-/* This file should be run through the C preprocessor by config.gdb
- to produce the Makefile. */
-
-/* System V:
- If your system has a broken alloca(), define ALLOCA & ALLOCA1 below.
- Also, if you compile gdb with a compiler which uses the coff
- encapsulation feature (this is a function of the compiler used, NOT
- of the m-?.h file selected by config.gdb), you must make sure that
- the GNU nm is the one that is used by munch. */
-
-/* If you are compiling with GCC, make sure that either 1) You use the
- -traditional flag, or 2) You have the fixed include files where GCC
- can reach them. Otherwise the ioctl calls in inflow.c and readline.c
- will be incorrectly compiled. The "fixincludes" script in the gcc
- distribution will fix your include files up. */
-/* CC=gcc -traditional */
-CC=cc
-
-/* It is also possible that you will need to add -I/usr/include/sys to the
- CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
- is where it should be according to Posix). */
-
-YACC=bison -y -v
-/* YACC=yacc */
+##Copyright (C) 1989-1991 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# Destination directory of the software tree build
+destdir = /usr/local
+
+# Place to install binaries in the destination tree.
+bindir=$(destdir)/bin
+
+# System V: If you compile gdb with a compiler which uses the coff
+# encapsulation feature (this is a function of the compiler used, NOT
+# of the m-?.h file selected by config.gdb), you must make sure that
+# the GNU nm is the one that is used by munch.
+
+# If you are compiling with GCC, make sure that either 1) You use the
+# -traditional flag, or 2) You have the fixed include files where GCC
+# can reach them. Otherwise the ioctl calls in inflow.c
+# will be incorrectly compiled. The "fixincludes" script in the gcc
+# distribution will fix your include files up.
+#CC=cc
+#CC=gcc -traditional
+GCC=gcc
+
+VPATH=$(srcdir)
+
+# It is also possible that you will need to add -I/usr/include/sys to the
+# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
+# is where it should be according to Posix).
+
+YACC=bison -y
+# YACC=yacc
SHELL=/bin/sh
MAKE=make
-/* Set this up with gcc if you have gnu ld and the loader will print out
- line numbers for undefinded refs. */
-/* CC-LD=gcc -static */
+# Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
+# Berkeley/Sun don't have quite enough.
+#M4=/usr/5bin/m4
+M4=gm4
+# where to find texinfo; if you have PostScript fonts you may want to try
+# the Cygnus mods (which also have different header/footer layout)
+#TEXIDIR=${srcdir}/../texinfo/cygnus
+TEXIDIR=${srcdir}/../texinfo/fsf
+
+# Set this up with gcc if you have gnu ld and the loader will print out
+# line numbers for undefinded refs.
+#CC-LD=gcc -static
CC-LD=${CC}
-/* If you are using the GNU C library, uncomment the following line. */
-/* HAVE_VPRINTF_DEFINE = -DHAVE_VPRINTF */
-
-/* -I. for "#include <obstack.h>". Possibly regex.h also. */
-
-/* M_CFLAGS, if defined, has system-dependent CFLAGS. */
-#if !defined(M_CFLAGS)
-#define M_CFLAGS
-#endif
-
-/* CFLAGS for both GDB and readline. */
-GLOBAL_CFLAGS = -g M_CFLAGS
-CFLAGS = -I. ${HAVE_VPRINTF_DEFINE} ${GLOBAL_CFLAGS}
-/* None of the things in CFLAGS will do any harm, and on some systems
- (e.g. SunOS4) it is important to use the M_CFLAGS. */
+# define this to be "gmalloc.o" if you want to use the gnu malloc routine
+# (useful for debugging memory allocation problems in gdb). To use your
+# system malloc, uncomment the following two lines.
+#GNU_MALLOC =
+#MALLOC_CFLAGS = -DNO_MALLOC_CHECK
+GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
+MALLOC_CFLAGS =
+
+# Where is the "include" directory? Traditionally ../include or ./include
+INCLUDE_DIR = ${srcdir}/../include
+INCLUDE_DEP = $$(INCLUDE_DIR)
+
+# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
+# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
+BFD_DIR = ${srcdir}/../bfd
+BFD_DEP = $$(BFD_DIR)
+BFD_LIB = $(BFD_DIR)${subdir}/libbfd.a
+
+# Where is the source dir for the READLINE library? Traditionally in .. or .
+# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
+READLINE_DIR = ${srcdir}/../readline
+READLINE_DEP = $$(READLINE_DIR)
+RL_LIB = $(READLINE_DIR)${subdir}/libreadline.a
+
+# All the includes used for CFLAGS and for lint.
+# -I. for config files.
+# -I${srcdir} possibly for regex.h also.
+INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
+
+# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
+# CFLAGS for GDB
+GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
+#PROFILE_CFLAGS = -pg
+
+CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
+# None of the things in CFLAGS will do any harm, and on some systems
+# (e.g. SunOS4) it is important to use the M_CFLAGS.
LDFLAGS = $(CFLAGS)
-/*
- define this to be "obstack.o" if you don't have the obstack library installed
- you must at the same time define OBSTACK1 as "obstack.o"
- so that the dependencies work right. Similarly with REGEX and "regex.o".
- You must define REGEX and REGEX1 on USG machines.
- If your sysyem is missing alloca(), or, more likely, it's there but
- it doesn't work, define ALLOCA & ALLOCA1 */
-OBSTACK = obstack.o
-OBSTACK1 = obstack.o
-
-#ifdef M_REGEX
-REGEX = M_REGEX
-REGEX1 = M_REGEX
-#else
-REGEX =
-REGEX1 =
-#endif
-
-#ifdef M_ALLOCA
-ALLOCA = M_ALLOCA
-ALLOCA1 = M_ALLOCA
-#else
-ALLOCA =
-ALLOCA1 =
-#endif
-
-/*
- define this to be "malloc.o" if you want to use the gnu malloc routine
- (useful for debugging memory allocation problems in gdb). Otherwise, leave
- it blank. */
-/* GNU_MALLOC = */
-GNU_MALLOC = malloc.o
-
-/* Flags to be used in compiling malloc.o
- Specify range checking for storage allocation. */
-/* MALLOC_FLAGS = ${CFLAGS} */
-MALLOC_FLAGS = ${CFLAGS} -Drcheck -Dbotch=fatal_dump_core -DMSTATS
-
-/* Define SYSV if compiling on a system V or HP machine. */
-#ifdef M_SYSV
-SYSV_DEFINE = -DSYSV
-#else
-SYSV_DEFINE =
-#endif
-
-/* MUNCH_DEFINE should be -DSYSV if have System V-style nm,
- or null if have BSD-style nm. */
-#ifdef M_BSD_NM
-MUNCH_DEFINE =
-#else
-MUNCH_DEFINE = ${SYSV_DEFINE}
-#endif
-
-/* Flags that describe where you can find the termcap library.
- You may need to make other arrangements for USG. */
-TERMCAP = -ltermcap
-
-/* M_CLIBS, if defined, has system-dependent libs
- For example, -lPW for System V */
-#ifndef M_CLIBS
-#define M_CLIBS
-#endif
-CLIBS = ${ADD_FILES} ${TERMCAP} M_CLIBS
-
-ADD_FILES = ${OBSTACK} ${REGEX} ${ALLOCA} ${GNU_MALLOC}
-ADD_DEPS = ${OBSTACK1} ${REGEX1} ${ALLOCA1} ${GNU_MALLOC}
-
-SFILES = blockframe.c breakpoint.c dbxread.c coffread.c command.c core.c \
- environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
- kdb-start.c main.c printcmd.c \
- remote.c source.c stack.c standalone.c stuff.c symmisc.c symtab.c \
- utils.c valarith.c valops.c valprint.c values.c version.c expread.y \
- xgdb.c
+# Where is the "-liberty" library, containing getopt and obstack?
+LIBIBERTY_DIR = ${srcdir}/../libiberty
+LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
-DEPFILES = umax-dep.c gould-dep.c default-dep.c sun3-dep.c \
- sparc-dep.c hp9k320-dep.c hp300bsd-dep.c news-dep.c i386-dep.c \
- symmetry-dep.c convex-dep.c altos-dep.c isi-dep.c
-
-PINSNS = gld-pinsn.c i386-pinsn.c sparc-pinsn.c vax-pinsn.c m68k-pinsn.c \
- ns32k-pinsn.c convex-pinsn.c
+# Flags that describe where you can find the termcap library.
+# You may need to make other arrangements for USG.
+TERMCAP = -ltermcap
-HFILES = command.h defs.h environ.h expression.h frame.h getpagesize.h \
- inferior.h symseg.h symtab.h value.h wait.h \
- a.out.encap.h a.out.gnu.h stab.gnu.h
+# The xconfig file must define REGEX and REGEX1 on USG machines.
+# If your sysyem is missing alloca(), or, more likely, it's there but
+# it doesn't work, define ALLOCA & ALLOCA1 too.
+# If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
-OPCODES = m68k-opcode.h pn-opcode.h sparc-opcode.h npl-opcode.h vax-opcode.h \
- ns32k-opcode.h convex-opcode.h
+# Libraries and corresponding dependencies for compiling gdb.
+# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
+# TERMCAP comes last, since readline depends on it.
+CLIBS = $(XM_CLIBS) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
+CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
-MFILES = m-hp9k320.h m-hp300bsd.h m-i386.h m-i386gas.h \
- m-i386-sv32.h m-i386g-sv32.h m-isi.h m-merlin.h \
- m-altos.h m-news.h m-newsos3.h m-npl.h m-pn.h \
- m-sparc.h m-sun2.h m-sun3.h m-sun2os4.h \
- m-sun3os4.h m-sun4os4.h m-umax.h m-vax.h m-symmetry.h m-convex.h
+ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
+ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
-/* This list of files really shouldn't be in this makefile, but I can't think
- of any good way to get the readline makefile to tell us what files
- to put in our tarfile. */
-READLINE = readline.c history.c funmap.c \
- emacs_keymap.c vi_keymap.c vi_mode.c keymaps.c \
- readline.h history.h keymaps.h chardefs.h \
- inc-readline.texinfo inc-history.texinfo \
- Makefile ChangeLog
+VERSION = 3.96
+DIST=gdb-$(VERSION)
-REMOTE_EXAMPLES = remote-sa.m68k.shar remote-multi.shar
+LINT=/usr/5bin/lint
+LINTFLAGS=
-POSSLIBS = obstack.h obstack.c regex.c regex.h malloc.c alloca.c
+# Source files in the main directory.
+# Files which are included via a tconfig/* or xconfig/* file
+# should *not* be specified here; they're in "ALLDEPFILES".
+SFILES_MAINDIR = \
+ blockframe.c breakpoint.c command.c core.c \
+ environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
+ main.c printcmd.c \
+ remote.c source.c stack.c symmisc.c symtab.c symfile.c \
+ utils.c valarith.c valops.c valprint.c values.c expread.y \
+ signame.c cplus-dem.c mem-break.c target.c inftarg.c \
+ dbxread.c coffread.c \
+ ieee-float.c
+
+# Source files in subdirectories (which will be handled separately by
+# 'make gdb.tar.Z').
+# Files which are included via a tconfig/* or xconfig/* file
+# should *not* be specified here; they're in "ALLDEPFILES".
+SFILES_SUBDIR = \
+ ${srcdir}/vx-share/dbgRpcLib.h \
+ ${srcdir}/vx-share/ptrace.h \
+ ${srcdir}/vx-share/reg.h \
+ ${srcdir}/vx-share/vxTypes.h \
+ ${srcdir}/vx-share/vxWorks.h \
+ ${srcdir}/vx-share/wait.h \
+ ${srcdir}/vx-share/xdr_ld.h \
+ ${srcdir}/vx-share/xdr_ptrace.h \
+ ${srcdir}/vx-share/xdr_rdb.h \
+ ${srcdir}/vx-share/xdr_regs.h \
+ ${srcdir}/nindy-share/Makefile \
+ ${srcdir}/nindy-share/VERSION \
+ ${srcdir}/nindy-share/b.out.h \
+ ${srcdir}/nindy-share/block_io.h \
+ ${srcdir}/nindy-share/coff.h \
+ ${srcdir}/nindy-share/demux.h \
+ ${srcdir}/nindy-share/env.h \
+ ${srcdir}/nindy-share/stop.h \
+ ${srcdir}/nindy-share/ttycntl.h
+
+# All source files that go into linking GDB, except config-specified files.
+SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
+
+# All source files that lint should look at
+LINTFILES = $(SFILES) expread.tab.c init.c
+
+# Documentation source files
+SFILES_DOCDIR = \
+ ${srcdir}/doc/gdb.texinfo \
+ ${srcdir}/doc/pretex.m4 \
+ ${srcdir}/doc/none.m4 \
+ ${srcdir}/doc/all.m4 \
+ ${srcdir}/doc/gdb.alter-m4 \
+ ${srcdir}/doc/gdb.bugs-m4 \
+ ${srcdir}/doc/gdb.canned-m4 \
+ ${srcdir}/doc/gdb.cmds-m4 \
+ ${srcdir}/doc/gdb.ctl-m4 \
+ ${srcdir}/doc/gdb.data-m4 \
+ ${srcdir}/doc/gdb.emacs-m4 \
+ ${srcdir}/doc/gdb.files-m4 \
+ ${srcdir}/doc/gdb.gpl-m4 \
+ ${srcdir}/doc/gdb.install-m4 \
+ ${srcdir}/doc/gdb.inv.m-m4 \
+ ${srcdir}/doc/gdb.inv.s-m4 \
+ ${srcdir}/doc/gdb.invoc-m4 \
+ ${srcdir}/doc/gdb.rdln-m4 \
+ ${srcdir}/doc/gdb.rename-m4 \
+ ${srcdir}/doc/gdb.run-m4 \
+ ${srcdir}/doc/gdb.sample-m4 \
+ ${srcdir}/doc/gdb.src-m4 \
+ ${srcdir}/doc/gdb.stack-m4 \
+ ${srcdir}/doc/gdb.stop-m4 \
+ ${srcdir}/doc/gdb.symb-m4 \
+ ${srcdir}/doc/gdb.tgts-m4 \
+ ${srcdir}/doc/gdb.top-m4
+
+# Any additional files specified on these lines should also be added to
+# the OTHERS = definition below, so they go in the tar files.
+SFILES_STAND = $(SFILES) standalone.c
+SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
+
+# Header files that are not named in tconfig/* or xconfig/* go here.
+HFILES= breakpoint.h command.h defs.h environ.h \
+ expression.h frame.h gdbcmd.h gdbcore.h \
+ getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
+ signals.h signame.h symfile.h symtab.h \
+ target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
+ value.h
+
+# Header files for machine opcode tables.
+# when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
+# business, since they will be included in the separate includes tar file
+# rather than in the gdb tar file.
+OPCODE_DIR =
+OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
+ $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
+ $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
+ $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
+ $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
+ $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
+ $(OPCODE_DIR)tahoe-opcode.h
+
+REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
+
+MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
+ ansidecl.h gmalloc.h
+
+POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
+POSSLIBS = $(POSSLIBS_MAINDIR)
TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
-OTHERS = Makefile.dist createtags munch config.gdb ChangeLog README TAGS \
- gdb.texinfo .gdbinit COPYING expread.tab.c stab.def \
- XGDB-README copying.c Projects Convex.notes copying.awk hp-include
-
-TAGFILES = ${SFILES} ${DEPFILES} ${PINSNS} ${HFILES} ${OPCODES} ${MFILES} \
- ${POSSLIBS}
-TARFILES = ${TAGFILES} ${OTHERS} ${REMOTE_EXAMPLES}
+# tdesc-lib cannot be named simply tdesc, because if it were, GNU make
+# would try to make it from tdesc.c.
+# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
+OTHERS = Makefile Makefile.dist depend alldeps.mak Makefile.sdir \
+ createtags munch config.gdb config.status \
+ ChangeLog ChangeLog-3.x \
+ README TODO TAGS WHATS.NEW Projects \
+ .gdbinit COPYING expread.tab.c \
+ copying.c Convex.notes copying.awk \
+ saber.suppress standalone.c stuff.c kdb-start.c \
+ putenv.c
+
+# Subdirectories of gdb, which should be included in their entirety in
+# gdb-xxx.tar.Z:
+TARDIRS = doc hp-include # tests
+
+DEPFILES= ${TDEPFILES} ${XDEPFILES}
+
+SOURCES=$(SFILES) $(ALLDEPFILES)
+TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
+TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
+ ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
+TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
values.o eval.o valops.o valarith.o valprint.o printcmd.o \
- symtab.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o \
- command.o utils.o expread.o expprint.o pinsn.o environ.o version.o \
- copying.o ${READLINEOBS}
+ symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
+ command.o utils.o expread.o expprint.o environ.o version.o \
+ copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
+ inftarg.o ieee-float.o putenv.o \
+ dbxread.o coffread.o # mipsread.o
-TSOBS = core.o inflow.o dep.o
+RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
+
+TSOBS = core.o inflow.o
NTSOBS = standalone.o
NTSSTART = kdb-start.o
-RL_LIB = readline/libreadline.a
-
-/* Do some fancy trickery to produce a line like
- -DM_MAKEDEFINE="-DM_SYSV -DM_BSD_NM".
-*/
-MD=M_MAKEDEFINE
-
-/* Avoid funny things that Sun's make throws in for us. */
-/* TARGET_ARCH is supposed to get around it putting in the machine type.
- If the "things" up there really is plural, we'll need to do something
- else as well. */
-/*.c.o:
- ${CC} -c ${CFLAGS} $< */
-TARGET_ARCH=
-
-gdb : $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB}
- rm -f init.c
- ./munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
- ${CC-LD} $(LDFLAGS) -o gdb init.c $(OBS) $(TSOBS) ${RL_LIB} $(CLIBS)
-
-/* This is useful when debugging GDB, because Unix doesn't let you run GDB
- on itself without copying the executable. So "make gdb1" will make
- gdb and put a copy in gdb1, and you can run it with "gdb gdb1". */
-gdb1 : gdb
+# Prevent Sun make from putting in the machine type. Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+ ${CC} -c ${CFLAGS} $<
+
+all: gdb
+
+install: gdb
+ cp gdb $(bindir)/gdb.new
+ mv $(bindir)/gdb.new $(bindir)/gdb
+ $(M_INSTALL)
+
+init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
+ $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
+
+gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
+ ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
+ $(CLIBS)
+
+saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
+ #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
+ #load ./init.c $(SFILES)
+ #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
+ #unload ${srcdir}/nindy-share/[A-Z]*
+ #load ${srcdir}/expread.tab.c
+ #load copying.c version.c
+ #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
+ #load ${LIBIBERTY_DIR}/*.c
+ #load ${BFD_DIR}/*.c
+ #load ${READLINE_DIR}/*.c
+ #load -ltermcap
+ ##void mcheck(a) void (*a)(); { }
+ ##void mtrace() { }
+
+
+
+# This is useful when debugging GDB, because some Unix's don't let you run GDB
+# on itself without copying the executable. So "make gdb1" will make
+# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
+# Removing gdb1 before the copy is the right thing if gdb1 is open
+# in another process.
+gdb1: gdb
+ rm -f gdb1
cp gdb gdb1
-Makefile : Makefile.dist
- cp Makefile.dist tmp.c
-/* This did not work-- -Usparc became "-Usparc" became "-Usparc.
- Or something like that. */
-/* $(CC) -E >Makefile tmp.c $(MD) "-DM_MAKEDEFINE=\"$(MD)\"" */
- $(CC) -E >Makefile tmp.c $(MD) "-DM_MAKEDEFINE=$(MD)"
- -rm tmp.c
-
-xgdb : $(OBS) $(TSOBS) xgdb.o ${ADD_DEPS} ${RL_LIB}
- rm -f init.c
- ./munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) xgdb.o > init.c
- $(CC-LD) $(LDFLAGS) -o xgdb init.c $(OBS) $(TSOBS) xgdb.o \
- -lXaw -lXmu -lXt -lX11 ${RL_LIB} $(CLIBS)
-
-/* Old (pre R3) xgdb comp.
- $(CC-LD) $(LDFLAGS) -o xgdb init.c $(OBS) $(TSOBS) xgdb.o \
- -lXaw -lXt -lX11 $(CLIBS) */
-
-kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB}
+# This is a remote stub which runs under unix and starts up an
+# inferior process. This is at least useful for debugging GDB's
+# remote support.
+rapp: $(RAPP_OBS)
+ rm -f rapp_init.c
+ ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
+ ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
+
+# Support for building Makefile out of configured pieces, automatically
+# generated dependencies, etc.
+Makefiles= Makefile.sdir $(M_MAKEFILE) \
+ ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
+
+MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
+ cat - ${Makefiles} ${srcdir}/depend > Makefile
+
+Makefile: $(Makefiles)
+ $(MAKE_MAKEFILE)
+
+alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
+ rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
+ for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
+ ${srcdir}/xconfig/*[0-9A-Za-z] | \
+ grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
+ echo $$i >>allconfig.tmp; \
+ awk <$$i ' \
+ $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
+ for (i = 2; i <= NF; i++) \
+ print $$i >> "alldeps.tmp" ; \
+ } \
+ $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
+ print $$2 >> "allparam.tmp" }' ; \
+ done
+ sort <alldeps.tmp | uniq | \
+ sed -e 's/arm-convert.o/arm-convert.s/' \
+ -e 's!^Onindy.o!nindy-share/Onindy.c!' \
+ -e 's!^nindy.o!nindy-share/nindy.c!' \
+ -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
+ -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
+ -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
+ -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
+ -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
+ -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
+ -e 's/\.o/.c/' \
+ >alldeps2.tmp
+ echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
+ >>alldeps.mak;
+ grep -v / alldeps2.tmp | \
+ awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ grep / alldeps2.tmp | \
+ awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
+
+# The sed script makes everything which depends on {x,t}m.h depend on
+# config.status as well, in case someone reconfigures gdb out from
+# under an already compiled gdb.
+depend: $(SOURCES) Makefile.dist
+ @echo Ignore errors about non-existent system-supplied include files
+ @echo for systems other than the one you are using.
+ @echo "If xm.h and tm.h don't exist, the error messages saying so"
+ @echo can safely be ignored.
+ @echo Also ignore parse errors in valops.c, and any errors in
+ @echo arm-convert.s.
+ -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
+ `ls $(SOURCES) | grep -v \.h$$ |sort -u` >depend.tmp
+ <depend.tmp sed -e 's/ [xt]m.h/& config.status/g' \
+ -e 's; vx-share/; $${srcdir}/vx-share/;g' \
+ -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+ -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
+ -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
+ -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
+ -e 's; \./; $${srcdir}/;g' \
+ >depend
+ $(MAKE_MAKEFILE)
+ rm depend.tmp
+
+config.status:
+ @echo "You must configure gdb. Look at the README file for details."
+ @false
+
+# These are not generated by "make depend" because they only are there
+# for some machines.
+# But these rules don't do what we want; we want to hack the foo.o: tm.h
+# dependency to do the right thing.
+tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
+tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
+xm-news1000.h : xm-news.h
+xm-i386-sv32.h : xm-i386.h
+tm-i386gas.h: tm-i386.h
+xm-sun4os4.h : xm-sparc.h
+tm-sun4os4.h : tm-sparc.h
+
+kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
rm -f init.c
- ./munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
+ $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
$(CC) $(LDFLAGS) -c init.c $(CLIBS)
- ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o ${RL_LIB} -lc $(CLIBS)
-
-/* If it can figure out the appropriate order, createtags will make sure
- that the proper m-*, *-dep, *-pinsn, and *-opcode files come first
- in the tags list. It will attempt to do the same for dbxread.c and
- coffread.c. This makes using M-. on machine dependent routines much
- easier. */
+ ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
+ -lc $(CLIBS)
+# Put the proper machine-specific files first.
+# createtags will edit the .o in DEPFILES into .c
TAGS: ${TAGFILES}
- createtags ${TAGFILES}
+ $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
tags: TAGS
-gdb.tar: ${TARFILES}
- rm -f gdb.tar
- mkdir dist-gdb
- cd dist-gdb ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
- mkdir dist-gdb/readline
- cd dist-gdb/readline ; for i in ${READLINE} ; do ln -s ../../readline/$$i . ; done
- tar chf gdb.tar dist-gdb
- rm -rf dist-gdb
-
-/* Remove gdb.tar.Z so stupid compress doesn't ask whether we want to
- overwrite it. compress -f is not what we want, because we do want
- to know if compress would not make it smaller. */
-gdb.tar.Z: gdb.tar
- if [ -f gdb.tar.Z ]; then rm -f gdb.tar.Z; fi
- compress gdb.tar
+# FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
+gdb.tar.Z: ${TARFILES} ${TARDIRS}
+ rm -f gdb.tar; rm -rf $(DIST)
+ mkdir $(DIST)
+ cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
+ cd $(DIST); for i in ${TARDIRS}; do \
+ (mkdir $$i; cd $$i; \
+ ln -s ../../$$i/* .; \
+ rm -rf SCCS CVS.adm RCS); done
+ mkdir $(DIST)/xconfig ${DIST}/tconfig
+ cd $(DIST)/tconfig ; \
+ for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
+ mkdir $(DIST)/vx-share $(DIST)/nindy-share
+ cd $(DIST)/tconfig ; \
+ for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
+ do ln -s ../../$$i ../$$i ; done
+ tar chf - $(DIST) | compress >gdb.tar.Z
+ rm -rf $(DIST)
clean:
- rm -f ${OBS} ${TSOBS} ${NTSOBS} ${OBSTACK} ${REGEX} ${GNU_MALLOC}
- rm -f init.c init.o
+ rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
+ rm -f init.c init.o version.c
rm -f gdb core gdb.tar gdb.tar.Z make.log
rm -f gdb[0-9]
- cd readline ; make clean
+ rm -f gdb.dvi rdl-apps.texinfo gdb-all*
distclean: clean expread.tab.c TAGS
- rm -f dep.c opcode.h param.h pinsn.c config.status
+ rm -f tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f ${TESTS} Makefile
realclean: clean
rm -f expread.tab.c TAGS
- rm -f dep.c opcode.h param.h pinsn.c config.status
+ rm -f tm.h xm.h config.status
rm -f Makefile
-xgdb.o : defs.h param.h symtab.h frame.h
-
-/* Make copying.c from COPYING */
+rdl-apps.texinfo: ${READLINE_DIR}/inc-readline.texinfo \
+ ${READLINE_DIR}/inc-history.texinfo
+ echo "@include ${READLINE_DIR}/inc-readline.texinfo" >rdl-apps.texinfo
+ echo "@include ${READLINE_DIR}/inc-history.texinfo" >>rdl-apps.texinfo
+
+gdb-all.texinfo: ${SFILES_DOCDIR}
+ ( cd $(srcdir)/doc; \
+ ${M4} pretex.m4 none.m4 all.m4 gdb.texinfo ) >gdb-all.texinfo
+
+gdb.dvi : gdb-all.texinfo rdl-apps.texinfo
+ TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
+ texindex gdb-all.??
+ TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
+ mv gdb-all.dvi gdb.dvi
+ rm -f gdb-all.?? gdb-all.???
+
+# This should work eventually, but we're using texinfo2, and many makeinfo's
+# can't cope with all the markup. In the meantime, we distribute the info
+# files as formatted by the elisp texinfo2 code.
+#gdb.info: gdb-all.texinfo
+# makeinfo gdb-all.texinfo
+
+# Make copying.c from COPYING
copying.c : COPYING copying.awk
awk -f copying.awk < COPYING > copying.c
-expread.tab.c : expread.y
+version.c : Makefile.dist
+ echo 'char *version = "$(VERSION)";' >version.c
+
+${srcdir}/expread.tab.c : $(srcdir)/expread.y
@echo 'Expect 4 shift/reduce conflict.'
- ${YACC} expread.y
- mv y.tab.c expread.tab.c
+ ${YACC} $(srcdir)/expread.y
+ mv y.tab.c ${srcdir}/expread.tab.c
-expread.o : expread.tab.c defs.h param.h symtab.h frame.h expression.h
- $(CC) -c ${CFLAGS} expread.tab.c
+expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
+ frame.h expression.h
+ $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
mv expread.tab.o expread.o
-readline/libreadline.a : force_update
- cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}" \
- "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a
+# dbxread, coffread, mipsread have dependencies on BFD header files.
+dbxread.o: ${srcdir}/dbxread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
+
+coffread.o: ${srcdir}/coffread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
+
+mipsread.o: ${srcdir}/mipsread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
+
+# Drag in the files that are in another directory.
+
+xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
+
+xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
+
+xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
+
+xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
+
+nindy.o: ${srcdir}/nindy-share/nindy.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
+
+Onindy.o: ${srcdir}/nindy-share/Onindy.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
+
+ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
+
+ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
+
+tdesc-lib/libdc.o : force_update
+ cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
+
+lint: $(LINTFILES)
+ $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
+
+gdb.cxref: $(SFILES)
+ cxref -I. $(SFILES) >gdb.cxref
force_update :
-/* Only useful if you are using the gnu malloc routines. */
-malloc.o : malloc.c
- ${CC} -c ${MALLOC_FLAGS} malloc.c
-
-/* dep.o depends on config.status in case someone reconfigures gdb out
- from under an already compiled gdb. */
-dep.o : dep.c config.status defs.h param.h frame.h inferior.h obstack.h \
- a.out.encap.h
-
-/* pinsn.o depends on config.status in case someone reconfigures gdb out
- from under an already compiled gdb. */
-pinsn.o : pinsn.c config.status defs.h param.h symtab.h obstack.h symseg.h \
- frame.h opcode.h
-
-/* The rest of this is a standard dependencies list (hand edited output of
- cpp -M). It does not include dependencies of .o files on .c files. */
-/* All files which depend on config.status also depend on param.h in case
- someone reconfigures gdb out from under an already compiled gdb. */
-blockframe.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h
-breakpoint.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h
-coffread.o : defs.h param.h config.status
-command.o : command.h defs.h
-core.o : defs.h param.h config.status a.out.encap.h
-dbxread.o : param.h config.status defs.h symtab.h obstack.h symseg.h a.out.encap.h \
- stab.gnu.h
-environ.o : environ.h
-eval.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h expression.h
-expprint.o : defs.h symtab.h obstack.h symseg.h param.h config.status expression.h
-findvar.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h value.h
-infcmd.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h inferior.h \
- environ.h value.h
-inflow.o : defs.h param.h config.status frame.h inferior.h
-infrun.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h inferior.h \
- wait.h
-kdb-start.o : defs.h param.h config.status
-main.o : defs.h command.h param.h config.status
-malloc.o : getpagesize.h
-obstack.o : obstack.h
-printcmd.o : defs.h param.h config.status frame.h symtab.h obstack.h symseg.h value.h \
- expression.h
-regex.o : regex.h
-remote.o : defs.h param.h config.status frame.h inferior.h wait.h
-source.o : defs.h symtab.h obstack.h symseg.h param.h config.status
-stack.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h
-standalone.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h \
- inferior.h wait.h
-symmisc.o : defs.h symtab.h obstack.h symseg.h obstack.h
-symtab.o : defs.h symtab.h obstack.h symseg.h param.h config.status obstack.h
-utils.o : defs.h param.h config.status
-valarith.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h expression.h
-valops.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h frame.h \
- inferior.h
-valprint.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h
-values.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h
-
-robotussin.h : getpagesize.h
-symtab.h : obstack.h symseg.h
-a.out.encap.h : a.out.gnu.h
+# When used with GDB, the demangler should never look for leading
+# underscores because GDB strips them off during symbol read-in. Thus
+# -Dnounderscore.
+cplus-dem.o : cplus-dem.c
+ ${CC} -c ${CFLAGS} -Dnounderscore \
+ `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
projects / deliverable / binutils-gdb.git / blobdiff