-# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+# 1998, 1999, 2000 Free Software Foundation, Inc.
# This file is part of GDB.
INTL_SRC = $(srcdir)/$(INTL_DIR)
INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
+#
+# CLI sub directory definitons
+#
+SUBDIR_CLI_OBS = \
+ cli-decode.o cli-script.o cli-cmds.o cli-setshow.o
+SUBDIR_CLI_SRCS = \
+ cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c
+SUBDIR_CLI_DEPS =
+SUBDIR_CLI_INITS =
+SUBDIR_CLI_LDFLAGS=
+SUBDIR_CLI_CFLAGS=
+SUBDIR_CLI_ALL=
+SUBDIR_CLI_CLEAN=
+SUBDIR_CLI_INSTALL=
+SUBDIR_CLI_UNINSTALL=
+
#
# MI sub directory definitons
#
mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
SUBDIR_MI_DEPS =
SUBDIR_MI_INITS = \
- mi/mi-cmds.c mi/mi-parse.c mi/mi-main.c
+ mi/mi-cmds.c mi/mi-parse.c mi/mi-main.c mi/mi-out.c
SUBDIR_MI_LDFLAGS=
SUBDIR_MI_CFLAGS= \
-DUI_OUT=1
LIBGUI = @LIBGUI@
GUI_CFLAGS_X = @GUI_CFLAGS_X@
IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
+
+SUBDIR_GDBTK_OBS = \
+ gdbtk.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-varobj.o gdbtk-wrapper.o
+SUBDIR_GDBTK_SRCS = \
+ gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-cmds.c \
+ gdbtk/generic/gdbtk-hooks.c gdbtk/generic/gdbtk-varobj.c \
+ gdbtk/generic/gdbtk-wrapper.c
+SUBDIR_GDBTK_DEPS = \
+ $(LIBGUI) $(ITCL_DEPS) $(ITK_DEPS) $(TIX_DEPS) $(TK_DEPS) $(TCL_DEPS)
+SUBDIR_GDBTK_INITS = gdbtk/generic/gdbtk.c
+SUBDIR_GDBTK_LDFLAGS=
+SUBDIR_GDBTK_CFLAGS= -DGDBTK
SUBDIR_GDBTK_ALL= all-gdbtk
SUBDIR_GDBTK_CLEAN= clean-gdbtk
SUBDIR_GDBTK_INSTALL= install-gdbtk
SUBDIR_GDBTK_UNINSTALL=
CONFIG_OBS= @CONFIG_OBS@
+CONFIG_LOBS= @CONFIG_LOBS@
CONFIG_SRCS= @CONFIG_SRCS@
CONFIG_DEPS= @CONFIG_DEPS@
CONFIG_INITS= @CONFIG_INITS@
# part of libiberty) a POSIX interface. But at least for now the
# host-dependent makefile fragment might need to use something else
# besides ser-unix.o
-SER_HARDWIRE = ser-unix.o ser-pipe.o
+SER_HARDWIRE = @SER_HARDWIRE@
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
+ "infodir=$(infodir)" \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
SFILES = ax-general.c ax-gdb.c bcache.c blockframe.c breakpoint.c \
buildsym.c c-exp.y c-lang.c c-typeprint.c c-valprint.c \
ch-exp.c ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
- command.c complaints.c corefile.c cp-valprint.c dbxread.c \
+ complaints.c completer.c corefile.c cp-valprint.c dbxread.c \
demangle.c dwarfread.c dwarf2read.c elfread.c environ.c eval.c \
event-loop.c event-top.c \
expprint.c f-exp.y f-lang.c f-typeprint.c f-valprint.c \
varobj.c wrapper.c \
jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
- mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
+ mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c \
+ p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c \
printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c \
scm-valprint.c source.c stabsread.c stack.c symfile.c \
- symmisc.c symtab.c target.c thread.c top.c tracepoint.c \
+ symmisc.c symtab.c linespec.c target.c thread.c top.c tracepoint.c \
typeprint.c utils.c valarith.c valops.c valprint.c values.c \
serial.c ser-unix.c mdebugread.c os9kread.c \
tui/tui.c tui/tui.h tui/tuiCommand.c tui/tuiCommand.h \
command_h = command.h
gdbcmd_h = gdbcmd.h $(command_h)
-
call_cmds_h = call-cmds.h
+
xm_h = @xm_h@
tm_h = @tm_h@
nm_h = @nm_h@
cli_out_h = cli-out.h
arch_utils_h = arch-utils.h
+cli_decode_h = $(srcdir)/cli/cli-decode.h
+cli_cmds_h = $(srcdir)/cli/cli-cmds.h
+cli_script_h = $(srcdir)/cli/cli-script.h
+cli_setshow_h = $(srcdir)/cli/cli-setshow.h
+
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
# so that each .h file is listed exactly once (M-x tags-search works
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
c-lang.h ch-lang.h f-lang.h \
jv-lang.h \
- m2-lang.h \
+ m2-lang.h p-lang.h \
complaints.h valprint.h \
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
# Makefile.in
DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) \
- $(REMOTE_OBS) $(SIM_OBS) $(CONFIG_OBS)
+ $(REMOTE_OBS) $(SIM_OBS) $(CONFIG_LOBS)
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o regcache.o \
source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
- symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
+ symtab.o symfile.o symmisc.o linespec.o infcmd.o infrun.o \
expprint.o environ.o stack.o thread.o \
- event-loop.o event-top.o inf-loop.o \
+ event-loop.o event-top.o inf-loop.o completer.o \
gdbarch.o arch-utils.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
kod.o kod-cisco.o \
ui-out.o cli-out.o \
varobj.o wrapper.o \
jv-lang.o jv-valprint.o jv-typeprint.o \
- m2-lang.o \
+ m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c \
jv-exp.tab.c \
- f-exp.tab.c m2-exp.tab.c
+ f-exp.tab.c m2-exp.tab.c p-exp.tab.c
YYOBJ = c-exp.tab.o \
jv-exp.tab.o \
- f-exp.tab.o m2-exp.tab.o
+ f-exp.tab.o m2-exp.tab.o p-exp.tab.o
# Things which need to be built when making a distribution.
# tui-file.c.
#
-INIT_FILES = $(OBS) $(TSOBS) $(CONFIG_INITS)
+INIT_FILES = $(OBS) $(TSOBS) $(CONFIG_OBS) $(CONFIG_INITS)
init.c: $(INIT_FILES)
@echo Making init.c
@rm -f init.c-tmp init.l-tmp
init.o: init.c $(defs_h) $(call_cmds_h)
# Removing the old gdb first works better if it is running, at least on SunOS.
-gdb$(EXEEXT): main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
+gdb$(EXEEXT): main.o libgdb.a $(CONFIG_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
rm -f gdb$(EXEEXT)
- $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb$(EXEEXT) main.o libgdb.a $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
+ $(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb$(EXEEXT) \
+ main.o libgdb.a $(CONFIG_OBS) $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS)\
+ $(LOADLIBES)
nlm: force
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
#unload $(srcdir)/c-exp.y
#unload $(srcdir)/jv-exp.y
#unload $(srcdir)/m2-exp.y
+ #unload $(srcdir)/p-exp.y
#unload vx-share/*.h
#unload nindy-share/[A-Z]*
#load c-exp.tab.c
#load jv-exp.tab.c
#load m2-exp.tab.c
+ #load p-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
xm-vaxult.h: xm-vax.h
xm-vaxbsd.h: xm-vax.h
-kdb: $(NTSSTART) $(OBS) $(NTSOBS) $(ADD_DEPS) $(CDEPS)
- ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
- -lc $(CLIBS)
+kdb: $(NTSSTART) $(OBS) $(CONFIG_OBS) $(NTSOBS) $(ADD_DEPS) $(CDEPS)
+ ld -o kdb $(NTSSTART) $(OBS) $(CONFIG_OBS) $(NTSOBS) init.o \
+ $(ADD_FILES) -lc $(CLIBS)
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine. (FIXME: those
@echo "it deletes files that may require special tools to rebuild."
rm -f c-exp.tab.c \
jv-exp.tab \
- f-exp.tab.c m2-exp.tab.c
+ f-exp.tab.c m2-exp.tab.c p-exp.tab.c
rm -f TAGS $(INFOFILES)
rm -f $(YYFILES)
rm -f nm.h tm.h xm.h config.status
-rm m2-exp.tmp
mv m2-exp.new ./m2-exp.tab.c
+# p-exp.tab.c is generated in objdir from p-exp.y if it doesn't exist
+# in srcdir, then compiled in objdir to p-exp.tab.o.
+# Remove bogus decls for malloc/realloc/free which conflict with everything
+# else.
+p-exp.tab.o: p-exp.tab.c
+p-exp.tab.c: p-exp.y
+ $(SHELL) $(YLWRAP) "$(YACC)" $(srcdir)/p-exp.y y.tab.c p-exp.tmp -- $(YFLAGS)
+ -sed -e '/extern.*malloc/d' \
+ -e '/extern.*realloc/d' \
+ -e '/extern.*free/d' \
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ -e '/^#line.*y.tab.c/d' \
+ < p-exp.tmp > p-exp.new
+ -rm p-exp.tmp
+ mv p-exp.new ./p-exp.tab.c
+
# These files are updated atomically, so make never has to remove them
.PRECIOUS: m2-exp.tab.c f-exp.tab.c c-exp.tab.c
-.PRECIOUS: jv-exp.tab.c
+.PRECIOUS: jv-exp.tab.c p-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
alpha-nat.o: alpha-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
alpha-tdep.o: alpha-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
- $(inferior_h) $(symtab_h) $(dis-asm.h) gdb_string.h
+ $(inferior_h) $(symtab_h) $(dis-asm.h) gdb_string.h linespec.h
# OBSOLETE altos-xdep.o: altos-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
breakpoint.o: breakpoint.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) language.h target.h gdbthread.h gdb_string.h \
- gdb-events.h
+ gdb-events.h linespec.h
buildsym.o: buildsym.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
objfiles.h symfile.h $(symtab_h) gdb_string.h
symfile.h $(symtab_h) gdb-stabs.h stabsread.h target.h \
gdb_string.h
-command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
- $(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h gdb_wait.h
+# OBSOLETE command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
+# OBSOLETE $(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h gdb_wait.h
complaints.o: complaints.c complaints.h $(defs_h) $(gdbcmd_h)
$(inferior_h) target.h gdb_string.h
corefile.o: corefile.c $(dis-asm_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
- $(inferior_h) target.h language.h gdb_string.h
+ $(inferior_h) target.h language.h gdb_string.h completer.h
corelow.o: corelow.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h gdbthread.h gdb_string.h
$(event_top_h)
exec.o: exec.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
- target.h language.h gdb_string.h
+ target.h language.h gdb_string.h completer.h
expprint.o: expprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h) $(value_h)
tracepoint.o: tracepoint.c $(defs_h) $(symtab_h) $(frame_h) $(tracepoint_h) \
$(gdbtypes_h) $(expression_h) $(gdbcmd_h) $(value_h) target.h \
- language.h gdb_string.h $(readline_headers) $(remote_h)
+ language.h gdb_string.h $(readline_headers) $(remote_h) linespec.h
gdbarch.o: gdbarch.c $(defs_h) $(bfd_h) $(gdbcmd_h)
m3-nat.o: m3-nat.c $(defs_h) $(inferior_h) $(value_h) language.h target.h \
gdb_wait.h $(gdbcmd_h) $(gdbcore_h)
+p-lang.o: p-lang.c p-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h parser-defs.h $(symtab_h) gdb_string.h
+
+p-typeprint.o: p-typeprint.c p-lang.h $(defs_h) $(expression_h) \
+ $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
+ target.h typeprint.h $(value_h) gdb_string.h
+
+p-valprint.o: p-valprint.c p-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h $(symtab_h) valprint.h $(value_h) gdb_string.h
+
m68k-tdep.o: m68k-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(value_h) \
$(gdbcore_h) gdb_string.h
parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
- gdb_string.h
+ gdb_string.h linespec.h
ppc-bdm.o: ppc-bdm.c $(defs_h) $(gdbcore_h) gdb_string.h $(frame_h) \
$(inferior_h) $(bfd_h) symfile.h target.h gdb_wait.h $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h \
- xcoffsolib.h
+ $(gdbcore_h) xcoffsolib.h symfile.h objfiles.h gdb-stabs.h
rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
- target.h xcoffsolib.h ppc-tdep.h
+ target.h ppc-tdep.h
scm-exp.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
scm-lang.h scm-tags.h
$(inferior_h) target.h serial.h terminal.h
solib.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
- objfiles.h gnu-regex.h symfile.h target.h gdb_string.h
+ objfiles.h gnu-regex.h symfile.h target.h gdb_string.h solist.h
+
+solib-svr4.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+ objfiles.h gnu-regex.h symfile.h target.h gdb_string.h solist.h \
+ solib-svr4.h
source.o: source.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) language.h objfiles.h gnu-regex.h symfile.h $(symtab_h) \
- gdb_string.h source.h
+ gdb_string.h source.h completer.h linespec.h
sparc-nat.o: sparc-nat.c $(bfd_h) $(defs_h) $(inferior_h) $(gdbcore_h) \
target.h
sun386-nat.o: sun386-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
symfile.o: symfile.c $(breakpoint_h) complaints.h $(defs_h) \
- $(expression_h) $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) \
- language.h objfiles.h symfile.h $(symtab_h) target.h \
- gdb_string.h
+ $(expression_h) gdb-stabs.h $(gdbcmd_h) $(gdbcore_h) \
+ $(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) \
+ target.h gdb_string.h completer.h
symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
symtab.o: symtab.c call-cmds.h $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
gnu-regex.h symfile.h $(symtab_h) target.h $(value_h) \
- gdb_string.h
+ gdb_string.h linespec.h
+
+linespec.o: linespec.c linespec.h $(defs_h) $(frame_h) $(value_h) \
+ objfiles.h symfile.h completer.h $(symtab_h) \
+ $(INCLUDE_DIR)/demangle.h command.h
# OBSOLETE tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
# OBSOLETE $(symtab_h)
thread.o: thread.c $(defs_h) gdbthread.h $(gdbcmd_h) target.h
+completer.o: completer.c completer.h $(gdbtypes_h) $(symtab_h) \
+ $(defs_h) $(gdbcmd_h) $(expression_h) $(readline_headers)
+
top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
$(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \
- $(remote_utils_h) gdb_string.h $(event_loop_h) $(event_top_h) $(version_h)
+ $(remote_utils_h) gdb_string.h $(event_loop_h) $(event_top_h) \
+ completer.h $(version_h)
typeprint.o: typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
complaints.h $(defs_h) $(gdbtypes_h) objfiles.h stabsread.h symfile.h \
$(symtab_h) partial-stab.h gdb_string.h
-xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h
+xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h $(inferior_h) \
+ $(gdbcmd_h) symfile.h $(frame_h) gnu-regex.h
# FIXME: z8k-tdep.c calls _initialize_gdbtypes(). Since that isn't
# declared -Wimplicit fails. It should be using the GDBARCH framework.
language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
+p-exp.tab.o: p-exp.tab.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+ language.h p-lang.h parser-defs.h $(symtab_h) $(value_h) \
+ $(bfd_h) objfiles.h symfile.h
+
gdb-events.o: gdb-events.c gdb-events.h $(defs_h) $(gdbcmd_h)
ui-out.o: ui-out.c $(defs_h) $(ui_out_h) expression.h language.h
cli-out.o: cli-out.c $(defs_h) $(ui_out_h) $(cli_out_h)
+
varobj.o: varobj.c $(defs_h) $(frame_h) $(value_h) \
$(language_h) valprint.h varobj.h wrapper.h
- $(CC) -c $(INTERNAL_WARN_CFLAGS) $(NO_WERROR_CFLAGS) $<
+
wrapper.o: wrapper.c $(defs_h) $(frame_h) $(value_h) wrapper.h
+#
+# CLI dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the cli directory.
+
+cli-decode.o: $(srcdir)/cli/cli-decode.c $(cli_decode_h) \
+ $(cli_cmds_h) $(defs_h) $(ui_out_h) \
+ $(symtab_h) gnu-regex.h
+ $(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/cli/cli-decode.c
+
+cli-cmds.o: $(srcdir)/cli/cli-cmds.c $(cli_cmds_h) $(cli_decode_h) \
+ $(cli_script_h) $(cli_setshow_h) top.h completer.h $(defs_h) \
+ $(target_h) gdb_wait.h gnu-regex.h $(ui_out_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/cli/cli-cmds.c
+
+cli-setshow.o: $(srcdir)/cli/cli-setshow.c $(cli_setshow_h) \
+ $(cli_decode_h) $(cli_cmds_h) $(defs_h) \
+ $(value_h) $(ui_out_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/cli/cli-setshow.c
+
+cli-script.o: $(srcdir)/cli/cli-script.c $(cli_script_h) \
+ $(cli_cmds_h) $(cli_decode_h) top.h \
+ $(defs_h) $(value_h) language.h $(ui_out_h)
+ $(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/cli/cli-script.c
+
#
# MI dependencies
#