+Wed Aug 19 03:07:53 1998 Richard Henderson <rth@cygnus.com>
+
+ * config/alpha/alpha-linux (XDEPFILES): Build ser-tcp.
+
+1998-08-18 Keith Seitz <keiths@cygnus.com>
+
+ * stack.c: Define new hook, selected_frame_level_changed_hook, which
+ will be called whenever the selected stack level changes.
+ (select_frame): Call the selected_frame_level_changed_hook.
+
+Tue Aug 18 18:03:42 1998 Stan Shebs <shebs@andros.cygnus.com>
+
+ * remote-rdi.c (arm_rdi_open): Pass serial device name to
+ Adp_OpenDevice, and include it in error reports.
+
+1998-08-18 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * configure.in: Add more header files to AC_CHECK_HEADERS.
+ * configure: Regenerated.
+
+ * command.c: Include wait.h or sys/wait.h if present.
+ * inftarg.c: Ditto.
+ * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
+ on autoconf test.
+ * infptrace.c: Ditto.
+
+ * expprint.c: Include ctype.h for isprint prototype.
+ * i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
+ * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
+ present, based on autoconf test.
+
+ * utils.c: Include curses.h and term.h if present.
+ (puts_debug): Change 'carriage_return' local variable to return_p
+ to avoid name clash.
+
+ * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
+ determine it with autoconf.
+ * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
+ with autoconf.
+ * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
+ with autoconf.
+ * config/i386/nm-i386v.h: Ditto.
+ * config/i386/nm-symmetry.h: Ditto.
+ * config/m88k/xm-cxux.h: Ditto.
+ * config/m88k/xm-dgux.h: Ditto.
+
+ * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
+ * config/m68k/nm-delta68.h: Removed.
+
+Fri Aug 14 11:14:03 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (set_movm_offsets): Change second argument to
+ be the actual args to movm itself. All callers changed. Only set
+ fi->fsr.regs[x] if reg X is saved by the movm instruction.
+
+Fri Aug 14 04:18:23 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ * sol-thread.c (lwp_to_thread): Fix error message for failing
+ td_ta_map_lwp2thr call.
+ (ps_lgetLDT): Mask off upper bits in GS register when comparing
+ with selector.
+
+Wed Aug 12 16:30:01 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * remote-sim.c (simulator_command): Reset register cache after
+ simulator command.
+
+Wed Aug 12 09:00:26 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * expprint.c (dump_prefix/postfix_expression): Don't try to print type
+ expressions.
+
+Tue Aug 11 11:33:25 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * c-typeprint.c (c_print_type): Don't crash if varstring is null.
+ * expprint.c expression.h (dump_expression): Rename to
+ dump_prefix_expression.
+ * Print out the expression in normal form. Call print_longest
+ instead of trying to do it ourselves.
+ * (dump_postfix_expression): New function, prints out the expression
+ with indentation and better formatting and interpretation.
+ * parse.c (parse_exp_1): Put calls to dump expressions under ifdef
+ MAINTENANCE_CMDS and expressiondebug variable.
+
+Thu Aug 6 13:20:02 1998 Ron Unrau <runrau@cygnus.com>
+
+ * infrun.c (wait_for_inferior): use stop_func_name instead of
+ stop_func_start to decide that no debug info exists.
+
+start-sanitize-sky
+Thu Aug 6 13:15:05 1998 Ron Unrau <runrau@cygnus.com>
+
+ * txvu-tdep.c: add VU0/1 control registers
+ * config/mips/tm-txvu.h: ditto
+
+Tue Aug 4 11:02:50 1998 Ron Unrau <runrau@cygnus.com>
+
+ * txvu-tdep.c (txvu_insert_breakpoint): make sure CPU context is
+ set to correct VU memory space.
+ (txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc
+ * config/tm-txvu.h: use new track-table address
+ Do note define BREAKPOINT_FROM_PC anymore
+
+Fri Jul 31 16:06:05 1998 Ron Unrau <runrau@cygnus.com>
+
+ * config/tm-txvu.h: use NUM_CORE_REGS instead of NUM_R5900_REGS
+ * mips-tdep.c: use NUM_CORE_REGS
+ * txvu-tdep.c: use NUM_CORE_REGS, add function prototypes
+ (txvu_insert_breakpoints): use VIF interrupt bit
+
+end-sanitize-sky
+Thu Jul 30 13:53:50 1998 Mark Alexander <marka@cygnus.com>
+
+ * mips-tdep.c (mask_address_p): New variable.
+ (mips_addr_bits_remove): Test mask_address_p to decide whether
+ to mask off the upper 32 bits of addresses.
+ (_initialize_mips_tdep): Add command to set mask_address_p.
+ (mips_call_dummy_address): New function.
+ * config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
+ call mips_call_dummy_address.
+
+1998-07-29 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * symfile.c (add_symbol_file_command): Test for the from_tty
+ parameter and avoid query when not interactive.
+
+start-sanitize-am33
+Wed Jul 29 10:39:29 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (set_movm_offsets): Do nothing for the am33
+ registers if we are not in am33 mode.
+ (mn10300_frame_chain, mn10300_frame_saved_pc): Similarly.
+ (set_machine_hook): Keep track of whether or not we're in am33 mode.
+
+end-sanitize-am33
+Mon Jul 27 16:11:42 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (remote_set_transparent_ranges): new function.
+ Send the start and end addresses of all loadable read-only
+ sections down to the trace target, so that it can treat them
+ as "transparent" (ie. don't care if they were collected or not).
+
+Mon Jul 27 15:38:07 1998 Mark Alexander <marka@cygnus.com>
+
+ * mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix
+ for setting frame address in optimized code; made unnecessary
+ by compiler fixes.
+
+Mon Jul 27 10:45:56 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * symtab.c (decode_line_1): For minimal symbol, call
+ find_pc_sect_line() to make sure the line number gets set
+ properly.
+ (print_symbol_info): Redeclare function void.
+
+1998-07-27 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The
+ stack pointer et al are synthesized from the SP_REGNUM (etc)
+ defines and should not be mentioned in REGISTER_NAMES.
+
+start-sanitize-am33
+Mon Jul 27 08:54:41 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (mn10300_frame_chain): Account for space saved
+ by am33 register saves.
+ (mn10300_frame_saved_pc): Similarly.
+
+end-sanitize-am33
+Fri Jul 24 14:41:19 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (encode_actions): Treat register names and simple
+ variable names as special cases and don't convert them to byte-
+ codes: these things can be collected far more efficiently
+ without invoking the bytecode interpreter.
+
+Fri Jul 24 13:32:46 1998 Mark Alexander <marka@cygnus.com>
+
+ * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
+ work on hosts of any endianness.
+ * config/i386/tm-i386v.h: Ditto.
+
+Fri Jul 24 07:41:12 1998 Mark Alexander <marka@cygnus.com>
+
+ * mn10300-tdep.c (set_movm_offsets): New helper function
+ for mn10300_analyze_prologue.
+ (mn10300_analyze_prologue): Simplify by factoring out common code.
+ Fix bugs in setting frame address for optimized code.
+ Use read_memory_nobpt instead of target_read_memory.
+
+Thu Jul 23 17:01:17 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (collect_symbol): handle LOC_ARG case.
+
+Thu Jul 23 15:07:40 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
+ in a function prologue before the SAVE instruction.
+ (sparc_frame_saved_pc): Ditto.
+ * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
+
+Thu Jul 23 14:58:09 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * i386-tdep.c (i386_get_frame_setup): Recognize function
+ prologues in code compiled with -fcheck-stack.
+
+Thu Jul 23 14:49:27 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * remote-mips.c (remote_mips_insert_hw_breakpoint,
+ remote_mips_remove_hw_breakpoint): New functions for hardware
+ breakpoints on LSI targets.
+ * config/mips/tm-embed.h (target_remove_hw_breakpoint,
+ target_insert_hw_breakpoint): Define to call
+ remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
+ respectively.
+
+start-sanitize-sky
+Thu Jul 23 13:00:28 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START)
+ Changed to use addresses in kseg1 range.
+
+end-sanitize-sky
+1998-07-21 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * source.c (print_source_lines): Print "No such file or directory"
+ just once.
+ (directory_command): same as above; resets if user issues dir.
+
+Sun Jul 19 02:11:45 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * symtab.c (decode_line_2): Instead of printing a prompt
+ and calling command_line_input() without a prompt, just
+ call it with the proper args. This makes the GUI work too.
+
+Fri Jul 17 9:26:50 1998 Ron Unrau <runrau@cygnus.com>
+
+ * blockframe.c (find_pc_sect_partial_function): allow for the possi-
+ bility of multiple symbols at the same address when finding high.
+ * breakpoint.c (resolve_sal_pc): if the function based section lookup
+ fails, try getting the section from the minimal symbol table.
+ * parse.c (write_exp_msymbol): use symbol_overlayed_address to get
+ the LMA of a minimal symbol if unmapped.
+ * symtab.c (find_line_symtab): change interface to return symtab
+ containing the best linetable found.
+ (decode_line_1): use find_line_symtab to set val.symtab. This should
+ improve support for source files with multiple symtabs.
+start-sanitize-sky
+ * tm-txvu.h: include tm-mips64.h instead of starting from scratch.
+end-sanitize-sky
+
+Wed Jul 15 11:51:33 1998 Keith Seitz <keiths@cygnus.com>
+
+ * main.c (main): Fix violations of GNU coding standard.
+
+ * breakpoint.c: Export delete_command.
+
+ * infcmd.c: Export continue_command, stepi_command, and nexti_command.
+
+ * Makefile.in: Add target for v850ice.o.
+
+ * configure.tgt: Add cygwin32 dependencies for v850 ice.
+
+Wed Jul 15 10:58:29 1998 Nick Clifton <nickc@cygnus.com>
+
+ * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not
+ have an associated directory.
+
+Mon Jul 13 15:21:04 1998 Mark Alexander <marka@cygnus.com>
+
+ * utils.c (puts_debug): Display non-printable characters in hex
+ instead of octal.
+
+Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (mn10300_generic_register_names): New variable.
+ (set_machine_hook): New function. Copy the appropriate register
+ names into reg_names.
+ (_initialize_mn10300_tdep): Set up to call set_machine_hook.
+ * tm-mn10300 (NUM_REGS): Bump to 32.
+ (REGISTER_NAMES): Updated accordingly.
+
+start-sanitize-am33
+ * mn10300-tdep.c (am33_register_names): New variable.
+ (mn10300_analyze_prologue): Handle regs saved by am33 prologues.
+ * tm-mn10300.h (E0_REGNUM): Define.
+end-sanitize-am33
+
+Tue Jul 7 7:40:13 1998 Ron Unrau <runrau@cygnus.com>
+
+ * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0
+
+Thu Jul 2 15:57:58 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * breakpoint.c (resolve_sal_pc): Accept absence of innermost
+ Lexical block for breakpoint resolution.
+
+Thu Jul 2 10:22:00 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
+ section, but just don't add a 2nd minimal symbol if this is an .mdebug
+ section in an ELF file.
+
+1998-07-01 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * Makefile.in (ax-general.o): Depend on $(defs_h) too.
+ (ax_h): Bother to define this.
+
+Mon Jun 29 19:01:18 1998 Jim Wilson <wilson@cygnus.com>
+
+ * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
+
+Sun Jun 28 11:35:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ Improve support for SunPro F77.
+ * dbxread.c (end_psymtab, process_one_symbol): Handle minimal
+ symbols with trailing underscore names.
+ * minsyms.c (find_stab_function_addr): Ditto.
+ * dbxread.c (process_one_symbol): Ignore N_ALIAS for now.
+ * partial-stab.h (case N_ALIAS): Ditto.
+ * stabsread.c (read_sun_builtin_type): Handle boolean types.
+
+Fri Jun 26 14:03:01 1998 Keith Seitz <keiths@cygnus.com>
+
+ * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
+ TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
+ new search_symbols.
+ Add prototype for search_symbols and free_search_symbols.
+
+ * symtab.c (list_symbols): Rewrite to use new search_symbols.
+ (file_matches): New helper function for search_symbols.
+ (free_search_symbols): New function which frees data returned from
+ search_symbols.
+ (print_symbol_info): New helper function which prints info about a
+ matched symbol to stdout. Extracted from old list_symbols.
+ (print_msymbol_info): New helper function which prints info about
+ a matched msymbol to stdout. Extracted from old list_symbols.
+ (symtab_symbol_info): Extracted from old list_symbols.
+ (variables_info): Use symtab_symbol_info.
+ (functions_info): Use symtab_symbol_info.
+ (types_info): Use symtab_symbol_info.
+ (rbreak_command): Rewrite to use new search_symbols.
+
+Thu Jun 25 22:38:32 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
+ alignment for inferior calls.
+
+Wed Jun 24 23:17:12 1998 Mark Alexander <marka@cygnus.com>
+
+ * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
+ of jsr target address.
+
+Tue Jun 23 19:37:46 1998 Mark Alexander <marka@cygnus.com>
+
+ * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't
+ zero upper byte of address.
+
+Tue Jun 23 17:32:26 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * rs6000-tdep.c (pop_dummy_frame): use memcpy.
+ (push_arguments): use memset.
+ (various other places): fix up indentation and long lines.
+
+Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * configure.in: s/lXext/-lXext/ for Jillian's change.
+
+Tue Jun 23 11:14:04 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * source.c (find_source_lines): fix indentation.
+
+ * config/mips/tm-irix5.h: Modify to work better on irix 6, by
+ making FP registers 8 bytes instead of 4.
+ REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
+ REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
+ * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
+ * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
+ targets with 8-byte FP registers (don't use TARGET_MIPS64).
+ (STACK_ARGSIZE): new macro, how much space is taken up on the
+ stack for each function argument (don't use TARGET_MIPS64).
+ (mips_push_arguments): modify logic to work better on Irix 6
+ (n32 ABI).
+
+Tue Jun 23 12:29:53 1998 Jillian Ye <jillian@cygnus.com>
+
+ * configure.in: Add -lXext to mips_extra_libs
+ * configure: Regenerated.
+
+Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com)
+
+ * symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
+ Changed to pass PC as arg and return 1 if valid (0 otherwise).
+ symtab.h: change prototype to match
+ symtab.c (find_line_pc_range): use new interface
+ breakpoint.c (resolve_sal_pc): ditto
+ gdbtk.c (gdb_set_bp): ditto
+
+Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com)
+
+ * parse.c (target_map_name_to_register): Check target specific
+ aliases *first* so that it can over-ride architectural names
+
+Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com)
+
+ * remote-sds.c (sds_start_remote): Fix printf call.
+
+Tue Jun 16 16:32:08 1998 Mark Alexander <marka@cygnus.com>
+
+ * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
+ crash when in "start".
+
+Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com)
+
+ * dbxread.c: reset function_start_offset after a finishing N_FUN
+ is seen.
+ * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
+ target vectors as needed.
+
+Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com)
+
+ * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
+ CUR_SYMBOL_VALUE as CORE_ADDR instead of long
+ * buildsym.[ch]: export pending_blocks list
+
+Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com)
+
+ * remote.c : Fix remote help string to match that of help.exp.
+
+Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * configure.in (LIBS): Add -lw to the list of libraries if needed.
+
+Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * btowc.c: Removed.
+ * configure.in: Don't see if we need to replace btowc().
+ * Makefile.in: Don't include LIBOBJS.
+ * configure: Regenerated.
+ * gnu-regex.c (regex_compile): Only support i18n [:foo:] if
+ we have btowc().
+
+Wed Jun 10 15:39:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages
+ allow symbols with dots.
+
+ * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive
+ names for parameters.
+
+start-sanitize-java
+ * jv-exp.y: Parser now accepts primitive types.
+ * (parse_number): Use correct ifdef for scanf long double support.
+ * jv-lang.c (java_array_type): Initial cut at array support.
+
+end-sanitize-java
+ * language.c language.h (set_language): Now returns previous language.
+
+ * symtab.c (find_methods): Make static. Cosmetic changes, including
+ indentation, and adding descriptive comments. Move local variable defs
+ into the block they are used in.
+ * Don't call check_stub_method any more. Use gdb_mangle_name to
+ generate the full method name. find_method doesn't need all the other
+ goobldegook that check_stub_method does.
+ * (gdb_mangle_name): Use more descriptive names for parameters. Fix
+ comment.
+start-sanitize-java
+ * (lookup_partial_symbol lookup_block_symbol): Check for java to
+ ensure we can find mangled names.
+end-sanitize-java
+ * (decode_line_1): Move local variable defs into the block they are
+ used in. (Improves code readability.)
+
+Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
+ all-positive enum.
+ (create_set_type): Ditto for all-positive set values.
+ * values.c (unpack_field_as_long): Check for typedef in struct
+ field unpacking.
+
+Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * configure.in: Add some tests for gnu-regex.c's benefit.
+ See if btowc() function is provided in C library.
+ * configure, config.in: Regenerated.
+ * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
+ if necessary.
+ * btowc.c: New file.
+
+ * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
+ benefit.
+ Drop namespace preserving defines for now.
+
+Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * gnu-regex.c: Include "gnu-regex.h", not "regex.h".
+
+Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
+ to stay consistent with the rest of GDB.
+
+Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com)
+
+ * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
+
+Wed Jun 10 10:58:18 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * printcmd.c (disassemble_command): move overlay mapping code
+ "up" into find_pc_partial_function.
+ * blockframe.c (find_pc_partial_function): adjust start address
+ and end address for overlays (mapped vs. unmapped addresses),
+ so that all callers of this function may benefit.
+ * m32r-tdep.c (m32r_skip_prologue): adjust indentation.
+
+Mon Jun 8 16:08:10 1998 Ron Unrau <runrau@cygnus.com>
+
+ * objfiles.c (add_to_objfile_sections): All targets to define
+ TARGET_KEEP_SECTION to permit them to retain bfd sections that
+ GDB would otherwise have discarded.
+
+Fri Jun 5 13:56:19 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
+
+Thu Jun 4 18:35:04 1998 Stan Shebs <shebs@andros.cygnus.com>
+
+ * remote.c (init_extended_remote_ops): Make extended_remote_ops
+ by copying from remote_ops, move it and init_remote_ops to
+ usual place at end of file, remove "void" from arg lists.
+
+Thu Jun 4 17:51:06 1998 Mark Alexander <marka@cygnus.com>
+
+ * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
+ on bi-endian machines.
+ (sparc_extract_return_value): Handle values smaller than int on
+ machines with little-endian data.
+ (sparc_target_architecture_hook): Set bi_endian flag.
+
+Thu Jun 4 12:14:48 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * printcmd.c (disassemble_command): Fix off-by-one error for
+ disassembling functions in unmapped overlay sections.
+
+Thu Jun 4 10:15:03 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * remote.c: merged.
+
+ - Jim Blandy <jimb@zwingli.cygnus.com>
+ (print_packet, remote_packet_command): New functions.
+ (_initialize_remote): Register the remote-packet command.
+ - David Taylor <taylor@texas.cygnus.com>
+ (_initialize_remote): remote-compare is now
+ compare-sections.
+ - Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+ (remote_compare_command): added warning, issued in case
+ of mismatch only.
+
+Thu Jun 4 08:25:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * remote.c (remote_compare_command): New function, new command.
+ Compare object file binary image with corresponding memory on
+ remote target. Report differences.
+
+Tue Jun 2 19:05:04 1998 Mark Alexander <marka@cygnus.com>
+
+ * sparc-tdep.c (sparc_target_architecture_hook): Set target
+ byte order only when it's selectable.
+
+Tue Jun 2 02:01:56 1998 Mark Alexander <marka@cygnus.com>
+
+ * sparc-tdep.c (sparc_target_architecture_hook): New function to
+ set endianness based on machine type.
+ (_initialize_sparc_tdep): Initialize target_architecture_hook.
+ (sparc_print_register_hook): Print PSR and FPSR in fancy format
+ on 32-bit machines.
+ * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
+ call sparc_print_register_hook instead of using inline code.
+ * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
+
+Thu May 28 17:19:14 1998 Keith Seitz <keiths@cygnus.com>
+
+ * main.c (main): Check for NULL from getenv on CYGWIN32.
+
+Thu May 28 09:41:44 1998 Nick Clifton <nickc@cygnus.com>
+
+ * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of
+ Felix Lee (flee@cygnus.com)
+
+Thu May 28 00:27:35 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ * mips-tdep.c (mips_push_dummy_frame): Fix calculation of
+ PROC_REG_OFFSET and PROC_FREG_OFFSET.
+
+Mon Apr 27 14:37:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
+ FP_RAW_REGNUM use the same register location.
+
+ * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
+ FP_REGNUM.
+ (v850_frame_chain): Ditto.
+
+ * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
+ (NUM_REGS): Update.
+ (FP_REGNUM): Update.
+ (FP_RAW_REGNUM): Define.
+
+Wed May 27 14:22:31 1998 Keith Seitz <keiths@cygnus.com>
+
+ * main.c (main): Convert the path returned from getenv to a posix
+ path on cygwin32 hosts.
+
+Mon May 25 13:31:27 1998 Keith Seitz <keiths@cygnus.com>
+
+ * remote.c (remote_open_1): If an error occurs starting the remote,
+ pop the target AND return.
+
+Sat May 23 02:23:09 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED
+ on C++ functions.
+ * valops.c (value_arg_coerce): Add new argument to indicate whether
+ the function has a prototype, handle integer and float promotions
+ accordingly.
+ (call_function_by_hand): Always call value_arg_coerce, pass down
+ prototype information.
+
+Fri May 22 10:56:36 1998 John Metzler <jmetzler@cygnus.com>
+
+ * remote.c (_initialize_remote): Typo extended__remote
+
+Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
+
+ * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
+ (_initialize_gnu_nat): Call new init
+ * mac-nat.c (init_child_ops): Ditto.
+ (_initialize_mac_nat): Ditto.
+ * monitor.c (init_base_monitor_ops): Ditto.
+ (_initialize_remote_monitors): Ditto.
+ * ppc-bdm.c (init_bdm_ppc_ops): Ditto.
+ (_initialize_bdm_ppc): Ditto.
+ * remote-adapt.c (init_adapt_ops): Ditto.
+ (_initialize_remote_adapt): Ditto.
+ * remote-array.c (init_array_ops): Ditto.
+ (_initialize_array): Ditto.
+ * remote-bug (init_bug_ops): Ditto.
+ (_initialize_remote_bug): Ditto.
+ * remote-e7000.c (init_e7000_ops): Ditto.
+ (_initialize_remote_e7000): Ditto.
+ * remote-eb.c (init_eb_ops): Ditto.
+ (_initialize_remote_eb): Ditto.
+ * remote-es.c (init_es1800_ops): Ditto.
+ (init_es1800_child_ops): Ditto.
+ (_initialize_es1800): Ditto.
+ * remote-hms.c (init_hms_ops): Ditto.
+ (_initialize_remote_hms): Ditto.
+ * remote-mm.c (init_mm_ops): Ditto.
+ (_initialize_remote_mm): Ditto.
+ * remote-nindy.c (init_nindy_ops): Ditto.
+ (_initialize_nindy): Ditto.
+ * remote_nrom.c (init_nrom_ops): Ditto.
+ (_initialize_remote_nrom): Ditto.
+ * remote-os9k (init_rombug_ops): Ditto.
+ (_initialize_remote_os9k): Ditto.
+ * remote-rdi.c (init_rdi_ops): Ditto.
+ (_initialize_remote_rdi): Ditto.
+ * remote-rdp.c (init_remote_rdp_ops): Ditto.
+ (_initialize_remote_rdp): Ditto.
+ * remote-sds.c (init_sds_ops): Ditto.
+ (_initialize_remote_sds): Ditto.
+ * remote-sim.c (init_gdbsim_ops): Ditto.
+ (_initialize_remote_sim): Ditto.
+ * remote-st.c (init_st2000_ops): Ditto.
+ (_initialize_remote_st2000): Ditto.
+ * remote-udi.c (init_udi_ops): Ditto.
+ (_initialize_remote_udi): Ditto.
+ * remote-vx.c (init_vx_ops): Ditto.
+ (init_vx_run_ops): Ditto.
+ (_initialize_vx): Ditto.
+ * remote.c (init_remote_ops): Ditto.
+ (init_extended_remote_ops): Ditto.
+ (_initialize_remote): Ditto.
+ * sparcl-tdep.c (init_sparclite_ops): Ditto.
+ (_initialize_sparcl_tdep): Ditto.
+ * v850ice.c (init_850ice_ops): Ditto.
+ (_initialize_v850ice): Ditto.
+ * win32-nat.c: (init_child_ops): Ditto.
+ (_initialize_inftarg): Ditto.
+
+1998-05-21 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * ax-gdb.c (const_var_ref): Don't handle function names. I don't
+ want to implement all the "usual unary conversion" rules for
+ constants.
+ (gen_usual_unary): Turn "function" values into "pointer to
+ function" values, in accordance with ANSI.
+ (gen_deref): Don't do the usual unary conversions here. Let the
+ caller do it. Note that dereferencing a function pointer yields
+ a function designator, which we call an rvalue, not an lvalue.
+ (gen_address_of): Handle functions specially.
+ (gen_struct_ref): Perform the usual unary conversions before
+ calling gen_deref.
+ (gen_expr): In case for the prefix '*' operator, call
+ gen_usual_unary manually.
+
+Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com>
+
+ * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
+ * mips/tm-tx39l.h: Same.
+
+Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com>
+
+ * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
+ Split out as separate function called by skip prologue and scan
+ prologue. new formula handles optimization in which the prologue
+ is interleaved with the body of the function. Also recognizes new
+ variations of prologue encoding. Use of frame pointer is
+ essential to debugging, -fno-omit-frame-pointer
+ (m32r_skip_prologue): Call decode prologue, ignore line info
+ (m32r_scan_prologue): Call decode prologue, ignore line info.
+
+Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com>
+
+ * w89k-rom.c (_initialize_w89k): Call new init function
+ (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
+ data structure for forward compatability with additions to the
+ data structure.
+ * dbug-rom.c (_initialize_dbug_rom): ditto
+ (init_dbug_cmds): ditto
+ * m32r-rom.c (_initialize_m32r_rom): ditto
+ (init_m32r_cmds): ditto
+
+Tue May 19 14:54:11 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (memrange_cmp): use const void * args to avoid
+ ANSI compiler warnings.
+
+1998-05-19 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
+ gen_bitfield_ref, gen_expr): Call error, not abort.
+ * ax-general.c (read_const, generic_ext, ax_trace_quick,
+ ax_label, ax_const_d, ax_reg, ax_print): Same.
+
+ * tracepoint.c: Remove the $(...) syntax for memranges.
+ (validate_actionline, encode_actions, trace_dump_command): Remove
+ clauses for the $(...) syntax.
+ (parse_and_eval_memrange): Function deleted.
+ (_initialize_tracepoint): Update function description.
+
+ * gdbtk.c (struct wrapped_call_objs): Change the `func' member to
+ be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
+ of objects as arguments. Change the object vector to be const,
+ since that's what all the users of this structure seem to expect.
+ (call_obj_wrapper): Cast clientData properly before storing it in
+ the wrapped_args structure.
+
+ * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
+ subcommand of "maintenance", as it should have been from the
+ beginning. #include "gdbcmd.h", to get the declaration for
+ maintenancelist.
+ * Makefile.in: Document that dependency.
+
+Tue May 19 12:00:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * tracepoint.c (get_tracepoint_by_number): new function, to access
+ traceframe_number for use of the GUI.
+
+ * tracepoint.h: added prototype for get_traceframe_number.
+
+Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com>
+
+ * dbxread.c (process_one_symbol): If block addresses are relative to
+ function start addresses, reset function_start_address whenever a new
+ source file is seen.
+
+Mon May 18 13:04:27 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (get_tracepoint_by_number): make sure to advance
+ arg pointer even if we fail to parse a useful number. Otherwise,
+ since this function is called in a loop, it may loop forever!
+ Also change strtol call to allow arbitrary radix.
+ (map_args_over_tracepoints (and other places)): add QUIT; call
+ to loop, to allow breakout using control-C. Not all loops were
+ analyzed to make sure they could terminate cleanly, but even
+ terminating with a messed-up tracepoint list would be better
+ than not terminating at all!
+ (tdump_command): check to see if we're connected to a trace-
+ capable target (currently only "remote") before doing anything
+ else.
+
+Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
+ frame struct before extracting saved register offsets.
+
+Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (encode_actions): fix typo in printf format string.
+
+1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ Implement a few more tracing operators: ^ | & ~ !
+ * ax-gdb.c (gen_integral_promotions, gen_logical_not,
+ gen_complement): New functions.
+ (gen_binop): New argument MAY_CARRY, indicating whether we need to
+ correct the upper bits of the value after performing the
+ operation. Callers changed.
+ (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
+ BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle
+ UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
+
+ * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
+ sign extension.
+
+ * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
+ to match the ANSI C standard better. Callers changed.
+
+ * ax-gdb.c (gen_traced_pop): Add prototyped declaration.
+
+Fri May 15 18:18:38 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * tracepoint.c (stringify_collections_list): return a collection
+ of strings rather than a single string.
+ (free_actions_list): new function.
+ (encode_actions): process collection of strings returned by
+ stringify_collections_list.
+
+1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * ax-gdb.c (gen_traced_pop): New function.
+ (gen_expr): Call it for comma operator.
+ (gen_trace_for_expr): Call it, instead of writing it out.
+
+ Add facilities for sending arbitrary packets to the remote agent.
+ There are a bunch of improvements to make (make it generic; handle
+ 'O' replies properly), but I just want to get this onto the branch.
+ * remote.c (print_packet, remote_packet_command): New functions.
+ (_initialize_remote): Register the remote-packet command.
+
+Thu May 14 17:52:31 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * tracepoint.c: move actionline_type definition to tracepoint.h.
+ (validate_actionline): make non static.
+
+ * tracepoint.h: move actioline_type definition from tracepoint.c.
+ (validate_actionline) moved prototype from tracepoint.c.
+
+Thu May 14 11:49:18 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * tracepoint.c (validate_actionline): add additional error
+ checking, remove some dead code.
+ (encode_actions): additional cleanups.
+ (trace_find_command): remove some dead code.
+ (trace_find_pc_command): ditto.
+ (trace_find_tracepoint_command): ditto.
+ (trace_find_line_command): ditto.
+ (trace_find_range_command): ditto.
+ (trace_find_outside_command): ditto.
+
+Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com>
+
+ * symtab.c (decode_line_1): set section for "break *<addr>"
+
+Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com>
+
+ * corefile.c (reopen_exec_file): Reopen the exec file if
+ it has changed.
+
+Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com>
+
+ * sparc-tdep.c (fetch_instruction): New function.
+ (single_step, sparc_init_extra_frame_info, examine_prologue):
+ Use fetch_instruction instead of read_memory_integer
+ to ensure that instructions are always read as big-endian.
+
+Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Add AC_FUNC_ALLOCA.
+ * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
+ alloca.
+ * configure: Rebuild.
+start-sanitize-java
+ * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
+ targets.
+end-sanitize-java
+
+Wed May 13 11:19:08 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (trace_command): Remove old diagnostic code that was
+ preventing tracepoints from being defined with a full-path filename.
+
+Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * stabsread.c (read_one_struct_field): Check for typedef in type
+ tree before clearing bitfield information.
+
+1998-05-11 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
+ gen_mul and gen_div, and handle `%' op as well. Correctly tests
+ type of arguments.
+ (gen_expr): Factor out common code in binary arithmetic operators.
+ Add support for `%'.
+ (gen_mul, gen_div): Removed.
+
+Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com>
+
+ * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
+ %o0-%o5 as 64-bit values; compensate for stack bias.
+ (USE_STRUCT_CONVENTION): We only pass pointers to structs
+ if they're larger than 32 bytes.
+ (REG_STRUCT_HAS_ADDR): Ditto.
+
+ * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
+ instead of read_register. If the target is a sparc64 and the frame
+ pointer is odd, compensate for the stack bias.
+ (get_saved_register): Use read_sp().
+ (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
+ (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
+ save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
+ (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
+ CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
+ dummy frame.
+ (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
+ the FP is odd, compensate for stack bias.
+ (sparc_store_return_value): Right-justify the return value before
+ writing it to %o0.
+ (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
+ sparc64.
+ (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
+ sparc64_write_fp, sp64_push_arguments,
+ sparc64_extract_return_value): New functions to support the
+ sparc64 ABI.
+
+ * dwarfread.c (handle_producer): Set processing_gcc_compilation to
+ the right version number.
+
+ * dwarf2read.c (read_file_scope): Assume we're processing
+ GCC2 output.
+
+Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com)
+
+ * somsolib.c: Include gdb_stat.h.
+
+Mon May 4 18:34:01 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * ax-gdb.c (gen_mul): new function; (gen_div): new function;
+ (gen_expr): add support for * and / operators, call gen_mul and
+ gen_div as appropriate.
+
+Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com>
+
+ * defs.h (make_run_cleanup): Declare.
+ * solib.c (find_solib): Pass correct number of arguments to
+ make_run_cleanup.
+
+Mon May 4 07:08:25 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (trace_actions_command): actions command must set
+ step_count to zero (in case previous actions have set it but the
+ new set does not).
+
Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+ * ocd.h: Add new flags, function codes, and processor types to support
+ new Wiggler capabilities.
+ * (ocd_write_bytes_size): New function to allow atomic writes of
+ memory in sizes larger than a byte.
+
* ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
+Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * stabsread.c (read_one_struct_field): Do not override supplied
+ bitfield size for a range type value.
+
+ * gdbtypes.c (create_range_type): For a range with positive
+ lower limit, declare range type as unsigned.
+
Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com>
* monitor.c: Turn off debug
before running `make'.
(local-maintainer-clean, do-maintainer-clean): New rules.
+Wed Apr 29 14:02:59 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * ax-gdb.c (gen_add): when adding a pointer and an int, use
+ the size of the pointer, not the int (typo) to decide how
+ to extend the result.
+
Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com>
+start-sanitize-vr4111
* nec4102rom.c: New file implements ROM monitor adapter for
nec-vr4102 board. This board hosts the vr4111 chip. This file
- required extenstions to the monitor_ops structure, hooks for wait
+ required extensions to the monitor_ops structure, hooks for wait
filter, new flags. This version does not support more than one
breakpoint and resuming after a breakpoint in 16 bit mode is
completely disfunctional.
+end-sanitize-vr4111
* monitor.h: Defined additional hooks for dmpregs, configure_hooks
and wait_filter. These additions require that all ROM monitor
* Makefile.in: enable EXEEXT setting
+Fri Apr 24 11:53:49 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * tracepoint.c (add_local_symbols): change type of type from
+ char to int so that type shows up as 'A' or 'L' not 0.
+
start-sanitize-r5900
Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com)
* README: Minor changes for 4.17 release.
+start-sanitize-java
Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com>
* symfile.c (deduce_language_from_filename): .class implies java.
+end-sanitize-java
Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>
* configure.in (strerror): Check if function must be declared.
* acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
HAVE_LC_MESSAGES): Define.
-Wed Apr 22 21:17:35 1998 Christopher Faylor <cgf@cygnus.com>
-
- * gdbtk.c (_initialize_gdbtk): add cygwin32 specific code to
- allow `gdb -nw' to work when specified specified from a windows
- console-mode command line.
-
Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com>
* configure: Rebuilt.
Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com>
* gdbcfgxref (xref_menu): Call new regex and wild card searches
- Now you can type in a specific triple like mips64-vr4320-elf or
+ Now you can type in a specific triple like mips64-vr4300-elf or
somthing like mips*.h
(triple_search) wildcardsearch): The new functions
+start-sanitize-vr4320
* configure.tgt: Switch over to use tm-4320.h. Since I switched to
MIPS EABI the fixes are no longer backward compatible with 4300.
* tm-vr4320.h: Added
* vr4320.mt: Added
+end-sanitize-vr4320
Mon Apr 13 16:28:07 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* utils.c: (warning) added call to warning_hook
* config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
size > 8.
+Tue Mar 31 16:39:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (get_tracepoint_by_number): change warning to note.
+ (delete_trace_command): suppress y/n query if no tracepoints, or
+ if not from_tty. (trace_pass_command): reject junk at end of args.
+ (read_actions): an action list consisting only of "end" is discarded.
+ (validate_actionline (for collect command)): an argument beginning
+ with a dollar_sign but not recognized as a special argument is
+ parsed like any other expression -- if it isn't a register name,
+ it's rejected. Also reject an empty argument to while-stepping.
+ (trace_find_command): reject a negative frame number argument.
+ (_initialize_tracepoint): set $traceframe initially to -1.
+
Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com)
* rdi-share/Makefile.am, rdi-share/aclocal.m4,
* NEWS: Update for 4.17 release.
+Fri Mar 27 10:15:50 1998 David Taylor <taylor@tito.cygnus.com>
+
+ * tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
+ (encode_actions): Use the new gen_trace_for_expr function
+ instead of expr_to_address_and_size; collect registers when
+ using expressions. (clear_collection_list): Fix memory leak.
+
+1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * ax-gdb.h (gen_trace_for_expr): Add prototype.
+
+Thu Mar 26 17:24:23 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * tracepoint.c (validate_actionline): Fix memory leak.
+ (encode_actions): Fix memory leak.
+
+Thu Mar 26 16:16:55 1998 David Taylor <taylor@tito.cygnus.com>
+
+ * tracepoint.c (trace_mention): New function.
+ (trace_command): Call it.
+
+1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * ax-general.c (ax_reqs): New function.
+ * ax.h (enum agent_flaws, struct agent_reqs): New types.
+ (agent_reqs): New extern prototype. Well, actually, this was
+ there before, due to a premature checkin.
+ (struct aop_map): Add new `data_size' member.
+ * ax-general.c (aop_map): Supply its value.
+ * ax-gdb.c (agent_command): Call ax_reqs, for testing.
+
+ * ax-general.c (ax_print): If we encounter an invalid or
+ incomplete opcode, don't abort; just print an error message.
+
+ * ax-gdb.c: Generate trace bytecodes, as appropriate.
+ (trace_kludge): New variable.
+ (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
+ nicely.
+ (expr_to_agent): Ask for no trace bytecodes.
+ (gen_trace_for_expr): New function.
+ (agent_command): Call it, and display the result appropriately ---
+ no struct axs_value, so no type or kind information.
+
+ * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
+
Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* tracepoint.c (trace_status_command): Recognize a boolean return
value from the stub to indicate whether trace experiment is
- running. Export this value as a global state variable
+ running. Export this value as a global state variable.
(trace_running_p) for use by the GUI. (from Michael Snyder)
(trace_pass_command) added call to modify_tracepoint_hook.
- * tracepoint.h export trace_running_p
+ * tracepoint.h export trace_running_p.
+
+Thu Mar 26 13:08:01 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * tracepoint.c (validate_actionline): do not error out if
+ exp->elts[0].opcode is not on short line -- let
+ expr_to_address_and_size handle it.
+
+1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
+
+ * tracepoint.c: Include "ax.h", not "agentexpr.h".
+
+ * tracepoint.c (encode_actions): Call expr_to_address_and_size,
+ not simply expr_to_agent.
+
+ * ax-general.c: Comment out code in progress, so everyone else can
+ at least compile.
+
+ * gdbtypes.c: Doc fix.
+
+ * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
+ * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
+ (SFILES): Add ax-general.c, ax-gdb.c.
+ (ax_h): New variable.
+ (ax-general.o, ax-gdb.o): New rules.
start-sanitize-sky
Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
* Makefile.in: Derive SHELL from configure.
- * config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
- config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
- from SIM. This prevents dependency checking of -lm (under NT
- native builds). (It is automatically added by configure if it
- exists.)
+ * config/d10v/d10v.mt config/m32r/m32r.mt
+ config/mn10200/mn10200.mt config/mn10300/mn10300.mt
+ config/d30v/d30v.mt : Remove -lm from SIM. This prevents
+ dependency checking of -lm (under NT native builds). (It is
+ automatically added by configure if it exists.)
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
- (hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
- second, update the UI, and loop around doing this until we have hit the real
- timeout or we get data or an error. This will allow the UI to stay active
- while gdb is "blocked" talking to the target.
- - Martin M. Hunt <hunt@cygnus.com>
- (wait_for): Do reset current_timeout
- because it is only used to keep track of what the
- current timeout for the scb is.
+ (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
+ every second, update the UI, and loop around doing this until we
+ have hit the real timeout or we get data or an error. This will
+ allow the UI to stay active while gdb is "blocked" talking to the
+ target.
+ - Martin M. Hunt <hunt@cygnus.com>
+ (wait_for): Do reset current_timeout because it is only used to
+ keep track of what the current timeout for the scb is.
* top.c
- Martin M. Hunt <hunt@cygnus.com>
Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
- * config/mips/tm-vr4xxx.h: implements vr4111 as saparate from 4300
+start-sanitize-vr4111
+ * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
* config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
* configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
+end-sanitize-vr4111
* dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
TARGET_PTR_BIT rather from sizeof(char *) on host.
* Makefile.in (BISON): Don't even pretend to use yacc.
(c-exp.tab.o): Use bison -o to use a unique intermediate file.
- (jv-exp.tab.o, f-exp.tab.o, m2-exp.tab.o): Likewise.
+ (f-exp.tab.o, m2-exp.tab.o): Likewise.
+start-sanitize-java
+ (jv-exp.tab.o): Likewise.
+end-sanitize-java
Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
* config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
Remove, no longer used.
-start-sanitize-d30v
Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
Patch from Jim Wilson.
* config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
-end-sanitize-d30v
Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
* configure.in (--with-mmalloc): Add new configure arg to use the
For older changes see ChangeLog-97
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
fill-column: 74
version-control: never