# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline $(TERMCAP) -lopcodes -lmmalloc \
-liberty $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS)
-CLIBS = $(BFD) $(READLINE) $(TERMCAP) $(OPCODES) $(MMALLOC) \
- $(LIBIBERTY) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS)
+CLIBS = $(BFD) $(READLINE) $(OPCODES) $(MMALLOC) \
+ $(LIBIBERTY) $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) \
$(BFD) $(READLINE) $(OPCODES) $(MMALLOC) $(LIBIBERTY)
# besides ser-unix.o
SER_HARDWIRE=ser-unix.o
+# The `remote' debugging target is supported for most architectures,
+# but not all (e.g. 960)
+REMOTE_O=remote.o
+
# Host and target-dependent makefile fragments come in here.
####
# End of host and target-dependent makefile fragments
dbxread.c demangle.c dwarfread.c elfread.c environ.c eval.c expprint.c \
findvar.c gdbtypes.c infcmd.c inflow.c infrun.c language.c putenv.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
- mem-break.c minsyms.c mipsread.c objfiles.c parse.c printcmd.c \
- remote.c source.c stabsread.c stack.c symfile.c symmisc.c symtab.c \
- target.c typeprint.c utils.c valarith.c valops.c valprint.c values.c \
- serial.c ser-unix.c
+ mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
+ printcmd.c remote.c source.c stabsread.c stack.c symfile.c symmisc.c \
+ symtab.c target.c typeprint.c utils.c valarith.c valops.c valprint.c \
+ values.c serial.c ser-unix.c
# Files that are not source code, but need to go into
# gdb-$(VERSION).tar.Z.
Projects .gdbinit COPYING $(YYFILES) copying.c copying.awk \
saber.suppress standalone.c stuff.c kdb-start.c gcc.patch \
nindy-share/Makefile nindy-share/VERSION nindy-share/README \
- vx-share/README 29k-share/udi/README config/convex/Convex.notes
+ vx-share/README 29k-share/README config/convex/Convex.notes
# All source files that lint should look at
LINTFILES = $(SFILES) $(YYFILES) init.c
config/m68k/xm-m68k.h config/sparc/xm-sparc.h config/xm-sysv4.h \
config/vax/xm-vax.h config/nm-trash.h $(udiheaders) \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
- nindy-share/block_io.h nindy-share/coff.h nindy-share/demux.h \
- nindy-share/env.h nindy-share/stop.h nindy-share/ttycntl.h \
+ nindy-share/block_io.h nindy-share/coff.h \
+ nindy-share/env.h nindy-share/stop.h \
vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
- vx-share/xdr_ptrace.h vx-share/xdr_rdb.h
+ vx-share/xdr_ptrace.h vx-share/xdr_rdb.h thread.h
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
-DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES)
+DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) $(REMOTE_O)
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
$(ALLPARAM) $(INFOFILES) $(POSSLIBS) $(REMOTE_EXAMPLES)
-OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o \
+OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
- symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o command.o \
+ symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
utils.o expprint.o environ.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o putenv.o parse.o language.o $(YYOBJ) buildsym.o \
objfiles.o minsyms.o maint.o demangle.o dbxread.o coffread.o elfread.o \
dwarfread.o mipsread.o stabsread.o core.o c-lang.o ch-lang.o m2-lang.o \
complaints.o typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
- c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o serial.o
+ c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o nlmread.o \
+ serial.o
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
cd $$i; \
ln -s $${rootme}/$$i/* .; \
rm -rf SCCS CVS CVS.adm RCS config.status; \
- if test -f Makefile.in; then rm Makefile; else true; fi;); \
+ if test -f Makefile.in; then rm -f Makefile; else true; fi;); \
done ; \
for i in `echo $(TARFILES)`; do \
(cd proto-gdb.dir ; \
ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
a29k-pinsn.c a29k-tdep.c a68v-nat.c altos-xdep.c arm-convert.s \
arm-pinsn.c arm-tdep.c arm-xdep.c convex-pinsn.c convex-tdep.c \
- convex-xdep.c core-svr4.c coredep.c corelow.c exec.c fork-child.c \
+ convex-xdep.c core-svr4.c coredep.c corelow.c delta68-nat.c exec.c \
+ fork-child.c \
go32-xdep.c gould-pinsn.c gould-xdep.c h8300-tdep.c h8500-tdep.c \
hp300ux-nat.c hppa-pinsn.c hppa-tdep.c hppab-nat.c hppah-nat.c \
i386-pinsn.c i386-tdep.c i386b-nat.c i386mach-nat.c i386v-nat.c \
infptrace.c inftarg.c irix4-nat.c isi-xdep.c m68k-pinsn.c m68k-tdep.c \
m88k-nat.c m88k-pinsn.c m88k-tdep.c mips-nat.c mips-pinsn.c \
mips-tdep.c news-xdep.c nindy-share/Onindy.c nindy-share/nindy.c \
- nindy-share/ttybreak.c nindy-share/ttyflush.c nindy-tdep.c \
+ nindy-share/ttyflush.c nindy-tdep.c \
ns32k-pinsn.c paread.c procfs.c pyr-pinsn.c pyr-tdep.c pyr-xdep.c \
remote-adapt.c remote-eb.c remote-es.c remote-hms.c remote-mips.c \
remote-mm.c remote-monitor.c remote-nindy.c remote-sim.c remote-st.c \
remote-udi.c remote-vx.c remote-z8k.c rs6000-nat.c rs6000-pinsn.c \
rs6000-tdep.c ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
sparc-pinsn.c sparc-tdep.c sun3-nat.c sun386-nat.c symm-tdep.c \
- symm-xdep.c tahoe-pinsn.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
+ symm-nat.c tahoe-pinsn.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
vax-pinsn.c vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
xcoffexec.c xcoffread.c xcoffsolib.c z8k-tdep.c
config/i386/i386sol2.mh config/i386/i386sol2.mt config/i386/i386v.mh \
config/i386/i386v.mt config/i386/i386v32.mh config/i386/i386v4.mh \
config/i386/i386v4.mt config/i386/linux.mh config/i386/linux.mt \
- config/i386/ncr3000.mh config/i386/ncr3000.mt config/i386/sun386.mh \
+ config/i386/ncr3000.mh config/i386/ncr3000.mt config/i386/ptx.mh \
+ config/i386/sun386.mh \
config/i386/sun386.mt config/i386/symmetry.mh config/i386/symmetry.mt \
config/i960/nindy960.mt config/i960/vxworks960.mt config/m68k/3b1.mh \
config/m68k/3b1.mt config/m68k/altos.mh config/m68k/altos.mt \
$(gdbtypes_h) language.h objfiles.h partial-stab.h stabsread.h \
symfile.h $(symtab_h) target.h
+delta68-nat.o: delta68-nat.c $(defs_h)
+
demangle.o: demangle.c $(defs_h) $(gdbcmd_h)
dwarfread.o: dwarfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
news-xdep.o: news-xdep.c
Onindy.o: nindy-share/Onindy.c $(wait_h) nindy-share/block_io.h \
- nindy-share/env.h nindy-share/ttycntl.h
+ nindy-share/env.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/Onindy.c
nindy.o: nindy-share/nindy.c $(wait_h) nindy-share/block_io.h \
- nindy-share/env.h nindy-share/ttycntl.h
+ nindy-share/env.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/nindy.c
-ttybreak.o: nindy-share/ttybreak.c nindy-share/ttycntl.h
- $(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/ttybreak.c
+nlmread.o: nlmread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+ gdb-stabs.h objfiles.h symfile.h $(symtab_h)
-ttyflush.o: nindy-share/ttyflush.c nindy-share/ttycntl.h
+ttyflush.o: nindy-share/ttyflush.c
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/ttyflush.c
nindy-tdep.o: nindy-tdep.c $(defs_h) $(frame_h) $(symtab_h)
pyr-tdep.o: pyr-tdep.c $(defs_h)
pyr-xdep.o: pyr-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+regex.o: regex.c regex.h
+
remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h
$(gdbcore_h) monitor.h serial.h target.h
remote-nindy.o: remote-nindy.c $(ieee-float_h) $(wait_h) $(command_h) \
- $(defs_h) $(gdbcore_h) $(inferior_h) nindy-share/demux.h \
- nindy-share/env.h nindy-share/stop.h nindy-share/ttycntl.h \
+ $(defs_h) $(gdbcore_h) $(inferior_h) \
+ nindy-share/env.h nindy-share/stop.h \
symfile.h target.h
remote-sim.o: remote-sim.c $(wait_h) $(defs_h) $(gdbcore_h) \
language.h objfiles.h symfile.h $(symtab_h) target.h
symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
-symm-xdep.o: symm-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+symm-nat.o: symm-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
symmisc.o: symmisc.c $(bfd_h) $(breakpoint_h) $(command_h) $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \
objfiles.h symfile.h target.h
+thread.o: thread.c $(defs_h) thread.h
+
typeprint.o: typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
$(value_h)
projects / deliverable / binutils-gdb.git / blobdiff