+2013-09-17 Doug Evans <dje@google.com>
+
+ * dwarf2read.c: Move definitions of complaint functions to after
+ forward declarations of local functions.
+
+2013-09-17 Muhammad Waqas <mwaqas@codesourcery.com>
+ Pedro Alves <palves@redhat.com>
+
+ PR gdb/11568
+ * breakpoint.c (remove_threaded_breakpoints): New function.
+ (_initialize_breakpoint): Attach remove_threaded_breakpoints
+ as thread_exit observer.
+
+2013-09-17 Pedro Alves <palves@redhat.com>
+
+ PR gdb/15911
+ * ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
+ * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
+ * corelow.c (core_open):
+ * frame.h (print_stack_frame, print_frame_info): New
+ 'set_current_sal' parameter.
+ * infcmd.c (finish_command, kill_command): Adjust call to
+ print_stack_frame.
+ * inferior.c (inferior_command): Likewise.
+ * infrun.c (normal_stop): Likewise.
+ * linux-fork.c (linux_fork_context): Likewise.
+ * record-full.c (record_full_goto_entry, record_full_restore):
+ Likewise.
+ * remote-mips.c (common_open): Likewise.
+ * stack.c (print_stack_frame): New 'set_current_sal' parameter.
+ Use it.
+ (print_frame_info): New 'set_current_sal' parameter. Set the last
+ displayed sal depending on the new paremeter instead of looking at
+ print_what.
+ (backtrace_command_1, select_and_print_frame, frame_command)
+ (current_frame_command, up_command, down_command): Adjust call to
+ print_stack_frame.
+ * thread.c (print_thread_info, restore_selected_frame)
+ (do_captured_thread_select): Adjust call to print_stack_frame.
+ * tracepoint.c (tfind_1): Likewise.
+ * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
+ (mi_cmd_stack_info_frame): Likewise.
+ * mi/mi-interp.c (mi_on_normal_stop): Likewise.
+ * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
+
+2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * value.c (isvoid_internal_fn): Replace "parameter" with
+ "argument".
+
+2013-09-16 Stan Shebs <stan@codesourcery.com>
+
+ * README: Update references to writing code for GDB.
+ * configure.ac (build_warnings): Remove obsolete comment.
+ * configure: Regenerate.
+ * gdbarch.sh: Remove references to gdbint.texinfo.
+ * gdbarch.h: Regenerate.
+ * gdbtypes.c (objfile_type): Remove comments referencing internals
+ manual and D10V.
+
+2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
+
+ * NEWS: Mention new convenience function $_isvoid.
+ * value.c (isvoid_internal_fn): New function.
+ (_initialize_values): Add new convenience function $_isvoid.
+
+2013-09-16 Pierre Muller <muller@sourceware.org>
+
+ * arm-linux-tdep.c: Add "elf/common.h" header.
+ Remove AT_HWCAP macro definintion as it is provided in
+ added include file.
+ * s390-tdep.c: Remove system header <elf.h>
+ Add "elf/common.h" header for AT_HWCAP definition.
+ (s390_core_read_description): Use correct CORE_ADDR
+ for hwcap local variable used as third parameter
+ of function target_auxv_search.
+
+2013-09-14 Pierre Muller <muller@sourceware.org>
+ Tom Tromey <tromey@redhat.com>
+ Pedro Alves <palves@redhat.com>
+
+ * common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
+ mode if operating system doesn't know O_CLOEXEC.
+
+2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Code cleanup.
+ * symfile.c (reread_symbols): Move variable obfd_filename to a more
+ inner block.
+
+2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * NEWS: Mention TDB support.
+ * features/s390-tdb.xml: New file.
+ * features/s390-te-linux64.xml: New file.
+ * features/s390x-te-linux64.xml: New file.
+ * features/Makefile (WHICH): Add new tdescs above.
+ (s390-te-linux64-expedite): Set.
+ (s390x-te-linux64-expedite): Set.
+ * features/s390-te-linux64.c: New file (generated).
+ * features/s390x-te-linux64.c: New file (generated).
+ * regformats/s390-te-linux64.dat: New file (generated).
+ * regformats/s390x-te-linux64.dat: New file (generated).
+ * s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
+ (HWCAP_S390_TE): Likewise.
+ (S390_TDB_DWORD0_REGNUM): Likewise.
+ (S390_TDB_DWORD0_REGNUM): Likewise.
+ (S390_TDB_ABORT_CODE_REGNUM): Likewise.
+ (S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
+ (S390_TDB_ATIA_REGNUM): Likewise.
+ (S390_TDB_R0_REGNUM): Likewise.
+ (S390_TDB_R1_REGNUM): Likewise.
+ (S390_TDB_R2_REGNUM): Likewise.
+ (S390_TDB_R3_REGNUM): Likewise.
+ (S390_TDB_R4_REGNUM): Likewise.
+ (S390_TDB_R5_REGNUM): Likewise.
+ (S390_TDB_R6_REGNUM): Likewise.
+ (S390_TDB_R7_REGNUM): Likewise.
+ (S390_TDB_R8_REGNUM): Likewise.
+ (S390_TDB_R9_REGNUM): Likewise.
+ (S390_TDB_R10_REGNUM): Likewise.
+ (S390_TDB_R11_REGNUM): Likewise.
+ (S390_TDB_R12_REGNUM): Likewise.
+ (S390_TDB_R13_REGNUM): Likewise.
+ (S390_TDB_R14_REGNUM): Likewise.
+ (S390_TDB_R15_REGNUM): Likewise.
+ (S390_NUM_REGS): Increase.
+ (S390_IS_TDBREGSET_REGNUM): New macro.
+ (s390_regmap_tdb): Declare.
+ (s390_sizeof_tdbregset): Define.
+ (tdesc_s390_te_linux64): Declare.
+ (tdesc_s390x_te_linux64): Likewise.
+ * s390-tdep.c: Add includes for "auxv.h", <elf.h>,
+ "features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
+ (s390_regmap_tdb): New regmap.
+ (s390_supply_tdb_regset): New function.
+ (s390_tdb_regset): New regset.
+ (s390_linux64v2_regset_sections): Add TDB regset to list.
+ (s390x_linux64v2_regset_sections): Likewise.
+ (s390_regset_from_core_section): Recognize TDB core note section.
+ (s390_core_read_description): If HWCAP indicates TE support,
+ select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
+ (s390_gdbarch_init): Handle TDB regset.
+ (_initialize_s390_tdep): Initialize new tdescs.
+ * s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
+ (have_regset_tdb): New variable.
+ (s390_native_supply): Support register invalidation.
+ (fetch_regset): Invalidate registers if ptrace yields ENODATA.
+ (check_regset): Treat ENODATA as "regset exists".
+ (s390_linux_fetch_inferior_registers): Add TDB.
+ (s390_read_description): Check for TDB existence and select
+ appropriate tdesc.
+ * gdbserver/Makefile.in (clean): Add removal of new makefile
+ targets.
+ (s390-te-linux64.c): New makefile target.
+ (s390x-te-linux64.c): Likewise.
+ * gdbserver/configure.srv (srv_regobj): Append new objects
+ s390-te-linux64.o and s390x-te-linux64.o.
+ (srv_xmlfiles): Append new files s390-te-linux64.xml,
+ s390x-te-linux64.xml, and s390-tdb.xml.
+ * gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
+ declaration.
+ (tdesc_s390_te_linux64): Likewise.
+ (init_registers_s390x_te_linux64): Likewise.
+ (tdesc_s390x_te_linux64): Likewise.
+ (s390_check_regset): Treat ENODATA as "regset exists".
+ (s390_arch_setup): Add TDB regset support.
+ (initialize_low_arch): Initialize registers for new tdescs.
+
+2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
+ (S390_IS_FPREGSET_REGNUM): New macro.
+ * s390-tdep.c (s390_dwarf_regmap): Make const.
+ (regnum_is_gpr_full): New function for replacing repeated code.
+ (s390_pseudo_register_name): Use it.
+ (s390_pseudo_register_type): Likewise.
+ (s390_pseudo_register_read): Likewise.
+ (s390_pseudo_register_write): Likewise.
+ (s390_unwind_pseudo_register): Likewise.
+ (s390_regmap_gregset): New format for regmap.
+ (s390x_regmap_gregset): Likewise.
+ (s390_regmap_fpregset): Likewise.
+ (s390_regmap_upper): Likewise.
+ (s390_regmap_last_break): Likewise.
+ (s390_regmap_system_call): Likewise.
+ (s390_supply_regset): Adjust to new regmap format.
+ (s390_collect_regset): Likewise.
+ * s390-nat.c (s390_native_supply): Adjust to new regmap format.
+ (s390_native_collect): Likewise.
+ (supply_gregset): Likewise.
+ (fill_gregset): Likewise.
+ (supply_fpregset): Likewise.
+ (fill_fpregset): Likewise.
+ (fetch_regset): Likewise.
+ (store_regset): Likewise.
+ (s390_linux_fetch_inferior_registers): Likewise.
+ (s390_linux_fetch_inferior_registers): Likewise.
+
+2013-09-12 Andrew Pinski <apinski@cavium.com>
+
+ * aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
+
+2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
+
+ * config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
+
+2013-09-09 Andrew Burgess <aburgess@broadcom.com>
+
+ * top.c (quit_confirm): Remove use of deprecated_init_ui_hook.
+
+2013-09-06 Pedro Alves <palves@redhat.com>
+
+ * remote-sim.c (dump_mem, gdbsim_fetch_register)
+ (gdbsim_store_register, gdbsim_kill, gdbsim_load)
+ (gdbsim_create_inferior, gdbsim_open, gdbsim_close)
+ (gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
+ (gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
+ gdb_stdlog.
+
+2013-09-06 Pedro Alves <palves@redhat.com>
+
+ * remote-sim.c (dump_mem): Constify buf parameter.
+ gdbsim_xfer_inferior_memory): Rename to ...
+ (gdbsim_xfer_memory): ... this. Adjust interface as
+ target_xfer_partial helper.
+ (gdbsim_xfer_partial): New function.
+ (init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
+ Install a to_xfer_partial hook. Send output to gdb_stdlog.
+
+2013-09-06 Pedro Alves <palves@redhat.com>
+
+ * remote-sim.c (gdbsim_xfer_inferior_memory): Use
+ host_address_to_string, and send debug output to gdb_stdlog.
+
+2013-09-06 Ricard Wanderlof <ricardw@axis.com>
+
+ * Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
+ * configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
+ gdb_target_obs for cris target.
+ * cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
+ (cris_gdbarch_init): Move calls to
+ set_gdbarch_fetch_tls_load_module_address and
+ set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
+ Add call to gdbarch_init_osabi.
+ * cris-linux-tdep.c: New file.
+ * cris-tdep.h: New file.
+
+2013-09-06 Andrew Burgess <aburgess@broadcom.com>
+
+ * tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
+ to deprecated_init_ui_hook.
+
+2013-09-06 Andrew Burgess <aburgess@broadcom.com>
+
+ * cli/cli-interp.c (_initialize_cli_interp): Add a
+ command_loop_proc to interp_procs.
+ * event-top.c (cli_command_loop): Change signature to match
+ interp_command_loop_ftype.
+ * event-top.h (cli_command_loop): Same.
+ * interps.c (interp_new): Require every interpreter to have a
+ command_loop_proc.
+ (current_interp_command_loop): Just call the command_loop_proc on
+ the current interpreter.
+ * tui/tui-interp.c (_initialize_tui_interp): Add a
+ command_loop_proc to interp_procs.
+
+2013-09-06 Ricard Wanderlof <ricardw@axis.com>
+
+ * cris-tdep.c (cris_gdbarch_init): Add call to
+ get_gdbarch_fetch_tls_load_module_address.
+
+2013-09-06 Ricard Wanderlof <ricardw@axis.com>
+
+ * cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
+ (cris_elf_gregset_t): Rename from elf_gregset_t.
+ (crisv32_elf_gregset_t): Adjust.
+ (cris_supply_gregset, fetch_core_registers): Adjust.
+
+2013-09-06 Ricard Wanderlof <ricardw@axis.com>
+
+ * cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]
+
+2013-09-05 Andrew Burgess <aburgess@broadcom.com>
+
+ * defs.h (deprecated_command_loop_hook): Remove, including
+ references in comments.
+ * interps.c (current_interp_command_loop): No longer use
+ deprecated_command_loop_hook.
+ (clear_interpreter_hooks): Remove deprecated_command_loop_hook
+ setup.
+ * top.c (deprecated_command_loop_hook): Remove.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
+ local is now int instead of ULONGEST. Print it with %d
+ instead of paddress.
+
+2013-09-05 Tristan Gingold <gingold@adacore.com>
+
+ * MAINTAINERS: Remove avr maintainership.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * findvar.c (value_of_register): Rework in terms of
+ value_of_register_lazy.
+
+2013-09-05 Muhammad Bilal <mbilal@codesourcery.com>
+
+ * symfile.c (add_symbol_file_command): Remove trailing
+ whitespaces and blank line after comment.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ * tui/tui-regs.c (tui_register_format): Don't look at the
+ register's name here. Return string representing register
+ value instead of storing it in the data element.
+ (tui_get_register): Compare register string representations
+ instead of register value states and contents.
+
+2013-09-05 Pedro Alves <palves@redhat.com>
+
+ PR tui/15933
+ * tui/tui-regs.c (tui_show_registers): Show registers of the
+ selected frame, not the current frame.
+
+2013-09-05 Ricard Wanderlof <ricardw@axis.com>
+
+ * MAINTAINERS (Write After Approval): Add myself to the list.
+
2013-09-04 Doug Evans <dje@google.com>
* dwarf2read.c (queue_and_load_all_dwo_tus): New function.
2013-09-03 Luis Machado <lgustavo@codesourcery.com>
- * inf-child.c (inf_child_follow_fork) New parameter
+ * inf-child.c (inf_child_follow_fork): New parameter
detach_fork.
* inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
projects / deliverable / binutils-gdb.git / blobdiff