-Mon Aug 23 10:16:32 1999 Jeffrey A Law (law@cygnus.com)
-
- * pa64solib.c: Fix some minor whitespace problems.
- (bfd_lookup_symbol): New function.
- (pa64_solib_create_inferior_hook): Find the address __dld_break
- in the dynamic linker. Try to set a shlib event breakpoint in
- that function.
- (add_to_solist): Do not add the same shared library to the shlib
- list more than once.
-
-Sun Aug 22 14:49:40 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * value.h (enum lval_type): Move declaration from here.
- * defs.h (enum lval_type): To here.
- * frame.h, gdbarch.h: Delete incomplete declaration of ``enum
- lval_type''.
-
-1999-08-20 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * breakpoint.c (can_use_hardware_watchpoint): reject expressions
- that refer to registers or register variables.
-
-Fri Aug 20 10:53:38 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-tdep.c (hppa_fix_call_dummy): Provide PA2.0W aware code.
-
- * pa64solib.c pa64solib.h: New files.
-
- * config/pa/hppa64.mt: Delete commented out code that is and
- never will be appropriate for this target.
- * config/pa/hpux11w.mt (TDEPFILES): Remove SOM references. Also
- remove pa64solib.o.
- * config/pa/hpux11w.mh (NATDEPFILES): Remove SOM references.
-
- * configure.host; Use "hpux11w" and "hpux11" instead of
- "hpux1100w" and "hpux1100" respectively
- * config/pa/hpux11w.mh: Renamed from hpux1100w.mh.
- * config/pa/hpux11w.mt, config/pa/hpux11.mh: Likewise.
- * config/pa/hpux11.mt: Likewise.
-
-1999-08-19 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * breakpoint.h (target_hw_bp_type): new enum.
- * breakpoint.c (insert_breakpoints): use enum instead of consts.
- (remove_breakpoint): use enum instead of consts.
- [Also clean up a bunch of excessively long lines.]
-
-1999-08-19 J.T. Conklin <jtc@redback.com>
-
- * i386-stub.c (waitabit): Removed.
- (breakpoint): Update.
-
- * i386-stub.c, m32r-stub.c, sparc-stub.c, sparcl-stub.c,
- sparclet-stub.c (set_debug_traps): Don't send gratuitous ACK.
-
- * m68k-stub.c (putpacket): Restore code so that packets are sent
- until an ACK is received.
-
-1999-08-19 Eli Zaretskii <eliz@is.elta.co.il>
-
- * breakpoint.c (bpstat_stop_status): Accept triggered addresses
- anywhere inside the region occupied by a watched variable as a
- sign that the watchpoint fired. Don't stop if some watchpoint
- was triggered, but its address doesn't match the address of this
- watchpoint.
- (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New macro.
- Default definition is to call TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT.
- (can_use_hardware_watchpoint): Call TARGET_REGION_OK_FOR_HW_WATCHPOINT;
- if it returns zero, return zero immediately.
- (insert_breakpoints): Try to insert watchpoints for all the values
- on the value chain, even if some of them fail to insert. Remove
- the breakpoint if parts of its value chain couldn't be inserted.
-
-1999-08-19 Eli Zaretskii <eliz@is.elta.co.il>
-
- * go32-nat.c (go32_stopped_by_watchpoint): Remove unused code.
-
-1999-08-19 Eli Zaretskii <eliz@is.elta.co.il>
-
- * go32-nat.c (tcgetpgrp, tcsetpgrp): New functions.
-
-1999-08-19 Eli Zaretskii <eliz@is.elta.co.il>
-
- * go32-nat.c (go32_wait): If we are in a single-step mode, and the
- next instruction is INT nn or INTO, use a temporary breakpoint to
- simulate single-step mode, and reset the trace flag.
-
-1999-08-19 Eli Zaretskii <eliz@is.elta.co.il>
-
- * go32-nat.c (wp_op): New typedef.
- (SHOW_DR): Print the length of watched region as well.
- (go32_insert_aligned_watchpoint): Remove unused argument PID. All
- callers and the prototype changed.
- (go32_handle_nonaligned_watchpoint): Renamed from
- go32_insert_nonaligned_watchpoint. Now handles all operations on
- non-aligned watchpoints: insertion, deletion, and counting. If
- called with wp_count as the first argument, return the count of
- debug registers needed to watch the region. Don't break out of
- the loop before all the addresses in the region are processed.
- (go32_remove_watchpoint): Call go32_remove_aligned_watchpoint to
- do the actual work.
- (go32_remove_aligned_watchpoint): New function, modeled after
- go32_insert_aligned_watchpoint. Removes watchpoints that watch
- regions of arbitrary length by calling
- go32_handle_nonaligned_watchpoint as needed.
- (go32_region_ok_for_watchpoint): New function, called from
- can_use_hardware_watchpoint via the new macro
- TARGET_REGION_OK_FOR_HW_WATCHPOINT.
-
- * config/i386/nm-go32.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT):
- Define to call go32_region_ok_for_watchpoint.
- (DECR_PC_AFTER_HW_BREAK): Define back to zero (previous redefinition
- to 1 was due to a bug in go32-nat.c).
-
-1999-08-19 Eli Zaretskii <eliz@is.elta.co.il>
-
- * go32-nat.c (cleanup_dregs): New function.
- (go32_mourn_inferior): Call it.
- (IS_REG_FREE, LOCAL_ENABLE_REG, GLOBAL_ENABLE_REG, DISABLE_REG,
- SET_BREAK, SET_WATCH, IS_WATCH, WATCH_HIT): Protect arguments with
- parentheses.
- (SET_BREAK): Increment the debug register's reference count.
- (DR_DEF): New macro, returns the access and length bits of the
- breakpoint.
- (SHOW_DR): Print the reference count of each register. Disable or
- enable print-out depending on an environment variable GDB_SHOW_DR.
- (go32_insert_aligned_watchpoint): Look for an occupied debug
- register with the same address and access/length bits, and reuse
- it by incrementing reference the count, before occupying another
- register. Return zero upon success.
- (go32_insert_nonaligned_watchpoint): Pass the read/write bits to
- go32_remove_watchpoint.
- (go32_remove_watchpoint): Accept an additional parameter: the
- read/write bits of the watchpoint to remove, and only remove a
- watchpoint if it's occupied and its address and read/write bits
- match. Only disable the register if its reference count is zero;
- otherwise just decrease the reference count.
- (go32_remove_hw_breakpoint): Only decrease reference count and
- disable the debug register if it is occupied and its access bits
- match those of an instruction breakpoint.
- (go32_insert_hw_breakpoint): Before occupying another debug
- register, look for an already occupied register that defines an
- instruction breakpoint with the same address. If found, increment
- its reference count. Call SHOW_DR even if failed to insert a
- breakpoint.
-
- * config/i386/nm-go32.h (target_remove_watchpoint): Accept the
- TYPE argument as well.
-
-Wed Aug 18 17:47:25 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mips-tdep.c: Add more comments.
-
-1999-08-17 Stan Shebs <shebs@andros.cygnus.com>
-
- * blockframe.c: Don't use PARAMS anymore, remove obsolete comment
- about frameless functions.
-
-1999-08-16 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * thread.c (delete_thread): delete any step_resume breakpoint
- held by the thread. (prune_threads): call delete_thread.
- * breakpoint.c (breakpoint_init_inferior): if startup, then
- delete any remaining step_resume breakpoints.
- * infrun.c (handle_inferior_event): add cautionary comment.
-
-1999-08-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * remote.c (remote_async_mourn): New function. Async version of
- remote_mourn().
-
-1999-08-16 Eli Zaretskii <eliz@is.elta.co.il>
-
- * terminal.h [__GO32__]: Remove conditional; DJGPP now supports
- termios.
-
-1999-08-16 Eli Zaretskii <eliz@is.elta.co.il>
-
- * command.c (CANT_FORK) [__MSDOS__]: Define.
- (shell_escape) [CANT_FORK]: If ARG is NULL, pass an empty string
- to `system'.
- [__DJGPP__]: Return to the original directory after the shell
- exits.
-
-1999-08-16 Eli Zaretskii <eliz@is.elta.co.il>
-
- * config/i386/xm-go32.h (ROOTED_P): Don't reference X[1] if X[0]
- is a null character.
-
- * config/i386/nm-go32.h (DECR_PC_AFTER_HW_BREAK): Define to 1.
-
-1999-08-16 Eli Zaretskii <eliz@is.elta.co.il>
-
- * go32-nat.c (redir_cmdline_parse, redir_cmdline_delete,
- redir_to_child, redir_to_debugger, redir_debug_init)
- [__DJGPP_MINOR__ < 3]: Dummy stubs for redirecting debuggee's
- standard handles.
- (print_387_status): Print "last FP instruction", not "last
- exception". Restore the upper 5 bits of the opcode that aren't
- stored in the FPU state. Print the FPU stack in its physical
- order, not relative to ST(0). Print "special", not "trap" for
- unnormals and infinities. Print all 10 bytes of each FP register,
- and print them with 19 significant digits.
- (regno_mapping): Make the mapping consistent with tm-go32.h.
- (sig_map): Add mappings for SIGQUIT, SIGFPE, SIGALRM. Map NMI to
- SIGBUS.
- (excep_map): New variable, maps GDB signals to DJGPP exceptions.
- (go32_attach): Signal an error: we cannot attach to other
- processes.
- (go32_resume): Record the signal with which the inferior should be
- resumed, mapped to the DJGPP exception number.
- (go32_wait): Pass the signal recorded in go32_resume to the
- debuggee. Save and restore debugger's and debuggee's current
- working directory.
- [__DJGPP_MINOR__ < 3]: Save and restore inferior's FPU state.
- (store_register): FPU regsiters have numbers less than 31.
- (go32_kill_inferior): Delete the parsed command-line storage.
- (go32_create_inferior): Initialize the parsed command-line
- storage. Parse the command line and create the redirections for
- inferior's standard handles.
- [__DJGPP_MINOR__ < 3]: Init the inferior's FPU state.
- (ignore2): Function deleted.
- (device_mode): New function, switches a character device between
- raw and cooked mode.
- (go32_terminal_init): Invalidate the raw/cooked mode information.
- (go32_terminal_info): Print whether the inferior's terminal is in
- raw or cooked mode.
- [__DJGPP_MINOR__ > 2]: Say if standard handles are redirected or
- closed by the inferior.
- (go32_terminal_inferior): Switch standard handles to the
- inferior's files/devices. Put the inferior's input device to
- raw/cooked mode, exactly like we found it last time.
- (go32_terminal_ours): Restore debugger's standard handles and put
- the terminal into cooked mode. Save the mode of inferior's input
- device.
- (init_go32_ops): Assign go32_ops.to_attach,
- go32_ops.to_terminal_info, go32_ops.to_terminal_ours_for_output.
- Initialize inferior's cwd and the command-line storage.
-
-Mon Aug 16 14:29:30 1999 Jeffrey A Law (law@cygnus.com)
-
- * config/pa/tm-hppa.h (ARGS_GROW_DOWNWARD): Define.
- * config/pa/tm-hppa64.h (ARGS_GROW_DOWNWARD): Undefine.
- * hppa-tdep.c (hppa_push_arguments): Handle arguments growing in
- both directions depending ARGS_GROW_DOWNWARD.
- (hppa_find_saved_regs): Update for 64bit wide registers & pointers
- and PA64 ABI.
-
- * hppa-tdep.c (hppa_pop_frame): Various fixes for 64bit wide
- registers and pointers.
- (hppa_fix_call_dummy, skip_trampoline_code): Likewise.
- (restore_pc_queue): Update tests for width of memory loads.
- (hppa_push_arguments): Delete version that was #if 0'd out.
-
- * hppa-tdep.c (push_dummy_frame): Handle the new 64it ABI.
- (find_dummy_frame_regs): Corresponding changes.
-
- * hppa-tdep.c (read_unwind_info): Initialize obj_private->dp.
- (internalize_unwinds): Improve test for when to use segment
- relative code for unwinder bounds.
- (rp_saved): Fix offset of saved return pointer for the 64bit ABI.
- (hppa_frame_saved_pc): Various updates to handle 64bit registers
- and pointers.
- (frame_chain, restore_pc_queue): Likewise.
-
- * hppa-tdep.c (rp_saved): RP is saved at frame-16 when
- pointers are 64bits wide.
-
- * hppa-tdep.c (record_text_segment_lowaddr): New function.
- (internalize_unwinds): Use it if addressess are 8 bytes wide.
-
- * symfile.c (syms_from_objfile): No longer warn if the lowest
- section does not have SEC_CODE set.
-
- * Makefile.in (pa64solib.o): Add dependencies.
-
- * hppah-nat.c (store_inferior_registers): Do not try to write a
- nonzero value to the high part of IPSW. Fix typo in unable to store
- warning.
-
- * config/pa/tm-hppa.h (opd_data structure): Delete. Not actually
- needed.
- (struct obj_private_struct): Add new entry for the objfile's DP
- value.
- * config/pa/tm-hppa64.h (CALL_DUMMY): Add a nop to make it an even
- number of instructions. Pack the dummy into word sized hunks.
- (CALL_DUMMY_LENGTH): Update appropriately.
- (PC_IN_CALL_DUMMY, CALL_DUMMY_LOCATION_AFTER_TEXT_END): Delete.
-
-Mon Aug 16 19:08:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * configure.in: Try -lsocket when looking for socketpair.
- * configure, config.h: Re-generate.
-
-1999-08-13 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- From Christopher Faylor <cgf@cygnus.com>:
-
- * event-loop.c (gdb_wait_for_event): Before going to wait for
- another event with select or poll, flush the error and the output
- streams.
-
- * event-top.c (gdb_readline2): Do not buffer the input, because
- doing so can interfere with select/poll in bad ways.
-
-Fri Aug 13 17:36:56 1999 Eli Zaretskii <eliz@is.elta.co.il>
-
- * maint.c (maintenance_dump_me) [__DJGPP__]: Simulate a core dump
- with SIGABRT.
- * utils.c (quit) [__MSDOS__]: Don't mention SIGINT, since it's not
- gonna happen.
- (notice_quit): No need to define this function for the DJGPP port.
-
-1999-08-13 James Ingham <jingham@leda.cygnus.com>
-
- * arm-tdep.c (arm_frameless_function_invocation): SKIP_PROLOGUE
- macro no longer modifies its argument. Update uses to accord.
-
- * config/arm/arm.mt (TDEPFILES): Add the remote-rdi.o to the
- TDEPFILES.
- * configure.tgt: Add rdi-share to configdir for the Arm targets.
-
-Fri Aug 13 11:16:32 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppah-nat.c (store_inferior_registers): Revamp to be PA2.0W
- aware.
-
- * infttrace.c (ttrace_write_reg_64): New function.
-
- * hp-symtab-read.c (is_in_import_list): Delete extern declaration.
- * somread.c (is_in_import_list): Delete function.
- * objfiles.c (is_in_import_list): New function.
- * objfiles.h (is_in_import_list): Declare.
-
- * config/pa/tm-hppa64.h (GDB_TARGET_IS_HPPA20W): Define before
- including tm-hppah.h.
- (PC_IN_CALL_DUMMY): Define.
- (HPUX_1100): Similarly.
- * config/pa/tm-hppa.h (somsolib.h, pa64solib.h): Conditionalize
- includes on GDB_TARGET_IS_HPPA20W.
-
- * configure.host: Distinguish between wide and narrow modes
- for hpux11.
- * config/pa/hpux1100w.mh, config/pa/hpux1100w.mt: New files.
-
- * config/pa/tm-hppa64.h (STACK_ALIGN): Redefine.
- (REG_PARM_STACK_SPACE): Likewise.
-
- * config/pa/tm-hppa.h (CLEAN_UP_REGISTER_VALUE): Handle 64bit
- PA target correctly.
- (REG_PARM_STACK_SPACE): Define.
- (struct unwind_table_entry): region_start and region_end are
- CORE_ADDRs.
- (typedef opd_data): New.
- (obj_private_data_t): Include pointer to opd_data structure.
-
-1999-08-13 Keith Seitz <keiths@cygnus.com>
-
- * stabsread.c (stabsread_clear_cache): New funciton which clears
- an optimization cache of the reader.
-
- * coffread.c (coff_symfile_finish): Give stabs reader a chance to
- clean up.
-
- * win32-nat.c (handle_load_dll): Don't suppress re-reading symbols
- from a DLL if an objfile for it already exists. (Not that this should
- happen anymore anyway...)
-
-1999-08-13 Keith Seitz <keiths@cygnus.com>
-
- * config/mcore/tm-mcore.h (SAVE_DUMMY_FRAME_TOS): Define for MCore,
- which also requires that the stack pointer be saved for call
- dummies BEFORE arguments get pushed onto it.
-
-1999-08-12 Stan Shebs <shebs@andros.cygnus.com>
-
- From Eli Zaretskii <eliz@is.elta.co.il>:
- * source.c (mod_path) [_WIN32 || __DJGPP__]: Don't remove trailing
- slash from "d:/". Don't overstep the beginning of name.
- [_WIN32 || __MSDOS__]: Convert "d:" to "d:.", otherwise appending
- a slash changes its meaning.
- (openp): Use SLASH_P, not equality with SLASH_CHAR.
- (print_source_lines_base) [CRLF_SOURCE_FILES]: Skip \r only before
- a \n.
- (forward_search_command) [CRLF_SOURCE_FILES]: Remove \r at the end
- of all lines.
- (reverse_search_command) [CRLF_SOURCE_FILES]: Likewise.
-
- * gnu-regex.c (CHAR_CLASS_MAX_LENGTH): Don't use wide characters
- unless HAVE_BTOWC is defined.
-
-Fri Aug 13 10:20:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- From J.T. Conklin <jtc@redback.com>:
- * gdbinit.in: Change the template .gdbinit to match the recent
- fatal error handling change.
-
-1999-08-11 Keith Seitz <keiths@cygnus.com>
-
- * maint.c (maintenance_internal_error): Fix typo in prototype.
-
-Wed Aug 11 15:38:05 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * remote.c (remote_rcmd): Pass an empty command across to the
- target. Check for and handle an ``Enn'' return status.
-
-Tue Aug 10 13:59:45 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * maint.c (_initialize_maint_cmds): Add ``maintenance
- internal-error'' command.
- (maintenance_internal_error): New function.
-
-1999-08-10 James Ingham <jingham@leda.cygnus.com>
-
- * top.c: Remove the disassembly_flavor_hook, use the new set_hook
- instead.
- * defs.h: Ditto.
- * arm-tdep.c (set_disassembly_flavor_sfunc): Ditto.
-
-1999-08-10 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * config/i386/nm-i386sol2.h (FIND_NEW_THREADS): remove, obsolete.
- * config/sparc/nm-sun4sol2.h (FIND_NEW_THREADS): remove, obsolete.
-
-1999-08-10 J.T. Conklin <jtc@redback.com>
-
- * configure.tgt (i[3456]86-*-aout*, i[3456]86-*-coff*,
- i[3456]86-*-elf*): Use embed.mt.
- * config/i386/embed.mt: New file.
-
-1999-08-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * remote.c (remote_async_open_1): Remove casting in call to
- add_file_handler.
- (extended_remote_async_create_inferior): Ditto.
-
- * event-top.c (change_line_handler): Ditto.
- (_initialize_event_loop): Ditto.
-
- * infrun.c (complete_execution): Ditto.
-
- * event-loop.c (add_file_handler): Change proc parameter to be ptr
- to func with void parameter, rather than void*. Coerce second
- paramter in calls to create_file_handler. Replace
- async_handler_func and file_handler_func with handler_func.
-
- * event-loop.h: Get rid of typedefs for file_handler_func and
- async_handler_func, just have one, and call it handler_func.
- Replace async_handler_func and file_handler_func occurrences with
- handler_func.
-
-Tue Aug 10 03:13:03 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-tdep.c: Delete random #if 0 code.
- (is_branch): Handle new branching opcodes from PA2.0
- (inst_saves_gr, inst_saves_fr): Handle additional instructions
- used to save general and floating point registers in the stack.
- (skip_prologue_hard_way): Handle additional instructions to
- save the return pointer in the stack.
- (after_prologue): Fix mis-guided and incorrect code to find
- the end of the prologue using debug symbols.
- (hppa_skip_prologue): Generally clean up comments, lose code
- which does not apply to the PA, etc.
-
-Sun Aug 8 17:53:41 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * MAINTAINERS: Make Andrew Cagney the mn10300 maintainer.
- Transfer responsibility for the PowerPC from Andrew Cagney to
- Elena Zannoni.
-
-Tue Aug 10 13:59:45 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- Based on code from J.T. Conklin <jtc@redback.com>:
- * utils.c (internal_error): Make quit? and coredump? separate
- questions so that the user can dump-core and not quit.
- (internal_error): Cleanup error message.
-
-1999-08-09 Tom Tromey <tromey@cygnus.com>
-
- * kod-cisco.c (cisco_kod_open): Removed incorrect `arg' argument.
-
-Sun Aug 8 12:06:47 1999 Fred Fish <fnf@cygnus.com>
-
- * coffread.c (process_coff_symbol): Remove section_offsets from
- prototype and function definition. Get section_offsets from the
- passed objfile and pass it on to callees the same way.
- (coff_symtab_read): Ditto.
- (coff_symfile_read): Ditto.
- * dbxread.c (read_dbx_dynamic_symtab): Ditto.
- (read_dbx_symtab): Ditto.
- (dbx_symfile_read): Ditto.
- (coffstab_build_psymtabs): Ditto.
- (elfstab_build_psymtabs): Ditto.
- (stabsect_build_psymtabs): Ditto.
- * dstread.c (dst_symfile_read): Ditto.
- * elfread.c (elf_symfile_read): Ditto.
- * jv-class.c (jv_class_symfile_read): Ditto.
- * mipsread.c (mipscoff_symfile_read): Ditto.
- * nlmread.c (nlm_symfile_read): Ditto.
- * os9kread.c (os9k_symfile_read): Ditto.
- * somread.c (som_symfile_read): Ditto.
- * stabsread.h (elfstab_build_psymtabs): Ditto.
- * xcoffread.c (xcoff_initial_scan): Ditto.
-
- * symfile.h (sym_read): Remove section_offsets from prototype.
- * symfile.c (syms_from_objfile): Call sym_read without
- section_offsets.
- (reread_symbols): Ditto.
-
- * elfread.c (elfstab_offset_sections): Use SIZEOF_SECTION_OFFSETS
- to allocate sections offsets array.
- * xcoffread.c (xcoff_symfile_offsets): Ditto.
-
- * partial-stab.h (section_offsets): Get from objfile.
- * dbxread.c (read_dbx_symtab): Fix typo that made -1 casted
- to a CORE_ADDR look like an subtraction expression.
- * objfiles.h: Add some comments.
- * symfile.c: Add some comments.
- * objfiles.c: Add some comments.
- (objfile_relocated): Use ALL_OBJFILE_OSECTIONS to iterate over
- sections.
- (find_pc_sect_sections): Use ALL_OBJSECTIONS to iterate over all
- sections in all objfiles.
- * symfile.c (syms_from_objfile): Use ALL_OBJFILE_OSECTIONS.
-
- * irix5-nat.c (symbol_add_stub): Fix typo that made taking the
- address of lowest_sect with '&' look like a bitwise and op.
- * osfsolib.c (symbol_add_stub): Ditto.
- * solib.c (symbol_add_stub): Ditto.
- * symfile.c (syms_from_objfile): Ditto.
-
- * dwarf2read.c (dwarf2_build_psymtabs_hard): Minor format tweak.
- * symfile.c (syms_from_objfile): Ditto, and fix typo.
- * top.c (init_main): Fix typo in comment (DEFULAT_PROMPT).
- * doc/gdbint.texinfo (find_sym_fns): This replaces symfile_init.
-
-1999-08-08 James Ingham <jingham@leda.cygnus.com>
-
- * remote.c (remote_insert_breakpoint): Fix typo in Z packet support.
- Also move Z packet support OUTSIDE of REMOTE_BREAKPOINT ifdef,
- since this is not set for all targets that support the Z packet.
-
-Fri Aug 6 17:17:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * defs.h (fatal): Delete declaration.
- (internal_error): Declare.
- * utils.c (nomem): Call internal_error instead of fatal.
- (fatal_dump_core): Delete.
- (malloc_botch): Print message direct to stderr.
- (fatal): Delete definition.
- * utils.c (internal_error): Define.
-
- * gdbarch.h, gdbarch.c, hppah-nat.c, ch-exp.c, dsrec.c, sh-tdep.c,
- infptrace.c, f-lang.c, symm-nat.c, top.c, m3-nat.c, v850-tdep.c,
- remote-vx.c, remote-sim.c, remote-mips.c, source.c, infcmd.c,
- findvar.c, remote.c: Replace fatal with call to internal_error.
-
-Sun Aug 8 15:28:33 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * ser-pipe.c (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Move
- definition from here.
- * defs.h: To here.
-
-Sat Aug 7 21:44:59 1999 Fred Fish <fnf@cygnus.com>
-
- * remote.c (remote_insert_breakpoint): Fix typo, missing ';'.
-
-Sun Aug 8 11:26:57 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mips-tdep.c (mips_gdbarch_init): Add break; to the default case.
-
-Fri Aug 6 19:26:03 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * defs.h: Delete #if ANSI_PROTOTYPES code, GDB assumes ISO-C.
- * remote-rdp.c (send_rdp), remote-os9k.c (printf_monitor),
- remote-mips.c: (mips_error), remote-array.c: (printf_monitor,
- debuglogs), complaints.c (complain), monitor.c:
- (monitor_printf_noecho, monitor_printf), language.c (type_error,
- range_error), remote-st.c: (printf_stdebug), remote-sim.c
- (gdb_os_printf_filtered, gdb_os_vprintf_filtered,
- gdb_os_evprintf_filtered, gdb_os_error), serial.c (serial_printf),
- utils.c (warning, error, fatal, fatal_dump_core, (query,
- fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
- printf_filtered, printf_unfiltered, printfi_filtered): Delete
- legacy #ifndef ANSI_PROTOTYPES varargs code.
-
- * defs.h: Don't #include <varargs.h>.
- * remote-rdp.c, remote-os9k.c, remote-mips.c, remote-array.c,
- monitor.c, remote-st.c: Don't include <varargs.h> or <stdarg.h>.
-
-1999-08-06 James Ingham <jingham@leda.cygnus.com>
-
- * configure.in, configure: add the --enable-multi-ice to determine
- whether to configure and build the multi-ice-gdb-server. Note,
- for now this only builds on cygwin, so don't enable it for other
- platforms...
-
-1999-08-06 Tom Tromey <tromey@cygnus.com>
-
- * Makefile.in (SFILES): Added kod.c and kod-cisco.c.
- (COMMON_OBS): Added kod.o and kod-cisco.o.
- (kod-cisco.o): New target.
- (kod.o): New target.
- * kod-cisco.c: New file.
- * kod.c: New file.
-
-1999-08-06 James Ingham <jingham@leda.cygnus.com>
-
- These are some fixups for the Arm, and support for the
- disassembly-flavor for the ARM.
-
- * defs.h: Declare the disassembly_flavor_hook
- * top.c: Define the disassembly_flavor_hook
- * i386-tdep.c: Remove unnecessary declaration of the
- disassembly_flavor_hook.
-
- * config/arm/tm-arm.h: Change definition of
- arm_init_extra_frame_info.
- Add a few more comments.
- * arm-tdep.c (arm_init_extra_frame_info): Listen to and use the
- fromleaf parameter passed into init_extra_frame_info.
- (set_disassembly_flavor_sfunc): New Function.
- (set_disassembly_flavor): New Function.
- (arm_othernames): Use the set_disassembly_flavor.
- (_initialize_arm_tdep): Setup the disassembly flavor commands, and
- initialize the flavor.
- (arm_frameless_function_invocation): Adjust for
- frameless functions that have 1 or 2 instructions that mimic the
- standard APCS form.
- (arm_scan_prologue): Be more careful about scanning the function
- prologue. Don't match things that just have a few of the prologue
- instructions out of order, and don't get thrown by the scheduler
- migrating instructions into the prologue.
-
- Add support for the "Z" and "z" packets to request the stub
- to set a breakpoint.
-
- * remote.c (set_remote_protocol_Z_packet_cmd): New function.
- (show_remote_protocol_Z_packet_cmd): New Function.
- (remote_open_1): Init the Z packet config.
- (remote_async_open_1): Init the Z packet config.
- (remote_insert_breakpoint): Use the "Z" packet if supported.
- (remote_remove_breakpoint): Use the "z" packet if supported.
- (remote_insert_watchpoint): New Function - currently wired to
- nothing.
- (remote_remove_watchpoint): Ditto.
- (remote_insert_hw_breakpoint): Ditto.
- (remote_remove_hw_breakpoint): Ditto.
-
-1999-08-06 Stan Shebs <shebs@andros.cygnus.com>
-
- * infcmd.c: Include parser-defs.h.
- (interrupt_target_command): Declare.
- (stack_dummy_testing): Remove old funky flag.
- (run_stack_dummy): Remove unused reference to old funky flag.
-
-1999-08-06 Tom Tromey <tromey@cygnus.com>
-
- * command.c (do_setshow_command): Call set_hook if not NULL.
- * top.c (set_hook): New hook definition.
- * defs.h (set_hook): Declare.
-
-1999-08-05 Stan Shebs <shebs@andros.cygnus.com>
-
- * infrun.c: Convert code to pure standard C, elim some warnings.
- (stopped_for_shlib_catchpoint): Remove, never used.
-
-1999-08-05 Keith Seitz <keiths@cygnus.com>
-
- * NEWS: Mention new Motorola MCore target.
-
- * sparc-tdep.c (gdb_print_insn_sparc): Print insns of the current
- architecture.
-
-Thu Aug 5 20:41:22 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * configure.in (configdirs): Add check for socketpair.
- * configure, config.in: Re-generate.
-
- From Mon Jul 19 10:46:18 1999 Philippe De Muyter <phdm@macqel.be>:
- * ser-pipe.c (sys/wait.h): Include this file only #if HAVE_SYS_WAIT_H.
- (STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Macros defined if needed.
-
-Thu Aug 5 20:04:17 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * target.c (debug_to_open, debug_to_attach, debug_to_post_attach,
- debug_to_require_attach, debug_to_detach, debug_to_require_detach,
- debug_to_wait, debug_to_post_wait, debug_to_fetch_registers,
- debug_to_store_registers, debug_to_prepare_to_store,
- debug_to_xfer_memory, debug_to_files_info,
- debug_to_insert_breakpoint, debug_to_remove_breakpoint,
- debug_to_terminal_init, debug_to_terminal_inferior,
- debug_to_terminal_ours_for_output, debug_to_terminal_ours,
- debug_to_terminal_info, debug_to_kill, debug_to_load,
- debug_to_lookup_symbol, debug_to_create_inferior,
- debug_to_post_startup_inferior,
- debug_to_acknowledge_created_inferior,
- debug_to_clone_and_follow_inferior,
- debug_to_post_follow_inferior_by_clone,
- debug_to_insert_fork_catchpoint, debug_to_remove_fork_catchpoint,
- debug_to_insert_vfork_catchpoint,
- debug_to_remove_vfork_catchpoint, debug_to_has_forked,
- debug_to_has_vforked, debug_to_can_follow_vfork_prior_to_exec,
- debug_to_post_follow_vfork, debug_to_insert_exec_catchpoint,
- debug_to_remove_exec_catchpoint, debug_to_has_execd,
- debug_to_reported_exec_events_per_exec_call,
- debug_to_has_syscall_event, debug_to_has_exited,
- debug_to_mourn_inferior, debug_to_can_run,
- debug_to_notice_signals, debug_to_thread_alive, debug_to_stop,
- debug_to_query, debug_to_rcmd, debug_to_enable_exception_callback,
- debug_to_get_current_exception_event, debug_to_pid_to_exec_file,
- debug_to_core_file_to_sym_file, debug_to_close): Send trace output
- to ``gdb_stdlog'' instead of ``gdb_stderr''.
-
-Thu Aug 5 16:22:10 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (init_remote_ops): Initialize remote_ops.to_rcmd.
- (init_remote_async_ops): Initialize remote_async_ops.to_query.
- (remote_rcmd): New function.
-
- * monitor.c (monitor_rcmd): Rename monitor_command.
- (init_base_monitor_ops): Initialize monitor_ops.to_rcmd.
- (_initialize_remote_monitors): Move "monitor" command from here.
- * target.c (initialize_targets): To here.
- (monitor_command): New function. Implement "monitor" command.
-
- * target.c (cleanup_target): de_fault to_rcmd.
- (update_current_target): INHERIT to_rcmd.
- (debug_to_rcmd): New function.
- (setup_target_debug): Initialize current_target.to_rcmd.
-
- * target.h (struct target_ops): Add field to_rcmd.
- (target_rcmd): Define.
-
-Thu Aug 5 14:24:07 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c: Replace comment describing remote protocol with
- pointer to official document.
-
-Thu Aug 5 11:59:06 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (remote_protocol_binary_download): New variable.
- Replace ``remote_binary_download'' and ``remote_binary_checked''.
- (set_remote_protocol_binary_download_cmd,
- show_remote_protocol_binary_download_cmd): New functions.
- (remote_open_1, remote_async_open_1, remote_cisco_open):
- Initialize ``remote_protocol_binary_download'' instead of
- ``remote_binary_download''.
- (check_binary_download): Re-write.
- (remote_write_bytes): Ditto.
- (_initialize_remote): Add ``set remote X-packet'' and ``show
- remote X-packet'' commands. Disable old ``set
- remotebinarydownload'' command.
-
-1999-08-04 Keith Seitz <keiths@cygnus.com>
-
- * remote-rdi.c (arm_rdi_close): Close the transport device, too.
-
-Wed Aug 4 10:42:58 1999 Fred Fish <fnf@cygnus.com>
-
- * xcoffread.c (scan_xcoff_symtab): Change main_aux into
- an array of 5 internal_auxent to leave room for bfd to
- write n_numaux entries. Change code to use the first one.
-
-1999-08-02 Stan Shebs <shebs@andros.cygnus.com>
-
- * c-valprint.c (c_val_print): When printing decimal equivalent
- of a char, cast appropriately.
-
-1999-08-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- From Jonathan Larmour <jlarmour@cygnus.co.uk>:
- * main.c (print_gdb_help): Use gdbinit variable to determine file
- name used for --nx help
-
-1999-08-01 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * config/mips/tm-mips.h (BIG_ENDIAN): Don't define here.
-
-1999-08-01 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * stabsread.c (read_range_type): Handle an unsigned range type
- whose length in bytes is any power of two, not just a few
- common ones.
-
- * monitor.c (monitor_expect): When we receive a character that
- isn't part of the string we were expecting, don't just start
- matching again at the beginning of the string --- some shorter
- suffix of the input might be a prefix of the string too.
-
-1999-07-31 Fred Fish <fnf@cygnus.com>
-
- * symfile.c (symbol_file_command): Fix typo that made -1 casted
- to a CORE_ADDR look like an subtraction expression.
- (add_symbol_file_command): Ditto.
-
-1999-07-30 Jim Blandy <jimb@cris.red-bean.com>
-
- * hppa-tdep.c (pa_print_registers): Frob register output some more.
-
-1999-07-29 Jim Blandy <jimb@cris.red-bean.com>
-
- * config/pa/nm-hppah.h (PTRACE_ARG3_TYPE): After more
- consideration, make this a CORE_ADDR, like WDB did.
-
- Rather than casting every single use of really_free_pendings to
- make_cleanup_func, why not actually make it have that type? Golly!
- * buildsym.c (really_free_pendings): Change argument type to PTR.
- buildsym.h (really_free_pendings): Fix declaration.
- * dbxread.c (dbx_symfile_read, dbx_psymtab_to_symtab_1),
- dwarf2read.c (psymtab_to_symtab_1), dwarfread
- (psymtab_to_symtab_1), hp-psymtab-read.c (hpread_build_psymtabs),
- os9kread.c (os9k_symfile_read, os9k_psymtab_to_symtab_1),
- xcoffread.c (xcoff_psymtab_to_symtab_1, xcoff_initial_scan):
- Remove casts.
-
- Pass a CORE_ADDR safely through catch_errors.
- * hppa-tdep.c (args_for_find_stub): New member, return_val.
- (cover_find_stub_with_shl_get): Change argument and return type to
- match catch_errors. Save return value of find_stub_with_shl_get
- in *args.
- (initialize_hp_cxx_exception_support): Collect value of
- eh_notify_callback_addr from args.
-
- Get rid of some noise. It would be nice to get helpful warnings
- from the compiler about lossy conversions.
- * hppa-tdep.c (eh_notify_hook_addr, eh_notify_callback_addr,
- eh_break_addr, eh_catch_catch_addr, eh_catch_throw_addr,
- break_callback_sal): Initialize these to zero, not NULL, to shush
- warnings.
- * infttrace.c (thread_fake_step): Compare signal to
- TARGET_SIGNAL_0, not NULL, to avoid warnings.
- (_initialize_infttrace): Add sanity check.
-
- * config/pa/nm-hppah.h (PTRACE_ARG3_TYPE): Define this to be
- long, so we can pass arguments properly to ptrace.
-
- * hppah-nat.c (child_xfer_memory): Correctly compute mask to round
- address to an int boundary.
-
-1999-07-29 Jim Blandy <jimb@savonarola.red-bean.com>
-
- Change from Ian Lance Taylor <ian@zembu.com>. The
- i386_linux_sigtramp* functions should be moved to
- i386-linux-tdep.c, when that file is introduced.
-
- * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Define.
- (LINUX_SIGCONTEXT_PC_OFFSET): Define.
- (LINUX_SIGCONTEXT_SP_OFFSET): Define.
- (SIGCONTEXT_PC_OFFSET): Don't define.
- (I386_LINUX_SIGTRAMP): Define.
- (IN_SIGTRAMP): Define.
- (i386_linux_sigtramp): Declare.
- (sigtramp_saved_pc): Define.
- (i386_linux_sigtramp_saved_pc): Declare.
- (FRAMELESS_SIGNAL): Define.
- (FRAME_CHAIN, FRAME_SAVED_PC): Define after #undef.
- * i386-tdep.c (i386_linux_sigtramp_start): New static function if
- I386_LINUX_SIGTRAMP.
- (i386_linux_sigtramp): New function if I386_LINUX_SIGTRAMP.
- (i386_linux_sigtramp_saved_pc): Likewise.
- (i386_linux_sigtramp_saved_sp): Likewise.
-
-1999-07-28 Jim Blandy <jimb@savonarola.red-bean.com>
-
- * infrun.c (handle_inferior_event): Don't try to use the code for
- stepping over a function call to also handle stepping out of a
- sigtramp on HP-UX. That ends up trashing step-resume breakpoints.
- This change reverts some of David Taylor's change of 31 Dec 1998.
- The HP-UX maintainer needs to submit a new change for whatever
- problem the original change was trying to fix.
-
-1999-07-28 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-top.c (command_line_handler): Don't treat an empty line
- from readline the same way as a multiline command. This avoids
- missing detecting when the user presses just 'enter'.
-
-1999-07-28 Jim Blandy <jimb@savonarola.red-bean.com>
-
- Provide more sanity checking:
- * infrun.c (handle_inferior_event): Before assigning a new
- breakpoint to step_resume_breakpoint, make sure it's not already
- pointing at one; if it is, that's a bug.
- (check_for_old_step_resume_breakpoint): New function.
-
-1999-07-28 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- From Eli Zaretskii <eliz@is.elta.co.il>:
- * top.c (gdb_init) [__MSDOS__]: Arrange for GDB to return to the
- original directory before exiting.
- (cd_command) [_WIN32 || __MSDOS__]: Canonicalize the new directory
- name explicitly. Handle "d:/" names correctly.
- (init_history) [__MSDOS__]: Use _gdb_history as the default GDB
- history file name.
-
-Mon Jul 26 17:13:39 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (enum packet_support, enum packet_detect, struct
- packet_config): Define.
- (set_packet_config_cmd, show_packet_config_cmd,
- add_packet_config_cmd, init_packet_config): New functions.
- Generic support for optional packets.
- (remote_protocol_P): Replace stub_supports_P.
- (set_remote_protocol_P_packet_cmd, show_remote_protocol_P_packet_cmd):
- New functions.
- (_initialize_remote): Add ``set remote-protocol-P-packet'' command.
- (remote_open_1, remote_async_open_1, remote_cisco_open):
- Initialize ``remote_protocol_P''.
- (remote_store_registers): Re-write ``P'' probe logic.
- (store_register_using_P): New function.
-
- From Ian Lance Taylor <ian@airs.com>:
- (remote_prepare_to_store): Only read registers when ``P'' packet
- is in state unsupported or support-unknown.
-
-1999-07-24 Fred Fish <fnf@cygnus.com>
-
- * symfile.c (default_symfile_offsets): Clear section_offsets
- before filling it in.
-
-1999-07-16 Keith Seitz <keiths@cygnus.com>
-
- * remote.c (_initialize_remote): "remotebreak" should be a var_boolean.
-
-1999-07-15 Jim Blandy <jimb@cris.red-bean.com>
-
- Make the output from "info registers" fit withinin 80 columns.
- * hppa-tdep.c (pa_print_registers): Make it easy to change row and
- column counts. Switch to three columns, instead of four, and
- adjust spacing.
-
- First cut at supporting HPPA2.0 in "wide" (64-bit) mode.
- * configure.tgt: Add hppa2.0w target.
- * config/pa/hppa64.mt, config/pa/tm-hppa64.h: New files.
- * hppa-tdep.c (hppa_fix_call_dummy): Dyke out code to tweak the
- call dummy, if target is PA2.0w. This is temporary, until I get
- function calls working.
- * hppah-nat.c (fetch_register): Rewritten to handle both narrow
- and wide register requests.
- (HPPAH_OFFSETOF): New macro.
-
- * gdbtypes.c (is_integral_type): New function.
- * gdbtypes.h: Prototype for above.
-
-1999-07-15 J.T. Conklin <jtc@redback.com>
-
- * configure.tgt (i[3456]86-*-vxworks*): New target.
- * config/i386/vxworks.mt: New file, x86 VxWorks target
- * config/i386/tm-vxworks.h: New file.
-
- * configure.tgt (powerpc-*-vxworks*): New target.
- * config/powerpc/vxworks.mt: New file, PowerPC VxWorks target
- * config/powerpc/tm-vxworks.h: New file.
-
- * NEWS: Mention the new configs.
-
-1999-07-15 Fernando Nasser <fnasser@cygnus.com>
-
- * target.c (target_preopen): Prevent query when not from_tty.
- * infcmd.c (run_command): Prevent query when not from_tty.
-
-1999-07-15 Fernando Nasser <fnasser@cygnus.com>
-
- * event-loop.c: Fix typo in comment.
-
-Wed Jul 14 17:29:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * ser-pipe.c (struct pipe_state): Define.
- (pipe_close): Retain the PID of the sub-process using ``struct
- pipe_state''. Delete #ifdef code that used popen().
- (pipe_close): Kill of the sub-process as part of the cleanup.
-
- * serial.h (struct _serial_t): Add field ``state''.
-
-1999-07-13 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-top.c (display_gdb_prompt): Don't display the prompt if we
- are in the middle of an execution command. Also trick readline so
- it doesn't try to display the prompt.
- (command_line_handler): Get rid of change_prompt, unused variable.
- Use {push, pop}_prompt mechanism in case of multiline commands.
-
- * infrun.c (complete_execution): Set target_executing to 0 as
- first thing, so that display_gdb_prompt does the right thing.
-
-Tue Jul 13 20:29:46 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * parse.c (build_parse): Fix conditional increment of num_std_regs
- for SP_REGNUM. Was conditional on FP_REGNUM.
-
-Tue Jul 13 16:44:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c: Revert 1999-07-07 Stan Shebs
- <shebs@andros.cygnus.com> indentation change. Don't let indent
- mess with these files.
-
-Mon Jul 12 11:15:09 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/mips/tm-mips.h (REGISTER_CONVERT_TO_RAW,
- REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERTIBLE): Define.
- (REGISTER_RAW_SIZE): Re-define as mips_register_convert_to_raw.
- * mips-tdep.c (mips_register_convert_to_raw,
- mips_register_convert_to_virtual, ): New functions.
- (mips_register_raw_size, mips_register_convertible): New
- functions. Handle bug introduced by ``Wed Apr 1 23:13:23 1998
- Andrew Cagney <cagney@b1.cygnus.com>'' where remote mips64 target
- transfers SR as 64 bits yet GDB expected only 32 bits.
- (mips64_transfers_32bit_regs): New static variable.
- (_initialize_mips_tdep): Add obscure command ``set
- remote-mips64-transfers-32bit-regs'' that provides backward
- compatibility.
- (do_gp_register_row): Extract register values from raw buffer.
-
- * NEWS: Document protocol change.
-
-1999-07-12 Keith Seitz <keiths@cygnus.com>
-
- * rdi-share/unixcomm.c (Unix_ResetSerial): Remove CYGWIN32
- conditional. It's no longer needed.
- (SERPORT1, SERPORT2): Linux serial ports are "/dev/ttyX", not
- "/dev/cuaX" (X=0,1,2,3,...).
-
-Mon Jul 12 02:02:00 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * defs.h, utils.c (fputstrn_filtered, fputstrn_unfiltered,
- fputstrnn_unfiltered): New functions.
- (gdb_printchar): Delete.
-
- * remote.c (print_packet): Replace gdb_printchar with
- fputstrn_filtered.
- (getpkt): Use fputstrn_unfiltered to dump packet received.
- (putpkt_binary): Use fputstrnn_unfiltered to dump packet sent.
-
-1999-07-09 Keith Seitz <keiths@cygnus.com>
-
- * blockframe.c (blockvector_for_pc_sect): When looking for a block,
- we want the one whose end is greater than our PC, not greater or equal.
-
-1999-07-08 Stan Shebs <shebs@andros.cygnus.com>
-
- * sparcl-tdep.c (init_sparclite_ops): Fix doc strings, remove
- useless inits.
- (sparclite_ops): Remove redundant decl.
-
-Thu Jul 8 16:48:40 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * ser-pipe.c (pipe_open): Bi-directional popen found on both
- NetBSD and OpenBSD.
- * ser-pipe.c: New file. Implement popen() style serial interface.
- * NEWS: Mention.
- * Makefile.in (ALLDEPFILES): Add ser-pipe.c.
- (ser-pipe.o): Add new target. Specify dependencies.
- (SER_HARDWIRE): Add ser-pipe.o.
- * serial.c (serial_open): Recognize a serial pipe ``|''.
-
-1999-07-07 Stan Shebs <shebs@andros.cygnus.com>
-
- * All C files except *-stub.c and *-share/*: Indent to GNU
- standard, using indent 1.9.1.
- * defs.h: Make indent ignore this file, macros confuse it.
-
- * gnu-regex.c, gnu-regex.h: Don't let indent mess with these.
-
-Wed Jul 7 13:06:24 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-mips.c (fputs_readable): Rename puts_readable, add struct
- gdb_file argument.
- (fputc_readable): Rename putc_readable, add struct gdb_file
- argument.
-
- * remote-mips.c (mips_expect_timeout, mips_receive_header,
- mips_send_packet, mips_receive_packet), remote-rdp.c (put_byte,
- get_byte, put_word, rdp_init, rdp_init), remote-sds.c
- (sds_interrupt, sds_wait, readchar, putmessage, read_frame,
- getmessage), remote-udi.c (udi_store_registers, fetch_register):
- (store_register), xmodem.c (readchar), utils.c (puts_debug),
- gnu-nat.h (debug), parse.c (parse_exp_1): Cleanup - send debug/log
- messages to gdb_stdlog.
-
-1999-07-06 Stan Shebs <shebs@andros.cygnus.com>
-
- * exec.c: Remove long-#ifed-out section of code that confuses
- indent.
- * gdbtypes.c (add_mangled_type): Add some braces to indicate
- grouping better.
- * gnu-nat.c: Remove literal newlines embedded in strings,
- causes indent to weird out.
- * language.c (binop_result_type): Remove extra paren.
- * lynx-nat.c: Add a missing paren to fetch_core_registers decl.
- * nec4102rom.c (vr4102_insert_step): Fix typos.
- (_initialize_vr4102_rom): Remove literal newline in string.
- * config/a29k/tm-a29k.h: Suppress formatting of pictures.
- * config/m68k/xm-3b1.h: Remove excess #endif.
-
- Declare Pyramid configuration obsolete.
- * configure.host, configure.tgt: Comment out Pyramid configs.
- * Makefile.in: Comment out Pyramid-related actions.
- * pyr-xdep.c, pyr-tdep.c, config/pyr/*: Comment out.
- * NEWS: Mention obsolete status.
-
-1999-07-06 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * remote.c: Include <sys/time.h> to pick up FD_SET et al defns on
- some old Linux distributions.
- * remote-os9k.c, remote-st.c, ser-tcp.c, ser-unix.c,
- sparcl-tdep.c, remote.c: Back out inclusion of <sys/select.h>.
- It isn't necessary after all.
-
-1999-07-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * infcmd.c (strip_bg_char): Remove assignment from 'if' condition.
-
-1999-07-05 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * remote.c: Include <sys/select.h> if it exists in order to pick up
- FD_SET et al defns.
- * remote-os9k.c: Same.
- * remote-st.c: Same.
- * ser-tcp.c: Same.
- * ser-unix.c: Same.
- * sparcl-tdep.c: Same.
-
-Fri Jul 2 19:38:43 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * top.c (target_output_hook): Delete definition.
- * defs.h (target_output_hook): Delete declaration.
-
- * remote.c (remote_console_output): Delete call to
- target_output_hook(). Send target output to gdb_stdtarg using an
- unfiltered write. Make more robust.
-
- * remote-sim.c (gdb_os_write_stdout, gdb_os_write_stderr):
- Ditto. For moment, do not try to separate target stdout and stderr
- streams.
-
- * defs.h (gdb_stdtarg): New global. Output from target and
- simulators.
-
-1999-07-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * top.c (return_to_top_level): Do all the exec_cleanups too.
-
- * event-top.c (command_handler): Set up for a continuation, if we
- are in the middle of running an execution command which will
- finish later on. Do cleanups, an display of time/space only if not
- running with an async target or not running an execution command.
- (command_line_handler_continuation): New function. Continuation
- for command_line_handler.
-
- * utils.c (exec_cleanup_chain): New cleanup chain to be used in
- async mode for the execution commands.
- (make_exec_cleanup): New function. Add a cleanup to the
- exec_cleanup_chain.
- (do_exec_cleanups): New Function. Do cleanups on the
- exec_cleanup_chain.
- (add_continuation): New function. Add a new continuation to the
- cmd_continuation list.
- (do_all_continuations): New function. Do all the continuations on
- the cmd_continuation list.
-
- * top.h (ALL_CLEANUPS): Move from here to defs.h.
-
- * defs.h (struct continuation_arg): New structure. Arg to pass to
- the call to a command continuation.
- (struct continuation): New structure. Continuation for an
- execution command.
- (ALL_CLEANUPS): Move here from top.h.
-
- * remote.c (remote_async_open_1): Set things up for telling the
- target we are running the extended protocol, only after the target
- has stopped.
- (set_extended_protocol): New function. Tell the target we are
- using the extended protocol.
- (remote_async_resume): Set things up for sync execution only if
- this is the first time we are called.
-
- * breakpoint.c (until_break_command_continuation): New function.
- Stuff to be done after the target stops during the 'until'
- command.
- (until_break_command): Set things up for completing the 'until'
- command later on. Do the final cleanups only if not running
- asynchronously or async execution is not supported by the target.
-
- * infcmd.c (until_command): Recognize '&' at end of command and
- handle it properly.
- (finish_command_continuation): New function. Do whatever is needed
- after the target has stopped.
- (finish_command): Recognize '&' at end of command and handle it
- properly. Don't do stuff needed after target has stopped if
- running asynchronously and target has async. Use exec_cleanup_chain
- if running asynchronously and target is asynchronous.
-
- * infrun.c (cmd_continuation): New gloabl variable. Used to
- coplete execution commands in async mode, after the target has
- stoped.
- (fetch_inferior_event): Use exec_cleanup_chain, instead of
- cleanup_chain. Do all the exec cleanups at the end. Do all the
- continuations at the end. Call complete_execution from here,
- instead of normal_stop.
- (complete_execution): Cleanup the signals handlers for SIGINT
- before displaying the prompt.
- (start_remote): Set target_executing to 1.
- (normal_stop): Don't call complete_execution from here.
-
-Thu Jul 1 19:14:30 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * blockframe.c (struct dummy_frame): Add member ``top''.
- (generic_push_dummy_frame): Initialize top to sp.
- (generic_save_dummy_frame_tos): New function. Initialize top.
- (generic_find_dummy_frame): Check for the top of the frame.
-
- * blockframe.c (generic_push_dummy_frame): Free the dummy_frame
- registers.
-
- * config/mn10300/tm-mn10300.h (SAVE_DUMMY_FRAME_TOS): Define.
- (TARGET_READ_FP): Return the SP as a best guess.
-
-Wed Jun 30 15:45:48 1999 Jeffrey A Law (law@cygnus.com)
-
- * configure.host (hppa*-*-hpux11*): Accept any version of hpux11
- instead of hpux11.0*.
-
-1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * source.c (directory_command): Add missing test for from_tty.
-
-1999-06-29 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * remote.c: Include event-loop.h.
- (remote_async_ops, extended_async_remote_ops): Define new target
- vector structures for asynchronous debugging.
- (remote_async_open): New function. Asynchronous version of
- remote_open.
- (extended_remote_async_open): New function. Asynchronous version
- of extended_remote_open.
- (remote_async_open_1): New function. Async version of
- remote_open_1.
- (remote_async_detach): New function. Async version of
- remote_detach.
- (remote_async_resume): New function. Async version of
- remote_resume.
- (initialize_sigint_signal_handler, handle_remote_sigint,
- handle_remote_sigint_twice, async_remote_interrupt,
- async_remote_interrupt_twice, cleanup_sigint_signal_handler): New
- functions. Used for handling ^C while target is running.
- (remote_async_wait): New function. Async version of remote_wait.
- (remote_async_kill): New function. Async version of remote_kill.
- (extended_remote_async_create_inferior): New function. Async
- version of extended_remote_create_inferior.
- (init_remote_async_ops): New function. Initialize target vector
- for target async.
- (init_extended_async_remote_ops): New function. Initialize target
- vector for target extended-async.
- (_initialize_remote): Initialize remote_async_ops and
- extended_async_remote_ops.
-
- * infrun.c: Include "event-loop.h".
- (sync_execution): new global variable.
- (proceed): Invoke wait_for_inferior and normal_stop only if not
- running in async mode or if target doesn't support async
- execution.
- (start_remote): Don't call wait_for_inferior and normal_stop if
- not running in async mode or if target not async. If running async
- and target is async, start the target in simulated synchronous
- mode.
- (async_ecss, async_ecs): New global vars, for inferior state.
- (fetch_inferior_event): New function. Async version of
- wait_for_inferior.
- (complete_execution): New function. Reset of gdb prompt and stdin,
- after inferior execution has completed.
- (normal_stop): Call complete_execution at end of asynchronous
- execution.
-
- * infcmd.c (strip_bg_char): New function to detect the background
- execution char '&'.
- (run_command): Modify to support background and foreground
- execution in async mode.
- (continue_command): Ditto.
- (step_1): Ditto.
- (jump_command): Ditto.
- (interrupt_target_command): New function. Interrupt the
- target execution.
- (_initialize_infcmd): Add new command 'interrupt'.
-
- * top.c (target_executing): New global variable.
- (execute_command): Reject commands that cannot be executed while
- the target is running asynchronously.
-
- * event-top.c (push_prompt): Make non static.
- (pop_prompt): Make non static. If the current prompt is empty,
- don't try to copy it over the previous one.
- (handle_sigint): Make non static.
- (command_handler): Do the cleanups only when not executing with an
- asynchronous target.
-
- * event-loop.c (delete_async_signal_handler): Pass a pointer to a
- pointer to a signal handler, so that is can be freed at the end.
-
- * target.c (update_current_target): Inherit to_has_async_exec.
-
- * inferior.h: Add global variables target_executing, and
- sync_execution. Export function fetch_inferior_event.
-
- * event-loop.h: Add push_prompt, pop_prompt, handle_sigint to the
- exported functions. Update prototype for delete_signal_handler.
-
- * target.h (struct target_ops): New target op: to_has_async_exec.
- (target_has_async): New macro.
-
- * Makefile.in (infrun.o): Add dependency on event-loop.h.
- (remote.o): Ditto.
-
-1999-06-28 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * solib.c (clear_solib): Don't disable breakpoints if we're
- running an a.out executable (Solaris's SunOS emulation).
-
-1999-06-25 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * main.c (main): Remove intialization of command_loop_hook, it
- is now done in _initialize_event_loop().
- * event-loop.c (gdb_do_one_event): Make static.
- (start_event_loop): New function. Just start the event loop.
- * event-top.c (cli_command_loop): New name for start_event_loop().
- (gdb_readline2): Make non static.
- (_initialize_event_loop): Set command_loop_hook to cli_command_loop.
- * event-loop.h: Adjust exported functions accordingly.
-
- * top.c (init_main): Move setting of async_command_editing_p from
- here.
- * event-top.c (_initialize_event_loop): To here.
- (change_line_handler): Revert previous change. Add comment.
- (_initialize_event_loop): Revert previous change.
- (cli_command_loop): New name for start_event_loop().
- (start_event_loop): New function. This just starts up the event loop.
- (gdb_readline2): Make non static.
- (_initialize_event_loop): Set command_loop_hook to cli_command_loop.
-
-1999-06-25 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-top.c (change_line_handler): Get rid of the global
- variable input_fd, use `fileno (instream)' instead.
- (_initialize_event_loop): Ditto
-
- * event-loop.c (add_file_handler): New function. Wrapper for
- create_file_handler.
- (create_file_handler): Make static.
- * event-top.c (_initialize_event_loop): Call add_file_handler,
- instead of create_file_handler.
- (change_line_handler): Ditto.
- Remove poll.h include.
- * event-loop.h: Export add_file_handler instead of
- create_file_handler.
-
-1999-06-24 Stan Shebs <shebs@andros.cygnus.com>
-
- Declare Altos configuration obsolete.
- * configure.host, configure.tgt: Comment out Altos config.
- * Makefile.in: Comment out Altos-related actions.
- * altos-xdep.c, config/m68k/altos.mh, altos.mt, tm-altos.h,
- xm-altos.h: Comment out.
- * NEWS: Mention obsolete status.
-
-1999-06-24 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * Makefile.in: Add MAKEHTML and MAKEHTMLFLAGS; pass them down;
- recognize html and install-html targets.
- * gdbserver/Makefile.in: Add empty html and install-html targets.
- * nlm/Makefile.in: Ditto.
- * rdi-share/Makefile.in: Ditto.
-
-1999-06-24 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.c (agent_command): Remove vestigial call to ax_reqs.
-
-1999-06-24 James Ingham <jingham@leda.cygnus.com>
-
- * arm-tdep.c (arm_othernames): Change both gdb's register display
- AND the opcode disassembly register naming if the othernames
- command. Fixes the gdb part of CR 101177.
-
-1999-06-23 Stan Shebs <shebs@andros.cygnus.com>
-
- Declare Convex configuration obsolete.
- * configure.host, configure.tgt: Comment out Convex configs.
- * Makefile.in: Comment out Convex-related actions.
- * convex-xdep.c, convex-tdep.c, config/convex/*: Comment out.
- * NEWS: Mention obsolete status.
-
-1999-06-23 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * main.c: Turn on async by default by setting async_p to 1.
-
-Wed Jun 23 15:44:39 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- From Jimmy Guo <guo@cup.hp.com>:
- * frame.h (enum lval_type): Delcare when an __STDC__ compiler.
- Reverts Mon Aug 11 16:08:52 1997 Fred Fish <fnf@cygnus.com>
- change.
- * utils.c (gdb_file_rewind, gdb_file_put): Fix. A void function
- does not return a result.
-
-Wed Jun 23 15:30:46 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (set_thread, remote_get_threadinfo,
- remote_threads_info, remote_current_thread, remote_get_threadlist,
- extended_remote_restart, get_offsets, remote_open_1,
- remote_detach, remote_resume, remote_wait, remote_fetch_registers,
- remote_store_registers, check_binary_download, remote_write_bytes,
- remote_read_bytes, remote_search, putpkt_binary, putpkt_binary,
- read_frame, compare_sections_command, remote_query,
- packet_command, remote_info_process): Use alloca to create space
- for arrays of size PBUFSIZ.
-
-1999-06-22 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * top.c: Update copyright years to include 1999.
-
-1999-06-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * top.c: Move include of event-loop.h, to avoid redefinition of
- NFDBITS.
-
- * event-loop.c (create_file_handler): Do not do a realloc of the
- pollfd structure of the notifier, unless there is already one.
- Include <sys/types.h> for platforms that have no poll.
-
- * event-top.c: Fix prototype for _initialize_event_loop.
- (_initialize_event_loop): Do something only if running in async
- mode.
-
-1999-06-17 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Make the '/c' print format use a true character type. This is
- more appropriate than builtin_type_char for languages other than
- C, and C tolerates it.
- * gdbtypes.c (builtin_type_true_char): New variable.
- (build_gdbtypes): Initialize it.
- * gdbtypes.h (builtin_type_true_char): New declaration.
- * printcmd.c (print_scalar_formatted): When the format is 'c',
- extract the value as a builtin_type_true_char.
-
- * jv-exp.y (yylex): Say character literals are java_char_type, not
- builtin_type_char. Java treats the latter like `byte'.
-
-1999-06-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * Makefile.in (top_h): Define.
- (event-loop.o): Add dependencies on top.h and defs.h.
- (event-top.o): Add dependency on terminal.h.
-
- * event-loop.c: Get rid of #include <readline.h>.
-
- * event-loop.h: Get rid of nested #include's.
- * event-loop.c: Rearrange includes to accomodate change in
- event-loop.h. Include poll.h, not sys/poll.h.
- * event-top.c: Ditto.
- * main.c: Ditto.
-
-1999-06-16 David Taylor <taylor@louisiana.cygnus.com>
-
- * alpha-tdep.c (alpha_pop_frame): if frame->proc_desc
- is NULL, call find_proc_desc so we know how to restore
- the registers.
-
-1999-06-15 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * event-top.c (start_event_loop): call get_prompt.
- (display_gdb_prompt): call get_prompt.
- (async_stop_sig): call get_prompt.
-
-1999-06-15 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-loop.c (delete_file_handler): When positioning prev_ptr,
- keep looping while the one after is not equal to file_ptr, instead
- of equal.
-
-1999-06-14 Stan Shebs <shebs@andros.cygnus.com>
-
- * MAINTAINERS: Add Jimmy Guo and Jim Blandy as HP testsuite and
- SVR4 solib maintainers, respectively.
-
-1999-06-14 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- Add parameters to the gdb prompt.
- * top.c (prompt): Rename to gdb_prompt_string for clarity.
- (command_line_input): rename "prrompt" to prompt_arg for clarity.
- (gdb_readline): rename "prrompt" to prompt_arg for clarity.
- (read_command_lines): rename "prompt" to prompt_arg for clarity.
- (stop_sig): call get_prompt instead of reading prompt string directly.
- (command_loop): ditto.
- (gdb_prompt_escape): New variable. Esc char for prompt parameters.
- (get_prompt_1): New function, workhorse for get_prompt.
- (get_prompt): Completely rewrite. Add functionality for a
- parameterized prompt, ie. the displayed prompt can change according
- to the value of one or more expressions given as parameters in the
- prompt string.
- (init_main): use renamed variable gdb_prompt_string. Add new
- command "set prompt-escape-char" to set gdb_prompt_escape.
-
-Sun Jun 13 10:44:13 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * defs.h (gdb_stdlog), main.c: Declare.
- * main.c (main): Initialize.
- * gdbarch.c: Write trace messages to the log file.
- * remote.c: Update any debug/log prints.
-
-1999-06-11 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (remote_wait): Clean up new thread handling.
- (record_currthread): Announce new threads.
-
-1999-06-11 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * partial-stab.h (case N_LSYM, 'T' descriptor): Don't create
- partial symbol table entries for nameless enums, even if the type
- name is " ". (We still pick up the enum elements, though.)
-
- * partial-stab.h: Remove #if 0'd sections, dating back to 1992,
- which set a variable which exists nowhere else in the source.
- Please examine your test suite output carefully, and report any
- problems to me.
-
-1999-06-11 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-top.c (setup_event_loop): Change name to start_event_loop.
- Move the intialization of event-loop variables to
- _initialize_event_loop.
- (_initialize_event_loop): New function. Called at init time, to
- set up important event-loop variables.
-
- * event-loop.h: setup_event_loop is now start_event_loop.
- * main.c (main): Ditto.
-
-Fri Jun 11 18:34:33 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * defs.h (gdb_file_rewind_ftype, gdb_file_rewind,
- set_gdb_file_rewind, gdb_file_put_ftype, gdb_file_put,
- set_gdb_file_put): Declare.
-
- * utils.c (gdb_file_new): Initialize ``rewind'' and ``put''.
- (struct gdb_file): Add to_rewind and to_put.
- (null_file_put, null_file_rewind, gdb_file_put, gdb_file_rewind,
- set_gdb_file_put, set_gdb_file_rewind): New functions.
- (tui_file_rewind, tui_file_put): New functions.
- (tui_file_new): Add rewind and put.
-
-Fri Jun 11 15:10:32 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (d10v_push_arguments): Fix order of arguments passed
- to store_address.
-
-Fri Jun 11 10:31:29 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (tty_input): Change array to pointer.
- (_initialize_remote): Call build_remote_gdbarch_data.
- (build_remote_gdbarch_data): New function. Allocate space for
- tty_input.
- (readsocket, readtty): Delete extern declaration of tty_input.
-
-1999-06-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-top.c (gdb_readline2): Call the command handling function
- via the input_handler pointer.
- (change_line_handler): When turning off editing, set input_handler
- as well.
-
- * utils.c (prompt_for_continue): If running asynchronously, call
- async_request_quit, instead of request_quit.
-
- * tracepoint.c (read_actions): If running asynchronously, set the
- signal handler for STOP_SIGNAL to handle_stop_sig.
-
- * top.h: (source_line_number, source_file_name, source_error,
- source_pre_error, history_expansion_p, server_command): export for
- use of event-top.c.
-
- * event-top.c: Include top.h and terminal.h.
- (instream): Remove extern declaration.
- (handle_sigint, handle_sigquit, handle_sighup, handle_sigfpe,
- handle_sigwinch, async_do_nothing, async_disconnect,
- async_float_handler, async_stop_sig): Make static.
- (async_request_quit, async_do_nothing, async_disconnect,
- async_float_handler, async_stop_sig): Add gdb_glient_data
- argument.
- (handle_stop_sig): New function.
- (sigtstp_token): New variable.
- (sigint_token, sigquit_token, sigfpe_token, sigwinch_token):
- Change their type tp PTR.
- (mark_async_signal_handler_wrapper): New function.
- (setup_event_loop): Initialize all the variables used by readline
- only if not already done while reading the .gdbinit file. Display
- the initial gdb prompt, if .gdbinit took care of setting things up
- for readline.
- (change_line_handler): When turning on the use of readline,
- initialize input_handler as well.
- (command_line_handler): Set up the signal handler for STOP_SIGNAL
- to be handle_stop_sig.
- (async_init_signals): Remove coercion of signal handlers in calls
- to create_async_signal_handler. Initialize token for stop signal.
- (handle_sigint): Call async_request_quit using one argument.
- (handle_sigint, handle_sigquit, handle_sighup, handle_sigfpe,
- handle_sigwinch): Call mark_async_signal_handler_wrapper instead
- of mark_async_signal_handler.
-
- * event-loop.h: Add extern declarations for handle_stop_sig,
- async_command_editing_p, async_annotation_suffix,
- new_async_prompt, the_prompts.
-
- * top.c (command_line_input): Set the signal handler to be
- handle_stop_sig, in case gdb is running asynchronously.
- (get_prompt): Return the top of the prompt stack if running
- asynchronously.
- (set_prompt): Set the top of the prompt stack if running
- asynchronously.
- (init_main): Move ``extern'' vars from here to event-loop.h.
-
-1999-06-10 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * values.c (value_from_string): new function. Make a value_ptr
- from a string, with storage in local GDB memory (not in inferior).
- * value.h (value_from_string): add prototype.
- * remote.c (remote_cisco_ops): New remote target, "target cisco".
- (init_remote_cisco_ops): New function, initialize new target.
- (remote_cisco_mourn, remote_cisco_wait, remote_cisco_open,
- remote_cisco_close): New functions, implement new target cisco.
- (minitelnet, readtty, readsocket) New functions, implement the
- I/O pass-through mode for target cisco.
- (remote_wait): Detect special enhanced version of the 'S' packet
- for target cisco.
- (remote_cisco_expand): Perform Cisco variant of RLL decoding.
-
-1999-06-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-loop.c (gdb_wait_for_event): Initialize num_found to 0.
-
- * top.c (print_prompt): Delete this function.
-
- From: Andrew Cagney <cagney@b1.cygnus.com>
-
- * event-top.c (async_hook): Delete extern declaration.
-
- * defs.h: Replace ``async_hook'' with ``async_p''.
- * top.c (gdb_init, init_main, init_main, init_main, init_main):
- Replace ``async_hook'' with ``async_p''.
-
- * main.c: Rename ``async'' to ``async_p''.
- (main): Add --noasync option.
- (main): Hook in the asynchronous event-loop based CLI using
- command_loop_hook instead of async_hook. Delete call to
- async_hook().
-
-Thu Jun 10 21:14:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mn10300-tdep.c (mn10300_store_return_value,
- mn10300_extract_struct_value_address,
- mn10300_extract_return_value), config/mn10300/tm-mn10300.h: New
- functions.
- * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS,
- STORE_RETURN_VALUE, EXTRACT_RETURN_VALUE): Update.
- (TARGET_MN10300): Delete macro. Not used.
-
-Thu Jun 10 20:04:02 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mn10300-tdep.c (mn10300_register_names): Make static.
- (STORE_STRUCT_RETURN): Do not modify SP.
-
- * config/mn10300/tm-mn10300.h(mn10300_register_name),
- mn10300-tdep.c : New function.
- * config/mn10300/tm-mn10300.h (REGISTER_NAME): Update.
- * config/mn10300/tm-mn10300.h (mn10300_saved_pc_after_call),
- mn10300-tdep.c: New function.
- * config/mn10300/tm-mn10300.h (SAVED_PC_AFTER_CALL): Update.
-
-1999-06-10 Keith Seitz <keiths@cygnus.com>
-
- * mcore-rom.c (picobug_dumpregs): Return a value. Any value, it
- doesn't matter.
- * mcore-tdep.c (mcore_analyze_prologue): Set NO_MORE_FRAMES
- if the start of the function is the entry point.
- (mcore_analyze_prologue): rotli takes an immediate, not an
- offset immediate.
- (mcore_push_arguments): Fix compiler warning.
-
-1999-06-09 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * rs6000-tdep.c (skip_prologue): Don't mistake a branch for a
- subroutine call.
-
-1999-06-08 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (remote_wait): Add 'N' response packet, which is a
- stop with signal number plus section offsets for .text, .data and
- .bss. This is used by Cisco to indicate relocation offsets.
- (remote_cisco_section_offsets, remote_cisco_objfile_relocate):
- new files to support 'N' packet.
- (remote_info_process): New function. Implements the
- "info remote-process" command, by means of which the remote target
- can report anything it wants to about the remote process/app being
- debugged.
- (_initialize_remote): add info remote-proc command.
- (remote_threads_info): New function for "info threads" command.
- Attempts to use new query "qfThreadInfo" instead of the old
- undocumented query.
- * exec.c (exec_set_section_offsets) new files to support 'N' packet.
-
-Tue Jun 8 13:33:42 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * inferior.h (generic_target_read_pc, generic_target_write_pc,
- generic_target_read_fp, generic_target_write_fp,
- generic_target_read_sp, generic_target_write_sp): Declare new
- functions.
- * findvar.c (generic_target_read_pc, generic_target_write_pc,
- generic_target_read_fp, generic_target_write_fp,
- generic_target_read_sp, generic_target_write_sp): New functions.
- (TARGET_READ_PC, TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP,
- TARGET_READ_SP, TARGET_WRITE_SP): Default to corresponding generic
- function.
- (write_pc_pid, write_pc_pid, read_sp, write_sp, read_fp,
- write_fp): Simplify.
-
- * gdbarch.c (verify_gdbarch): Always verify TARGET_PTR_BIT,
- TARGET_SHORT_BIT, TARGET_INT_BIT, TARGET_LONG_BIT,
- TARGET_LONG_LONG_BIT, TARGET_FLOAT_BIT, TARGET_DOUBLE_BIT,
- TARGET_LONG_DOUBLE_BIT, TARGET_READ_PC, TARGET_WRITE_PC,
- TARGET_READ_FP, TARGET_WRITE_FP, TARGET_READ_SP, TARGET_WRITE_SP,
- USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY_BREAKPOINT_OFFSET_P,
- CALL_DUMMY_P, CALL_DUMMY_STACK_ADJUST_P, GET_SAVED_REGISTER,
- REGISTER_CONVERTIBLE, PUSH_ARGUMENTS, PUSH_RETURN_ADDRESS,
- FRAME_CHAIN_VALID.
- (GET_GDBARCH, SET_GDBARCH): Delete macros. Implement functions
- directly.
- * gdbarch.h, gdbarch.c: Call fatal() instead of abort(). Identify
- the function / macro with a problem. Always verify a architecture
- attribute before returning it.
- * gdbarch.h, gdbarch.c (generic_register_convertible_not): New
- function.
-
- * mips-tdep.c (mips_push_return_address): New function.
- * config/mips/tm-mips.h (PUSH_RETURN_ADDRESS): Define.
-
- * mips-tdep.c (mips_gdbarch_init): Initialize short_bit,
- double_bit, long_double_bit, read_pc, write_pc, read_fp, write_fp,
- read_sp, write_sp, frame_chain_valid, get_saved_register,
- push_arguments, push_return_address, register_convertible,
- call_dummy_p, use_generic_dummy_frames,
- call_dummy_breakpoint_offset_p, call_dummy_stack_adjust_p,
- call_dummy_words and sizeof_call_dummy_words.
- * config/mips/tm-mips.h: Don't define CALL_DUMMY when multi-arch.
-
-1999-06-07 Keith Seitz <keiths@cygnus.com>
-
- * v850ice.c (init_hidden_window): Do not rely on the existence of
- a gui for window creation. Return boolean status.
- (v850ice_open): Use boolean status of init_hidden_window.
- Allow any ICE execution command to run under CLI. Maybe one
- day gdb will use a real event loop and allow this code to run.
- * configure.tgt: Configure the v850 ice for all cygwin-hosted
- toolchains.
-
-Mon Jun 7 23:37:26 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * config/mips/tm-mips.h (EXTRA_FRAME_INFO): Delete.
- * mips-tdep.c (mips_init_extra_frame_info): Allocate saved_regs.
- (temp_saved_regs): Replace struct with a simple pointer.
- (set_reg_offset, mips32_heuristic_proc_desc, heuristic_proc_desc,
- mips_init_extra_frame_info): Update.
-
-Mon Jun 7 21:40:12 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * config/mips/tm-mips.h (EXTRA_FRAME_INFO): Move elements from here.
- * mips-tdep.c (struct frame_extra_info): To here.
-
- * mips-tdep.c (mips_print_extra_frame_info, mips_find_saved_regs,
- mips_init_extra_frame_info, mips_pop_frame): Update
- (mips_init_extra_frame_info): Allocate space for the extra info.
-
-Mon Jun 7 21:08:50 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * config/mips/tm-mips.h (mips_init_extra_frame_info), mips-tdep.c:
- Rename init_extra_frame_info. Add argument ``fromleaf''.
-
- * config/mips/tm-mips.h (mips_print_extra_frame_info),
- mips-tdep.c: New function.
- (PRINT_EXTRA_FRAME_INFO): Update definition.
-
-Mon Jun 7 20:11:07 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * config/mips/tm-mips.h, config/mips/tm-irix3.h,
- config/mips/tm-tx19.h, config/mips/tm-tx19l.h,
- config/mips/tm-tx39.h, config/mips/tm-tx39l.h: Rename macro
- REGISTER_NAMES to MIPS_REGISTER_NAMES.
-
- * config/mips/tm-mips.h (REGISTER_NAME): Define.
- * mips-tdep.c (mips_processor_reg_names): New static variable.
- (mips_register_name): New function.
- (mips_set_processor_type): Update mips_processor_reg_names.
- (mips_generic_reg_names): Initialize using MIPS_REGISTER_NAMES.
-
-Sun Jun 6 11:09:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (PBUFSIZ): Re-define so that value is computed at
- run-time.
- (MAXBUFBYTES): Re-define as a macro function.
- * gdbarch.h, gdbarch.c: Add multi-arch support for REGISTER_BYTES.
- * d10v-tdep.c, config/d10v/tm-d10v.h: Update.
-
-1999-06-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * symtab.c (decode_line_1): Accept filenames with spaces in
- 'linespecs' when enclosed in double quotation marks and handle
- drive specification is DOS format (D:).
-
-1999-06-04 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * parse.c: Don't include <ctype.h> twice.
-
-1999-06-04 David Taylor <taylor@louisiana.cygnus.com>
-
- Sat May 15 12:16:09 1999 Per Bothner <bothner@deneb.cygnus.com>
-
- * eval.c (evaluate_subexp_standard): Remove Gilmore rant.
- (Of course C has "expected types", at least if you allow
- brace-initializer expressions - as in Gcc.)
- Remove NULLing out expect_type. Do pass NULL_TYPE in place
- the incoming expect_type where appropriate.
-
-Fri Jun 4 10:56:23 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-tdep.c (hppa_fix_call_dummy): Make it work for GCC compiled
- executables without end.o. Clean up lots of mis-guided comments.
-
-Fri Jun 4 17:10:36 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * parser-defs.h (std_regs): Replace array with pointer.
- * parse.c (build_parse): Build the std_regs table according to the
- standard registers available.
- (_initialize_parse): Register std_regs and num_std_regs as
- architecture specific.
- * gdbarch.h, gdbarch.c: Add multi-arch support for SP_REGNUM,
- FP_REGNUM, PC_REGNUM, NUM_REGS, REGISTER_NAME.
- * d10v-tdep.c, config/d10v/tm-d10v.h: Update.
-
-1999-06-03 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * thread.c: eliminate the target_thread_vector (functionality
- moved into the standard target vector).
- * gdbthread.h: eliminate target_thread_vector. Move all related
- defines into remote.c, since they are no longer shared with thread.c.
- * remote.c: eliminate the target_thread_vector.
- (remote_find_new_threads): change return type to void, consistent
- with the target vector table. (cont_thread): rename continue_thread.
- (record_currthread): remove dead code. (remote_thread_alive):
- clean up and simplify. (threadref etc.): move definitions to here
- from gdbthread.h.
-
-1999-06-02 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * inftarg.c (child_create_inferior): Remove dead HPUX specific code
- which tries to find csh.
- * fork-child.c: Remove DEBUGGING predefine and conditionalized
- printfs.
- (fork_inferior): Remove dead HPUX specific code which assumes shell
- is csh.
-
- * hppa-tdep.c: Remove DEBUGGING and #if 0 debugging printfs.
- * parse.c: Ditto.
- * somread.c: Ditto.
-
- * gdbarch.h: Forward decl of struct value.
-
-Thu Jun 3 10:12:38 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (do_d10v_pop_frame): Rename d10v_pop_frame. Make
- static.
- * d10v-tdep.c (d10v_pop_frame), config/d10v/tm-d10v.h: New
- function. Call generic_pop_current_frame.
- * config/d10v/tm-d10v.h (POP_FRAME): Update.
- * gdbarch.h, gdbarch.c (frame_num_args_unknown): New function.
- * gdbarch.h, gdbarch.c: Add multi-arch support for POP_FRAME,
- SKIP_PROLOGUE, INNER_THAN, DECR_PC_AFTER_BREAK,
- FUNCTION_START_OFFSET, REMOTE_TRANSLATE_XFER_ADDRESS, FRAME_CHAIN,
- FRAME_CHAIN_VALID, FRAME_SAVED_PC, FRAME_ARGS_ADDRESS,
- FRAME_LOCALS_ADDRESS, FRAME_ARGS_SKIP,
- FRAMELESS_FUNCTION_INVOCATION, REGISTER_BYTE, REGISTER_RAW_SIZE,
- REGISTER_VIRTUAL_SIZE, REGISTER_VIRTUAL_TYPE, SAVED_PC_AFTER_CALL,
- FRAME_NUM_ARGS, MAX_REGISTER_RAW_SIZE, MAX_REGISTER_VIRTUAL_SIZE,
- REGISTER_SIZE.
- * d10v-tdep.c, config/d10v/tm-d10v.h: Update.
- * config/d10v/tm-d10v.h (DMEM_START, IMEM_START, STACK_START,
- ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM): Move definitions from
- here.
- * d10v-tdep.c: To here.
- * config/d10v/tm-d10v.h (struct type): Move declaration from here.
- * gdbarch.h: To here.
- * config/d10v/tm-d10v.h (struct frame_info, struct
- frame_saved_regs, struct type): Delete declarations.
-
-1999-06-02 Robert Hoehne <robert.hoehne@gmx.net>
-
- * go32-nat.c: go32_terminal_init, go32_terminal_inferior and
- go32_terminal_ours are new functions to save/restore the inferior`s
- stdin/stdout filemodes
-
-1999-06-02 Stan Shebs <shebs@andros.cygnus.com>
-
- * MAINTAINERS: Add Mark Kettenis, Jeff Law, and Philippe De Muyter
- as maintainers for Hurd, HP/UX, and COFF, respectively.
-
-1999-06-02 Mark Kettenis <kettenis@gnu.org>
-
- * gnu-nat.c (inf_continue): New function.
- (struct inf): Use `unsigned int' instead of `int' for bit-fields.
- Add new bit-field named `nomsg'.
- (inf_validate_procinfo): Renamed from inf_validate_stopped, all
- callers changed. Also update the `nomsg' and `traced' fields of
- INF.
- (make_inf): Initialize INF->nomsg.
- (inf_cleanup): Reset INF->nomsg.
- (inf_detach): Call `inf_validate_procinfo'. Call `inf_continue'
- instead of `inf_signal' if the inferior does not have a message
- port.
- (gnu_resume): Likewise.
- (gnu_create_inferior): Reset INF->nomsg in `attach_to_child'.
- Call `inf_validate_procinfo' after returning from `fork_inferior'.
- (gnu_attach): Update signal thread and tracing state.
-
- * config/i386/tm-i386gnu.h: Include "i386/tm-i386.h" instead of
- "i386/tm-i386v.h".
- (STACK_END_ADDR): Remove.
- (SIGCONTEXT_PC_OFFSET): New define.
- Include "tm-sysv4.h".
-
-1999-06-02 J.T. Conklin <jtc@redback.com>
-
- * config/tm-vxworks.h: New file, header for definitions common to
- all vxWorks targets.
- * config/a29k/tm-vx29k.h, config/i960/tm-vx960.h,
- config/m68k/tm-vx68.h, config/mips/tm-vxmips.h,
- config/sparc/tm-vxsparc.h: Include tm-vxworks.h.
-
-Wed Jun 2 17:37:03 1999 Jeffrey A Law (law@cygnus.com)
-
- * config/pa/tm-hppa.h (IMPORT_SHLIB): New unwind stub type.
-
-1999-06-02 Christopher Faylor <cgf@cygnus.com>
-
- * configure.tgt: Alphabetically reorder some targets.
-
-1999-06-02 Keith Seitz <keiths@cygnus.com>
-
- * v850ice.c (v850ice_xfer_memory): Insert lost "break".
-
-1999-06-02 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * rs6000-tdep.c (variants): Fix description of 750 register set.
- (Thanks to J. T. Conklin.)
-
-Wed Jun 2 16:10:08 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c: Add multi-arch support for
- STORE_STRUCT_RETURN, STORE_RETURN_VALUE,
- EXTRACT_STRUCT_VALUE_ADDRESS, USE_STRUCT_CONVENTION,
- FRAME_INIT_SAVED_REGS and INIT_EXTRA_FRAME_INFO.
- * d10v-tdep.c, config/d10v/tm-d10v.h: Update.
-
- * config/d10v/tm-d10v.h (FRAME_INIT_SAVED_REGS): Replace
- FRAME_FIND_SAVED_REGS.
- (d10v_frame_init_saved_regs): Replace d10v_frame_find_saved_regs.
- * d10v-tdep.c (d10v_pop_frame, d10v_frame_chain,
- d10v_frame_init_saved_regs): Update.
- * gdbarch.h: Disallow FRAME_FIND_SAVED_REGS when multi-arch.
-
- * gdbarch.h, gdbarch.c: Add multi-arch support for
- D10V_MAKE_DADDR, D10V_MAKE_IADDR, D10V_DADDR_P, D10V_IADDR_P,
- D10V_CONVERT_DADDR_TO_RAW and D10V_CONVERT_IADDR_TO_RAW.
- * d10v-tdep.c, config/d10v/tm-d10v.h: Update.
-
- * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete.
- * d10v-tdep.c (struct frame_extra_info): Define.
- (d10v_init_extra_frame_info, d10v_pop_frame, d10v_frame_chain,
- d10v_frame_find_saved_regs): Update.
- * gdbarch.h: Disallow EXTRA_FRAME_INFO when multi-arch.
-
-Tue Jun 1 13:36:31 1999 Philippe De Muyter <phdm@macqel.be>
-
- * config/m68k/tm-delta68.h (FRAME_NUM_ARGS): Macro prototype fixed.
- * config/m68k/tm-news.h, config/ns32k/tm-merlin.h: Ditto.
- * config/ns32k/tm-umax.h (FRAME_NUM_ARGS): Old macro definition
- removed; new macro prototype fixed.
-
-Wed Jun 2 11:18:37 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c: Add multi-arch support for
- EXTRACT_RETURN_VALUE, PUSH_ARGUMENTS, PUSH_DUMMY_FRAME,
- PUSH_RETURN_ADDRESS, POP_FRAME, FRAME_FIND_SAVED_REGS.
- * d10v-tdep.c, config/d10v/tm-d10v.h: Update.
-
- * gdbarch.h, gdbarch.c: Add multi-arch support for
- REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
- REGISTER_CONVERT_TO_RAW.
- * config/d10v/tm-d10v.h, d10v-tdep.c (d10v_gdbarch_init): Update.
-
- * defs.h (REGISTER_NAME): Move compatibility definition from here.
- * gdbarch.h: To here.
-
- * frame.h, blockframe.c (generic_fix_call_dummy): New
- stub function.
- * gdbarch.h, gdbarch.c: Add multi-arch support for FIX_CALL_DUMMY.
- * config/d10v/tm-d10v.h, d10v-tdep.c (d10v_gdbarch_init): Update.
-
-Tue Jun 1 20:06:38 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (d10v_gdbarch_init): Set get_saved_register.
- * config/d10v/tm-d10v.h: Update.
-
-Tue Jun 1 19:50:05 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c: Add multi-arch support for TARGET_READ_PC,
- TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP, TARGET_READ_SP
- and TARGET_WRITE_SP.
- * config/d10v/tm-d10v.h, d10v-tdep.c (d10v_gdbarch_init): Update.
-
-Tue Jun 1 19:19:02 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.c (default_gdbarch): Set field GET_SAVED_REGISTER to
- generic_get_saved_register.
- * gdbarch.c: Change update dispatch functions so that they check
- for a NULL function pointer.
-
-Tue Jun 1 19:19:02 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c: Add multi-arch support for TARGET_INT_BIT,
- TARGET_CHAR_BIT, TARGET_SHORT_BIT, TARGET_FLOAT_BIT,
- TARGET_DOUBLE_BIT and TARGET_LONG_DOUBLE_BIT.
- * config/d10v/tm-d10v.h, d10v-tdep.c (d10v_gdbarch_init): Update.
-
-Tue Jun 1 18:47:54 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * parse.c (build_parse): New function. Initialize
- msym_text_symbol_type, msym_data_symbol_type and
- msym_unknown_symbol_type.
- (_initialize_parse): Call build_parse.
- (_initialize_parse): Register variables msym_text_symbol_type,
- msym_data_symbol_type as msym_unknown_symbol_type as
- per-architecture.
-
-Tue Jun 1 11:30:09 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (_initialize_d10v_tdep): Register d10v as an
- architecture.
- (d10v_gdbarch_init): New function.
- * confg/d10v/tm-d10v.h (GDB_MULTI_ARCH): Define.
-
-Tue Jun 1 10:45:24 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/d10v/tm-d10v.h (REGISTER_CONVERTIBLE,
- REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Convert
- macros into functions.
- * config/d10v/tm-d10v.h, d10v-tdep.c (d10v_register_convertable,
- d10v_register_convert_to_virtual, d10v_register_convert_to_raw):
- The new functions.
-
-1999-05-31 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * stack.c (print_args_stub): Add missing stream parameter.
-
-Mon May 31 15:50:08 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- Fri May 28 16:51:00 1999 Martin Dorey <martin.dorey@madge.com>:
- * valops.c, value.h (default_push_arguments): Fix order of
- parameters to match PUSH_ARGUMENTS arguments.
-
-Thu May 27 11:42:55 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h (EXTRACT_STRUCT_VALUE_ADDRESS): Return 0.
-
- * valops.c (value_assign): Delete redundant test of
- REGISTER_CONVERTIBLE.
-
-Thu May 27 11:33:57 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/w65/tm-w65.h, config/tic80/tm-tic80.h, config/sh/tm-sh.h,
- config/i386/tm-i386m3.h, config/i386/tm-go32.h,
- config/i386/tm-cygwin.h, config/h8500/tm-h8500.h,
- config/d30v/tm-d30v.h, config/d10v/tm-d10v.h: Delete definition of
- macro NAMES_HAVE_UNDERSCORE.
-
-Thu May 27 09:31:06 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h (EXTRACT_STRUCT_VALUE_ADDRESS,
- EXTRACT_STRUCT_VALUE_ADDRESS_P): Provide default definitions.
- * values.c (value_being_returned): Use
- EXTRACT_STRUCT_VALUE_ADDRESS when EXTRACT_STRUCT_VALUE_ADDRESS_P.
-
-Wed May 26 13:51:25 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * utils.c (tui_file_new, tui_file_delete, tui_fileopen): New
- functions.
- (tui_file_isatty): Rename gdb_file_isatty.
- (gdb_file_init_astring): Use tui_file_new to create stream.
- (gdb_file_get_strbuf, gdb_file_adjust_strbuf): Call gdb_file_data
- to access the tui_stream.
- (tui_file_flush): Rename gdb_flush. Call gdb_file_data to access
- the tui_stream. Pass FILE and not STREAM down.
-
- * utils.c (struct stdio_file, stdio_file_flush, stdio_file_fputs,
- stdio_file_isatty, stdio_file_delete, stdio_file_new,
- stdio_fileopen): Define type and functions. Implement a simple
- STDIO based gdb_file.
- (struct gdb_file, gdb_file_new, gdb_file_delete, null_file_isatty,
- null_file_flush, null_file_fputs, null_file_delete, gdb_file_data,
- set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_fputs,
- set_gdb_file_data, fputs_unfiltered, gdb_flush, gdb_file_isatty):
- Define type and functions. Implement virtual functions for
- gdb_file.
-
- * defs.h (struct gdb_file): Declare.
- (GDB_FILE): Change type to struct gdb_file. Deprecate.
- (gdb_file_flush_ftype, gdb_file_fputs_ftype,
- gdb_file_isatty_ftype, gdb_file_delete_ftype): Add function type
- declarations.
-
- * defs.h (set_gdb_file_flush, set_gdb_file_fputs,
- set_gdb_file_isatty, set_gdb_file_data, gdb_file_new,
- gdb_file_delete, gdb_file_data, stdio_fileopen, tui_fileopen): Add
- function declarations.
- (gdb_fopen): Re-implement. Call stdio_file_new.
- (gdb_fclose): Re-implement. Call gdb_file_delete.
-
- * main.c (tui_file_fputs): Rename fputs_unfiltered. Use
- gdb_file_data to gain access to the tui_stream data. Use FILE
- instead of STREAM where applicable.
- (main): Create gdb_stdout and gdb_stderr using tui_fileopen.
-
- * defs.h (struct tui_stream): Add field ts_magic.
- * utils.c (tui_file_magic): Local variable.
- (tui_file_new): Set field ts_magic.
- (tui_file_delete, tui_file_isatty, gdb_file_init_astring,
- gdb_file_get_strbuf, gdb_file_adjust_strbuf, tui_file_flush):
- Verify ts_magic.
-
-1999-05-25 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * breakpoint.c (insert_breakpoints, remove_breakpoint,
- breakpoint_1): Add a 'default' case, which prints a warning
- message, to remove EGCS warnings.
-
-1999-05-25 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * utils.c (gdb_file_adjust_strbuf): Take into account the
- possibility that the buffer has not been allocated yet.
-
-Tue May 25 16:05:11 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
- REGISTER_CONVERT_TO_RAW): Provide default definition.
-
- * valops.c (value_assign), infcmd.c (do_registers_info), findvar.c
- (value_from_register, value_of_register): Remove #ifdef
- REGISTER_CONVERTIBLE. Assume REGISTER_CONVERTIBLE etc defined.
-
-1999-05-25 Keith Seitz <keiths@cygnus.com>
-
- * config/mcore/tm-mcore.h (FRAME_NUM_ARGS): Re-write definition of
- FRAME_NUM_ARGS so that it returns NUM_ARGS as a result instead of
- setting a variable as a side effect.
-
-Tue May 25 16:18:25 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * remote-d10v.c (d10v_eva_prepare_to_trace,
- d10v_eva_get_trace_data), remote-sim.c (_initialize_remote_sim):
- Add declaraton. Make static.
-
- * remote-d10v.c (_initialize_remote_d10v), d10v-tdep.c
- (_initialize_d10v_tdep): Add declaration.
- * config/d10v/tm-d10v.h (d10v_frame_chain): Add declaration.
-
-Tue May 25 15:20:58 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * main.c (init_proc, proc_remove_foreign): Delete function.
- * inftarg.c (child_mourn_inferior): Update. Delete call to
- proc_remove_foreign().
- * top.c (gdb_init): Update. Delete call to init_proc().
-
- * utils.c (pollquit, fmthex, hexlate): Delete function.
-
-Tue May 25 13:01:43 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * main.c (gdb_init): Move declaration from here.
- * top.h: To here.
-
- * defs.h (init_page_info): Add declaration.
-
- * top.c (initialize_utils): Move declaration from here.
- * defs.h: To here.
-
- * infcmd.c (target_map_name_to_register): Move declaration from
- here.
- * parser-defs.h: To here.
-
- * c-typeprint.c (cp_type_print_method_args), target.c
- (nosupport_runtime, normal_target_post_startup_inferior): Add
- declaration. Make static.
-
-Tue May 25 13:53:23 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * main.c: Include "event-loop.h".
- * Makefile.in (main.o): Add dependency.
-
- * top.h (setup_event_loop, async_init_signals), top.c
- (set_async_editing_command, set_async_annotation_level,
- set_async_prompt), event-loop.c (display_gdb_prompt): Move
- declarations from here.
- * event-loop.h: To here.
-
- * event-loop.h (delete_async_signal_handler): Add function
- declaration.
-
- * event-top.c (change_annotation_level, command_handler): Add
- declaration. Make static.
-
-Tue May 25 12:44:58 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * tracepoint.c (free_actions_list, add_register): Add declaration.
- Make static.
- (free_actions_list_cleanup_wrapper): New function. Wraps
- free_actions_list for make_cleanup.
- (trace_start_command): Pass free_actions_list_cleanup_wrapper
- instead of free_actions_list to make_cleanup.
- (_initialize_tracepoint): Add extern declaration.
-
-Tue May 25 12:23:39 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * jv-typeprint.c (java_type_print_base, jv-valprint.c
- (java_print_value_fields): Add static declaration.
-
- * jv-lang.c (java_lookup_type, get_java_utf8_name,
- java_lookup_type): Add static declaration.
- (get_java_class_symtab, java_class_is_primitive,
- java_value_string): Add declaration. Make static.
- (java_rerun_cleanup): Add extern declaration for this stub
- function.
-
-Tue May 25 12:06:29 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h: When multi-arch, check that REGISTER_NAMES was not
- defined.
-
-Mon May 24 16:16:29 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * inflow.c (_initialize_inflow), annotate.c
- (_initialize_annotate), os9kread.c (_initialize_os9kread),
- serial.c (_initialize_serial), nlmread.c (_initialize_nlmread),
- f-valprint.c (_initialize_f_valprint), cp-valprint.c
- (_initialize_cp_valprint), typeprint.c (_initialize_typeprint),
- complaints.c (_initialize_complaints), scm-lang.c
- (_initialize_scheme_language), m2-lang.c
- (_initialize_m2_language), dbxread.c (_initialize_dbxread),
- f-lang.c (_initialize_f_language), ch-lang.c
- (_initialize_chill_language), c-lang.c (_initialize_c_language),
- corefile.c (_initialize_core), stabsread.c
- (_initialize_stabsread), mipsread.c (_initialize_mipsread),
- elfread.c (_initialize_elfread), coffread.c
- (_initialize_coffread), maint.c (_initialize_maint_cmds),
- demangle.c (_initialize_demangler), maint.c
- (_initialize_maint_cmds), language.c (_initialize_language): Add
- external declaration.
-
-Mon May 24 10:04:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/v850/tm-v850.h,
- config/tic80/tm-tic80.h, config/tahoe/tm-tahoe.h,
- config/rs6000/tm-rs6000.h, config/sparc/tm-sparc.h,
- config/sh/tm-sh.h, config/pyr/tm-pyr.h, config/pa/tm-hppa.h,
- config/ns32k/tm-merlin.h, config/mn10300/tm-mn10300.h,
- config/mn10200/tm-mn10200.h, config/mips/tm-mips.h,
- config/m88k/tm-m88k.h, config/m68k/tm-news.h,
- config/m68k/tm-delta68.h, config/m68k/tm-isi.h,
- config/m68k/tm-m68k.h, config/m32r/tm-m32r.h,
- config/i960/tm-i960.h, config/i386/tm-i386v.h,
- config/i386/tm-i386.h, config/h8500/tm-h8500.h,
- config/h8300/tm-h8300.h, config/fr30/tm-fr30.h,
- config/d30v/tm-d30v.h, config/d10v/tm-d10v.h,
- config/convex/tm-convex.h, config/arc/tm-arc.h,
- config/arm/tm-arm.h, config/alpha/tm-alpha.h,
- config/a29k/tm-a29k.h: Re-write definition of FRAME_NUM_ARGS so
- that it returns NUM_ARGS as a result instead of setting a variable
- as a side effect.
-
- * ns32k-tdep.c (merlin_frame_num_args), tahoe-tdep.c
- (tahoe_frame_num_args), vax-tdep.c (vax_frame_num_args),
- m68k-tdep.c (news_frame_num_args, delta68_frame_num_args,
- isi_frame_num_args), convex-tdep.c (convex_frame_num_args): New
- functions.
-
- * stack.c (print_args_stub): Update use of FRAME_NUM_ARGS.
-
-Mon May 24 11:57:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote.c (remote_xfer_memory): Re-write with assumption that
- REMOTE_TRANSLATE_XFER_ADDRESS is defined. Pass targ_addr and
- targ_len by reference.
- (REMOTE_TRANSLATE_XFER_ADDRESS): Provide default definition.
-
- * remote-d10v.c (remote_d10v_translate_xfer_address): Update.
- * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Update.
-
-Mon May 24 12:10:58 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * value.h (default_push_arguments): Add function declaration.
-
- * alpha-tdep.c (alpha_about_to_return), gdbarch.c (verify_gdbarch,
- arch_ok, set_arch), command.c (find_cmd), infrun.c
- (follow_inferior_fork, follow_fork, follow_vfork,
- set_schedlock_func, is_internal_shlib_eventpoint,
- stopped_for_internal_shlib_event, stopped_for_shlib_catchpoint,
- xdb_handle_command), infcmd.c (run_no_args_command, go_command),
- symfile.c (add_filename_language, set_ext_lang_command,
- info_ext_lang_command, init_filename_language_table), symtab.c
- (overload_list_add_symbol), defs.h (default_get_saved_register),
- ax-general.c (grow_expr, append_const, read_const, generic_ext):
- Ditto.
-
- * infrun.c (currently_stepping): Ditto. Make static.
-
- * valops.c (hand_function_call): Explictly type static variable
- ``checked''.
-
-Mon May 24 08:36:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (d10v_breakpoint_from_pc, d10v_register_name,
- d10v_register_byte, d10v_register_raw_size,
- d10v_register_virtual_size, d10v_register_virtual_type,
- d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
- d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw,
- d10v_store_struct_return, d10v_store_return_value,
- d10v_extract_struct_value_address, d10v_frame_saved_pc,
- d10v_frame_args_address, d10v_frame_locals_address,
- d10v_saved_pc_after_call): New functions.
-
- * config/d10v/tm-d10v.h (REGISTER_BYTE, REGISTER_RAW_SIZE,
- REGISTER_VIRTUAL_SIZE, REGISTER_VIRTUAL_TYPE, STORE_STRUCT_RETURN,
- D10V_MAKE_DADDR, D10V_MAKE_IADDR, D10V_DADDR_P, D10V_IADDR_P,
- D10V_CONVERT_DADDR_TO_RAW, D10V_CONVERT_IADDR_TO_RAW,
- STORE_STRUCT_RETURN, STORE_RETURN_VALUE,
- EXTRACT_STRUCT_VALUE_ADDRESS, SAVED_PC_AFTER_CALL, FRAME_SAVED_PC,
- FRAME_ARGS_ADDRESS): Re-define using new functions.
-
- * config/d10v/tm-d10v.h (BREAKPOINT_FROM_PC): Replace BREAKPOINT.
- (REGISTER_NAME): Replace REGISTER_NAMES.
-
- * utils.c (core_addr_lessthan, core_addr_greaterthan): New
- functions.
- * defs.h (core_addr_lessthan, core_addr_greaterthan): Declare.
-
-Sat May 22 16:44:06 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * utils.c (n_spaces): Handle case where first call has N equal to
- zero.
- (print_spaces): Use n_spaces.
-
-Fri May 21 11:23:54 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * valops.c (value_push): Remove conditional definition based on
- absense of macro PUSH_ARGUMENTS. Pass SP and STRUCT_ADDR by
- reference.
- (default_push_arguments): New function.
-
- * config/v850/tm-v850.h, config/tic80/tm-tic80.h,
- config/sparc/tm-sparc.h, config/sparc/tm-sp64.h,
- config/sh/tm-sh.h, config/rs6000/tm-rs6000.h, config/pa/tm-hppa.h,
- config/mn10300/tm-mn10300.h, config/mn10200/tm-mn10200.h,
- config/mips/tm-mips.h, config/m32r/tm-m32r.h,
- config/h8300/tm-h8300.h, config/fr30/tm-fr30.h,
- config/d30v/tm-d30v.h, config/d10v/tm-d10v.h, config/arm/tm-arm.h,
- config/alpha/tm-alpha.h: Update definition of PUSH_ARGUMENTS.
- Return updated SP.
-
- * rs6000-tdep.c (rs6000_push_arguments): Rename push_arguments.
-
-Thu May 20 12:18:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * blockframe.c (get_prev_frame): Remove #ifdef around test for
- FRAMELESS_FUNCTION_INVOCATION.
- (get_prev_frame): Change FRAMELESS_FUNCTION_INVOCATION call to a
- function invocation.
- * i386-tdep.c (i386_frame_num_args), stack.c (frame_info): Ditto.
- * config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h,
- config/sparc/tm-sparc.h, config/sh/tm-sh.h,
- config/rs6000/tm-rs6000.h, config/pa/tm-hppa.h,
- config/mips/tm-mips.h, config/m88k/tm-m88k.h,
- config/m68k/tm-m68k.h, config/i960/tm-i960.h,
- config/i386/tm-sun386.h, config/i386/tm-i386v.h,
- config/i386/tm-i386.h, config/h8500/tm-h8500.h,
- config/h8300/tm-h8300.h, config/fr30/tm-fr30.h,
- config/d30v/tm-d30v.h, config/d10v/tm-d10v.h,
- config/convex/tm-convex.h, config/arm/tm-arm.h,
- config/arc/tm-arc.h, config/alpha/tm-alpha.h,
- config/a29k/tm-a29k.h: Update FRAMELESS_FUNCTION_INVOCATION.
- * fr30-tdep.c (fr30_frameless_function_invocation), convex-tdep.c
- (convex_frameless_function_invocation), arm-tdep.c
- (arm_frameless_function_invocation): New functions.
-
-1999-05-20 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * top.c: Change dates in comments to ISO format.
-
- * event-top.c: Ditto.
- * event-loop.c: Ditto.
- * main.c: Ditto.
-
-1999-05-19 Keith Seitz <keiths@cygnus.com>
-
- * config/mcore/tm-mcore.h (BELIEVE_PCC_PROMOTION): Define. We
- really do want to believe what gcc tells us about types...
-
-1999-05-19 Keith Seitz <keiths@cygnus.com>
-
- * config/mcore/tm-mcore.h (FRAME_ARGS_ADDRESS): Define to a function.
- (FRAME_LOCALS_ADDRESS): Ditto.
- * mcore-tdep.c (mcore_frame_args_addcress): New function.
- (mcore_frame_locals_address): New function.
-
- * monitor.c (monitor_open): Only assume we have eight
- breakpoints if the monitor implementation does not tell
- us how many there really are. Alloc memory for these
- dynamically.
- (monitor_close): Free memory associated with breakpoint
- storage.
- (monitor_insert_breakpoint): Don't rely on a hardcoded
- number of breakpoints.
- (monitor_remove_breakpoint): Ditto.
- (NUM_MONITOR_BREAKPOINTS): Removed and replaced with monitor_ops
- specification.
- * monitor.h (struct monitor_ops): Add new member so that the
- individual monitor implementations can tell us how many
- breakpoints the monitor supports.
-
- * mcore-rom.c (init_picobug_cmds): Add number of breakpoints supported
- by picobug monitor.
-
-1999-05-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- From Philippe De Muyter <phdm@macqel.be>:
- * event-loop.h: Include sys/wait.h only if HAVE_SYS_WAIT_H.
-
-1999-05-17 Keith Seitz <keiths@cygnus.com>
-
- * configure.tgt: Add MCore target.
- * Makefile.in: Add mcore-tdep.c and mcore-rom.c
- * config/mcore/tm-mcore.h: New file.
- * config/mcore/mcore.mt: New file.
- * mcore-rom.c: New file.
- * mcore-tdep.c: New file.
-
-1999-05-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * top.c (print_command_line): Added the missing stream argument.
- * gdbcmd.h: Added argument to prototype.
- * command.c: Fixed call to include extra argument.
- * breakpoint.c: Same.
-
-1999-05-14 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Targets are #defining PREPARE_TO_PROCEED with inconsistent numbers
- of arguments. Since the Mach 3 target needs an argument, we'll
- make things consistent by adding an argument everywhere.
- * infrun.c (proceed): Pass an argument to PREPARE_TO_PROCEED.
- * config/pa/nm-hppah.h (PREPARE_TO_PROCEED): Add ignored argument
- to definition.
-
-1999-05-11 Stan Shebs <shebs@andros.cygnus.com>
-
- Fri Apr 23 13:27:34 PDT 1999 Toshiyasu Morita (tm@netcom.com)
- * sh-stub.c: Mostly localize processor dependencies.
-
-1999-05-10 Martin Hunt <hunt@cygnus.com>
-
- * debugify.c, debugify.h: Removed because they are no
- longer used.
-
-1999-05-08 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * infrun.c (_initialize_infrun): Handle TARGET_SIGNAL_LWP,
- TARGET_SIGNAL_WAITING, and TARGET_SIGNAL_CANCEL like SIGALRM or
- SIGIO --- pass them through to the inferior silently.
- * target.h (enum target_signals): Add TARGET_SIGNAL_CANCEL, for
- Solaris's SIGCANCEL.
- * target.c (target_signal_from_host, target_signal_to_host): Add
- mapping between SIGCANCEL and TARGET_SIGNAL_CANCEL.
- (signals): Add entry for SIGCANCEL.
-
-1999-05-07 Stan Shebs <shebs@andros.cygnus.com>
-
- After years of talking about it, finally break up the
- wait_for_inferior loop.
- * infrun.c (struct execution_control_state): New struct,
- holds what used to be local vars governing wfi behavior.
- (init_execution_control_state): New function, was code in
- wfi that set up execution control state.
- (handle_inferior_event): New function, was body of main
- wfi loop. Rewrite all local var references to go through
- the ecs structure passed into this function.
- (wait_for_inferior): Rewrite to set up and use execution control
- state, and to call the new functions.
- (currently_stepping): New function, was the macro
- CURRENTLY_STEPPING.
- (enum infwait_states): Rename from wfi_states.
- (infwait_normal_state, etc): Similarly.
-
-Thu May 6 15:25:32 1999 Philippe De Muyter <phdm@macqel.be>
-
- * coffread.c (coff_symtab_read): Call `record_line' with the line
- number of the ".bf" symbol only for one-line functions.
-
-1999-05-06 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * Makefile.in: thread.o depends on target.h.
-
-1999-05-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * event-top.c (change_line_handler): Use POLLIN instead of
- POLLRDNORM, for compatibility with Linux.
- (setup_event_loop): Ditto.
-
-1999-05-06 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * mips-tdep.c (heuristic_proc_start): Rewrite cryptic error
- message about hitting the "heuristic fence post" with something
- that actually gives the user a fighting chance of figuring out
- why GDB is unhappy.
-
-1999-05-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * top.c: Include event-loop.h.
- (init_main): Add async version of 'set prompt' command.
- If in async mode define the editing and annotate set
- commands in a different way.
- Initialize new variable asyn_command_editing_p to 1.
- Initialize the gdb prompt for async mode.
- (quit_cover): Make not static, for use by the event loop.
- (gdb_init): Call async_init_signals for the asynchronous case.
- (source_line_number, source_file_name, source_error,
- source_pre_error, history_expansion_p): Make non-static, so
- event-top.c can use them.
- (command_loop_marker): Make non-static, for use in event-top.c.
- Include event-loop.h.
-
- * top.h: Add prototype for async_init_signals.
- (SET_TOP_LEVEL): Move here from main.c.
- Add setup_event_loop to exported functions.
-
- * defs.h: Add async_hook to exported variables.
-
- * main.c (SET_TOP_LEVEL): Move to top.h, so that it is visible in
- event-loop.c. Add new global variable async to determine whether
- we are running in async mode or not.
- (main): Add support for --async switch. Use async_hook to call
- setup_event_loop, when running in async mode.
-
- * event-top.c: New file. Gdb input line handler and command line
- handler for the event loop. Initialization of signal handlers.
- All the handled signals have handlers called handle_<signalname>.
- Set up all the appropriate tokens for asynchronous signal
- handling.
-
- * event-loop.h: New file. Data structures and definitions for the
- event loop.
-
- * event-loop.c: New file. Functions for the event loop
- implementation.
-
- * config.in: Regenerate with autoheader.
-
- * configure.in (AC_CHECK_FUNCS): Add poll to list of functions
- to be checked for.
-
- * configure: Regenerate.
-
- * Makefile.in (SFILES): Add new source files.
- (eventloop_h): Define.
- (COMMON_OBS): Add new object files.
- (event-loop.o): Add rule for target object.
- (event-top.o): Ditto.
-
-1999-05-05 Stan Shebs <shebs@andros.cygnus.com>
-
- * infrun.c (wait_for_inferior): Transform breaks and continues
- into gotos, move the target_wait to the very top of the loop.
-
-1999-05-05 Jonathan Larmour <jlarmour@cygnus.co.uk>
-
- * configure.in: Ensure that GDB links with libuser32.a under
- cygwin because libreadline requires it.
- * Makefile.in (WIN32LIBS): Substitute in result from configure
- * configure: regenerate
-
-1999-05-04 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Fix from John Rigby. Richard Henderson says it seems okay.
- * alpha-tdep.c (PROC_DUMMY_FRAME): As long as we're abusing fields
- of (proc)->pdr, we ought to at least abuse one large enough to
- hold the value we're trying to store in it. iopt is only 32 bits
- wide; cbLineOffset is a bfd_vma.
-
-1999-05-04 DJ Delorie <dj@cygnus.com>
-
- DJGPP changes from Robert Hoehne <robert.hoehne@gmx.net>
-
- * ser-go32.c: correct includes
- * source.c (openp): use ROOTED_P instead of SLASH_P
- * go32-nat.c: enhance exception and NPX handling
- (go32_kill_inferior): fix small bug killing inferior
- * configure.in: don't look for termcap with djgpp
- * configure: rebuild
-
-1999-05-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * main.c (main): Comment out unused and undocumented command line
- option '-'.
-
-1999-04-30 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Cleanup from Philippe De Muyter:
- * configure.in (BFD_NEED_DECLARATION): Check also for strstr.
- * acconfig.h (NEED_DECLARATION_MALLOC, NEED_DECLARATION_REALLOC,
- NEED_DECLARATION_FREE, NEED_DECLARATION_STRERROR): Define slots
- removed; they are now generated automatically.
- * gdb_string.h (strstr): Provide function prototype if
- NEED_DECLARATION_STRSTR.
- * configure, config.in: Regenerated.
-
-Fri Apr 30 11:16:09 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * target.h (to_find_new_threads): new target ops vector.
- (target_find_new_threads): define.
- * target.c (update_current_target): inherit new target ops vector.
- * remote.c: Setup to_find_new_threads vector.
- * sol-thread.c: ditto.
- * thread.c (target_find_new_threads): rename: local_find_new_threads.
- (info_threads_command): call target_find_new_threads by new method,
- as a target ops vector, rather than previous macro definition method.
- * infcmd.c (go_command): define only if in xdb mode.
- * procfs.c: fix typo in comment.
-
-Fri Apr 30 01:02:05 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppah-nat.c: Fix various coding convention violations introduced
- by HP.
- (child_acknowledge_created_inferior): Do nothing if PT_SET_EVENT_MASK
- is not defined.
-
-1999-04-28 Stan Shebs <shebs@andros.cygnus.com>
-
- * TODO: Add some items inspired by review of the manual.
-
-Tue Apr 27 17:38:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/z8k/tm-z8k.h, config/v850/tm-v850.h,
- config/tic80/tm-tic80.h, config/sparc/tm-sparc.h,
- config/sh/tm-sh.h, config/pyr/tm-pyr.h, config/pa/tm-hppa.h,
- config/mn10300/tm-mn10300.h, config/mn10200/tm-mn10200.h,
- config/mips/tm-mips.h, config/m88k/tm-m88k.h,
- config/m68k/tm-m68k.h, config/m32r/tm-m32r.h,
- config/i960/tm-i960.h, config/i386/tm-i386.h,
- config/h8500/tm-h8500.h, config/h8300/tm-h8300.h,
- config/fr30/tm-fr30.h, config/d30v/tm-d30v.h,
- config/d10v/tm-d10v.h, config/alpha/tm-alpha.h,
- config/arm/tm-arm.h, config/a29k/tm-a29k.h, config/arc/tm-arc.h:
- Change SKIP_PROLOGUE and SKIP_PROLOGUE_FRAMELESS_P macros so that
- they return the new address.
-
- * sparc-tdep.c (sparc_skip_prologue), hppa-tdep.c
- (hppa_skip_prologue), m88k-tdep.c
- (m88k_skip_prologue), i960-tdep.c
- (i960_skip_prologue), arc-tdep.c
- (arc_skip_prologue), a29k-tdep.c (a29k_skip_prologue): Rename
- skip_prologue function.
-
- * config/m68k/tm-isi.h: Convert macro SKIP_PROLOGUE into a new
- function.
- * m68k-tdep.c (isi_skip_prologue): That new function.
- * vax-tdep.c (vax_skip_prologue), config/vax/tm-vax.h: Ditto.
- * tahoe-tdep.c (tahoe_skip_prologue), config/tahoe/tm-tahoe.h: Ditto.
- * rs6000-tdep.c (rs6000_skip_prologue), config/rs6000/tm-rs6000.h:
- Ditto.
- * ns32k-tdep.c (umax_skip_prologue), config/ns32k/tm-umax.h: Ditto.
- * config/ns32k/tm-merlin.h, ns32k-tdep.c (merlin_skip_prologue):
- Ditto.
- * config/m68k/tm-altos.h, m68k-tdep.c (altos_skip_prologue): Ditto.
- * config/convex/tm-convex.h, convex-tdep.c (convex_skip_prologue):
- Ditto.
-
- * symtab.c (in_prologue, find_function_start_sal, decode_line_1),
- infrun.c (wait_for_inferior), blockframe.c
- (frameless_look_for_prologue): Update.
- * config/fr30/tm-fr30.h (FRAMELESS_FUNCTION_INVOCATION): Update.
-
-1999-04-27 Stan Shebs <shebs@andros.cygnus.com>
-
- * TODO: Remove item about DEBUG_EXPRESSIONS, no longer meaningful.
-
- * infrun.c (enum wfi_state): New enum.
- (wait_for_inferior): Merge all but one of the target_wait calls
- into a single call, add a wfi_state variable to encode which of
- the calls is being made.
-
-1999-04-26 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Fix from Dave Holcomb.
- * hpux-thread.c (init_hpux_thread_ops): Use the right function
- name when initializing hpux_thread_ops.to_thread_alive.
-
- * coffread.c (coff_symfile_read): If we have a `.stab' section,
- but no `.stabstr' section, then print an error message; don't
- crash.
-
-1999-04-26 Jim Blandy <jimb@zwingli.cygnus.com>
-
- 1999-04-25 Mark Kettenis <kettenis@gnu.org>
-
- * gnu-nat.c (gnu_attach): Call target_terminal_init before calling
- inf_set_traced, since that function calls code that might try to
- restore the terminal settings.
-
-Mon Apr 26 08:55:46 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c: More format cleanups.
-
-Sun Apr 25 18:54:51 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h (CALL_DUMMY_STACK_ADJUST_P): Replace
- SIZEOF_CALL_DUMMY_STACK_ADJUST_P.
- (CALL_DUMMY_STACK_ADJUST): Replace
- SIZEOF_CALL_DUMMY_STACK_ADJUST_P.
- * gdbarch.c (gdbarch_call_dummy_stack_adjust,
- set_gdbarch_call_dummy_stack_adjust): Define.
-
-Fri Apr 23 15:00:25 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.c (arch_ok): New function. Fix logic test for a valid
- architecture.
- (set_arch): Use.
-
-1999-04-22 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * README: Note that readline is not installed as a part of
- make install.
-
-Thu Apr 22 21:02:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c (GET_SAVED_REGISTER, get_saved_register):
- Add.
- (struct gdbarch, verify_gdbarch, gdbarch_alloc, gdbarch_dump,
- default_gdbarch): Update.
-
- * value.h (get_saved_register): Cleanup prototype.
- * findvar.c (default_get_saved_register): Rename function
- get_saved_register.
- (GET_SAVED_REGISTER): Define as default_get_saved_register when
- undefined.
- (get_saved_register): Always declare. Call GET_SAVED_REGISTER.
-
- * sparc-tdep.c (sparc_get_saved_register): Rename function
- get_saved_register.
- * config/sparc/tm-sparc.h (GET_SAVED_REGISTER): Update.
- * a29k-tdep.c (a29k_get_saved_register): Rename function
- get_saved_register.
- * config/a29k/tm-a29k.h (GET_SAVED_REGISTER): Update.
-
- * config/d10v/tm-d10v.h, config/powerpc/tm-ppc-eabi.h,
- config/h8300/tm-h8300.h, config/m32r/tm-m32r.h,
- config/mn10200/tm-mn10200.h, config/mn10300/tm-mn10300.h,
- config/sh/tm-sh.h, config/tic80/tm-tic80.h, config/v850/tm-v850.h:
- Update macro GET_SAVED_REGISTER so that it calls
- generic_get_saved_register.
- * v850-tdep.c, tic80-tdep.c, sh-tdep.c, mn10300-tdep.c,
- mn10200-tdep.c, m32r-tdep.c, h8300-tdep.c, rs6000-tdep.c: Delete
- function get_saved_register.
-
-Thu Apr 22 13:32:23 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.c: Cleanup. Re-order the definition of the ``struct
- gdbarch'' initialization functions so that maintenance is more
- straightforward.
-
-Thu Apr 22 11:07:21 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h, gdbarch.c (use_generic_dummy_frames,
- USE_GENERIC_DUMMY_FRAMES): Add.
- (struct gdbarch, verify_gdbarch, gdbarch_alloc, gdbarch_dump,
- default_gdbarch): Update.
-
- * config/v850/tm-v850.h, config/tic80/tm-tic80.h,
- config/sh/tm-sh.h, config/powerpc/tm-ppc-eabi.h,
- config/mn10300/tm-mn10300.h, config/mn10200/tm-mn10200.h,
- config/m32r/tm-m32r.h, config/h8300/tm-h8300.h,
- config/fr30/tm-fr30.h, config/d10v/tm-d10v.h: Give the
- USE_GENERIC_DUMMY_FRAMES macro the value one.
- * inferior.h (USE_GENERIC_DUMMY_FRAMES): Default to a value of
- zero.
-
- * blockframe.c (generic_find_dummy_frame,
- generic_pc_in_call_dummy, generic_read_register_dummy,
- generic_push_dummy_frame, generic_pop_current_frame,
- generic_pop_dummy_frame, generic_frame_chain_valid,
- generic_get_saved_register): Always define.
-
- * breakpoint.c (frame_in_dummy): Convert #ifdef
- USE_GENERIC_DUMMY_FRAMES to runtime test.
-
- * rs6000-tdep.c (pop_frame, push_arguments, push_arguments,
- push_arguments, frame_saved_pc, rs6000_frame_chain,
- rs6000_frame_chain): Convert #ifdef USE_GENERIC_DUMMY_FRAMES to
- runtime test.
- (get_saved_register): Always define.
-
-Wed Apr 21 17:15:52 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.c (gdbarch_dump): Fix robustness check on
- BELIEVE_PCC_PROMOTION_TYPE.
-
-Wed Apr 21 15:39:27 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h (TARGET_BYTE_ORDER_SELECTABLE_P): When multi-arch,
- force selectable byte order.
- (CALL_DUMMY): Check for CALL_DUMMY definition when multi-arch. Are
- incompatible.
- * gdbarch.c (verify_gdbarch): Check call_dummy_stack_adjust.
-
-Wed Apr 21 14:45:44 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.c (gdbarch_update): Move dump-arch code from here.
- (gdbarch_dump): To here. Make more robust.
- * gdbarch.h (gdbarch_dump): Add prototype.
-
- * gdbarch.c (enum set_arch): Declare.
- (set_arch): Add type parameter. Only disable
- ``target_architecture_auto'' when set_arch_manual.
- (set_architecture, set_architecture_from_arch_mach,
- set_architecture_from_file): Update.
- (set_arch): When ``gdbarch_debug'', gdbarch_dump() the current
- architecture.
-
-Wed Apr 21 10:48:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * frame.h (generic_pc_in_call_dummy): Make signature consistent
- with other pc_in_call_dummy functions by adding SP parameter.
- * blockframe.c (generic_pc_in_call_dummy): Update. Pass SP and
- not FP to generic_find_dummy_frame().
- * breakpoint.c (frame_in_dummy): Update.
- * config/v850/tm-v850.h, config/tic80/tm-tic80.h,
- config/sh/tm-sh.h, config/mn10300/tm-mn10300.h,
- config/mn10200/tm-mn10200.h, config/m32r/tm-m32r.h,
- config/h8300/tm-h8300.h, config/fr30/tm-fr30.h,
- config/d10v/tm-d10v.h: Update PC_IN_CALL_DUMMY definition.
-
-Tue Apr 20 12:15:45 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/d10v/tm-d10v.h (GDB_TARGET_IS_D10V): Move from here.
- * gdbarch.h (GDB_TARGET_IS_D10V): To here. Implement using
- TARGET_ARCHITECTURE.
- (D10V_MAKE_DADDR, D10V_MAKE_IADDR): Provide fatal default
- definitions.
-
- * valops.c (value_at): Replace #ifdef GDB_TARGET_IS_D10V code with
- runtime test.
- (value_fetch_lazy): Ditto.
- * values.c (unpack_long): Ditto.
- * printcmd.c (print_frame_args): Ditto.
-
-Sat Apr 17 15:39:33 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h: Cleanup multi-arch comments.
-
-Fri Apr 16 15:39:10 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h: Provide definition if GDB_MULTI_ARCH > 1 or
- GDB_MULTI_ARCH > 0 and no previous definition.
- * gdbarch.c (verify_gdbarch): Only verify a full multi-arch
- target.
-
-1999-04-15 Stan Shebs <shebs@andros.cygnus.com>
-
- * infrun.c (wait_for_inferior) [HAVE_STEPPABLE_WATCHPOINT,
- HAVE_NONSTEPPABLE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT]: Test
- at runtime instead of compile time.
-
-1999-04-14 Philippe De Muyter <phdm@macqel.be>
-
- * breakpoint.c (maintenance_info_breakpoints): Function made
- static to match previous prototype.
-
- * coffread.c (coff_record_line): Static function removed.
- (enter_linenos): Call `record_line' instead of `coff_record_line'.
- (FILE-LEVEL, coff_start_symtab, coff_end_symtab): `coff_record_line'
- -related stuff removed.
- (coff_symfile_read): Redundant statement removed.
- (coff_symtab_read): `record_line' is now called with the first line
- number of each function, given by the ".bf" symbol. This solves
- the line-number bug for one-line functions.
-
-Wed Apr 14 11:09:45 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.h (BELIEVE_PCC_PROMOTION_TYPE, BELIEVE_PCC_PROMOTION):
- Add multi-arch definitions.
- * gdbarch.c (gdbarch_believe_pcc_promotion,
- gdbarch_believe_pcc_promotion_type): New functions.
- (gdbarch_update): Update
- (struct gdbarch default_gdbarch): Update.
-
- * stabsread.c (BELIEVE_PCC_PROMOTION_TYPE): Provide default.
- (define_symbol): Change #if BELIEVE_PCC_PROMOTION_TYPE and #if
- BELIEVE_PCC_PROMOTION to if().
-
-1999-04-13 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in (HAVE_MULTIPLE_PROC_FDS): Don't define if we're
- on a Solaris host (of any architecture).
- * configure: Regenerated.
-
-Wed Apr 14 08:23:32 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdbarch.c (SET_GDBARCH, GET_GDBARCH, FSET_GDBARCH): New macros.
- (gdbarch_byte_order, gdbarch_long_bit, gdbarch_long_long_bit,
- gdbarch_ptr_bit, gdbarch_call_dummy_location,
- gdbarch_call_dummy_address, gdbarch_call_dummy_address,
- gdbarch_call_dummy_breakpoint_offset,
- gdbarch_call_dummy_breakpoint_offset, gdbarch_call_dummy_length,
- gdbarch_pc_in_call_dummy, dbarch_call_dummy_breakpoint_offset_p,
- dbarch_call_dummy_p, dbarch_call_dummy_words,
- dbarch_sizeof_call_dummy_words, dbarch_call_dummy_stack_adjust,
- dbarch_call_dummy_stack_adjust_p): Define using new macros.
-
-1999-04-13 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * rom68k-rom.c (init_rom68k_cmds): Fix an accidental substitution
- in monitor command strings, fix some formatting mistakes.
-
-1999-04-13 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.tgt (arm-*-*): Whack another vestige of wingdb.
-
-1999-04-12 James Ingham <jingham@cygnus.com>
-
- * arm-tdep.c (arm_pop_frame): don't clobber the previous frame's
- stack pointer (stored in frame->framereg's register) BEFORE
- reading it. This was causing "return" to behave very oddly.
-
-1999-04-12 Stan Shebs <shebs@andros.cygnus.com>
-
- * NEWS: Mention tic80.
-
-1999-04-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * a68v-nat.c: Remove reference to 'extern char registers[]' throughout.
- * altos-xdep.c: Ditto.
- * arm-xdep.c: Ditto.
- * convex-xdep.c: Ditto.
- * cxux-nat.c: Ditto.
- * hp300ux-nat.c: Ditto.
- * hppab-nat.c: Ditto.
- * i386aix-nat.c: Ditto.
- * i386mach-nat.c: Ditto.
- * m88k-nat.c: Ditto.
- * ptx4-nat.c: Ditto.
- * pyr-xdep.c: Ditto.
- * rs6000-nat.c: Ditto.
- * sun3-nat.c: Ditto.
- * sun386-nat.c: Ditto.
- * symm-nat.c: Ditto.
- * umax-xdep.c: Ditto.
- * i386v4-nat.c: Ditto. Also include inferior.h.
- * m68k-tdep.c: Ditto. Also include inferior.h.
-
-Mon Apr 12 15:57:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * inferior.h (CALL_DUMMY_STACK_ADJUST, CALL_DUMMY_STACK_ADJUST_P):
- Provide default definitions.
- * valops.c (hand_function_call): Replace #ifdef
- CALL_DUMMY_STACK_ADJUST with if (CALL_DUMMY_STACK_ADJUST_P).
-
- * gdbarch.h (SIZEOF_CALL_DUMMY_STACK_ADJUST,
- (SIZEOF_CALL_DUMMY_STACK_ADJUST_P): Define
- * gdbarch.c (struct gdbarch): Add call_dummy_stack_adjust,
- call_dummy_stack_adjust_p.
- (gdbarch_call_dummy_stack_adjust,
- set_gdbarch_call_dummy_stack_adjust,
- gdbarch_call_dummy_stack_adjust_p,
- set_gdbarch_call_dummy_stack_adjust_p): New functions.
- (default_gdbarch): Update.
-
-1999-04-09 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.c, ax-gdb.h, ax-general.c, ax.h: Remove RCS Id strings.
- They're a pain.
-
- * GDB 4.18 released.
- * Makefile.in (VERSION): Bump to 4.18.1.
-
-Thu Apr 8 16:04:34 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * inferior.h (CALL_DUMMY_P, CALL_DUMMY_WORDS,
- SIZEOF_CALL_DUMMY_WORDS): Define macros.
- (PUSH_DUMMY_FRAME, FIX_CALL_DUMMY, STORE_STRUCT_RETURN): Provide
- fatal default.
-
- * inferior.h, gdbarch.c (call_dummy_words,
- sizeof_call_dummy_words): Declare/Define variables.
- * valops.c (value_arg_coerce, find_function_addr,
- call_function_by_hand): Always define.
- (hand_function_call): Rename CALL_DUMMY version of
- call_function_by_hand. Make static. Add prototype.
- (hand_function_call): Update. Allocate space for *dummy and
- *dummy1 using alloca.
- * breakpoint.c (frame_in_dummy): Update.
-
- * gdbarch.h (CALL_DUMMY_P, CALL_DUMMY_WORDS,
- SIZEOF_CALL_DUMMY_WORDS): Define.
- * gdbarch.c (gdbarch_call_dummy_p, set_gdbarch_call_dummy_p,
- gdbarch_call_dummy_words, set_gdbarch_call_dummy_words,
- gdbarch_sizeof_call_dummy_words,
- set_gdbarch_sizeof_call_dummy_words): New functions.
- (gdbarch_alloc, verify_gdbarch, gdbarch_update, struct
- default_gdbarch): Update.
-
-1999-04-08 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * monitor.c (monitor_read_memory): If a MO_GETMEM_NEEDS_RANGE
- monitor, increase the end address by one byte.
-
-1999-04-08 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * dbug-rom.c (init_dbug_cmds): Fix strings in
- dbug_cmds.{step,clr_break,clr_all_break,fill} to send correct
- commands to the monitor.
-
-1999-04-08 Keith Seitz <keiths@cygnus.com>
-
- * m32r-stub.c (branchDestination): Undo overly ambitious
- sed script's conversion of cast from "char" to "unsigned char".
- Return offset should now be properly computed.
-
-Thu Apr 8 14:13:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * inferior.h (CALL_DUMMY_BREAKPOINT_OFFSET_P): New macro.
- Non-zero when CALL_DUMMY_BREAKPOINT_OFFSET is valid.
-
- * infcmd.c (breakpoint_auto_delete_contents): Always define.
- (run_stack_dummy): Update.
- * infrun.c (wait_for_inferior): Update
-
- * gdbarch.h (CALL_DUMMY_BREAKPOINT_OFFSET_P): New macro.
- * gdbarch.c (set_gdbarch_call_dummy_breakpoint_offset_p,
- gdbarch_call_dummy_breakpoint_offset_p): New functions.
- (struct gdbarch, gdbarch_alloc, default_gdbarch, gdbarch_update):
- Update.
-
-1999-04-07 Stan Shebs <shebs@andros.cygnus.com>
-
- * MAINTAINERS: Mark Alexander can no longer maintain
- h8300 and other embedded targets, sniff.
+Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
-1999-04-06 Stan Shebs <shebs@andros.cygnus.com>
+ * Makefile.in (wait_h): Delete macro. Update all dependencies
+ specifying gdb_wait.h instead.
- * inftarg.c (child_wait): Initialize execd_pathname.
- * target.c (debug_to_has_execd): Handle NULL execd_pathname.
+ * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
+ remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
+ remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
+ convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
+ remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
+ remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
+ remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
+ ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
+ infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
+ fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
+ or <sys/wait.h>.
- * solib.c (clear_solib): Don't call disable_breakpoints_in_shlibs,
- this breaks rerunning on sun4 native.
+ * gdb_wait.h: New file. Based on ../include/wait.h. Include
+ <sys/wait.h> or <wait.h> and then define any missing WIF macros.
-1999-04-06 Jim Blandy <jimb@zwingli.cygnus.com>
+Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
- * config/sparc/nm-linux.h: Don't redefine PT_ATTACH to use the
- deprecated PTRACE_SUNATTACH compatibility commands. The
- definitions from <sys/ptrace.h> are fine.
+ * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
+ * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
+ (d10v_stack_align): Declare.
+ * d10v-tdep.c (d10v_stack_align): Define.
-1999-04-06 Martin Hunt <hunt@cygnus.com>
+1999-08-23 J.T. Conklin <jtc@redback.com>
- * annotate.h: Declare annotate_signal_hook.
+ * top.c (remote_timeout): Change default to 2. Add comment
+ explaining history of changes to the default value.
+ * remote.c (_initialize_remote): Remove code that adds set/
+ show remotetimeout, as that's also done in top.c
- * annotate.c (annotate_signal): Add a call to
- annotate_signal_hook().
+1999-10-18 J.T. Conklin <jtc@redback.com>
-1999-04-06 Jim Blandy <jimb@zwingli.cygnus.com>
+ * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
+ Return E01 instead of P01 when 'P' command fails.
- * dwarf2read.c (dwarf_decode_lines): Don't call record_line when
- we hit a DW_LNE_end_sequence instruction.
+2000-02-05 J.T. Conklin <jtc@redback.com>
- * README: Note that GDB requires an ANSI C compiler, and explain
- how to get GCC.
+ * remote.c (putpkt_binary): Handle NAK from target stub.
- * README: Update.
+2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-1999-04-05 Stan Shebs <shebs@andros.cygnus.com>
-
- * NEWS: Add more notes about user-visible changes.
-
-Mon Apr 5 14:56:59 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * target.c (target_signal_to_string): check for signal
- number in range; otherwise if the target board returns
- a bogus signal number we might core dump (per David Taylor).
-
-1999-04-05 David Taylor <taylor@ryobi.cygnus.com>
-
- * utils.c (fputs_maybe_filtered): test value of
- pagination_enabled before paginating.
-
-1999-04-02 James Ingham <jingham@cygnus.com>
-
- * blockframe.c (get_prev_frame): Remove the redundant
- get_prev_frame_info. It is now exactly the same as
- get_prev_frame, so there is no reason to have both functions.
-
- * rs6000-tdep.c (rs6000_init_extra_frame_info):
- frame.h:
- a29k-tdep.c (init_extra_frame_info):
- config/a29k/tm-a29k.h:
- i386-tdep.c:
- Change all references to get_prev_frame_info to get_prev_frame.
-
-1999-04-02 Stan Shebs <shebs@andros.cygnus.com>
-
- * bcache.c, bcache.h, breakpoint.c, defs.h, expprint.c,
- expression.h, gdbarch.c, gdbtypes.c, gdbtypes.h, gnu-nat.c,
- gnu-nat.h, hppa-tdep.c, maint.c, monitor.c, objfiles.h, parse.c,
- remote-mips.c, remote-sds.c, remote.c, sol-thread.c, symmisc.c,
- symtab.h, target.c, top.c, typeprint.c, config/nm-gnu.h: Evaporate
- the unused MAINTENANCE_CMDS conditional.
-
-1999-04-02 James Ingham <jingham@cygnus.com>
-
- * config/arm/tm-arm.h: (EXTRACT_STRUCT_VALUE_ADDRESS): This needs
- to call extract_address, not just cast the first 4 bytes, since
- the result will be passed to value_at which expects host-byte
- order.
-
- * arm-tdep.c (arm_scan_prologue): The prologue_start address was
- directly &'ed with 0x03fffffc, rather than using
- ADDR_BITS_REMOVE. This would cause inferior function calls to
- report the stack incorrectly on return.
-
-
-1999-04-02 Keith Seitz <keiths@cygnus.com>
-
- * top.c (ui_loop_hook): Change declaration. Now returns an int.
- * win32-nat.c (child_wait): Timeout WaitForDebugEvent and call
- the ui_loop_hook if there was no debug event.
- * top.c (ui_loop_hook): Change to return an int and include
- on all non-Cygwin builds.
- * v850ice.c: Change prototype of ui_loop_hook.
- (v850ice_wait): Update call to ui_loop_hook.
- * ser-unix.c (hardwire_readchar): Enable ui_loop_hook callbacks
- for non-Cygwin builds. Check return status of ui_loop_hook and
- return a timeout if told to detach. Add more documentation.
- * ser-tcp.c (tcp_readchar): Break up timeouts into one second
- intervals and call ui_loop_hook so that other UIs can
- keep up to date. If ui_loop_hook returns non-zero, then
- return SERIAL_TIMEOUT to facilitate detaching from the
- target.
- * remote.c (remote_interrupted_already): Remove.
- (remote_interrupt_twice): Revive.
- (remote_interrupt): Call remote_stop to interrupt the target
- and install remote_interrupt_twice to take more severe
- actions if this fails.
- (remote_stop): Only attempt to stop the target. This separates
- the command line from other UIs.
- * remote-sim.c (gdb_os_poll_quit): Add a call to ui_loop_hook,
- if it is defined.
-
-1999-04-01 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Fix for cross-debugging on an AIX host from Johanna Svenningsson:
- * ax-gdb.h (enum axs_lvalue_kind): Remove trailing comma from enum.
- * ax.h (enum agent_op): Same.
- * tracepoint.h (enum actionline_type): Same.
- * config/xm-aix4.h: Add declaration for termdef.
-
-1999-03-31 Stan Shebs <shebs@andros.cygnus.com>
-
- * jv-lang.h (dynamics_objfile): Remove decl, conflicts with static
- decl in jv-lang.c.
-
- * infrun.c (follow_inferior_fork): Add ifdefs around
- SOLIB_REMOVE_INFERIOR_HOOK.
-
-Wed Mar 31 11:39:49 1999 David Taylor <taylor@ryobi.cygnus.com>
-
- * valops.c (search_struct_field): revert HP merge change
- to this function -- it causes messages to be printed about
- member class ambiguity when the compiler is happy.
- (search_struct_field_aux): delete -- added as part of HP merge
- change; with aforementioned change it is no longer called.
-
-1999-03-30 Stan Shebs <shebs@andros.cygnus.com>
-
- Make more HPUX-specific code generic.
- * infrun.c: Include top.h.
- (MAY_SWITCH_FROM_INFERIOR_PID, MAY_FOLLOW_EXEC,
- USE_THREAD_STEP_NEEDED): New native macros.
- (may_switch_from_inferior_pid, may_follow_exec,
- use_thread_step_needed): New globals.
- (follow_inferior_fork): Remove HPUXHPPA ifdef.
- (follow_exec): Ditto, also save run target and re-push instead of
- always pushing child_ops, add ifdefs around SOLIB_RESTART and
- SOLIB_CREATE_INFERIOR_HOOK.
- (wait_for_inferior): Use new globals instead of ifdefing HPUXHPPA,
- always use printf_filtered to report new threads.
- (normal_stop): Ditto.
- * target.h, target.c (find_run_target): New function.
- * config/pa/nm-hppah.h: Define new macros.
-
-1999-03-29 Stan Shebs <shebs@andros.cygnus.com>
-
- * top.h: Include setjmp.h here.
- * main.c, top.c: Don't include it here.
-
-1999-03-29 Keith Seitz <keiths@cygnus.com>
-
- * symtab.c (decode_line_1): Take out change which breaks symbols
- which include class names and methods, e.g., "Foo::bar".
-
-1999-03-26 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.tgt (i[3456]86-*-sysv4.2MP, i[3456]86-*-sysv4.2uw2*):
- Recognize both, as i[3456]86-*-sysv4.2*.
- (i[3456]86-*-sysv5*): Recognize.
-
- * infrun.c (wait_for_inferior): Remove most #if 0 segments.
-
-Fri Mar 26 17:27:27 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * blockframe.c (pc_in_call_dummy_on_stack): Fix. Had copied code
- from at_entry_point.
-
-Thu Mar 25 19:30:02 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * gdbarch.c: Include all headers.
- (struct gdbarch), gdbarch.h (CALL_DUMMY_LOCATION,
- CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET,
- CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LENGTH,
- PC_IN_CALL_DUMMY): Add ``call_dummy_location'',
- ``call_dummy_length'', ``pc_in_call_dummy'',
- ``call_dummy_start_offset'', ``call_dummy_breakpoint_offset'' to
- multi-arch framework.
-
- * inferior.h, blockframe.c (pc_in_call_dummy_before_text_end,
- pc_in_call_dummy_after_text_end, pc_in_call_dummy_on_stack,
- pc_in_call_dummy_at_entry_point): Convert PC_IN_CALL_DUMMY macro's
- into functions.
-
-Tue Mar 23 17:22:57 1999 Philippe De Muyter <phdm@macqel.be>
-
- * remote.c, parse.c: Include ctype.h.
-
-1999-03-24 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.host (mips-dec-mach3*): Use mipsm3 not mach3.
-
- Attempt to sort out SCO-related configs.
- * configure.host (i[3456]86-*-sysv4.2*): Use instead of
- i[3456]86-*-sysv4.2MP and i[3456]86-*-sysv4.2uw2*.
- (i[3456]86-*-sysv5*): Recognize.
- * configure.tgt (i[3456]86-*-sco3.2v5*, i[3456]86-*-sco3.2v4*):
- Recognize.
-
-Wed Mar 24 16:19:01 1999 Christopher Faylor <cgf@cygnus.com>
-
- * MAINTAINERS: Add DJ Delorie (dj@cygnus.com) as the djgpp
- maintainer.
-
-Wed Mar 24 21:19:57 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * target.h (enum target_signal): Do not hardwire values of MACH
- signals.
-
-1999-03-14 Ken Raeburn <raeburn@raeburn.org>
-
- * target.h (enum target_signal): Add TARGET_SIGNAL_INFO.
- * target.c (signals): Add SIGINFO description.
- (target_signal_from_host, target_signal_to_host): Translate
- SIGINFO to/from TARGET_SIGNAL_INFO.
-
-Wed Mar 24 01:01:27 1999 Andrew Cagney <cagney@sludge.cygnus.com>
-
- * rs6000-tdep.c (rs6000_software_single_step): Change SIGNAL to
- unsigned int.
-
- From Rodney Brown <rodneybrown@pmsc.com>
- * target.h (enum thread_control_capabilities), breakpoint.h (enum
- bptype), breakpoint.c (enum insertion_state_t): Strict ISO-C
- doesn't allow trailing comma in enum definition.
-
-Mon Mar 22 15:56:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * blockframe.c (inside_entry_file, inside_entry_func): Convert #if
- CALL_DUMMY_LOCATION to if.
- * valops.c (call_function_by_hand): Ditto.
- * infcmd.c (run_stack_dummy): Ditto.
- * inferior.h (CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET,
- CALL_DUMMY_BREAKPOINT_OFFSET): Provide default.
-
-1999-03-23 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * hppa-tdep.c (pa_register_look_aside): Remove CPU_HPPA_RISC_20
- check, test for presence of struct save_state_t and the ss_wide
- member directly.
- * configure.in: Remove CPU_HPPA_RISC_20 test. Add tests for
- HAVE_STRUCT_SAVE_STATE_T and HAVE_STRUCT_MEMBER_SS_WIDE.
- * acconfig.h: Add HAVE_STRUCT_SAVE_STATE_T HAVE_STRUCT_MEMBER_SS_WIDE.
- * configure, config.in: Regenerated.
-
-Mon Mar 22 13:25:13 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * infttrace.c (proc_wait): rename to ptrace_wait.
-
-1999-03-18 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * dwarf2read.c: Correctly recognize location expressions that
- designate LOC_REF_ARG arguments. Doc fixes.
- (isderef): New global. (Yuck.)
- (dwarf2_complex_location_expr): New complaint.
- (read_func_scope): Reject frame_base attributes that use the
- `deref' opcode as too complex.
- (new_symbol): If both regoff and isderef are set, and the base
- register is the frame pointer, then it's a LOC_REF_ARG argument.
- (decode_locdesc): Recognize the `deref' opcode in location
- expressions. Complain if it's not the last op in the expression.
-
- * config/fr30/tm-fr30.h (COERCE_FLOAT_TO_DOUBLE): #define this to
- be true, or else value_arg_coere won't respect the (accurate)
- information we have about whether a function is prototyped.
-
-1999-03-17 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * config/fr30/tm-fr30.h (STACK_ALIGN): Define this here, so
- calling functions by hand with odd-sized arguments doesn't munge
- the stack.
-
-1999-03-17 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in (HAVE_MULTIPLE_PROC_FDS): Don't define for Solaris
- hosts--gdb doesn't support this yet.
- * configure: Regenerated.
-
-1999-03-16 Keith Seitz <keiths@cygnus.com>
-
- * remote.c (remote_binary_checked): New file global.
- (check_binary_download): New function to check if
- stub supports binary downloading that works with
- stubs that are not eight bit clean.
- (remote_write_bytes): Check for binary download capability
- and use it if available.
- Remove references to global remote_binary_length. What a hack.
- (putpkt_binary): New function.
- (putpkt): Call putpkt_binary.
- Use xor to escape trouble characters.
- * m32r-stub.c (bin2mem): Follow escape char convention change.
-
-Tue Mar 16 01:11:33 1999 Andrew Cagney <cagney@rhino.cygnus.com>
-
- * target.h (struct target_ops), target.c (debug_to_query),
- remote.c (pack_hex_byte, remote_query): Promote char parameters to
- int. Stops compile problems with pedantic ISO-C compilers.
-
-Tue Mar 16 15:29:04 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * go32-xdep.c: Remove, no longer used by anything.
- * Makefile.in: Remove references.
-
- * jv-lang.c, jv-lang.h (java_primitive_type): Declare argument
- as int instead of char.
-
-Mon Mar 15 11:42:43 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (push_stack_item, pop_stack_item): New function.
- (d10v_push_arguments): Use.
-
- From Martin M. Hunt <hunt@cygnus.com>:
- * d10v-tdep.c (d10v_push_arguments): When arguments
- must be pushed onto the stack, they go on in
- reverse order.
-
-1999-03-16 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * symtab.c (make_symbol_overload_list): Don't try to stuff minimal
- or partial symbols into the overload list; we don't know their
- types. (Thanks to Rajiv Mirani.)
-
-1999-03-15 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * acinclude.m4 (--with-itclconfig, --with-itkconfig, --with-tixconfig):
- Fix whitespace so --help messages line up.
- * configure.in (--with-cpu): Fix capitalization for --help messages.
- * configure, aclocal.m4: Regenerated.
-
-Mon Mar 15 11:39:03 1999 Ian Carmichael <iancarm@cygnus.com>
-
- Support building gdb w/o simulator:
- * configure.in: Support --disable-sim. Check for sim directory.
- * Makefile.in (IGNORE_SIM, IGNORE_SIM_OBS): New.
- * acconfig.h (WITH_SIM): Define.
- * configure, config.in: Regenerate.
-
-Mon Mar 15 08:01:33 1999 Elena Zannoni <ezannoni@cygnus.com>
-
- Patch from Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
-
- * top.c (read_command_lines): Reset control_level to 0.
- (define_command): Don't do it here.
-
-Sun Mar 14 16:12:15 1999 Andrew Cagney <cagney@rhino.cygnus.com>
-
- * hppah-nat.c (store_inferior_registers): Delete extern
- registers[] declaration.
-
-Sun Mar 14 19:17:30 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * infrun.c (write_inferior_status_register): New function. Provide
- update access to an inf_status register buffer. Only used by HP.
- * inferior.h (write_inferior_status_register): Add prototype.
-
- * hppa-tdep.c (push_dummy_frame): Use
- write_inferior_status_register when hacking around a sleeping
- inferior. Accidently fix byte-order problem.
-
-Sun Mar 14 16:40:10 1999 Andrew Cagney <cagney@b1.cygnus.com>
+ * configure.in: Remove the addition of sol-thread.c to the
+ CONFIG_INITS list. This caused problems with init.c, because
+ sol-thread.c would be grepped twice for _initialize_* functions.
+ * configure: Ditto.
+ * Makefile.in: Add FIXME for init.c.
- * config/pa/tm-hppa.h (PUSH_DUMMY_FRAME): Fix parameter. Address
- not needed.
+2000-02-07 Jim Kingdon <kingdon@redhat.com>
-Fri Mar 12 13:11:48 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
+ Clean up compiler warnings:
+ * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
+ stack.c, valprint.c: Change variables to unsigned.
+ * bcache.c: Rearrange to avoid warnings about variables not being set.
+ * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
+ rather than declaring print_max and repeat_count_threashold
+ ourselves (incorrectly).
+ * valprint.h: Do declare repeat_count_threashold.
+ * ch-exp.c: Use default case for internal error.
+ * findvar.c: Don't omit argument type.
+ * symtab.c: Remove unused variable.
- * remote.c (remote_write_bytes): fix 'X' packet protocol so that it
- can't overwrite the end of its buffer with escaped characters.
+2000-02-04 Nick Clifton <nickc@cygnus.com>
-1999-03-12 Jim Blandy <jimb@zwingli.cygnus.com>
+ * config/arm/tm-arm.h (LOWEST_PC): Define.
- Alpha patches from Richard Henderson:
+2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- * alpha-tdep.c (alpha_skip_prologue): Recognize subq.
+ * infrun.c (resume): Make just one call to target_resume(), instead
+ of four: set up correct parameters in all the cases ahead of time,
+ and do call at the end.
- * config/alpha/tm-alpha.h (REGISTER_NAMES): No f31, but fpcr.
- (FPCR_REGNUM): New.
- (REGISTER_CONVERTIBLE): Don't convert fpcr.
- (REGISTER_VIRTUAL_TYPE): Don't make fpcr a double.
+2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- * stabsread.c (define_symbol): Only consider live range extension
- if we have an open parenthesis.
+ * config/powerpc/tm-ppc-eabi.h: Define
+ SOFUN_ADDRESS_MAYBE_MISSING.
-1999-03-11 Jim Blandy <jimb@zwingli.cygnus.com>
+2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * monitor.c (monitor_fetch_register): Print RDEBUG info correctly
- when the register name is null.
+ * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
+ frames (revisited).
-Thu Mar 11 19:33:07 1999 Stan Shebs <shebs@andros.cygnus.com>
+Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
- * infrun.c (wait_for_inferior): Change #if DECR_PC_AFTER_BREAK
- uses to expressions, remove redundant extern decls.
+ * Makefile.in (INIT_FILES): Append CONFIG_INITS
+ * configure.in (CONFIG_INIT): Initialize.
+ (links): Link srcdir/gdbtk/library to gdbtcl2.
+ * gdbtcl2: Moved to gdbtk/library.
+ ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
+ gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
+ gdbtk.h: Moved to gdbtk/generic.
+
+2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * printcmd.c (build_address_symbolic): New function. Returns all
+ the parts that are necessary to print an address in a symbolic
+ form.
+ (print_address_symbolic): Split into a printing part and an
+ information building part, build_address_symbolic().
+
+ * defs.h (build_address_symbolic): Export.
+
+2000-02-03 Jim Blandy <jimb@redhat.com>
+
+ * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
+ opcode.
+
+2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
-Thu Mar 11 18:05:11 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
+ * arm-tdep.c (arm_push_arguments): Fix passing of floating point
+ arguments on dummy frames.
- * infptrace.c (proc_wait): Rename to ptrace_wait.
- * inftarg.c (child_wait): call ptrace_wait instead of proc_wait.
- * inferior.h: Declare ptrace_wait instead of proc_wait.
+2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
-Thu Mar 11 11:46:25 1999 Andrew Cagney <cagney@amy.cygnus.com>
+ * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
+ (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
- * breakpoint.c (create_solib_load_unload_event_breakpoint,
- create_fork_vfork_event_catchpoint, tcatch_command,
- create_exception_catchpoint, break_at_finish_at_depth_command_1,
- catch_fork_command_1, ep_skip_leading_whitespace,
- break_at_finish_command_1, catch_exec_command_1,
- catch_exception_command_1, stop_command, stopin_command,
- stopat_command, ep_parse_optional_filename,
- ep_find_event_name_end, ep_parse_optional_if_clause,
- catch_fork_command_1), stack.c (show_and_print_stack_frame_stub,
- print_stack_frame_stub, print_only_stack_frame_stub,
- backtrace_command_1, backtrace_full_command, func_command),
- valprint.c (print_decimal), source.c (print_source_lines_base):
- Add prototype.
+2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- * stack.c (print_stack_frame_stub, show_and_print_stack_frame_stub,
- print_only_stack_frame_stub): Make param void*.
+ * remote.c (getpkt_sane): New function. It is the old getpkt(),
+ which now returns a timeout indication.
+ (getpkt): New function. Wrapper for getpkt_sane(), so that return
+ value can still be ignored.
-Wed Mar 10 19:33:28 1999 Geoffrey Noer <noer@cygnus.com>
+Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
- * win32-nat.c: If old Cygwin Win32 API headers aren't being used,
- define some gdb-specific defines that shouldn't have been in the
- global headers.
+ * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
+ UI_OUT.
-Wed Mar 10 21:20:25 1999 Andrew Cagney <cagney@b1.cygnus.com>
+Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
- * findvar.c (registers, register_valid): Replace array with pointer.
- (build_findvar): New function. Allocate space for REGISTERS and
- REGISTER_VALID.
- (_initialize_findvar): Call build_findvar.
- (_initialize_findvar): Register REGISTERS and REGISTER_VALID as
- arch dependant.
+ * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
+ ``struct gdb_file'' to ``struct ui_file''. Delete typedef
+ GDB_FILE.
- * inferior.h (registers, register_valid): Replace array with
- pointer.
-
- * inferior.h (struct inferior_status): Move definition from here.
-
- * infrun.c (struct inferior_status): To here.
- (struct inferior_status): Change ``stop_registers'' and
- ``registers'' to pointers.
- (xmalloc_inferior_status, free_inferior_status): New functions.
- (restore_inferior_status): Call free_inferior_status.
- (save_inferior_status): Call xmalloc_inferior_status.
- (discard_inferior_status): New function, discard inf_status
- buffer. Call free_inferior_status.
-
- * inferior.h (stop_registers): Replace array with pointer.
- * infrun.c (stop_registers): Update.
- (build_infrun): Initialize stop_registers.
- (_initialize_infrun): Call build_infrun.
- (_initialize_infrun): Register ``stop_registers'' as arch dependant.
-
-Wed Mar 10 14:50:42 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * alpha-tdep.c (alpha_linux_sigtramp_offset): Only compile when
- LINUXALPHA target. Hack.
-
- * infrun.c (set_follow_fork_mode_command): Make static. Add
- prototype.
- * tracepoint.c (add_register): Ditto.
- * valprint.c (strcat_longest): Comment out. Does not appear to be
- used.
- * valops.c (find_method_list): Make static. Add prototype.
- * thread.c (target_find_new_threads): Make static. Add prototype.
- * stack.c (stack_publish_stopped_with_no_frame,
- select_and_maybe_print_frame): Comment out. Does not appear to be
- used.
- (current_frame_command): Add prototype.
- * breakpoint.c (break_at_finish_command,
- break_at_finish_at_depth_command, tbreak_at_finish_command): Make
- static. Add prototype.
- * findvar.c (read_relative_register_raw_bytes_for_frame): Ditto.
-
-Wed Mar 10 23:38:54 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * corefile.c (registers): Delete redundant variable declaration.
- * inferior.h (run_stack_dummy): Change array argument to pointer.
- * infcmd.c (run_stack_dummy): Update.
- * value.h (value_being_returned): Change RETBUF to a pointer.
- * values.c (value_being_returned): Update.
-
-Wed Mar 10 11:08:16 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * source.c (list_command): GCC suggested explicit braces to avoid
- ambiguous `else'.
-
- * jv-typeprint.c: Include "c-lang.h".
- * Makefile.in (jv-typeprint.o): Add dependency.
- * jv-valprint.c: Include "gdbcore.h", "annotate.h".
- * Makefile.in (jv-valprint.o): Add dependencies.
- * objfiles.c: Include "breakpoint.h".
- * Makefile.in (objfiles.o): Add dependency.
- * main.c: Include <unistd.h>.
- * parse.c: Include <ctype.h>.
- * remote.c: Include <ctype.h>.
- * ser-tcp.c: Include <unistd.h>.
- * ax-general.c: Include "value.h".
- * Makefile.in (ax-general.o): Add dependency.
-
- * alpha-tdep.c (alpha_push_arguments): Make ``i'' an int instead
- of a register.
- * frame.h (show_and_print_stack_frame): Add function prototype.
- * language.h (language_enum): Add function prototype.
- * value.h (find_overload_match): Add function prototype.
-
- * defs.h, utils.c (subset_compare): Rename subsetCompare. Add
- prototype.
- * stack.c (backtrace_command): Update.
-
-Wed Mar 10 13:58:36 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * configure.in (AC_CHECK_HEADERS): Check for <sys/select.h>
- * configure, config.in: Re-generate.
- * inflow.c: Conditionally include <sys/select.h>.
-
-Wed Mar 10 13:44:38 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * frame.h (struct dummy_frame): Move from here.
- * blockframe.c (struct dummy_frame): To here.
-
- * blockframe.c (struct dummy_frame): Replace ``regs'' with pointer
- ``registers''.
- (generic_pop_dummy_frame): Free it.
- (generic_push_dummy_frame): Allocate dummy frame register buffer.
-
-Wed Mar 10 11:08:16 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * thread.c (_initialize_thread): Delete redundant ``extern struct
- cmd_list_element *cmdlist''.
- * printcmd.c (print_command_1): Ditto for ``objectprint'';
-
-1999-03-09 Stan Shebs <shebs@andros.cygnus.com>
-
- * MAINTAINERS: New file, list of maintainers and areas they
- maintain.
-
-1999-03-09 Rodney Brown <RodneyBrown@pmsc.com>
-
- Get working on UnixWare 2.1.1.
- * acconfig.h: Update for defines for procfs.c.
- * configure.in: Identify defines for procfs.c.
- * configure.host: i386-*-sysv4.2uw2* => i386v42mp
- * configure.tgt: i386-*-sysv4.2uw2* => i386v42mp
- * configure, config.in: Regenerate.
- * procfs.c: Rename HAVE_NO_PRRUN_T to HAVE_PRRUN_T (autoconf
- standard), wrap UNIXWARE difference in THE_PR_LWP macro for
- legibility.
- * config/i386/tm-i386v42mp.h: Remove HAVE_PSTATUS_T,
- HAVE_NO_PRRUN_T; now set by configure.
-
-Tue Mar 9 16:29:24 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * i386-tdep.c (gdb_print_insn_i386): Abort when disassembly_flavor
- undefined..
-
- * fr30-tdep.c (_initialize_fr30_tdep): Add prototype. Fix
- coding style.
-
- * target.c (debug_to_enable_exception_callback,
- debug_to_get_current_exception_event): Return result of call to
- debug_target().
-
-1999-03-09 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Another HURD fix from Mark Kettenis:
- * gnu-nat.c: Include <string.h>. Remove declaration of strerror.
- Include <bits/waitflags.h> instead of <waitflags.h> and define
- _SYS_WAIT_H to prevent the warning that we should not include it.
- (gnu_create_inferior): Change return type of attach_to_child to
- void. Do not return INFERIOR_PID.
- (gnu_pid_to_exec_file): Change return type to char *.
- Return NULL.
-
- Fix for the HURD from Mark Kettenis:
- * configure.in: Add AC_PROG_AWK. Needed by the machine-dependent
- makefile fragments for the Hurd.
- * Makefile.in (AWK): Add. Set by configure.
- * configure: Regenerated.
-
-1999-03-08 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * infttrace.c (hppa_get_process_events): Removed. Function only
- usable on HPUX 10 and above. It is not called by any other part
- of GDB.
- * hppah-nat.c (hppa_get_process_events): Ditto.
- (child_pid_to_exec_file): Only call ptrace with
- PT_GET_PROCESS_PATHNAME if that symbol has been defined.
- * config/pa/nm-hppah.h: Don't set up prototypes et al for
- hppa_get_process_events.
-
- * config/pa/hppahpux.mh (TERM_LIB): Do not initialize, let autoconf
- determine best library automatically.
- * config/pa/hpux1020.mh: Ditto.
- * config/pa/hpux1100.mh: Ditto.
- * configure.in (TERM_LIB): Also check for libHcurses.
- * configure: Regenerated.
+ * Makefile.in: Update.
-Thu Mar 4 17:16:04 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
+ * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
+ c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
+ ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
+ cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
+ expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
+ frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
+ gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
+ jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
+ m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
+ printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
+ remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
+ ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
+ serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
+ target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
+ utils.c, v850ice.c, valprint.c, valprint.h, value.h,
+ config/pa/tm-hppa.h: Update.
+ * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
- * m32r-stub.c: add support for crc "Compare" command.
+2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
-1999-03-04 Jim Blandy <jimb@zwingli.cygnus.com>
+ * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
+ config/i386/i386dgux.mh, config/i386/i386sol2.mh,
+ config/i386/i386v4.mh, config/i386/i386v42mp.mh,
+ config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
+ config/m88k/delta88v4.mh, config/mips/irix4.mh,
+ config/mips/irix5.mh, config/mips/mipsv4.mh,
+ config/powerpc/solaris.mh (NATDEPFILES): Change references to
+ proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
+ proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
- * fr30-tdep.c (fr30_store_return_value): Allocate zeroes
- dynamically, to save BSS space, and to remove assumptions about
- the size of the largest value we'll return.
+Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
- * config/fr30/tm-fr30.h (fr30_store_return_value): Use PARAMS in
- prototype.
+ * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
-Thu Mar 4 08:37:35 1999 Andrew Cagney <cagney@b1.cygnus.com>
+ * main.c (captured_main): Only use the legacy tui_file code when
+ linking in older code such as the TUI.
- * sh3-rom.c (sh3_supply_register, sh3_supply_register),
- mips-tdep.c (mips_push_arguments), m32r-rom.c
- (m32r_upload_command), m32r-tdep.c (decode_prologue), monitor.c
- (longlong_hexchars), tracepoint.c (validate_actionline,
- read_actions), mdebugread.c
- (parse_symbol), jv-typeprint.c
- (java_type_print_base, java_type_print_base), mdebugread.c
- (parse_symbol), top.c (source_command), utils.c
- (floatformat_to_doublest): GCC suggest explicit braces to avoid
- ambiguous `else'.
+ * gdb-file.h, gdb-file.c: New files.
+ * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
+ null_file_isatty, null_file_rewind, null_file_put,
+ null_file_flush, null_file_write, null_file_fputs,
+ null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
+ gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
+ set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
+ set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
+ set_gdb_file_data, struct accumulated_gdb_file,
+ do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
+ mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
+ mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
+ stdio_file_delete, stdio_file_flush, stdio_file_write,
+ stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
+ Moved to gdb-file.h and gdb-file.c.
+ * utils.c (enum streamtype, struct tui_stream, tui_file_new,
+ tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
+ tui_file_rewind, tui_file_put, tui_file_fputs,
+ tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
+ fputs_unfiltered_hook):
+ Moved to tui/tui-file.c and tui/tui-file.h.
- * tracepoint.c (map_args_over_tracepoints, trace_actions_command),
- m32r-rom.c (m32r_supply_register), win32-nat.c
- (handle_output_debug_string, child_continue), i960-tdep.c
- (pop_frame), m32r-rom.c (m32r_upload_command): GCC suggested
- parentheses around assignment used as truth value.
+ * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
+ (tui-file.o, gdb-file.o): Add dependencies.
+ (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
+ * main.c: #include tui/tui-file.h.
- * remote-sds.c (sds_wait), monitor.c (monitor_fetch_register),
- ser-e7kpc.c, (dosasync_write), arc-tdep.c (arc_get_frame_setup):
- GCC suggested parentheses around operands.
+2000-01-28 Fred Fish <fnf@cygnus.com>
- * c-typeprint.c (c_type_print_base): GCC suggested enclosing
- "while" expression in paren.
+ * findvar.c (value_from_register): Special case handling of D10V
+ pointer values fetched from registers.
-Wed Mar 3 18:14:33 1999 Andrew Cagney <cagney@chook.cygnus.com>
+2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * sol-thread.c (save_inferior_pid): Cast the saved pid to void*.
- (restore_inferior_pid): Takes void* as required by make_cleanup.
- Casts pid back to an int.
+ * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
+ support for new style thumb prologues.
- * procfs.c (make_cleanup_close_proc_file,
- close_proc_file_cleanup): Create a proc_file cleanup.
- (info_proc): Use.
+2000-01-28 Nick Clifton <nickc@redhat.com>
- * defs.h (make_cleanup_freeargv): Helper function. Establish
- cleanup using freeargv. Can not just typecast/pass freeargv as it
- violates ISO-C.
- * utils.c (do_freeargv): Helper.
- (make_cleanup_freeargv): New function.
+ * arm-tdep.c: Remove extraneous dash at start of strings
+ introduced in previous delta.
- * symmisc.c (maintenance_print_symbols,
- maintenance_print_psymbols, maintenance_print_msymbols), symfile.c
- (symbol_file_command), stack.c (backtrace_command), remote-sim.c
- (gdbsim_create_inferior, gdbsim_open), remote-mips.c
- (common_open), procfs.c (info_proc), infrun.c (handle_command,
- xdb_handle_command), exec.c (exec_file_attach): Call
- make_cleanup_freeargv.
+2000-01-27 Nick Clifton <nickc@redhat.com>
-1999-03-03 James Ingham <jingham@cygnus.com>
+ * arm-tdep.c: Replace uses of arm_toggle_renames() with
+ parse_arm_disassembler_option().
- * i386-tdep.c (_initialize_i386_tdep): Set the inital value for
- disassembly flavor at startup, rather than hardcoding it.
+2000-01-27 Jim Blandy <jimb@cygnus.com>
-1999-03-03 Jim Blandy <jimb@zwingli.cygnus.com>
+ * symtab.c (decode_line_1): Don't let commas that are within
+ quotes or parenthesis terminate the line spec. Don't use pp when
+ removing the final double quote of a double-quoted string. Don't
+ forget to skip the opening double quote. I have no clue whether
+ this change is correct; probably we've just moved this function
+ from one buggy place to another buggy place, and never came within
+ an outhouse whiff of correctness.
+ (find_toplevel_char): New function.
+
+2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
- Put return values in the right place.
- * fr30-tdep.c (fr30_store_return_value): New function.
- * config/fr30/tm-fr30.h (STORE_RETURN_VALUE): Call
- fr30_store_return_value.
+ * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
+ passing the pointer to a thumb function as an argument.
-Wed Mar 3 18:10:55 1999 Andrew Cagney <cagney@chook.cygnus.com>
+2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
+ are reinserted for another run.
- * gdbtypes.c (virtual_base_list_aux): Return void. Add prototype.
+2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * breakpoint.c (map_catch_names): Comment out unused function.
+ * cli-out.c (cli_filed_string): Test for NULL string.
-1999-03-02 Jason Molenda (jsm@bugshack.cygnus.com)
+2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * hppa-tdep.c (pa_register_look_aside): Only refer to save_state_t
- structure on PA 2.0 systems.
+ * infcmd.c (run_stack_dummy): Account for a random signal stopping
+ the inferior as well as breakpoints being hit while performing an
+ inferior function call.
+ * valops.c (hand_function_call): Ditto.
-1999-03-02 Stan Shebs <shebs@andros.cygnus.com>
+2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- From Gary Thomas <gthomas@cygnus.co.uk>:
- * arm-tdep.c (ARM_LE_BREAKPOINT, ARM_BE_BREAKPOINT,
- THUMB_LE_BREAKPOINT, THUMB_BE_BREAKPOINT): Use illegal instruction
- instead of SWI 24.
- * config/arm/tm-arm.h (CALL_DUMMY): Ditto.
- (IN_SIGTRAMP): Define.
+ From Mark Kettenis <kettenis@gnu.org>
-1999-03-02 Nick Clifton <nickc@cygnus.com>
+ * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
+ i386_REGS_SEGS_STATE.
+ (HAVE_I387_REGS): Define.
+ (FLOAT_INFO): Remove.
+ * i386gnu-nat.c: Almost completely rewritten to use new i386
+ register layout and `float info' implementation.
+ * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
+ Move prototypes from here.
+ * gnu-nat.h: To here.
- * findvar.c (store_address): Delete incorrect big endian
- code.
+2000-01-24 Kevin Buettner <kevinb@redhat.com>
-Tue Mar 2 18:02:42 1999 Andrew Cagney <cagney@chook>
+ * utils.c (get_field, put_field): Fix buffer underruns and
+ overruns. Also, handle case where total_len is not evenly
+ divisible by 8.
+ (getfield): Make sure zeroing of unwanted bits occurs even
+ when bit field to extract does not straddle two or more
+ bytes.
- * configure.in (gdb_cv_os_cygwin): Compat. Continue to reconize
- __CYGWIN32__.
+2000-01-23 Christopher Faylor <cgf@cygnus.com>
-1999-03-01 Jason Molenda (jsm@bugshack.cygnus.com)
+ * defs.h: Add gdb_thread_select declaration.
- * configure.in: Move setting of gdb_cv_os_cygwin to before
- setting of TERM_LIB. Check for __CYGWIN__ instead of __CYGWIN32__.
- * configure: Regenerated.
-
-1999-03-01 DJ Delorie <dj@cygnus.com>
-
- * configure.in: Change -cygwin32* to -cygwin*.
- * configure: Ditto.
-
-1999-02-25 Stan Shebs <shebs@andros.cygnus.com>
-
- * breakpoint.c (SOLIB_LOADED_LIBRARY_PATHNAME,
- SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_CREATE_CATCH_LOAD_HOOK,
- SOLIB_CREATE_CATCH_UNLOAD_HOOK): Supply default definitions.
- * infrun.c (SOLIB_IN_DYNAMIC_LINKER): Ditto.
-
-1999-02-25 Keith Seitz <keiths@cygnus.com>
-
- * corelow.c (core_close): Clear out solib state before
- closing the bfd associated with the core file.
- * solib.c (clear_solib): Mention that clear_solib requires
- an open BFD in order for disable_breakpoints_in_shlibs to
- determine whether breakpoints live in shared libraries.
+2000-01-23 Kevin Buettner <kevinb@redhat.com>
-1999-02-24 Jason Molenda (jsm@bugshack.cygnus.com)
+ * linux-thread.c (_initialize_linuxthreads): Make sure that
+ linuxthreads_block_mask does not block SIGCHLD.
- * configure.in: Set CPU_HPPA_RISC_20 if the host CPU is a PA 2.0
- processor.
- * acconfig.h: Add CPU_HPPA_RISC_20
- * config.in, configure: Regenerated.
- * hppa-tdep.c (pa_register_look_aside): Only refer to new
- structure elements if we are on a PA2.0 system.
- * defs.h: Include limits.h.
+2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
-Tue Feb 23 14:37:08 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
+ * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
+ text so that new lines work properly.
- * infrun.c (wait_for_inferior): Check scheduler_locking state
- before resuming after a thread-specific breakpoint.
+2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-1999-02-23 Jim Blandy <jimb@zwingli.cygnus.com>
+ * proc-utils.h: New file. Export functions from proc-*.c.
- * aclocal.m4, config.in, configure: Regenerated with latest
- autotools.
+ * proc_api.c: Rename to:
+ * proc-api.c: New file. Add include of proc-utils.h.
-Mon Feb 22 12:32:19 1999 Per Bothner <bothner@cygnus.com>
+ * proc_events.c: Rename to:
+ * proc-events.c: New file.
- * jv-valprint.c (java_val_print): Restore line that somehow got lost.
+ * proc_flags.c: Rename to:
+ * proc-flags.c: New file.
- * jv-valprint.c (java_print_value_fields): Check for NULL type.
+ * proc_why.c: Rename to:
+ * proc-why.c: New file. Add include of proc-utils.h.
-1999-02-21 Jim Blandy <jimb@zwingli.cygnus.com>
+ * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
+ ctype.h, proc-utils.h.
+ (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
+ (open_procinfo_files): Conditionalize local variable tmp, to avoid
+ compiler warnings.
+ (proc_iterate_over_mappings): Conditionalize local vars mapfd and
+ pathname.
+ (procfs_wait): Adjust format in some printf_filetered calls to
+ avoid compiler warnings.
+ (make_signal_thread_runnable): Ifdef 0. The calls to this function
+ are also ifdef'd 0 .
+ (procfs_resume): Add parentheses around '&&' operation.
+ (procfs_set_exec_trap): Remove unused variable.
+ (info_proc_cmd): Add braces to avoid ambiguous else clause.
- * tm-h8500.h, i386lynx-nat.c: Removed. These files are long
- dead; it seems that they only appeared due to some CVS weirdness.
- If they appear again, we may need to distribute garlic and holy
- water.
+ * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
+ proc-why.o): Update dependencies.
-1999-02-19 Jason Molenda (jsm@bugshack.cygnus.com)
+ * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
+ proc-*.o.
- * configure.in (TERM_LIB): Move checking for TERM_LIB, substituting.
- * configure: Regenerated.
-
-1999-02-19 Robert Hoehne (robert.hoehne@gmx.net)
-
- * configure.host (i[3456]86-*-msdosdjgpp*): New host.
- * configure.tgt (i[3456]86-*-msdosdjgpp*): New target.
- * go32-nat.c: New file, native DJGPP support.
- * config/i386/go32.mh: Rewrite for DJGPP (go32) host.
- * config/i386/go32.mt: New file, DJGPP (go32) target.
- * config/i386/nm-go32.h: New file.
- * config/i386/tm-go32.h: New file.
- * config/i386/xm-go32.h: Rewritten for current DJGPP.
-
-1999-02-18 Jason Molenda (jsm@bugshack.cygnus.com)
+2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
- * reply_mig_hack.awk, config/nm-gnu.h, config/alpha/nm-linux.h
- config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h
- config/i386/nm-i386sco5.h, config/i386/tm-fbsd.h, config/i386/tm-i386.h
- config/powerpc/nm-aix.h, config/powerpc/tm-macos.h
- config/powerpc/tm-ppc-aix.h, config/powerpc/xm-aix.h
- config/rs6000/tm-rs6000-aix4.h, testsuite/gdb.chill/tests1.ch
- testsuite/gdb.chill/tests2.ch, testsuite/gdb.chill/tests2.exp:
- Update FSF address in copyright notices.
-
-1999-02-18 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Quote "$GCC" correctly.
+ * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
+ Fix from Robert Lipe <robertl@sco.com>.
* configure: Regenerated.
-1999-02-18 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * dbxread.c (elfstab_build_psymtabs): Don't assume that there's a
- section named ".text", which has all the code in it. Instead, look
- at all the sections in the file with the `code' flag set.
- (find_text_range): New function, that does all the work.
-
-Thu Feb 18 17:50:45 1999 Andrew Cagney <cagney@b1.cygnus.com>
+2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- * mips-tdep.c (FP_REGISTER_DOUBLE): Conditionally define.
+ * stack.c (print_frame_info_base): Break up into the frame info
+ (location) printing part and the rest (source line printing).
+ (print_frame): New function. Take care of printing the location
+ information.
+ Update copyright.
-Fri Jan 29 16:51:11 1999 Andrew Cagney <cagney@chook.cygnus.com>
-
- * mips-tdep.c (return_value_location): New function. Merge/rewrite
- of return-value code in mips_extract_return_value,
- mips_store_return_value. Stop buffer overflow when 64 bit value
- in 32 bit registers. Extract 64bit float from 32 bit register
- pair of correct order.
- (mips_extract_return_value, mips_store_return_value): Call
- return_value_location. For store, ensure that remainder of
- register is zero.
-
-Wed Feb 17 10:10:27 1999 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * gdbtypes.h (get_discrete_bounds): Remove duplicate decl.
-
- * jv-typeprint.c (java_type_print_base): Change fputs => fputs_filtered.
+ * infrun.c (normal_stop): Use enum values rather than integers for the
+ source_flag to be passed to show_and_print_stack_frame().
+ Update copyright.
-Mon Jan 25 18:30:57 1999 Per Bothner <bothner@cygnus.com>
-
- * jv-lang.h (JAVA_OBJECT_SIZE): Change from hard-wired constant.
- (java_primitive_type_from_name, get_java_object_header_size): Declare.
- * jv-lang.c (java_class_from_object): Use get_java_object_type.
- * jv-lang.c: Update Class field names: dtable->vtable,
- msize->method_count, nfields->field_count, bfsize->size_in_bytes,
- nmethods->method_count.
- (type_from_class): Demangle array type names.
- (java_link_class_type): Array type names are now demangled.
- (get_java_object_type): If not defined yet, try looking it up.
- (get_java_object_header_size): New function.
- (java_primitive_type_from_name): New function.
- (java_demangled_signature_length, java_demangled_signature_copy): New.
- (java_demangle_type_signature): Re-implement using above functions.
- (evaluate_subexp_java): For UNOP_IND, call evaluate_subexp_java
- to evaluate subexp (not evaluate_subexp_standard).
- For BINOP_SUBSCRIPT update for new array type naming scheme.
- * jv-valprint.c (java_value_print): Use java_class_from_object.
- Update array printing to new array type naming convention.
- (java_val_print): Doing check_typedef when printing a pointer is
- is a waste of effort. Also, handle TYPE_CODE_INT, to make sure
- Java bytes as not printed as C chars.
-
-Fri Jan 8 16:58:22 1999 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * blockframe.c (find_pc_sect_partial_function): Search full symtabs as
- a last ditch effort (after the partial & minimal symtabs).
- * defs.h utils.c: Fixup prototypes for vprintf_filtered,
- vfprintf_filtered, vfprintf_unfiltered and vprintf_unfiltered to return
- ints to match their standard equivalents.
- * defs.h symtab.c top.c: Create skip_prologue_hook to allow Java to
- control the prologue skipping process.
- * jv-typeprint.c (java_type_print_base): Remove extern for
- jv_class_demangle, add new arg for objfile (NULL).
- * symtab.h: Remove struct sourcevector and struct source. Definately
- not needed.
- * values.c (value_virtual_fn_field): Fixes code to handle new vtable
- debug info format. Patch from marka.
+ * frame.h (print_what): New enum for 'source' argument to
+ print_frame_info_base(). Use this instead of obscure numbers.
+ Update copyright.
-Wed Dec 16 23:11:25 1998 Stu Grossman <grossman@fencer.cygnus.com>
-
- * jv-lang.c (java_class_from_object java_class_is_primitive
- is_object_type): Change dtable to vtable.
- * (java_primitive_type): Change arg to type char.
- * (_initialize_java_language): Make java_char_type be unsigned.
- * jv-lang.h: Fixup prototypes.
-
-Mon Dec 7 19:02:15 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * jv-valprint.c (java_value_print): Fix printing of values where
- run time type != compile time type.
-
-Fri Dec 4 15:23:38 1998 Stu Grossman <grossman@fencer.cygnus.com>
-
- * Makefile.in: Whack out m2-typeprint.c.
- * c-typeprint.c (c_type_print_varspec_suffix) typeprint.h: Make this
- global. It's needed by Java.
- * (c_type_print_base): Whack prefix off of qualified method names
- (names with name spaces).
- * gdbtypes.h (struct cplus_struct_type): Add bits for Java attributes.
- Shrink voffset
- to 16 bits to compensate for added bits above (hopefully this is still
- enough).
- * Add new accessor macros (TYPE_FND_FIELD_PUBLIC, ...) for all new
- attribute bits.
- * jv-typeprint.c (java_type_print_base): Fix printing of method
- attributes. Handle JVM style manglings.
- * (java_print_type): Enable code type print varspec_suffix to allow
- array indices to print out.
- * jv-valprint.c (java_val_print): Minor formatting.
- * m2-lang.c (m2_language_d): Change m2_print_type to c_print_type.
- * stabsread.c (read_member_functions): Save public and static attributes.
-
-Wed Feb 17 15:32:57 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * breakpoint.c (watch_command_1): Reformat comment.
-
- * c-typeprint.c (c_type_print_base): Reformat comments.
-
-1999-02-17 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * Makefile.in (VERSION): Bump version to 4.17.2.
-
-Tue Feb 16 15:48:20 1999 Edith Epstein <eepstein@sophia.cygnus.com>
-
- * config/pa/nm-hppah.h: Added prototype declarations for
- hppa_enable_page_protection_events and
- hppa_disable_page_protection_events.
-
- * inftarg.c (child_wait): Fixed code that checks whether
- or not the target program has done a fork/vfork.
- related_pid does not have a value unless the target
- program has forked/vforked.
-
- * infttrace.c (hppa_insert_hw_watchpoint): Make sure that
- function always returns a value.
- (hppa_remove_hw_watchpoint): Make sure that function always
- returns a value.
-
-Tue Feb 16 06:31:58 1999 Keith Seitz <keiths@cygnus.com>
-
- * config/powerpc/tm-ppc-eabi.h: Do not define PC_IN_CALL_DUMMY,
- let the generic call dummy infrastructure do it.
-
-Sun Feb 14 18:21:08 1999 Mark Alexander <marka@cygnus.com>
-
- * config/sh/tm-sh.h (BELIEVE_PCC_PROMOTION): Define, so that
- coffread.c will correctly handle char or short function parameters.
+Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
-1999-02-11 Jason Molenda (jsm@bugshack.cygnus.com)
+ * event-top.c (stdin_event_handler): call quit_command rather than
+ exit -- run cleanups, give target code a chance to say goodbye to
+ the target. Fixes bug where the inferior processes were left
+ around on Solaris (and probably elsewhere) by the testsuite.
- * configure, aclocal.m4: Regenerate with correct version of aclocal.
+2000-01-14 Mark Salter <msalter@cygnus.com>
-1999-02-10 Syd Polk <spolk@cygnus.com>
+ * v850-tdep.c (v850_target_architecture_hook): Setup correct
+ machine id for disassembly.
- * acinclude.m4: Fix for new location of itclConfig.sh and itkConfig.sh.
- * aclocal.m4: Regnerate.
- * configure: Regenerate.
-
-1999-02-10 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * demangle.c: Fix comments to mention "set demangle-style"
- instead of "set demangle".
- Run through indent to fix minor indenting problems.
-
-Wed Feb 10 17:53:09 1999 Bob Manson <manson@charmed.cygnus.com>
+2000-01-13 Jim Blandy <jimb@cygnus.com>
- * i386-tdep.c (gdb_print_insn_i386): Add missing returns.
+ * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
+ convert_to_regset, when regno indicates a specific register.
-Wed Feb 10 13:17:21 1999 Stan Shebs <shebs@andros.cygnus.com>
+Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
- Declare Gould configuration obsolete:
- * configure.host, configure.tgt: Comment out Gould configs.
- * Makefile.in: Comment out Gould-related actions.
- * gould-xdep.c, gould-tdep.c, config/gould/*: Comment out.
- * NEWS: Mention obsolete status.
+ * uw-thread.c: Document libthread.so debugging interface. Minor
+ comment and formatting tweaks.
+ (DEBUG): #define as 0 instead of 1.
+ (CALL_BASE): Include function name in error msg.
+ (libthread_stub): Adjust inferior_pid after thread exit.
+ (uw_thread_create_inferior): Deactivate uw_thread_ops before
+ asking procfs_ops to create inferior.
+ (libthread_init): Don't return nonlocally on error.
-1999-02-09 DJ Delorie <dj@cygnus.com>
+2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * sparcl-tdep.c: UDP download works in cygwin
-
-1999-02-08 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * gnu-regex.c: Check ENABLE_NLS instead of HAVE_LIBINTL_H.
- * configure.in: Don't check for libintl.h.
- * configure, config.in: Regenerated.
-
-Mon Feb 8 18:10:50 1999 Stan Shebs <shebs@andros.cygnus.com>
+ * rdi-share/ardi.c (negotiate_params): Fix initialization of static
+ variable.
- * NEWS: Mention new X packet and PowerPC variant support.
+2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
-1999-02-08 Nick Clifton <nickc@cygnus.com>
+ * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
+ both sides are on the same state.
- * configure.host: Add support for StrongARM host.
- * configure.tgt: Add support for StrongARM target.
+2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
-Mon Feb 8 12:05:05 1999 David Taylor <taylor@texas.cygnus.com>
+ * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
+ 115200 (minor syntax mistake).
- * dsrec.c (make_srec): Cast targ_addr to int in call to sprintf
- otherwise on big endian machine with a bfd_vma of 64 bits,
- *everything* gets loaded at location 0.
+2000-01-12 Jim Blandy <jimb@cygnus.com>
-Mon Feb 7 10:05:43 1999 Frank Ch. Eigler <fche@cygnus.com>
+ * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
+ this here, to go along with the definitions of PIDGET and TIDGET.
- * infrun.c (wait_for_inferior): Allow SIGTRAP to be "pass"ed
- to target program.
+2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-Fri Feb 5 16:46:14 1999 Stan Shebs <shebs@andros.cygnus.com>
+ * thread.c (do_captured_thread_select): New function. Switch
+ current thread, safely from within catch_errors().
+ (gdb_thread_select): New function. Switch threads safely.
+ (thread_command): Use gdb_thread_select().
+ Include ui-out.h.
+ (do_captured_list_thread_ids): New function.
+ (gdb_list_thread_ids): New function.
- * NEWS: Add mentions of various new things.
+ * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
-Thu Feb 4 00:19:14 1999 Christopher Faylor <cgf@cygnus.com>
+2000-01-11 Christopher Faylor <cgf@cygnus.com>
- * configure.in: Move termcap determination later in the
- file to catch setting of cygwin flag.
+ * configure.in: Avoid linking -limagehlp unless it's a native build.
* configure: Regenerate.
+ * thread.cc (add_thread): Clear private data pointer here or suffer
+ strange behavior when it is checked for NULL later.
-Wed Feb 3 14:16:38 1999 Christopher Faylor <cgf@cygnus.com>
+2000-01-09 Christopher Faylor <cgf@cygnus.com>
- * config/i386/cygwin.mh: Move TERMCAP test code to configure.in.
- * configure.in: Treat libtermcap.a detection as a special case
- when hosting on cygwin.
+ * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
+ * configure.in: Add an additional library to cygwin link.
* configure: Regenerate.
-1999-02-03 Keith Seitz <keiths@cygnus.com>
-
- * remote.c (remote_binary_download, remote_binary_length): New
- static globals for dealing with binary transmissions.
- (remote_write_bytes): Add support for binary downloads
- by shadowing the "M" packet with a new "X" packet. This
- defaults to ON; if the stub does not understand this, it
- will fall back to using "M".
- (putpkt): Add support for binary downloading.
- * monitor.c (monitor_expect): The mon2000 monitor
- on the MSA2000 will also emit random DC1/DC3 chars.
- * m32r-stub.c: Change all char's to unsigned char's
- to support binary downloading.
- (handle_exception): Add support for binary downloading
- via a new "X" packet.
- (getpacket): Do NOT strip eighth bit of incoming chars.
- Watch out for escaped characters in the incoming stream.
- (putpacket): Do NOT strip eighth bit of incoming chars.
- (bin2mem): New function to write binary data directly to
- memory.
- * m32r-rom.c: Add new "mon2000" target.
-
-Tue Feb 2 18:40:29 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * hp-psymtab-read.c (hpread_build_psymtabs): Coerce first arg
- passed to make_cleanup to the correct type.
- (hpread_quick_traverse): Change fifth arg to call to
- hpread_end_psymtab to be 0.
- Compare CURR_MODULE_END to 0 rather than NULL.
- Get rid of ifdef'ed out code.
- (scan_procs): Get rid of ifdef'ed out code.
-
- * somread.c (som_symfile_read): Coerce first argument passed to
- make_cleanup to the correct type.
-
-Tue Feb 2 17:36:29 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * hp-psymtab-read.c (do_pxdb): New function. Check whether the
- file needs to be processed by pxdb (an HP debug info massaging
- tool), if so call it.
- (hpread_build_psymtabs): Initialize scan_start to 0 and
- simplify flow of control.
-
- * somread.c (som_symfile_read): Add call to do_pxdb (),
- in hp-psymtab-read.c.
-
- * symfile.c (symbol_file_add): Remove ifdef'ed out HPUX specific
- code.
- (symfile_bfd_open): Remove HPUXHPPA ifdef'ed code. Code is now
- in hp-psymtab-read.c.
-
-1999-02-02 Martin Hunt <hunt@cygnus.com>
-
- * printcmd.c (print_scalar_formatted): Use strcat to concat all
- the output together before calling fprintf_filtered().
-
-1999-02-01 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Require autoconf 2.13.
- (AM_EXEEXT): Replace with new AC_EXEEXT.
- * acinclude.m4: Move itcl header macros from aclocal.m4 to here.
- * aclocal.m4: Regenerated.
- * configure: Regenerated.
-
-1999-02-01 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Allow PPC users to select which PPC/RS6000 variant they're
- debugging at run-time. At the moment, the only thing this affects
- is the set of registers visible.
- * config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
- to the function rs6000_register_name.
- (rs6000_register_name): Include extern decl.
- (NUM_REGS): Bump to 183. What's the right way to do this?
- (FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
- FIRST_SP_REGNUM, LAST_SP_REGNUM.
- (REGISTER_BYTES): Recompute this.
- * rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
- LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
- some concomitant formatting changes.
- #include "gdbcmd.h", so we can define commands here.
- (struct variant): New structure.
- (COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES, num_registers): New macros.
- (register_names_rs6000, register_names_uisa, register_names_403,
- register_names_403GC, register_names_505, register_names_860,
- register_names_601, register_names_602, register_names_603,
- register_names_604, register_names_750, variants): New variables.
- (rs6000_register_name, install_variant, find_variant_by_name,
- install_variant_by_name, list_variants, show_current_variant,
- set_processor, show_processor): New functions.
- (_initialize_rs6000_tdep): Define new commands `set processor' and
- `show processor', and call install_variant_by_name to set the
- default variant.
- * rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
- LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
- some concomitant formatting changes.
- * configure.in: Accept the `--with-cpu' flag, to specify a default
- processor variant.
- * acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
- by configure's `--with-cpu' flag.
- * config.in, configure: Regenerated.
-
-Sun Jan 31 15:24:24 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * buildsym.h, buildsym.c: Convert to ANSI-only.
-
- * buildsym.h, buildsym.c: Reformat to standard.
-
- * buildsym.c (merge_symbol_lists): Remove unused variable.
- (_initialize_buildsym): Remove, does nothing.
-
-1999-01-31 J.T. Conklin <jtc@redbacknetworks.com>
-
- * i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sparc-stub.c,
- sparcl-stub, sparclet-stub.c: Change declaration of putDebugChar
- to include explicit void return type as per documentation. Fix up
- occasions where stubs erroneously checked return type.
-
-Sun Jan 31 13:18:33 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- From J.T. Conklin <jtc@redbacknetworks.com>:
- * remote.c (remote_query): Fix tipo.
-
-Fri Jan 29 15:25:09 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.tgt (v850): Add wildcard to match.
-
-Fri Jan 29 16:44:01 1999 Edith Epstein <eepstein@sophia.cygnus.com>
-
- * inferior.h: Ran indent.
-
- * fork-child.c: Ran indent.
-
- * infrun.c : Ran indent.
-
-Fri Jan 29 12:57:34 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * infrun.c (_initialize_infrun): Do not stop or print anything
- when a SIGWINCH is received.
-
- * Makefile.in (m2-exp.tab.c): Use YACC not BISON.
- (f-exp.tab.c): Ditto.
- (jv-exp.tab.c): Ditto.
- (c-exp.tab.c): Ditto.
- (YACC): Define as @YACC@.
-
-1999-01-29 Martin Hunt <hunt@cygnus.com>
-
- Changes from Keith Seitz <keiths@cygnus.com>
- * valops.c (value_assign): Add calls to register_changed_hook and
- memory_changed_hook to inform UIs that the user has changed
- the target's registers/memory.
- * findvar.c (write_register_gen): Remove call to pc_changed_hook.
- * defs.h: Remove declaration for pc_changed_hook and
- add declarations for register_changed_hook and
- memory_changed_hook.
- * top.c: Ditto.
-
-1999-01-29 Mark Alexander <marka@cygnus.com>
-
- * procfs.c (wait_fd): Handle deleted threads correctly.
-
-1999-01-28 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * utils.c (init_page_info): Force window size if running under emacs.
-
-1999-01-27 James Ingham <jingham@cygnus.com>
-
- * typeprint.c (whatis_exp): Remove static declaration.
-
-Wed Jan 27 16:50:25 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * hp-psymtab-read.c: Reformat using indent.
-
-Wed Jan 27 13:20:25 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * hp-psymtab-read.c: Reformat comments, update copyright.
-
-Tue Jan 26 16:02:47 1999 Mark Alexander <marka@cygnus.com>
-
- * v850-tdep.c (v850_generic_reg_names, v850e_reg_names,
- v850_register_names, v850_processor_type_table): Declare tables
- and structures for handling differences in register names for
- v850 and v850e.
- (struct reg_list): Define new structure for creating tables
- of register bit masks in v850e instrutions.
- (handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
- (v850_scan_prologue): Recognize v850e instructions: callt, prepare,
- and pushm.
- (v850_target_architecture_hook): New function to set register
- names based on current machine.
- (_initialize_v850_tdep): Set up target_architecture_hook.
- * config/v850/tm-v850.h (v850_register_names): Declare.
- (REGISTER_NAME): Define to refer to v850_register_names.
- (SR0_REGNUM, CTBP_REGNUM): Define.
- (PS_REGNUM): Redefine in terms of SR0_REGNUM.
-
-Tue Jan 26 18:27:26 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * Makefile.in (c-exp.tab.c): Use BISON instead of YACC, to pick
- the correct value from configure output.
- (jv-exp.tab.c): Ditto.
- (f-exp.tab.c): Ditto.
- (m2-exp.tab.c): Ditto.
-
-1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * breakpoint.h (ep_is_exception_catchpoint): Add prototype.
- * frame.h (select_and_print_frame): Add prototype.
- * stack.c (func_command): Call select_and_print_frame with correct
- number of arguments. Reformat whitespace.
-
-Tue Jan 26 16:53:54 1999 Fernando Nasser <fnasser@cygnus.com>
-
- * remote.c (remote_query): fix maximum packet size to account for
- remote_debug use.
- (putpkt): add comment to alert about extra byte need.
-
-Mon Jan 25 19:55:30 1999 Mark Alexander <marka@cygnus.com>
-
- * sh-tdep.c (sh_target_architecture_hook): Return immediately
- when a matching machine is found.
-
-Fri Jan 22 09:10:35 1999 Mark Alexander <marka@cygnus.com>
-
- * remote-mips.c (mips_initialize): Fix parameters to clear_breakpoint.
- (common_breakpoint): Restore support for instruction breakpoints
- on non-LSI targets.
-
-Thu Jan 21 17:16:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * stack.c: Close open comment.
- * symtab.c (find_pc_sect_line): Ditto.
-
-Thu Jan 21 17:51:51 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * procfs.c (init_procfs_ops): New function, fills in procfs_ops,
- init only nonzero fields, leave to_require_attach and
- to_require_detach empty, not needed for /proc systems yet.
- (_initialize_procfs): Call init_procfs_ops.
-
- From J.T. Conklin <jtc@redbacknetworks.com>:
- * top.c (init_main): Fix tipo in description of the remotetimeout
- variable.
- * breakpoint.c (bpstat_stop_status): Handle systems where
- DECR_PC_AFTER_BREAK != DECR_PC_AFTER_HW_BREAK.
-
-Thu Jan 21 17:25:46 1999 Mark Alexander <marka@cygnus.com>
-
- * mon960-rom.c (_initialize_mon960): Call init_mon960_cmds
- to fill in mon960_cmds structure properly.
-
-Wed Jan 20 17:53:22 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-sds.c (sds_ops): Define only once.
- (init_sds_ops, sds_command, _initialize_remote_sds): Declare.
- (init_sds_ops): Init only non-zero fields.
-
-Wed Jan 20 15:45:15 1999 Mark Alexander <marka@cygnus.com>
-
- * h8300-tdep.c (original_register_names, h8300h_register_names,
- h8300_register_names): Define new variables.
- (set_register_names): New function to set register names based on
- current CPU type.
- (h8300_command, h8300h_command, h8300s_command): Call
- set_register_names.
- * config/h8300/tm-h8300.h (h8300_register_names): Declare.
- (REGISTER_NAME): Define to refer to h8300_register_names.
-
-1999-01-19 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * sol-thread.c abug-rom.c cpu32bug-rom.c dbug-rom.c m32r-rom.c
- mac-nat.c mon960-rom.c op50-rom.c ppc-bdm.c remote-adapt.c
- remote-array.c remote-bug.c remote-e7000.c remote-eb.c remote-es.c
- remote-est.c remote-hms.c remote-mm.c remote-nindy.c remote-nrom.c
- remote-os9k.c remote-rdp.c remote-sds.c remote-sim.c remote-st.c
- remote-udi.c rom68k-rom.c sh3-rom.c sparcl-tdep.c sparclet-rom.c
- v850ice.c win32-nat.c: cosmetic changes to conform to coding
- standards.
-
-1999-01-19 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Use aclocal to generate GDB's aclocal.m4 script.
- * acinclude.m4: New file, containing the hand-written local macro
- definitions that used to be in aclocal.m4. Don't sinclude
- ../bfd/aclocal.m4 any more; running aclocal in this directory will
- get us the definitions we need. HOWEVER: Do sinclude
- ../bfd/acinclude.m4, because we need the definition of
- BFD_NEED_DECLARATION.
- * aclocal.m4: Regenerated by aclocal.
- * configure: Regenerated by autoconf.
-
-Tue Jan 19 10:27:23 1999 David Taylor <taylor@texas.cygnus.com>
-
- * breakpoint.c (disable_breakpoints_in_shlibs): new parameter,
- silent, controls whether to print message about removal of shared
- library breakpoints.
- * breakpoint.h (disable_breakpoints_in_shlibs): decl updated.
- * irix5-nat.c (clear_solib): call disable_breakpoints_in_shlibs.
- * osfsolib.c (clear_solib): ditto.
- * solib.c (clear_solib): ditto.
- * somsolib.c (som_solib_restart): update call to
- disable_breakpoints_in_shlibs.
-
- * target.h (child_post_attach): only declare if CHILD_POST_ATTACH
- is define.
-
-Tue Jan 19 18:07:11 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * corelow.c (solib_add_stub): Ditto.
- (core_file_to_sym_file): Cast make_cleanup parameter.
-
- * solib.c (symbol_add_stub, solib_map_sections): Change argument
- to PTR insted of a char*. Matches catch_errors interface.
-
-Mon Jan 18 14:01:24 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-array.c (array_open): Don't use fprintf_filtered to send
- data to the log file.
-
- * remote-array.c (handle_load_dll): Change argument type to PTR so
- that it is compatible with catch_errors.
- * ocd.c (ocd_start_remote): Ditto.
- * remote-sds.c (sds_start_remote): Ditto.
-
- * win32-nat.c (win32_child_thread_alive): Namespace proof
- child_thread_alive.
- (init_child_ops): Update.
-
-Mon Jan 18 12:03:47 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-rdi.c (arm_rdi_open): Set gdb_hostif.hostosarg and
- gdb_hostif.dbgarg to NULL instead of stdout.
- (voiddummy, myprint, mywritec): Use gdb_stdout instead of stdout.
-
-Mon Jan 18 16:40:50 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * ser-ocd.c (ocd_open): Handle Unix case gracefully.
-
- * target.c (dummy_target): Don't initialize statically.
- (init_dummy_target): New function, fills in dummy_target.
- (initialize_targets): Use it.
- * hpux-thread.c (hpux_thread_ops): Don't initialize statically.
- (init_hpux_thread_ops): New function, fills in hpux_thread_ops.
- (_initialize_hpux_thread): Use it.
- * m3-nat.c (m3_ops): Don't initialize statically.
- (init_m3_ops): New function, fills in m3_ops.
- (_initialize_m3): Use it.
-
-1999-01-18 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * sol-thread.c: delete compile time initialization of target_ops
- (_initialize_sol_thread): initialize target_ops at run time.
- * hpux-thread.c: added target_ops entry.
- * m3-nat.c: ditto.
-
-Mon Jan 18 15:19:13 1999 David Taylor <taylor@texas.cygnus.com>
-
- * procfs.c (procfs_ops): delete compile time initialization.
- (_initialize_procfs): initialize procfs_ops at run time.
-
-Mon Jan 18 12:51:44 1999 Christopher Faylor <cgf@cygnus.com>
-
- * configure.in: Ensure that -luser32 is always linked in
- for cygwin build.
- * configure: Regenerated.
-
-Mon Jan 18 08:38:05 1999 Mark Alexander <marka@cygnus.com>
-
- * values.c (value_virtual_fn_field): Clear the pointed-to
- offset when casting to the base class.
-
-Mon Jan 18 10:30:51 1999 David Taylor <taylor@texas.cygnus.com>
-
- * remote-udi.c (init_udi_ops): change non-existant udi_run_ops to
- udi_ops; delete NULL initializers.
-
-Mon Jan 18 12:03:47 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * serial.c (serial_close): gdb_fclose tages gdb_file** arg, not
- gdb_file*.
-
- * f-valprint.c, target.c, gdbarch.c: Pass gdb_stderr not stderr.
-
-Mon Jan 18 10:46:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * stack.c (print_frame_info_base): Don't cast call to
- catch_errors.
- (print_args_stub): Change char* arg to PTR.
- * symmisc.c (print_symbol): Ditto.
- * top.c (quit_cover): Ditto.
- * remote.c (remote_open_1, remote_start_remote): Ditto.
- * infrun.c (normal_stop, hook_stop_stub, restore_selected_frame):
- Ditto.
-
- * stack.c (backtrace_command): Cast first arg of make_cleanup to
- make_cleanup_func.
- * remote.c (remote_kill): Cast putpkt arg to catch_errors_ftype.
-
-Mon Jan 18 08:47:02 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * defs.h (catch_errors_ftype): Define.
- (catch_errors): Replace char* arg with PTR arg.
- * top.c (catch_errors): Update
-
- * breakpoint.c (bpstat_stop_status, bpstat_stop_status,
- delete_breakpoint, breakpoint_re_set): Delete all casts in call to
- catch_errors.
- (breakpoint_cond_eval, watchpoint_check,
- cover_target_enable_exception_callback, breakpoint_re_set_one):
- Arg is PTR not char*.
-
- * breakpoint.c (cover_target_enable_exception_callback): Change
- type to int. Check for cast values of 0 and -1. Return a result!
- (insert_breakpoints): Move declaration of SAL and ARGS to where
- they are used.
-
-1999-01-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * remote.c (remote_query): new function - creates proper interface
- to the remote protocol "q" command.
-
-Fri Jan 15 17:11:48 EST 1999 Zdenek Radouch (radouch@cygnus.com)
-
- * config/fr30/tm-fr30.h: Changed ABI to match GCC change
- (always use pointer for structs passed by value).
-
-1999-01-15 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * target.h: added entry for target queries (to_query)
- target.c: ditto.
-
-Thu Jan 14 18:29:17 1999 David Taylor <taylor@texas.cygnus.com>
-
- * remote-mm.c (mm_wait): fix stream arg to gdb_flush.
- * remote-udi.c (udi_wait): fix stream arg to fwrite.
- * symmisc.c (maintenance_check_symtabs): fix stream argument to
- print_address_numeric.
-
-Wed Jan 13 19:33:16 1999 David Taylor <taylor@texas.cygnus.com>
-
- * breakpoint.c (insert_breakpoints): insert cast to eliminate
- warning.
-
-Wed Jan 13 14:59:02 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * infrun.c (set/show scheduler-locking) New command. Set a
- mode bit that will control how GDB attempts to control thread
- scheduling for step, continue, etc. (resume): make use of
- the schedule-locking mode.
- * target.h (struct target_ops): new field to_has_thread_control.
- * sol-thread.c: initialize target_ops to_has_thread_control.
- * procfs.c: ditto.
- * target.c: ditto.
- * m3-nat.c: ditto.
- * remote.c: ditto.
- * hpux-thread.c: ditto.
- * thread.c: cull duplicate prototypes. Move prototypes to top.
- * serial.c: indentation cleanup.
- * breakpoint.c: add casts to eliminate compiler warnings.
-
-Tue Jan 12 17:00:00 1999 Edith Epstein <eepstein@sophia.cygnus.com>
-
- * inftarg.c (child_create_inferior): fixed HPUXHPPA specific
- call to fork_inferior. The shell param is now NULL.
-
-1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * monitor.c (init_base_monitor_ops): Whitespace cleanup.
- (_initialize_remote_monitors): Same.
-
-1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * monitor.c (init_monitor_ops): Initialize the monitor_ops
- structure if it hasn't already been done.
-
-Tue Jan 12 14:50:10 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * inftarg.c (child_ops): Don't initialize statically.
- (init_child_ops): New function, fills in child_ops.
- (_initialize_inftarg): Use it.
- (child_post_attach): Declare extern.
- (child_wait): Fix ambiguous parens.
- (child_attach_to_process): Remove unused local wstatus.
- (child_insert_fork_catchpoint, child_remove_fork_catchpoint,
- child_insert_vfork_catchpoint, child_remove_vfork_catchpoint,
- child_has_forked, child_insert_exec_catchpoint,
- child_remove_exec_catchpoint): Return a value.
-
-Mon Jan 11 16:43:44 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (remote_wait): Add inferior_pid to thread list only
- if it is not already there.
-
-1999-01-11 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * scm-tags.h: Update FSF's address on copyright notice.
- * ser-e7kpc.c: Same.
- * gnu-nat.h: Same.
-
-Mon Jan 11 13:45:57 1999 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * dwarf2read.c (dump_die): Change stderr to gdb_stderr.
- * expprint.c (print_subexp): fprintf => fprintf_unfiltered.
- * jv-typeprint.c (java_type_print_base): fputs => fputs_filtered.
- * stack.c (struct function_bounds): Remove superfluous `typedef'.
- * symfile.c (list_overlays_command): stdout => gdb_stdout.
- * symmisc.c (maintenance_check_symtabs): stdout => gdb_stdout.
- * utils.c (print_spaces): Make more efficient.
-
-Mon Jan 11 13:55:51 1999 David Taylor <taylor@texas.cygnus.com>
-
- * utils (print_spaces): fix arg to strcat; fix formatting.
-
-Fri Jan 8 11:57:24 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * exec.c (exec_ops): Don't initialize statically.
- (init_exec_ops): New function, fills in exec_ops.
- (_initialize_exec): Use it.
-
-Thu Jan 7 17:50:15 EST 1999 Zdenek Radouch (radouch@cygnus.com)
-
- Beta FR30 port.
- * fr30-tdep.c
- * config/fr30/tm-fr30.h
-
-Wed Jan 6 12:28:35 1999 David Taylor <taylor@texas.cygnus.com>
-
- * configure.in: Add an --enable-tui argument. Construct
- tui/Makefile from tui/Makefile.in. Use AM_PROG_CC_STDC. If we
- have the GUI, then we need this to process libgui.h.
- (ENABLE_CFLAGS): define and export BUILD_TUI.
- (AC_CHECK_HEADERS): Add check for term.h.
-
- * configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs.
-
- * config.in, configure : regenerated.
-
- * Makefile.in: Allow the TUI code to be conditionally enabled.
- (TUI_LIBRARY): New variable, value are set by the configuration
- script. Set to the empty string when the TUI isn't enabled.
- (gdb$(GDBEXT)): Use those, instead of referring to all-tui and
- tui/libtui.a directly.
- (BUILD_TUI): build the tui -- only when configured with
- --enable-tui.
- (YLWRAP): use ylwrap to avoid problems on systems w/o bison.
- (gdb$(EXEEXT)): make it dependent on BUILD_TUI.
- (all-tui): remove dependency from phony target.
- (c-exp.tab.c): use ylwrap instead of bison.
- (jv-exp.tab.c): ditto.
- (f-exp.tab.c): ditto.
- (m2-exp.tab.c): ditto.
- (ALLDEPFILES): add somread.c, hp-psymtab-read.c, hp-symtab-read.c.
- (SFILES): remove the above files
- (COMMON_OBS): remove somread.o
- (SFILES): Add the tui files to this, so they get included in etags
- tables.
- (gdb$(EXEEXT)): Add all-tui to the list of dependencies, and add
- tui/libtui.a to the link list.
- (all-tui): New rule, which does a recursive make in the tui
- subdir.
- (tui/libtui.a): When recursing, pass down ${FLAGS_TO_PASS}. And
- don't echo the make command. This is closer to what the other
- recursions do.
- (HFILES_NO_SRCDIR): add hpread.h
- (COMMON_OBS): add hp-psymtab-read.o, hp-symtab-read.o
- (SFILES): add hp-psymtab-read.c, hp-symtab-read.c add rules for
- the new files. Remove hpread.c, hpread.o
- (gdb$(EXEEXT)): Depend on the actual tui library, not on a
- fictitious target. Since the fictitious target never existed,
- make would always relink.
- (tui/libtui.a): Always recurse to make sure the library is up to
- date.
-
-Wed Jan 6 12:05:12 1999 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote.c: Pacify --enable-build-warnings, reformat code
- to conform to standards, fix spelling errors.
- (ishex, stubhex, record_currthread, etc): Declare.
- (ishex, stubhex): Declare char arg as int.
- (pack_string): Comment out, never used but possibly useful.
- (threadref_to_int, remote_get_threadinfo, etc): Make static.
-
-Wed Jan 6 11:43:32 1999 David Taylor <taylor@texas.cygnus.com>
-
- The following changes were made by Elena Zannoni
- <ezannoni@cygnus.com> and Edith Epstein <eepstein@cygnus.com> as
- part of a project to merge in changes made by HP.
-
- * c-exp.y: use external flag hp_som_som_object_present to decide
- whether code was compiled by HP's compilers. Add two new C++
- tokens for true and false.
- (yylex): check for template name is done differently for the
- HP/aCC compiler case. Change some of the template processing code
- for handling HP aCC templates. Handle true and false tokens.
-
-Tue Jan 5 11:13:36 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (record_curthread): Must not modify inferior_pid when
- called from wait_for_inferior. Instead, if a new thread-id is
- detected, call add_thread.
- (MAGIC_NULL_PID): new macro, use instead of the magic number
- "42000".
- (remote_find_new_threads): if inferior_pid is unknown, get and use
- the current thread id.
- (remote_start_remote): on connecting, attempt to get the current
- thread id for inferior_pid.
- (remote_resume): If pid == -1, then resume any-thread (not the
- current thread specifically). Also some cosmetic fixups.
-
- * thread.c (info_threads_command): don't initialize current_pid
- until after call to FIND_NEW_THREADS (which may change inferior_pid).
- Also some cosmetic fixups.
- * infrun.c: cosmetic fixups and casts to avoid warnings.
- * infcmd.c: cosmetic fixups, mainly long lines.
-
-Tue Jan 5 11:55:57 1999 David Taylor <taylor@texas.cygnus.com>
-
- * target.c (noprocess): terminate sentence with a period.
- * breakpoint.c (catch_command_1): ditto.
-
- * c-valprint.c (c_value_print): remove hack^2 from HP; it causes
- testsuite losses with no real gain.
-
- * inferior.h (START_INFERIOR_TRAPS_EXPECTED): restore, but only
- if tm-*.h hasn't overridden default value.
-
-1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Fix whitespace indentation for --help.
- * configure: Regenerated.
+ Patch from Egor Duda <deo@logos-m.ru>:
+ * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
+ type.
+
+2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * uw-thread.c: New file to support UnixWare user-mode threads:
+ contributed by Nickolas Duffek <nsd@cygnus.com>.
+ * target.h (struct target_ops): New vector, to_extra_thread_info,
+ allows back-ends to give extra details in info thread display.
+ (target_extra_thread_info): define new macro.
+ (target_find_new_threads): simplify macro. Cleanup comments.
+ * target.c (to_extra_thread_info): default and inherit new vector.
+ (cleanup_target): eliminate PARAMS, break up long lines,
+ provide default definition for to_extra_thread_info, and
+ to_find_new_threads. Default to_thread_alive and to_query
+ to return_zero, not target_ignore (they each return int not void).
+ (debug_to_find_new_threads): new debug entry.
+ (setup_target_debug): add debug_to_find_new_threads.
+ * gdbthread.h: export struct thread_info, find_thread_pid, and
+ iterate_over_threads. Add comments. Eliminate PARAMS. Update
+ copyright. Add new private data pointer for use by target back-ends.
+ * thread.c (struct thread_info): move definition to gdbthread.h.
+ (find_thread_pid): new exported function for thread lookup.
+ (iterate_over_threads): new exported function for applying
+ arbitrary operations to threads. Update copyright to 2000.
+ (info_threads_command): use new target_extra_thread_info vector
+ to display extra information about each thread (if implemented).
+ * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
+ Add defines for PIDGET, etc.
+ * config/i386/tm-i386sol2.h: ditto.
+ * config/sparc/tm-sun4sol2.h: ditto.
+ * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
+ * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
+ if -lpthread and -lpthreads fail.
+
+ * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
+ (proc_flags): combine flags that UnixWare splits into two locations.
+ (proc_modify_flag): add support for PR_KLC (kill on last close).
+ (proc_[un]set_kill_on_last_close): new functions.
+
+2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * infrun.c (normal_stop): Print out thread id when we stop.
+
+2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * remote.c (remote_open_1): Fix message so it does not imply a
+ specific syntax for serial ports, as it is OS dependent.
+ (remote_async_open_1): Ibid.
+ (init_remote_ops): Ibid.
+
+2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
+ "set remotebaud" command (if set) when no speed is specified on
+ the "target rdi" command.
+
+2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
+ 115200.
+ (baud_options[]): Ibid.
+
+2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
+ used by each operating system.
+
+2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * breakpoint.c (until_break_command): Add an argument for the
+ continuation, the beginning of the cleanups set up by this
+ command.
+ (until_break_command_continuation): Do cleanups until the one
+ passed in as argument instead of doing all of them.
-1999-01-04 Manuel Bouyer <bouyer@antioche.lip6.fr>
+ * infcmd.c (finish_command_continuation): Expect a new argument,
+ which indicates up to where to do cleanups. Update calls to
+ do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
+ (finish_command): Add another argument for the continuation: the
+ starting cleanup for this command.
- * main.c: Add --write command line option, document -w.
- * gdb.1: Document --write.
+2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
-1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
+ From Grant Edwards <grante@visi.com> (original patch from Thomas
+ Zenker ):
+ * rdi-share/ardi.c: Allow interruption of interruptible
+ targets with a <CNTL-C>.
- * configure.in: Require autoconf 2.12.1 or higher.
- * doc/configure.in: Ditto.
- * nlm/configure.in: Ditto.
- * rdi-share/configure.in: Ditto.
- * testsuite/configure.in: Ditto.
- * doc/Makefile.in: Don't hardcode $(SHELL).
- * nlm/Makefile.in: Ditto.
- * rdi-share/Makefile.in: Ditto.
- * testsuite/Makefile.in: Ditto.
+2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
-Mon Jan 4 12:53:03 1999 Stan Shebs <shebs@andros.cygnus.com>
+ * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
+ to control port to accommodate some versions of Angel.
- * remote-vx.c (init_vx_ops, init_vx_run_ops): Remove unneeded
- inits of new fields, including ref to bogus field.
- (vx_ops, vx_run_ops): Make static.
+2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
-Mon Jan 4 15:05:29 1999 David Taylor <taylor@texas.cygnus.com>
+ * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
+ Add interpretation for C Support Library packets.
- * inferior.h (START_INFERIOR_TRAPS_EXPECTED): delete,
- already defined in tm.h.
+2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
- * inftarg.c: change <sys/unistd.h> to <unistd.h> and
- conditionalize its inclusion.
- * infttrace.c: ditto.
+ * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
+ is now being modified.
+ * rdi-share/devsw.h: Adjust declaration of the above funtion.
-For older changes see ChangeLog-98
+For older changes see ChangeLog-99
\f
Local Variables:
mode: change-log