-# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+# 1998, 1999, 2000 Free Software Foundation, Inc.
# This file is part of GDB.
# Profiling options need to go here to work.
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
-INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS) @HLDFLAGS@
+INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS) @HLDFLAGS@
HLDENV = @HLDENV@
# If your system is missing alloca(), or, more likely, it's there but
# part of libiberty) a POSIX interface. But at least for now the
# host-dependent makefile fragment might need to use something else
# besides ser-unix.o
-SER_HARDWIRE = ser-unix.o ser-pipe.o
+SER_HARDWIRE = @SER_HARDWIRE@
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
+ "infodir=$(infodir)" \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
demangle.c dwarfread.c dwarf2read.c elfread.c environ.c eval.c \
event-loop.c event-top.c \
expprint.c f-exp.y f-lang.c f-typeprint.c f-valprint.c \
- findvar.c gdbarch.c arch-utils.c gdbtypes.c \
+ findvar.c regcache.c gdbarch.c arch-utils.c gdbtypes.c \
inf-loop.c infcmd.c inflow.c infrun.c language.c \
kod.c kod-cisco.c \
ui-out.c cli-out.c \
varobj.c wrapper.c \
jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
- mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
+ mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c \
+ p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c \
printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c \
scm-valprint.c source.c stabsread.c stack.c symfile.c \
- symmisc.c symtab.c target.c thread.c top.c tracepoint.c \
+ symmisc.c symtab.c linespec.c target.c thread.c top.c tracepoint.c \
typeprint.c utils.c valarith.c valops.c valprint.c values.c \
serial.c ser-unix.c mdebugread.c os9kread.c \
tui/tui.c tui/tui.h tui/tuiCommand.c tui/tuiCommand.h \
gdbcmd_h = gdbcmd.h $(command_h)
call_cmds_h = call-cmds.h
-defs_h = defs.h xm.h tm.h nm.h config.status config.h gdbarch.h ui-file.h
+xm_h = @xm_h@
+tm_h = @tm_h@
+nm_h = @nm_h@
+defs_h = defs.h $(xm_h) $(tm_h) $(nm_h) config.status config.h gdbarch.h ui-file.h
top_h = top.h
inferior_h = inferior.h $(breakpoint_h)
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
c-lang.h ch-lang.h f-lang.h \
jv-lang.h \
- m2-lang.h \
+ m2-lang.h p-lang.h \
complaints.h valprint.h \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
$(POSSLIBS)
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
-COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
+COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o regcache.o \
source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
- symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
- expprint.o environ.o \
+ symtab.o symfile.o symmisc.o linespec.o infcmd.o infrun.o command.o \
+ expprint.o environ.o stack.o thread.o \
event-loop.o event-top.o inf-loop.o \
gdbarch.o arch-utils.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
ui-out.o cli-out.o \
varobj.o wrapper.o \
jv-lang.o jv-valprint.o jv-typeprint.o \
- m2-lang.o \
+ m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c \
jv-exp.tab.c \
- f-exp.tab.c m2-exp.tab.c
+ f-exp.tab.c m2-exp.tab.c p-exp.tab.c
YYOBJ = c-exp.tab.o \
jv-exp.tab.o \
- f-exp.tab.o m2-exp.tab.o
+ f-exp.tab.o m2-exp.tab.o p-exp.tab.o
# Things which need to be built when making a distribution.
#unload $(srcdir)/c-exp.y
#unload $(srcdir)/jv-exp.y
#unload $(srcdir)/m2-exp.y
+ #unload $(srcdir)/p-exp.y
#unload vx-share/*.h
#unload nindy-share/[A-Z]*
#load c-exp.tab.c
#load jv-exp.tab.c
#load m2-exp.tab.c
+ #load p-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
@echo "it deletes files that may require special tools to rebuild."
rm -f c-exp.tab.c \
jv-exp.tab \
- f-exp.tab.c m2-exp.tab.c
+ f-exp.tab.c m2-exp.tab.c p-exp.tab.c
rm -f TAGS $(INFOFILES)
rm -f $(YYFILES)
rm -f nm.h tm.h xm.h config.status
-rm m2-exp.tmp
mv m2-exp.new ./m2-exp.tab.c
+# p-exp.tab.c is generated in objdir from p-exp.y if it doesn't exist
+# in srcdir, then compiled in objdir to p-exp.tab.o.
+# Remove bogus decls for malloc/realloc/free which conflict with everything
+# else.
+p-exp.tab.o: p-exp.tab.c
+p-exp.tab.c: p-exp.y
+ $(SHELL) $(YLWRAP) "$(YACC)" $(srcdir)/p-exp.y y.tab.c p-exp.tmp -- $(YFLAGS)
+ -sed -e '/extern.*malloc/d' \
+ -e '/extern.*realloc/d' \
+ -e '/extern.*free/d' \
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ -e '/^#line.*y.tab.c/d' \
+ < p-exp.tmp > p-exp.new
+ -rm p-exp.tmp
+ mv p-exp.new ./p-exp.tab.c
+
# These files are updated atomically, so make never has to remove them
.PRECIOUS: m2-exp.tab.c f-exp.tab.c c-exp.tab.c
-.PRECIOUS: jv-exp.tab.c
+.PRECIOUS: jv-exp.tab.c p-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
findvar.o: findvar.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
+regcache.o: regcache.c $(defs_h) $(inferior_h) target.h
+
fork-child.o: fork-child.c gdb_wait.h $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
m3-nat.o: m3-nat.c $(defs_h) $(inferior_h) $(value_h) language.h target.h \
gdb_wait.h $(gdbcmd_h) $(gdbcore_h)
+p-lang.o: p-lang.c p-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h parser-defs.h $(symtab_h) gdb_string.h
+
+p-typeprint.o: p-typeprint.c p-lang.h $(defs_h) $(expression_h) \
+ $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
+ target.h typeprint.h $(value_h) gdb_string.h
+
+p-valprint.o: p-valprint.c p-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h $(symtab_h) valprint.h $(value_h) gdb_string.h
+
m68k-tdep.o: m68k-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(value_h) \
$(gdbcore_h) gdb_string.h
$(inferior_h) target.h
ppc-linux-tdep.o: ppc-linux-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
- target.h
+ target.h ppc-tdep.h
ppcbug-rom.o: ppcbug-rom.c monitor.h $(bfd_h) gdb_wait.h $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
$(inferior_h) target.h serial.h terminal.h
rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h \
- xcoffsolib.h
+ $(gdbcore_h) xcoffsolib.h symfile.h objfiles.h gdb-stabs.h
rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
- target.h xcoffsolib.h
+ target.h ppc-tdep.h
scm-exp.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
scm-lang.h scm-tags.h
$(inferior_h) target.h serial.h terminal.h
solib.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
- objfiles.h gnu-regex.h symfile.h target.h gdb_string.h
+ objfiles.h gnu-regex.h symfile.h target.h gdb_string.h solist.h
+
+solib-svr4.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+ objfiles.h gnu-regex.h symfile.h target.h gdb_string.h solist.h \
+ solib-svr4.h
source.o: source.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) language.h objfiles.h gnu-regex.h symfile.h $(symtab_h) \
gnu-regex.h symfile.h $(symtab_h) target.h $(value_h) \
gdb_string.h
+linespec.o: linespec.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) objfiles.h \
+ symfile.h $(symtab_h) $(INCLUDE_DIR)/demangle.h inferior.h
+
# OBSOLETE tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
# OBSOLETE $(symtab_h)
complaints.h $(defs_h) $(gdbtypes_h) objfiles.h stabsread.h symfile.h \
$(symtab_h) partial-stab.h gdb_string.h
-xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h
+xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h $(inferior_h) \
+ $(gdbcmd_h) symfile.h $(frame_h) gnu-regex.h
# FIXME: z8k-tdep.c calls _initialize_gdbtypes(). Since that isn't
# declared -Wimplicit fails. It should be using the GDBARCH framework.
language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+p-exp.tab.o: p-exp.tab.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h p-lang.h parser-defs.h $(symtab_h) $(value_h) \
+ $(bfd_h) objfiles.h symfile.h
+
gdb-events.o: gdb-events.c gdb-events.h $(defs_h) $(gdbcmd_h)
ui-out.o: ui-out.c $(defs_h) $(ui_out_h) expression.h language.h