infodir = @infodir@
includedir = @includedir@
-SHELL = /bin/sh
-EXEEXT = # @EXEEXT@ # This isn't getting substituted in correctly :-(
+# This can be referenced by `INTLDEPS' as computed by CY_GNU_GETTEXT.
+top_builddir = .
+
+SHELL = @SHELL@
+EXEEXT = @EXEEXT@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
RANLIB = @RANLIB@
AWK = @AWK@
DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
srcdir = @srcdir@
VPATH = @srcdir@
-BISON=@BISON@
+BISON=@YACC@
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE_CFLAGS = -I$(READLINE_SRC)
+# Where is the INTL library? Typically in ../intl.
+INTL_DIR = ../intl
+INTL = @INTLLIBS@
+INTL_DEPS = @INTLDEPS@
+INTL_SRC = $(srcdir)/$(INTL_DIR)
+INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
+
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
TCL = @TCL_LD_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@
TCL_CFLAGS = @TCLHDIR@
TCL_DEPS =
+GDBTKLIBS = @GDBTKLIBS@
# Where is the TK library? Typically in ../tk.
TK = @TK_BUILD_LIB_SPEC@
GUI_CFLAGS_X = -I$(srcdir)/../libgui/src
-IDE_CFLAGS_X = -I$(srcdir)/../libide/src \
+IDE_CFLAGS_X = -I$(srcdir)/../libidetcl/src -I$(srcdir)/../libide/src \
`if [ x"$(ENABLE_IDE)" != x ] ; then \
echo -DIDE -I$(srcdir)/../ilu/runtime/mainloop;\
fi`
+LIBIDETCL = ../libidetcl/src/libidetcl.a
LIBIDE = ../libide/src/libide.a
IDE_X = ` \
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
- $(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(ENABLE_CFLAGS)
+ $(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
+ $(INTL_CFLAGS) $(ENABLE_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
# If you have the Cygnus libraries installed,
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty \
- $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
- -lmmalloc -liberty
-CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(LIBIBERTY) \
- $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
+ $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+ -lmmalloc -lintl -liberty
+CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(INTL) $(LIBIBERTY) \
+ $(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
$(MMALLOC) $(LIBIBERTY) $(WIN32LIBS)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
- $(OPCODES) $(MMALLOC) $(LIBIBERTY) @CONFIG_DEPS@
+ $(OPCODES) $(MMALLOC) $(INTL_DEPS) $(LIBIBERTY) @CONFIG_DEPS@
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-VERSION=4.16.2
+VERSION=4.17.1
DIST=gdb
LINT=/usr/5bin/lint
$(SHELL) $(srcdir)/../mkinstalldirs \
$(datadir)/gdbtcl/images \
$(datadir)/gdbtcl/images2 ; \
+ $(SHELL) $(srcdir)/../mkinstalldirs $(datadir)/gdbtcl/help \
+ $(datadir)/gdbtcl/help/images; \
cd $(srcdir)/gdbtcl2 ; \
- for i in *.tcl images/*.gif images2/*.gif tclIndex; \
+ for i in *.tcl images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/index.toc help/images/*.gif; \
do \
$(INSTALL_DATA) $$i $(datadir)/gdbtcl/$$i ; \
done ;
#load ../bfd/libbfd.a
#load ../readline/libreadline.a
#load ../mmalloc/libmmalloc.a
+ #load ../intl/libintl.a
#load -ltermcap
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
rm -f gdb1$(EXEEXT)
cp gdb$(EXEEXT) gdb1$(EXEEXT)
-### fixme - this can't be right.
-# This checks the configure.in file versus the config/ directory.
-config-check: config-check-hosts config-check-targets
-config-check-hosts:
- grep gdb_host= $(srcdir)/configure.in | \
- sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
- (cd $(srcdir)/config; ls *.mh) >HOSTdir.o
- diff -u HOSTconf.o HOSTdir.o
-
-### fixme - nor can this.
-config-check-targets:
- grep gdb_target= $(srcdir)/configure.in | \
- sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
- (cd $(srcdir)/config; ls *.mt) >TARGdir.o
- diff -u HOSTconf.o HOSTdir.o
-
# FIXME. These are not generated by "make depend" because they only are there
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
rm -f nm.h tm.h xm.h config.status config.h stamp-h .gdbinit
rm -f y.output yacc.acts yacc.tmp y.tab.h
rm -f config.log config.cache
- rm -f $(YYFILES)
rm -f Makefile
-maintainer-clean realclean: distclean clean
+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
+realclean: maintainer-clean
+
+local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
- @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f c-exp.tab.c jv-exp.tab.c f-exp.tab.c m2-exp.tab.c
rm -f TAGS $(INFOFILES)
+ rm -f $(YYFILES)
rm -f nm.h tm.h xm.h config.status
+do-maintainer-clean:
+ @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" \
+ subdir_do
+
diststuff: $(DISTSTUFF)
cd doc; $(MAKE) $(MFLAGS) all-doc
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
# start-sanitize-gdbtk
+gdbres.o: gdb.rc gdbtool.ico
+ $(WINDRES) --include $(srcdir) $(srcdir)/gdb.rc gdbres.o
+
gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
$(bfd_h) symfile.h objfiles.h target.h gdb_string.h $(tracepoint_h)
$(CC) -c $(INTERNAL_CFLAGS) $(IDE_CFLAGS) $(ITCL_CFLAGS) $(TIX_CFLAGS) \