+start-sanitize-gdbtk
+Mon Aug 11 10:43:04 1997 Tom Tromey <tromey@cygnus.com>
+
+ * gdbtk.c (gdbtk_init): Use ide_event_init_from_environment.
+
+end-sanitize-gdbtk
+Sun Aug 10 19:08:26 1997 Jeffrey A Law (law@cygnus.com)
+
+ * utils.c (error): Fix return type for !ANSI_PROTOTYPES.
+
+Sun Aug 10 16:49:09 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * ocd.c: move ocd_write_bytes proto to ocd.h since it is used
+ by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
+ BDM_BREAKPOINT if not defined in tm.h
+ (ocd_error): add new error cases
+ (ocd_start_remote): send the OCD_INIT command before
+ OCD_AYT and OCD_GET_VERSION calls, 80 was correct speed after all
+ (ocd_write_bytes): no longer static
+ (ocd_insert_breakpoint): no longer static
+ (ocd_remove_breakpoint): new
+ * ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
+ and ocd_remove_breakpoint
+ * ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
+ and ocd_remove_breakpoint instead of memory_insert_breakpoint
+ and memory_remove_breakpoint.
+ (bdm_ppc_open): after calling ocd_open, modify DER
+ register so interrupts will drop us into debugging mode, finally
+ disable the watchdog timer on the board so we don't leave BDM
+ mode unexpectedly.
+
+Sat Aug 9 01:50:14 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * values.c (value_primitive_field): Account for offset when
+ extracting the value of a bitfield.
+ From Paul Hilfinger <hilfingr@CS.Berkeley.EDU>.
+
+Fri Aug 8 21:35:44 1997 Mark Alexander <marka@cygnus.com>
+
+start-sanitize-tic80
+ * config/tic80/tic80.mt:
+ (GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
+ (SIM): Remove -lm to prevent make errors.
+ * configure.tgt: add gdbserver to configdirs for tic80.
+end-sanitize-tic80
+ * gdbserver/utils.c (error): Change prototype to match defs.h.
+ * gdbserver/low-sim.c: Change simulator calls to use new interface.
+ * remote.c (remote_write_bytes): Include '$' at start of packet
+ and checksum at end of packet in overhead calculation.
+
+Fri Aug 8 15:59:24 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * ser-ocd.c: If _WIN32, include <windows.h>.
+ (dll_do_command): New static variable if _WIN32.
+ (ocd_open): Set dll_do_command if _WIN32.
+ (ocd_write): Use dll_do_command rather than do_command.
+ * config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
+ (BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
+ ($(BDM_LIBNAME)): Remove target.
+ * wigglers.def: Remove.
+
+start-sanitize-gdbtk
+ * gdbtk.c (gdbtk_init): Change gdbtk_lib_tmp and gdbtk_file to be
+ dynamically allocated, rather than fixed size. Pass "gdbtcl" to
+ ide_initialize_paths to match installed directory name. If IDE,
+ use auto_path to search for main.tcl.
+ * Makefile.in (install-only): If ENABLE_IDE, install from gdbtcl2
+ rather than gdbtcl.
+
+end-sanitize-gdbtk
+ * config/i386/cygwin32.mh ($(BDM_LIBNAME)): Rename target from
+ libwigglers.def.
+ (libwigglers.a): Remove target.
+
+start-sanitize-gdbtk
+ * gdbtk.c (gdbtk_cleanup): New static function.
+ (gdbtk_init): Add gdbtk_cleanup as a final cleanup. Uncomment
+ call to ide_initialize_paths. If we can't initialize the event
+ system, set GDBTK_IDE to 0 in the Tcl interpreter. Create the
+ ide_window_register and the ide_window commands. Initialize tk,
+ itcl, and tix after initializing the IDE.
+
+ * configure.in (tixdir): Update for cygwin32 case for Tcl 8.0.
+ * configure: Rebuild.
+
+end-sanitize-gdbtk
+Fri Aug 8 13:11:01 1997 Mike Meissner <meissner@cygnus.com>
+
+ * config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Make sure
+ ppc-bdm.o and ocd.o are used for all powerpc-eabi targets.
+
+start-sanitize-gdbtk
+Fri Aug 8 00:13:32 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * gdbtk.c (breakpoint_notify): Change buffer size from 100
+ to 256 to avoid memory corruption with very long pathnames.
+
+end-sanitize-gdbtk
+Thu Aug 7 19:40:52 1997 Geoffrey Noer <noer@cygnus.com>
+
+ Changes to OCD support to support wiggler box as well as
+ target boxes:
+ * ocd.c: change speed in init command to 0 from 80,
+ add (temporary) logging commands to help debugging,
+ (ocd_open): if "target ocd wiggler lpt" then use special
+ ser-ocd.c serial interface which communicates with Wigglers.dll,
+ otherwise ("target ocd <foo>") do as we did before
+ (ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to
+ switch of known commands of len 0
+ * ocd.h: add OCD_LOG_FILE
+ * serial.c (serial_open): do serial_interface_lookup on ocd
+ in the case of ocd
+ * ser-ocd.c: add buffer to contain responses from sending a
+ command to the Wigglers.dll.
+ (ocd_readchar): return curr char from buffer and increment ptr
+ (ocd_write): send buffer to Wigglers.dll, storing response in
+ return buffer and initializing curr location ptr to start of
+ buffer.
+
+start-sanitize-gdbtk
+Thu Aug 7 14:08:23 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * configure.in: Change required Tix version to 4.1.8.0 .
+ * configure: Rebuilt.
+
+end-sanitize-gdbtk
+Thu Aug 7 13:39:31 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * ocd.h: add OCD_SET_CONNECTION
+ * ocd.c: rename "do_command" to "ocd_do_command"
+
+Thu Aug 7 13:09:17 1997 Geoffrey Noer <noer@cygnus.com>
+
+ Nomenclature change. BDM is a specific type of OCD
+ (On Chip Debugging). Wiggler is the parallel port box controlled
+ by Wigglers.dll. The faster target box from Macraigor Systems
+ is not a wiggler.
+ * ocd.c:
+ * ocd.h:
+ * ppc-bdm.c:
+ * ser-ocd.c:
+ Replace all instances of "wiggler_" with "ocd_" and change most other
+ instances of "wiggler" to "ocd" or "ocd device" depending on context.
+ * config/m68k/monitor.mt: remove remote-wiggler.o from TDEPFILES
+ until OCD with that target is supported again.
+
+Wed Aug 6 16:15:31 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
+ sub makes, change clean rule to also remove *.a to remove
+ libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
+ remove remote-wiggler.o
+ * configure.in: add DLLTOOL support
+ * configure: regenerate
+ * wigglers.def: new file for imports for wigglers.dll
+ * ser-ocd.c: new file which is layer between ocd.c and either the
+ wigglers.dll or the target box, only stub so far
+ * config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
+ * config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
+ * config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
+ to XDEPFILES, add rules to build libwigglers.a
+
+ checking in changes of Stu Grossman <grossman@cygnus.com>:
+ * remote-wiggler.c: delete
+ * ocd.c: new, was remote-wiggler.c
+ always include sys/types.h, include ocd.h, move WIGGLER
+ commands and many wiggler prototypes to ocd.h, make wiggler_desc
+ static, stop making local wiggler functions static,
+ define write_mem_command for wiggler_write_bytes
+ (wiggler_start_remote): stop hardcoding the target type,
+ instead set and use a target_type variable.
+ (wiggler_open): add new target_type and ops args
+ (wiggler_wait): now no longer takes pid and target_status as args,
+ stop trying to set target_status struct, remove BGND insn
+ checks
+ (read_bdm_registers): renamed to wiggler_read_bdm_registers
+ (wiggler_read_bdm_registers): numregs arg changed to reglen arg,
+ remove pktlen check, set reglen instead of numregs
+ (dump_all_bdm_regs): delete
+ (wiggler_fetch_registers): delete
+ (wiggler_prepare_to_store): now just an empty function
+ (wiggler_store_registers): delete
+ (wiggler_read_bdm_register): new
+ (wiggler_write_bdm_registers): new
+ (wiggler_write_bdm_register): new
+ (wiggler_write_bytes): use write_mem_command variable instead of
+ WIGGLER_WRITE_MEM
+ (get_packet): renamed to wiggler_get_packet, change refs throughout
+ (put_packet): renamed to wiggler_put_packet, change refs throughout
+ (wiggler_get_packet): add break to default case of switch,
+ change length of WIGGLER_GET_VERSION len to 10 from 4 to match
+ specs
+ (wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
+ (flash_xfer_memory): delete
+ (noop_store_registers): new placeholder replacement for
+ target_store_registers() which prevents generic_load from trying to
+ set up the PC.
+ (bdm_update_flash_command): add store_registers_tmp variable,
+ make handling of wiggler_ops more generic -- define wiggler_ops
+ in a target-specific file instead (such as ppc-bdm.c in the case
+ of the ppc), use current_target to deal with registers again
+ making this file less target-specific.
+ (bdm_read_register_command): new
+ (_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
+ comment out add_cmd ("read-register", ...)
+ * ocd.h: new, contains common wiggler prototypes, command definitions
+ * ppc-bdm.c: file for ppc-specific OCD code, including target_ops
+ structure for ppc bdm
+ (bdm_ppc_open): new
+ (bdm_ppc_wait): new
+ (bdm_ppc_fetch_registers): new
+ (bdm_ppc_store_registers_: new
+ (_initialize_bdm_ppc): new
+ * config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
+
+start-sanitize-tic80
+Tue Aug 5 23:56:14 1997 Mark Alexander <marka@cygnus.com>
+
+ * tic80-tdep.c (tic80_init_extra_frame_info): Allow zero
+ as a valid SP-relative offset of a saved register.
+
+end-sanitize-tic80
+Wed Aug 6 00:24:08 1997 Jeffrey A Law (law@cygnus.com)
+
+ * hpread.c (hpread_read_struct_type): Use accessor macros rather
+ than directly mucking around with data structures.
+
+Tue Aug 5 13:37:14 1997 Per Bothner <bothner@cygnus.com>
+
+ * gdbtypes.h: Re-interpret struct field. Suppport address of static.
+ Add a bunch of macros.
+ * coffread.c, dwarf2read.c, dwarfread.c, mdebugread.c, stabsread.c:
+ Update to use new macros.
+ * coffread.c, hpread.c, stabsread.c: Remove bugus TYPE_FIELD_VALUE.
+ * value.h, values.c (value_static_field): New function.
+ * cp-valprint.c, valops.c: Modify to use value_static_field.
+
+ * jv-lang.c (get_java_utf8_name): Re-write so it works with
+ implied (missing) data field, as defined by cc1java.
+ (java_link_class_type): Type length and field offset (in interior)
+ now includes object header. Get static fields working.
+ * jv-lang.h (JAVA_OBJECT_SIZE): Update for change in Kaffe.
+ * jv-typeprint.c (java_type_print_derivation_info,
+ java_type_print_base): New functions, for better Java output.
+ * jv-valprint.c: Start to support Java-specific output.
+
+Sun Aug 3 08:18:09 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * c-valprint.c (c_val_print): Use extract_address to retrieve
+ the address of the virtual function.
+ From Peter Bloecher (Peter.Bloecher@eedn.ericsson.se).
+
+ * eval.c (evaluate_subexp_standard), valarith.c (value_x_unop):
+ Handle C++ operator *.
+
+Fri Aug 1 15:21:44 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * gdbtk.c (Tcl_Alloc): Don't provide our own version of this if
+ _WIN32.
+ (Tcl_Realloc, Tcl_Free): Likewise.
+ * configure.in: Check for cygwin32 environment. Define and
+ substitute WIN32LIBS and WIN32LDAPP. Always set configdir to
+ unix; setting it to win was for an old Tcl/Tk configuration
+ scheme.
+ * aclocal.m4 (CY_AC_LOAD_TKCONFIG): Substitute TK_BUILD_INCLUDES.
+ * Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
+ (WIN32LDAPP, WIN32LIBS): Define.
+ (CLIBS): Add $(WIN32LIBS).
+ (gdb): Use $(WIN32LDAPP).
+ * configure: Rebuild.
+
+Thu Jul 31 15:40:19 1997 Per Bothner <bothner@cygnus.com>
+
+ * symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC, SYMBOL_INIT_DEMANGLED_NAME,
+ SYMBOL_DEMANGLED_NAME): Add demangling support for Java.
+ * utils.c (fprintf_symbol_filtered): Handle language_java.
+
+ * symtab.c (decode_line_1): Handle Java-style package.class.method.
+
+Wed Jul 30 14:04:18 1997 Per Bothner <bothner@cygnus.com>
+
+ * java-*: Renamed to jv-*, to make fit within 14 characters.
+ * jv-lang.h (java_type_print): Added declaration.
+ * jv-typeprint.c: New file. Provides java_print_type.
+ * jv-lang.c (java_link_class_type): New function.
+ (java_language_defn): Replace c_print_type by java_print_type.
+ * Makefile.in: Update accordingly.
+
+Tue Jul 29 10:12:44 1997 Felix Lee <flee@cygnus.com>
+
+ * Makefile.in (init.c): except some mswin files do need to be
+ scanned. oh well.
+
+Mon Jul 28 14:04:39 1997 Felix Lee <flee@cygnus.com>
+
+ * Makefile.in (init.c): don't try to scan mswin for _initialize
+ funcs. (generates misleading error message because files have
+ .cpp suffix, not .c suffix)
+
+Mon Jul 28 13:27:21 1997 Felix Lee <flee@cygnus.com>
+
+ * ser-e7kpc.c: <w32sut.h> -> "mswin/w32sut.h"
+
+Mon Jul 28 02:54:31 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * xcoffread.c (coff_getfilename): Do not strip directory component
+ of filename.
+
+Fri Jul 25 15:16:15 1997 Felix Lee <flee@cygnus.com>
+
+ * mon960-rom.c: removed unused #includes; no ioctl.h in Windows.
+ * nindy-share/ttyflush.c: find sleep() for _MSC_VER.
+ * remote-array.c: #include <ctype.h> for isascii().
+ * utils.c (notice_quit,pollquit): cleanup. _WIN32 -> _MSC_VER.
+
+Fri Jul 25 16:48:18 1997 Jeffrey A Law (law@cygnus.com)
+
+ * top.c (execute_command): Force cleanup of alloca areas.
+ * findvar.c (registers_changed): Likewise.
+
+start-sanitize-v850
+Fri Jul 25 15:37:15 1997 Stu Grossman <grossman@cygnus.com>
+
+ * v850ice.c: Include <windows.h>. Support new v850 DLL interface.
+ * Add defs for target status.
+
+end-sanitize-v850
+start-sanitize-gdbtk
+Tue Jul 22 19:45:37 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * configure.in, aclocal.m4: Another fix to find the
+ correct Tix library name.
+
+ * configure: Rebuilt.
+
+end-sanitize-gdbtk
+
+Tue Jul 22 12:11:48 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * config/mips/tm-mips64.h: longs, long longs, and pointers
+ are all 64 bits on EABI mips targets.
+
+start-sanitize-gdbtk
+Mon Jul 21 22:24:07 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * aclocal.m4: Search for the correct tix library.
+end-sanitize-gdbtk
+
+Thu Jul 17 11:38:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * partial-stab.h (case N_BINCL): detect missing partial symtab.
+ * dbxread.c: Add a complaint for N_BINCL without a corresponding
+ partial symtab. Remove earlier change of 5/27/97.
+
+Wed Jul 16 10:38:03 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * sol-thread.c (sol_thread_[store, fetch]_registers): if
+ inferior_pid is an LWP rather than a Solaris thread, let
+ procfs handle the request.
+ (rw_common, sol_thread_xfer_memory): procfs_xfer_memory will
+ only work if inferior_pid points to an LWP (rather than a
+ Solaris thread). Use procfs_first_available to find a good LWP.
+ (info_solthreads): added a maintenance command to list all
+ known Solaris threads and their attributes.
+ * mips-tdep.c (mips_do_registers_info): Completely changed the
+ output format to be neat and columnar. Added the helper funcs
+ do_fp_register_row and do_gp_register_row. Also small mods to
+ mips_print_register, which is still used to print a single reg.
+
+Mon Jul 14 18:02:53 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * procfs.c (wait_fd): Handle an fd that has "hung up" or
+ otherwise terminated (Solaris threads).
+
+start-sanitize-gdbtk
+Thu Jul 10 00:02:41 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * Makefile.in, configure.in, aclocal.m4: Add Itcl, Tix, and
+ IDE configuration information.
+
+ * gdbtk.c (breakpoint_notify): Send address, linenumber and
+ filename when a breakpoint is set. Avoids call to bp_info.
+ (gdbtk_init): Call Tcl_FindExecutable(). Add code to handle
+ Itcl, Tix and IDE initialization.
+
+ * defs.h (init_ui_hook): Change prototype to accept one arg.
+
+ * main.c (gdb_init): Change prototype to accept one arg.
+
+ * top.c (gdb_init): Accepts one argument which it uses to
+ call (*init_ui_hook), which will be gdbtk_init(). This is
+ used for calling Tcl_FindExecutable().
+
+ * gdbtcl/breakpoint.tcl (gdbtk_tcl_breakpoint): Change to
+ accept variable number of args for compatibility with
+ cchanges in gdbtk.c.
+
+ * configure: Regenerated.
+
+ * gdbtcl/tclIndex: Regenerated.
+
+end-sanitize-gdbtk
+
+Fri Jul 4 14:49:33 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * source.c (OPEN_MODE, FDOPEN_MODE): Define; value depends upon
+ whether CRLF_SOURCE_FILES is defined.
+ (open_source_file): Use OPEN_MODE with open and openp.
+ (print_source_lines): Use FDOPEN_MODE with fdopen. If
+ CRLF_SOURCE_FILES is defined, ignore \r characters.
+ (forward_search_command): Use FDOPEN_MODE with fdopen.
+ (reverse_search_command): Likewise.
+ * config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define.
+ (LSEEK_NOT_LINEAR): Don't define.
+
+Thu Jul 3 17:41:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * mips-tdep.c (mips_extract_return_value): align 4-byte float
+ return values within the 8-byte FP register.
+
+Thu Jul 3 13:48:11 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * mips-tdep.c (mips_push_arguments): don't left-adjust 32-bit
+ integers in 64-bit register parameters before function calls.
+
+Mon Jun 30 17:54:51 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * mips-tdep.c (mips_push_arguments): special-case handling for
+ odd-sized struct parameters passed in registers / on stack.
+
+Mon Jun 30 15:30:38 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * mips-tdep.c (mips_push_arguments): tweak alignment of small
+ structs passed in registers for little-endian non-EABI mode.
+
+Mon Jun 30 13:05:39 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * breakpoint.c (frame_in_dummy): use generic dummy if available.
+ (check_duplicates, clear_command): compare sections only if
+ doing overlay debugging.
+
+Fri Jun 27 23:03:53 1997 Fred Fish <fnf@ninemoons.com>
+
+ * buildsym.h (struct subfile): Add debugformat member.
+ (record_debugformat): Declare global function.
+ * buildsym.c (start_subfile): Initialize debugformat member
+ to NULL.
+ (record_debugformat): New function to record the format.
+ (end_symtab): Copy format into symtab debugformat member.
+ (end_symtab): Free subfile debugformat member.
+ * symmisc.c (free_symtab): Free debugformat when freeing
+ symtab.
+ * symfile.c (allocate_symtab): Initialize the new debugformat
+ member for new symtabs.
+ * symtab.h (struct symtab): Add debugformat member.
+ * source.c (source_info): Print the debug format.
+
+ * os9kread.c (os9k_process_one_symbol): Call record_debugformat
+ with "OS9".
+ * hpread.c (hpread_expand_symtab): Call record_debugformat
+ with "HP".
+ (hpread_process_one_debug_symbol): Ditto.
+ * dbxread.c (process_one_symbol): Call record_debugformat
+ with "stabs".
+ * coffread.c (coff_start_symtab): Call record_debugformat
+ with "COFF".
+ * xcoffread.c (read_xcoff_symtab): Call record_debugformat
+ with "XCOFF".
+ * dwarfread.c (read_file_scope): Call record_debugformat
+ with "DWARF 1".
+ * dwarf2read.c (read_file_scope): Call record_debugformat
+ with "DWARF 2".
+ * dstread.c (dst_end_symtab): Set debugformat to be
+ "Apollo DST".
+ * mdebugread.c (new_symtab): Set debugformat to be "ECOFF".
+
+Fri Jun 27 21:05:45 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * mips-tdep.c (mips_push_arguments): handle alignment of
+ integer and struct args on stack for mips64 big-endian.
+
+Fri Jun 27 19:19:12 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * config/mips/tm-mips.h (USE_STRUCT_CONVENTION): MIPS_EABI returns
+ structs in a register wherever possible.
+ * mips-tdep.c (mips_extract_return_value): handle structs.
+ (mips_store_return_value): handle values smaller than MIPS_REGSIZE
+ (including structs, if gdb ever allows it).
+
+start-sanitize-sh4
+Fri Jun 20 17:58:34 1997 Fred Fish <fnf@cygnus.com>
+
+ * sh-tdep.c (sh_skip_prologue): Also recognize fmov insns.
+ (sh_frame_find_saved_regs): Recognize fmov insns and adjust
+ stack push count accordingly.
+ * sh-tdep.c (IS_FMOV, FPSCR_SZ): New defines
+
+end-sanitize-sh4
+Thu Jun 19 08:18:48 1997 Mark Alexander <marka@cygnus.com>
+
+ * utils.c (floatformat_from_doublest): Improve test for infinity.
+
+Wed Jun 18 13:47:52 1997 Fred Fish <fnf@cygnus.com>
+
+ * dwarfread.c (isreg, optimized_out, offreg, basereg): Move
+ global variables into the struct dieinfo structure.
+ (locval): Pass pointer to a dieinfo struct rather than a
+ pointer to the raw location information. Change prototype.
+ Set isreg, optimized_out, offreg and basereg as appropriate.
+ (struct_type): Call locval with dieinfo struct pointer.
+ (new_symbol): Ditto.
+ (new_symbol): Call locval and save location before testing
+ the values of the new dieinfo struct flags, set by locval.
+
+Tue Jun 17 13:30:12 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * procfs.c (proc_set_exec_trap, procfs_init_inferior, procfs_wait,
+ unconditionally_kill_inferior): Undo Oct 26 1996 and Apr 26 1997
+ changes to trace PRFS_STOPTERM and handle PR_DEAD.
+ These changes tried to work around a problem with an early DU 4.0
+ release, but they trigger subtle timing dependent kernel bugs
+ in older OSF/1 releases.
+
+Tue Jun 17 06:52:47 1997 Fred Fish <fnf@cygnus.com>
+
+ * dwarfread.c (new_symbol): Use SYMBOL_VALUE_ADDRESS, instead of
+ SYMBOL_VALUE, to set the value of LOC_STATIC symbols.
+
+Mon Jun 16 18:38:28 1997 Mark Alexander <marka@cygnus.com>
+
+ * infrun.c (wait_for_inferior): Mark registers as invalid when
+ stepping over an instruction that triggered a watchpoint.
+ * remote-mips.c: Numerous changes to support hardware breakpoints
+ and watchpoints on LSI MiniRISC and TinyRISC boards.
+ * mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h.
+ (mips_breakpoint_from_pc): Account for different breakpoint
+ instructions used by PMON and IDT monitor.
+ * config/mips/tm-embed.h: Enable hardware breakpoints on embedded
+ MIPS targets.
+ * config/mips/tm-mips.h: Define breakpoint instructions for
+ PMON and IDT monitor. Move MIPS16-related macros here from
+ mips-tdep.c.
+
+Fri Jun 13 13:44:47 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * config/mips/tm-tx39[l].h, tx39[l].mt: change r3900 target to tx39.
+
+Fri Jun 13 14:14:10 1997 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (mn10300_analyze_prologue): Fix some comments.
+ Add missing return statements after finding an "add imm{16,32},sp"
+ instruction.
+ (mn10300_frame_chain): Add in size of our register save area to find
+ our caller's frame if our caller does not have a frame pointer.
+
+Fri Jun 13 12:55:49 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * symfile.c (generic_load): Check return code of target_write_memory.
+
+Fri Jun 13 10:28:09 1997 Fred Fish <fnf@cygnus.com>
+
+ * config/i386/nm-linux.h: Enable prototypes that were #ifdef out.
+ * config/tm-sysv4.h (in_plt_section): Add prototype.
+
+ * maint.c (maintenance_translate_address): Avoid assignment
+ inside if, per GNU coding standards.
+ * symfile.c (simple_read_overlay_table): Avoid assignments inside if,
+ per GNU coding standards.
+
+ * monitor.c (parse_register_dump): Is really a void function.
+ Add prototype.
+ (monitor_read_memory): Remove unused variable "name".
+ (monitor_read_memory): Remove unused variable "regbuf".
+ (monitor_open): Remove unused variable "i".
+ (get_hex_word): Apparently unused, #if away for now.
+ (from_hex): Ditto.
+
+ * i386v4-nat.c (supply_fpregset): Remove unused variable "regi".
+ (fill_fpregset): Remove unused variables "regi", "to", "from" and
+ "registers".
+
+ * remote-e7000.c (ctype.h): Include.
+ (e7000_insert_breakpoint): #if away unused arg used by unused expr.
+ * frame.h (generic_get_saved_register): Add prototype.
+ (enum lval_type): Add partial forward decl.
+ * dsrec.c (make_srec): Remove unused variable "type_code".
+ * remote-sim.c (gdbsim_wait): Handle sim_running and sim_polling
+ cases by just ignoring them.
+ (command.h): Include.
+
+ * java-exp.y (parse_number): Remove unused variable "unsigned_p".
+ * java-lang.c (gdbcore.h): Include for prototypes.
+ (type_from_class): Remove unused variable "ftype".
+ (type_from_class): Remove unused variable "name_length".
+ (evaluate_subexp_java): Add default case to handle remaining
+ enumerations.
+ * java-valprint.c (c-lang.h): Include for prototypes.
+
+ * symfile.c (simple_read_overlay_region_table): #if away
+ unused function.
+ (simple_free_overlay_region_table): Ditto.
+ (overlay_is_mapped): Add default case to switch.
+ (simple_read_overlay_region_table): Ditto.
+ (simple_read_overlay_region_table): Add prototype.
+
+ * symtab.c (fixup_symbol_section): Remove unused msym variable.
+ (fixup_psymbol_section): Ditto.
+ (find_pc_sect_symtab): Make distance a CORE_ADDR.
+
+ * utils.c: Add comment about t_addr being either unsigned long or
+ unsigned long long.
+ (paddr): Change formats to match actual types args are cast to.
+ (preg): Ditto.
+ (paddr_nz): Ditto.
+ (preg_nz): Ditto.
+
+ * defs.h (perror_with_name): Is a NORETURN function.
+ * utils.c (perror_with_name): Is a NORETURN function.
+ (error): Is NORETURN independently of ANSI_PROTOTYPES.
+
+ * symtab.c (fixup_symbol_section): Remove prototype.
+ * symtab.h: (fixup_symbol_section): Add prototype.
+ * m32r-rom.c (report_transfer_performance): Add prototype.
+ * sparclet-rom.c: Ditto.
+ * dsrec.c: Ditto.
+
+ * c-exp.y (parse_number): Cast args to float* or double* as
+ appropriate for conversion format.
+ * java-exp.y (parse_number): Ditto.
+
+ * Makefile.in (c-exp.tab.c): Remove #line lines that refer
+ to nonexistant y.tab.c file.
+ (java-exp.tab.c): Ditto.
+ (f-exp.tab.c): Ditto.
+ (m2-exp.tab.c): Ditto.
+start-sanitize-gdbtk
+
+ * gdbtk.c (gdbtk_init): Make truth value test explicit.
+ Remove unused static variable "Gdbtk_Library".
+end-sanitize-gdbtk
+
+ * sh-tdep.c (symfile.h): Include.
+ (gdb_string.h): Include.
+ (sh_fix_call_dummy): Ifdef away, currently unused.
+ * config/sh/tm-sh.h (pop_frame): Add prototype.
+ * config/sh/tm-sh.h (sh_set_processor_type): Add prototype.
+
+Sat Jun 7 02:34:19 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+start-sanitize-gdbtk
+ * gdbtk.c (gdb_get_breakpoint_info): Add string for new
+ enumeration del_at_next_stop to bpdisp array.
+
+end-sanitize-gdbtk
+ * eval.c (evaluate_subexp_for_sizeof): Handle dereferencing
+ of non-pointer values.
+
+ * symtab.c (gdb_mangle_name): Improve mangling of nested types,
+ their physical names already include the class name.
+
+ * valops.c (value_cast): Handle upcast of a class pointer.
+
+ From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de):
+ * corelow.c (get_core_registers): Make secname big enough.
+
+Fri Jun 6 14:43:23 1997 Keith Seitz <keiths@pizza.cygnus.com>
+
+ * config/sh/tm-sh.h: add define for FPSCR_REGNUM
+ * sh-tdep.c (sh_show_regs): print out all registers for
+ the current processor
+
+Fri Jun 6 13:01:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * remote-sim.c (gdbsim_kill): Remove call to depreciated function
+ sim_kill.
+
+Thu Jun 5 11:39:03 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ Fixes for recent correction to PE format:
+ * coffread.c (pe_file): New static variable.
+ (struct find_targ_sec_arg): Change resultp from pointer to int to
+ pointer to pointer to asection.
+ (find_targ_sec): Just store the section in args->resultp, not the
+ section offset value.
+ (cs_to_section): Compute the section offset value from the
+ section.
+ (cs_section_address): New static function.
+ (coff_symfile_read): Set pe_file.
+ (read_one_sym): When reading a PE file, adjust the symbol value to
+ include the section address if the symbol has an appropriate
+ storage class.
+
+Tue Jun 3 16:24:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
+
+ * configure.tgt: add mipsr3900-elf target
+ * config/mips/r3900.mt r3900l.mt tm-r3900.h tm-r3900l.h: ditto
+
+start-sanitize-gdbtk
+Tue Jun 3 15:46:51 1997 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (LIB_RUNTIME_DIR): New variable.
+
+end-sanitize-gdbtk
+Tue May 27 10:34:11 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * dbxread.c: Check malloc's return for null, prevent segv.
+
+Fri May 23 14:45:02 1997 Bob Manson <manson@charmed.cygnus.com>
+
+ * infcmd.c (jump_command): Don't try to dereference sfn if it's
+ NULL.
+
+Fri May 23 13:51:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * top.c (init_cmd_lists): Always initialize endianlist.
+ (init_main): Always define endian commands.
+ (set_endian_big): Issue warning if endian not selectable.
+ (set_endian_little): Ditto.
+ (set_endian_auto): Ditto.
+
+Thu May 22 11:53:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * remote-sim.c (simulator_command): Restrict access to the
+ simulator to periods when the simulator is open.
+
+Wed May 21 16:03:25 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * procfs.c (init_procinfo): new function, abstracts some code
+ shared by create_procinfo and do_attach;
+ (procfs_set_inferior_syscall_traps): new function, abstracts
+ some code needed by procfs_init_inferior, do_attach, and
+ procfs_lwp_creation_handler; (procfs_first_available): new
+ function, find any LWP that's runnable; (procfs_thread_alive):
+ replace stub function with real implementation;
+ (procfs_lwp_creation_handler): fix bug starting new child
+ threads; (info_proc): bug fixes and enhancements for the
+ "INFO PROCESSES" command; (close_procinfo_file): call new
+ function "delete_thread" to cleanup GDB's thread database;
+ (proc_init_failed): add new argument "kill", to control whether
+ process is killed (so this function can be shared by
+ create_procinfo and do_attach); (procfs_exit_handler): handle
+ exit from an attached process, and cleanup procinfo handles
+ when the process exits; (procfs_resume, procfs_wait): cleanup
+ after a thread when it exits; (do_attach, do_detach): handle
+ attached processes with multiple threads; plus some general
+ improvements in the diagnostic output.
+ * sol-thread.c (sol_thread_alive): replace stub with real
+ implementation; (thread_to_lwp, lwp_to_thread): enhance to
+ handle threads that may have exited; (sol_thread_attach): add
+ startup setup stuff; (sol_thread_detach): add unpush_target
+ call; (sol_thread_mourn_inferior): add unpush_target call;
+ (sol_thread_wait, sol_thread_resume): enhance to deal with
+ thread exit cleanly; (sol_thread_new_objfile,
+ sol_thread_pid_to_str): detect unsuccessful startup and
+ don't crash; plus some general cleanup.
+ * thread.c (delete_thread): new function, allows targets to
+ notify gdb when a thread is no longer valid.
+ * infrun.c (wait_for_inferior): don't try to detect a new
+ thread on receiving a TARGET_EXITED event.
+
+Tue May 20 09:32:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * remote-sim.c (gdbsim_open): Pass callback struct.
+ (init_callbacks): Remove call to sim_set_callbacks.
+
+Thu May 15 07:56:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * config/rs6000/tm-rs6000.h (SIG_FRAME_LR_OFFSET): Define.
+ * rs6000-tdep.c (frameless_function_invocation): Mark frames
+ with a zero PC as frameless to improve backtraces from core dumps
+ caused by dereferencing a NULL function pointer.
+ (frameless_function_invocation, frame_saved_pc, rs6000_frame_chain):
+ Handle frameless functions interrupted by a signal.
+
+ * sparc-tdep.c (sparc_init_extra_frame_info, sparc_frame_saved_pc):
+ Handle frameless functions interrupted by a signal.
+
+Wed May 14 08:58:55 1997 Jeffrey A Law (law@cygnus.com)
+
+ * mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments
+ to reflect current reality. Gross attempt at handling out of
+ line prologues.
+
+ * mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug
+ symbols to find the end of the prologue.
+ * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
+
+start-sanitize-tic80
+Wed May 14 12:04:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.
+
+end-sanitize-tic80
+start-sanitize-tic80
+Mon May 12 11:35:04 1997 Mark Alexander <marka@cygnus.com>
+
+ * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
+ basic C80 features working.
+
+end-sanitize-tic80
+Thu May 8 08:42:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (AC_TYPE_SIGNAL): Add
+ * configure: Re-generate.
+ * remote-sim.c: Signal returns RETSIGTYPE.
+
+start-sanitize-gdbtk
+Wed May 7 19:10:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdbtk.c (wrapped_call): New function - make actual call to tk
+ worker function.
+ (call_wrapper): Rewrite to use top.c:catch_errors.
+
+ * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
+ best.
+
+end-sanitize-gdbtk
+Wed May 7 20:05:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * target.h (target_stop): Drop argument so it can be tested for
+ NULL.
+
+Sat May 3 20:51:48 1997 Mark Alexander <marka@cygnus.com>
+
+ * utils.c (floatformat_from_doublest): Handle infinity properly.
+
+Thu May 1 11:44:46 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * Finalize merge from Hurd folk.
+ Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
+ * thread.c (thread_apply_command, thread_apply_all_command,
+ thread_command): Make sure TP is alive.
+ (thread_alive): New function.
+ Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
+ * infrun.c (sig_print_info): Deal better with long signal names.
+ Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
+ * thread.c (thread_id_to_pid): New function.
+ Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
+ * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
+ set_thread_default_cmd_list, show_thread_default_cmd_list):
+ New variables. (set_thread_cmd, show_thread_cmd,
+ set_thread_default_cmd, show_thread_default_cmd): New functions.
+ Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
+ * gnu-nat.c (inf_startup): remove TASK parameter.
+ (inf_set_task): replace with new function (inf_set_pid).
+ * gdbthread.h: Add extern decl for thread_cmd_list.
+
+Thu May 1 02:28:21 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * printcmd.c (disassemble_command): Adjust low function bound
+ by FUNCTION_START_OFFSET.
+
+start-sanitize-tic80
+Wed Apr 30 15:23:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
+
+end-sanitize-tic80
+Mon Apr 28 21:25:32 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
+ * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
+ in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
+ satisfy symbol dependancy in solib.c (core_ops).
+ * target.[ch] conditionalize Mach-specific signals so that they
+ won't show up in non-Mach gdb's!
+ * thread.c: change name of static function "thread_switch" to
+ "switch_to_thread", to avoid conflict with Mach global symbol;
+ move thread_cmd_list to global scope so targets can add their
+ own thread commands.
+ * infrun.c: sig_print_info: allow for long signal names.
+ * gnu-nat.[ch]: tidying up comments.
+ * gnu-nat.c: remove calls to prune_threads and renumber_threads;
+ gnu_wait must not return -1 when inferior exits;
+ attach_to_child will modify inferior_pid in a way that allows
+ fork_inferior to remain unchanged; remove extra arg from
+ startup_inferior; move Mach thread commands here from thread.c.
+
+Mon Apr 28 18:21:20 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * symtab.c: decode_line_1, replace the assignment to
+ values.sals[0].pc which I accidentally left out on 4/3/97.
+
+Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
+ (fix by Bob Manson).
+ * top.c: change "to enable to enable" to "to enable" in a couple
+ of help strings.
+
+Mon Apr 28 09:01:59 1997 Mark Alexander <marka@cygnus.com>
+
+ * breakpoint.c (remove_breakpoint): Pass correct type to
+ target_remove_watchpoint.
+ * target.h: Improve comment for target_{remove,insert}_breakpoint.
+
+Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * alpha-tdep.c (heuristic_proc_desc): Increase search limit
+ for return address register, handle `ret' instruction.
+
+ * corelow.c (get_core_registers): Initialize cf.
+
+ * procfs.c: Minor changes to make pre-ANSI compilers happy.
+ (procfs_notice_signals): Copy traced signal set back to
+ pi->prrun.pr_trace.
+ (unconditionally_kill_inferior): If PR_DEAD is defined,
+ rerun inferior after killing it.
+
+Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
+ structure value address is found in $a0 now.
+ * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
+
+Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
+ returned in $a0.
+ (EXTRACT_RETURN_VALUE): Likewise.
+
+ * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
+ insn at "pc", not "fi->pc".
+
+start-sanitize-tic80
+Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
+ (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
+ MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
+ (NPC_REGNUM): Tic80 has a delay slot.
+ (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
+ register blocks.
+
+end-sanitize-tic80
+Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
+ returned in $a0.
+ (EXTRACT_RETURN_VALUE): Likewise.
+
+Tue Apr 22 11:58:15 1997 Fred Fish <fnf@cygnus.com>
+
+ * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
+ floatformat_ieee_double_littlebyte_bigword for little endian
+ target byte order.
+ * utils.c (floatformat_to_doublest): Create local preswapped
+ copy of input for floatformat_littlebyte_bigword formats.
+ (get_field, put_field): Treat floatformat_littlebyte_bigword
+ the same as floatformat_little.
+ (floatformat_from_doublest): Postswap output words for
+ the floatformat_littlebyte_bigwords format.
+
+start-sanitize-tic80
+Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tic80/tic80.mt (SIM): Link in simulator.
+
+end-sanitize-tic80
+Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
+ config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
+ vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
+ aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
+start-sanitize-v850
+ config/v850/v850.mt:
+end-sanitize-v850
+ Remove -lm. That's now handled by configure.
+
+ * Makefile.in (maintainer-clean): Add distclean to dependencies.
+ Remove duplicate rm's of files.
+
+start-sanitize-gdbtk
+Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
+
+end-sanitize-gdbtk
+Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * remote-pa.c: Remove. It's broken and no longer necessary.
+
+Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
+
+ * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
+ (Avoids name clash with broken AIX header files.)
+
Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* serial.c (serial_log_command): Fix fputs_unfiltered calls.
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
- * (readchar): Improve doc. Handle random serial errors.
- * (expect): Disable notice_quit code. It's busted. Remove
+ (readchar): Improve doc. Handle random serial errors.
+ (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
- * (e7000_parse_device): Remove serial_flag arg. It's not
+ (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
- * (e7000_open): Split into two pieces. Second part is
+ (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
- * (gch): Remove debug output. That's handled by readchar.
- * (e7000_read_inferior_memory): Handle errors better.
- * (_initialize_remote_e7000): Get rid of `<xxx>' things from
+ (gch): Remove debug output. That's handled by readchar.
+ (e7000_read_inferior_memory): Handle errors better.
+ (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
- * ser-e7kpc.c: Remove the last seven months of brain damage. Get
- rid of the DLL's since we can access the device directly from Win32s
- and Win95. Get rid of debugify crud.
+ * ser-e7kpc.c: Get rid of the DLL's since we can access the device
+ directly from Win32s and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (install-only): Make list of gdbtcl files to install
- explicit - was picking up files such as CVS ChangeLog etc.
+ explicit - was picking up files such as ChangeLog etc.
(install-only): Don't blindly create the directory.
end-sanitize-gdbtk
* defs.h (enum language): Add language_java.
* java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
- * Makefile.in: Upadte for new files.
+ * Makefile.in: Update for new files.
* objfiles.c (allocate_objfile): Allow NULL bfd argument.
* symfile.c (deduce_language_from_filename): Recognize .java.
* Makefile.in (distclean): Remove .gdbinit.
start-sanitize-tic80
-Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
+Fri Mar 28 15:37:30 1997 Fred Fish <fnf@cygnus.com>
* config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
LIBS.
end-sanitize-gdbtk
-
Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
First cut at supporting simulators in gdbserver:
Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
- * remote-vx.c (vx_attach): Fix for PR 11356. Remove code added
- by kung. It made no sense.
+ * remote-vx.c (vx_attach): Remove code added by kung. It made no
+ sense.
Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
* c-valprint.c (c_val_print): Fix printing for arrays defined
- with 0 length. A sticky tag caused this fix from
- revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
- state: Exp; lines: +1 -0 branches: 2.32.34;
- to not make it into devo.
+ with 0 length.
Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
(value_arg_coerce): Similarly.
(value_of_variable): Provide dummy initialization of "frame".
+start-sanitize-gdbtk
Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
* gdbtk.c (call_wrapper): Clear running_now if an error occurs.
- This fixes PR 11323, where gdbtk stops responding if an error occurs.
+end-sanitize-gdbtk
Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
* xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
* m32r-stub.c: New -- remote protocol support for M32R cpu.
* m32r-rom.c: Several experiments with improved download time.
- * .Sanitize: Add entry for m32r-stub.c
Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>