infodir = @infodir@
includedir = @includedir@
-SHELL = /bin/sh
-EXEEXT = # @EXEEXT@ # This isn't getting substituted in correctly :-(
+# This can be referenced by `INTLDEPS' as computed by CY_GNU_GETTEXT.
+top_builddir = .
+
+SHELL = @SHELL@
+EXEEXT = @EXEEXT@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
RANLIB = @RANLIB@
AWK = @AWK@
DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
srcdir = @srcdir@
VPATH = @srcdir@
-YACC=@YACC@
+BISON=@YACC@
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE_CFLAGS = -I$(READLINE_SRC)
+WARN_CFLAGS = @WARN_CFLAGS@
+
+# Where is the INTL library? Typically in ../intl.
+INTL_DIR = ../intl
+INTL = @INTLLIBS@
+INTL_DEPS = @INTLDEPS@
+INTL_SRC = $(srcdir)/$(INTL_DIR)
+INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
+
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
TCL = @TCL_LD_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@
TCL_CFLAGS = @TCLHDIR@
TCL_DEPS =
+GDBTKLIBS = @GDBTKLIBS@
# Where is the TK library? Typically in ../tk.
TK = @TK_BUILD_LIB_SPEC@
WIN32LIBS = @WIN32LIBS@
ENABLE_GDBTK= @ENABLE_GDBTK@
+#start-sanitize-ide
ENABLE_IDE= @ENABLE_IDE@
-LIBGUI = ../libgui/src/libgui.a
-
-GUI_CFLAGS_X = -I$(srcdir)/../libgui/src
-
-IDE_CFLAGS_X = -I$(srcdir)/../libide/src \
- `if [ x"$(ENABLE_IDE)" != x ] ; then \
- echo -DIDE -I$(srcdir)/../ilu/runtime/mainloop;\
- fi`
-
-LIBIDE = ../libide/src/libide.a
-
-IDE_X = ` \
- if [ x"$(ENABLE_IDE)" != x ] ; then \
- echo -L../ilu/runtime/mainloop -lilu-Tk -L../ilu/runtime/c -lilu-c -L../ilu/runtime/kernel -lilu;\
- fi`
-
-IDE_DEPS = ../ilu/runtime/mainloop/libilu-Tk.a \
- ../ilu/runtime/c/libilu-c.a ../ilu/runtime/kernel/libilu.a
-
+FOUNDRY_LIB_BASE= @FOUNDRY_LIB_BASE@
+LIBGUI = @LIBGUI@
+GUI_CFLAGS_X = @GUI_CFLAGS_X@
+IDE_CFLAGS_X = @IDE_CFLAGS_X@
+IDE_X = @IDE_X@
+LIBIDETCL = @LIBIDETCL@
+LIBIDE = @LIBIDE@
+IDE_DEPS = @IDE_DEPS@
IDE=$(IDE_X)
IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
+#end-sanitize-ide
#end-sanitize-gdbtk
ENABLE_CFLAGS= @ENABLE_CFLAGS@
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
- $(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(ENABLE_CFLAGS)
+ $(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
+ $(INTL_CFLAGS) $(ENABLE_CFLAGS) $(WARN_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
# If you have the Cygnus libraries installed,
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty \
- $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
- -lmmalloc -liberty
-CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(LIBIBERTY) \
- $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
+ $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+ -lmmalloc -lintl -liberty
+CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(INTL) $(LIBIBERTY) \
+ $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
$(MMALLOC) $(LIBIBERTY) $(WIN32LIBS)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
- $(OPCODES) $(MMALLOC) $(LIBIBERTY) @CONFIG_DEPS@
+ $(OPCODES) $(MMALLOC) $(INTL_DEPS) $(LIBIBERTY) @CONFIG_DEPS@
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION=4.16.2
+VERSION=4.17.1
DIST=gdb
LINT=/usr/5bin/lint
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
-REMOTE_OBS = remote.o dcache.o remote-utils.o tracepoint.o
+REMOTE_OBS = remote.o dcache.o remote-utils.o tracepoint.o ax-general.o ax-gdb.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS =
# Links made at configuration time should not be specified here, since
# SFILES is used in building the distribution archive.
-SFILES = bcache.c blockframe.c breakpoint.c buildsym.c c-exp.y \
- c-lang.c c-typeprint.c c-valprint.c ch-exp.c ch-lang.c \
- ch-typeprint.c ch-valprint.c coffread.c command.c complaints.c \
- corefile.c cp-valprint.c \
- dbxread.c demangle.c dwarfread.c dwarf2read.c \
- elfread.c environ.c eval.c expprint.c \
- f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c \
- gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+SFILES = ax-general.c ax-gdb.c bcache.c blockframe.c breakpoint.c \
+ buildsym.c c-exp.y c-lang.c c-typeprint.c c-valprint.c \
+ ch-exp.c ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
+ command.c complaints.c corefile.c cp-valprint.c dbxread.c \
+ demangle.c dwarfread.c dwarf2read.c elfread.c environ.c eval.c \
+ expprint.c f-exp.y f-lang.c f-typeprint.c f-valprint.c \
+ findvar.c gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+ $(start-sanitize-java) \
jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
+ $(end-sanitize-java) \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
- printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c scm-valprint.c \
- source.c stabsread.c stack.c symfile.c symmisc.c \
- symtab.c target.c thread.c top.c \
- tracepoint.c typeprint.c utils.c \
- valarith.c valops.c valprint.c values.c \
+ printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c \
+ scm-valprint.c source.c stabsread.c stack.c symfile.c \
+ symmisc.c symtab.c target.c thread.c top.c tracepoint.c \
+ typeprint.c utils.c valarith.c valops.c valprint.c values.c \
serial.c ser-unix.c mdebugread.c os9kread.c
LINTFILES = $(SFILES) $(YYFILES) @CONFIG_SRCS@ init.c
inferior_h = inferior.h $(breakpoint_h)
tracepoint_h = tracepoint.h
+ax_h = ax.h
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
gdb-stabs.h $(inferior_h) language.h minimon.h monitor.h \
objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
- c-lang.h ch-lang.h f-lang.h jv-lang.h m2-lang.h \
+ c-lang.h ch-lang.h f-lang.h \
+ $(start-sanitize-java) \
+ jv-lang.h \
+ $(end-sanitize-java) \
+ m2-lang.h \
complaints.h valprint.h \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
dbxread.o coffread.o elfread.o \
dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
c-lang.o ch-exp.o ch-lang.o f-lang.o \
- jv-lang.o jv-valprint.o jv-typeprint.o m2-lang.o \
+ $(start-sanitize-java) \
+ jv-lang.o jv-valprint.o jv-typeprint.o \
+ $(end-sanitize-java) \
+ m2-lang.o \
scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
SUBDIRS = doc \
testsuite \
- $(start-sanitize-mswin) \
- mswin \
- $(end-sanitize-mswin) \
nlm
# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.tab.c jv-exp.tab.c f-exp.tab.c m2-exp.tab.c
-YYOBJ = c-exp.tab.o jv-exp.tab.o f-exp.tab.o m2-exp.tab.o
+YYFILES = c-exp.tab.c \
+ $(start-sanitize-java) \
+ jv-exp.tab.c \
+ $(end-sanitize-java) \
+ f-exp.tab.c m2-exp.tab.c
+YYOBJ = c-exp.tab.o \
+ $(start-sanitize-java) \
+ jv-exp.tab.o \
+ $(end-sanitize-java) \
+ f-exp.tab.o m2-exp.tab.o
# Things which need to be built when making a distribution.
$(SHELL) $(srcdir)/../mkinstalldirs \
$(datadir)/gdbtcl/images \
$(datadir)/gdbtcl/images2 ; \
+ $(SHELL) $(srcdir)/../mkinstalldirs $(datadir)/gdbtcl/help \
+ $(datadir)/gdbtcl/help/images \
+ $(datadir)/gdbtcl/help/trace ; \
cd $(srcdir)/gdbtcl2 ; \
- for i in *.tcl images/*.gif images2/*.gif tclIndex; \
+ for i in *.tcl images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/index.toc help/trace/*.html help/trace/index.toc help/images/*.gif; \
do \
$(INSTALL_DATA) $$i $(datadir)/gdbtcl/$$i ; \
done ;
@echo '#include "ansidecl.h"' >>init.c-tmp
@echo 'extern void initialize_all_files PARAMS ((void));' >>init.c-tmp
@echo 'void initialize_all_files PARAMS ((void)) {' >>init.c-tmp
- @echo $(OBS) $(TSOBS) | \
+ @-echo $(OBS) $(TSOBS) | \
tr ' ' '\012' | \
sed -e '/^Onindy.o/d' \
-e '/^nindy.o/d' \
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
- #unload $(srcdir)/c-exp.y $(srcdir)/jv-exp.y $(srcdir)/m2-exp.y
+ #unload $(srcdir)/c-exp.y
+ $(start-sanitize-java)
+ #unload $(srcdir)/jv-exp.y
+ $(end-sanitize-java)
+ #unload $(srcdir)/m2-exp.y
#unload vx-share/*.h
#unload nindy-share/[A-Z]*
- #load c-exp.tab.c jv-exp.tab.c m2-exp.tab.c
+ #load c-exp.tab.c
+ $(start-sanitize-java)
+ #load jv-exp.tab.c
+ $(end-sanitize-java)
+ #load m2-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
#load ../bfd/libbfd.a
#load ../readline/libreadline.a
#load ../mmalloc/libmmalloc.a
+ #load ../intl/libintl.a
#load -ltermcap
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
rm -f gdb1$(EXEEXT)
cp gdb$(EXEEXT) gdb1$(EXEEXT)
-### fixme - this can't be right.
-# This checks the configure.in file versus the config/ directory.
-config-check: config-check-hosts config-check-targets
-config-check-hosts:
- grep gdb_host= $(srcdir)/configure.in | \
- sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
- (cd $(srcdir)/config; ls *.mh) >HOSTdir.o
- diff -u HOSTconf.o HOSTdir.o
-
-### fixme - nor can this.
-config-check-targets:
- grep gdb_target= $(srcdir)/configure.in | \
- sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
- (cd $(srcdir)/config; ls *.mt) >TARGdir.o
- diff -u HOSTconf.o HOSTdir.o
-
# FIXME. These are not generated by "make depend" because they only are there
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
rm -f config.log config.cache
rm -f Makefile
-maintainer-clean realclean: distclean clean
+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
+realclean: maintainer-clean
+
+local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
- @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f c-exp.tab.c jv-exp.tab.c f-exp.tab.c m2-exp.tab.c
+ rm -f c-exp.tab.c \
+ $(start-sanitize-java)
+ jv-exp.tab \
+ $(end-sanitize-java)
+ f-exp.tab.c m2-exp.tab.c
rm -f TAGS $(INFOFILES)
+ rm -f $(YYFILES)
rm -f nm.h tm.h xm.h config.status
+do-maintainer-clean:
+ @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" \
+ subdir_do
+
diststuff: $(DISTSTUFF)
cd doc; $(MAKE) $(MFLAGS) all-doc
# Makefile.in, but that was a pretty big annoyance.
c-exp.tab.o: c-exp.tab.c
c-exp.tab.c: c-exp.y
- $(YACC) $(YFLAGS) $(srcdir)/c-exp.y
+ $(BISON) $(YFLAGS) -o c-exp.tmp $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
-e '/^#line.*y.tab.c/d' \
- < y.tab.c > c-exp.new
- -rm y.tab.c
+ < c-exp.tmp > c-exp.new
+ -rm c-exp.tmp
mv c-exp.new ./c-exp.tab.c
+# start-sanitize-java
jv-exp.tab.o: jv-exp.tab.c
jv-exp.tab.c: jv-exp.y
- $(YACC) $(YFLAGS) $(srcdir)/jv-exp.y
+ $(BISON) $(YFLAGS) -o jv-exp.tmp $(srcdir)/jv-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
-e '/^#line.*y.tab.c/d' \
- < y.tab.c > jv-exp.new
- -rm y.tab.c
+ < jv-exp.tmp > jv-exp.new
+ -rm jv-exp.tmp
mv jv-exp.new ./jv-exp.tab.c
+# end-sanitize-java
f-exp.tab.o: f-exp.tab.c
f-exp.tab.c: f-exp.y c-exp.tab.c
- $(YACC) $(YFLAGS) $(srcdir)/f-exp.y
+ $(BISON) $(YFLAGS) -o f-exp.tmp $(srcdir)/f-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
-e '/^#line.*y.tab.c/d' \
- < y.tab.c > f-exp.new
- -rm y.tab.c
+ < f-exp.tmp > f-exp.new
+ -rm f-exp.tmp
mv f-exp.new ./f-exp.tab.c
# m2-exp.tab.c is generated in objdir from m2-exp.y if it doesn't exist
# else.
m2-exp.tab.o: m2-exp.tab.c
m2-exp.tab.c: m2-exp.y
- $(YACC) $(YFLAGS) $(srcdir)/m2-exp.y
+ $(BISON) $(YFLAGS) -o m2-exp.tmp $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
-e '/^#line.*y.tab.c/d' \
- < y.tab.c > m2-exp.new
- -rm y.tab.c
+ < m2-exp.tmp > m2-exp.new
+ -rm m2-exp.tmp
mv m2-exp.new ./m2-exp.tab.c
# These files are updated atomically, so make never has to remove them
-.PRECIOUS: m2-exp.tab.c jv-exp.tab.c f-exp.tab.c c-exp.tab.c
+.PRECIOUS: m2-exp.tab.c f-exp.tab.c c-exp.tab.c
+# start-sanitize-java
+.PRECIOUS: jv-exp.tab.c
+# end-sanitize-java
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
# start-sanitize-gdbtk
-gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+gdbres.o: gdb.rc gdbtool.ico
+ $(WINDRES) --include $(srcdir) $(srcdir)/gdb.rc gdbres.o
+
+gdbtk.o: gdbtk.c gdbtk.h $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
$(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
$(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
$(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
$(srcdir)/gdbtk.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+gdbtk-cmds.o: gdbtk-cmds.c gdbtk.h $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/gdbtk-cmds.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+gdbtk-hooks.o: gdbtk-hooks.c gdbtk.h $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/gdbtk-hooks.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
tracepoint.o: tracepoint.c $(defs_h) $(symtab_h) $(frame_h) $(tracepoint_h) \
$(gdbtypes_h) $(expression_h) $(gdbcmd_h) $(value_h) target.h \
language.h gdb_string.h $(readline_headers)
# end-sanitize-gdbtk
+v850ice.o: v850ice.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(frame_h) $(breakpoint_h) $(gdbcore_h) $(value_h) symfile.h \
+ gdb_string.h target.h objfiles.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/v850ice.c
+
gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
$(value_h) gdb_string.h
language.h gdb_string.h
isi-xdep.o: isi-xdep.c
+# start-sanitize-java
+
+jv-lang.o: jv-lang.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+ $(expression_h) parser-defs.h language.h symfile.h objfiles.h \
+ gdb_string.h $(value_h) c-lang.h jv-lang.h $(gdbcore_h)
+
+jv-typeprint.o: jv-typeprint.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+ $(value_h) $(INCLUDE_DIR)/demangle.h jv-lang.h gdb_string.h
+
+jv-valprint.o: jv-valprint.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+ $(expression_h) $(value_h) $(INCLUDE_DIR)/demangle.h valprint.h \
+ language.h jv-lang.h c-lang.h
+# end-sanitize-java
language.o: language.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) language.h parser-defs.h $(symtab_h) \
true; \
fi
+remote-d10v.o: remote-d10v.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
+
remote-rdp.o: remote-rdp.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) gdb_string.h
stack.o: stack.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
language.h target.h gdb_string.h
+ax-general.o: ax-general.c $(ax_h) $(defs_h)
+ax-gdb.o: ax-gdb.c $(defs_h) $(symtab_h) symfile.h $(gdbtypes_h) \
+ $(value_h) $(expression_h) $(command_h) $(ax_h) $(gdbcmd_h) ax-gdb.h
+
sun3-nat.o: sun3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
sun386-nat.o: sun386-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+# start-sanitize-java
jv-exp.tab.o: jv-exp.tab.c jv-lang.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+# end-sanitize-java
f-exp.tab.o: f-exp.tab.c f-lang.h $(defs_h) $(expression_h) \
language.h parser-defs.h $(value_h) $(bfd_h) objfiles.h symfile.h
projects / deliverable / binutils-gdb.git / blobdiff