-# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
+# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
# Free Software Foundation, Inc.
# This file is part of GDB.
infodir = @infodir@
includedir = @includedir@
-SHELL = /bin/sh
+# This can be referenced by `INTLDEPS' as computed by CY_GNU_GETTEXT.
+top_builddir = .
+
+SHELL = @SHELL@
+EXEEXT = @EXEEXT@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
AR_FLAGS = qv
RANLIB = @RANLIB@
AWK = @AWK@
+DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
srcdir = @srcdir@
VPATH = @srcdir@
-YACC=@YACC@
+BISON=@YACC@
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# Where is the "-liberty" library? Typically in ../libiberty.
LIBIBERTY = ../libiberty/libiberty.a
-# Where is the MMALLOC library? Typically in ../mmalloc.
-# Note that mmalloc can still be used on systems without mmap().
-# To use your system malloc, in the host makefile fragment set MMALLOC_CFLAGS
-# to -DNO_MMALLOC and set MMALLOC to empty.
-# To use mmalloc but not use heap checking, in the host makefile fragment set
-# MMALLOC_CFLAGS to the value below but add -DNO_MMCHECK.
-# To use mmalloc and heap checking on a system where the C runtime allocates
-# memory that is never freed, in the host makefile fragment set MMALLOC_CFLAGS
-# to the value below and add -DFORCE_MMCHECK=1
-MMALLOC_DIR = ../mmalloc
-MMALLOC_SRC = $(srcdir)/$(MMALLOC_DIR)
-MMALLOC = $(MMALLOC_DIR)/libmmalloc.a
-MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
+# Configured by the --with-mmalloc option to configure.
+MMALLOC = @MMALLOC@
+MMALLOC_CFLAGS = @MMALLOC_CFLAGS@
# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE_CFLAGS = -I$(READLINE_SRC)
+# Where is the INTL library? Typically in ../intl.
+INTL_DIR = ../intl
+INTL = @INTLLIBS@
+INTL_DEPS = @INTLDEPS@
+INTL_SRC = $(srcdir)/$(INTL_DIR)
+INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
+
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
#start-sanitize-gdbtk
# Where is the TCL library? Typically in ../tcl.
-TCL = @TCL_BUILD_LIB_SPEC@
+LIB_INSTALL_DIR = $(libdir)
+# This variable is needed when doing dynamic linking.
+LIB_RUNTIME_DIR = $(libdir)
+TCL = @TCL_LD_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@
TCL_CFLAGS = @TCLHDIR@
+TCL_DEPS =
+GDBTKLIBS = @GDBTKLIBS@
# Where is the TK library? Typically in ../tk.
TK = @TK_BUILD_LIB_SPEC@
-TK_CFLAGS = @TKHDIR@
+TK_CFLAGS = @TKHDIR@ @TK_BUILD_INCLUDES@
+TK_DEPS =
+
+# Where is Itcl? Typically in ../itcl.
+ITCL_CFLAGS = @ITCLHDIR@
+ITCL = @ITCLLIB@
+ITCL_DEPS = $(ITCL)
+
+# Where is Tix? Typically in ../tix.
+TIX_CFLAGS = @TIXHDIR@
+TIX = @TIXLIB@
+TIX_DEPS = @TIX_DEPS@
X11_CFLAGS = @TK_XINCLUDES@
X11_LDFLAGS =
X11_LIBS =
+WIN32LDAPP = @WIN32LDAPP@
+WIN32LIBS = @WIN32LIBS@
+
ENABLE_GDBTK= @ENABLE_GDBTK@
+#start-sanitize-ide
+ENABLE_IDE= @ENABLE_IDE@
+
+FOUNDRY_LIB_BASE= @FOUNDRY_LIB_BASE@
+LIBGUI = @LIBGUI@
+GUI_CFLAGS_X = @GUI_CFLAGS_X@
+IDE_CFLAGS_X = @IDE_CFLAGS_X@
+IDE_X = @IDE_X@
+LIBIDETCL = @LIBIDETCL@
+LIBIDE = @LIBIDE@
+IDE_DEPS = @IDE_DEPS@
+IDE=$(IDE_X)
+IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
+#end-sanitize-ide
#end-sanitize-gdbtk
ENABLE_CFLAGS= @ENABLE_CFLAGS@
-ENABLE_CLIBS= @ENABLE_CLIBS@
-ENABLE_OBS= @ENABLE_OBS@
# -I. for config files.
# -I$(srcdir) for gdb internal headers and possibly for gnu-regex.h also.
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
- $(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(ENABLE_CFLAGS)
+ $(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
+ $(INTL_CFLAGS) $(ENABLE_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
# Profiling options need to go here to work.
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
-INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(LDFLAGS) @CONFIG_LDFLAGS@
+INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(LDFLAGS) @CONFIG_LDFLAGS@ @HLDFLAGS@
+HLDENV = @HLDENV@
# We are using our own version of REGEX now to be consistent across
# machines.
# LIBIBERTY appears twice on purpose.
# If you have the Cygnus libraries installed,
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
-INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty $(ENABLE_CLIBS) \
- $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
- -lmmalloc -liberty
-CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(LIBIBERTY) $(ENABLE_CLIBS) \
- $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
- $(MMALLOC) $(LIBIBERTY)
+INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty \
+ $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+ -lmmalloc -lintl -liberty
+CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(INTL) $(LIBIBERTY) \
+ $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+ $(MMALLOC) $(LIBIBERTY) $(WIN32LIBS)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
- $(OPCODES) $(MMALLOC) $(LIBIBERTY)
+ $(OPCODES) $(MMALLOC) $(INTL_DEPS) $(LIBIBERTY) @CONFIG_DEPS@
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION = 4.16.1
+VERSION=4.17.1
DIST=gdb
LINT=/usr/5bin/lint
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
-REMOTE_OBS = remote.o dcache.o remote-utils.o
+REMOTE_OBS = remote.o dcache.o remote-utils.o tracepoint.o ax-general.o ax-gdb.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS =
"CHILL_LIB=$(CHILL_LIB)" \
"CXX=$(CXX)" \
"CXXFLAGS=$(CXXFLAGS)" \
+ "DLLTOOL=$(DLLTOOL)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
# Links made at configuration time should not be specified here, since
# SFILES is used in building the distribution archive.
-SFILES = bcache.c blockframe.c breakpoint.c buildsym.c callback.c c-exp.y \
- c-lang.c c-typeprint.c c-valprint.c ch-exp.c ch-lang.c \
- ch-typeprint.c ch-valprint.c coffread.c command.c complaints.c \
- corefile.c cp-valprint.c \
- dbxread.c demangle.c dwarfread.c dwarf2read.c \
- elfread.c environ.c eval.c expprint.c \
- f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c \
- gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+SFILES = ax-general.c ax-gdb.c bcache.c blockframe.c breakpoint.c \
+ buildsym.c c-exp.y c-lang.c c-typeprint.c c-valprint.c \
+ ch-exp.c ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
+ command.c complaints.c corefile.c cp-valprint.c dbxread.c \
+ demangle.c dwarfread.c dwarf2read.c elfread.c environ.c eval.c \
+ expprint.c f-exp.y f-lang.c f-typeprint.c f-valprint.c \
+ findvar.c gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+ $(start-sanitize-java) \
+ jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
+ $(end-sanitize-java) \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
- printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c scm-valprint.c \
- source.c stabsread.c stack.c symfile.c symmisc.c \
- symtab.c target.c thread.c top.c \
- typeprint.c utils.c \
- valarith.c valops.c valprint.c values.c \
+ printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c \
+ scm-valprint.c source.c stabsread.c stack.c symfile.c \
+ symmisc.c symtab.c target.c thread.c top.c tracepoint.c \
+ typeprint.c utils.c valarith.c valops.c valprint.c values.c \
serial.c ser-unix.c mdebugread.c os9kread.c
-LINTFILES = $(SFILES) $(YYFILES) init.c
+LINTFILES = $(SFILES) $(YYFILES) @CONFIG_SRCS@ init.c
# "system" headers. Using these in dependencies is a rather personal
# choice. (-rich, summer 1993)
bfd_h = $(BFD_DIR)/bfd.h
wait_h = $(INCLUDE_DIR)/wait.h
dis-asm_h = $(INCLUDE_DIR)/dis-asm.h
+remote-sim_h = $(INCLUDE_DIR)/remote-sim.h
dcache_h = dcache.h
-remote_utils_h = $(dcache_h) serial.h target.h remote-utils.h remote-sim.h
+remote_utils_h = $(dcache_h) serial.h target.h remote-utils.h $(remote-sim_h)
+
readline_headers = \
$(READLINE_SRC)/chardefs.h \
defs_h = defs.h xm.h tm.h nm.h config.status config.h
inferior_h = inferior.h $(breakpoint_h)
+tracepoint_h = tracepoint.h
+ax_h = ax.h
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
gdb-stabs.h $(inferior_h) language.h minimon.h monitor.h \
objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
- c-lang.h ch-lang.h f-lang.h m2-lang.h \
+ c-lang.h ch-lang.h f-lang.h \
+ $(start-sanitize-java) \
+ jv-lang.h \
+ $(end-sanitize-java) \
+ m2-lang.h \
complaints.h valprint.h \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
vx-share/xdr_ptrace.h vx-share/xdr_rdb.h gdbthread.h \
- dcache.h remote-utils.h remote-sim.h top.h somsolib.h
+ dcache.h remote-utils.h top.h somsolib.h
# Header files that already have srcdir in them, or which are in objdir.
# Makefile.in
DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) \
- $(REMOTE_OBS) $(SIM_OBS) $(ENABLE_OBS) @THREAD_DB_OBS@
+ $(REMOTE_OBS) $(SIM_OBS) @CONFIG_OBS@
-SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
+SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) @CONFIG_SRCS@
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
# and it's more useful to see it in the .y file.
TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
exec.o bcache.o objfiles.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o elfread.o \
dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
- c-lang.o ch-exp.o ch-lang.o f-lang.o m2-lang.o \
+ c-lang.o ch-exp.o ch-lang.o f-lang.o \
+ $(start-sanitize-java) \
+ jv-lang.o jv-valprint.o jv-typeprint.o \
+ $(end-sanitize-java) \
+ m2-lang.o \
scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
- nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o callback.o
+ nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o
OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
NTSSTART = kdb-start.o
-SUBDIRS = doc testsuite nlm
+SUBDIRS = doc \
+ testsuite \
+ $(start-sanitize-mswin) \
+ mswin \
+ $(end-sanitize-mswin) \
+ nlm
# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.tab.c f-exp.tab.c m2-exp.tab.c
-YYOBJ = c-exp.tab.o f-exp.tab.o m2-exp.tab.o
+YYFILES = c-exp.tab.c \
+ $(start-sanitize-java) \
+ jv-exp.tab.c \
+ $(end-sanitize-java) \
+ f-exp.tab.c m2-exp.tab.c
+YYOBJ = c-exp.tab.o \
+ $(start-sanitize-java) \
+ jv-exp.tab.o \
+ $(end-sanitize-java) \
+ f-exp.tab.o m2-exp.tab.o
# Things which need to be built when making a distribution.
.c.o:
$(CC) -c $(INTERNAL_CFLAGS) $<
-all: gdb
+all: gdb$(EXEEXT)
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
installcheck:
else \
true ; \
fi ; \
- $(INSTALL_PROGRAM) gdb $(bindir)/$$transformed_name ; \
+ $(INSTALL_PROGRAM) gdb$(EXEEXT) $(bindir)/$$transformed_name$(EXEEXT) ; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
# start-sanitize-gdbtk
- if [ x"$(ENABLE_GDBTK)" != x ] ; then \
- $(INSTALL_DATA) $(srcdir)/gdbtk.tcl $(datadir)/gdbtk.tcl ; \
- else \
- true ; \
- fi
+ $(SHELL) $(srcdir)/../mkinstalldirs $(datadir)/gdbtcl ; \
+ $(SHELL) $(srcdir)/../mkinstalldirs \
+ $(datadir)/gdbtcl/images \
+ $(datadir)/gdbtcl/images2 ; \
+ $(SHELL) $(srcdir)/../mkinstalldirs $(datadir)/gdbtcl/help \
+ $(datadir)/gdbtcl/help/images \
+ $(datadir)/gdbtcl/help/trace ; \
+ cd $(srcdir)/gdbtcl2 ; \
+ for i in *.tcl images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/index.toc help/trace/*.html help/trace/index.toc help/images/*.gif; \
+ do \
+ $(INSTALL_DATA) $$i $(datadir)/gdbtcl/$$i ; \
+ done ;
# end-sanitize-gdbtk
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
else \
true ; \
fi ; \
- rm -f $(bindir)/$$transformed_name $(man1dir)/$$transformed_name.1
+ rm -f $(bindir)/$$transformed_name$(EXEEXT) $(man1dir)/$$transformed_name.1
# start-sanitize-gdbtk
- if [ x"$(ENABLE_GDBTK)" != x ] ; then \
- rm -f $(datadir)/gdbtk.tcl ; \
- fi
+ rm -rf $(datadir)/gdbtcl
# end-sanitize-gdbtk
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
@rm -f init.c-tmp
@echo '/* Do not modify this file. */' >init.c-tmp
@echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
- @echo 'void initialize_all_files () {' >>init.c-tmp
- @for i in $(OBS) $(TSOBS); do \
- filename=`echo $$i | sed \
- -e '/^Onindy.o/d' \
+ @echo '#include "ansidecl.h"' >>init.c-tmp
+ @echo 'extern void initialize_all_files PARAMS ((void));' >>init.c-tmp
+ @echo 'void initialize_all_files PARAMS ((void)) {' >>init.c-tmp
+ @-echo $(OBS) $(TSOBS) | \
+ tr ' ' '\012' | \
+ sed -e '/^Onindy.o/d' \
-e '/^nindy.o/d' \
-e '/ttyflush.o/d' \
-e '/xdr_ld.o/d' \
-e '/version.o/d' \
-e '/^[a-z0-9A-Z_]*_[SU].o/d' \
-e '/[a-z0-9A-Z_]*-exp.tab.o/d' \
- -e 's/\.o/.c/'` ; \
- case $$filename in \
- "") ;; \
- *) sed <$(srcdir)/$$filename >>init.c-tmp -n \
- -e '/^_initialize_[a-z_0-9A-Z]* *(/s/^\([a-z_0-9A-Z]*\).*/ {extern void \1 (); \1 ();}/p' ; ;; \
- esac ; \
- done
+ -e 's/\.o/.c/' \
+ -e 's|\([^ ][^ ]*\)|$(srcdir)/\1|g' | \
+ while read f; do grep '^_initialize_[a-z_0-9A-Z]* *(' $$f 2>/dev/null; done | \
+ sed -e 's/^.*://' -e 's/^\([a-z_0-9A-Z]*\).*/ {extern void \1 PARAMS ((void)); \1 ();}/' >>init.c-tmp
@echo '}' >>init.c-tmp
@mv init.c-tmp init.c
.PRECIOUS: init.c
# Removing the old gdb first works better if it is running, at least on SunOS.
-gdb: $(OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
- rm -f gdb
- $(CC_LD) $(INTERNAL_LDFLAGS) -o gdb \
+gdb$(EXEEXT): $(OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
+ rm -f gdb$(EXEEXT)
+ $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb$(EXEEXT) \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
nlm: force
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
- #unload $(srcdir)/c-exp.y $(srcdir)/m2-exp.y
+ #unload $(srcdir)/c-exp.y
+ $(start-sanitize-java)
+ #unload $(srcdir)/jv-exp.y
+ $(end-sanitize-java)
+ #unload $(srcdir)/m2-exp.y
#unload vx-share/*.h
#unload nindy-share/[A-Z]*
- #load c-exp.tab.c m2-exp.tab.c
+ #load c-exp.tab.c
+ $(start-sanitize-java)
+ #load jv-exp.tab.c
+ $(end-sanitize-java)
+ #load m2-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
#load ../bfd/libbfd.a
#load ../readline/libreadline.a
#load ../mmalloc/libmmalloc.a
+ #load ../intl/libintl.a
#load -ltermcap
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
-gdb1: gdb
- rm -f gdb1
- cp gdb gdb1
-
-### fixme - this can't be right.
-# This checks the configure.in file versus the config/ directory.
-config-check: config-check-hosts config-check-targets
-config-check-hosts:
- grep gdb_host= $(srcdir)/configure.in | \
- sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
- (cd $(srcdir)/config; ls *.mh) >HOSTdir.o
- diff -u HOSTconf.o HOSTdir.o
-
-### fixme - nor can this.
-config-check-targets:
- grep gdb_target= $(srcdir)/configure.in | \
- sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
- (cd $(srcdir)/config; ls *.mt) >TARGdir.o
- diff -u HOSTconf.o HOSTdir.o
+gdb1$(EXEEXT): gdb$(EXEEXT)
+ rm -f gdb1$(EXEEXT)
+ cp gdb$(EXEEXT) gdb1$(EXEEXT)
# FIXME. These are not generated by "make depend" because they only are there
# for some machines.
clean mostlyclean:
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f *.o $(ADD_FILES) *~ init.c-tmp
+ rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp
rm -f init.c version.c
- rm -f gdb core make.log libgdb-files
- rm -f gdb[0-9]
+ rm -f gdb$(EXEEXT) core make.log libgdb-files
+ rm -f gdb[0-9]$(EXEEXT)
# This used to depend on c-exp.tab.c m2-exp.tab.c TAGS
# I believe this is wrong; the makefile standards for distclean just
# functionality described is if the distributed files are unmodified.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f nm.h tm.h xm.h config.status config.h stamp-h
+ rm -f nm.h tm.h xm.h config.status config.h stamp-h .gdbinit
rm -f y.output yacc.acts yacc.tmp y.tab.h
rm -f config.log config.cache
rm -f Makefile
-maintainer-clean realclean: clean
+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
+realclean: maintainer-clean
+
+local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
- @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f c-exp.tab.c f-exp.tab.c m2-exp.tab.c
+ rm -f c-exp.tab.c \
+ $(start-sanitize-java)
+ jv-exp.tab \
+ $(end-sanitize-java)
+ f-exp.tab.c m2-exp.tab.c
rm -f TAGS $(INFOFILES)
+ rm -f $(YYFILES)
rm -f nm.h tm.h xm.h config.status
- rm -f y.output yacc.acts yacc.tmp
- rm -f config.log config.cache
- rm -f Makefile
+
+do-maintainer-clean:
+ @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" \
+ subdir_do
diststuff: $(DISTSTUFF)
cd doc; $(MAKE) $(MFLAGS) all-doc
# Makefile.in, but that was a pretty big annoyance.
c-exp.tab.o: c-exp.tab.c
c-exp.tab.c: c-exp.y
- $(YACC) $(YFLAGS) $(srcdir)/c-exp.y
+ $(BISON) $(YFLAGS) -o c-exp.tmp $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
- < y.tab.c > c-exp.new
- -rm y.tab.c
+ -e '/^#line.*y.tab.c/d' \
+ < c-exp.tmp > c-exp.new
+ -rm c-exp.tmp
mv c-exp.new ./c-exp.tab.c
+# start-sanitize-java
+jv-exp.tab.o: jv-exp.tab.c
+jv-exp.tab.c: jv-exp.y
+ $(BISON) $(YFLAGS) -o jv-exp.tmp $(srcdir)/jv-exp.y
+ -sed -e '/extern.*malloc/d' \
+ -e '/extern.*realloc/d' \
+ -e '/extern.*free/d' \
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ -e '/^#line.*y.tab.c/d' \
+ < jv-exp.tmp > jv-exp.new
+ -rm jv-exp.tmp
+ mv jv-exp.new ./jv-exp.tab.c
+
+# end-sanitize-java
f-exp.tab.o: f-exp.tab.c
f-exp.tab.c: f-exp.y c-exp.tab.c
- $(YACC) $(YFLAGS) $(srcdir)/f-exp.y
+ $(BISON) $(YFLAGS) -o f-exp.tmp $(srcdir)/f-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
- < y.tab.c > f-exp.new
- -rm y.tab.c
+ -e '/^#line.*y.tab.c/d' \
+ < f-exp.tmp > f-exp.new
+ -rm f-exp.tmp
mv f-exp.new ./f-exp.tab.c
# m2-exp.tab.c is generated in objdir from m2-exp.y if it doesn't exist
# else.
m2-exp.tab.o: m2-exp.tab.c
m2-exp.tab.c: m2-exp.y
- $(YACC) $(YFLAGS) $(srcdir)/m2-exp.y
+ $(BISON) $(YFLAGS) -o m2-exp.tmp $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
- < y.tab.c > m2-exp.new
- -rm y.tab.c
+ -e '/^#line.*y.tab.c/d' \
+ < m2-exp.tmp > m2-exp.new
+ -rm m2-exp.tmp
mv m2-exp.new ./m2-exp.tab.c
# These files are updated atomically, so make never has to remove them
.PRECIOUS: m2-exp.tab.c f-exp.tab.c c-exp.tab.c
+# start-sanitize-java
+.PRECIOUS: jv-exp.tab.c
+# end-sanitize-java
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
remote-st.c remote-utils.c dcache.c \
remote-udi.c remote-vx.c remote-vx29k.c \
rs6000-nat.c rs6000-tdep.c \
- ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
+ ser-go32.c ser-ocd.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
symm-tdep.c symm-nat.c \
tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
win32-nat.c \
xcoffread.c xcoffsolib.c z8k-tdep.c
-ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt config/a29k/vx29k.mt\
- config/a29k/a29k.mt config/a29k/ultra3.mh config/a29k/ultra3.mt \
- config/alpha/alpha-osf1.mh config/alpha/alpha-osf2.mh \
- config/alpha/alpha-osf1.mt config/alpha/alpha-nw.mt \
- config/arm/arm.mh config/arm/arm.mt config/convex/convex.mh \
- config/convex/convex.mt config/gould/np1.mh config/gould/np1.mt \
- config/gould/pn.mh config/gould/pn.mt config/h8300/h8300hms.mt \
- config/h8500/h8500hms.mt config/i386/go32.mh config/i386/i386aix.mh \
- config/i386/i386aix.mt config/i386/i386aout.mt config/i386/i386bsd.mh \
- config/i386/i386bsd.mt config/i386/i386lynx.mh \
- config/i386/i386lynx.mt config/i386/i386m3.mh config/i386/i386m3.mt \
- config/i386/i386mach.mh config/i386/i386mk.mh config/i386/i386mk.mt \
- config/i386/i386nw.mt config/i386/i386sco.mh \
- config/i386/i386sco4.mh \
- config/i386/i386sol2.mh config/i386/i386sol2.mt config/i386/i386v.mh \
- config/i386/i386v.mt config/i386/i386v32.mh config/i386/i386v4.mh \
- config/i386/i386v4.mt config/i386/linux.mh config/i386/linux.mt \
- config/i386/ncr3000.mh config/i386/ncr3000.mt config/i386/ptx.mh \
- config/i386/sun386.mh \
- config/i386/sun386.mt config/i386/symmetry.mh config/i386/symmetry.mt \
- config/i386/win32.mh config/i386/win32.mt \
- config/i960/mon960.mt \
- config/i960/nindy960.mt config/i960/vxworks960.mt config/m68k/3b1.mh \
- config/m68k/3b1.mt config/m68k/altos.mh config/m68k/altos.mt \
- config/m68k/amix.mh config/m68k/amix.mt config/m68k/apollo68b.mh \
- config/m68k/apollo68b.mt \
- config/m68k/apollo68v.mh \
- config/m68k/cisco.mt config/m68k/delta68.mh \
- config/m68k/delta68.mt config/m68k/dpx2.mh config/m68k/dpx2.mt \
- config/m68k/es1800.mt config/m68k/hp300bsd.mh \
- config/m68k/hp300bsd.mt config/m68k/hp300hpux.mh \
- config/m68k/hp300hpux.mt config/m68k/isi.mh config/m68k/isi.mt \
- config/m68k/m68klynx.mh config/m68k/m68klynx.mt \
- config/m68k/monitor.mt \
- config/m68k/news.mh config/m68k/news.mt config/m68k/news1000.mh \
- config/m68k/os68k.mt config/m68k/st2000.mt config/m68k/sun2os3.mh \
- config/m68k/sun2os3.mt config/m68k/sun2os4.mh config/m68k/sun2os4.mt \
- config/m68k/sun3os3.mh config/m68k/sun3os3.mt config/m68k/sun3os4.mh \
- config/m68k/sun3os4.mt config/m68k/vxworks68.mt config/m88k/delta88.mh \
- config/m88k/delta88.mt config/m88k/delta88v4.mh \
- config/m88k/delta88v4.mt config/m88k/m88k.mh config/m88k/m88k.mt \
- config/mips/bigmips.mt config/mips/bigmips64.mt \
- config/mips/decstation.mh \
- config/mips/decstation.mt config/mips/idt.mt config/mips/idtl.mt \
- config/mips/idt64.mt config/mips/idtl64.mt \
- config/mips/irix3.mh config/mips/irix3.mt config/mips/irix4.mh \
- config/mips/irix5.mh config/mips/irix5.mt \
- config/mips/littlemips.mh config/mips/littlemips.mt \
- config/mips/mipsel64.mt \
- config/mips/mipsm3.mh config/mips/mipsm3.mt \
- config/mips/mipsv4.mh config/mips/mipsv4.mt \
- config/mips/news-mips.mh config/mips/riscos.mh \
- config/none/none.mh config/none/none.mt config/ns32k/merlin.mh \
- config/ns32k/merlin.mt config/ns32k/ns32km3.mh config/ns32k/ns32km3.mt \
- config/ns32k/umax.mh config/ns32k/umax.mt \
- config/pa/hppabsd.mh config/pa/hppabsd.mt config/pa/hppahpux.mh \
- config/pa/hppahpux.mt config/pyr/pyramid.mh config/pyr/pyramid.mt \
- config/romp/rtbsd.mh config/rs6000/rs6000.mh config/rs6000/rs6000.mt \
- config/sh/sh.mt config/sparc/sparc-em.mt config/sparc/sparclite.mt \
- config/sparc/sparclynx.mh config/sparc/sparclynx.mt \
- config/sparc/sun4os4.mh config/sparc/sun4os4.mt \
- config/sparc/sun4sol2.mh config/sparc/sun4sol2.mt \
- config/sparc/vxsparc.mt config/tahoe/tahoe.mh config/tahoe/tahoe.mt \
- config/vax/vax.mt config/vax/vaxbsd.mh config/vax/vaxult.mh \
- config/vax/vaxult2.mh config/z8k/z8ksim.mt
-
-
udip2soc.o: $(srcdir)/29k-share/udi/udip2soc.c $(udiheaders)
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udip2soc.c
buildsym.o: buildsym.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
objfiles.h symfile.h $(symtab_h) gdb_string.h
-callback.o: callback.c $(defs_h) callback.h
-
c-lang.o: c-lang.c c-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
demangle.o: demangle.c $(defs_h) $(gdbcmd_h) gdb_string.h
+dink32-rom.o: dink32-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) target.h serial.h terminal.h
+
dpx2-nat.o: dpx2-nat.c $(defs_h) $(gdbcore_h) gdb_string.h
dstread.o: dstread.c gdb_string.h
$(symtab_h) gdb_string.h
elfread.o: elfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
- gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
+ gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h \
+ $(BFD_SRC)/elf-bfd.h $(INCLUDE_DIR)/elf/mips.h
environ.o: environ.c $(defs_h) environ.h $(gdbcore_h) gdb_string.h
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
# start-sanitize-gdbtk
-gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
- $(bfd_h) symfile.h objfiles.h target.h gdb_string.h
- $(CC) -c $(INTERNAL_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
- $(srcdir)/gdbtk.c -DGDBTK_FILENAME=\"$(datadir)/gdbtk.tcl\"
+gdbres.o: gdb.rc gdbtool.ico
+ $(WINDRES) --include $(srcdir) $(srcdir)/gdb.rc gdbres.o
+
+gdbtk.o: gdbtk.c gdbtk.h $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/gdbtk.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+gdbtk-cmds.o: gdbtk-cmds.c gdbtk.h $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/gdbtk-cmds.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+gdbtk-hooks.o: gdbtk-hooks.c gdbtk.h $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/gdbtk-hooks.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
+
+tracepoint.o: tracepoint.c $(defs_h) $(symtab_h) $(frame_h) $(tracepoint_h) \
+ $(gdbtypes_h) $(expression_h) $(gdbcmd_h) $(value_h) target.h \
+ language.h gdb_string.h $(readline_headers)
# end-sanitize-gdbtk
+v850ice.o: v850ice.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(frame_h) $(breakpoint_h) $(gdbcore_h) $(value_h) symfile.h \
+ gdb_string.h target.h objfiles.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \
+ $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/v850ice.c
+
gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
$(value_h) gdb_string.h
+gnu-nat.o: process_reply_S.h exc_request_S.h notify_S.h msg_reply_S.h \
+ exc_request_U.h msg_U.h gnu-nat.h
+
go32-xdep.o: go32-xdep.c
gould-tdep.o: gould-tdep.c $(OP_INCLUDE)/np1.h $(defs_h) $(frame_h) \
$(inferior_h) objfiles.h symfile.h target.h
hppab-nat.o: hppab-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
+
hppah-nat.o: hppah-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
+i386gnu-nat.o: gnu-nat.h
+
i386-tdep.o: i386-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
language.h gdb_string.h
isi-xdep.o: isi-xdep.c
+# start-sanitize-java
+
+jv-lang.o: jv-lang.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+ $(expression_h) parser-defs.h language.h symfile.h objfiles.h \
+ gdb_string.h $(value_h) c-lang.h jv-lang.h $(gdbcore_h)
+
+jv-typeprint.o: jv-typeprint.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+ $(value_h) $(INCLUDE_DIR)/demangle.h jv-lang.h gdb_string.h
+
+jv-valprint.o: jv-valprint.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+ $(expression_h) $(value_h) $(INCLUDE_DIR)/demangle.h valprint.h \
+ language.h jv-lang.h c-lang.h
+# end-sanitize-java
language.o: language.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) language.h parser-defs.h $(symtab_h) \
somsolib.o: somsolib.c $(defs_h)
+hpux-thread.o: hpux-thread.c $(defs_h) gdbthread.h target.h inferior.h
+ $(CC) -c $(INTERNAL_CFLAGS) -I$(srcdir)/osf-share \
+ -I$(srcdir)/osf-share/HP800 -I/usr/include/dce $(srcdir)/hpux-thread.c
+
hpread.o: hpread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
gdb_string.h
+ppc-bdm.o: ppc-bdm.c $(defs_h) $(gdbcore_h) gdb_string.h $(frame_h) \
+ $(inferior_h) $(bfd_h) symfile.h target.h $(wait_h) $(gdbcmd_h) \
+ objfiles.h gdb-stabs.h serial.h ocd.h
+
ppcbug-rom.o: ppcbug-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdb_string.h
-remote-arc.o: remote-arc.c gdb_string.h
-
remote-array.o: remote-array.c $(wait_h) $(defs_h) $(gdbcore_h) target.h \
gdb_string.h $(command_h) serial.h monitor.h $(remote_utils_h)
+remote-rdi.o: remote-rdi.c $(wait_h) $(defs_h) $(gdbcore_h) \
+ $(inferior_h) gdb_string.h
+
+rdi-share/libangsd.a: force
+ @dir=rdi-share; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+remote-d10v.o: remote-d10v.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
+
remote-rdp.o: remote-rdp.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) gdb_string.h
$(command_h) monitor.h $(remote_utils_h) $(symtab_h) symfile.h \
objfiles.h gdb-stabs.h gdb_string.h
+remote-sds.o: remote-sds.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
+
remote-sim.o: remote-sim.c $(wait_h) $(defs_h) $(gdbcore_h) \
- $(inferior_h) target.h terminal.h gdb_string.h
+ $(inferior_h) target.h terminal.h gdb_string.h \
+ $(INCLUDE_DIR)/callback.h
remote-st.o: remote-st.c $(wait_h) $(defs_h) $(gdbcore_h) serial.h \
target.h gdb_string.h
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
vx-share/xdr_rdb.h gdb_string.h
+ocd.o: ocd.c ocd.h $(gdbcore_h) gdb_string.h $(frame_h) $(inferior_h) \
+ $(bfd_h) symfile.h target.h $(wait_h) $(gdbcmd_h) objfiles.h \
+ gdb-stabs.h $(dcache_h) serial.h
+
remote-utils.o: remote-utils.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) $(remote_utils_h) gdb_string.h
ser-mac.o: ser-mac.c $(defs_h) serial.h signals.h
+ser-ocd.o: ser-ocd.c $(defs_h) serial.h signals.h gdb_string.h
+
ser-tcp.o: ser-tcp.c $(defs_h) serial.h signals.h gdb_string.h
ser-unix.o: ser-unix.c $(defs_h) serial.h
stack.o: stack.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
language.h target.h gdb_string.h
+ax-general.o: ax-general.c $(ax_h) $(defs_h)
+ax-gdb.o: ax-gdb.c $(defs_h) $(symtab_h) symfile.h $(gdbtypes_h) \
+ $(value_h) $(expression_h) $(command_h) $(ax_h) $(gdbcmd_h) ax-gdb.h
+
sun3-nat.o: sun3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
sun386-nat.o: sun386-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
symfile.o: symfile.c $(breakpoint_h) complaints.h $(defs_h) \
language.h objfiles.h symfile.h $(symtab_h) target.h \
gdb_string.h
-symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
symm-nat.o: symm-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
symmisc.o: symmisc.c $(bfd_h) $(breakpoint_h) $(command_h) $(defs_h) \
tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
$(symtab_h)
+#start-sanitize-tic80
+tic80-tdep.o: tic80-tdep.c $(defs_h)
+#end-sanitize-tic80
+
target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \
objfiles.h symfile.h target.h gdb_string.h
$(value_h) gdb_string.h
ultra3-nat.o: ultra3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
ultra3-xdep.o: ultra3-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
umax-xdep.o: umax-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
utils.o: utils.c $(bfd_h) $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+# start-sanitize-java
+jv-exp.tab.o: jv-exp.tab.c jv-lang.h $(defs_h) $(expression_h) \
+ $(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
+ $(bfd_h) objfiles.h symfile.h
+
+# end-sanitize-java
f-exp.tab.o: f-exp.tab.c f-lang.h $(defs_h) $(expression_h) \
language.h parser-defs.h $(value_h) $(bfd_h) objfiles.h symfile.h