# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
-COMPILE.pre = $(CXX) $(CXX_DIALECT)
+COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
COMPILE.post = -c -o $@
COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
POSTCOMPILE = @true
SUBDIR_PYTHON_CFLAGS =
SUBDIR_UNITTESTS_SRCS = \
+ unittests/array-view-selftests.c \
+ unittests/common-utils-selftests.c \
+ unittests/environ-selftests.c \
unittests/function-view-selftests.c \
unittests/offset-type-selftests.c \
unittests/optional-selftests.c \
unittests/ptid-selftests.c \
- unittests/scoped_restore-selftests.c
+ unittests/scoped_restore-selftests.c \
+ unittests/xml-utils-selftests.c
SUBDIR_UNITTESTS_OBS = \
+ array-view-selftests.o \
+ common-utils-selftests.o \
+ environ-selftests.o \
function-view-selftests.o \
offset-type-selftests.o \
optional-selftests.o \
ptid-selftests.o \
- scoped_restore-selftests.o
+ scoped_restore-selftests.o \
+ xml-utils-selftests.o
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
CONFIG_CLEAN = @CONFIG_CLEAN@
CONFIG_INSTALL = @CONFIG_INSTALL@
CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
+CONFIG_SRC_SUBDIR = @CONFIG_SRC_SUBDIR@
HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
# -I. for config files.
# All target-dependent objects files that require 64-bit CORE_ADDR
# (used with --enable-targets=all --enable-64-bit-bfd).
ALL_64_TARGET_OBS = \
- aarch64-insn.o \
+ aarch64-fbsd-tdep.o \
aarch64-linux-tdep.o \
aarch64-newlib-tdep.o \
aarch64-tdep.o \
amd64-sol2-tdep.o \
amd64-tdep.o \
amd64-windows-tdep.o \
+ arch/aarch64-insn.o \
+ arch/amd64.o \
ia64-linux-tdep.o \
ia64-tdep.o \
ia64-vms-tdep.o \
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
arc-tdep.o \
- arm.o \
+ arch/arm.o \
+ arch/arm-get-next-pcs.o \
+ arch/arm-linux.o \
+ arch/i386.o \
arm-bsd-tdep.o \
- arm-get-next-pcs.o \
- arm-linux.o \
+ arm-fbsd-tdep.o \
arm-linux-tdep.o \
arm-nbsd-tdep.o \
arm-obsd-tdep.o \
xtensa-linux-tdep.o \
xtensa-tdep.o
-# Host-dependent makefile fragment comes in here.
-@host_makefile_frag@
-# End of host-dependent makefile fragment
+# The following native-target dependent variables are defined on
+# configure.nat.
+NAT_FILE = @NAT_FILE@
+NATDEPFILES = @NATDEPFILES@
+NAT_CDEPS = @NAT_CDEPS@
+LOADLIBES = @LOADLIBES@
+MH_CFLAGS = @MH_CFLAGS@
+XM_CLIBS = @XM_CLIBS@
+NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
+HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
+
+# Native-target dependent makefile fragment comes in here.
+@nat_makefile_frag@
+
+# End of native-target dependent variables.
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
agent.c \
annotate.c \
arch-utils.c \
+ arch/i386.c \
auto-load.c \
auxv.c \
ax-gdb.c \
gdb_bfd.c \
gdb-dlfcn.c \
gdb_obstack.c \
+ gdb_regex.c \
gdb_usleep.c \
gdbarch.c \
+ gdbarch-selftests.c \
gdbtypes.c \
gnu-v2-abi.c \
gnu-v3-abi.c \
parse.c \
printcmd.c \
probe.c \
+ producer.c \
proc-service.list \
progspace.c \
+ progspace-and-thread.c \
prologue-value.c \
psymtab.c \
record.c \
reverse.c \
rust-exp.y \
rust-lang.c \
- selftest.c \
selftest-arch.c \
sentinel-frame.c \
ser-base.c \
common/fileio.c \
common/filestuff.c \
common/format.c \
+ common/job-control.c \
+ common/gdb_tilde_expand.c \
common/gdb_vecs.c \
common/new-op.c \
common/print-utils.c \
common/ptid.c \
common/rsp-low.c \
common/run-time-clock.c \
+ common/selftest.c \
common/signals.c \
common/signals-state-save-restore.c \
common/vec.c \
proc-utils.h \
procfs.h \
progspace.h \
+ progspace-and-thread.h \
prologue-value.h \
psympriv.h \
psymtab.h \
xtensa-tdep.h \
arch/aarch64-insn.h \
arch/arm.h \
+ arch/i386.h \
cli/cli-cmds.h \
cli/cli-decode.h \
cli/cli-script.h \
common/common-debug.h \
common/common-defs.h \
common/common-exceptions.h \
+ common/common-gdbthread.h \
common/common-regcache.h \
common/common-types.h \
common/common-utils.h \
+ common/job-control.h \
common/errors.h \
common/environ.h \
common/fileio.h \
common/format.h \
common/gdb_assert.h \
+ common/gdb_tilde_expand.h \
common/gdb_locale.h \
common/gdb_setjmp.h \
common/gdb_signals.h \
common/gdb_termios.h \
common/gdb_vecs.h \
common/gdb_wait.h \
+ common/common-inferior.h \
common/host-defs.h \
common/print-utils.h \
common/ptid.h \
nat/amd64-linux-siginfo.h \
nat/gdb_ptrace.h \
nat/gdb_thread_db.h \
+ nat/fork-inferior.h \
nat/linux-btrace.h \
nat/linux-namespaces.h \
nat/linux-nat.h \
common-agent.o \
common-debug.o \
common-exceptions.o \
+ job-control.o \
common-regcache.o \
common-utils.o \
complaints.o \
f-typeprint.o \
f-valprint.o \
fileio.o \
+ filename-seen-cache.o \
filestuff.o \
filesystem.o \
findcmd.o \
frame-unwind.o \
gcore.o \
gdb_bfd.o \
+ gdb_tilde_expand.o \
gdb-dlfcn.o \
gdb_obstack.o \
+ gdb_regex.o \
gdb_usleep.o \
gdb_vecs.o \
gdbarch.o \
+ gdbarch-selftests.o \
gdbtypes.o \
gnu-v2-abi.o \
gnu-v3-abi.o \
print-utils.o \
printcmd.o \
probe.o \
+ producer.o \
progspace.o \
+ progspace-and-thread.o \
prologue-value.o \
psymtab.o \
ptid.o \
ui-out.o \
user-regs.o \
utils.o \
- utils-selftests.o \
valarith.o \
valops.o \
valprint.o \
$(POSTCOMPILE)
# Rules for compiling .c files in the various source subdirectories.
-%.o: ${srcdir}/arch/%.c
- $(COMPILE) $<
- $(POSTCOMPILE)
-
%.o: $(srcdir)/cli/%.c
$(COMPILE) $<
$(POSTCOMPILE)
rm -f test-cp-name-parser$(EXEEXT)
rm -f xml-builtin.c stamp-xml
rm -f $(DEPDIR)/*
+ for i in $(CONFIG_SRC_SUBDIR); do \
+ rm -f $$i/*.o; \
+ rm -f $$i/$(DEPDIR)/*; \
+ done
# This used to depend on c-exp.c m2-exp.c TAGS
# I believe this is wrong; the makefile standards for distclean just
rm -f config.log config.cache
rm -f Makefile
rm -rf $(DEPDIR)
+ for i in $(CONFIG_SRC_SUBDIR); do \
+ rmdir $$i/$(DEPDIR); \
+ done
maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
realclean: maintainer-clean
else true ; fi ; \
done
-Makefile: Makefile.in config.status @frags@
+Makefile: Makefile.in config.status
# Regenerate the Makefile and the tm.h / nm.h links.
CONFIG_FILES="Makefile" \
CONFIG_COMMANDS= \
CONFIG_HEADERS= \
$(SHELL) config.status
-$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status @frags@
+$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
@cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
CONFIG_LINKS= \
$(SHELL) config.status
-data-directory/Makefile: data-directory/Makefile.in config.status @frags@
+data-directory/Makefile: data-directory/Makefile.in config.status
CONFIG_FILES="data-directory/Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
MAKEOVERRIDES =
ALLDEPFILES = \
+ aarch64-fbsd-nat.c \
+ aarch64-fbsd-tdep.c \
aarch64-linux-nat.c \
aarch64-linux-tdep.c \
aarch64-newlib-tdep.c \
arc-tdep.c \
arm.c \
arm-bsd-tdep.c \
+ arm-fbsd-nat.c \
+ arm-fbsd-tdep.c \
arm-get-next-pcs.c \
arm-linux.c \
arm-linux-nat.c \
# Some files need explicit build rules (due to -Werror problems) or due
# to sub-directory fun 'n' games.
-# FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
-# errors. It turns out that that is the least of monitor.c's
-# problems. The function print_vsprintf appears to be using
-# va_arg(long) to extract CORE_ADDR parameters - something that
-# definitly will not work. "monitor.c" needs to be rewritten so that
-# it doesn't use format strings and instead uses callbacks.
-monitor.o: $(srcdir)/monitor.c
- $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
- $(COMPILE.post) $(srcdir)/monitor.c
- $(POSTCOMPILE)
-
# Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
# checks format strings.
printcmd.o: $(srcdir)/printcmd.c
# into place if the compile succeeds. We need this because gcc does
# not atomically write the dependency output file.
override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
- -MF $(DEPDIR)/$(basename $(@F)).Tpo
-override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
- $(DEPDIR)/$(basename $(@F)).Po
+ -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
+override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
+ $(@D)/$(DEPDIR)/$(basename $(@F)).Po
else
override COMPILE.pre = source='$<' object='$@' libtool=no \
- DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
+ $(CXX) -x c++ $(CXX_DIALECT)
# depcomp handles atomicity for us, so we don't need a postcompile
# step.
override POSTCOMPILE =
projects / deliverable / binutils-gdb.git / blobdiff