include ctype.h
[deliverable/binutils-gdb.git] / gdb / ChangeLog
index 86c5a8bbc690fb6ed379e745b39578241975b666..e5dbad867ae24f4b1e39dbfea024c1aae39f8fac 100644 (file)
@@ -1,5 +1,797 @@
+Wed Oct 14 18:56:28 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * infrun.c: include ctype.h.  Otherwise some machines result in
+         undefined for isdigit.
+
+Tue Oct 13 01:27:14 1992  John Gilmore  (gnu@cygnus.com)
+
+       * configure.in:  Convert m68k entries to m68* entries to handle
+       all the various m68xxx hosts and targets.
+       * config/news1000.mt:  No longer needed, same as news.mt.
+
+Fri Oct  9 18:54:37 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * config/sun3os[34].mh (NATDEPFILES): remove duplicate inftarg.o.
+
+Fri Oct  9 14:20:08 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * Makefile.in (HFILES):  Add all nm-irix3.h, nm-irix4.h,
+       nm-sun2.h, nm-mips.h.
+
+       * config/irix3.mh (NATDEPFILES):  nat-mips.o => mips-nat.o.
+
+       * Makefile.in (alldeps.mak):  Add = sign after NATDEPFILES.
+
+       * config/bigmips.mh config/littlemips.mh:  Remove mips-xdep.o.
+
+Fri Oct  9 08:41:11 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+       * xm-hppah.h: if __STDC__ is not defined, define
+       HPPA_COMPILER_BUG.
+       symtab.c (decode_line_1): avoid a bug in the HP9000/700 native
+       compiler; see the comment in the file.
+
+Fri Oct  9 04:43:43 1992  John Gilmore (gnu@cygnus.com)
+
+       First cut at support for all BSD variants on 386.
+
+       * tm-i386bsd.h, xm-i386bsd.h:  New config files.
+       * i386b-nat.c:  New native support file.
+       * configure.in:  Add host and target for i[34]86-*-bsd*.
+       * config/i386bsd.mh, config/i386bsd.mt:  New config files.
+
+Fri Oct  9 00:31:33 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       Sun2 native support (untested).
+
+       * xm-sun2.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS,
+         REGISTER_U_ADDR): removed to nm-sun2.h.
+       * nm-sun2.h: new file.
+       * config/sun2os[34].mh (XDEPFILES): infptrace.o inftarg.o
+         fork-child.o sun3-xdep.o removed.
+         (NAT_FILE, NATDEPFILES): new macros.
+
+       Mips native support.  Decstation and iris4 have been tested.
+       Iris3 has not.
+
+       * mips-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
+         fill_fpregset): removed to irix4-nat.c
+       * mips-xdep.c: removed.
+       * irix4-nat.c, mips-nat.c, nm-irix3.h, nm-irix4.h, nm-mips.h: new
+         files.
+       * procfs.c: include nm.h.
+       * xm-irix3.h (U_REGS_OFFSET, FETCH_INFERIOR_REGISTERS): removed.
+       * xm-irix4.h: bump copyright.
+       (U_REGS_OFFSET, FETCH_INFERIOR_REGISTERS, USE_PROC_FS,
+       PROC_NAME_FMT): removed.
+       * xm-mips.h (FETCH_INFERIOR_REGISTERS): removed.
+       * config/irix4.mh (XDEPFILES): removed procfs.o fork-child.o.
+       (NAT_FILE, NATDEPFILES): new macros for native support.
+       (CC): supply default compiler switches.
+       * config/irix3.mh (XDEPFILES): removed infptrace.o inftarg.o fork-child.o coredep.o.
+       (NAT_FILE, NATDEPFILES): new macros for native support.  Note that
+       irix3 is untested.
+       * config/decstation.mh (XDEPFILES): removed infptrace.o inftarg.o
+         fork-child.o mips-xdep.o coredep.o.
+         (NAT_FILE, NATDEPFILES): new macros for native support.
+
+Thu Oct  8 23:50:51 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * config/rs6000.mh (XDEPFILES): removed fork-child.o.
+       (NATDEPFILES): added fork-child.o
+       * config/sun3os3.mh (XDEPFILES): removed fork-child.o.
+       (NATDEPFILES): added fork-child.o
+       * config/sun3os4.mh (XDEPFILES): removed fork-child.o.
+       (NATDEPFILES): added fork-child.o
+
+Thu Oct  8 23:19:25 1992  John Gilmore  (gnu@cygnus.com)
+
+       * infcmd.c (path_info):  Avoid 250-char limit on printf_filtered,
+       by using puts_filtered instead.
+
+Fri Oct  9 00:28:25 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+       * remote-nindy.c (nindy_load): Replacement version from Steve
+       Chamberlain, doesn't require forking to run "strip" or "sx".
+
+Thu Oct  8 18:27:35 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * Makefile.in (HFILES):  Add nm-*.h files.
+
+Thu Oct  8 16:27:45 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * config/sun4os4.mh (XDEPFILES): fork-child.o removed.
+       (NATDEPFILES): added fork-child.o.
+
+       * doc/gdbint.texinfo: document a few more macros, create new
+         section for native macros.
+
+Thu Oct  8 13:52:46 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * Makefile.in alldeps.mak depend:  Rip out 29k/udi pending
+       resolution of copyright issues.
+
+Wed Oct  7 20:08:53 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * Makefile.in (setup-to-dist):  Remove -norecursion so that doc
+       subdir gets configured.
+
+Wed Oct  7 12:24:01 1992  Ken Raeburn  (raeburn@cygnus.com)
+
+       * Makefile.in (nindy.o): Define "STRIP" as pathname of strip
+       program.
+       * nindy-share/nindy.c (coffstrip): Use that pathname, instead of
+       searching for a "bfd_strip" program.  Also, fixed up arguments
+       passed to that program.
+
+       * tm-nindy960.h (ADDITIONAL_OPTIONS): Use "-ser" rather than "-r",
+       which is now used for something else.  Rewrite description of
+       associated parameters to match how gdb does it now.
+       (ADDITIONAL_OPTION_HELP): Fix message accordingly.
+
+       * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
+
+Tue Oct  6 14:47:11 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       NOTICE_SIGNAL_HANDLING_CHANGE macro added to the target vector as
+       to_notice_signals.
+
+       * inferior.h (proc_signal_handling_change): prototype removed.
+       * infrun.c (NOTICE_SIGNAL_HANDLING_CHANGE): default removed.
+       (handle_command): now calls target_notice_signals.
+       * procfs.c (proc_signal_handling_change): renamed to
+         procfs_notice_signals.  Now static.  Add prototype.  All callers
+         changed.
+       * target.h (struct target_ops): new field, to_notice_signals.
+       (target_notice_signals): new macro to cover new field.
+       * target.c (cleanup_target): default to_notice_signals to ignore.
+       * corelow.c (core_ops),
+       exec.c (exec_ops),
+       inftarg.c (child_ops),
+       procfs.c (procfs_ops),
+       remote-adapt.c (adapt-ops),
+       remote-eb.c (eb_ops),
+       remote-es1800.c (es1800_ops, es1800_child_ops),
+       remote-hms.c (hms_ops),
+       remote-mm.c (mm_ops),
+       remote-nindy.c (nindy_ops),
+       remote-st2000.c (st2000_ops),
+       remote-udi.c (udi_ops),
+       remote-vx.c (vx_ops, vx_run_ops),
+       remote.c (remote_ops),
+       target.c (dummy_target),
+       xcoffexec.c (exec_ops): added static initializer for
+       to_notice_signals.
+       * xm-irix4.h, xm-sysv4.h (NOTICE_SIGNAL_HANDLING_CHANGE): removed.
+
+Tue Oct  6 12:13:08 1992  John Gilmore  (gnu@cygnus.com)
+
+       * main.c (define_command):  Add forgotten initializer.
+
+Tue Oct  6 02:23:17 1992  John Gilmore  (gnu@cygnus.com)
+
+       * language.c, language.h:  Move saved_language out to global
+       expected_language.  Set expected_language when user expectation
+       changes.
+       * language.c (language_info):  Don't print type/range checking gub.
+       * main.c (main):  Set expected language.
+       (execute_command):  Check against expected language.
+       * symfile.c (set_initial_language):  Set expected language.
+
+       * configure.in, config/i386sol2.{mh,mt}:  Preliminary Solaris-x86 conf.
+
+Fri Sep  4 00:34:30 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+       A bunch of changes mostly to improve debugging of C++ programs.
+       Specifically, the calling of inferiors methods is improved.
+
+       * value.h:  New macros METHOD_PTR_IS_VIRTUAL,
+       METHOD_PTR_FROM_VOFFSET, METHOD_PTR_TO_VOFFSET to partially
+       hide the implementation details of pointer-to-method objects.
+       How to tell if the pointer points to a virtual method is
+       still very dependent on the particular compiler, but this
+       should make it easier to find the places to change.
+       * eval.c (evaluate_subexp [case OP_FUNCALL]), valprint.c
+       (val_print [case TYPE_CODE_PTR]):  Use the new METHOD_PTR_*
+       macros, instead of a hard-wired-in code that incorrectly
+       assumed a no-longerused representation of pointer-to-method
+       values.  And otherwise fix the relevant bit-rotted code.
+
+       * valprint.c (type_print_base [case TYPE_CODE_STRUCT]):
+       If there are both fields and methods, put a space between.
+
+       * stabsread.c (read_struct_type):  Fix bug in handling of
+       GNU C++ anonymous type (indicated by CPLUS_MARKER followed
+       by '_').  (It used to prematurely exit the loop reading in
+       the fields, so it would think it should start reading
+       methods while still in the fields.  This could crash gdb
+       given a gcc that can emit nested type information.)
+
+       * valops.c (search_struct_method):  Pass 'this' value by
+       reference instead of by value.  This provides a more
+       consistent interface through a recursive search where the
+       "bottom" functions may need to adjust offsets (due to multiple
+       inheritance).
+       * valops.c, value.h, values.c:  Pass extra parameters to
+       value_fn_field and value_virtual_fn_field so we can
+       correctly adjust offset for multiple inheritance.
+       * eval.c (evaluate_subexp [case OP_FUNCALL]):  Simplify
+       virtual function calls by using value_virtual_fn_field().
+       * values.c: New function baseclass_offset, derived from
+       baseclass_addr (which perhaps can be made obsolete?).
+       It returns an offset rather than an address.  This is a
+       cleaner interface since it doesn't mess around allocating
+       new values.
+       * valops.c (search_struct_method):  Use baseclass_offset
+       rather than baseclass_addr.
+
+Mon Oct  5 16:02:04 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * Makefile.in:  Re-install 29K/UDI stuff.
+       * remote-udi.c (udi_resume):  Clean up.
+       * (udi_wait):  Rewrite, leave out bugs.
+       * Add debugging code to print out all register fetches and stores.
+       * Straighten out target_ops.
+       * tm-29k.h (DUMMY_FRAME_RSIZE):  Pad out to doubleword.
+
+Mon Oct  5 09:46:44 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+       * remote-udi.c (udi_create_inferior): run with no arguments should
+       not pass the program name as an argument, since the UDI code
+       already handles that.
+       (udi_load): get the symbols from prog_name, not arg_string (the
+       load command should really use arg_string as the program name, not
+       prog_name, but at least the run command works now).
+
+       * munch: HP9000/300 nm puts an extra space between T and symbol
+       name.
+
+       * config/irix4.mh: added -lsun to XM_CLIBS to get RPC functions
+       needed for vxworks targets.
+
+Fri Oct  2 22:04:42 1992  John Gilmore  (gnu@cygnus.com)
+
+       * am29k-tdep.c (_initialize_29k):  Make it possible for the
+       user to set and query the address where function calls into the
+       inferior write a small scratch routine.  `set call_scratch_address'
+       * inferior.h (PC_IN_CALL_DUMMY):  Fix fencepost error.
+       * remote.c (remote_prepare_to_store): Only fetch regs if they are
+       not already cached validly.
+
+Thu Oct  1 14:36:42 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       Rs6000 native support.
+
+       * infptrace.c: remove #ifdef USG from around include ptrace.h.
+         machines without this header should not be compiling this file.
+       * nm-rs6000.h, rs6000-nat.c: new files for native support.
+       * rs6000-tdep.c: do not include sys/ptrace.h or sys/reg.h.
+       * rs6000-xdep.c: removed.  all code now in rs6000-nat.c.
+       * xm-rs6000.h: do not include ptrace.h.
+         (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to nm-rs6000.h.
+       * config/rs6000.mh (XDEPFILES): removed rs6000-xdep.o.
+         infptrace.o and inftarg.o move to NATDEPFIES.
+         (NAT_FILE, NATDEPFILES): new macro for native support.
+
+       Sun3 native support.
+
+       * config/sun3os3.mh, config/sun3os4.mh (NAT_FILE, NATDEPFILES):
+         new macros for native support.
+         (XDEPFILES): moved infptrace.o and inftarg.o to NATDEPFILES,
+         removed sun3-xdep.o.
+       * xm-sun3.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
+         nm-sun3.h.
+       * sun3-xdep.c: removed.  All code is now in sun3-nat.c.
+       * sun3-nat.c, nm-sun3.h: new files for native support.
+
+Thu Oct  1 10:30:54 1992  Fred Fish  (fnf@cygnus.com)
+
+       * dwarfread.c (dbsize):  New variable to hold size of dwarf info.
+       * dwarfread.c (dwarf_build_psymtabs):  Rename dbsize parameter to 
+       dbfsize and use it to initialize new local file scope dbsize.
+       * dwarfread.c (read_ofile_symtab):  Initialize dbsize and use it.
+       * dwarfread.c (basicdieinfo):  Use dbsize to check for oversize
+       DIEs as well as the current check for undersize DIEs.  This helps
+       to gracefully detect and reject corrupted DIE information.
+
+Thu Oct  1 01:57:56 1992  John Gilmore  (gnu@cygnus.com)
+
+       Add `command hooks' and a hook for inferior program stopping.
+
+       * command.h (struct cmd_list_element):  Remove unused `aux'
+       field.  Add new `hook', `hookee', and `cmd_pointer' fields.
+       * command.c (add_cmd):  Initialize new fields, elim old.
+       (add_alias_cmd):  Clone new fields.
+       (delete_cmd):  Un-hook hookee if we're deleting hook.
+       (help_cmd):  Tell user the command is hooked, if it is.
+       (lookup_cmd_1):  Abbreviations return the original command
+       instead of themselves, so that hooks on the original cmd will be
+       run.
+       * defs.h (enum command_class):  Add class_pseudo and comments.
+       * gdbcmd.h (execute_user_command):  Add prototype.
+       * infrun.c (normal_stop):  If the stop command is hooked,
+       run the hook whenever we stop.
+       (hook_stop_stub):  Stub for catch_errors.
+       (_initialize_infrun):  Set up pseudo "stop" command.
+       * main.c (execute_user_command):  Code extracted from execute_command.
+       (execute_command):  If hooked, run the hook before the command.
+       (define_command):  If defining a new hook, check the command it
+       is hooking, and warn if none.  Install the hook.
+       * source.c (_initialize_source):  "l" is an abbrev for "list".
+       * doc/gdb.texinfo:  Document command hooks.
+
+       * Makefile.in (VERSION):  Roll to 4.6.7.
+       * config/sun4os4.mh:  Remove dup inftarg.o from NATDEPFILES.
+       * infrun.c (breakpoints_inserted):  Make it static again.
+       * tm-symmetry.h (FLOAT_INFO):  #if 0 it for cross-ptrace abuse.
+
+Wed Sep 30 15:33:22 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       Native file renaming.
+
+       * nat-sparc.c -> sparc-nat.c
+       * nat-sun4os4.h -> nm-sun4os4.h
+       * nat-trash.h -> nm-trash.h
+       * config/sun4os4.mh: track file renaming.
+       * configure.in: link to nm.h rather than nat.h.
+       * infptrace.c: include nm.h rather than nat.h.
+
+Tue Sep 29 14:35:00 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       Host/target/native split for sun4.
+
+       * Makefile.in (TSOBS): removed corelow.o.
+       * infptrace.c: included nat.h.
+       * nat-trash.h: temporary header file.  This should be removed once
+         all hosts have the native/host/target split.
+       * configure.in: add a symlink from nat-trash.h to nat.h if no
+         other nat file exists for this configuration.
+       * sparc-tdep.c: no longer include sys/ptrace.h.
+       * sparc-xdep.c: removed.  contents have been moved to nat-sparc.c.
+       * xm-sparc.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
+         nat-sun4os4.h.
+       * nat-sparc.c, nat-sun4os4.h: new files for sun4 native support.
+       * config/sun4os4.mh (XDEPFILES): moved infptrace.o and inftarg.o
+         to NATDEPFILES.  removed sparc-xdep.o.
+         (NATDEPFILES, NAT_FILE): new macros for native support.
+
+       Break the direct connection from core_file_command to any
+       particular type of core file support.
+
+       * target.h (find_core_target): new prototype.
+       * target.c (find_core_target): new function.  Walks the target
+         list looking for the core target.
+       * core.c (core_file_command): replace calls to core_detach and
+         core_open with find_core_target and direct calls.
+
+Tue Sep 29 10:19:00 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+       * xm-hp300hpux.h: define MEM_FNS_DECLARED; include <sys/ptrace.h>
+       for infptrace.c.
+       config/hp300hpux.mh: ALLOCA1 was not defined.
+
+Mon Sep 28 22:03:41 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * breakpoint.c, exec.c, language.c, main.c, printcmd.c, symfile.c,
+       target.c, valprint.c:  Use unfiltered forms of f/printf, et. al.
+       until we can figure out a better way to do paging.
+
+Sat Sep 26 02:07:31 1992  John Gilmore  (gnu@cygnus.com)
+
+       * findvar.c (supply_register):  Add CLEAN_UP_REGISTER_VALUE hook.
+       * tm-hppa.h (CLEAN_UP_REGISTER_VALUE):  Use it.
+       * hppa-coredep.c:  Remove, now that we use the hook.
+       * config/hppab.mh, config/hppah.mh:  Use standard coredep.o.
+       * hppab-xdep.c, hppah-xdep.c:  Remove custom code, use hook.
+
+       * dbxread.c, partial-stab.h:  Replace all #ifdef hp9000s800's with
+       GDB_TARGET_IS_HPPA's.  This is a SERIOUS KLUDGE.  The code needs to all
+       be ripped out and reimplemented right (see elfread.c).
+       * tm-hppa.h (GDB_TARGET_IS_HPPA):  Define.
+
+       Rename all HPPA files to fit into unique DOS filenames:
+       * *hppabsd*  => *hppab*
+       * *hppahpux* => *hppah*
+
+Sat Sep 26 00:25:15 1992  John Gilmore  (gnu@cygnus.com)
+
+       Make the /proc support a target-struct in its own right.
+
+       * Makefile.in: Remove inftarg.[co], since it is now included via
+       config/*.mh files.
+       * config/*.mh:  Add inftarg.o and fork-child.o to all *.mh that
+       reference infptrace.o.  Add fork-child.o to all *.mh that
+       reference procfs.o.
+
+       * inferior.h (proc_wait, inferior_proc_init, proc_set_exec_trap):
+       No longer global functions.
+       (fork_inferior):  New global function from fork-child.c.
+       * inftarg.c (child_wait):  Remove USE_PROC_FS conditional.
+       (ptrace_me, ptrace_him):  New stub functions for fork_inferior().
+       (child_create_inferior):  Moved to fork-child.c as fork_inferior.
+       (child_create_inferior):  New tiny function that calls fork_inferior.
+       * fork-child.c:  New file, containing fork_inferior, which is
+       built from slight mods to inftarg.c's child_create_inferior.
+
+       * procfs.c (procfs_ops):  Add target vector.
+       (attach):  Rename as static do_attach.
+       (procfs_create_inferior):  New tiny function that calls fork_inferior.
+       (child_xfer_memory):  Rename to static procfs_xfer_memory.
+       (store_inferior_registers):  Rename to static procfs_store_registers.
+       (inferior_proc_init):  Rename to static procfs_init_inferior.
+       (procfs_attach, procfs_detach, procfs_prepare_to_store,
+       procfs_files_info, procfs_open, procfs_mourn_inferior,
+       procfs_can_run):  Slightly mangled copies of the corresponding
+       child_XXX routines from inftarg.c.
+       (proc_wait):  Renamed to static procfs_wait.
+       (child_resume):  Rename to static procfs_resume.
+       (fetch_inferior_registers):  Rename to static procfs_fetch_registers.
+       (initialize_proc_fs):  Rename to initialize_procfs.  Set up
+       procfs_ops, too.
+
+       * putenv.c:  index -> strchr.
+       * regex.c:  Always rename bcopy to memcpy, etc.
+       FIXME:  Eventually do the renames rather than use #define's.
+       * sparc-tdep.c (deferred_stores):  Moved from sparc-xdep.c.
+       Fix bcopy->memcpy.
+       * sparc-xdep.c:  Move deferred_stores to target dependent.
+       * xm-irix4.h, xm-sysv4.h (CREATE_INFERIOR_HOOK):  No longer needed.
+
+Fri Sep 25 21:59:27 1992  John Gilmore  (gnu@cygnus.com)
+
+       Split non-target-dependent code out of target_attach routines.
+
+       * target.h:  Comments on target_attach args and results.
+       * infcmd.c (attach_command): Check for existing execution, call
+       target_attach, set up terminal status and wait_for_inferior, wait
+       for the attach status, and do normal_stop.
+       * inftarg.c (child_attach):  Remove target independent stuff.
+       * remote-adapt.c (adapt_attach):  Ditto.
+       * remote-mm.c (mm_attach):  Ditto.
+       * remote-udi.c (udi_attach):  Ditto.
+       * remote-vx.c (vx_attach):  Ditto.
+
+       Cleanup.
+
+       * remote-hms.c (hms_attach):  Remove completely, it was useless.
+       * remote-mm.c, remote-hms.c, remote-udi.c, remote-adapt.c:  Remove
+       commented-out start_remote calls.
+       * remote-hms.c, remote-adapt.c, remote-mm.c, remote-udi.c: Remove
+       DENTER and DEXIT macros and their calls.  Use a real debugger --
+       like gdb -- to see what functions are being called when.
+       * utils.c (strcmp_iw):  Make nonstatic, for lint.
+
+Fri Sep 25 18:48:20 1992  John Gilmore  (gnu@cygnus.com)
+
+       * infrun.c, inftarg.c, inferior.h:  Comment and lint cleanups.
+
+Fri Sep 25 15:13:44 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * tm-sparc.h, dbxread.c (read_ofile_symtab):  Install Jim Wilson's
+       fix to differentiate between gcc1 & gcc2 compiled files so that we
+       can debug calls that pass structs as args correctly.
+       * symmisc.c (dump_symtab):  If block was compiled with gcc, say
+       so, and what version.
+
+       * remote.c (remote_wait):  Make regs be char to avoid picayune
+       ANSI compiler warnings.
+
+       * energize.h:  Move all external struct decls to inside of
+       __STDC__, add prototype for energize_shell_wait().
+       * energize.c (getpty):  Clean up, make us really get a controlling
+       terminal.
+       * (energize_initialize):  Disable SIGIO prior to setting up for
+       I/O interrupts.  Move setsid(), et. al. to getpty().
+       * (energize_shell_wait):  New routine to wait for things started
+       via the shell command, uses wait() instead of /dev/proc.
+       * Also, add prototype for execute_command_1().
+
+Fri Sep 25 12:09:33 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * inftarg.c (child_create_inferior, child_attach,
+         child_mourn_inferior): collect unix child process stratum
+         functions which live below the target vector into this file to
+         facilitate host/target/native split.  Also, make them static.
+       * inflow.c (child_mourn_inferior): removed.
+       * infrun.c (child_create_inferior, child_attach): removed.
+         (resume): becomes global so that functions below the
+         target vector can find it.
+       * inferior.h (resume): add prototype.
+         (child_mourn_inferior, child_create_inferior, child_attach):
+         remove prototypes.
+
+       * xcoffexec.c (exec_ops): child_attach and child_create_inferior
+         replaced with find_default_attach and
+         find_default_create_inferior.
+
+Fri Sep 25 10:21:04 1992  Ken Raeburn  (raeburn@rtl.cygnus.com)
+
+       * i960-pinsn.c: Use _filtered routines for printing, so symbolic
+       addresses don't get displayed in the wrong positions.
+
+Fri Sep 25 09:52:47 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+        Separate core functions along target vector in preparation for
+        native support.  Functions above vector now live in core.c.  Those
+        below in corelow.c.
+
+       * core.c (solib_add_stub, core_close, core_open, core_detach,
+         get_core_registers, core_files_info, core_ops): moved to corelow.c
+         (_initialize_core): removed addition of core_ops target.
+       * corelow.c: new file.
+       (solib_add_stub, core_close, core_open, core_detach,
+       get_core_registers, core_files_info, core_ops): moved from core.c
+       (_initialize_corelow): new function.
+       * gdbcore.h (core_open, core_detach): added prototypes.
+       (core_ops): add forward declaration.
+       * Makefile.in (SFILES_MAINDIR): add core.c
+       (OBS): add core.o
+       (TSOBS): change core.o to corelow.o
+
+Wed Sep 23 11:14:53 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * m68k-tdep.c (m68k_saved_pc_after_call):  Use 'GDB_TARGET_IS_SUN3'
+       instead of 'sun' predefined symbol so that trap analysis code is
+       enabled only when the TARGET is a sun3.
+
+Tue Sep 22 17:13:19 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+       * tm-i960.h (ext_format_i960): Add top-level declaration.
+       (REGISTER_CONVERT_TO_{VIRTUAL,RAW}): Don't declare it in nested
+       blocks, else Sun4 compiler complains.
+
+Tue Sep 22 00:43:51 1992  John Gilmore  (gnu@cygnus.com)
+
+       * mips-pinsn.c (print_insn_arg, case 'B'):  Disassemble `break'
+       instruction's argument.  Patch from jonathan@cs.stanford.edu
+       (Jonathan Stone).
+
+Mon Sep 21 18:16:30 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       Break the thread of control that implies that a unix child
+       process will be the default target.
+
+       * target.c (find_default_run_target, find_default_attach,
+       find_default_create_inferior, return_zero):  new functions.
+       (cleanup_target):  Make return_zero the default for to_can_run.
+
+       * exec.c (exec_ops), core.c (core_ops):  Replace child_attach and
+       child_create_inferior references with find_default_XXX instead.
+
+       * target.h (struct target_ops): new field, to_can_run.
+       (find_default_attach, find_default_create_inferior):  new prototypes.
+       (target_can_run): new macro.
+
+       * Also added a zero (default) to_can_run element to all static
+       struct target_ops initializations throughout GDB, except: 
+       * inftarg.c (child_ops): Use new child_can_run() to enable child runs.
+
+       * infrun.c (child_create_inferior):  Clean up error handling when
+       no exec file is specified.
+       (child_attach):  Don't require exec file.
+
+Mon Sep 21 19:43:13 1992  John Gilmore and K. Richard Pixley (gnu@cygnus.com)
+
+       Remove kill_inferior_fast, in favor of target_kill, which goes
+       through the target vector.
+
+       * inferior.h (kill_inferior_fast): remove declaration.
+
+       * main.c (disconnect): call quit_cover using catch_errors rather
+       than calling kill_inferior_fast directly.  New way goes through
+       the target vector, handles attached processes, and writes
+       command history if appropriate.
+       (quit_cover): new function, wrapper for quit_command.
+
+       * convex-xdep.c, go32-xdep.c, hppabsd-xdep.c, hppahpux-xdep.c,
+       infptrace.c, procfs.c:  Removed all instances of kill_inferior_fast,
+       inlining them into the local kill_inferior when needed.
+
+Mon Sep 21 19:23:05 1992  John Gilmore  (gnu@cygnus.com)
+
+       * infrun.c (_initialize_infrun):  Alias `i handle' == `i signals'.
+       * stabsread.c (read_struct_type): Simplify complicated expression
+       for dumb DECstation compiler.
+
+Mon Sep 21 14:54:35 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+       * m68k-pinsn (print_insn_arg, fetch_arg): added support for
+       operands to memory management instructions, from WRS.
+
+Sep 20 08:42:12 1992  Fred Fish  (fnf@cygnus.com)
+
+       * main.c (main):  Back out previous language setting changes.
+       Replace with simple default to C before processing any init
+       files.  There MUST be a language set, even in the absence of
+       init files or executables, or expression parsing fails.
+
+Sat Sep 19 09:52:26 1992  Fred Fish  (fnf@cygnus.com)
+
+       * main.c (main):  Move code that sets initial language to
+       symfile.c.  Fixup places where command files are processed to
+       be consistent in setting a default language if none has been
+       previously set.
+       * symfile.c (set_initial_language):  Add code moved from
+       main() that sets an initial default language when a new
+       symbol file is read.
+       * symfile.c (symbol_file_command):  Call set_initial_language.
+       * symtab.c (find_main_psymtab):  Add FIXME comment.
+
+Wed Sep 16 22:31:55 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * breakpoint.c, sparc-tdep.c: comment changes.
+       * configure.in: removed target_dependent line.
+
+       * remote-mm.c (mm_attach): change printf to error to prevent
+       fallthrough bug.
+       * remote-udi.c (udi_attach): change printf to error to prevent
+       fallthrough bug.
+
+       * rs6000-tdep.c (push_dummy_frame, pop_dummy_frame): replace
+       calls to {fetch|store}_inferior_registers with calls to
+       target_{fetch|store}_registers, for remote-target independence.
+
+Sat Sep 19 04:23:54 1992  John Gilmore  (gnu@cygnus.com)
+
+       * Makefile.in:  Fix bug I introduced in merging Rich's change.
+       * infrun.c (child_create_inferior):  Use proceed() rather than
+       doing all the same stuff by hand.
+
+Thu Sep 17 17:35:37 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * Makefile.in, configure.in: add support for files used only when
+       configured native, that is, when host = target.
+
+Wed Sep 16 23:03:23 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * tm-sparc.h, xm-sparc.h: externs and macros relating to deferred
+       stores are target dependent and were moved from xm to tm.
+
+Sat Sep 19 03:14:37 1992  John Gilmore  (gnu@cygnus.com)
+
+       * Makefile.in (gdb-all.texi):  Build in objdir, not $srcdir.
+
+       * config/decstation.mh:  Add MMALLOC_LIB and MMALLOC_DISABLE
+       overrides, to avoid problem in xdr_bytes with malloc(0) => 0.
+
+Wed Sep 16 20:04:54 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+       * target.h (struct target_ops):  removed to_convert_to_virtual and
+       to_convert_from_virtual elements.  Initializations removed from
+       all static initializations.
+       (target_convert_to_virtual, target_convert_from_virtual):
+       removed.
+       (host_convert_to_virtual, host_convert_from_virtual):  Removed
+       forward declarations.
+       * target.c (cleanup_target): removed default assignments for
+       to_convert_to_virtual and to_convert_from_virtual.
+       * inftarg.c (host_convert_to_virtual, host_convert_from_virtual):
+       removed.
+       * findvar.c (value_of_register, value_from_register):  
+       target_convert_to_virtual inlined.
+       * infcmd.c (do_registers_info):  target_convert_to_virtual inlined.
+       * valops.c (value_assign):  target_convert_from_virtual inlined.
+
+Fri Sep 18 02:07:39 1992  John Gilmore  (gnu@cygnus.com)
+
+       * main.c (gdb_readline):  Avoid printf_filtered, which sets char
+       position wrong if used for the prompt.
+       * utils.c (puts_filtered):  Comment:  NOT a puts() replacement!
+
+       Support for accessing arbitrary MIPS stack frames in memory.
+
+       * blockframe.c (get_prev_frame_info):  If INIT_FRAME_PC_FIRST is
+       set, run it before INIT_EXTRA_FRAME_INFO.
+       * stack.c (frame_info):  If PRINT_EXTRA_FRAME_INFO defined, call it.
+
+       * mips-tdep.c (init_extra_frame_info): Only clobber the `frame'
+       (FP) value in the frame_info struct if it is zero (as from top of
+       execution stack).
+       (setup_arbitrary_frame):  Implement FRAME_SPECIFICATION_DYADIC.
+
+       * mips-xdep.c (fetch_inferior_registers):  ZERO_REGNUM always
+       comes back as zero.  So does FP_REGNUM, as a trigger for
+       init_extra_frame_info.
+
+       * tm-mips.h (INIT_FRAME_PC_FIRST):  Kludge, FIXME, defined to get
+       the program counter set before INIT_EXTRA_FRAME_INFO is run.
+       (INIT_FRAME_PC):  Defined to null.
+       (PRINT_EXTRA_FRAME_INFO): print frame pointer location via symtab.
+       (FRAME_SPECIFICATION_DYADIC):  Ask for two args in frame command.
+       Briefly explain MIPS stacks in GDB.
+
+Thu Sep 17 03:49:59 1992  John Gilmore  (gnu@cygnus.com)
+
+       * copying.awk, copying.c (show_copying_command,
+       show_warranty_command):  Rename from copying_info, warranty_info,
+       to match command function conventions.
+
+       * utils.c (prompt_for_continue):  Reinitialize more-counts
+       before printing anything, and again afterward.  Fix comments.
+       (vfprintf_filtered):  Eliminate static buffer; use auto buffer,
+       or alloca() if needed.
+
+       * rs6000-xdep.c:  Use correct conditional (IBM6000_TARGET) to
+       detect native versus cross-host.
+
+Wed Sep 16 21:57:14 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * m68k-tdep.c (sun3_saved_pc_after_call):  Only do trap check for
+       Suns.  Rename to m68k_saved_pc_after_call.
+       * tm-68k-noun.h, tm-sun3.h (SAVED_PC_AFTER_CALL):  Use
+       m68k_saved... instead of sun3_saved...
+
+Wed Sep 16 17:00:07 1992  John Gilmore  (gnu@cygnus.com)
+
+       * Makefile.in (update-depend, update-alldeps): Split out of
+       setup-to-dist, for convenience in rebuilding the depend and
+       alldeps.mak files.
+       (assorted):  Update to catch straggler files when building gdb.tar.Z.
+
+Tue Sep 15 01:18:50 1992  John Gilmore  (gnu@cygnus.com)
+
+       Preliminary cleanup for splitting host/native/target.
+
+       * infptrace.c (child_resume):  Don't deal with NO_SINGLE_STEP
+       here; it is dealt with at a gdb-target-independent level.
+       * rs6000-tdep.c (single_step):  Don't call ptrace, we are a
+       high toned routine.  Fix return type to void.
+       * tm-rs6000.h (AIX_BUGGY_PTRACE_CALL): Zap, we think we fixed it.
+       Rich and I believe the "real problem" was that both single_step
+       and target_resume were issuing PT_CONTINUE calls.  This would
+       cause the second PT_CONTINUE to sometimes fail because the process
+       was already running.
+       * infptrace.c (child_resume):  Remove AIX_BUGGY_PTRACE_CALL kludge.
+
+Mon Sep 14 19:20:43 1992  Stu Grossman  (grossman at cygnus.com)
+
+       * energize.c (pty_to_kernel):  Must check for EAGAIN as
+       termination condition.
+       (full_filename):  Don't prepend dirname if filename begins with /.
+       (breakpoint_notify, kernel_dispatch):  Deal with DynamicLoad
+       messages properly!!
+       (getpty (NCR)):  Lotsa bug fixes...
+       (kernel_dispatch (case StopRType)):  Use kill() instead of
+       killpg() so we can deal with losing systems...
+       (wait_for_events):  Work around NCR select() lossage.  It doesn't
+       zero out readfds when select() returns zero.
+       (energize_initialize):  Use I_SETSIG to get SIGIO interrupts.  Use
+       getcwd() instead of getwd() (NCR getwd() seg faults).
+       (energize_wait):  Use sigaction() for NCR.  Their version of signal()
+       is unreliable by default.
+
+       * procfs.c (proc_wait):  Call print_sys_errmsg() if we get an
+       error from PIOCSWSTOP.
+
+       * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c,
+       symfile.c, target.c, valprint.c:  Use _filtered form of *printf.
+       defs.h, utils.c:  Make vfprintf_filtered global.
+
+       * energize.c (send_location):  New routine to consolidate all
+       places where we must notify kernel of where the given pc is.
+       (cplus_demangle):  Put single-quotes around demangled names.
+       (energize_call_command):  Call send_location() after doing up,
+       down, and frame commands.
+
+Fri Sep 11 18:28:28 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+       * doc/gdb.texinfo, doc/gdbinv-m.m4.in, doc/gdbinv-s.m4.in: first
+       pass at doc for two new remote targets---29K using UDI, and Tandem
+       ST2000 using STDBUG.
+
+       * doc/all.m4, doc/none.m4: new m4 switch, _ST2000__
+
+       * doc/all.m4: turn on H8/300 stuff for generic manual
+
+       * doc/gdbinv-s.m4.in: remove text on special procedures to continue 
+       after explicit call to breakpoint() in serial stubs.
+
 Fri Sep 11 01:34:25 1992  John Gilmore  (gnu@sphagnum.cygnus.com)
 
+       * mipsread.c:  Clean up some white space.
+       (parse_symbol):  Handle stEnd of stFile.
+       (parse_partial_symbols):  Remove old #if 0'd code.  Handle stLocal.
+
        * mips-xdep.c (REGISTER_PTRACE_ADDR, fetch_inferior_registers,
        store_inferior_registers):  Replace unexplained numbers
        with manifest constants from a DECstation header file.
@@ -489,7 +1281,7 @@ Sat Aug  8 23:12:22 1992  Fred Fish  (fnf@cygnus.com)
 Fri Aug  7 11:18:23 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 
        * xm-go32.h: Define LSEEK_NOT_LINEAR
-       * serial.c (find_source_lines): if LSEEK_NOT_LINEAR is defined
+       * source.c (find_source_lines): if LSEEK_NOT_LINEAR is defined
        then work out the lseek positions of newlines by running through
        the file and `tell'ing.  This makes source file listing work on
        OS's where the relationship between physical position in file and
@@ -1890,7 +2682,7 @@ Fri Apr 24 07:41:19 1992  Stu Grossman  (grossman at cygnus.com)
        rewrite, only leave out the bugs.
 
        * Makefile.in:  Add 29k/UDI support.  Improve depend.
-       * .Sanitize, alldeps.mak, configure.in, depend:  Add 29k/UDI support.
+       * alldeps.mak, configure.in, depend:  Add 29k/UDI support.
 
        * am29k-tdep.c:  Update to use new calling conventions, and misc
        symbol elements.
@@ -2926,10 +3718,10 @@ Thu Mar  5 23:56:01 1992  John Gilmore  (gnu at cygnus.com)
 
 Thu Mar  5 12:32:09 1992  Stu Grossman  (grossman at cygnus.com)
 
-       * config.sub configure.in config/.Sanitize config/mh-irix4
-       gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
+       * config.sub configure.in config/mh-irix4
+       gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
        gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
-       gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
+       gdb/xm-irix4.h gdb/config/mt-irix3
        gdb/config/mh-irix4 texinfo/configure.in:  Port to SGI Irix-4.x.
 
 Wed Mar  4 11:56:42 1992  Fred Fish  (fnf@cygnus.com)
This page took 0.031941 seconds and 4 git commands to generate.