# is where it should be according to Posix).
# If you use bison instead of yacc, it needs to include the "-y" argument.
-#BISON="bison -y"
+#BISON=bison -y
BISON=yacc
YACC=$(BISON)
#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
-# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
-# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
-BFD_DIR = ${srcdir}/../bfd
-BFD_DEP = $$(BFD_DIR)
-BFD_LIB = ./../bfd${subdir}/libbfd.a
+# Where are the source and binary directories for the BFD library?
+BFD_SRC_DIR = ${srcdir}/../bfd
+BFD_OBJ_DIR = ./../bfd${subdir}
+BFD_DEP = $$(BFD_SRC_DIR)
+BFD_LIB = $(BFD_OBJ_DIR)/libbfd.a
# Where is the source dir for the READLINE library? Traditionally in .. or .
# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
OPCODES = ./../opcodes${subdir}/libopcodes.a
# The config/mh-* file must define REGEX and REGEX1 on USG machines.
-# If your sysyem is missing alloca(), or, more likely, it's there but
+# If your system is missing alloca(), or, more likely, it's there but
# it doesn't work, define ALLOCA & ALLOCA1 too.
# Libraries and corresponding dependencies for compiling gdb.
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes after readline, since readline depends on it.
-CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
- ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
+# If you have the Cygnus libraries installed,
+# you can use 'CLIBS=${INSTALLED_LIBS}' 'CDEPS='
+INSTALLED_LIBS=-lbfd -lreadline ${TERMCAP} -lopcodes -lmmalloc \
+ -liberty ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
+CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} \
+ ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
- ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
+ ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
-ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
-ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
+ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} \
+ ${NAT_ADD_FILES}
+ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
+ ${NAT_ADD_FILES}
-VERSION = 4.8.3
+VERSION = 4.9.1
DIST=gdb
LINT=/usr/5bin/lint
-LINTFLAGS= -I${BFD_DIR}
+LINTFLAGS= -I${BFD_SRC_DIR} -I${BFD_OBJ_DIR}
RUNTEST=runtest
RUNTESTFLAGS=
+# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
+# interface to the serial port. Hopefully if get ported to OS/2, VMS,
+# etc., then there will be (as part of the C library or perhaps as
+# part of libiberty) a POSIX interface. But at least for now the
+# host-dependent makefile fragment might need to use something else
+# besides ser-unix.o
+SER_HARDWIRE=ser-unix.o
+
# Host and target-dependent makefile fragments come in here.
####
# End of host and target-dependent makefile fragments
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"BISON=$(BISON)"
-# All source files that go into linking GDB, except config-specified files.
+# All source files that go into linking GDB.
# Source files which are included via a config/*/* Makefile fragment should
# *not* be specified here; they're in "ALLDEPFILES".
-SFILES = blockframe.c breakpoint.c buildsym.c c-exp.y c-lang.c c-typeprint.c \
- c-valprint.c ch-exp.y ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
- command.c complaints.c core.c cp-valprint.c dbxread.c demangle.c \
- dwarfread.c elfread.c environ.c eval.c expprint.c findvar.c gdbtypes.c \
- infcmd.c inflow.c infrun.c language.c m2-exp.y m2-lang.c m2-typeprint.c \
- m2-valprint.c main.c maint.c mem-break.c minsyms.c mipsread.c \
- objfiles.c parse.c printcmd.c remote.c source.c stabsread.c stack.c \
- symfile.c symmisc.c symtab.c target.c typeprint.c utils.c valarith.c \
- valops.c valprint.c values.c serial.c ser-hardwire.c
+# Neither should links made at configuration time be specified here, since
+# SFILES is used in building the distribution archive.
+
+SFILES = ${srcdir}/blockframe.c ${srcdir}/breakpoint.c ${srcdir}/buildsym.c \
+ ${srcdir}/c-exp.y ${srcdir}/c-lang.c ${srcdir}/c-typeprint.c \
+ ${srcdir}/c-valprint.c ${srcdir}/ch-exp.y ${srcdir}/ch-lang.c \
+ ${srcdir}/ch-typeprint.c ${srcdir}/ch-valprint.c ${srcdir}/coffread.c \
+ ${srcdir}/command.c ${srcdir}/complaints.c ${srcdir}/core.c \
+ ${srcdir}/cp-valprint.c ${srcdir}/dbxread.c ${srcdir}/demangle.c \
+ ${srcdir}/dwarfread.c ${srcdir}/elfread.c ${srcdir}/environ.c \
+ ${srcdir}/eval.c ${srcdir}/expprint.c ${srcdir}/findvar.c \
+ ${srcdir}/gdbtypes.c \
+ ${srcdir}/infcmd.c ${srcdir}/inflow.c ${srcdir}/infrun.c \
+ ${srcdir}/language.c ${srcdir}/putenv.c ${srcdir}/m2-exp.y \
+ ${srcdir}/m2-lang.c ${srcdir}/m2-typeprint.c \
+ ${srcdir}/m2-valprint.c ${srcdir}/main.c ${srcdir}/maint.c \
+ ${srcdir}/mem-break.c ${srcdir}/minsyms.c ${srcdir}/mipsread.c \
+ ${srcdir}/objfiles.c ${srcdir}/parse.c ${srcdir}/printcmd.c \
+ ${srcdir}/remote.c ${srcdir}/source.c ${srcdir}/stabsread.c \
+ ${srcdir}/stack.c \
+ ${srcdir}/symfile.c ${srcdir}/symmisc.c ${srcdir}/symtab.c \
+ ${srcdir}/target.c ${srcdir}/typeprint.c ${srcdir}/utils.c \
+ ${srcdir}/valarith.c \
+ ${srcdir}/valops.c ${srcdir}/valprint.c ${srcdir}/values.c \
+ ${srcdir}/serial.c ${srcdir}/ser-unix.c
# Files that are not source code, but need to go into gdb-$(VERSION).tar.Z.
-NONSRC = Makefile.in depend alldeps.mak createtags munch configure.in \
- ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps README TODO \
- TAGS NEWS Projects .gdbinit COPYING $(YYFILES) copying.c copying.awk \
- saber.suppress standalone.c stuff.c kdb-start.c putenv.c gcc.patch \
+NONSRC = ${srcdir}/Makefile.in ${srcdir}/depend ${srcdir}/alldeps.mak \
+ ${srcdir}/munch ${srcdir}/configure.in \
+ ${srcdir}/ChangeLog ${srcdir}/ChangeLog-9091 ${srcdir}/ChangeLog-92 \
+ ${srcdir}/ChangeLog-3.x \
+ ${srcdir}/gdb.1 ${srcdir}/refcard.ps ${srcdir}/README ${srcdir}/TODO \
+ TAGS ${srcdir}/NEWS ${srcdir}/Projects ${srcdir}/.gdbinit \
+ ${srcdir}/COPYING $(YYFILES) ${srcdir}/copying.c \
+ ${srcdir}/copying.awk \
+ ${srcdir}/saber.suppress ${srcdir}/standalone.c ${srcdir}/stuff.c \
+ ${srcdir}/kdb-start.c ${srcdir}/gcc.patch \
${srcdir}/nindy-share/Makefile ${srcdir}/nindy-share/VERSION \
${srcdir}/nindy-share/README ${srcdir}/vx-share/README \
+ ${srcdir}/29k-share/README \
${srcdir}/config/convex/Convex.notes
# All source files that lint should look at
SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
# Header files that are not named in config/*/* Makefile fragments go here.
-HFILES = breakpoint.h buildsym.h call-cmds.h command.h defs.h environ.h \
- expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h gdb-stabs.h \
- inferior.h language.h minimon.h objfiles.h parser-defs.h \
- partial-stab.h serial.h signals.h solib.h symfile.h symtab.h \
- stabsread.h target.h terminal.h typeprint.h xcoffsolib.h value.h \
- c-lang.h ch-lang.h m2-lang.h complaints.h ns32k-opcode.h valprint.h \
- config/m68k/tm-m68k.h config/pa/tm-hppa.h \
- config/i960/tm-i960.h config/sparc/tm-sparc.h config/tm-sunos.h \
- config/tm-sysv4.h config/m68k/xm-m68k.h config/sparc/xm-sparc.h \
- config/xm-sysv4.h config/vax/xm-vax.h config/nm-trash.h \
- ${srcdir}/29k-share/udi/udiphcfg.h ${srcdir}/29k-share/udi/udiphsun.h \
+HFILES = ${srcdir}/breakpoint.h ${srcdir}/buildsym.h ${srcdir}/call-cmds.h \
+ ${srcdir}/command.h ${srcdir}/defs.h ${srcdir}/environ.h \
+ ${srcdir}/expression.h ${srcdir}/frame.h ${srcdir}/gdbcmd.h \
+ ${srcdir}/gdbcore.h ${srcdir}/gdbtypes.h ${srcdir}/gdb-stabs.h \
+ ${srcdir}/inferior.h ${srcdir}/language.h ${srcdir}/minimon.h \
+ ${srcdir}/objfiles.h ${srcdir}/parser-defs.h \
+ ${srcdir}/partial-stab.h ${srcdir}/serial.h ${srcdir}/signals.h \
+ ${srcdir}/solib.h ${srcdir}/symfile.h ${srcdir}/symtab.h \
+ ${srcdir}/stabsread.h ${srcdir}/target.h ${srcdir}/terminal.h \
+ ${srcdir}/typeprint.h ${srcdir}/xcoffsolib.h ${srcdir}/value.h \
+ ${srcdir}/c-lang.h ${srcdir}/ch-lang.h ${srcdir}/m2-lang.h \
+ ${srcdir}/complaints.h ${srcdir}/ns32k-opcode.h ${srcdir}/valprint.h \
+ ${srcdir}/config/m68k/tm-m68k.h ${srcdir}/config/pa/tm-hppa.h \
+ ${srcdir}/config/i960/tm-i960.h ${srcdir}/config/sparc/tm-sparc.h \
+ ${srcdir}/config/tm-sunos.h \
+ ${srcdir}/config/tm-sysv4.h ${srcdir}/config/m68k/xm-m68k.h \
+ ${srcdir}/config/sparc/xm-sparc.h \
+ ${srcdir}/config/xm-sysv4.h ${srcdir}/config/vax/xm-vax.h \
+ ${srcdir}/config/nm-trash.h ${srcdir}/29k-share/udi/udiids.h \
+ ${srcdir}/29k-share/udi/udiphcfg.h ${srcdir}/29k-share/udi/udiphunix.h \
${srcdir}/29k-share/udi/udiproc.h ${srcdir}/29k-share/udi/udipt29k.h \
${srcdir}/29k-share/udi/udiptcfg.h ${srcdir}/29k-share/udi/udisoc.h \
${srcdir}/29k-share/udi_soc ${srcdir}/nindy-share/b.out.h \
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
-POSSLIBS = regex.c regex.h alloca.c
+POSSLIBS = ${srcdir}/regex.c ${srcdir}/regex.h ${srcdir}/alloca.c
TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
# gdb-xxx.tar.Z:
TARDIRS = doc sparclite # tests
-DEPFILES = ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
+# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
+# default their values the way we do for SER_HARDWIRE; in the future
+# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
+# variables analogous to SER_HARDWIRE which get defaulted in this
+# Makefile.in
+
+DEPFILES = ${TDEPFILES} ${XDEPFILES} ${SER_HARDWIRE} ${NATDEPFILES}
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o \
- serial.o ser-hardwire.o
+ serial.o
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
${CC} -c ${INTERNAL_CFLAGS} $<
all: gdb
- $(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
+ @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
installcheck:
check: force
- rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do
+ @rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do
info dvi: force
- $(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
+ @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
install-info: force
- $(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
+ @$(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
clean-info: force
- $(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do
+ @$(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do
gdb.z:gdb.1
nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
$(INSTALL_PROGRAM) gdb $(bindir)/$$n; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1
$(M_INSTALL)
- $(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
+ @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
init.c: $(srcdir)/munch $(OBS) $(TSOBS)
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
- #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
+ #setopt load_flags $(CFLAGS) -I$(BFD_SRC_DIR) -I${BFD_OBJ_DIR} -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
#unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
#unload ${srcdir}/vx-share/*.h
# "make" variable definitions for all ALLDEPFILES, ALLPARAM, and ALLCONFIG,
# all cadged from the current contents of the config subtree.
+# using sort and uniq is not a violation of the GNU coding standards
+# because this rule is not part of building and installing GDB.
alldeps.mak: force
rm -f alldeps.mak alldeps*.tmp allparam*.tmp allconfig*.tmp
- for i in `find ${srcdir}/config -name '*.m[ht]'` ; do \
+ for i in `(cd ${srcdir}; find config -name '*.m[ht]' -print)` ; do \
echo $$i >>allconfig.tmp; \
- awk <$$i ' \
+ awk <${srcdir}/$$i ' \
$$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
- || $$1 == "NATDEPFILES=" { \
+ || $$1 == "NATDEPFILES=" || $$1 == "SER_HARDWIRE=" { \
for (i = 2; i <= NF; i++) \
print $$i >> "alldeps.tmp" ; \
} \
-e 's/\.o/.c/' \
>alldeps2.tmp
for i in `cat allparam.tmp` ; do \
- find ${srcdir}/config -name $$i -print >>allparam2.tmp ; \
+ (cd ${srcdir} ; \
+ find config -name $$i -print ) >>allparam2.tmp ; \
done
echo '# Start of "alldeps.mak" definitions' >>alldeps.mak;
sort <alldeps2.tmp | uniq | awk 'BEGIN {printf "ALLDEPFILES="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
+ NR == 0 {printf "$${srcdir}/" $$0;} \
+ NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
sort <allparam2.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
+ NR == 0 {printf "$${srcdir}/" $$0;} \
+ NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
+ NR == 0 {printf "$${srcdir}/" $$0;} \
+ NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
echo '# End of "alldeps.mak" definitions' >>alldeps.mak;
rm -f alldeps*.tmp allparam*.tmp allconfig*.tmp
-# The sed script makes everything which depends on {x,t}m.h depend on
-# config.status as well, in case someone reconfigures gdb out from
-# under an already compiled gdb.
depend: $(SOURCES) Makefile.in
@echo Ignore errors about non-existent system-supplied include files
@echo for systems other than the one you are using.
@echo Also ignore any errors in arm-convert.s.
- -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \
- -I${READLINE_DIR} $(INCLUDE_CFLAGS) \
+ -$(GCC) -MM -nostdinc -I/usr/include -I${BFD_SRC_DIR} \
+ -I${BFD_OBJ_DIR} -I${READLINE_DIR} $(INTERNAL_CFLAGS) \
`ls $(SOURCES) | grep -v '\.[hy]$$' | \
sort -u` >depend.tmp
+#BEGIN COMMENTED OUT CODE -- this should now be taken care of below.
# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
# for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
# by the various subdirectories.
- if [ "${srcdir}" = "." ] ; then \
- <depend.tmp sed \
- -e 's; ./xm.h; xm.h;g' \
- -e 's; ./tm.h; tm.h;g' \
- -e 's; ./nm.h; nm.h;g' \
- -e 's; \./; $${srcdir}/;g' \
- -e 's; vx-share/; $${srcdir}/vx-share/;g' \
- -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
- -e 's; 29k-share/; $${srcdir}/29k-share/;g' \
- >depend.tm2; \
- rm depend.tmp; \
- mv depend.tm2 depend.tmp; \
- fi
+# if [ "${srcdir}" = "." ] ; then \
+# <depend.tmp sed \
+# -e 's; ./xm.h; xm.h;g' \
+# -e 's; ./tm.h; tm.h;g' \
+# -e 's; ./nm.h; nm.h;g' \
+# -e 's; \./; $${srcdir}/;g' \
+# -e 's; vx-share/; $${srcdir}/vx-share/;g' \
+# -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+# -e 's; 29k-share/; $${srcdir}/29k-share/;g' \
+# >depend.tm2; \
+# rm depend.tmp; \
+# mv depend.tm2 depend.tmp; \
+# fi
+#END COMMENTED OUT CODE
+# Make everything which depends on {x,t,n}m.h depend on config.status as
+# well, in case someone reconfigures gdb out from under an already
+# compiled gdb.
+#
+# Translate SRCDIR/foo.c to $srcdir/foo.c. This allows this "depend" file
+# to be used by any dir, or included in a distribution. It's possible
+# we should write the generated copy into SRCDIR like "make headers" does
+# in bfd. We do not try to quote the regexp, so if SRCDIR/ is "./" it will
+# also match any single character followed by "/". This is OK.
<depend.tmp sed \
- -e 's; [xt]m.h;& config.status;g' \
-e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
-e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
-e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
- -e 's; ./xm.h; xm.h config.status;g' \
- -e 's; ./tm.h; tm.h config.status;g' \
- -e 's; ./nm.h; nm.h config.status;g' \
- >depend
- rm depend.tmp
+ -e 's; $(BFD_DEP)/bfd\.h; ../bfd/bfd.h;g' \
+ -e 's; $(INCLUDE_DEP)/../bfd/bfd\.h; ../bfd/bfd.h;g' \
+ -e 's; \./xm.h; xm.h config.status;g' \
+ -e 's; \./tm.h; tm.h config.status;g' \
+ -e 's; \./nm.h; nm.h config.status;g' \
+ -e 's; ${srcdir}/; $${srcdir}/;g' \
+ -e 's; vx-share/; $${srcdir}/vx-share/;g' \
+ -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+ -e 's; 29k-share/; $${srcdir}/29k-share/;g' \
+ >depend.tm3;
+# OK, get your sed manual out. This script makes the rules in
+# depend explicitly state the rule, rather than relying on VPATH
+# or a .c.o implicit rule. This is needed for Sun make, and should
+# be portable to any make worthy of the name.
+# There is one exception: the *.tab.c files can exist either in srcdir
+# or in ., so make sure not to use an explicit rule for them.
+#
+# Adding -I${BFD_SRC_DIR} and -I${BFD_OBJ_DIR} is required for all the files
+# which use BFD internals. This is because some bfd include files are in the
+# source directory, and some (bfd.h for example) are generated in the bfd
+# build directory.
+# Adding -I${READLINE_DIR} is required because the readline header files
+# are in readline not in include. They probably should be moved.
+ <depend.tm3 sed \
+ -e '/:/h' \
+ -e '/\\$$/b end' \
+ -e 'p' \
+ -e 'g' \
+ -e '/:.*\.tab\.c/d' \
+ -e 's/.*:\(.*\.c\).*/ $${CC} -c $${INTERNAL_CFLAGS} \1/' \
+ -e 's;$${srcdir}/xcoffread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/stabsread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/dwarfread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/elfread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/mipsread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/coffread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/dbxread.c;-I$${BFD_SRC_DIR} -I$${BFD_OBJ_DIR} &;' \
+ -e 's;$${srcdir}/main.c;-I$${READLINE_DIR} &;' \
+ -e ': end' \
+ >depend.tm4;
+ mv depend.tm4 depend
+# rm depend.tm?
config.status:
@echo "You must configure gdb. Look at the README file for details."
ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-lc $(CLIBS)
-# Put the proper machine-specific files first.
-# createtags will edit the .o in DEPFILES into .c
+# Put the proper machine-specific files first, so M-. on a machine
+# specific routine gets the one for the correct machine.
+# The xyzzy stuff below deals with empty DEPFILES
TAGS: ${TAGFILES}
- $(srcdir)/createtags $(TM_FILE) ${XM_FILE} ${NAT_FILE} \
- $(DEPFILES) ${TAGFILES}
+ etags `find ${srcdir}/config -name $(TM_FILE) -print` \
+ `find ${srcdir}/config -name ${XM_FILE} -print` \
+ `find ${srcdir}/config -name ${NAT_FILE} -print` \
+ `for i in yzzy ${DEPFILES}; do \
+ if [ x$$i != xyzzy ]; then \
+ echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \
+ fi; \
+ done` \
+ ${TAGFILES}
tags: TAGS
# Making distributions of GDB and friends.
# of files to be checked for dependencies.
update-depend: update-alldeps force_update
../configure none -norecursion
+ (cd ../bfd; ../configure sun4 -norecursion; rm -f stmp-bfd.h)
+ (cd ../bfd; $(MAKE) $(MFLAGS) bfd.h)
rm -f depend
$(MAKE) $(MFLAGS) depend
done
chmod og=u `find . -print`
+# Build a proto-testsuite.dir.
+make-proto-testsuite.dir: force_update
+ rm -rf proto-testsuite.dir
+ mkdir proto-testsuite.dir
+ rootme=`pwd`/ ; export rootme ; \
+ for i in `find testsuite -type f -print`; do \
+ (cd proto-testsuite.dir ; \
+ dir=`dirname $$i`; \
+ if test -d $$dir; then true; else mkdir -p $$dir; fi; \
+ ln -s $${rootme}/$$i $$i;); \
+ done
+ find proto-testsuite.dir -name Makefile -exec rm {} \;
+ find proto-testsuite.dir -name config.status -exec rm {} \;
+
clean:
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f *.o ${ADD_FILES} *~
rm -f gdb core make.log
rm -f gdb[0-9]
-distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
+# This used to depend on c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
+# I believe this is wrong; the makefile standards for distclean just
+# describe removing files; the only sort of "re-create a distribution"
+# functionality described is if the distributed files are unmodified.
+distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f tm.h xm.h config.status
+ rm -f nm.h tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f ${TESTS} Makefile depend
realclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
- rm -f tm.h xm.h config.status
- rm -f Makefile depend
+ rm -f nm.h tm.h xm.h config.status
+ rm -f y.output yacc.acts yacc.tmp
+ rm -f ${TESTS} Makefile depend
STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
subdir_do: force
@for i in $(DODIRS); do \
- if [ -d ./$$i ] ; then \
+ if [ -f ./$$i/Makefile ] ; then \
if (cd ./$$i; \
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
else exit 1 ; fi ; \
version.c: Makefile
echo 'char *version = "$(VERSION)";' >version.c
+ echo 'char *host_canonical = "$(host_canonical)";' >> version.c
+ echo 'char *target_canonical = "$(target_canonical)";' >> version.c
# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to c-exp.tab.o.
c-exp.tab.o: c-exp.tab.c
c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in
@echo 'Expect 4 shift/reduce conflicts.'
- ${YACC} $(srcdir)/c-exp.y
+ ${YACC} ${YFLAGS} $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
- < y.tab.c > ././c-exp.tab.c
+ < y.tab.c > c-exp.new
-rm y.tab.c
+ mv c-exp.new ././c-exp.tab.c
# ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to ch-exp.tab.o.
# else.
ch-exp.tab.o: ch-exp.tab.c
ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in
- @echo 'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
- ${YACC} $(srcdir)/ch-exp.y
+ ${YACC} ${YFLAGS} $(srcdir)/ch-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
- < y.tab.c > ././ch-exp.tab.c
+ < y.tab.c > ch-exp.new
-rm y.tab.c
+ mv ch-exp.new ././ch-exp.tab.c
# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to m2-exp.tab.o.
# else.
m2-exp.tab.o: m2-exp.tab.c
m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in
- ${YACC} $(srcdir)/m2-exp.y
+ ${YACC} ${YFLAGS} $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
- < y.tab.c > ././m2-exp.tab.c
+ < y.tab.c > m2-exp.new
-rm y.tab.c
+ mv m2-exp.new ././m2-exp.tab.c
-
-main.o: ${srcdir}/main.c
- ${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $<
-
-# The symbol-file readers have dependencies on BFD header files.
-dbxread.o: ${srcdir}/dbxread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
-
-coffread.o: ${srcdir}/coffread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
-
-mipsread.o: ${srcdir}/mipsread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
-
-elfread.o: ${srcdir}/elfread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
-
-dwarfread.o: ${srcdir}/dwarfread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c
-
-stabsread.o: ${srcdir}/stabsread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c
-
-# Used on RS/6000 native
-xcoffread.o: ${srcdir}/xcoffread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
-
-xcoffexec.o: ${srcdir}/xcoffexec.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
-
-# Used on HP-PA native
-paread.o: ${srcdir}/paread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c
-
-# Drag in the files that are in another directory.
-
-xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c
-
-xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
-
-xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
-
-nindy.o: ${srcdir}/nindy-share/nindy.c
- ${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \
- ${srcdir}/nindy-share/nindy.c
-
-Onindy.o: ${srcdir}/nindy-share/Onindy.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c
-
-ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c
-
-ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
-
-udr.o: ${srcdir}/29k-share/udi/udr.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c
-
-udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c
+# These files are updated atomically, so make never has to remove them
+.PRECIOUS: m2-exp.tab.c ch-exp.tab.c c-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
# This is the end of "Makefile.in". When built into "Makefile"
# by the configure script, two things are added below this point:
-# alldeps.mak -- defintions of all files that are used in
+# alldeps.mak -- definitions of all files that are used in
# host- or target-dependent configurations
# depend -- what .o files depend on what .c and .h files,
# for all configurations.