+2016-09-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * elfread.c (auxv.h): New include.
+ (elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
+
+2016-09-08 Tom Tromey <tom@tromey.com>
+
+ * remote.c (remote_notif_stop_ack, remote_wait_as)
+ (show_remote_cmd): Remove unneeded casts.
+
+2016-09-06 Pedro Alves <palves@redhat.com>
+
+ * top.c (wait_sync_command_done): Don't assume current_ui doesn't
+ change across events. Restore the current UI before returning.
+ (gdb_readline_wrapper): Restore the current UI before returning.
+
+2016-09-06 Pedro Alves <palves@redhat.com>
+
+ * event-top.c (restore_ui_cleanup): Now static.
+ (make_cleanup_restore_current_ui): New function.
+ (switch_thru_all_uis_init): Use it.
+ * infcall.c (call_thread_fsm_should_stop): Use it.
+ * infrun.c (fetch_inferior_event): Use it.
+ * top.c (new_ui_command): Use it.
+ * top.h (restore_ui_cleanup): Delete declaration.
+ (make_cleanup_restore_current_ui): New declaration.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * i386-tdep.c (i386_floatformat_for_type): New function.
+ (i386_gdbarch_init): Install it.
+ * ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
+ (ppc_linux_init_abi): Install it.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbarch.sh (floatformat_for_type): New gdbarch callback.
+ * gdbarch.h, gdbarch.c: Re-generate.
+ * arch-utils.h (default_floatformat_for_type): New prototype.
+ * arch-utils.c (default_floatformat_for_type): New function.
+
+ * doublest.c (floatformat_from_length): Remove.
+ (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
+ * gdbtypes.c (verify_floatformat): Require non-NULL format.
+
+ * dwarf2read.c (dwarf2_init_float_type): New function.
+ (read_base_type): Use it.
+ * stabsread.c (dbx_init_float_type): New function.
+ (read_sun_floating_type): Use it.
+ (read_range_type): Likewise.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * ada-lang.c (ada_language_arch_info): Use gdbarch-provided
+ platform ABI floating-point formats for built-in types.
+ * d-lang.c (build_d_types): Likewise.
+ * f-lang.c (build_fortran_types): Likewise.
+ * m2-lang.c (build_m2_types): Likewise.
+ * mdebugread.c (basic_type): Likewise.
+
+ * go-lang.c (build_go_types): Use IEEE floating-point formats
+ for language built-in types as mandanted by the language.
+ * jv-lang.c (build_java_types): Likewise.
+ * rust-lang.c (rust_language_arch_info): Likewise.
+ * stabsread.c (rs6000_builtin_type): Likewise.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbtypes.c (init_type): Remove "char" special case.
+ (arch_integer_type): Likewise.
+ (gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
+ (objfile_type): Likewise.
+ * mdebugread.c (basic_type): Likewise.
+ * stabsread.c (rs6000_builtin_type): Likewise.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbtypes.h (enum type_flag_value): Remove.
+ Remove references to TYPE_FLAG_... in comments throughout.
+ * gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_...
+ flags, print the corresponding TYPE_... access macro names.
+ Remove references to TYPE_FLAG_... in comments throughout.
+ * infcall.c: Remove references to TYPE_FLAG_... in comments.
+ * valprint.c: Likewise.
+ * gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
+ values, only TYPE_INSTANCE_FLAG_... values.
+ (class TypeFlagsPrinter): Likewise.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbtypes.h (init_type): Remove FLAGS argument. Move OBJFILE
+ argument to first position.
+ (init_integer_type): New prototype.
+ (init_character_type): Likewise.
+ (init_boolean_type): Likewise.
+ (init_float_type): Likewise.
+ (init_decfloat_type): Likewise.
+ (init_complex_type): Likewise.
+ (init_pointer_type): Likewise.
+ * gdbtypes.c (verify_floatflormat): New function.
+ (init_type): Remove FLAGS argument and processing. Move OBJFILE
+ argument to first position.
+ (init_integer_type): New function.
+ (init_character_type): Likewise.
+ (init_boolean_type): Likewise.
+ (init_float_type): Likewise.
+ (init_decfloat_type): Likewise.
+ (init_complex_type): Likewise.
+ (init_pointer_type): Likewise.
+ (arch_float_type): Use verify_floatflormat.
+ (objfile_type): Use init_..._type helpers instead of calling
+ init_type directly.
+ * dwarf2read.c (fixup_go_packaging): Update to changed init_type
+ prototype.
+ (read_namespace_type): Likewise.
+ (read_module_type): Likewise.
+ (read_typedef): Likewise.
+ (read_unspecified_type): Likewise.
+ (build_error_marker_type): Likewise.
+ (read_base_type): Use init_..._type helpers.
+ * mdebugread.c (basic_type): Use init_..._type helpers.
+ (parse_type): Update to changed init_type prototype.
+ (cross_ref): Likewise.
+ * stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
+ (read_sun_builtin_type): Likewise.
+ (read_sun_floating_type): Likewise.
+ (read_range_type): Likewise. Also update to changed init_type
+ prototype.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbtypes.h (arch_decfloat_type): New prototype.
+ (arch_pointer_type): Likewise.
+ * gdbtypes.c (arch_decfloat_type): New function.
+ (arch_pointer_type): Likewise.
+ (gdbtypes_post_init): Use arch_decfloat_type.
+ * avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
+ * ft32-tdep.c (ft32_gdbarch_init): Likewise.
+ * m32c-tdep.c (make_types): Likewise.
+ * rl78-tdep.c (rl78_gdbarch_init): Likewise.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbtypes.c (set_type_code): New function.
+ (init_type, arch_type): Use it.
+
+2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * ada-lang.c (ada_language_arch_info): Use gdbarch_long_double_bit
+ instead of gdbarch_double_bit for "long_long_float".
+
+2016-09-05 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention that a C++ compiler is now required.
+ * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
+ (COMPILE.pre, CC_LD): Use CXX directly.
+ (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
+ * acinclude.m4: Don't include build-with-cxx.m4.
+ * build-with-cxx.m4: Delete file.
+ * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
+ * warning.m4: Assume $enable_build_with_cxx is yes.
+ * configure: Regenerate.
+
+2016-09-05 Pedro Alves <palves@redhat.com>
+
+ PR backtrace/19927
+ * frame.c (get_frame_id): Compute the frame id if not computed
+ yet.
+ (unwind_to_current_frame): Delete.
+ (get_current_frame): Use get_prev_frame_always_1 to get the
+ current frame and assert that that always succeeds.
+ (get_prev_frame_if_no_cycle): Skip cycle detection if returning
+ the current frame.
+
+2016-09-02 Tom Tromey <tom@tromey.com>
+
+ PR gdb/11616:
+ * dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address.
+ * dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle
+ DW_OP_form_tls_address.
+ (locexpr_describe_location_piece): Likewise.
+ * dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment.
+ * dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address.
+ (ctx_no_get_tls_address): Mention DW_OP_form_tls_address.
+ * compile/compile-loc2c.c (struct insn_info): Update comment.
+ (compute_stack_depth_worker): Handle DW_OP_form_tls_address.
+
+2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * target.c (target_wait): Mention that the function's prototype
+ can be found at target/target.h.
+ * target.h (target_wait): Move prototype from here...
+ * target/target.h (target_wait): ... to here.
+
+2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * fork-child.c (startup_inferior): Replace calls to target_resume
+ by target_continue{,_no_signal}, depending on the case.
+ * linux-nat.c (cleanup_target_stop): Call
+ target_continue_no_signal instead of target_resume.
+ * procfs.c (procfs_wait): Likewise.
+ * target.c (target_continue): New function.
+ * target/target.h (target_continue): New prototype.
+
+2016-08-31 Yao Qi <yao.qi@linaro.org>
+
+ * record-full.c (record_full_insert_breakpoint): Fix typo.
+
+2016-08-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * thread.c (tp_array_compar): Insert missing parentheses.
+
+2016-08-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
+ designated initializer list by plain initializer list, for C++
+ compliance.
+
+2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
+
+ * aarch64-linux-nat.c (ps_get_thread_area): Remove const from
+ struct ps_prochandle.
+ * amd64-linux-nat.c (ps_get_thread_area): Likewise.
+ * arm-linux-nat.c (ps_get_thread_area): Likewise.
+ * gdb_proc_service.h (ps_get_thread_area): Likewise.
+ * i386-linux-nat.c (ps_get_thread_area): Likewise.
+ * m68klinux-nat.c (ps_get_thread_area): Likewise.
+ * mips-linux-nat.c (ps_get_thread_area): Likewise.
+ * nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
+ * nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
+ * xtensa-linux-nat.c (ps_get_thread_area): Likewise.
+
+2016-08-24 Simon Marchi <simon.marchi@ericsson.com>
+
+ * infcmd.c (set_inferior_io_terminal): Set inferior terminal to
+ NULL if terminal_name is an empty string.
+ (_initialize_infcmd): Make the argument of "set inferior-tty"
+ optional, mention it in the help doc.
+
+2016-08-24 Carl Love <cel@us.ibm.com>
+
+ * rs6000-tdep.c (rs6000_gdbarch_init): Remove call
+ set_gdbarch_deprecated_fp_regnum() architecture
+ initialization function.
+
+2016-08-23 Simon Marchi <simon.marchi@ericsson.com>
+
+ * stack.c (parse_frame_specification): Fix typo in comment.
+
+2016-08-23 Pedro Alves <palves@redhat.com>
+
+ PR gdb/20494
+ * inflow.c (our_terminal_info, initial_gdb_ttystate): Update
+ comments.
+ (enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
+ Delete.
+ (set_initial_gdb_ttystate): Record our_terminal_info here too,
+ instead of ...
+ (gdb_has_a_terminal): ... here. Reimplement in terms of
+ initial_gdb_ttystate. Make static.
+ * terminal.h (gdb_has_a_terminal): Delete declaration.
+ (set_initial_gdb_ttystate): Add comment.
+ * top.c (show_interactive_mode): Use input_interactive_p instead
+ of gdb_has_a_terminal.
+
+2016-08-22 Pedro Alves <palves@redhat.com>
+
+ PR gdb/20505
+ * linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
+ find the vDSO's start address with AT_SYSINFO_EHDR too, and
+ determine the vDSO's size by finding the PT_LOAD segment that
+ matches AT_SYSINFO_EHDR.
+
+2016-08-19 Yao Qi <yao.qi@linaro.org>
+
+ * aarch64-tdep.c (aarch64_analyze_prologue): Handle register
+ based STP instruction.
+
+2016-08-19 Yao Qi <yao.qi@linaro.org>
+
+ * completer.c (linespec_location_completer): Make file_to_match
+ null-terminated.
+
+2016-08-19 Pedro Alves <palves@redhat.com>
+
+ * amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
+ addresses over 0x7fffffff.
+
2016-08-18 Carl Love <cel@us.ibm.com>
* MAINTANERS Write After Approval): Add "Carl Love".