SUBDIR_TUI_CFLAGS= \
-DTUI=1
+# Guile sub directory definitons for guile support.
+
+SUBDIR_GUILE_OBS = \
+ guile.o \
+ scm-arch.o \
+ scm-auto-load.o \
+ scm-block.o \
+ scm-breakpoint.o \
+ scm-disasm.o \
+ scm-exception.o \
+ scm-frame.o \
+ scm-gsmob.o \
+ scm-iterator.o \
+ scm-lazy-string.o \
+ scm-objfile.o \
+ scm-math.o \
+ scm-ports.o \
+ scm-pretty-print.o \
+ scm-safe-call.o \
+ scm-string.o \
+ scm-symbol.o \
+ scm-symtab.o \
+ scm-type.o \
+ scm-utils.o \
+ scm-value.o
+SUBDIR_GUILE_SRCS = \
+ guile/guile.c \
+ guile/scm-arch.c \
+ guile/scm-auto-load.c \
+ guile/scm-block.c \
+ guile/scm-breakpoint.c \
+ guile/scm-disasm.c \
+ guile/scm-exception.c \
+ guile/scm-frame.c \
+ guile/scm-gsmob.c \
+ guile/scm-iterator.c \
+ guile/scm-lazy-string.c \
+ guile/scm-objfile.c \
+ guile/scm-math.c \
+ guile/scm-ports.c \
+ guile/scm-pretty-print.c \
+ guile/scm-safe-call.c \
+ guile/scm-string.c \
+ guile/scm-symbol.c \
+ guile/scm-symtab.c \
+ guile/scm-type.c \
+ guile/scm-utils.c \
+ guile/scm-value.c
+SUBDIR_GUILE_DEPS =
+SUBDIR_GUILE_LDFLAGS=
+SUBDIR_GUILE_CFLAGS=
+
#
# python sub directory definitons
#
# are sometimes a little generic, we think that the risk of collision
# with other header files is high. If that happens, we try to mitigate
# a bit the consequences by putting the Python includes last in the list.
-INTERNAL_CPPFLAGS = @CPPFLAGS@ @PYTHON_CPPFLAGS@
+INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
# Need to pass this to testsuite for "make check". Probably should be
# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
+ $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
+ @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) \
$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
- remote-notif.o ctf.o
+ remote-notif.o ctf.o tracefile.o tracefile-tfile.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS = @SIM_OBS@
"MAKEHTML=$(MAKEHTML)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
- "FORCE_PARALLEL=$(FORCE_PARALLEL)"
+ "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
+ "TESTS=$(TESTS)"
# All source files that go into linking GDB.
# Links made at configuration time should not be specified here, since
jit.c \
xml-syscall.c \
annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
- regset.c sol-thread.c windows-termcap.c \
+ sol-thread.c windows-termcap.c \
common/gdb_vecs.c common/common-utils.c common/xml-utils.c \
common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \
common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \
- target/waitstatus.c
+ target/waitstatus.c common/print-utils.c common/rsp-low.c
LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
gnulib/import/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
-gdbarch.h bsd-uthread.h memory-map.h memrange.h \
+gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
rs6000-tdep.h rs6000-aix-tdep.h \
common/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
language.h nbsd-tdep.h solib-svr4.h \
-macroexp.h ui-file.h regcache.h tracepoint.h i386-tdep.h \
+macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-i386gnu.h \
config/i386/nm-fbsd.h \
common/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common/linux-btrace.h \
ctf.h common/i386-cpuid.h common/i386-gcc-cpuid.h target/resume.h \
-target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h
+target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
+common/print-utils.h common/rsp-low.h
# Header files that already have srcdir in them, or which are in objdir.
gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
cp-namespace.o \
d-support.o \
- reggroups.o regset.o \
+ reggroups.o \
trad-frame.o \
tramp-frame.o \
solib.o solib-target.o \
inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
gdb_vecs.o jit.o progspace.o skip.o probe.o \
common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
- format.o registry.o btrace.o record-btrace.o waitstatus.o
+ format.o registry.o btrace.o record-btrace.o waitstatus.o \
+ print-utils.o rsp-low.o
TSOBS = inflow.o
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
+install-guile:
+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
+
install-python:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
mips64obsd-nat.c mips64obsd-tdep.c \
msp430-tdep.c \
nios2-tdep.c nios2-linux-tdep.c \
- nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
+ nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
solib-osf.c \
somread.c solib-som.c \
posix-hdep.c \
sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
- sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
+ sparc64nbsd-nat.c sparc64nbsd-tdep.c \
+ sparc64obsd-nat.c sparc64obsd-tdep.c \
sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
sparc-ravenscar-thread.c \
spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
$(COMPILE) $(srcdir)/common/mips-linux-watch.c
$(POSTCOMPILE)
+print-utils.o: ${srcdir}/common/print-utils.c
+ $(COMPILE) $(srcdir)/common/print-utils.c
+ $(POSTCOMPILE)
+
+rsp-low.o: ${srcdir}/common/rsp-low.c
+ $(COMPILE) $(srcdir)/common/rsp-low.c
+ $(POSTCOMPILE)
+
#
# gdb/target/ dependencies
#
$(COMPILE) $(srcdir)/tui/tui-winsource.c
$(POSTCOMPILE)
+# gdb/guile dependencies
#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+guile.o: $(srcdir)/guile/guile.c
+ $(COMPILE) $(srcdir)/guile/guile.c
+ $(POSTCOMPILE)
+
+scm-arch.o: $(srcdir)/guile/scm-arch.c
+ $(COMPILE) $(srcdir)/guile/scm-arch.c
+ $(POSTCOMPILE)
+
+scm-auto-load.o: $(srcdir)/guile/scm-auto-load.c
+ $(COMPILE) $(srcdir)/guile/scm-auto-load.c
+ $(POSTCOMPILE)
+
+scm-block.o: $(srcdir)/guile/scm-block.c
+ $(COMPILE) $(srcdir)/guile/scm-block.c
+ $(POSTCOMPILE)
+
+scm-breakpoint.o: $(srcdir)/guile/scm-breakpoint.c
+ $(COMPILE) $(srcdir)/guile/scm-breakpoint.c
+ $(POSTCOMPILE)
+
+scm-disasm.o: $(srcdir)/guile/scm-disasm.c
+ $(COMPILE) $(srcdir)/guile/scm-disasm.c
+ $(POSTCOMPILE)
+
+scm-exception.o: $(srcdir)/guile/scm-exception.c
+ $(COMPILE) $(srcdir)/guile/scm-exception.c
+ $(POSTCOMPILE)
+
+scm-frame.o: $(srcdir)/guile/scm-frame.c
+ $(COMPILE) $(srcdir)/guile/scm-frame.c
+ $(POSTCOMPILE)
+
+scm-gsmob.o: $(srcdir)/guile/scm-gsmob.c
+ $(COMPILE) $(srcdir)/guile/scm-gsmob.c
+ $(POSTCOMPILE)
+
+scm-iterator.o: $(srcdir)/guile/scm-iterator.c
+ $(COMPILE) $(srcdir)/guile/scm-iterator.c
+ $(POSTCOMPILE)
+
+scm-lazy-string.o: $(srcdir)/guile/scm-lazy-string.c
+ $(COMPILE) $(srcdir)/guile/scm-lazy-string.c
+ $(POSTCOMPILE)
+
+scm-math.o: $(srcdir)/guile/scm-math.c
+ $(COMPILE) $(srcdir)/guile/scm-math.c
+ $(POSTCOMPILE)
+
+scm-objfile.o: $(srcdir)/guile/scm-objfile.c
+ $(COMPILE) $(srcdir)/guile/scm-objfile.c
+ $(POSTCOMPILE)
+
+scm-ports.o: $(srcdir)/guile/scm-ports.c
+ $(COMPILE) $(srcdir)/guile/scm-ports.c
+ $(POSTCOMPILE)
+
+scm-pretty-print.o: $(srcdir)/guile/scm-pretty-print.c
+ $(COMPILE) $(srcdir)/guile/scm-pretty-print.c
+ $(POSTCOMPILE)
+
+scm-safe-call.o: $(srcdir)/guile/scm-safe-call.c
+ $(COMPILE) $(srcdir)/guile/scm-safe-call.c
+ $(POSTCOMPILE)
+
+scm-string.o: $(srcdir)/guile/scm-string.c
+ $(COMPILE) $(srcdir)/guile/scm-string.c
+ $(POSTCOMPILE)
+
+scm-symbol.o: $(srcdir)/guile/scm-symbol.c
+ $(COMPILE) $(srcdir)/guile/scm-symbol.c
+ $(POSTCOMPILE)
+
+scm-symtab.o: $(srcdir)/guile/scm-symtab.c
+ $(COMPILE) $(srcdir)/guile/scm-symtab.c
+ $(POSTCOMPILE)
+
+scm-type.o: $(srcdir)/guile/scm-type.c
+ $(COMPILE) $(srcdir)/guile/scm-type.c
+ $(POSTCOMPILE)
+
+scm-utils.o: $(srcdir)/guile/scm-utils.c
+ $(COMPILE) $(srcdir)/guile/scm-utils.c
+ $(POSTCOMPILE)
+
+scm-value.o: $(srcdir)/guile/scm-value.c
+ $(COMPILE) $(srcdir)/guile/scm-value.c
+ $(POSTCOMPILE)
+
# gdb/python/ dependencies
#
# Need to explicitly specify the compile rule as make will do nothing
projects / deliverable / binutils-gdb.git / blobdiff