+Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * rem-multi.shar: Removed; superceded by gdbserver.
+
+Fri Apr 14 12:10:24 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
+ with coffread.c.
+
+ * breakpoint.c (fixup_breakpoints): Removed.
+ * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
+ (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
+
+ * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
+ sections, not just SECT_OFF_MAX-1.
+
+ * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
+ to be indexed by SECT_OFF_* instead of xcoff section numbers.
+ * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
+ * symtab.h: Revise comment about block_line_section.
+ * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
+
+Sat Apr 15 14:15:14 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-make.in (init.c): Don't try to do symbolic {o} in sed
+ command, not allowed by some version of MPW Make.
+ * ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
+
+Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
+ VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
+ TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
+
+Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
+
+ * alpha-tdep.c (alpha_push_arguments): Only cast to long for
+ TYPE_CODE_INT.
+
+start-sanitize-gdbtk
+Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * gdbtk.c (gdb_disassemble): Read from inferior if connected
+ to a VxWorks target.
+
+Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com)
+
+ * README.GDBTK: New file. Contains the obvious.
+end-sanitize-gdbtk
+
+Thu Apr 13 16:17:04 1995 Rob Savoye <rob@darkstar.cygnus.com>
+
+ * remote-array.c: New file for Array Tech LSI33k based controller
+ board.
+
+Thu Apr 13 12:23:31 1995 Kung Hsu <kung@rtl.cygnus.com>
+
+ * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
+ extract_address.
+ * remote-vxsparc.c: New file, preliminary check in, this configuration
+ not supported yet.
+ * remote-vxmips.c: ditto.
+
+Thu Apr 13 12:10:14 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
+ to declare the function.
+
+Wed Apr 12 16:40:20 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * monitor.h (init_monitor_ops): Declare.
+ * rom68k-rom.c: Clarify some comments.
+ (rom68k_open): Define as static, to match decl.
+
+Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * gdb.gdb: New file.
+ * .gdbinit: Move list-objfiles to gdb.gdb.
+
+ * values.c (set_internalvar): Set modifiable flag of newval.
+
+Wed Apr 12 14:34:31 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * xcoffread.c: Call complain() rather than error() or printing a
+ warning.
+
+start-sanitize-arc
+Wed Apr 12 08:15:27 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * arc-tdep.c: #include "gdbcmd.h".
+ (codestream_seek): Pass CORE_ADDR.
+ (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
+ (debug_pipeline_p): Likewise.
+ (X_...): Instruction field access macros.
+ (BUILD_INSN): Define.
+ (codestream_tell): Allow for stream elements > 1 byte.
+ (codestream_fill): Likewise.
+ (setup_prologue_scan): New function.
+ (arc_get_frame_setup): Call it. Update to current spec
+ regarding prologues. Use BUILD_INSN.
+ (skip_prologue): New argument `frameless_p'. Use BUILD_INSN.
+ (arc_frame_saved_pc): New function.
+ (frame_find_saved_regs): Use BUILD_INSN.
+ (get_insn_type, single_step): New functions.
+ (one_stepped): New global.
+ (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
+ (arc_set_cpu_type): New function.
+ (_initialize_arc_tdep): Define new `set' commands `cpu',
+ `displaypipeline', and `debugpipeline'.
+ * remote-arc.c (break_insn): Add bi-endian support.
+ (arc_insert_breakpoint): Likewise.
+ (arc_remove_breakpoint): Likewise.
+ (switch_command): Delete.
+ * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
+ (TARGET_BYTE_ORDER_SELECTABLE): Define.
+ (DEFAULT_ARC_CPU_TYPE): Define.
+ (SKIP_PROLOGUE_FRAMELESS_P): Define.
+ (BREAKPOINT): Delete.
+ (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
+ (DECR_PC_AFTER_BREAK): Change to 8.
+ (NO_SINGLE_STEP): Define.
+ (ARC_PC_TO_REAL_ADDRESS): Define.
+ (SAVED_PC_AFTER_CALL): Use it.
+ (NUM_REGS, REGISTER_BYTES): Fix.
+ (FRAME_SAVED_PC): Call arc_frame_saved_pc.
+ (FRAME_LOCALS_ADDRESS): Fix.
+end-sanitize-arc
+
+Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * top.c, utils.c, defs.h: Remove error_hook. It is currently
+ unused and would need to hook into error_begin()/return_to_top_level(),
+ instead of error(), if it were to be used.
+
+Tue Apr 11 13:46:25 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * utils.c, defs.h (warning_begin): Renamed from warning_setup, for
+ consistency with error_begin. Also print warning_pre_print.
+ Document it better.
+ * utils.c (warning): Use it.
+ * utils.c (error_begin): Doc fix.
+ * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
+ symfile_objfile, nuke it.
+
+Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * printcmd.c (print_address_numeric): Pass use_local to
+ print_longest, rather than always passing 1.
+
+ * nlm/Makefile.in: Remove comments discussing munch.
+
+start-sanitize-gdbtk
+Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
+ F_SETOWN is, use that.
+end-sanitize-gdbtk
+
+Mon Apr 10 18:31:57 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ Merge in support for Mac MPW as a host.
+ (Old change descriptions retained for informational value.)
+
+ * mpw-config.in (i386-unknown-go32): Change from aout.
+ (sh-hitachi-hms): New target.
+ * mpw-make.in (BISON): Use byacc instead of bison.
+ (VERSION): Bump to 4.14.1.
+ (*-pinsn.*): Remove mentions everywhere.
+ (all): Don't build MacGDB.
+ (gdb, SiowGDB): Depend on Version.r.
+ (Version.r): Generate from version info.
+ * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
+ (main) [MPW]: Remove debugging hook.
+ * mac-xdep.c (debug_openp): New flag.
+ (mac_init): Set flag if env variable defined.
+ * ser-mac.c (mac_open): Clarify error message.
+ (mac_readchar): Call PROGRESS while looping.
+ (mac_write): Call sleep instead of sec_sleep.
+ (sec_sleep): Remove.
+ * source.c (openp) [MPW]: Only print debugging info if debugging.
+ * utils.c (query) [MPW]: Clarify that behavior is a bug.
+
+ * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
+
+ * main.c, source.c: Remove hacks that replace long strings
+ with shorter ones, now solved portably.
+
+ * config/m68k/xm-mpw.h (spin.h): Include.
+ (ALMOST_STDC): Only define if MPW_C.
+ * config/m68k/tm-mac.h: New file, Mac target definitions.
+
+ * mpw-config.in (m68k-apple-macos, ppc-apple-macos,
+ i386-unknown-aout): New targets.
+ (mk.tmp): Add *DEPFILES definitions.
+ * mpw-make.in: Remove gC rules, clean up definitions for other
+ include files, bump version, fix bogus \ that should be \Option-d.
+ (init.c): Build correctly.
+
+ * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
+ (ALLDEPFILES): Add somsolib.c.
+ (somsolib.o): Add some dependencies.
+
+ * mpw-config.in: Use nm-empty.h if host is not target.
+ (xdepfiles): Add mac-xdep.c.o.
+ (xm_file): Remove.
+ * mpw-make.in: Add Fortran files.
+ (XDEPFILES): Remove.
+
+ * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
+ * ser-mac.c (MacSerial.h): Include instead of Serial.h.
+
+ * mpw-make.in: Use {s} instead of {srcdir} everywhere.
+ (bindir, libdir): Remove extra colon.
+ (source.c): Compile with C instead of gC.
+ (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
+ (install-only): Don't install MacGDB.
+ * source.c (openp) [MPW]: Add a debugging display.
+ (open_source_file) [MPW]: Use MPW basename finders.
+ [MPW_C]: Briefer versions of help for line and list commands.
+
+ * mpw-make.in: Change references from paread.c to somread.c
+
+ * mpw-make.in (VERSION): Update to 4.12.3.
+ (SiowGDB): New target, GDB using SIOW library.
+ (init-new.c): New target, attempt to generate init.c from sources.
+ (main.c.o, top.c.o): Put each in its own segment.
+ * main.c (main) [MPW]: Always call mac_init.
+ * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
+ an extra newline otherwise.
+ * mac-xdep.c: More comments in various places, remove junk.
+ (mac_init): Add tests for MPW and SIOW.
+ (use_wne, has_color_qd): Renamed.
+ (use_color_qd): New variable.
+ (grow_window): Only do console resizing to console window,
+ call resize_console_window.
+ (zoom_window): Call resize_console_window.
+ (resize_console_window, scroll_text): New functions.
+ (adjust_console_sizes): Always align viewrect to even multiples of
+ text lines.
+ (adjust_console_text): Always scroll by whole lines.
+ (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
+ recalculation of scroll positions if a newline was output.
+ (hacked_fflush): Similarly, for flushing.
+ (hacked_fgetc): New function, aborts if called in MacGDB.
+ * ser-mac.c (mac_readchar): Rename starttime to start_time,
+ remove debugging printf.
+ (mac_write): Sleep on first 4 writes.
+ (sec_sleep): New function, works like standard sleep.
+ * macgdb.r: Adjust positioning and contents of About box.
+ Set minimum size to 2000K, preferred size to 5000K.
+ * config/m68k/xm-mpw.h (fgetc): Define as a macro.
+
+ * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
+ (top.c.o, annotate.c.o): Add build rules.
+ * macgdb.r (SysTypes.r): Include.
+ ('vers'): New resource, version info.
+ (mFile, mEdit, mDebug): Enable all menu items.
+ (mDebug): Add key equivalents for continue, step, next.
+ (wConsole): Add zoom and close boxes to window.
+ * mac-xdep.c (new_console_window): New function, code taken from
+ mac_init.
+ (mac_command_loop): Use GetCaretTime for wait interval, call
+ do_idle on null events.
+ (do_idle): New function.
+ (zoom_window): Implement zooming.
+ (v_scroll_proc): New function, handles vertical scrolling.
+ (activate_window): Do activation of console window.
+ (do_menu_command): Implement items of file, edit, and debug menus.
+ (do_keyboard_command): Fix command extraction.
+ (adjust_console_sizes, adjust_console_text): New functions.
+ (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
+ hacked_putc): Don't call draw_console.
+ * ser-mac.c (mac_open): Add an error message for invalid ports.
+ (first_mac_write): New global.
+ (mac_write): Use first_mac_write to sleep on first several writes.
+
+ * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
+ (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
+ (TSOBS): Don't compile inflow.c.
+ (all, install): Add MacGDB.
+ * main.c (main): Do Mac-specific init and command loop if a
+ standalone app, skip full option help message if compiling
+ with MPW C.
+ (gdb_readline): If MPW, add a newline after the (gdb) prompt.
+ * utils.c (_initialize_utils): If MPW, don't try to use termcap to
+ compute the window size.
+ * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
+ fflush): Define as macros that expand into hacked_... versions.
+ (StandAlone, mac_app): Declare.
+ * macgdb.r (SIZE): Set the default partition to 4000K.
+ * mac-xdep.c (readline.h, history.h): Include.
+ (terminal.h): Don't include.
+ (mac_app): Define.
+ (gdb_has_a_terminal): Define Mac-specific version.
+ (do_keyboard_command): Simplify search for command string.
+ (readline): Define as gdb_readline.
+ Add other history/readline stubs to make main gdb link.
+ (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
+ hacked_fputc, hacked_fflush): New functions, intercept output to
+ stdout and stderr, send to console window.
+
+ * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
+ (XDEPFILES): Define.
+ (main.c.o): Compile with gC instead of C.
+ * mac-defs.h: New file, menu etc definitions shared between
+ C and Rez files.
+ * macgdb.r: New file, Rez (resource compiler) resource
+ definitions.
+ * mac-xdep.c: New file, Mac host interface code.
+ * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
+ DIRNAME_SEPARATOR.
+ (PATHNAME_SEPARATOR_STRING): Remove.
+ (SIGQUIT, SIGHUP): Define.
+ (fileno, R_OK): Define.
+
+ * mpw-config.in: New file, MPW configuration fragment.
+ * mpw-make.in: New file, MPW makefile fragment.
+ * config/m68k/xm-mpw.h: New file, MPW host definitions.
+ * ser-mac.c: New file, Mac serial interface.
+
+Mon Apr 10 16:47:57 1995 Kung Hsu <kung@mexican.cygnus.com>
+
+ * valprint.c (print_longest): Fix a syntax error in #ifdef
+ PRINTF_HAS_LONG_LONG.
+
+ * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and
+ PRINTF_HAS_LONG_LONG.
+ * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
+
+Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mdebugread.c (parse_symbol): Use new variable
+ nodebug_var_symbol_type as type of variables which don't have any
+ ecoff debug info associated with them.
+ (parse_symbol, parse_procedure): Use heuristics to determine if
+ functions were compiled without debugging info and change their
+ type to nodebug_function_symbol_type.
+ (_initialize_mdebugread): Initialize nodebug_*_symbol_type.
+
+ * source.c (line_info): Clear sal.pc for `info line' without
+ arguments.
+
+Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com)
+
+ * monitor.c: make_xmodem_packet and print_xmodem_packet go away.
+ send_xmodem_packet shows up to do the obvious. Lots of fixes to
+ xmodem downloads including resetting of block number at start of
+ new transfers, fix for buffer overrun problem, addition of CRC
+ generation code.
+ * (monitor_open): loadtype_str and loadproto_str now default to
+ first entry in monitor_ops->loadtypes.
+ * (monitor_wait): Lengthen register dump buf, because of verbose
+ Winbond monitor.
+ * (monitor_fetch_register): Report unimplemented registers as 0.
+ * (monitor_read_memory): Only do 16 byte aligned transfers
+ because of formatting weirdness with the Winbond monitor. Also,
+ ignore non-hex, non-whitespace formatting between bytes (same
+ monitor).
+ * (monitor_load): Clean up logic.
+ * (monitor_load_srec): Re-do xmodem support. Move lots of it
+ into send_xmodem_packet.
+ * (getacknak): Get rid of polls and timeouts. Handle CRC
+ requests from receiver.
+ * (monitor_make_srec): Efficiency improvements. Don't call
+ sprintf to output two digit hex numbers.
+ * (crcinit, docrc): New, CRC-16 support routines.
+ * (send_xmodem_packet): New routine to generate either CRC-16 or
+ checksummed xmodem packets.
+
+ * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
+ Reduce tables down to only the load types supported by each
+ monitor.
+
+ * w89k-rom.c (w89k_supply_register): Parses output of Winbond
+ register dumps.
+ * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
+ * (w89k_cmds): Add clear all breakpoints, memory fill, and dump
+ registers commands.
+
+ * config/pa/tm-hppa.h: Define lots register offsets needed by
+ w89k-rom.c.
+
+Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in (X11_INCLUDES): Define as empty.
+ (X11_CFLAGS): Define as including $(X11_INCLUDES).
+ (X11_LIB_SWITCHES): Define as empty.
+ (X11_LIBS): Define as -lX11.
+
+start-sanitize-gdbtk
+ * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
+ and --x-libraries switches, setting the X11_INCLUDES and
+ X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11
+ in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
+
+ * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
+ it. This means that the stop button doesn't work, but is better
+ than nothing.
+end-sanitize-gdbtk
+
+Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * mips-tdep.c (mips_print_register): Remove unused variable
+ our_type and call to init_type. Fixes memory leak. Reindent function.
+
+ * mips-tdep.c (mips_print_register), findvar.c
+ (write_register_bytes): Make buffer char[] instead of unsigned
+ char[].
+
+Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
+ variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
+ (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint
+ print sym") could output extraneous stuff.
+ * objfiles.c: Don't declare error_pre_print; defs.h does it.
+
+Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com)
+
+ * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag.
+ * monitor.c (monitor_read_memory): Use previously mentioned flag
+ to send proper format memory examine commands to the w89k monitor.
+ Also, try to handle bizarre format of memory dump...
+
+ * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.
+
+Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
+ Handle relocated symbol address.
+ * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
+ Do not relocate a zero address.
+
+Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
+ is nowhere used.
+
+ * stabsread.c (read_range_type): Remove FIXME comment about
+ type-id (I presume this meant a number followed by = followed by a
+ type) versus type number; Per fixed it.
+
+Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com)
+
+ * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
+
Wed Mar 29 18:30:03 1995 Stan Shebs <shebs@andros.cygnus.com>
* remote-e7000.c (why_stop): Add new kinds of strings to expect
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
- * testsuite/config/rom68k.exp (gdb_target_rom68k): Use
- $targetname, $serialport and $baud instead of hardwired variables.
- * testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
- target doesn't support signals.
Wed Mar 29 09:11:51 1995 Michael Meissner <meissner@tiktok.cygnus.com>