-# Copyright (C) 1989-2013 Free Software Foundation, Inc.
+# Copyright (C) 1989-2016 Free Software Foundation, Inc.
# This file is part of GDB.
pdfdir = @pdfdir@
includedir = @includedir@
+install_sh = @install_sh@
+
# This can be referenced by `LIBINTL' as computed by
# ZW_GNU_GETTEXT_SISTER_DIR.
top_builddir = .
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
DESTDIR =
DLLTOOL = @DLLTOOL@
WINDRES = @WINDRES@
MIG = @MIG@
+STRIP = @STRIP@
XGETTEXT = @XGETTEXT@
GMSGFMT = @GMSGFMT@
PACKAGE = @PACKAGE@
CATALOGS = @CATALOGS@
+# The name of the compiler to use.
+COMPILER = @COMPILER@
+
# If you are compiling with GCC, make sure that either 1) You have the
# fixed include files where GCC can reach them, or 2) You use the
# -traditional flag. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
CC=@CC@
+CXX=@CXX@
# Dependency tracking information.
DEPMODE = @CCDEPMODE@
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
-COMPILE.pre = $(CC)
+COMPILE.pre = $(COMPILER)
COMPILE.post = -c -o $@
COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
POSTCOMPILE = @true
# Directory containing source files.
srcdir = @srcdir@
VPATH = @srcdir@
+top_srcdir = @top_srcdir@
YACC=@YACC@
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefined references.
#CC_LD=gcc -static
-CC_LD=$(CC)
+CC_LD=$(COMPILER)
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
BFD_SRC = $(srcdir)/$(BFD_DIR)
BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
+# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
+# -I../zlib, unless we were configured with --with-system-zlib, in which
+# case both are empty.
+ZLIB = @zlibdir@ -lz
+ZLIBINC = @zlibinc@
+
# Where is the decnumber library? Typically in ../libdecnumber.
LIBDECNUMBER_DIR = ../libdecnumber
LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
# available.
LIBBABELTRACE = @LIBBABELTRACE@
+# Where is libipt? This will be empty if libipt was not available.
+LIBIPT = @LIBIPT@
+
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
INTL_DEPS = @LIBINTL_DEP@
INTL_CFLAGS = @INCINTL@
+# Where is the ICONV library? This will be empty if in libc or not available.
+LIBICONV = @LIBICONV@
+
# Did the user give us a --with-gdb-datadir option?
GDB_DATADIR = @GDB_DATADIR@
SUBDIR_TUI_CFLAGS= \
-DTUI=1
+#
+# GCC Compile support sub-directory definitions
+#
+SUBDIR_GCC_COMPILE_OBS = \
+ compile.o compile-c-symbols.o compile-c-types.o \
+ compile-object-load.o compile-object-run.o \
+ compile-loc2c.o compile-c-support.o
+SUBDIR_GCC_COMPILE_SRCS = \
+ compile/compile.c \
+ compile/compile-c-symbols.c \
+ compile/compile-c-types.c \
+ compile/compile-object-load.c \
+ compile/compile-object-load.h \
+ compile/compile-object-run.c \
+ compile/compile-object-run.h \
+ compile/compile-loc2c.c \
+ compile/compile-c-support.c
+
+# Guile sub directory definitons for guile support.
+
+SUBDIR_GUILE_OBS = \
+ guile.o \
+ scm-arch.o \
+ scm-auto-load.o \
+ scm-block.o \
+ scm-breakpoint.o \
+ scm-cmd.o \
+ scm-disasm.o \
+ scm-exception.o \
+ scm-frame.o \
+ scm-gsmob.o \
+ scm-iterator.o \
+ scm-lazy-string.o \
+ scm-objfile.o \
+ scm-math.o \
+ scm-param.o \
+ scm-ports.o \
+ scm-pretty-print.o \
+ scm-progspace.o \
+ scm-safe-call.o \
+ scm-string.o \
+ scm-symbol.o \
+ scm-symtab.o \
+ scm-type.o \
+ scm-utils.o \
+ scm-value.o
+SUBDIR_GUILE_SRCS = \
+ guile/guile.c \
+ guile/scm-arch.c \
+ guile/scm-auto-load.c \
+ guile/scm-block.c \
+ guile/scm-breakpoint.c \
+ guile/scm-cmd.c \
+ guile/scm-disasm.c \
+ guile/scm-exception.c \
+ guile/scm-frame.c \
+ guile/scm-gsmob.c \
+ guile/scm-iterator.c \
+ guile/scm-lazy-string.c \
+ guile/scm-objfile.c \
+ guile/scm-math.c \
+ guile/scm-param.c \
+ guile/scm-ports.c \
+ guile/scm-pretty-print.c \
+ guile/scm-progspace.c \
+ guile/scm-safe-call.c \
+ guile/scm-string.c \
+ guile/scm-symbol.c \
+ guile/scm-symtab.c \
+ guile/scm-type.c \
+ guile/scm-utils.c \
+ guile/scm-value.c
+SUBDIR_GUILE_DEPS =
+SUBDIR_GUILE_LDFLAGS=
+SUBDIR_GUILE_CFLAGS=
+
#
# python sub directory definitons
#
py-breakpoint.o \
py-cmd.o \
py-continueevent.o \
+ py-xmethods.o \
py-event.o \
py-evtregistry.o \
py-evts.o \
py-function.o \
py-gdb-readline.o \
py-inferior.o \
+ py-infevents.o \
py-infthread.o \
py-lazy-string.o \
py-linetable.o \
py-symtab.o \
py-threadevent.o \
py-type.o \
+ py-unwind.o \
py-utils.o \
- py-value.o
+ py-value.o \
+ py-varobj.o
SUBDIR_PYTHON_SRCS = \
python/python.c \
python/py-breakpoint.c \
python/py-cmd.c \
python/py-continueevent.c \
+ python/py-xmethods.c \
python/py-event.c \
python/py-evtregistry.c \
python/py-evts.c \
python/py-function.c \
python/py-gdb-readline.c \
python/py-inferior.c \
+ python/py-infevents.c \
python/py-infthread.c \
python/py-lazy-string.c \
python/py-linetable.c \
python/py-symtab.c \
python/py-threadevent.c \
python/py-type.c \
+ python/py-unwind.c \
python/py-utils.c \
- python/py-value.c
+ python/py-value.c \
+ python/py-varobj.c
SUBDIR_PYTHON_DEPS =
SUBDIR_PYTHON_LDFLAGS=
SUBDIR_PYTHON_CFLAGS=
# are sometimes a little generic, we think that the risk of collision
# with other header files is high. If that happens, we try to mitigate
# a bit the consequences by putting the Python includes last in the list.
-INTERNAL_CPPFLAGS = @CPPFLAGS@ @PYTHON_CPPFLAGS@
+INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
# Need to pass this to testsuite for "make check". Probably should be
# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS_BASE = \
$(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
- $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
+ $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
$(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
# Libraries and corresponding dependencies for compiling gdb.
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
-CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
- $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
+CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
+ $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
+ @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
+ $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
$(srcdir)/features/library-list-aix.dtd \
$(srcdir)/features/library-list-svr4.dtd $(srcdir)/features/osdata.dtd \
$(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd \
- $(srcdir)/features/btrace.dtd
+ $(srcdir)/features/btrace.dtd $(srcdir)/features/btrace-conf.dtd
# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
# interface to the serial port. Hopefully if get ported to OS/2, VMS,
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
- remote-notif.o ctf.o
+ remote-notif.o ctf.o tracefile.o tracefile-tfile.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS = @SIM_OBS@
# All target-dependent objects files that require 64-bit CORE_ADDR
# (used with --enable-targets=all --enable-64-bit-bfd).
ALL_64_TARGET_OBS = \
- aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
+ aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o aarch64-insn.o \
alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
- alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
+ alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
amd64-linux-tdep.o amd64nbsd-tdep.o \
amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
- ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
+ ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
mips64obsd-tdep.o \
sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
- armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
+ armbsd-tdep.o arm.o arm-linux.o arm-linux-tdep.o \
+ arm-get-next-pcs.o arm-symbian-tdep.o \
armnbsd-tdep.o armobsd-tdep.o \
arm-tdep.o arm-wince-tdep.o \
avr-tdep.o \
bfin-linux-tdep.o bfin-tdep.o \
cris-linux-tdep.o cris-tdep.o \
dicos-tdep.o \
+ fbsd-tdep.o \
frv-linux-tdep.o frv-tdep.o \
+ ft32-tdep.o \
h8300-tdep.o \
hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
- hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
+ hppa-linux-tdep.o hppa-tdep.o \
i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
m88k-tdep.o \
mep-tdep.o \
microblaze-tdep.o microblaze-linux-tdep.o \
- mips-irix-tdep.o mips-linux-tdep.o \
+ mips-linux-tdep.o mips-sde-tdep.o \
mipsnbsd-tdep.o mips-tdep.o \
mn10300-linux-tdep.o mn10300-tdep.o \
moxie-tdep.o \
bsd-uthread.o \
nbsd-tdep.o obsd-tdep.o \
sol2-tdep.o \
- solib-frv.o solib-irix.o solib-svr4.o \
- solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
- dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
+ solib-frv.o solib-svr4.o \
+ solib-darwin.o solib-dsbt.o \
remote-m32r-sdi.o remote-mips.o \
xcoffread.o \
symfile-mem.o \
"MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
fi; \
fi`
-CXX = gcc
CXX_FOR_TARGET = ` \
- if [ -f $${rootme}/../gcc/xgcc ] ; then \
+ if [ -f $${rootme}/../gcc/xg++ ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
+ echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
+ echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
fi; \
fi`
"MAKEHTML=$(MAKEHTML)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
- "FORCE_PARALLEL=$(FORCE_PARALLEL)"
+ "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
+ "TESTS=$(TESTS)"
# All source files that go into linking GDB.
# Links made at configuration time should not be specified here, since
bfd-target.c \
block.c blockframe.c \
breakpoint.c break-catch-sig.c break-catch-throw.c \
+ break-catch-syscall.c \
build-id.c buildsym.c \
c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
- charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
+ charset.c common/cleanups.c cli-out.c coffread.c coff-pe-read.c \
complaints.c completer.c continuations.c corefile.c corelow.c \
cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
- d-lang.c d-valprint.c \
+ d-exp.y d-lang.c d-namespace.c d-valprint.c \
cp-name-parser.y \
- dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
+ dbxread.c demangle.c dictionary.c disasm.c doublest.c \
+ dtrace-probe.c dummy-frame.c \
dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
dwarf2-frame-tailcall.c \
elfread.c environ.c eval.c event-loop.c event-top.c \
- exceptions.c expprint.c \
+ exceptions.c expprint.c extension.c \
f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
inline-frame.c \
interps.c \
jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
- language.c linespec.c minidebug.c \
+ language.c linespec.c location.c minidebug.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
memrange.c mi/mi-common.c \
+ namespace.c \
objc-lang.c \
objfiles.c osabi.c observer.c osdata.c \
opencl-lang.c \
stabsread.c stack.c probe.c stap-probe.c std-regs.c \
symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
target.c target-dcache.c target-descriptions.c target-memory.c \
- thread.c top.c tracepoint.c \
+ tid-parse.c thread.c top.c tracepoint.c \
trad-frame.c \
tramp-frame.c \
typeprint.c \
jit.c \
xml-syscall.c \
annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
- regset.c sol-thread.c windows-termcap.c \
+ sol-thread.c stub-termcap.c \
common/gdb_vecs.c common/common-utils.c common/xml-utils.c \
common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \
common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \
- target/waitstatus.c
+ target/waitstatus.c common/print-utils.c common/rsp-low.c \
+ common/errors.c common/common-debug.c common/common-exceptions.c \
+ common/btrace-common.c common/fileio.c common/common-regcache.c \
+ $(SUBDIR_GCC_COMPILE_SRCS)
LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
# right, it is probably easiest just to list .h files here directly.
HFILES_NO_SRCDIR = \
-common/gdb_signals.h common/gdb_thread_db.h common/gdb_vecs.h \
-common/i386-xstate.h common/linux-ptrace.h common/mips-linux-watch.h \
+common/gdb_signals.h nat/gdb_thread_db.h common/gdb_vecs.h \
+common/x86-xstate.h nat/linux-ptrace.h nat/mips-linux-watch.h \
proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
-exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
+exec.h m32r-tdep.h osabi.h gdbcore.h amd64bsd-nat.h \
i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
-ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
+ia64-tdep.h ada-lang.h varobj.h varobj-iter.h frv-tdep.h \
+nto-tdep.h serial.h \
c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
cli/cli-decode.h cli/cli-cmds.h cli/cli-utils.h \
cli/cli-script.h macrotab.h symtab.h common/version.h \
-gnulib/import/string.in.h gnulib/import/str-two-way.h \
+compile/compile.h gnulib/import/string.in.h gnulib/import/str-two-way.h \
gnulib/import/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
-gdbarch.h bsd-uthread.h common/gdb_stat.h memory-map.h memrange.h \
+gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
objfiles.h common/vec.h disasm.h mips-tdep.h ser-base.h \
gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
-inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
+inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h \
solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
-m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
+m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
target.h target-dcache.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
tui/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
expression.h score-tdep.h gdb_select.h ser-tcp.h \
-build-id.h buildsym.h valprint.h \
+extension.h extension-priv.h nat/aarch64-linux-hw-point.h \
+build-id.h buildsym.h valprint.h nat/aarch64-linux.h \
typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
-amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
-sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
+amd64-linux-tdep.h linespec.h location.h i387-tdep.h mn10300-tdep.h \
+sparc64-tdep.h ppcobsd-tdep.h \
coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
-m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
+m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \
doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
rs6000-tdep.h rs6000-aix-tdep.h \
-common/gdb_locale.h common/gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
+common/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
language.h nbsd-tdep.h solib-svr4.h \
-macroexp.h ui-file.h regcache.h tracepoint.h i386-tdep.h \
+macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
-regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-i386gnu.h \
+regformats/regdef.h config/i386/nm-i386gnu.h \
config/i386/nm-fbsd.h \
config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
top.h bsd-kvm.h gdb-stabs.h reggroups.h \
remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
-psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
+psymtab.h psympriv.h progspace.h bfin-tdep.h \
amd64-darwin-tdep.h charset-list.h \
config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
+i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
+ft32-tdep.h \
osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
python/python-internal.h python/python.h ravenscar-thread.h record.h \
record-full.h solib-aix.h \
-solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
+solib-darwin.h solib-spu.h windows-nat.h xcoffread.h \
gnulib/import/extra/snippet/arg-nonnull.h gnulib/import/extra/snippet/c++defs.h \
gnulib/import/extra/snippet/warn-on-use.h \
gnulib/import/stddef.in.h gnulib/import/inttypes.in.h inline-frame.h skip.h \
common/common-utils.h common/xml-utils.h common/buffer.h common/ptid.h \
common/format.h common/host-defs.h utils.h common/queue.h \
-common/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
-gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common/linux-btrace.h \
-ctf.h common/i386-cpuid.h common/i386-gcc-cpuid.h target/resume.h \
-target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h
+nat/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
+gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat/linux-btrace.h \
+nat/ppc-linux.h ctf.h nat/x86-cpuid.h nat/x86-gcc-cpuid.h target/resume.h \
+target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
+common/print-utils.h common/rsp-low.h nat/x86-dregs.h x86-linux-nat.h \
+i386-linux-nat.h common/common-defs.h common/errors.h common/common-types.h \
+common/common-debug.h common/cleanups.h common/gdb_setjmp.h \
+common/common-exceptions.h target/target.h common/symbol.h \
+common/common-regcache.h fbsd-tdep.h nat/linux-personality.h \
+common/fileio.h nat/x86-linux.h nat/x86-linux-dregs.h \
+nat/linux-namespaces.h arch/arm.h common/gdb_sys_time.h arch/aarch64-insn.h \
+tid-parse.h
# Header files that already have srcdir in them, or which are in objdir.
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
-REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
-
# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
# default their values the way we do for SER_HARDWIRE; in the future
# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
agent.o \
bfd-target.o \
blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
+ break-catch-syscall.o \
findvar.o regcache.o cleanups.o \
charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
- linespec.o dictionary.o \
- infcall.o \
+ linespec.o dictionary.o namespace.o \
+ location.o infcall.o \
infcmd.o infrun.o \
- expprint.o environ.o stack.o thread.o \
+ expprint.o environ.o stack.o tid-parse.o thread.o thread-fsm.o \
exceptions.o \
+ extension.o \
filesystem.o \
filestuff.o \
inf-child.o \
frame-base.o \
inline-frame.o \
gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
- cp-namespace.o \
- reggroups.o regset.o \
+ cp-namespace.o d-namespace.o \
+ reggroups.o \
trad-frame.o \
tramp-frame.o \
solib.o solib-target.o \
inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
gdb_vecs.o jit.o progspace.o skip.o probe.o \
common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
- format.o registry.o btrace.o record-btrace.o waitstatus.o
+ format.o registry.o btrace.o record-btrace.o waitstatus.o \
+ print-utils.o rsp-low.o errors.o common-debug.o debug.o \
+ common-exceptions.o btrace-common.o fileio.o \
+ common-regcache.o \
+ $(SUBDIR_GCC_COMPILE_OBS)
TSOBS = inflow.o
ada-lex.c \
ada-exp.c \
jv-exp.c \
- f-exp.c go-exp.c m2-exp.c p-exp.c
+ d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
YYOBJ = c-exp.o \
cp-name-parser.o \
ada-exp.o \
jv-exp.o \
- f-exp.o go-exp.o m2-exp.o p-exp.o
+ d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o
# Things which need to be built when making a distribution.
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
else true; fi
+check-read1: force
+ @if [ -f testsuite/Makefile ]; then \
+ rootme=`pwd`; export rootme; \
+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
+ cd testsuite; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
+ else true; fi
+
# The idea is to parallelize testing of multilibs, for example:
# make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
# will run 3 concurrent sessions of check, eventually testing all 10
"$$target"; \
else true; fi
+# The set of headers checked by 'check-headers' by default.
+CHECK_HEADERS = $(HFILES_NO_SRCDIR)
+
+# Try to compile each header in isolation, thus ensuring headers are
+# self-contained.
+#
+# Defaults to checking all $HFILES_NO_SRCDIR headers.
+#
+# Do:
+#
+# make check-headers CHECK_HEADERS="header.h list.h"
+#
+# to check specific headers.
+#
+check-headers:
+ @echo Checking headers.
+ for i in $(CHECK_HEADERS) ; do \
+ $(CC) -x c -c -fsyntax-only $(INTERNAL_CFLAGS) \
+ -include defs.h $(srcdir)/$$i ; \
+ done
+.PHONY: check-headers
+
info install-info clean-info dvi pdf install-pdf html install-html: force
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
- $(INSTALL_PROGRAM) gcore \
+ $(INSTALL_SCRIPT) gcore \
$(DESTDIR)$(bindir)/$$transformed_name; \
fi
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
+install-strip:
+ $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
+
+install-guile:
+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
+
install-python:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
# duplicates. Files in the gdb/ directory can end up appearing in
# COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
-INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
+INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS) $(SUBDIR_GCC_COMPILE_SRCS)
init.c: $(INIT_FILES)
@echo Making init.c
@rm -f init.c-tmp init.l-tmp
cp-name-parser.c \
ada-lex.c ada-exp.c \
jv-exp.tab \
- f-exp.c go-exp.c m2-exp.c p-exp.c
+ d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
rm -f TAGS $(INFOFILES)
rm -f $(YYFILES)
rm -f nm.h config.status
CONFIG_LINKS= \
$(SHELL) config.status
-config.status: $(srcdir)/configure configure.tgt configure.host development.sh
+config.status: $(srcdir)/configure configure.tgt configure.host ../bfd/development.sh
$(SHELL) config.status --recheck
ACLOCAL = aclocal
configure.ac \
acx_configure_dir.m4 \
libmcheck.m4 \
+ transform.m4 \
../bfd/bfd.m4 \
../config/acinclude.m4 \
../config/plugins.m4 \
aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
aarch64-linux-nat.c \
aix-thread.c \
- alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
+ alphabsd-nat.c alpha-linux-nat.c \
alpha-tdep.c alpha-mdebug-tdep.c \
- alpha-linux-tdep.c alpha-osf1-tdep.c \
+ alpha-linux-tdep.c \
alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
amd64-nat.c amd64-tdep.c \
amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
amd64-dicos-tdep.c \
amd64-linux-nat.c amd64-linux-tdep.c \
amd64-sol2-tdep.c \
- arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
+ arm.c arm-get-next-pcs.c \
+ arm-linux.c arm-linux-nat.c arm-linux-tdep.c \
+ arm-symbian-tdep.c arm-tdep.c \
armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
avr-tdep.c \
bfin-linux-tdep.c bfin-tdep.c \
dcache.c dicos-tdep.c darwin-nat.c \
exec.c \
fbsd-nat.c \
+ fbsd-tdep.c \
fork-child.c \
+ ft32-tdep.c \
glibc-tdep.c \
go32-nat.c h8300-tdep.c \
- hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
+ hppa-tdep.c \
hppa-linux-tdep.c hppa-linux-nat.c \
- hppabsd-nat.c hppabsd-tdep.c \
- hppaobsd-tdep.c \
+ hppabsd-tdep.c \
hppanbsd-nat.c hppanbsd-tdep.c \
+ hppaobsd-nat.c hppaobsd-tdep.c \
i386-tdep.c i386-linux-nat.c \
i386v4-nat.c i386-cygwin-tdep.c \
i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
i387-tdep.c \
i386-darwin-tdep.c i386-darwin-nat.c \
i386-dicos-tdep.c \
- i386-linux-tdep.c i386-nat.c \
+ i386-linux-tdep.c x86-nat.c \
i386-sol2-nat.c i386-sol2-tdep.c \
i386gnu-nat.c i386gnu-tdep.c \
- ia64-hpux-nat.c ia64-hpux-tdep.c \
ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
- inf-ptrace.c inf-ttrace.c \
- irix5-nat.c \
+ inf-ptrace.c \
ia64-libunwind-tdep.c \
linux-fork.c \
linux-tdep.c \
m68klinux-nat.c m68klinux-tdep.c \
m88k-tdep.c m88kbsd-nat.c \
microblaze-tdep.c microblaze-linux-tdep.c \
- mingw-hdep.c \
+ mingw-hdep.c common/mingw-strerror.c \
mips-linux-nat.c mips-linux-tdep.c \
- mips-irix-tdep.c \
+ mips-sde-tdep.c \
mips-tdep.c \
mipsnbsd-nat.c mipsnbsd-tdep.c \
mips64obsd-nat.c mips64obsd-tdep.c \
msp430-tdep.c \
nios2-tdep.c nios2-linux-tdep.c \
- nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
- solib-osf.c \
- somread.c solib-som.c \
- posix-hdep.c \
+ nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
+ posix-hdep.c common/posix-strerror.c \
ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
ppcfbsd-nat.c ppcfbsd-tdep.c \
ppcnbsd-nat.c ppcnbsd-tdep.c \
ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
sol2-tdep.c \
- solib-irix.c solib-svr4.c \
+ solib-svr4.c \
sparc-linux-nat.c sparc-linux-tdep.c \
sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
- sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
+ sparc64nbsd-nat.c sparc64nbsd-tdep.c \
+ sparc64obsd-nat.c sparc64obsd-tdep.c \
sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
sparc-ravenscar-thread.c \
spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
v850-tdep.c \
- vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
+ vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
windows-nat.c windows-tdep.c \
xcoffread.c \
xstormy16-tdep.c \
-e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e '/^#line.*y.tab.c/d' \
- -e "s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
< $@.tmp > $@
rm -f $@.tmp
.l.c:
$(COMPILE) $(srcdir)/cli/cli-utils.c
$(POSTCOMPILE)
+# GCC Compile support dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+compile.o: $(srcdir)/compile/compile.c
+ $(COMPILE) $(srcdir)/compile/compile.c
+ $(POSTCOMPILE)
+
+compile-c-types.o: $(srcdir)/compile/compile-c-types.c
+ $(COMPILE) $(srcdir)/compile/compile-c-types.c
+ $(POSTCOMPILE)
+
+compile-c-symbols.o: $(srcdir)/compile/compile-c-symbols.c
+ $(COMPILE) $(srcdir)/compile/compile-c-symbols.c
+ $(POSTCOMPILE)
+
+compile-object-load.o: $(srcdir)/compile/compile-object-load.c
+ $(COMPILE) $(srcdir)/compile/compile-object-load.c
+ $(POSTCOMPILE)
+
+compile-object-run.o: $(srcdir)/compile/compile-object-run.c
+ $(COMPILE) $(srcdir)/compile/compile-object-run.c
+ $(POSTCOMPILE)
+
+compile-loc2c.o: $(srcdir)/compile/compile-loc2c.c
+ $(COMPILE) $(srcdir)/compile/compile-loc2c.c
+ $(POSTCOMPILE)
+
+compile-c-support.o: $(srcdir)/compile/compile-c-support.c
+ $(COMPILE) $(srcdir)/compile/compile-c-support.c
+ $(POSTCOMPILE)
+
#
# GDBTK sub-directory
$(COMPILE) $(srcdir)/common/format.c
$(POSTCOMPILE)
-linux-osdata.o: ${srcdir}/common/linux-osdata.c
- $(COMPILE) $(srcdir)/common/linux-osdata.c
+common-agent.o: $(srcdir)/common/agent.c
+ $(COMPILE) $(srcdir)/common/agent.c
$(POSTCOMPILE)
-linux-procfs.o: $(srcdir)/common/linux-procfs.c
- $(COMPILE) $(srcdir)/common/linux-procfs.c
+vec.o: ${srcdir}/common/vec.c
+ $(COMPILE) $(srcdir)/common/vec.c
$(POSTCOMPILE)
-linux-ptrace.o: $(srcdir)/common/linux-ptrace.c
- $(COMPILE) $(srcdir)/common/linux-ptrace.c
+print-utils.o: ${srcdir}/common/print-utils.c
+ $(COMPILE) $(srcdir)/common/print-utils.c
$(POSTCOMPILE)
-common-agent.o: $(srcdir)/common/agent.c
- $(COMPILE) $(srcdir)/common/agent.c
+rsp-low.o: ${srcdir}/common/rsp-low.c
+ $(COMPILE) $(srcdir)/common/rsp-low.c
$(POSTCOMPILE)
-vec.o: ${srcdir}/common/vec.c
- $(COMPILE) $(srcdir)/common/vec.c
+errors.o: ${srcdir}/common/errors.c
+ $(COMPILE) $(srcdir)/common/errors.c
+ $(POSTCOMPILE)
+
+common-debug.o: ${srcdir}/common/common-debug.c
+ $(COMPILE) $(srcdir)/common/common-debug.c
+ $(POSTCOMPILE)
+
+cleanups.o: ${srcdir}/common/cleanups.c
+ $(COMPILE) $(srcdir)/common/cleanups.c
+ $(POSTCOMPILE)
+
+common-exceptions.o: ${srcdir}/common/common-exceptions.c
+ $(COMPILE) $(srcdir)/common/common-exceptions.c
+ $(POSTCOMPILE)
+
+posix-strerror.o: ${srcdir}/common/posix-strerror.c
+ $(COMPILE) $(srcdir)/common/posix-strerror.c
+ $(POSTCOMPILE)
+
+mingw-strerror.o: ${srcdir}/common/mingw-strerror.c
+ $(COMPILE) $(srcdir)/common/mingw-strerror.c
$(POSTCOMPILE)
-linux-btrace.o: ${srcdir}/common/linux-btrace.c
- $(COMPILE) $(srcdir)/common/linux-btrace.c
+btrace-common.o: ${srcdir}/common/btrace-common.c
+ $(COMPILE) $(srcdir)/common/btrace-common.c
$(POSTCOMPILE)
-mips-linux-watch.o: ${srcdir}/common/mips-linux-watch.c
- $(COMPILE) $(srcdir)/common/mips-linux-watch.c
+fileio.o: ${srcdir}/common/fileio.c
+ $(COMPILE) $(srcdir)/common/fileio.c
+ $(POSTCOMPILE)
+
+common-regcache.o: ${srcdir}/common/common-regcache.c
+ $(COMPILE) $(srcdir)/common/common-regcache.c
$(POSTCOMPILE)
#
$(COMPILE) $(srcdir)/target/waitstatus.c
$(POSTCOMPILE)
+#
+# gdb/arch/ dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+arm.o: ${srcdir}/arch/arm.c
+ $(COMPILE) $(srcdir)/arch/arm.c
+ $(POSTCOMPILE)
+
+arm-linux.o: ${srcdir}/arch/arm-linux.c
+ $(COMPILE) $(srcdir)/arch/arm-linux.c
+ $(POSTCOMPILE)
+
+arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c
+ $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c
+ $(POSTCOMPILE)
+
# gdb/nat/ dependencies
#
# Need to explicitly specify the compile rule as make will do nothing
# or try to compile the object file into the sub-directory.
+x86-dregs.o: ${srcdir}/nat/x86-dregs.c
+ $(COMPILE) $(srcdir)/nat/x86-dregs.c
+ $(POSTCOMPILE)
+
+linux-btrace.o: ${srcdir}/nat/linux-btrace.c
+ $(COMPILE) $(srcdir)/nat/linux-btrace.c
+ $(POSTCOMPILE)
+
+linux-osdata.o: ${srcdir}/nat/linux-osdata.c
+ $(COMPILE) $(srcdir)/nat/linux-osdata.c
+ $(POSTCOMPILE)
+
+linux-procfs.o: $(srcdir)/nat/linux-procfs.c
+ $(COMPILE) $(srcdir)/nat/linux-procfs.c
+ $(POSTCOMPILE)
+
+linux-ptrace.o: $(srcdir)/nat/linux-ptrace.c
+ $(COMPILE) $(srcdir)/nat/linux-ptrace.c
+ $(POSTCOMPILE)
+
linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c
$(COMPILE) $(srcdir)/nat/linux-waitpid.c
$(POSTCOMPILE)
+mips-linux-watch.o: ${srcdir}/nat/mips-linux-watch.c
+ $(COMPILE) $(srcdir)/nat/mips-linux-watch.c
+ $(POSTCOMPILE)
+
+ppc-linux.o: ${srcdir}/nat/ppc-linux.c
+ $(COMPILE) $(srcdir)/nat/ppc-linux.c
+ $(POSTCOMPILE)
+
+linux-personality.o: ${srcdir}/nat/linux-personality.c
+ $(COMPILE) $(srcdir)/nat/linux-personality.c
+ $(POSTCOMPILE)
+
+x86-linux.o: ${srcdir}/nat/x86-linux.c
+ $(COMPILE) $(srcdir)/nat/x86-linux.c
+ $(POSTCOMPILE)
+
+x86-linux-dregs.o: ${srcdir}/nat/x86-linux-dregs.c
+ $(COMPILE) $(srcdir)/nat/x86-linux-dregs.c
+ $(POSTCOMPILE)
+
+linux-namespaces.o: ${srcdir}/nat/linux-namespaces.c
+ $(COMPILE) $(srcdir)/nat/linux-namespaces.c
+ $(POSTCOMPILE)
+
+aarch64-linux-hw-point.o: ${srcdir}/nat/aarch64-linux-hw-point.c
+ $(COMPILE) $(srcdir)/nat/aarch64-linux-hw-point.c
+ $(POSTCOMPILE)
+
+aarch64-linux.o: ${srcdir}/nat/aarch64-linux.c
+ $(COMPILE) $(srcdir)/nat/aarch64-linux.c
+ $(POSTCOMPILE)
+
+# gdb/arch/ dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+aarch64-insn.o: ${srcdir}/arch/aarch64-insn.c
+ $(COMPILE) $(srcdir)/arch/aarch64-insn.c
+ $(POSTCOMPILE)
+
#
# gdb/tui/ dependencies
#
$(COMPILE) $(srcdir)/tui/tui-winsource.c
$(POSTCOMPILE)
+# gdb/guile dependencies
#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+guile.o: $(srcdir)/guile/guile.c
+ $(COMPILE) $(srcdir)/guile/guile.c
+ $(POSTCOMPILE)
+
+scm-arch.o: $(srcdir)/guile/scm-arch.c
+ $(COMPILE) $(srcdir)/guile/scm-arch.c
+ $(POSTCOMPILE)
+
+scm-auto-load.o: $(srcdir)/guile/scm-auto-load.c
+ $(COMPILE) $(srcdir)/guile/scm-auto-load.c
+ $(POSTCOMPILE)
+
+scm-block.o: $(srcdir)/guile/scm-block.c
+ $(COMPILE) $(srcdir)/guile/scm-block.c
+ $(POSTCOMPILE)
+
+scm-breakpoint.o: $(srcdir)/guile/scm-breakpoint.c
+ $(COMPILE) $(srcdir)/guile/scm-breakpoint.c
+ $(POSTCOMPILE)
+
+scm-cmd.o: $(srcdir)/guile/scm-cmd.c
+ $(COMPILE) $(srcdir)/guile/scm-cmd.c
+ $(POSTCOMPILE)
+
+scm-disasm.o: $(srcdir)/guile/scm-disasm.c
+ $(COMPILE) $(srcdir)/guile/scm-disasm.c
+ $(POSTCOMPILE)
+
+scm-exception.o: $(srcdir)/guile/scm-exception.c
+ $(COMPILE) $(srcdir)/guile/scm-exception.c
+ $(POSTCOMPILE)
+
+scm-frame.o: $(srcdir)/guile/scm-frame.c
+ $(COMPILE) $(srcdir)/guile/scm-frame.c
+ $(POSTCOMPILE)
+
+scm-gsmob.o: $(srcdir)/guile/scm-gsmob.c
+ $(COMPILE) $(srcdir)/guile/scm-gsmob.c
+ $(POSTCOMPILE)
+
+scm-iterator.o: $(srcdir)/guile/scm-iterator.c
+ $(COMPILE) $(srcdir)/guile/scm-iterator.c
+ $(POSTCOMPILE)
+
+scm-lazy-string.o: $(srcdir)/guile/scm-lazy-string.c
+ $(COMPILE) $(srcdir)/guile/scm-lazy-string.c
+ $(POSTCOMPILE)
+
+scm-math.o: $(srcdir)/guile/scm-math.c
+ $(COMPILE) $(srcdir)/guile/scm-math.c
+ $(POSTCOMPILE)
+
+scm-objfile.o: $(srcdir)/guile/scm-objfile.c
+ $(COMPILE) $(srcdir)/guile/scm-objfile.c
+ $(POSTCOMPILE)
+
+scm-param.o: $(srcdir)/guile/scm-param.c
+ $(COMPILE) $(srcdir)/guile/scm-param.c
+ $(POSTCOMPILE)
+
+scm-ports.o: $(srcdir)/guile/scm-ports.c
+ $(COMPILE) $(srcdir)/guile/scm-ports.c
+ $(POSTCOMPILE)
+
+scm-pretty-print.o: $(srcdir)/guile/scm-pretty-print.c
+ $(COMPILE) $(srcdir)/guile/scm-pretty-print.c
+ $(POSTCOMPILE)
+
+scm-progspace.o: $(srcdir)/guile/scm-progspace.c
+ $(COMPILE) $(srcdir)/guile/scm-progspace.c
+ $(POSTCOMPILE)
+
+scm-safe-call.o: $(srcdir)/guile/scm-safe-call.c
+ $(COMPILE) $(srcdir)/guile/scm-safe-call.c
+ $(POSTCOMPILE)
+
+scm-string.o: $(srcdir)/guile/scm-string.c
+ $(COMPILE) $(srcdir)/guile/scm-string.c
+ $(POSTCOMPILE)
+
+scm-symbol.o: $(srcdir)/guile/scm-symbol.c
+ $(COMPILE) $(srcdir)/guile/scm-symbol.c
+ $(POSTCOMPILE)
+
+scm-symtab.o: $(srcdir)/guile/scm-symtab.c
+ $(COMPILE) $(srcdir)/guile/scm-symtab.c
+ $(POSTCOMPILE)
+
+scm-type.o: $(srcdir)/guile/scm-type.c
+ $(COMPILE) $(srcdir)/guile/scm-type.c
+ $(POSTCOMPILE)
+
+scm-utils.o: $(srcdir)/guile/scm-utils.c
+ $(COMPILE) $(srcdir)/guile/scm-utils.c
+ $(POSTCOMPILE)
+
+scm-value.o: $(srcdir)/guile/scm-value.c
+ $(COMPILE) $(srcdir)/guile/scm-value.c
+ $(POSTCOMPILE)
+
# gdb/python/ dependencies
#
# Need to explicitly specify the compile rule as make will do nothing
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c
$(POSTCOMPILE)
+py-xmethods.o: $(srcdir)/python/py-xmethods.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-xmethods.c
+ $(POSTCOMPILE)
+
py-event.o: $(srcdir)/python/py-event.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c
$(POSTCOMPILE)
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c
$(POSTCOMPILE)
+py-infevents.o: $(srcdir)/python/py-infevents.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infevents.c
+ $(POSTCOMPILE)
+
py-infthread.o: $(srcdir)/python/py-infthread.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c
$(POSTCOMPILE)
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
$(POSTCOMPILE)
+py-unwind.o: $(srcdir)/python/py-unwind.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-unwind.c
+ $(POSTCOMPILE)
+
py-utils.o: $(srcdir)/python/py-utils.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
$(POSTCOMPILE)
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
$(POSTCOMPILE)
+py-varobj.o: $(srcdir)/python/py-varobj.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-varobj.c
+ $(POSTCOMPILE)
+
#
# Dependency tracking. Most of this is conditional on GNU Make being
# found by configure; if GNU Make is not found, we fall back to a