+Wed Aug 19 03:07:53 1998 Richard Henderson <rth@cygnus.com>
+
+ * config/alpha/alpha-linux (XDEPFILES): Build ser-tcp.
+
+1998-08-18 Keith Seitz <keiths@cygnus.com>
+
+ * stack.c: Define new hook, selected_frame_level_changed_hook, which
+ will be called whenever the selected stack level changes.
+ (select_frame): Call the selected_frame_level_changed_hook.
+
+Tue Aug 18 18:03:42 1998 Stan Shebs <shebs@andros.cygnus.com>
+
+ * remote-rdi.c (arm_rdi_open): Pass serial device name to
+ Adp_OpenDevice, and include it in error reports.
+
+1998-08-18 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * configure.in: Add more header files to AC_CHECK_HEADERS.
+ * configure: Regenerated.
+
+ * command.c: Include wait.h or sys/wait.h if present.
+ * inftarg.c: Ditto.
+ * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
+ on autoconf test.
+ * infptrace.c: Ditto.
+
+ * expprint.c: Include ctype.h for isprint prototype.
+ * i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
+ * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
+ present, based on autoconf test.
+
+ * utils.c: Include curses.h and term.h if present.
+ (puts_debug): Change 'carriage_return' local variable to return_p
+ to avoid name clash.
+
+ * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
+ determine it with autoconf.
+ * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
+ with autoconf.
+ * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
+ with autoconf.
+ * config/i386/nm-i386v.h: Ditto.
+ * config/i386/nm-symmetry.h: Ditto.
+ * config/m88k/xm-cxux.h: Ditto.
+ * config/m88k/xm-dgux.h: Ditto.
+
+ * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
+ * config/m68k/nm-delta68.h: Removed.
+
+Fri Aug 14 11:14:03 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (set_movm_offsets): Change second argument to
+ be the actual args to movm itself. All callers changed. Only set
+ fi->fsr.regs[x] if reg X is saved by the movm instruction.
+
+Fri Aug 14 04:18:23 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+ * sol-thread.c (lwp_to_thread): Fix error message for failing
+ td_ta_map_lwp2thr call.
+ (ps_lgetLDT): Mask off upper bits in GS register when comparing
+ with selector.
+
+Wed Aug 12 16:30:01 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * remote-sim.c (simulator_command): Reset register cache after
+ simulator command.
+
+Wed Aug 12 09:00:26 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * expprint.c (dump_prefix/postfix_expression): Don't try to print type
+ expressions.
+
+Tue Aug 11 11:33:25 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
+
+ * c-typeprint.c (c_print_type): Don't crash if varstring is null.
+ * expprint.c expression.h (dump_expression): Rename to
+ dump_prefix_expression.
+ * Print out the expression in normal form. Call print_longest
+ instead of trying to do it ourselves.
+ * (dump_postfix_expression): New function, prints out the expression
+ with indentation and better formatting and interpretation.
+ * parse.c (parse_exp_1): Put calls to dump expressions under ifdef
+ MAINTENANCE_CMDS and expressiondebug variable.
+
+Thu Aug 6 13:20:02 1998 Ron Unrau <runrau@cygnus.com>
+
+ * infrun.c (wait_for_inferior): use stop_func_name instead of
+ stop_func_start to decide that no debug info exists.
+
+start-sanitize-sky
+Thu Aug 6 13:15:05 1998 Ron Unrau <runrau@cygnus.com>
+
+ * txvu-tdep.c: add VU0/1 control registers
+ * config/mips/tm-txvu.h: ditto
+
+Tue Aug 4 11:02:50 1998 Ron Unrau <runrau@cygnus.com>
+
+ * txvu-tdep.c (txvu_insert_breakpoint): make sure CPU context is
+ set to correct VU memory space.
+ (txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc
+ * config/tm-txvu.h: use new track-table address
+ Do note define BREAKPOINT_FROM_PC anymore
+
+Fri Jul 31 16:06:05 1998 Ron Unrau <runrau@cygnus.com>
+
+ * config/tm-txvu.h: use NUM_CORE_REGS instead of NUM_R5900_REGS
+ * mips-tdep.c: use NUM_CORE_REGS
+ * txvu-tdep.c: use NUM_CORE_REGS, add function prototypes
+ (txvu_insert_breakpoints): use VIF interrupt bit
+
+end-sanitize-sky
+Thu Jul 30 13:53:50 1998 Mark Alexander <marka@cygnus.com>
+
+ * mips-tdep.c (mask_address_p): New variable.
+ (mips_addr_bits_remove): Test mask_address_p to decide whether
+ to mask off the upper 32 bits of addresses.
+ (_initialize_mips_tdep): Add command to set mask_address_p.
+ (mips_call_dummy_address): New function.
+ * config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
+ call mips_call_dummy_address.
+
+1998-07-29 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * symfile.c (add_symbol_file_command): Test for the from_tty
+ parameter and avoid query when not interactive.
+
+start-sanitize-am33
+Wed Jul 29 10:39:29 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (set_movm_offsets): Do nothing for the am33
+ registers if we are not in am33 mode.
+ (mn10300_frame_chain, mn10300_frame_saved_pc): Similarly.
+ (set_machine_hook): Keep track of whether or not we're in am33 mode.
+
+end-sanitize-am33
+Mon Jul 27 16:11:42 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (remote_set_transparent_ranges): new function.
+ Send the start and end addresses of all loadable read-only
+ sections down to the trace target, so that it can treat them
+ as "transparent" (ie. don't care if they were collected or not).
+
+Mon Jul 27 15:38:07 1998 Mark Alexander <marka@cygnus.com>
+
+ * mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix
+ for setting frame address in optimized code; made unnecessary
+ by compiler fixes.
+
+Mon Jul 27 10:45:56 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * symtab.c (decode_line_1): For minimal symbol, call
+ find_pc_sect_line() to make sure the line number gets set
+ properly.
+ (print_symbol_info): Redeclare function void.
+
+1998-07-27 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The
+ stack pointer et al are synthesized from the SP_REGNUM (etc)
+ defines and should not be mentioned in REGISTER_NAMES.
+
+start-sanitize-am33
+Mon Jul 27 08:54:41 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-tdep.c (mn10300_frame_chain): Account for space saved
+ by am33 register saves.
+ (mn10300_frame_saved_pc): Similarly.
+
+end-sanitize-am33
+Fri Jul 24 14:41:19 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (encode_actions): Treat register names and simple
+ variable names as special cases and don't convert them to byte-
+ codes: these things can be collected far more efficiently
+ without invoking the bytecode interpreter.
+
+Fri Jul 24 13:32:46 1998 Mark Alexander <marka@cygnus.com>
+
+ * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
+ work on hosts of any endianness.
+ * config/i386/tm-i386v.h: Ditto.
+
+Fri Jul 24 07:41:12 1998 Mark Alexander <marka@cygnus.com>
+
+ * mn10300-tdep.c (set_movm_offsets): New helper function
+ for mn10300_analyze_prologue.
+ (mn10300_analyze_prologue): Simplify by factoring out common code.
+ Fix bugs in setting frame address for optimized code.
+ Use read_memory_nobpt instead of target_read_memory.
+
+Thu Jul 23 17:01:17 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * tracepoint.c (collect_symbol): handle LOC_ARG case.
+
+Thu Jul 23 15:07:40 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
+ in a function prologue before the SAVE instruction.
+ (sparc_frame_saved_pc): Ditto.
+ * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
+
+Thu Jul 23 14:58:09 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * i386-tdep.c (i386_get_frame_setup): Recognize function
+ prologues in code compiled with -fcheck-stack.
+
+Thu Jul 23 14:49:27 1998 Dawn Perchik <dawn@cygnus.com>
+
+ * remote-mips.c (remote_mips_insert_hw_breakpoint,
+ remote_mips_remove_hw_breakpoint): New functions for hardware
+ breakpoints on LSI targets.
+ * config/mips/tm-embed.h (target_remove_hw_breakpoint,
+ target_insert_hw_breakpoint): Define to call
+ remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
+ respectively.
+
+start-sanitize-sky
+Thu Jul 23 13:00:28 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START)
+ Changed to use addresses in kseg1 range.
+
+end-sanitize-sky
+1998-07-21 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ * source.c (print_source_lines): Print "No such file or directory"
+ just once.
+ (directory_command): same as above; resets if user issues dir.
+
+Sun Jul 19 02:11:45 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * symtab.c (decode_line_2): Instead of printing a prompt
+ and calling command_line_input() without a prompt, just
+ call it with the proper args. This makes the GUI work too.
+
+Fri Jul 17 9:26:50 1998 Ron Unrau <runrau@cygnus.com>
+
+ * blockframe.c (find_pc_sect_partial_function): allow for the possi-
+ bility of multiple symbols at the same address when finding high.
+ * breakpoint.c (resolve_sal_pc): if the function based section lookup
+ fails, try getting the section from the minimal symbol table.
+ * parse.c (write_exp_msymbol): use symbol_overlayed_address to get
+ the LMA of a minimal symbol if unmapped.
+ * symtab.c (find_line_symtab): change interface to return symtab
+ containing the best linetable found.
+ (decode_line_1): use find_line_symtab to set val.symtab. This should
+ improve support for source files with multiple symtabs.
+start-sanitize-sky
+ * tm-txvu.h: include tm-mips64.h instead of starting from scratch.
+end-sanitize-sky
+
Wed Jul 15 11:51:33 1998 Keith Seitz <keiths@cygnus.com>
* main.c (main): Fix violations of GNU coding standard.
capable target (currently only "remote") before doing anything
else.
-start-sanitize-d30v
Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
* config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
frame struct before extracting saved register offsets.
-end-sanitize-d30v
Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
* Makefile.in: Derive SHELL from configure.
* config/d10v/d10v.mt config/m32r/m32r.mt
- config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
- from SIM. This prevents dependency checking of -lm (under NT
- native builds). (It is automatically added by configure if it
- exists.)
-start-sanitize-d30v
- * config/d30v/d30v.mt: Ditto.
-end-sanitize-d30v
+ config/mn10200/mn10200.mt config/mn10300/mn10300.mt
+ config/d30v/d30v.mt : Remove -lm from SIM. This prevents
+ dependency checking of -lm (under NT native builds). (It is
+ automatically added by configure if it exists.)
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
* config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
Remove, no longer used.
-start-sanitize-d30v
Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
Patch from Jim Wilson.
* config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
-end-sanitize-d30v
Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
* configure.in (--with-mmalloc): Add new configure arg to use the
For older changes see ChangeLog-97
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
fill-column: 74
version-control: never
projects / deliverable / binutils-gdb.git / blobdiff