# routines in libiberty.
INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
-# Where is the "-liberty" library, containing getopt and obstack?
+
+# Where is the "-liberty" library? Typically in ../libiberty.
LIBIBERTY = ../libiberty/libiberty.a
-# Where is the MMALLOC library? Typically ../mmalloc.
+# Where is the MMALLOC library? Typically in ../mmalloc.
# Note that mmalloc can still be used on systems without mmap().
# To use your system malloc, comment out the following defines.
-MMALLOC = ../mmalloc/libmmalloc.a
+MMALLOC_DIR = ../mmalloc
+MMALLOC = $(MMALLOC_DIR)/libmmalloc.a
# To use your system malloc, uncomment MMALLOC_DISABLE.
#MMALLOC_DISABLE = -DNO_MMALLOC
# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
-MMALLOC_CFLAGS = $(MMALLOC_CHECK) $(MMALLOC_DISABLE)
+MMALLOC_CFLAGS = -I$(srcdir)/$(MMALLOC_DIR) $(MMALLOC_CHECK) $(MMALLOC_DISABLE)
-# Where are the BFD library?
+# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
BFD_SRC = $(srcdir)/$(BFD_DIR)
# in INCLUDE_DIR.
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
-OPCODES = ./../opcodes/libopcodes.a
+OPCODES = ../opcodes/libopcodes.a
# Where are the other opcode tables which only have header file
# versions?
OP_INCLUDE = $(INCLUDE_DIR)/opcode
OPCODES_CFLAGS = -I$(OP_INCLUDE)
+# Where is the TCL library? Typically in ../tcl.
+TCL_DIR = ../tcl
+TCL = -L$(TCL_DIR) -ltcl
+TCL_SRC = $(srcdir)/$(TCL_DIR)
+TCL_CFLAGS = -I$(TCL_SRC)
+
+# Where is the TK library? Typically in ../tk.
+TK_DIR = ../tk
+TK = -L$(TK_DIR) -ltk
+TK_SRC = $(srcdir)/$(TK_DIR)
+TK_CFLAGS = -I$(TK_SRC)
+
# All the includes used for CFLAGS and for lint.
# -I. for config files.
# -I$(srcdir) for gdb internal headers and possibly for regex.h also.
# If you have the Cygnus libraries installed,
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline $(TERMCAP) -lopcodes -lmmalloc \
- -liberty $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS)
+ -liberty $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(ENABLE_CLIBS)
CLIBS = $(BFD) $(READLINE) $(OPCODES) $(MMALLOC) \
- $(LIBIBERTY) $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS)
+ $(LIBIBERTY) $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) \
+ $(ENABLE_CLIBS)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) \
$(BFD) $(READLINE) $(OPCODES) $(MMALLOC) $(LIBIBERTY)
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION = 4.12.4
+VERSION = 4.13.1
DIST=gdb
LINT=/usr/5bin/lint
# but not all (e.g. 960)
REMOTE_O = remote.o dcache.o remote-utils.o
+ANNOTATE_OBS = annotate.o
+
# Host and target-dependent makefile fragments come in here.
####
# End of host and target-dependent makefile fragments
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../newlib/Makefile ] ; then \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc; \
+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L$${rootme}/../../newlib -B$${rootme}/../../newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
fi`
CXX = gcc
-
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
if [ -f $${rootme}/../newlib/Makefile ] ; then \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc; \
+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L$${rootme}/../../newlib -B$${rootme}/../../newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
fi; \
fi`
-NWSOURCE = /gaunt/grossman/unsupported/Novell
-NWINCLUDES = $(NWSOURCE)/novh40
-
LD_FOR_TARGET = ` \
if [ -f $${rootme}/../ld/ld.new ] ; then \
echo $${rootme}/../ld/ld.new; \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
+ "BISON=$(BISON)" \
'CC=$$(CC_FOR_TARGET)' \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
'CXX=$$(CXX_FOR_TARGET)' \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"CXXFLAGS=$(CXXFLAGS)" \
- "MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
+ "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
+ "MAKEINFO=$(MAKEINFO)" \
+ "NLMCONV_FOR_TARGET=$(NLMCONV_FOR_TARGET)" \
"RUNTEST=$(RUNTEST)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
- "BISON=$(BISON)"
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)"
# All source files that go into linking GDB.
# Links made at configuration time should not be specified here, since
SFILES = blockframe.c breakpoint.c buildsym.c c-exp.y c-lang.c \
c-typeprint.c c-valprint.c ch-exp.y ch-lang.c ch-typeprint.c \
ch-valprint.c coffread.c command.c complaints.c core.c cp-valprint.c \
- dbxread.c demangle.c dwarfread.c elfread.c environ.c eval.c expprint.c \
- findvar.c gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+ dbxread.c demangle.c dwarfread.c \
+ elfread.c environ.c eval.c expprint.c \
+ f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c \
+ gdbtypes.c infcmd.c inflow.c infrun.c language.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
printcmd.c remote.c source.c stabsread.c stack.c symfile.c symmisc.c \
typeprint.c utils.c valarith.c valops.c \
valprint.c values.c serial.c ser-unix.c mdebugread.c os9kread.c
-# Files that are not source code, but need to go into
-# gdb-$(VERSION).tar.Z.
-
-NONSRC = Makefile.in configure.in ChangeLog ChangeLog-9091 \
- ChangeLog-92 ChangeLog-93 ChangeLog-3.x \
- gdb.1 refcard.ps README TODO TAGS NEWS \
- Projects .gdbinit COPYING $(YYFILES) copying.c copying.awk \
- saber.suppress standalone.c stuff.c kdb-start.c gcc.patch \
- nindy-share/Makefile nindy-share/VERSION nindy-share/README \
- vx-share/README 29k-share/README config/convex/Convex.notes \
- i386-nlmstub.c
-
# All source files that lint should look at
LINTFILES = $(SFILES) $(YYFILES) init.c
-# Any additional files specified on these lines should also be added to
-# the NONSRC definition, so they go in the tar files.
-SFILES_STAND = $(SFILES) standalone.c
-SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
-
# "system" headers. Using these in dependencies is a rather personal
# choice. (-rich, summer 1993)
# (Why would we not want to depend on them? If one of these changes in a
gdb-stabs.h $(inferior_h) language.h minimon.h monitor.h \
objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
- c-lang.h ch-lang.h m2-lang.h complaints.h ns32k-opcode.h valprint.h \
- config/m68k/tm-m68k.h config/pa/tm-hppa.h config/i960/tm-i960.h \
- config/sparc/tm-sparc.h config/tm-lynx.h config/tm-sunos.h \
- config/tm-sysv4.h \
- config/m68k/xm-m68k.h config/sparc/xm-sparc.h \
- config/xm-lynx.h config/xm-sysv4.h \
- config/vax/xm-vax.h config/nm-m3.h config/nm-trash.h \
+ c-lang.h ch-lang.h f-lang.h m2-lang.h \
+ complaints.h valprint.h \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
nindy-share/env.h nindy-share/stop.h \
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
-DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) $(REMOTE_O)
+DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) $(REMOTE_O) \
+ $(ENABLE_DEPFILES)
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
# and it's more useful to see it in the .y file.
TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
- $(ALLPARAM) $(POSSLIBS)
+ $(POSSLIBS)
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
-TARFILES = $(SFILES) $(HFILES_NO_SRCDIR) $(HFILES_WITH_SRCDIR) \
- $(NONSRC) $(ALLDEPFILES) $(ALLCONFIG) \
- $(ALLPARAM) $(INFOFILES) $(POSSLIBS) $(REMOTE_EXAMPLES)
-
-
COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
expprint.o environ.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
- objfiles.o minsyms.o maint.o demangle.o dbxread.o coffread.o elfread.o \
- dwarfread.o mipsread.o stabsread.o core.o c-lang.o ch-lang.o m2-lang.o \
- complaints.o typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
- c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o nlmread.o \
- serial.o mdebugread.o os9kread.o top.o utils.o
+ exec.o objfiles.o minsyms.o maint.o demangle.o \
+ dbxread.o coffread.o elfread.o \
+ dwarfread.o mipsread.o stabsread.o core.o \
+ c-lang.o ch-lang.o f-lang.o m2-lang.o \
+ complaints.o typeprint.o \
+ c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
+ c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
+ nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o
-OBS = $(COMMON_OBS) main.o annotate.o
+OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
LIBGDB_OBS =
NTSSTART = kdb-start.o
-SUBDIRS = doc testsuite
+SUBDIRS = doc testsuite nlm
# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
-YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
+YYFILES = c-exp.tab.c f-exp.tab.c m2-exp.tab.c ch-exp.tab.c
+YYOBJ = c-exp.tab.o f-exp.tab.o m2-exp.tab.o ch-exp.tab.o
# Things which need to be built when making a distribution.
$(CC-LD) $(INTERNAL_LDFLAGS) -o gdb \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
-prelude.o: $(NWSOURCE)/prelude.c
- rootme=`pwd`; export rootme; rootsrc=`cd $(srcdir); pwd`; export rootsrc; $(CC_FOR_TARGET) -g -I $(NWINCLUDES) -c $(NWSOURCE)/prelude.c
-
-i386-nlmstub.o: $(srcdir)/i386-nlmstub.c
- rootme=`pwd`; export rootme; rootsrc=`cd $(srcdir); pwd`; export rootsrc; $(CC_FOR_TARGET) -g -I $(NWINCLUDES) -c $(srcdir)/i386-nlmstub.c
-
-nlmstub.o: prelude.o i386-nlmstub.o
- rootme=`pwd`; export rootme; $(LD_FOR_TARGET) -r -o nlmstub.o prelude.o i386-nlmstub.o
-
-nlmstub.nlm: nlmstub.o $(srcdir)/nlmstub.def
- rootme=`pwd`; export rootme; $(NLMCONV_FOR_TARGET) -T $(srcdir)/nlmstub.def nlmstub.o nlmstub.nlm
-
-nlmstub: nlmstub.nlm
+nlm: force
+ rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
# libproc is not listed here because all-libproc is a dependency of all-gui,
# not all-gdb, and thus might be built after us.
echo $(srcdir)/$$i ; \
done ; for i in $(TAGFILES_WITH_SRCDIR); do \
echo $$i ; \
- done) | sed -e 's/\.o$$/\.c/'`
+ done) | sed -e 's/\.o$$/\.c/'` \
+ `find $(srcdir)/config -name '*.h' -print`
tags: TAGS
realclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS $(INFOFILES)
+ rm -f c-exp.tab.c f-exp.tab.c m2-exp.tab.c ch-exp.tab.c
+ rm -f TAGS $(INFOFILES)
rm -f nm.h tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f Makefile
-rm y.tab.c
mv c-exp.new ./c-exp.tab.c
+f-exp.tab.o: f-exp.tab.c
+f-exp.tab.c: f-exp.y c-exp.tab.c
+ $(YACC) $(YFLAGS) $(srcdir)/f-exp.y
+ -sed -e '/extern.*malloc/d' \
+ -e '/extern.*realloc/d' \
+ -e '/extern.*free/d' \
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ < y.tab.c > f-exp.new
+ -rm y.tab.c
+ mv f-exp.new ./f-exp.tab.c
+
# ch-exp.tab.c is generated in objdir from ch-exp.y if it doesn't exist
# in srcdir, then compiled in objdir to ch-exp.tab.o.
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
ch-exp.tab.o: ch-exp.tab.c
-# the dependency here on c-exp.tab.c is artificial. Without this
+# the dependency here on f-exp.tab.c is artificial. Without this
# dependency, a parallel make will attempt to build both at the same
# time and the second yacc will pollute the first y.tab.c file.
-ch-exp.tab.c: ch-exp.y c-exp.tab.c
+ch-exp.tab.c: ch-exp.y f-exp.tab.c
$(YACC) $(YFLAGS) $(srcdir)/ch-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
mv m2-exp.new ./m2-exp.tab.c
# These files are updated atomically, so make never has to remove them
-.PRECIOUS: m2-exp.tab.c ch-exp.tab.c c-exp.tab.c
+.PRECIOUS: m2-exp.tab.c ch-exp.tab.c f-exp.tab.c c-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
# These are things from config/*/*.m? fragments. There is no good reason
# why they are separate from the lists of files above.
+HPREAD_SOURCE=
+# start-sanitize-hpread
+HPREAD_SOURCE=hpread.c
+# end-sanitize-hpread
+
ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
29k-share/udi/udi2go32.c \
a29k-pinsn.c a29k-tdep.c a68v-nat.c alpha-nat.c alpha-tdep.c \
nindy-share/Onindy.c nindy-share/nindy.c \
nindy-share/ttyflush.c nindy-tdep.c \
ns32k-pinsn.c ns32km3-nat.c osfsolib.c \
- somread.c procfs.c pyr-pinsn.c pyr-tdep.c pyr-xdep.c \
+ somread.c $(HPREAD_SOURCE) procfs.c pyr-pinsn.c pyr-tdep.c pyr-xdep.c \
remote-adapt.c remote-bug.c remote-e7000.c remote-eb.c remote-es.c \
remote-hms.c remote-mips.c \
remote-mm.c remote-mon.c remote-nindy.c remote-os9k.c remote-sim.c \
tahoe-pinsn.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
vax-pinsn.c \
vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
- xcoffexec.c xcoffread.c xcoffsolib.c z8k-tdep.c
-
-ALLPARAM = config/a29k/nm-ultra3.h config/a29k/tm-a29k.h \
- config/a29k/tm-ultra3.h config/a29k/xm-ultra3.h \
- config/alpha/nm-alpha.h config/alpha/tm-alpha.h \
- config/alpha/xm-alpha.h config/arm/tm-arm.h \
- config/arm/xm-arm.h config/convex/tm-convex.h \
- config/convex/xm-convex.h config/gould/tm-np1.h config/gould/tm-pn.h \
- config/gould/xm-np1.h config/gould/xm-pn.h config/h8300/tm-h8300.h \
- config/h8500/tm-h8500.h config/i386/nm-i386aix.h \
- config/i386/nm-i386bsd.h config/i386/nm-i386lynx.h \
- config/i386/nm-i386mach.h config/i386/nm-i386sco.h \
- config/i386/nm-i386sco4.h config/i386/nm-i386v.h \
- config/i386/nm-i386v4.h config/i386/nm-linux.h \
- config/i386/nm-sun386.h config/i386/nm-symmetry.h \
- config/i386/tm-i386aix.h config/i386/tm-i386bsd.h \
- config/i386/tm-i386lynx.h config/i386/tm-i386m3.h \
- config/i386/tm-i386mk.h config/i386/tm-i386nw.h \
- config/i386/tm-i386v.h \
- config/i386/tm-i386v4.h config/i386/tm-linux.h \
- config/i386/tm-sun386.h \
- config/i386/tm-symmetry.h config/i386/xm-go32.h \
- config/i386/xm-i386aix.h config/i386/xm-i386bsd.h \
- config/i386/xm-i386lynx.h config/i386/xm-i386mach.h \
- config/i386/xm-i386m3.h config/i386/xm-i386mk.h \
- config/i386/xm-i386sco.h config/i386/xm-i386v.h \
- config/i386/xm-i386v32.h config/i386/xm-i386v4.h \
- config/i386/xm-linux.h config/i386/xm-sun386.h \
- config/i386/xm-symmetry.h config/i960/tm-nindy960.h \
- config/i960/tm-vx960.h config/m68k/nm-apollo68b.h \
- config/m68k/nm-apollo68v.h config/m68k/nm-delta68.h \
- config/m68k/nm-dpx2.h config/m68k/nm-hp300bsd.h \
- config/m68k/nm-hp300hpux.h config/m68k/nm-news.h \
- config/m68k/nm-m68klynx.h \
- config/m68k/nm-sun2.h \
- config/m68k/nm-sun3.h config/m68k/tm-3b1.h config/m68k/tm-altos.h \
- config/m68k/tm-apollo68b.h \
- config/m68k/tm-amix.h \
- config/m68k/tm-cisco.h config/m68k/tm-delta68.h \
- config/m68k/tm-dpx2.h config/m68k/tm-es1800.h \
- config/m68k/tm-hp300bsd.h config/m68k/tm-hp300hpux.h \
- config/m68k/tm-isi.h config/m68k/tm-m68klynx.h \
- config/m68k/tm-monitor.h \
- config/m68k/tm-news.h config/m68k/tm-os68k.h config/m68k/tm-st2000.h \
- config/m68k/tm-sun2.h config/m68k/tm-sun2os4.h config/m68k/tm-sun3.h \
- config/m68k/tm-sun3os4.h config/m68k/tm-vx68.h config/m68k/xm-3b1.h \
- config/m68k/xm-altos.h config/m68k/xm-amix.h \
- config/m68k/xm-apollo68b.h config/m68k/xm-apollo68v.h \
- config/m68k/xm-delta68.h config/m68k/xm-dpx2.h \
- config/m68k/xm-hp300bsd.h config/m68k/xm-hp300hpux.h \
- config/m68k/xm-isi.h config/m68k/xm-m68klynx.h \
- config/m68k/xm-news.h config/m68k/xm-news1000.h \
- config/m68k/xm-sun2.h config/m68k/xm-sun3.h config/m68k/xm-sun3os4.h \
- config/m88k/nm-delta88v4.h config/m88k/nm-m88k.h \
- config/m88k/tm-delta88.h \
- config/m88k/tm-delta88v4.h config/m88k/tm-m88k.h \
- config/m88k/xm-delta88.h config/m88k/xm-delta88v4.h \
- config/m88k/xm-dgux.h config/m88k/xm-m88k.h \
- config/mips/nm-irix3.h \
- config/mips/nm-irix4.h config/mips/nm-irix5.h \
- config/mips/nm-mips.h config/mips/nm-riscos.h \
- config/mips/nm-news-mips.h config/mips/tm-bigmips.h \
- config/mips/tm-bigmips64.h \
- config/mips/tm-idt.h config/mips/tm-idtl.h \
- config/mips/tm-idt64.h config/mips/tm-idtl64.h \
- config/mips/tm-irix3.h config/mips/tm-irix5.h \
- config/mips/tm-mips.h config/mips/tm-mips64.h \
- config/mips/tm-mipsm3.h config/mips/tm-mipsv4.h \
- config/mips/xm-irix3.h \
- config/mips/xm-irix4.h config/mips/xm-irix5.h \
- config/mips/xm-mips.h \
- config/mips/xm-mipsm3.h config/mips/xm-mipsv4.h \
- config/mips/xm-riscos.h config/mips/xm-news-mips.h \
- config/nm-lynx.h config/nm-sysv4.h \
- config/none/nm-none.h config/none/tm-none.h config/none/xm-none.h \
- config/ns32k/nm-umax.h \
- config/ns32k/tm-ns32km3.h \
- config/ns32k/tm-merlin.h config/ns32k/tm-umax.h \
- config/ns32k/xm-ns32km3.h \
- config/ns32k/xm-merlin.h config/ns32k/xm-umax.h \
- config/pa/nm-hppab.h \
- config/pa/nm-hppah.h config/pa/tm-hppab.h config/pa/tm-hppah.h \
- config/pa/xm-hppab.h config/pa/xm-hppah.h config/pa/xm-pa.h \
- config/pyr/tm-pyr.h \
- config/pyr/xm-pyr.h config/romp/xm-rtbsd.h config/rs6000/nm-rs6000.h \
- config/rs6000/tm-rs6000ly.h config/rs6000/xm-rs6000ly.h \
- config/rs6000/nm-rs6000ly.h \
- config/rs6000/tm-rs6000.h config/rs6000/xm-rs6000.h config/sh/tm-sh.h \
- config/sparc/nm-sun4os4.h config/sparc/nm-sparclynx.h \
- config/sparc/tm-sparclite.h config/sparc/tm-sparclynx.h \
- config/sparc/tm-spc-em.h config/sparc/tm-sun4os4.h \
- config/sparc/tm-sun4sol2.h config/sparc/tm-vxsparc.h \
- config/sparc/xm-sparclynx.h \
- config/sparc/xm-sun4os4.h config/sparc/xm-sun4sol2.h \
- config/tahoe/tm-tahoe.h config/tahoe/xm-tahoe.h config/vax/nm-vax.h \
- config/vax/tm-vax.h config/vax/xm-vaxbsd.h config/vax/xm-vaxult.h \
- config/vax/xm-vaxult2.h config/z8k/tm-z8k.h
+ xcoffread.c xcoffsolib.c z8k-tdep.c
ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt \
config/a29k/a29k.mt config/a29k/ultra3.mh config/a29k/ultra3.mt \
c-valprint.o: c-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h)
+f-lang.o: f-lang.c f-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h parser-defs.h $(symtab_h)
+
+f-typeprint.o: f-typeprint.c f-lang.h $(defs_h) $(expression_h) \
+ $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
+ typeprint.h $(value_h)
+
+f-valprint.o: f-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h $(symtab_h) valprint.h $(value_h)
+
ch-lang.o: ch-lang.c ch-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
coffread.o: coffread.c $(bfd_h) $(breakpoint_h) buildsym.h \
complaints.h $(defs_h) $(expression_h) $(gdbtypes_h) objfiles.h \
- symfile.h $(symtab_h) gdb-stabs.h stabsread.h
+ symfile.h $(symtab_h) gdb-stabs.h stabsread.h target.h
command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbtypes_h) $(symtab_h) $(value_h)
core.o: core.c $(dis-asm_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h language.h
-coredep.o: coredep.c $(defs_h) $(gdbcore_h) $(value_h)
+coredep.o: coredep.c $(defs_h) $(gdbcore_h) $(value_h) $(inferior_h)
corelow.o: corelow.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h thread.h
fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h thread.h
+gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
+ $(bfd_h) symfile.h objfiles.h target.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(srcdir)/gdbtk.c \
+ -DGDBTK_FILENAME=\"$(libdir)/gdbtk.tcl\"
+
gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
$(value_h)
main.o: main.c top.h $(defs_h)
-annotate.o: annotate.c annotate.h $(defs_h) value.h target.h $(gdbtypes_h)
-
maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) language.h \
$(expression_h)
nindy-tdep.o: nindy-tdep.c $(defs_h) $(frame_h) $(symtab_h)
-ns32k-pinsn.o: ns32k-pinsn.c $(defs_h) $(gdbcore_h) ns32k-opcode.h \
- $(symtab_h)
+ns32k-pinsn.o: ns32k-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
objfiles.o: objfiles.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
$(symtab_h)
somread.o: somread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h)
+# start-sanitize-hpread
+hpread.o: hpread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+ gdb-stabs.h objfiles.h symfile.h $(symtab_h)
+# end-sanitize-hpread
+
parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h)
remote-vx.o: remote-vx.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
- vx-share/xdr_rdb.h
+ vx-share/xdr_rdb.h gdb-stabs.h objfiles.h symfile.h $(bfd_h)
remote-z8k.o: remote-z8k.c $(wait_h) $(srcdir)/../sim/z8k/sim.h \
$(defs_h) $(gdbcore_h) $(inferior_h) target.h terminal.h
vx-share/vxWorks.h vx-share/xdr_rdb.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_rdb.c
-xcoffexec.o: xcoffexec.c $(BFD_SRC)/libbfd.h $(defs_h) $(gdbcmd_h) \
- $(gdbcore_h) $(inferior_h) objfiles.h symfile.h target.h xcoffsolib.h
-
xcoffread.o: xcoffread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
$(INCLUDE_DIR)/aout/stab_gnu.h $(INCLUDE_DIR)/coff/internal.h \
$(INCLUDE_DIR)/coff/rs6000.h $(BFD_SRC)/libcoff.h buildsym.h \
projects / deliverable / binutils-gdb.git / blobdiff