+2015-03-24 Pedro Alves <palves@redhat.com>
+
+ * breakpoint.c (until_break_command): Adjust call to proceed.
+ * gdbthread.h (struct thread_control_state) <stepping_command>:
+ New field.
+ * infcall.c (run_inferior_call): Adjust call to proceed.
+ * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
+ Adjust calls to proceed.
+ (set_step_frame): Set the current thread's step_start_function
+ here.
+ (step_once): Adjust calls to proceed.
+ (jump_command, signal_command, until_next_command)
+ (finish_backward, finish_forward, proceed_after_attach_callback)
+ (attach_command_post_wait): Adjust calls to proceed.
+ * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
+ (do_target_resume): New function, factored out from ...
+ (resume): ... here. Remove 'step' parameter. Instead, check
+ currently_stepping to determine whether the thread should be
+ single-stepped.
+ (proceed): Remove 'step' parameter and don't set the thread's
+ step_start_function here. Adjust call to 'resume'.
+ (handle_inferior_event): Adjust calls to 'resume'.
+ (switch_back_to_stepped_thread): Use do_target_resume instead of
+ 'resume'.
+ (keep_going): Adjust calls to 'resume'.
+ * infrun.h (proceed): Remove 'step' parameter.
+ (resume): Likewise.
+ * windows-nat.c (do_initial_windows_stuff): Adjust call to
+ 'resume'.
+ * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
+
+2015-03-24 Pedro Alves <palves@redhat.com>
+
+ * gdbthread.h (struct thread_control_state) <stepping_command>:
+ New field.
+ * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
+ the thread's stepping_command field.
+ * infrun.c (resume): Check the thread's stepping_command flag to
+ determine which threads should be resumed. Rename 'entry_step'
+ local to user_step.
+ (clear_proceed_status_thread): Clear 'stepping_command'.
+ (schedlock_applies): Change parameter type to struct thread_info
+ pointer. Adjust.
+ (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
+ (switch_back_to_stepped_thread): Adjust calls to
+ 'schedlock_applies'.
+ (_initialize_infrun): Adjust "set scheduler-locking step" help.
+
+2015-03-24 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (step_start_function): Delete and ...
+ * gdbthread.h (struct thread_control_state) <step_start_function>:
+ ... now a field here.
+ * infrun.c (clear_proceed_status_thread): Clear the thread's
+ step_start_function.
+ (proceed, process_event_stop_test, print_stop_event): Adjust.
+
+2015-03-24 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (proceed): No longer handle negative step.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * nat/x86-linux.h (x86_linux_new_thread): New declaration.
+ (x86_linux_prepare_to_resume): Likewise.
+ * x86-linux-nat.c (x86_linux_new_thread):
+ Moved to nat/x86-linux.c.
+ (x86_linux_prepare_to_resume): Likewise.
+ * nat/x86-linux.c (x86_linux_new_thread): New function.
+ (x86_linux_prepare_to_resume): Likewise.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * nat/x86-linux-dregs.h: New file.
+ * nat/x86-linux-dregs.c: Likewise.
+ * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
+ (x86-linux-dregs.o): New rule.
+ * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
+ * config/i386/linux64.mh (NATDEPFILES): Likewise.
+ * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
+ (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
+ (x86_linux_dr_get): Likewise.
+ (x86_linux_dr_set): Likewise.
+ (x86_linux_dr_get_addr): Likewise.
+ (x86_linux_dr_get_control): Likewise.
+ (x86_linux_dr_get_status): Likewise.
+ (update_debug_registers_callback): Likewise.
+ (x86_linux_dr_set_control): Likewise.
+ (x86_linux_dr_set_addr): Likewise.
+ (x86_linux_update_debug_registers): Likewise.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * x86-linux-nat.c (x86_linux_update_debug_registers):
+ New function, factored out from...
+ (x86_linux_prepare_to_resume): ...this.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * x86-linux-nat.c (x86_linux_dr_get): Update comments.
+ (x86_linux_dr_set): Likewise.
+ (x86_linux_dr_get_addr): Likewise.
+ (x86_linux_dr_get_control): Likewise.
+ (x86_linux_dr_get_status): Likewise.
+ (update_debug_registers_callback): Likewise.
+ (x86_linux_dr_set_control): Likewise.
+ (x86_linux_dr_set_addr): Likewise.
+ (x86_linux_prepare_to_resume): Likewise.
+ (x86_linux_new_thread): Likewise.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
+ (x86_linux_new_thread): Rename argument.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * nat/x86-linux.h: New file.
+ * nat/x86-linux.c: Likewise.
+ * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
+ (x86-linux.o): New rule.
+ * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
+ * config/i386/linux64.mh (NATDEPFILES): Likewise.
+ * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
+ (lwp_set_arch_private_info): New declaration.
+ (lwp_arch_private_info): Likewise.
+ * linux-nat.c (lwp_set_arch_private_info): New function.
+ (lwp_arch_private_info): Likewise.
+ * x86-linux-nat.c: Include nat/x86-linux.h.
+ (arch_lwp_info): Removed structure.
+ (update_debug_registers_callback):
+ Use lwp_set_debug_registers_changed.
+ (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
+ and lwp_set_debug_registers_changed.
+ (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * nat/linux-nat.h (ptid_of_lwp): New declaration.
+ (lwp_is_stopped): Likewise.
+ (lwp_stop_reason): Likewise.
+ * linux-nat.c (ptid_of_lwp): New function.
+ (lwp_is_stopped): Likewise.
+ (lwp_is_stopped_by_watchpoint): Likewise.
+ * x86-linux-nat.c (update_debug_registers_callback):
+ Use lwp_is_stopped.
+ (x86_linux_prepare_to_resume): Use ptid_of_lwp and
+ lwp_stop_reason.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * linux-nat.h (linux_stop_lwp): Move declaration to...
+ * nat/linux-nat.h (linux_stop_lwp): New declaration.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * linux-nat.h: Include nat/linux-nat.h.
+ (iterate_over_lwps): Move declaration to nat/linux-nat.h.
+ * nat/linux-nat.h (struct lwp_info): New forward declaration.
+ (iterate_over_lwps_ftype): New typedef.
+ (iterate_over_lwps): New declaration.
+ * linux-nat.h (iterate_over_lwps): Update comment. Use
+ iterate_over_lwps_ftype. Update callback return value check.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * x86-nat.h (x86_debug_reg_state): Move declaration to...
+ * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
+
+2015-03-24 Gary Benson <gbenson@redhat.com>
+
+ * nat/linux-nat.h (current_lwp_ptid): New declaration.
+ * linux-nat.c (current_lwp_ptid): New function.
+ * x86-linux-nat.c: Include nat/linux-nat.h.
+ (x86_linux_dr_get_addr): Use current_lwp_ptid.
+ (x86_linux_dr_get_control): Likewise.
+ (x86_linux_dr_get_status): Likewise.
+ (x86_linux_dr_set_control): Likewise.
+ (x86_linux_dr_set_addr): Likewise.
+
+2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
+
+ PR breakpoints/16466
+ * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
+
+2015-03-23 Joel Brobecker <brobecker@adacore.com>
+
+ * ser-mingw.c (ser_windows_setparity): Fix indentation.
+ * ser-unix.c (hardwire_setparity): Likewise.
+
+2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
+
+ * NEWS: Mention set/show serial parity command.
+ * monitor.c (monitor_open): Call serial_setparity.
+ * remote.c (remote_open_1): Likewise.
+ * ser-base.c (ser_base_serparity): New function.
+ * ser-base.h (ser_base_setparity): Add declaration.
+ * ser-go32.c (dos_ops): Set "setparity" field.
+ * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
+ state.Parity.
+ (ser_windows_setparity): New function.
+ (hardwire_ops): Add ser_windows_setparity.
+ (tty_ops): Add NULL for setparity field.
+ (pipe_ops): Add ser_base_setparity.
+ (tcp_ops): Likewise.
+ * ser-pipe.c (pipe_ops): Likewise.
+ * ser-tcp.c (tcp_ops): Likewise.
+ * ser-unix.c (hardwire_setparity): Add declaration.
+ (hardwire_raw): Don't reset PARENB flag.
+ (hardwire_setparity): New function.
+ (hardwire_ops): Add hardwire_setparity.
+ * serial.c (serial_setparity): New function.
+ (serial_parity): New global.
+ (parity_none, parity_odd, parity_even, parity_enums, parity):
+ New static globals.
+ (set_parity): New function.
+ (_initialize_serial): Add set/show serial parity commands.
+ * serial.h (GDBPARITY_NONE): Define.
+ (GDBPARITY_ODD): Define.
+ (GDBPARITY_EVEN): Define.
+ (serial_setparity) Add declaration.
+ (struct serial_ops): Add setparity field.
+ * target.h (serial_parity): Add declaration.
+
+2015-03-23 Keith Seitz <keiths@redhat.com>
+
+ * linespec.c (linespec_lexer_lex_keyword): Update comment.
+
+2015-03-23 Keith Seitz <keiths@redhat.com>
+
+ * breakpoint.c (parse_breakpoint_sals): Use
+ linespec_lexer_lex_keyword to ascertain if the user specified
+ a NULL location.
+ * linespec.c [IF_KEYWORD_INDEX]: Define.
+ (linespec_lexer_lex_keyword): Export.
+ (struct ls_parser) <keyword_ok>: Remove.
+ A keyword is only a keyword if not followed by another keyword.
+ (linespec_lexer_lex_one): Remove keyword_ok handling.
+ Add comment explaining why the parsing stream is not advanced
+ when a keyword is seen.
+ (parse_linespec): Remove parser->keyword_ok.
+ * linespec.h (linespec_lexer_lex_keyword): Add declaration.
+
+2015-03-23 Keith Seitz <keiths@redhat.com>
+
+ PR gdb/18021
+ * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
+ if we find a static method with DW_AT_vtable_elem_location.
+
+2015-03-21 Eli Zaretskii <eliz@gnu.org>
+
+ * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
+ before the second loop, to avoid undefined behavior. Reported by
+ Anton Blanchard <anton@samba.org>.
+
+2015-03-20 Keven Boell <keven.boell@intel.com>
+
+ * gdbtypes.c (resolve_dynamic_type_internal): Adapt
+ data_location usage to linked list.
+ (resolve_dynamic_type_internal): Adapt data_location to
+ linked list.
+ (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
+ (copy_type_recursive, copy_type): Add copy of linked list.
+ * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
+ (struct dynamic_prop_list): New struct.
+ * dwarf2read.c (set_die_type): Set data_location data.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
+ inner block and make it const.
+ * machoread.c (get_archive_prefix_len): Make "lparen" const.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
+ * breakpoint.h (set_breakpoint_condition): Update declaration.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
+ (nto_init_solib_absolute_prefix): Likewise.
+
+2015-03-20 Pedro Alves <palves@redhat.com>
+
+ * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
+ * spu-tdep.c (spu_gdbarch_init): Make "name" const.
+
+2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ * config/djgpp/README: Remove gdb.hp.
+
+2015-03-20 Yao Qi <yao.qi@linaro.org>
+
+ * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
+ set_gdbarch_cannot_step_breakpoint.
+
+2015-03-19 Pedro Alves <palves@redhat.com>
+
+ * linux-nat.c (linux_resume_one_lwp): Rename to ...
+ (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
+ instead call perror_with_name.
+ (check_ptrace_stopped_lwp_gone): New function.
+ (linux_resume_one_lwp): Reimplement as wrapper around
+ linux_resume_one_lwp_throw that swallows errors if the LWP is
+ gone.
+ (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
+ swallows errors if the LWP is gone. Use
+ linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
+
+2015-03-19 Pedro Alves <palves@redhat.com>
+
+ * linux-nat.c (status_callback): Return early if the LWP has no
+ status pending.
+
+2015-03-19 Pedro Alves <palves@redhat.com>
+
+ * linux-nat.c (select_event_lwp_callback): Update comment to no
+ longer mention SIGTRAP.
+
+2015-03-18 Tristan Gingold <gingold@adacore.com>
+
+ * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
+ redirection code to ...
+ (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
+ checks. Fix SAVE_NONVOL operations. Add debug code and comments.
+
+2015-03-18 Gary Benson <gbenson@redhat.com>
+
+ (remote_protocol_features): Remove the "vFile:fstat" feature.
+ (remote_hostio_fstat): Probe for "vFile:fstat" support.
+
+2015-03-11 Yao Qi <yao.qi@linaro.org>
+
+ PR tdep/18107
+ * aarch64-linux-tdep.c: Include xml-syscall.h
+ (aarch64_linux_get_syscall_number): New function.
+ (aarch64_linux_init_abi): Call
+ set_gdbarch_get_syscall_number.
+ * syscalls/aarch64-linux.xml: New file.
+
+2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
+
+ * ser-base.h (ser_base_setstopbits): Change second argument name
+ from "rate" to "num".
+
+2015-03-17 Gary Benson <gbenson@redhat.com>
+ Luke Allardyce <lukeallardyce@gmail.com>
+
+ PR gdb/18131
+ * common/common-remote-fileio.h (sys/stat.h): New include.
+ (stuct stat): Remove forward declaration.
+
+2015-03-16 John Baldwin <jhb@FreeBSD.org>
+
+ * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
+ before writing core register notes.
+
+2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
+ Pedro Alves <palves@redhat.com>
+
+ * gdb_curses.h (tgetnum): Mark with EXTERN_C.
+ * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
+ (tgoto): Wrap with extern "C".
+
+2015-03-16 Pedro Alves <palves@redhat.com>
+ Yuanhui Zhang <asmwarrior@gmail.com>
+
+ * stub-termcap.c (tputs): Change prototype.
+
+2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
+ Pedro Alves <palves@redhat.com>
+
+ * windows-nat.c (struct thread_info_struct): Rename to ...
+ (struct windows_thread_info_struct): ... this.
+ (thread_info): Rename to ...
+ (windows_thread_info): ... this.
+ All users updated.
+
+2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
+ Pedro Alves <palves@redhat.com>
+
+ * NEWS: New Removed targets and native configurations.
+
+2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Remove HPUX.
+ * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
+ (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
+ (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
+ ia64-hpux-tdep.h, solib-ia64-hpux.h.
+ (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
+ ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
+ * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
+ hppa-hpux-tdep.c.
+ * config/ia64/hpux.mh: Remove file.
+ * config/pa/hpux.mh: Remove file.
+ * configure: Rebuilt.
+ * configure.ac (dlgetmodinfo, somread.o): Remove.
+ * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
+ (ia64-*-hpux*): Remove its float format exception.
+ * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
+ * hppa-hpux-nat.c: Remove file.
+ * hppa-hpux-tdep.c: Remove file.
+ * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
+ Move them here from hppa-tdep.h
+ (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
+ (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
+ * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
+ Move them to hppa-tdep.c.
+ (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
+ declarations.
+ * ia64-hpux-nat.c: Remove file.
+ * ia64-hpux-tdep.c: Remove file.
+ * ia64-hpux-tdep.h: Remove file.
+ * inf-ttrace.c: Remove file.
+ * inf-ttrace.h: Remove file.
+ * solib-ia64-hpux.c: Remove file.
+ * solib-ia64-hpux.h: Remove file.
+ * solib-pa64.c: Remove file.
+ * solib-pa64.h: Remove file.
+ * solib-som.c: Remove file.
+ * solib-som.h: Remove file.
+ * somread.c: Remove file.
+
+2015-03-13 John Baldwin <jhb@FreeBSD.org>
+
+ * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
+ * config.in: Regenerate.
+ * configure: Regenerate.
+ * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
+ define.
+ (fbsd_find_memory_regions): Use kinfo_getvmmap to
+ enumerate memory regions if present.
+
+2015-03-13 John Baldwin <jhb@FreeBSD.org>
+
+ * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
+ * i386fbsd-tdep.c: Fix style in various gdb_static_assert
+ expressions.
+ (i386fbsd_sigtramp_p): Likewise.
+
+2015-03-12 John Baldwin <jhb@FreeBSD.org>
+
+ * MAINTAINERS (Write After Approval): Add John Baldwin.
+
+2015-03-12 Gary Benson <gbenson@redhat.com>
+
+ * solib.c (_initialize_solib): Make "set/show sysroot" use
+ add_setshow_optional_filename_cmd so it can be restored to
+ empty after being set.
+
+2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * Makefile.in (SFILES): New source break-catch-syscall.c.
+ (COMMON_OBS): New object break-catch-syscall.o.
+ * break-catch-syscall.c: New file.
+ * breakpoint.c: Remove inclusion of "xml-syscall.h".
+ (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
+ (struct syscall_catchpoint): Likewise.
+ (dtor_catch_syscall): Likewise.
+ (catch_syscall_inferior_data): Likewise.
+ (struct catch_syscall_inferior_data): Likewise.
+ (get_catch_syscall_inferior_data): Likewise.
+ (catch_syscall_inferior_data_cleanup): Likewise.
+ (insert_catch_syscall): Likewise.
+ (remove_catch_syscall): Likewise.
+ (breakpoint_hit_catch_syscall): Likewise.
+ (print_it_catch_syscall): Likewise.
+ (print_one_catch_syscall): Likewise.
+ (print_mention_catch_syscall): Likewise.
+ (print_recreate_catch_syscall): Likewise.
+ (catch_syscall_breakpoint_ops): Likewise.
+ (syscall_catchpoint_p): Likewise.
+ (create_syscall_event_catchpoint): Likewise.
+ (catch_syscall_split_args): Likewise.
+ (catch_syscall_command_1): Likewise.
+ (is_syscall_catchpoint_enabled): Likewise.
+ (catch_syscall_enabled): Likewise.
+ (catching_syscall_number): Likewise.
+ (catch_syscall_completer): Likewise.
+ (clear_syscall_counts): Likewise.
+ (initialize_breakpoint_ops): Move initialization of syscall
+ catchpoints to break-catch-syscall.c.
+ (_initialize_breakpoint): Move code related to syscall catchpoints
+ to break-catch-syscall.c.
+
+2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * breakpoint.c (breakpoint_find_if): New function.
+ * breakpoint.h (breakpoint_find_if): New prototype.
+
+2015-03-11 Gary Benson <gbenson@redhat.com>
+
+ * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
+ * remote-fileio.c (remote_fileio_to_host_uint): New function.
+ (remote_fileio_to_host_ulong): Likewise.
+ (remote_fileio_to_host_mode): Likewise.
+ (remote_fileio_to_host_time): Likewise.
+ (remote_fileio_to_host_stat): Likewise.
+ * remote.c (PACKET_vFile_fstat): New enum value.
+ (remote_protocol_features): Register the "vFile:fstat" feature.
+ (remote_hostio_fstat): New function.
+ (remote_bfd_iovec_stat): Use the above.
+ (_initialize_remote): Register new "set/show remote
+ hostio-fstat-packet" command.
+ * symfile.c (separate_debug_file_exists): Update comment.
+ * NEWS: Announce new vFile:fstat packet.
+
+2015-03-11 Gary Benson <gbenson@redhat.com>
+
+ * common/common-remote-fileio.h: New file.
+ * common/common-remote-fileio.c: Likewise.
+ * Makefile.in (SFILES): Add common/common-remote-fileio.c.
+ (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
+ (COMMON_OBS): Add common-remote-fileio.o.
+ (common-remote-fileio.o): New rule.
+ * remote-fileio.h (common-remote-fileio.h): New include.
+ * remote-fileio.c (gdb/fileio.h): Do not include.
+ (remote_fileio_to_be): Moved to common-remote-fileio.h.
+ (remote_fileio_to_fio_uint): Likewise.
+ (remote_fileio_to_fio_time): Likewise.
+ (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
+ (remote_fileio_to_fio_mode): Likewise.
+ (remote_fileio_to_fio_ulong): Likewise.
+ (remote_fileio_to_fio_stat): Likewise.
+
+2015-03-11 Andy Wingo <wingo@igalia.com>
+
+ * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
+ we were checking the cached type, not the cached dynamic type.
+
2015-03-11 Andy Wingo <wingo@igalia.com>
* guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
projects / deliverable / binutils-gdb.git / blobdiff