DEPDIR = @DEPDIR@
depcomp = $(SHELL) $(srcdir)/../depcomp
+PWD_COMMAND = $${PWDCMD-pwd}
+
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
COMPILE.pre = $(CC)
LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
+LIBCOMMON_DIR = common
+LIBCOMMON = $(LIBCOMMON_DIR)/libcommon.a
+LIBCOMMON_SRC = $(srcdir)/$(LIBCOMMON_DIR)
+
# Where is the READLINE library? Typically in ../readline.
READLINE_DIR = ../readline
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
python.o \
py-auto-load.o \
py-block.o \
+ py-bpevent.o \
py-breakpoint.o \
py-cmd.o \
+ py-continueevent.o \
+ py-event.o \
+ py-evtregistry.o \
+ py-evts.o \
+ py-exitedevent.o \
py-frame.o \
py-function.o \
py-inferior.o \
py-param.o \
py-prettyprint.o \
py-progspace.o \
+ py-signalevent.o \
+ py-stopevent.o \
py-symbol.o \
py-symtab.o \
+ py-threadevent.o \
py-type.o \
py-utils.o \
py-value.o
+
SUBDIR_PYTHON_SRCS = \
python/python.c \
python/py-auto-load.c \
python/py-block.c \
+ python/py-bpevent.c \
python/py-breakpoint.c \
python/py-cmd.c \
+ python/py-continueevent.c \
+ python/py-event.c \
+ python/py-evtregistry.c \
+ python/py-evts.c \
+ python/py-exitedevent.c \
python/py-frame.c \
python/py-function.c \
python/py-inferior.c \
python/py-param.c \
python/py-prettyprint.c \
python/py-progspace.c \
+ python/py-signalevent.c \
+ python/py-stopevent.c \
python/py-symbol.c \
python/py-symtab.c \
+ python/py-threadevent.c \
python/py-type.c \
python/py-utils.c \
python/py-value.c
SUBDIR_PYTHON_LDFLAGS=
SUBDIR_PYTHON_CFLAGS=
-
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
# when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
CFLAGS = @CFLAGS@
-# Set by configure, for e.g. expat.
-INTERNAL_CPPFLAGS = @CPPFLAGS@
+# Set by configure, for e.g. expat. Python installations are such that
+# C headers are included using their basename (for example, we #include
+# <Python.h> rather than, say, <python/Python.h>). Since the file names
+# are sometimes a little generic, we think that the risk of collision
+# with other header files is high. If that happens, we try to mitigate
+# a bit the consequences by putting the Python includes last in the list.
+INTERNAL_CPPFLAGS = @CPPFLAGS@ @PYTHON_CPPFLAGS@
# Need to pass this to testsuite for "make check". Probably should be
# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
# If you have the Cygnus libraries installed,
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+ $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
-lintl -liberty $(LIBGNU)
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+ $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBCOMMON)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
- $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
+ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
+ $(LIBCOMMON)
ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
# XML files to build in to GDB.
XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
$(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd \
- $(srcdir)/features/threads.dtd
+ $(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd
# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
# interface to the serial port. Hopefully if get ported to OS/2, VMS,
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
- mi/mi-common.c \
+ memrange.c mi/mi-common.c \
objc-exp.y objc-lang.c \
objfiles.c osabi.c observer.c osdata.c \
opencl-lang.c \
gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
-gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
+gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h memrange.h \
mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
memattr.o mem-break.o target.o parse.o language.o buildsym.o \
findcmd.o \
std-regs.o \
- signals.o \
exec.o reverse.o \
bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o coff-pe-read.o \
trad-frame.o \
tramp-frame.o \
solib.o solib-target.o \
- prologue-value.o memory-map.o xml-support.o xml-syscall.o \
+ prologue-value.o memory-map.o memrange.o xml-support.o xml-syscall.o \
target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
inferior.o osdata.o gdb_usleep.o record.o gcore.o \
jit.o progspace.o
TSOBS = inflow.o
SUBDIRS = doc @subdirs@ data-directory
-CLEANDIRS = $(SUBDIRS) gnulib
+CLEANDIRS = $(SUBDIRS) gnulib
# List of subdirectories in the build tree that must exist.
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
-REQUIRED_SUBDIRS = doc | testsuite | gnulib | data-directory
+REQUIRED_SUBDIRS = doc | testsuite | gnulib | data-directory | common
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.c \
@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
.PHONY: all-lib
+#
+$(LIBCOMMON): $(LIBCOMMON_DIR)/Makefile
+ @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=common subdir_do
+
+configure-common:
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ test ! -f common/Makefile || exit 0; \
+ $(SHELL) $(srcdir)/../mkinstalldirs common ; \
+ $(HOST_EXPORTS) \
+ echo Configuring in common; \
+ cd "common" || exit 1; \
+ commondir="$$s/common"; \
+ srcdiroption="--srcdir=$${commondir}"; \
+ $(SHELL) $${commondir}/configure --enable-gdbserver=no \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} $${srcdiroption} \
+ || exit 1
+
# Convenience rule to handle recursion.
.PHONY: all-data-directory
all-data-directory: data-directory/Makefile
CONFIG_LINKS= \
$(SHELL) config.status
+common/Makefile: configure-common common/Makefile.in config.status @frags@
+ CONFIG_FILES="common/Makefile" \
+ CONFIG_COMMANDS="depfiles" \
+ CONFIG_HEADERS= \
+ CONFIG_LINKS= \
+ $(SHELL) config.status
+
config.h: stamp-h ; @true
stamp-h: $(srcdir)/config.in config.status
CONFIG_HEADERS=config.h:config.in \
$(COMPILE) $(srcdir)/mi/mi-common.c
$(POSTCOMPILE)
-#
-# gdb/common/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-signals.o: $(srcdir)/common/signals.c
- $(COMPILE) $(srcdir)/common/signals.c
- $(POSTCOMPILE)
-
#
# gdb/tui/ dependencies
#
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
$(POSTCOMPILE)
+py-bpevent.o: $(srcdir)/python/py-bpevent.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c
+ $(POSTCOMPILE)
+
py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
$(POSTCOMPILE)
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
$(POSTCOMPILE)
+py-continueevent.o: $(srcdir)/python/py-continueevent.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c
+ $(POSTCOMPILE)
+
+py-event.o: $(srcdir)/python/py-event.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c
+ $(POSTCOMPILE)
+
+py-evtregistry.o: $(srcdir)/python/py-evtregistry.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c
+ $(POSTCOMPILE)
+
+py-evts.o: $(srcdir)/python/py-evts.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c
+ $(POSTCOMPILE)
+
+py-exitedevent.o: $(srcdir)/python/py-exitedevent.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c
+ $(POSTCOMPILE)
+
py-frame.o: $(srcdir)/python/py-frame.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
$(POSTCOMPILE)
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c
$(POSTCOMPILE)
+py-signalevent.o: $(srcdir)/python/py-signalevent.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c
+ $(POSTCOMPILE)
+
+py-stopevent.o: $(srcdir)/python/py-stopevent.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c
+ $(POSTCOMPILE)
+
py-symbol.o: $(srcdir)/python/py-symbol.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
$(POSTCOMPILE)
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
$(POSTCOMPILE)
+py-threadevent.o: $(srcdir)/python/py-threadevent.c
+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c
+ $(POSTCOMPILE)
+
py-type.o: $(srcdir)/python/py-type.c
$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
$(POSTCOMPILE)
projects / deliverable / binutils-gdb.git / blobdiff