk: New file.
+ * gnulib/update-gnulib.sh: Automatically update
+ "aclocal-m4-deps.mk".
+
+2018-09-04 Tom Tromey <tom@tromey.com>
+
+ * configure: Rebuild.
+ * configure.ac: Remove multi-ice code.
+
+2018-09-04 Tom Tromey <tom@tromey.com>
+
+ * Makefile.in (GDB_WARN_CFLAGS_NO_DEFS): Remove.
+ (ada-exp.o): Update.
+
+2018-09-04 Tom Tromey <tom@tromey.com>
+
+ * Makefile.in (printcmd.o, target-float.o): Remove.
+ (GDB_WARN_CFLAGS_NO_FORMAT): Remove.
+
+2018-09-04 Tom Tromey <tom@tromey.com>
+
+ * gnulib/Makefile.in: Remove obsolete comment.
+ * Makefile.in: Remove obsolete comment.
+
+2018-09-04 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * riscv-tdep.c (riscv_frame_cache): Fix ARI warning, don't end a
+ line with '+'.
+
+2018-09-03 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * riscv-tdep.c: Add 'prologue-value.h' include.
+ (struct riscv_unwind_cache): New struct.
+ (riscv_debug_unwinder): New global.
+ (riscv_scan_prologue): Update arguments, capture register details
+ from prologue scan.
+ (riscv_skip_prologue): Reformat arguments line, move end of
+ prologue calculation into riscv_scan_prologue.
+ (riscv_frame_cache): Update return type, create
+ riscv_unwind_cache, scan the prologue, and fill in remaining cache
+ details.
+ (riscv_frame_this_id): Use frame id computed in riscv_frame_cache.
+ (riscv_frame_prev_register): Use the trad_frame within the
+ riscv_unwind_cache.
+ (_initialize_riscv_tdep): Add 'set/show debug riscv unwinder'
+ flag.
+
+2018-09-03 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * trad-frame.h (trad_frame_set_realreg): Declare.
+ (trad_frame_set_addr): Declare.
+ * trad-frame.c (trad_frame_set_realreg): Define new function.
+ (trad_frame_set_addr): Define new function.
+ (trad_frame_set_reg_realreg): Use new function.
+ (trad_frame_set_reg_addr): Use new function.
+
+2018-09-01 Keith Seitz <keiths@redhat.com>
+
+ * compile/compile-cplus-types.c (compile_cplus_debug_output_1): Use
+ pulongest instead of "%lld".
+ * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol): Remove
+ ATTRIBUTE_UNUSED.
+
+2018-08-31 Tom Tromey <tom@tromey.com>
+
+ * dwarf2read.c (dwarf2_add_field): Set the TYPE_LENGTH of the
+ variant part type.
+
+2018-08-31 Pedro Alves <palves@redhat.com>
+
+ * gdbarch.h: Regenerate.
+
+2018-08-31 Pedro Alves <palves@redhat.com>
+
+ * gdbarch.sh (have_nonsteppable_watchpoint): Add comment.
+ * target.h (Hardware watchpoint interfaces): Describe
+ continuable/steppable/non-steppable watchpoints.
+ * gdbarch.h, gdbarch.c: Regenerate.
+
+2018-08-31 Pedro Alves <palves@redhat.com>
+
+ * nto-procfs.c (nto_procfs_target::have_continuable_watchpoint):
+ Delete.
+ * s390-linux-nat.c
+ (s390_linux_nat_target::have_continuable_watchpoint): Delete.
+ * target.h (target_ops::have_continuable_watchpoint): Delete.
+ (target_have_continuable_watchpoint): Delete.
+ * x86-nat.h (x86_nat_target::have_continuable_watchpoint): Delete.
+ * target-delegates.c: Regenerate.
+
+2018-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * gnulib/Makefile.in (aclocal_m4_deps): Update according to
+ the files present in "gnulib/import/m4/".
+
+2018-08-30 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * riscv-tdep.c (riscv_insn::decode): Decode c.addi4spn, c.sd,
+ c.sw, c.swsp, and c.sdsp.
+
+2018-08-30 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * riscv-tdep.c (struct riscv_inferior_data): Delete.
+ (riscv_read_misa_reg): Don't cache value read into inferior data.
+ (riscv_new_inferior_data): Delete.
+ (riscv_inferior_data_cleanup): Delete.
+ (riscv_inferior_data): Delete.
+ (riscv_invalidate_inferior_data): Delete.
+ (_initialize_riscv_tdep): Remove initialisation of inferior data.
+
+2018-08-30 Simon Marchi <simon.marchi@ericsson.com>
+
+ * compile/compile-cplus-types.c
+ (compile_cplus_instance::leave_scope): Take the address of scope
+ object.
+ (compile_cplus_instance::convert_qualified_base): Compare quals
+ to 0.
+
+2018-08-30 Keith Seitz <keiths@redhat.com>
+
+ * compile/compile-cplus-types.c (compile_cplus_instance::enter_scope):
+ Use "%s" and host_address_to_string instead of "%p" in printf.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * Makefile.in (SUBDIR_GCC_COMPILE_SRCS): Add compile-cplus-symbols.c
+ and compile-cplus-types.c.
+ (HFILES_NO_SRCDIR): Add gcc-cp-plugin.h.
+ * c-lang.c (cplus_language_defn): Set C++ compile functions.
+ * c-lang.h (cplus_get_compile_context, cplus_compute_program):
+ Declare.
+ * compile/compile-c-support.c: Include compile-cplus.h.
+ (load_libcompile): Templatize.
+ (get_compile_context): "New" function.
+ (c_get_compile_context): Use get_compile_context.
+ (cplus_get_compile_context): New function.
+ (cplus_push_user_expression, cplus_pop_user_expression)
+ (cplus_add_code_header, cplus_add_input, cplus_compile_program)
+ (cplus_compute_program): Define new structs/functions.
+ * compile/compile-cplus-symmbols.c: New file.
+ * compile/compile-cplus-types.c: New file.
+ * compile/compile-cplus.h: New file.
+ * compile/compile-internal.h (debug_compile_oracle, GCC_TYPE_NONE):
+ Declare.
+ * compile/compile-object-load.c (get_out_value_type): Use
+ strncmp_iw when comparing symbol names.
+ (compile_object_load): Add mst_bss and mst_data.
+ * compile/compile.c (_initialize_compile): Remove
+ -Wno-implicit-function-declaration from `compile_args'.
+ * compile/gcc-cp-plugin.h: New file.
+ * NEWS: Mention C++ compile support and new debug options.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (collect_info::add_symbol): Make virtual.
+ (struct symbol_searcher_collect_info): New struct.
+ (symbol_searcher::find_all_symbols): New method.
+ * symtab.h (class symbol_searcher): New class.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (struct linespec) <function_symbols, label_symbols>:
+ Change to vector of block_symbol. Update all users.
+ (struct collect_info) <symbols>: Likewise.
+ (collect_info::add_symbol): Take block_symbol as argument.
+ Update all callers.
+ (decode_compound_collector) <m_symbols>: Change type to vector
+ of block_symbol. Update all users.
+ (decode_compound_collector::operator ()): Change parameter type
+ to block_symbol.
+ (find_method, find_function_symbols, find_linespec_symbols)
+ (find_label_symbols_in_block, find_label_symbols): Change symbol
+ vectors to block_symbol vectors.
+ * symtab.h (symbol_found_callback_ftype): Change parameter type to
+ block_symbol.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (symbolp): Remove typedef and VEC definitions.
+ (bound_minimal_symbol_d): Likewise.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (decode_compound_collector::decode_compound_collector):
+ Remove initialization for `m_symtabs'.
+ (decode_compound_collector::release_symbols): Change return type
+ to std::vector. Update all callers.
+ (class decode_compound_collector) <m_symbols>: Change type to
+ std::vector.
+ (lookup_prefix_sym): Change return type to std::vector. Update all
+ callers.
+ (compare_symbols): Remove.
+ (std_compare_symbols): Rename to `compare_symbols'.
+ (find_method): Change `sym_classes' parameter to std::vector.
+ Update all callers. Use std::sort to sort sym_classes.
+ (find_linespec_symbols): Remove cleanup.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (struct linespec) <minimal_symbols>: Change type to
+ std::vector. Update all users.
+ (convert_linespec_to_sals): Use std::sort to sort minimal symbols.
+ (struct collect_info) <minimal_symbols>: Likewise.
+ (compare_msymbols): Return bool. Change parameters to const
+ bound_minimal_symbol references.
+ (find_method, find_function_symbols, find_linespec_symbols): Change
+ `minsyms' parameter to std::vector. Update all callers.
+
+2018-08-29 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (struct linespec) <label_symbols>: Change type to
+ std::vector. Update all users.
+ (find_label_symbols_in_block): Change `result' parameter to
+ std::vector. Update all callers.
+ (find_label_symbols): Return std::vector. Update all callers.
+
2018-08-29 Keith Seitz <keiths@redhat.com>
* linespec.c (struct linespec) <function_symbols>: Change type to
projects / deliverable / binutils-gdb.git / blobdiff