SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
-SUBDIR_CLI_DEPS =
-SUBDIR_CLI_LDFLAGS =
-SUBDIR_CLI_CFLAGS =
-
#
# MI sub directory definitons
#
SUBDIR_UNITTESTS_SRCS = \
unittests/array-view-selftests.c \
+ unittests/cli-utils-selftests.c \
unittests/common-utils-selftests.c \
unittests/environ-selftests.c \
unittests/format_pieces-selftests.c \
unittests/offset-type-selftests.c \
unittests/observable-selftests.c \
unittests/optional-selftests.c \
+ unittests/parse-connection-spec-selftests.c \
unittests/ptid-selftests.c \
unittests/rsp-low-selftests.c \
unittests/scoped_fd-selftests.c \
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
+ $(XM_CLIBS) $(GDBTKLIBS) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR)
-CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
+CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
-ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-
DIST = gdb
-LINT = /usr/5bin/lint
-LINTFLAGS = $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
- $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
- $(INTL_CFLAGS)
-
RUNTEST = runtest
RUNTESTFLAGS =
breakpoint.c \
btrace.c \
build-id.c \
+ buildsym-legacy.c \
buildsym.c \
c-lang.c \
c-typeprint.c \
common/job-control.c \
common/gdb_tilde_expand.c \
common/gdb_vecs.c \
+ common/netstuff.c \
common/new-op.c \
common/pathstuff.c \
common/print-utils.c \
common/ptid.c \
common/rsp-low.c \
common/run-time-clock.c \
+ common/scoped_mmap.c \
common/signals.c \
common/signals-state-save-restore.c \
common/tdesc.c \
event-loop.c \
event-top.c \
exceptions.c \
+ exec.c \
expprint.c \
extension.c \
f-lang.c \
infcall.c \
infcmd.c \
inferior.c \
+ inflow.c \
infrun.c \
inline-frame.c \
interps.c \
f-exp.y \
gdb.c \
go-exp.y \
- inflow.c \
m2-exp.y \
p-exp.y \
proc-service.list \
symfile-mem.c \
ui-file.h \
mi/mi-common.c \
+ $(SUBDIR_CLI_SRCS) \
$(SUBDIR_TARGET_SRCS) \
$(COMMON_SFILES) \
$(SUBDIR_GCC_COMPILE_SRCS)
-LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
-
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
# so that each .h file is listed exactly once (M-x tags-search works
bsd-kvm.h \
bsd-uthread.h \
build-id.h \
+ buildsym-legacy.h \
buildsym.h \
c-lang.h \
charset.h \
common/gdb_vecs.h \
common/gdb_wait.h \
common/common-inferior.h \
+ common/netstuff.h \
common/host-defs.h \
common/pathstuff.h \
common/print-utils.h \
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
- exec.o \
mi/mi-common.o \
version.o \
xml-builtin.o \
$(patsubst %.c,%.o,$(COMMON_SFILES)) \
+ $(SUBDIR_CLI_OBS) \
$(SUBDIR_TARGET_OBS) \
$(SUBDIR_GCC_COMPILE_OBS)
-TSOBS = inflow.o
-
SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
CLEANDIRS = $(SUBDIRS)
# automatically adds the $(srcdir) prefixes when it encounters files
# in sub-directories such as cli/ and mi/.
-# NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
-# duplicates. Files in the gdb/ directory can end up appearing in
-# COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
-
-INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS) $(SUBDIR_GCC_COMPILE_SRCS)
-init.c: $(INIT_FILES)
+INIT_FILES = $(COMMON_OBS)
+init.c: stamp-init; @true
+stamp-init: $(INIT_FILES)
@$(ECHO_INIT_C) echo "Making init.c"
@rm -f init.c-tmp init.l-tmp
@touch init.c-tmp
sed \
-e '/^gdbtypes.[co]$$/d' \
-e '/^init.[co]$$/d' \
- -e '/xdr_ld.[co]$$/d' \
- -e '/xdr_ptrace.[co]$$/d' \
- -e '/xdr_rdb.[co]$$/d' \
- -e '/udr.[co]$$/d' \
- -e '/udip2soc.[co]$$/d' \
- -e '/udi2go32.[co]$$/d' \
-e '/version.[co]$$/d' \
-e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
- -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
-e 's/-exp\.o$$/-exp.y/' \
- -e 's/\.[co]$$/.c/' \
- -e 's,signals\.c,common/signals\.c,' \
+ -e 's/\.o$$/.c/' \
-e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
while read f; do \
sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
- done | \
- while read f; do \
- case " $$fs " in \
- *" $$f "* ) ;; \
- * ) echo $$f ; fs="$$fs $$f";; \
- esac; \
done >> init.l-tmp
@echo '/* Do not modify this file. */' >>init.c-tmp
@echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
@echo '{' >>init.c-tmp
@sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
@echo '}' >>init.c-tmp
- @rm init.l-tmp
- @mv init.c-tmp init.c
+ @$(SHELL) $(srcdir)/../move-if-change init.c-tmp init.c
+ @echo stamp > stamp-init
.PRECIOUS: init.c
# against that.
#
# init.o is very important. It pulls in the rest of GDB.
-LIBGDB_OBS = $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
+LIBGDB_OBS = $(COMMON_OBS) init.o
libgdb.a: $(LIBGDB_OBS)
-rm -f libgdb.a
$(AR) q libgdb.a $(LIBGDB_OBS)
$(RANLIB) libgdb.a
# Removing the old gdb first works better if it is running, at least on SunOS.
-gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
+gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(CDEPS) $(TDEPLIBS)
$(SILENCE) rm -f gdb$(EXEEXT)
$(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
clean mostlyclean: $(CONFIG_CLEAN)
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
- rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
- rm -f init.c version.c
+ rm -f *.o *.a *~ init.c-tmp init.l-tmp version.c-tmp
+ rm -f init.c stamp-init version.c stamp-version
rm -f gdb$(EXEEXT) core make.log
rm -f gdb[0-9]$(EXEEXT)
rm -f test-cp-name-parser$(EXEEXT)
< $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
mv $(srcdir)/copying.tmp $(srcdir)/copying.c
-version.c: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
+version.c: stamp-version; @true
+# Note that the obvious names for the temp file are taken by
+# create-version.sh.
+stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
$(ECHO_GEN) $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
- $(host_alias) $(target_alias) version.c
+ $(host_alias) $(target_alias) version-t.t
+ @$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
+ @echo stamp > stamp-version
-lint: $(LINTFILES)
- $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
- `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
bsd-uthread.c \
darwin-nat.c \
dicos-tdep.c \
- exec.c \
fbsd-nat.c \
fbsd-tdep.c \
fork-child.c \
# Makefile.in, but that was a pretty big annoyance.
%.c: %.y
- $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS) \
- || (rm -f $@.tmp; false)
- sed -e '/extern.*malloc/d' \
+ $(ECHO_YACC) $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- \
+ $(YACC) $(YFLAGS) || (rm -f $@.tmp; false)
+ @sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
rm -f $@.tmp && \
mv $@.new $@
%.c: %.l
- if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
- $(FLEX) -t $< \
+ $(ECHO_LEX) $(FLEX) -t $< \
| sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e 's/yy_flex_xrealloc/yyxrealloc/g' \
> $@.new && \
- mv $@.new $@; \
- elif [ -f $@ ]; then \
- echo "Warning: $*.c older than $*.l and flex not available."; \
- else \
- echo "$@ missing and flex not available."; \
- false; \
- fi
+ mv $@.new $@
.PRECIOUS: ada-lex.c
rm -f insight$(EXEEXT)
# Removing the old gdb first works better if it is running, at least on SunOS.
-insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
- $(CDEPS) $(TDEPLIBS)
+insight$(EXEEXT): gdbtk-main.o libgdb.a $(CDEPS) $(TDEPLIBS)
rm -f insight$(EXEEXT)
$(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-o insight$(EXEEXT) gdbtk-main.o libgdb.a \
projects / deliverable / binutils-gdb.git / blobdiff