-# Copyright 1989, 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995
+# Free Software Foundation, Inc.
# This file is part of GDB.
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-prefix = /usr/local
+prefix = @prefix@
+exec_prefix = @exec_prefix@
-program_transform_name =
-exec_prefix = $(prefix)
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
tooldir = $(libdir)/$(target_alias)
SHELL = /bin/sh
-INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
AR = ar
AR_FLAGS = qv
-RANLIB = ranlib
+RANLIB = @RANLIB@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
# -traditional flag. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
-#CC=gcc -traditional
+CC=@CC@
-# Directory containing source files. Don't clean up the spacing,
-# this exact string is matched for by the "configure" script.
-srcdir = .
+# Directory containing source files.
+srcdir = @srcdir@
+VPATH = @srcdir@
# If you use bison instead of yacc, it needs to include the "-y" argument.
#BISON=bison -y
# routines in libiberty.
INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
-# Where is the "-liberty" library, containing getopt and obstack?
+
+# Where is the "-liberty" library? Typically in ../libiberty.
LIBIBERTY = ../libiberty/libiberty.a
-# Where is the MMALLOC library? Typically ../mmalloc.
+# Where is the MMALLOC library? Typically in ../mmalloc.
# Note that mmalloc can still be used on systems without mmap().
# To use your system malloc, comment out the following defines.
-MMALLOC = ../mmalloc/libmmalloc.a
+MMALLOC_DIR = ../mmalloc
+MMALLOC = $(MMALLOC_DIR)/libmmalloc.a
# To use your system malloc, uncomment MMALLOC_DISABLE.
#MMALLOC_DISABLE = -DNO_MMALLOC
# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
-MMALLOC_CFLAGS = $(MMALLOC_CHECK) $(MMALLOC_DISABLE)
+MMALLOC_CFLAGS = -I$(srcdir)/$(MMALLOC_DIR) $(MMALLOC_CHECK) $(MMALLOC_DISABLE)
-# Where are the BFD library?
+# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
BFD_SRC = $(srcdir)/$(BFD_DIR)
# in INCLUDE_DIR.
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
-OPCODES = ./../opcodes/libopcodes.a
+OPCODES = ../opcodes/libopcodes.a
# Where are the other opcode tables which only have header file
# versions?
OP_INCLUDE = $(INCLUDE_DIR)/opcode
OPCODES_CFLAGS = -I$(OP_INCLUDE)
+#start-sanitize-gdbtk
+# Where is the TCL library? Typically in ../tcl.
+TCL = @TCLLIB@
+TCL_CFLAGS = @TCLHDIR@
+
+# Where is the TK library? Typically in ../tk.
+TK = @TKLIB@
+TK_CFLAGS = @TKHDIR@
+
+X11 = @X_LIBS@ @X_PRE_LIBS@ -lX11 @X_EXTRA_LIBS@
+X11_CFLAGS = @X_CFLAGS@
+
+ENABLE_GDBTK= @ENABLE_GDBTK@
+#end-sanitize-gdbtk
+
+ENABLE_CFLAGS= @ENABLE_CFLAGS@
+ENABLE_CLIBS= @ENABLE_CLIBS@
+ENABLE_OBS= @ENABLE_OBS@
+
+
# All the includes used for CFLAGS and for lint.
# -I. for config files.
# -I$(srcdir) for gdb internal headers and possibly for regex.h also.
# It is also possible that you will need to add -I/usr/include/sys if
# your system doesn't have fcntl.h in /usr/include (which is where it
# should be according to Posix).
-GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config
+DEFS = @DEFS@
+GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config $(DEFS)
# M{H,T}_CFLAGS, if defined, have host- and target-dependent CFLAGS
# from the config directory.
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline $(TERMCAP) -lopcodes -lmmalloc \
-liberty $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(ENABLE_CLIBS)
-CLIBS = $(BFD) $(READLINE) $(OPCODES) $(MMALLOC) \
- $(LIBIBERTY) $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) \
- $(ENABLE_CLIBS)
-CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) \
- $(BFD) $(READLINE) $(OPCODES) $(MMALLOC) $(LIBIBERTY)
+CLIBS = $(BFD) $(READLINE) $(OPCODES) $(MMALLOC) $(LIBIBERTY) \
+ $(ENABLE_CLIBS) $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) \
+ $(LIBIBERTY)
+CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(BFD) $(READLINE) $(OPCODES) \
+ $(MMALLOC) $(LIBIBERTY)
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION = 4.13.1
+VERSION = 4.14.1
DIST=gdb
LINT=/usr/5bin/lint
LINTFLAGS= $(BFD_CFLAGS)
-RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
- echo $${srcdir}/../dejagnu/runtest ; else echo runtest; \
+RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \
+ echo ${srcdir}/../dejagnu/runtest ; else echo runtest; \
fi`
RUNTESTFLAGS=
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
-REMOTE_O = remote.o dcache.o remote-utils.o
+REMOTE_OBS = remote.o dcache.o remote-utils.o
+
+ANNOTATE_OBS = annotate.o
# Host and target-dependent makefile fragments come in here.
-####
+@host_makefile_frag@
+@target_makefile_frag@
# End of host and target-dependent makefile fragments
FLAGS_TO_PASS = \
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../newlib/Makefile ] ; then \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L$${rootme}/../../newlib -B$${rootme}/../../newlib/; \
+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L$${rootme}/../newlib -B$${rootme}/../newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
if [ -f $${rootme}/../newlib/Makefile ] ; then \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L$${rootme}/../../newlib -B$${rootme}/../../newlib/; \
+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/newlib/targ-include -idirafter $${rootsrc}/../newlib/libc/include -nostdinc -L$${rootme}/../newlib -B$${rootme}/../newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
CHILL = gcc
CHILL_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
- echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../gcc/ch/runtime/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
-CHILL_LIB = -lchill
-
-NLMCONV_FOR_TARGET = ` \
- if [ -f $${rootme}/../binutils/nlmconv ] ; then \
- echo $${rootme}/../binutils/nlmconv; \
+CHILL_LIB = ` \
+ if [ -f $${rootme}/../gcc/ch/runtime/libchill.a ] ; then \
+ echo $${rootme}/../gcc/ch/runtime/chillrt0.o \
+ $${rootme}/../gcc/ch/runtime/libchill.a; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(NLMCONV); \
- else \
- t='$(program_transform_name)'; echo nlmconv | sed -e '' $$t; \
- fi; \
- fi`
-
-NWSOURCE = /gaunt/grossman/unsupported/Novell
-NWINCLUDES = $(NWSOURCE)/novh40
-
-LD_FOR_TARGET = ` \
- if [ -f $${rootme}/../ld/ld.new ] ; then \
- echo $${rootme}/../ld/ld.new; \
- else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(LD); \
- else \
- t='$(program_transform_name)'; echo ld | sed -e '' $$t; \
- fi; \
+ echo -lchill; \
fi`
# The use of $$(x_FOR_TARGET) reduces the command line length by not
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
- "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
"MAKEINFO=$(MAKEINFO)" \
- "NLMCONV_FOR_TARGET=$(NLMCONV_FOR_TARGET)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
SFILES = blockframe.c breakpoint.c buildsym.c c-exp.y c-lang.c \
c-typeprint.c c-valprint.c ch-exp.y ch-lang.c ch-typeprint.c \
ch-valprint.c coffread.c command.c complaints.c core.c cp-valprint.c \
- dbxread.c demangle.c dwarfread.c elfread.c environ.c eval.c expprint.c \
- findvar.c gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+ dbxread.c demangle.c dwarfread.c \
+ elfread.c environ.c eval.c expprint.c \
+ f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c \
+ gdbtypes.c infcmd.c inflow.c infrun.c language.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
- printcmd.c remote.c source.c stabsread.c stack.c symfile.c symmisc.c \
+ printcmd.c remote.c remote-nrom.c source.c stabsread.c stack.c symfile.c symmisc.c \
symtab.c target.c thread.c top.c \
typeprint.c utils.c valarith.c valops.c \
valprint.c values.c serial.c ser-unix.c mdebugread.c os9kread.c
gdb-stabs.h $(inferior_h) language.h minimon.h monitor.h \
objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
- c-lang.h ch-lang.h m2-lang.h complaints.h ns32k-opcode.h valprint.h \
+ c-lang.h ch-lang.h f-lang.h m2-lang.h \
+ complaints.h valprint.h \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
nindy-share/env.h nindy-share/stop.h \
vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
vx-share/xdr_ptrace.h vx-share/xdr_rdb.h thread.h \
- dcache.h remote-utils.h remote-sim.h top.h
+ dcache.h remote-utils.h remote-sim.h top.h somsolib.h
# Header files that already have srcdir in them, or which are in objdir.
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
-DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) $(REMOTE_O) \
- $(ENABLE_DEPFILES)
+DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) $(REMOTE_OBS) \
+ $(ENABLE_OBS)
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
expprint.o environ.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
- objfiles.o minsyms.o maint.o demangle.o dbxread.o coffread.o elfread.o \
- dwarfread.o mipsread.o stabsread.o core.o c-lang.o ch-lang.o m2-lang.o \
- complaints.o typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
- c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o nlmread.o \
- serial.o mdebugread.o os9kread.o top.o utils.o
+ exec.o objfiles.o minsyms.o maint.o demangle.o \
+ dbxread.o coffread.o elfread.o \
+ dwarfread.o mipsread.o stabsread.o core.o \
+ c-lang.o ch-lang.o f-lang.o m2-lang.o \
+ complaints.o typeprint.o \
+ c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
+ c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
+ nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o
-OBS = $(COMMON_OBS) main.o annotate.o
+OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
LIBGDB_OBS =
SUBDIRS = doc testsuite nlm
# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
-YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
+YYFILES = c-exp.tab.c f-exp.tab.c m2-exp.tab.c ch-exp.tab.c
+YYOBJ = c-exp.tab.o f-exp.tab.o m2-exp.tab.o ch-exp.tab.o
# Things which need to be built when making a distribution.
.c.o:
$(CC) -c $(INTERNAL_CFLAGS) $<
-all: gdb libgdb-files $(LIBGDB_OBS)
+all: gdb
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
installcheck:
install-only:
transformed_name=`t='$(program_transform_name)'; \
echo gdb | sed -e "s/brokensed/brokensed/" $$t` ; \
- if test "x$$transformed_name" = x; then \
- transformed_name=gdb ; \
- else \
- true ; \
- fi ; \
- $(INSTALL_PROGRAM) gdb $(bindir)/$$transformed_name ; \
- $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
+ if test "x$$transformed_name" = x; then \
+ transformed_name=gdb ; \
+ else \
+ true ; \
+ fi ; \
+ $(INSTALL_PROGRAM) gdb $(bindir)/$$transformed_name ; \
+ $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
+ # start-sanitize-gdbtk
+ if [ x"$(ENABLE_GDBTK)" != x ] ; then \
+ $(INSTALL_DATA) $(srcdir)/gdbtk.tcl $(libdir)/gdbtk.tcl ; \
+ else \
+ true ; \
+ fi
+ # end-sanitize-gdbtk
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
uninstall: force
- rm -f $(bindir)/gdb $(man1dir)/gdb.1
+ transformed_name=`t='$(program_transform_name)'; \
+ echo gdb | sed -e "s/brokensed/brokensed/" $$t` ; \
+ if test "x$$transformed_name" = x; then \
+ transformed_name=gdb ; \
+ else \
+ true ; \
+ fi ; \
+ rm -f $(bindir)/$$transformed_name $(man1dir)/$$transformed_name.1
+ # start-sanitize-gdbtk
+ if [ x"$(ENABLE_GDBTK)" != x ] ; then \
+ rm -f $(libdir)/gdbtk.tcl ; \
+ fi
+ # end-sanitize-gdbtk
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
# We do this by grepping through sources. If that turns out to be too slow,
$(CC-LD) $(INTERNAL_LDFLAGS) -o gdb \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
-prelude.o: $(NWSOURCE)/prelude.c
- rootme=`pwd`; export rootme; rootsrc=`cd $(srcdir); pwd`; export rootsrc; $(CC_FOR_TARGET) -g -I $(NWINCLUDES) -c $(NWSOURCE)/prelude.c
-
-i386-nlmstub.o: $(srcdir)/i386-nlmstub.c
- rootme=`pwd`; export rootme; rootsrc=`cd $(srcdir); pwd`; export rootsrc; $(CC_FOR_TARGET) -g -I $(NWINCLUDES) -c $(srcdir)/i386-nlmstub.c
-
-nlmstub.o: prelude.o i386-nlmstub.o
- rootme=`pwd`; export rootme; $(LD_FOR_TARGET) -r -o nlmstub.o prelude.o i386-nlmstub.o
-
-nlmstub.nlm: nlmstub.o $(srcdir)/nlmstub.def
- rootme=`pwd`; export rootme; $(NLMCONV_FOR_TARGET) -T $(srcdir)/nlmstub.def nlmstub.o nlmstub.nlm
-
-nlmstub: nlmstub.nlm
-
nlm: force
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
+libgdb: libgdb-files $(LIBGDB_OBS)
+
# libproc is not listed here because all-libproc is a dependency of all-gui,
# not all-gdb, and thus might be built after us.
LIBGDBDEPS=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
rm -f gdb1
cp gdb gdb1
-config.status:
- @echo "You must configure gdb. Look at the README file for details."
- @false
-
### fixme - this can't be right.
# This checks the configure.in file versus the config/ directory.
config-check: config-check-hosts config-check-targets
realclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
- rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS $(INFOFILES)
+ rm -f c-exp.tab.c f-exp.tab.c m2-exp.tab.c ch-exp.tab.c
+ rm -f TAGS $(INFOFILES)
rm -f nm.h tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f Makefile
else true ; fi ; \
done
-Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@
$(SHELL) config.status
+config.status: configure
+ $(SHELL) config.status --recheck
+
force:
# Documentation!
-rm y.tab.c
mv c-exp.new ./c-exp.tab.c
+f-exp.tab.o: f-exp.tab.c
+f-exp.tab.c: f-exp.y c-exp.tab.c
+ $(YACC) $(YFLAGS) $(srcdir)/f-exp.y
+ -sed -e '/extern.*malloc/d' \
+ -e '/extern.*realloc/d' \
+ -e '/extern.*free/d' \
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ < y.tab.c > f-exp.new
+ -rm y.tab.c
+ mv f-exp.new ./f-exp.tab.c
+
# ch-exp.tab.c is generated in objdir from ch-exp.y if it doesn't exist
# in srcdir, then compiled in objdir to ch-exp.tab.o.
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
ch-exp.tab.o: ch-exp.tab.c
-# the dependency here on c-exp.tab.c is artificial. Without this
+# the dependency here on f-exp.tab.c is artificial. Without this
# dependency, a parallel make will attempt to build both at the same
# time and the second yacc will pollute the first y.tab.c file.
-ch-exp.tab.c: ch-exp.y c-exp.tab.c
+ch-exp.tab.c: ch-exp.y f-exp.tab.c
$(YACC) $(YFLAGS) $(srcdir)/ch-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
mv m2-exp.new ./m2-exp.tab.c
# These files are updated atomically, so make never has to remove them
-.PRECIOUS: m2-exp.tab.c ch-exp.tab.c c-exp.tab.c
+.PRECIOUS: m2-exp.tab.c ch-exp.tab.c f-exp.tab.c c-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
## with no dependencies and no actions.
unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
-# These are things from config/*/*.m? fragments. There is no good reason
-# why they are separate from the lists of files above.
-
-HPREAD_SOURCE=
-# start-sanitize-hpread
-HPREAD_SOURCE=hpread.c
-# end-sanitize-hpread
-
ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
29k-share/udi/udi2go32.c \
- a29k-pinsn.c a29k-tdep.c a68v-nat.c alpha-nat.c alpha-tdep.c \
+ a29k-tdep.c a68v-nat.c alpha-nat.c alpha-tdep.c \
altos-xdep.c arm-convert.s \
- arm-pinsn.c arm-tdep.c arm-xdep.c coff-solib.c convex-pinsn.c \
+ arm-tdep.c arm-xdep.c coff-solib.c \
convex-tdep.c \
convex-xdep.c core-sol2.c core-svr4.c coredep.c corelow.c dcache.c \
delta68-nat.c dpx2-nat.c dstread.c exec.c fork-child.c \
- go32-xdep.c gould-pinsn.c gould-xdep.c h8300-tdep.c h8500-tdep.c \
- hp300ux-nat.c hppa-pinsn.c hppa-tdep.c hppab-nat.c hppah-nat.c \
- i386-pinsn.c i386-tdep.c i386b-nat.c i386mach-nat.c i386v-nat.c \
+ go32-xdep.c gould-tdep.c gould-xdep.c h8300-tdep.c h8500-tdep.c \
+ hp300ux-nat.c hppa-tdep.c hppab-nat.c hppah-nat.c \
+ hpread.c \
+ i386-tdep.c i386b-nat.c i386mach-nat.c i386v-nat.c \
i386aix-nat.c i386m3-nat.c i386v4-nat.c i386ly-tdep.c \
i387-tdep.c \
- i960-pinsn.c i960-tdep.c \
+ i960-tdep.c \
infptrace.c inftarg.c irix4-nat.c irix5-nat.c isi-xdep.c \
lynx-nat.c m3-nat.c \
- m68k-pinsn.c m68k-tdep.c \
- m88k-nat.c m88k-pinsn.c m88k-tdep.c mips-nat.c mips-pinsn.c \
+ m68k-tdep.c \
+ m88k-nat.c m88k-tdep.c mips-nat.c \
mips-tdep.c mipsm3-nat.c mipsv4-nat.c news-xdep.c \
nindy-share/Onindy.c nindy-share/nindy.c \
nindy-share/ttyflush.c nindy-tdep.c \
- ns32k-pinsn.c ns32km3-nat.c osfsolib.c \
- somread.c $(HPREAD_SOURCE) procfs.c pyr-pinsn.c pyr-tdep.c pyr-xdep.c \
+ ns32k-tdep.c ns32km3-nat.c osfsolib.c \
+ somread.c somsolib.c $(HPREAD_SOURCE) \
+ procfs.c pyr-tdep.c pyr-xdep.c \
remote-adapt.c remote-bug.c remote-e7000.c remote-eb.c remote-es.c \
remote-hms.c remote-mips.c \
- remote-mm.c remote-mon.c remote-nindy.c remote-os9k.c remote-sim.c \
+ remote-mm.c remote-nindy.c remote-os9k.c remote-sim.c \
remote-st.c remote-utils.c dcache.c \
- remote-udi.c remote-vx.c remote-z8k.c rs6000-nat.c rs6000-pinsn.c \
- rs6000-tdep.c ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
- sparc-pinsn.c sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
+ remote-udi.c remote-vx.c remote-vx29k.c remote-z8k.c \
+ rs6000-nat.c rs6000-tdep.c \
+ ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
+ sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
symm-tdep.c symm-nat.c \
- tahoe-pinsn.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
- vax-pinsn.c \
+ tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
+ vax-tdep.c \
vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
- xcoffexec.c xcoffread.c xcoffsolib.c z8k-tdep.c
+ xcoffread.c xcoffsolib.c z8k-tdep.c
-ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt \
+ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt config/a29k/vx29k.mt\
config/a29k/a29k.mt config/a29k/ultra3.mh config/a29k/ultra3.mt \
- config/alpha/alpha-osf1.mh config/alpha/alpha-osf1.mt \
- config/alpha/alpha-nw.mt \
+ config/alpha/alpha-osf1.mh config/alpha/alpha-osf2.mh \
+ config/alpha/alpha-osf1.mt config/alpha/alpha-nw.mt \
config/arm/arm.mh config/arm/arm.mt config/convex/convex.mh \
config/convex/convex.mt config/gould/np1.mh config/gould/np1.mt \
config/gould/pn.mh config/gould/pn.mt config/h8300/h8300hms.mt \
udr.o: $(srcdir)/29k-share/udi/udr.c $(udiheaders)
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udr.c
-a29k-pinsn.o: a29k-pinsn.c $(bfd_h) $(dis-asm_h)
a29k-tdep.o: a29k-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h)
+
a68v-nat.o: a68v-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
alpha-nat.o: alpha-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
annotate.o: annotate.c $(defs_h) annotate.h $(value_h) target.h $(gdbtypes_h)
-arm-pinsn.o: arm-pinsn.c $(OP_INCLUDE)/arm.h $(defs_h) $(symtab_h)
+arm-tdep.o: arm-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h)
blockframe.o: blockframe.c $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h symfile.h target.h
c-valprint.o: c-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h)
+f-lang.o: f-lang.c f-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h parser-defs.h $(symtab_h)
+
+f-typeprint.o: f-typeprint.c f-lang.h $(defs_h) $(expression_h) \
+ $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
+ typeprint.h $(value_h)
+
+f-valprint.o: f-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h $(symtab_h) valprint.h $(value_h)
+
ch-lang.o: ch-lang.c ch-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
coffread.o: coffread.c $(bfd_h) $(breakpoint_h) buildsym.h \
complaints.h $(defs_h) $(expression_h) $(gdbtypes_h) objfiles.h \
- symfile.h $(symtab_h) gdb-stabs.h stabsread.h
+ symfile.h $(symtab_h) gdb-stabs.h stabsread.h target.h
command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbtypes_h) $(symtab_h) $(value_h)
complaints.o: complaints.c complaints.h $(defs_h) $(gdbcmd_h)
-convex-pinsn.o: convex-pinsn.c $(OP_INCLUDE)/convex.h $(defs_h) \
- $(symtab_h)
-
convex-tdep.o: convex-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h)
convex-xdep.o: convex-xdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h)
+copying.o: copying.c $(defs_h) $(gdbcmd_h)
+
core-sol2.o: core-sol2.c $(command_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h
cp-valprint.o: cp-valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbtypes_h) $(symtab_h) $(value_h)
-dcache.o: dcache.c $(dcache_h)
+dcache.o: dcache.c $(dcache_h) $(defs_h) $(gdbcmd_h)
dbxread.o: dbxread.c $(breakpoint_h) buildsym.h $(command_h) \
complaints.h $(defs_h) $(expression_h) gdb-stabs.h $(gdbcore_h) \
$(gdbtypes_h) language.h objfiles.h partial-stab.h stabsread.h \
symfile.h $(symtab_h) target.h
-dcache.o: dcache.c $(dcache_h)
-
delta68-nat.o: delta68-nat.c $(defs_h)
demangle.o: demangle.c $(defs_h) $(gdbcmd_h)
+dpx2-nat.o: dpx2-nat.c $(defs_h) $(gdbcore_h)
+
dwarfread.o: dwarfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h)
fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h thread.h
+# start-sanitize-gdbtk
gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
$(bfd_h) symfile.h objfiles.h target.h
- $(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/gdbtk.c \
- -DGDBTK_FILENAME=\"$(libdir)/gdbtk.tcl\"
+ $(CC) -c $(INTERNAL_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
+ $(srcdir)/gdbtk.c -DGDBTK_FILENAME=\"$(libdir)/gdbtk.tcl\"
+# end-sanitize-gdbtk
gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
go32-xdep.o: go32-xdep.c
-gould-pinsn.o: gould-pinsn.c $(OP_INCLUDE)/np1.h $(defs_h) $(frame_h) \
+gould-tdep.o: gould-tdep.c $(OP_INCLUDE)/np1.h $(defs_h) $(frame_h) \
$(gdbcore_h) $(symtab_h)
gould-xdep.o: gould-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
h8300-tdep.o: h8300-tdep.c $(defs_h) $(frame_h) $(symtab_h)
h8500-tdep.o: h8500-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) \
$(value_h)
hp300ux-nat.o: hp300ux-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
-hppa-pinsn.o: hppa-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
hppa-tdep.o: hppa-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) objfiles.h symfile.h target.h
hppab-nat.o: hppab-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
hppah-nat.o: hppah-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
-i386-pinsn.o: i386-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
+
i386-tdep.o: i386-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
+
+i386aix-nat.o: i386aix-nat.c $(defs_h) $(frame_h) $(inferior_h) \
+ language.h $(gdbcore_h) $(floatformat_h) target.h
+
i386b-nat.o: i386b-nat.c $(defs_h)
+
i386ly-nat.o: i386ly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
+
i386ly-tdep.o: i386ly-tdep.c $(defs_h) $(inferior_h) target.h
+
+i386m3-nat.o: i386m3-nat.c $(defs_h) $(inferior_h) $(floatformat_h) target.h
+
i386mach-nat.o: i386mach-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
i386v-nat.o: i386v-nat.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
i387-tdep.o: i387-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) language.h
-i960-pinsn.o: i960-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
-
i960-tdep.o: i960-tdep.c $(floatformat_h) $(defs_h) $(expression_h) \
$(frame_h) $(gdbtypes_h) $(symtab_h) $(value_h)
target.h terminal.h $(command_h)
irix4-nat.o: irix4-nat.c $(defs_h) $(inferior_h)
+irix5-nat.o: irix5-nat.c $(defs_h) $(inferior_h) $(gdbcore_h) target.h \
+ $(symtab_h) symfile.h objfiles.h $(command_h) $(frame_h) regex.h \
+ language.h
isi-xdep.o: isi-xdep.c
language.o: language.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) language.h parser-defs.h $(symtab_h) \
target.h $(value_h)
+lynx-nat.o: lynx-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
+
m2-lang.o: m2-lang.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h m2-lang.h parser-defs.h $(symtab_h)
m2-valprint.o: m2-valprint.c $(defs_h) $(gdbtypes_h) $(symtab_h) \
valprint.h
-m68k-pinsn.o: m68k-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
+m3-nat.o: m3-nat.c $(defs_h) $(inferior_h) $(value_h) language.h target.h \
+ $(wait_h) $(gdbcmd_h) $(gdbcore_h)
+
m68k-tdep.o: m68k-tdep.c $(defs_h) $(frame_h) $(symtab_h)
+
m68kly-nat.o: m68kly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
+
m88k-nat.o: m88k-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
-m88k-pinsn.o: m88k-pinsn.c $(defs_h) $(symtab_h)
+
m88k-tdep.o: m88k-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
main.o: main.c top.h $(defs_h)
-annotate.o: annotate.c annotate.h $(defs_h) value.h target.h $(gdbtypes_h)
-
maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) language.h \
$(expression_h)
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h)
-os9kread.o: os9kread.c buildsym.h complaints.h $(bfd_h) $(def_h) \
+mipsm3-nat.o: mipsm3-nat.c $(defs_h) $(inferior_h)
+
+os9kread.o: os9kread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
- objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h)
+ objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) target.h
mem-break.o: mem-break.c $(defs_h)
$(symtab_h)
mips-nat.o: mips-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
-mips-pinsn.o: mips-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
mips-tdep.o: mips-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) language.h objfiles.h symfile.h
mipsv4-nat.o: mipsv4-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
+monitor.o: monitor.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) target.h serial.h terminal.h
+
news-xdep.o: news-xdep.c
Onindy.o: nindy-share/Onindy.c $(wait_h) nindy-share/block_io.h \
nlmread.o: nlmread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) stabsread.h
+ns32km3-nat.o: ns32km3-nat.c $(defs_h) $(inferior_h)
+
ttyflush.o: nindy-share/ttyflush.c
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/ttyflush.c
nindy-tdep.o: nindy-tdep.c $(defs_h) $(frame_h) $(symtab_h)
-ns32k-pinsn.o: ns32k-pinsn.c $(defs_h) $(gdbcore_h) ns32k-opcode.h \
- $(symtab_h)
+ns32k-tdep.o: ns32k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h)
objfiles.o: objfiles.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
$(symtab_h)
somread.o: somread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h)
-# start-sanitize-hpread
+somsolib.o: somsolib.c $(defs_h)
+
hpread.o: hpread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h)
-# end-sanitize-hpread
parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h)
procfs.o: procfs.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h
-pyr-pinsn.o: pyr-pinsn.c $(OP_INCLUDE)/pyr.h $(defs_h) $(gdbcore_h) \
- $(symtab_h)
-
pyr-tdep.o: pyr-tdep.c $(defs_h)
+
pyr-xdep.o: pyr-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
-regex.o: regex.c regex.h
+regex.o: regex.c regex.h $(defs_h)
remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h
remote-bug.o: remote-bug.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h $(remote_utils_h)
+remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) target.h \
+ $(wait_h) serial.h
+
remote-eb.o: remote-eb.c $(wait_h) $(srcdir)/config/a29k/tm-a29k.h \
$(defs_h) $(gdbcore_h) $(inferior_h) symfile.h target.h terminal.h
remote-mm.o: remote-mm.c $(bfd_h) $(wait_h) $(defs_h) $(inferior_h) \
minimon.h target.h terminal.h
-remote-mon.o: remote-mon.c $(wait_h) $(command_h) $(defs_h) \
- $(gdbcore_h) monitor.h serial.h target.h
-
remote-nindy.o: remote-nindy.c $(floatformat_h) $(wait_h) $(command_h) \
$(defs_h) $(gdbcore_h) $(inferior_h) \
nindy-share/env.h nindy-share/stop.h $(remote_utils_h) \
symfile.h
+remote-os9k.o: remote-os9k.c $(defs_h) $(gdbcore_h) $(wait_h) \
+ $(command_h) monitor.h $(remote_utils_h) $(symtab_h) symfile.h \
+ objfiles.h gdb-stabs.h
+
remote-sim.o: remote-sim.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h
remote-vx.o: remote-vx.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
- vx-share/xdr_rdb.h
+ vx-share/xdr_rdb.h gdb-stabs.h objfiles.h symfile.h $(bfd_h)
+
+remote-vx29k.o: remote-vx29k.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
+ $(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
+ vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
+ vx-share/xdr_rdb.h
remote-z8k.o: remote-z8k.c $(wait_h) $(srcdir)/../sim/z8k/sim.h \
$(defs_h) $(gdbcore_h) $(inferior_h) target.h terminal.h
remote.o: remote.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) $(remote_utils_h) symfile.h terminal.h
-rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
+remote-nrom.o: remote-nrom.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) $(remote_utils_h) symfile.h terminal.h
-rs6000-pinsn.o: rs6000-pinsn.c $(OP_INCLUDE)/rs6k.h $(defs_h)
+rom68k-rom.o: rom68k-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+ $(inferior_h) target.h serial.h terminal.h
+
+rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h xcoffsolib.h
ser-go32.o: ser-go32.c $(defs_h) serial.h
+
ser-tcp.o: ser-tcp.c $(defs_h) serial.h signals.h
+
ser-unix.o: ser-unix.c $(defs_h) serial.h
+
serial.o: serial.c $(defs_h) serial.h
sh-tdep.o: sh-tdep.c $(bfd_h) $(dis-asm_h) \
$(gdbcore_h) language.h objfiles.h regex.h symfile.h $(symtab_h)
sparc-nat.o: sparc-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
-sparc-pinsn.o: sparc-pinsn.c $(bfd_h) $(dis-asm_h) $(defs_h)
sparc-tdep.o: sparc-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) objfiles.h symfile.h target.h
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
regex.h symfile.h $(symtab_h) target.h $(value_h)
-tahoe-pinsn.o: tahoe-pinsn.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
+tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
$(symtab_h)
target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \
values.o: values.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) $(symtab_h) target.h $(value_h)
-vax-pinsn.o: vax-pinsn.c $(OP_INCLUDE)/vax.h $(defs_h) $(symtab_h)
+vax-tdep.o: vax-tdep.c $(OP_INCLUDE)/vax.h $(defs_h) $(symtab_h)
+
+w65-tdep.o : w65-tdep.c
xdr_ld.o: vx-share/xdr_ld.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_ld.h
vx-share/vxWorks.h vx-share/xdr_rdb.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_rdb.c
-xcoffexec.o: xcoffexec.c $(BFD_SRC)/libbfd.h $(defs_h) $(gdbcmd_h) \
- $(gdbcore_h) $(inferior_h) objfiles.h symfile.h target.h xcoffsolib.h
-
xcoffread.o: xcoffread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
$(INCLUDE_DIR)/aout/stab_gnu.h $(INCLUDE_DIR)/coff/internal.h \
$(INCLUDE_DIR)/coff/rs6000.h $(BFD_SRC)/libcoff.h buildsym.h \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+f-exp.tab.o: f-exp.tab.c f-lang.h $(defs_h) $(expression_h) \
+ language.h parser-defs.h $(value_h) $(bfd_h) objfiles.h symfile.h
+
m2-exp.tab.o: m2-exp.tab.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h