+Fri Oct 14 10:29:08 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * exec.c (map_vmap): Cast return from xmalloc to its proper type,
+ not to PTR.
+
+ * symfile.c (reread_symbols): Include bfd_errmsg string in error
+ message if bfd_close fails.
+ * exec.c (exec_close), solib.c (clear_solib), corelow.c
+ (core_close), objfiles.c (free_objfile), irix5-nat.c
+ (clear_solib), osfsolib.c (clear_solib), remote-utils.c
+ (gr_load_image): Check for errors from bfd_close.
+ * solib.c (look_for_base), remote-utils.c (gr_load_image),
+ remote-udi.c (download), corelow.c (core_open), symfile.c
+ (symfile_bfd_open), symfile.c (generic_load): Add comment
+ regarding error from bfd_close.
+ * remote-udi.c (download), remote-utils.c (gr_load_image): Add
+ comment about bogus handling of errors from bfd_openr.
+ * exec.c (exec_close): Add comment regarding memory leak and
+ dangling reference to vp->name.
+
+Sat Oct 15 03:43:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * eval.c (evaluate_subexp): Make fnptr a LONGEST instead
+ of using longest_to_int.
+
+ * infcmd.c (run_stack_dummy): Reinstate set_current_frame call,
+ mips and alpha targets need the real breakpoint pc for
+ creating the breakpoint frame.
+
+ * stack.c (return_command): Cast return value to the return
+ type of the function from which we return.
+ * values.c (set_return_value): Pass VALUE_CONTENTS unmodified
+ to STORE_RETURN_VALUE.
+
+ * symtab.c (lookup_symbol): Remove search for `static mangled
+ symbols', the search for `static symbols' already looks for
+ mangled and demangled symbols via lookup_block_symbol.
+
+ * valarith.c (value_binop): Use ANSI C arithmetic conversions
+ when performing integral evaluations, implement BINOP_EQUAL and
+ BINOP_LESS.
+ (value_equal, value_less): Use value_binop to perform the
+ comparison if both operands have TYPE_CODE_INT.
+
+ * rs6000-tdep.c (pop_frame): Make sure all registers are valid,
+ as they are written back later. Handle sp restore for frameless
+ functions. Use fdata.nosavedpc instead of fdata.frameless to
+ determine if the pc has been saved.
+ (function_frame_info): Handle `mr r31,r1', which is generated by
+ gcc-2.6, as a synonym for `oril r31,r1,0'.
+ (skip_trampoline_code): Handle shared library trampolines.
+ * xcoffread.c (read_xcoff_symtabs): Record XMC_GL symbols with
+ their real name. Enables setting of breakpoints in shared libraries
+ before the executable is run.
+
+Fri Oct 14 19:39:47 1994 Rob Savoye <rob@darkstar.cygnus.com>
+
+ * monitor.h, remote-mon.c: Hack up to so the old ROM monitor
+ interface code still works with the new ROM monitor
+ structures. Fake out a couple of fields.
+
+Fri Oct 14 14:54:37 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * h8500-tdep.c (target_read_sp, target_write_sp, target_read_pc,
+ target_write_pc, target_read_fp, target_write_fp): Rename to
+ h8500_read_sp, etc.
+ (h8500_read_pc, h8500_write_pc): Add pid argument.
+ * config/h8500/tm-h8500.h (TARGET_READ_SP, TARGET_WRITE_SP,
+ TARGET_READ_PC, TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP):
+ Change to match functions above.
+
+Thu Oct 13 13:24:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * NEWS: Add item about if and while.
+
+ * .gdbinit: Restore `end'; it was not excess. Reindent
+ list-objfiles to make this clear. Comment out all of
+ list-objfiles because old gdb's choke on it.
+
+Wed Oct 12 23:19:08 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * config/mips/tm-bigmips64.h: Just define TARGET_BYTE_ORDER and
+ include tm-mips64.h.
+
+Wed Oct 12 18:02:17 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * Makefile.in (ANNOTATE_OBS): New definition.
+ (COMMON_OBS): Add exec.o.
+ (annotate.o): Remove extra compile rule.
+ * config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists
+ everywhere.
+
+ * .gdbinit: Remove excess `end'.
+
+ * exec.c: Merge in RS6000 support from xcoffexec.c.
+ (symfile.h, objfiles.h, xcoffsolib.h): Include.
+ (vmap): New global variable.
+ (exec_close): Close and free objects in vmap chain.
+ (exec_file_command) [IBM6000_TARGET]: Set up initial vmap.
+ (bfdsec_to_vmap, map_vmap): Moved here from xcoffexec.c.
+ (exec_files_info): Print vmap information.
+ * xcoffexec.c: Remove.
+ * config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt
+ (TDEPFILES): Use exec.o instead of xcoffexec.o.
+ * TODO: Remove pertinent items.
+
+Wed Oct 12 10:08:19 1994 Jeff Law (law@snake.cs.utah.edu)
+
+ * partial-stab.h (N_TEXT): Delete GDB_TARGET_IS_HPPA kludge; they
+ are no longer needed as of gcc-2.6.0.
+
+Tue Oct 11 15:51:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * lynx-nat.c (child_wait): Correct handling of byte reversed SPARC
+ Lynx wait status.
+ (fetch_core_registers): Don't try to fetch a register if
+ regmap maps it to -1.
+ * sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0
+ and FRAME_SAVED_L0 when setting saved_regs_addr. SPARC Lynx
+ stores the registers in a weird order.
+
+Sat Oct 8 20:59:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * blockframe.c (reinit_frame_cache): Reinstate select_frame call
+ if inferior_pid is nonzero.
+
+Sat Oct 8 04:27:21 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ Speed up GDB startup time by not demangling partial symbols.
+ * symfile.h (ADD_PSYMBOL_VT_TO_LIST),
+ symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+ No longer demangle partial symbols.
+ * symtab.c (lookup_symbol, list_symbols): Handle mangled
+ variables, e.g. C++ static members, via the minimal symbols.
+
+ Handle reordered functions in an objfile, for Irix 5.2 shared
+ libraries.
+ * objfiles.h (OBJF_REORDERED): New bit in the objfile flags,
+ set if the functions in an objfile are reordered.
+ * mdebugread.c (parse_partial_symbols): Detect reordered
+ functions in an objfile.
+ * symtab.c (find_pc_psymtab, find_pc_symtab): Use expensive
+ lookup algorithm if the functions in the objfile are reordered.
+
+ * xcoffexec.c (exec_close): If the current target has a copy
+ of the exec_ops sections, reflect the freeing of the sections
+ in current_target.
+
+ * valops.c (call_function_by_hand): Use `sizeof dummy1', not
+ `sizeof dummy', for constructing the call dummy code.
+
+ * config/sparc/tm-sparc.h: Add PARAMS declarations to all
+ function declarations.
+ * sparc-tdep.c (sparc_pop_frame): Cast result of
+ read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
+
+ * irix5-nat.c (enable_break): Set breakpoint at the entry point
+ of the executable, to handle the case where main resides in a
+ shared library.
+ * irix5-nat.c (solib_create_inferior_hook): Reset stop_soon_quietly
+ after shared library symbol reading, to get rid of a warning from
+ heuristic_proc_start if the startup code has no symbolic debug info.
+
+ * breakpoint.h (struct breakpoint): Add new fields language
+ and input_radix, to enable breakpoint resetting with the
+ proper language and radix.
+ * breakpoint.c (set_raw_breakpoint): Initialize them.
+ (breakpoint_re_set_one): Use them when resetting the breakpoint.
+ (breakpoint_re_set): Preserve current language and input_radix
+ across breakpoint_re_set_one calls.
+
+ * symtab.c (decode_line_1): Do not build a canonical line
+ specification for `*expr' line specifications.
+
+ * breakpoint.h (bpstat_stop_status): Fix prototype declaration.
+
+Fri Oct 7 08:48:18 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ The point of these changes is to avoid reading the frame pointer
+ and stack pointer during stepping, to speed things up.
+ A. Changes to not select a frame until we need a selected frame:
+ * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
+ * infrun.c (wait_for_inferior): Move call to select_frame back to
+ normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
+ Law, but the change was my idea); the only reason for that change
+ was so we could save and restore the selected frame in
+ wait_for_inferior, and now that flush_cached frames clears the
+ selected frame, that should work OK now.
+ B. Changes to not create a current_frame until we need one:
+ * blockframe.c (get_current_frame): If current_frame is NULL, try
+ to create an innermost frame.
+ * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
+ infrun.c (wait_for_inferior), thread.c (thread_switch),
+ convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
+ alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
+ h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
+ hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
+ i960-tdep.c (pop_frame), m68k-tdep.c
+ (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
+ (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
+ (pop_frame), config/arm/tm-arm.h (POP_FRAME),
+ config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
+ (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
+ config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
+ (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
+ call create_new_frame.
+ * corelow.c (core_open), altos-xdep.c (core_file_command),
+ arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
+ m3-nat.c (select_thread), sun386-nat.c (core_file_command),
+ umax-xdep.c (core_file_command): Don't call create_new_frame; do
+ call flush_cached_frames.
+ * blockframe.c (reinit_frame_cache): Don't call create_new_frame
+ or select_frame.
+ C. Changes to get rid of stop_frame_address and instead only
+ fetch the frame pointer when we need it.
+ * breakpoint.c (bpstat_stop_status): Remove argument
+ frame_address; use FRAME_FP (get_current_frame ()).
+ * infrun.c (wait_for_inferior): Don't pass frame pointer to
+ bpstat_stop_status.
+ * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
+ ()) instead of stop_frame_address.
+ * infrun.c (save_inferior_status, restore_inferior_status),
+ inferior.h (struct inferior_status): Don't save and restore
+ stop_frame_address.
+ * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
+ (select_thread): Remove stop_frame_address and uses thereof.
+ D. Same thing for the stack pointer.
+ * infrun.c (wait_for_inferior): Remove stop_sp and replace
+ uses thereof with read_sp ().
+ E. Change to eliminate one nasty little spot where we were
+ wanting to know the frame pointer from before the current step
+ (idea from GDB 3.5, which saved my ass, because my other ideas of
+ how to fix it were very baroque).
+ * infrun.c: Remove prev_frame_address.
+ * infrun.c (wait_for_inferior, step_over_function): Use
+ step_frame_address instead of prev_frame_address.
+ F. Same basic idea for the stack pointer.
+ * inferior.h, infcmd.c: New variable step_sp.
+ * infcmd.c (step_1, until_next_command): Set it.
+ * infrun.c: Remove prev_sp and replace uses by step_sp.
+ * infrun.c (wait_for_inferior): If we get out of the step
+ range, then set step_sp to the current stack pointer before we
+ start going again.
+
+Fri Oct 7 12:17:17 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * top.c (target_byte_order_auto): New static variable.
+ (set_endian): Mention that ``auto'' is permitted.
+ (set_endian_auto): New static function.
+ (show_endian): Change message based on target_byte_order_auto.
+ (set_endian_from_file): New function.
+ (init_main): Add command ``auto'' to endianlist.
+ * exec.c (exec_file_command): Call set_endian_from_file.
+ * defs.h (set_endian_from_file): Declare.
+
+Thu Oct 6 18:10:41 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
+
+ * nlm/i386.c (flush_i_cache): New function, does nothing.
+ (frame_to_registers, registers_to_frame, set_step_traps,
+ clear_step_traps, do_status): Make non-static.
+
+Thu Oct 6 12:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * config/mips/tm-mips.h (GDB_TARGET_IS_MIPS64): If not already
+ defined, define as 0.
+ (FIX_CALL_DUMMY): Rewrite to remove presumption that host and
+ target are similar.
+ * config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+ * config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+ * config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+ (BREAKPOINT): Remove definition.
+ * config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+ (BREAKPOINT): Remove definition.
+ * config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a
+ value of 1, rather than without a value.
+ * config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise.
+ * mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
+ run time rather than at compile time.
+
+ * remote-mips.c (break_insn): Remove.
+ (BREAK_INSN, BREAK_INSN_SIZE): Define.
+ (mips_insert_breakpoint): Use BREAK_INSN, not break_insn.
+ (mips_remove_breakpoint): Likewise.
+
+ * defs.h: If TARGET_BYTE_ORDER_SELECTABLE is defined by tm.h,
+ define TARGET_BYTE_ORDER as target_byte_order, and declare
+ target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
+ a test of TARGET_BYTE_ORDER.
+ * top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
+ defined:
+ (endianlist, target_byte_order): New variables.
+ (set_endian, set_endian_big, set_endian_little): New functions.
+ (show_endian): New function.
+ (init_cmd_lists): Initialize endianlist.
+ (init_main): Add commands ``set endian big'', ``set endian
+ little'', and ``show endian''.
+ * a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
+ BITS_BIG_ENDIAN to switch at run time rather than at compile time.
+ * coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
+ * remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
+ * values.c: Likewise.
+
+Wed Oct 5 11:41:24 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
+
+ * nlm/configure.in: ${gdb_host_cpu} defaults to ${host_cpu}.
+
+ * nlm/Makefile.in: Get rid of NWINCLUDES.
+ * config/{alpha,powerpc}/gdbserve.mt: Remove NWINCLUDES.
+ User should now configure with --with-headers.
+
+Mon Oct 3 07:48:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * gdbserver/server.c (main): Silently accept all unrecognized
+ requests and send back a zero length acknowledge. That is what
+ *-stub.c do and is what remote.c expects.
+
+Mon Oct 3 05:11:47 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * corelow.c (core_open): Copy the modified to_sections_end
+ vector from current_target to core_ops too.
+
+ * gdbserver/server.c (main): Silently accept query requests
+ and send back a zero length acknowledge.
+
+Fri Sep 30 17:17:21 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
+
+ * nlm/Makefile.in: Don't define NWINCLUDES.
+ * config/{alpha,powerpc}/gdbserve.mt: define NWINCLUDES.
+
+Fri Sep 30 15:59:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * gdbserver/low-lynx.c (create_inferior): Pass all 4 args to ptrace.
+
+Fri Sep 30 06:42:42 1994 Ian Lance Taylor (ian@cygnus.com)
+
+ * lynx-nat.c (child_wait): Use status.w_status, not status, in
+ arithmetic. status is a `union wait'.
+
+ * config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char *.
+
+ * lynx-nat.c (child_wait): Pass fourth argument to ptrace.
+
+Thu Sep 29 08:22:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * xcoffread.c (read_xcoff_symtab): Fix comment for yesterday's change.
+
+Wed Sep 28 17:48:18 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * coffread.c (complete_symtab): If last_source_file is set upon
+ entry, free it.
+
+Wed Sep 28 08:59:14 1994 Jim Kingdon (kingdon@cygnus.com)
+
+ * xcoffread.c (read_xcoff_symtab, case C_FILE):
+ Set main_aux before using it.
+
+ * xcoffexec.c (exec_close): If quitting, don't call clear_symtab_users.
+
+ * xcoffread.c (read_xcoff_symtab): Process XTY_LD symbols we were
+ ignoring before. But continue to ignore XMC_DS.
+
+Mon Sep 26 02:59:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * defs.h (misc_command_type): Remove trailing comma from
+ enumerator list.
+
+Sun Sep 25 23:19:58 1994 Jeff Law (law@snake.cs.utah.edu)
+
+ * hppa-tdep.c (frame_saved_pc): Fix thinko in code to dig saved pc
+ out of an interrupt frame.
+
+Sun Sep 25 12:50:17 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if
+ defined.
+ * values.c (unpack_double) [INVALID_FLOAT]: Ditto.
+ * mips-tdep.c (mips_print_register): Don't test float validity.
+ * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
+ config/arm/tm-arm.h, config/convex/tm-convex.h,
+ config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+ config/i386/tm-i386v.h, config/i386/tm-sun386.h,
+ config/i960/tm-i960.h, config/m68k/tm-m68k.h,
+ config/m88k/tm-m88k.h, config/mips/tm-mips.h,
+ config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
+ config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
+ config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+ config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
+ config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT):
+ Remove definition.
+
+Sun Sep 25 06:07:37 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * TODO: Remove item about adding general multi-threaded stuff;
+ this is done.
+ Remove item about specifying arbitrary locations of stack frames
+ (this works on some machines).
+ Remove item about debugging functions without a frame pointer
+ (this works on some machines).
+ Remove item about re-writing macros which handle frame chaining and
+ frameless functions. They have been re-written at least once
+ since that item was written.
+ Remove item about gdb catching SIGINT when attached; this is done.
+ Remove item about having list_command not read symbols--why bother?
+
+Sat Sep 24 17:40:10 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * TODO: Append contents of Projects file.
+ * Projects: Remove.
+
+Sat Sep 24 01:47:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * corelow.c (add_solib_stub): Remove copying of to_sections,
+ pass current_target to SOLIB_ADD. The Sep 10 change failed
+ if SOLIB_ADD errored out, or if SOLIB_ADD was trying to access
+ target memory.
+ * corelow.c (core_open): After reading the shared libraries,
+ copy the modified to_sections vector from current_target to
+ core_ops, so that core_close can free it later.
+ * config/rs6000/nm-rs6000.h, rs6000-nat.c (xcoff_relocate_core):
+ Pass down target parameter from SOLIB_ADD and use it instead of
+ directly accessing core_ops.
+
+Fri Sep 23 14:58:49 1994 J.T. Conklin (jtc@rtl.cygnus.com)
+
+ * solib.c: *BSD systems need <a.out.h> to be included before
+ <link.h>.
+
+ * i386b-nat.c: Add i386_float_info(), etc.
+ * config/i386/nm-nbsd.h: #define FLOAT_INFO.
+
+ * config/nm-nbsd.h: New file, for generic NetBSD native support.
+ * config/i386/nm-nbsd.h: Use it.
+ * config/sparc/nm-nbsd.h: Use it.
+ * config/ns32k/nm-nbsd.h: Use it.
+
+ * configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
+ (ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
+ * config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
+ New files, support for NetBSD/i386.
+ * config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
+ New files, support for NetBSD/ns32k.
+
+Tue Sep 20 11:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * .gdbinit: Add list-objfiles command.
+
+ * TODO: Reword item regarding NO_STD_REGS.
+
+ * coffread.c (record_minimal_symbol, coff_read_enum_type,
+ coff_read_struct_type): Allocate on symbol_obstack, not directly
+ via malloc/savestring.
+
+Tue Sep 20 15:42:02 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * TODO: Add more items.
+ * tests: Remove the directory and all of its (obsolete) contents.
+
+Tue Sep 20 11:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * coffread.c (init_stringtab): When copying length to stringtab,
+ use target format, not host format, since that is what the rest of
+ the code assumes.
+
+Mon Sep 19 15:48:10 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
+
+ * Makefile.in: Removed prelude.o, i386-nlmstub.o, nlmstub.o,
+ nlmstub.nlm, and nlmstub targets. Removed NWSOURCE and
+ NWINCLUDES definitions.
+ * i386-nlmstub.c: Removed.
+
+Mon Sep 19 07:48:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * dbxread.c (read_dbx_dynamic_symtab): Cast bfd_asymbol_name to
+ char * (from const char *) before assigning. Don't save string we
+ pass to record_minimal_symbol (it already saves it).
+
+Sat Sep 17 17:05:14 1994 Stu Grossman (grossman@cygnus.com)
+
+ * gdbtk.tcl: Let ^U delete lines in the command window.
+
+Sat Sep 17 02:26:58 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * cp-valprint.c (static_field_print): New variable, controls
+ printing of static members.
+ (_initialize_cp_valprint): New print set subcommand
+ "static-members". Turn on printing of static members by default.
+ (cp_print_value_fields): Print static members if necessary.
+
+ * solib.c: Remove inclusion of libelf.h and elf/mips.h.
+ (elf_locate_base): Use only standard BFD functions to collect
+ information about the .dynamic section. Check for DT_MIPS_RLD_MAP
+ tag only if it got defined via the inclusion of <link.h>.
+
+ * f-exp.y: Write block for OP_VAR_VALUE.
+ * f-valprint.c (info_common_command): Handle `info common'
+ without an argument correctly.
+
+ * c-typeprint.c (c_type_print_base): Handle template constructors.
+ * symtab.c (gdb_mangle_name): Handle template method mangling,
+ get rid of GCC_MANGLE_BUG code, which only applied to gcc-2.2.2.
+
+Fri Sep 16 16:06:08 1994 Per Bothner (bothner@kalessin.cygnus.com)
+
+ * gdbtypes.h (TYPE_INDEX_TYPE): New macro.
+ * ch-typeprint.c, ch-valprint.c: Use TYPE_INDEX_TYPE.
+ * ch-valprint.c (chill_val_print): Pass index type directly
+ (instead of its TYPE_TARGET_TYPE) to print_type_scalar.
+ * stabsread.c (read_type): Don't set TYPE_FLAG_TARGET_STUB
+ if the index type is a stub.
+
+Fri Sep 16 17:18:44 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * config/i386/{i386aix.mh, i386bsd.mh, i386lynx.mh, i386sco.mh,
+ i386sco4.mh, i386sol2.mh, i386v.mh, i386v32.mh, i386v4.mh,
+ ncr3000.mh, ptx.mh, ptx4.mh}, config/m68k/{altos.mh, apollo68v.mh,
+ delta68.mh, dpx2.mh, hp300bsd.mh, hp300hpux.mh, m68klynx.mh,
+ m68kv4.mh}, config/m88k/{delta88.mh, delta88v4.mh},
+ config/mips/riscos.mh, config/pa/hppahpux.mh,
+ config/rs6000/rs6000lynx.mh, config/sparc/{sparclynx.mh,
+ sun4sol2.mh}, config/tahoe/tahoe.mh, config/vax/{vaxbsd.mh,
+ vaxult.mh, vaxult2.mh} (REGEX, REGEX1, SYSV_DEFINE): No longer
+ define.
+ * config/i386/i386sco4.mh (MUNCH_DEFINE): No longer define.
+
+Fri Sep 16 15:40:34 1994 Stu Grossman (grossman@cygnus.com)
+
+ * defs.h (QUIT): Call interactive_hook to allow GUI to interrupt.
+ Also, add decl for symtab_to_filename.
+ * gdbtk.c: Replace calls to full_filename with symtab_to_filename.
+ * gdbtk.tcl: New routine pc_to_line replaces in line code. New
+ routine decr replaces in line code.
+ * (create_file_win): Use catch to handle open failures more
+ elegantly. Also, create special window to display file open
+ failure message. Move opening of file prior to creation of text
+ widget.
+ * (create_asm_win): Add PC as argument. We now base disassembly
+ on PC instead of function name, since function names can be
+ ambiguous (usually seen with shared libs). Also, use catch to
+ simplify code where we don't care about failures.
+ * source.c (symtab_to_filename): New. Returns the file
+ associated with a symtab.
+ * top.c: Define interactive_hook. Called during QUIT to animate
+ the GUI.
+
Fri Sep 16 00:14:40 1994 Per Bothner (bothner@kalessin.cygnus.com)
+ * stabsread.c (read_type): Handle stub types for bitstrings.
+ * stabsread.c (read_array_type): Check for stub domain type
+ using TYPE_FLAG_STUB, not its length.
+ * gdbtypes.c (create_set_type): Handle a stub domain type.
+
* ch-exp.y: Get rid of some extra non-terminals, and move
their rules into primitive_value.
- * ch-lang.c (chill_op_print_tab): Add '->'.
+ * parser-defs.h: Add comment about unary postfix operators.
+ * ch-lang.c (chill_op_print_tab): Add '->', postfix and prefix.
* expprint.c (print_subexp): Recognize unary postfix operator.
Wed Sep 14 18:27:42 1994 Jason Molenda (crash@phydeaux.cygnus.com)