What has changed in GDB?
(Organized release by release)
+*** Changes since GDB 5.0:
+
+* New native configurations
+
+Alpha FreeBSD alpha*-*-freebsd*
+x86 FreeBSD 3.x and 4.x i[3456]86*-freebsd[34]*
+
+* New targets
+
+* OBSOLETE configurations
+
+x86 FreeBSD before 2.2 i[3456]86*-freebsd{1,2.[01]}*,
+
+* Deleted configurations
+
+* Other news:
+
+* All MIPS configurations are multi-arched.
+
+Multi-arch support is enabled for all MIPS configurations.
+
+* gdba.el deleted
+
+GUD support is now a standard part of the EMACS distribution.
+
+*** Changes in GDB 5.0:
+
+* Improved support for debugging FP programs on x86 targets
+
+Unified and much-improved support for debugging floating-point
+programs on all x86 targets. In particular, ``info float'' now
+displays the FP registers in the same format on all x86 targets, with
+greater level of detail.
+
+* Improvements and bugfixes in hardware-assisted watchpoints
+
+It is now possible to watch array elements, struct members, and
+bitfields with hardware-assisted watchpoints. Data-read watchpoints
+on x86 targets no longer erroneously trigger when the address is
+written.
+
+* Improvements in the native DJGPP version of GDB
+
+The distribution now includes all the scripts and auxiliary files
+necessary to build the native DJGPP version on MS-DOS/MS-Windows
+machines ``out of the box''.
+
+The DJGPP version can now debug programs that use signals. It is
+possible to catch signals that happened in the debuggee, deliver
+signals to it, interrupt it with Ctrl-C, etc. (Previously, a signal
+would kill the program being debugged.) Programs that hook hardware
+interrupts (keyboard, timer, etc.) can also be debugged.
+
+It is now possible to debug DJGPP programs that redirect their
+standard handles or switch them to raw (as opposed to cooked) mode, or
+even close them. The command ``run < foo > bar'' works as expected,
+and ``info terminal'' reports useful information about the debuggee's
+terminal, including raw/cooked mode, redirection, etc.
+
+The DJGPP version now uses termios functions for console I/O, which
+enables debugging graphics programs. Interrupting GDB with Ctrl-C
+also works.
+
+DOS-style file names with drive letters are now fully supported by
+GDB.
+
+It is now possible to debug DJGPP programs that switch their working
+directory. It is also possible to rerun the debuggee any number of
+times without restarting GDB; thus, you can use the same setup,
+breakpoints, etc. for many debugging sessions.
+
+* New native configurations
+
+ARM GNU/Linux arm*-*-linux*
+PowerPC GNU/Linux powerpc-*-linux*
+
+* New targets
+
+Motorola MCore mcore-*-*
+x86 VxWorks i[3456]86-*-vxworks*
+PowerPC VxWorks powerpc-*-vxworks*
+TI TMS320C80 tic80-*-*
+
+* OBSOLETE configurations
+
+Altos 3068 m68*-altos-*
+Convex c1-*-*, c2-*-*
+Pyramid pyramid-*-*
+ARM RISCix arm-*-* (as host)
+Tahoe tahoe-*-*
+
+Configurations that have been declared obsolete will be commented out,
+but the code will be left in place. If there is no activity to revive
+these configurations before the next release of GDB, the sources will
+be permanently REMOVED.
+
+* Gould support removed
+
+Support for the Gould PowerNode and NP1 has been removed.
+
+* New features for SVR4
+
+On SVR4 native platforms (such as Solaris), if you attach to a process
+without first loading a symbol file, GDB will now attempt to locate and
+load symbols from the running process's executable file.
+
+* Many C++ enhancements
+
+C++ support has been greatly improved. Overload resolution now works properly
+in almost all cases. RTTI support is on the way.
+
+* Remote targets can connect to a sub-program
+
+A popen(3) style serial-device has been added. This device starts a
+sub-process (such as a stand-alone simulator) and then communicates
+with that. The sub-program to run is specified using the syntax
+``|<program> <args>'' vis:
+
+ (gdb) set remotedebug 1
+ (gdb) target extended-remote |mn10300-elf-sim program-args
+
+* MIPS 64 remote protocol
+
+A long standing bug in the mips64 remote protocol where by GDB
+expected certain 32 bit registers (ex SR) to be transfered as 32
+instead of 64 bits has been fixed.
+
+The command ``set remote-mips64-transfers-32bit-regs on'' has been
+added to provide backward compatibility with older versions of GDB.
+
+* ``set remotebinarydownload'' replaced by ``set remote X-packet''
+
+The command ``set remotebinarydownload'' command has been replaced by
+``set remote X-packet''. Other commands in ``set remote'' family
+include ``set remote P-packet''.
+
+* Breakpoint commands accept ranges.
+
+The breakpoint commands ``enable'', ``disable'', and ``delete'' now
+accept a range of breakpoints, e.g. ``5-7''. The tracepoint command
+``tracepoint passcount'' also accepts a range of tracepoints.
+
+* ``apropos'' command added.
+
+The ``apropos'' command searches through command names and
+documentation strings, printing out matches, making it much easier to
+try to find a command that does what you are looking for.
+
+* New MI interface
+
+A new machine oriented interface (MI) has been added to GDB. This
+interface is designed for debug environments running GDB as a separate
+process. This is part of the long term libGDB project. See the
+"GDB/MI" chapter of the GDB manual for further information. It can be
+enabled by configuring with:
+
+ .../configure --enable-gdbmi
+
+*** Changes in GDB-4.18:
+
+* New native configurations
+
+HP-UX 10.20 hppa*-*-hpux10.20
+HP-UX 11.x hppa*-*-hpux11.0*
+M68K Linux m68*-*-linux*
+
+* New targets
+
+Fujitsu FR30 fr30-*-elf*
+Intel StrongARM strongarm-*-*
+Mitsubishi D30V d30v-*-*
+
+* OBSOLETE configurations
+
+Gould PowerNode, NP1 np1-*-*, pn-*-*
+
+Configurations that have been declared obsolete will be commented out,
+but the code will be left in place. If there is no activity to revive
+these configurations before the next release of GDB, the sources will
+be permanently REMOVED.
+
+* ANSI/ISO C
+
+As a compatibility experiment, GDB's source files buildsym.h and
+buildsym.c have been converted to pure standard C, no longer
+containing any K&R compatibility code. We believe that all systems in
+use today either come with a standard C compiler, or have a GCC port
+available. If this is not true, please report the affected
+configuration to bug-gdb@gnu.org immediately. See the README file for
+information about getting a standard C compiler if you don't have one
+already.
+
+* Readline 2.2
+
+GDB now uses readline 2.2.
+
+* set extension-language
+
+You can now control the mapping between filename extensions and source
+languages by using the `set extension-language' command. For instance,
+you can ask GDB to treat .c files as C++ by saying
+ set extension-language .c c++
+The command `info extensions' lists all of the recognized extensions
+and their associated languages.
+
+* Setting processor type for PowerPC and RS/6000
+
+When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target,
+you can use the `set processor' command to specify what variant of the
+PowerPC family you are debugging. The command
+
+ set processor NAME
+
+sets the PowerPC/RS6000 variant to NAME. GDB knows about the
+following PowerPC and RS6000 variants:
+
+ ppc-uisa PowerPC UISA - a PPC processor as viewed by user-level code
+ rs6000 IBM RS6000 ("POWER") architecture, user-level view
+ 403 IBM PowerPC 403
+ 403GC IBM PowerPC 403GC
+ 505 Motorola PowerPC 505
+ 860 Motorola PowerPC 860 or 850
+ 601 Motorola PowerPC 601
+ 602 Motorola PowerPC 602
+ 603 Motorola/IBM PowerPC 603 or 603e
+ 604 Motorola PowerPC 604 or 604e
+ 750 Motorola/IBM PowerPC 750 or 750
+
+At the moment, this command just tells GDB what to name the
+special-purpose processor registers. Since almost all the affected
+registers are inaccessible to user-level programs, this command is
+only useful for remote debugging in its present form.
+
+* HP-UX support
+
+Thanks to a major code donation from Hewlett-Packard, GDB now has much
+more extensive support for HP-UX. Added features include shared
+library support, kernel threads and hardware watchpoints for 11.00,
+support for HP's ANSI C and C++ compilers, and a compatibility mode
+for xdb and dbx commands.
+
+* Catchpoints
+
+HP's donation includes the new concept of catchpoints, which is a
+generalization of the old catch command. On HP-UX, it is now possible
+to catch exec, fork, and vfork, as well as library loading.
+
+This means that the existing catch command has changed; its first
+argument now specifies the type of catch to be set up. See the
+output of "help catch" for a list of catchpoint types.
+
+* Debugging across forks
+
+On HP-UX, you can choose which process to debug when a fork() happens
+in the inferior.
+
+* TUI
+
+HP has donated a curses-based terminal user interface (TUI). To get
+it, build with --enable-tui. Although this can be enabled for any
+configuration, at present it only works for native HP debugging.
+
+* GDB remote protocol additions
+
+A new protocol packet 'X' that writes binary data is now available.
+Default behavior is to try 'X', then drop back to 'M' if the stub
+fails to respond. The settable variable `remotebinarydownload'
+allows explicit control over the use of 'X'.
+
+For 64-bit targets, the memory packets ('M' and 'm') can now contain a
+full 64-bit address. The command
+
+ set remoteaddresssize 32
+
+can be used to revert to the old behaviour. For existing remote stubs
+the change should not be noticed, as the additional address information
+will be discarded.
+
+In order to assist in debugging stubs, you may use the maintenance
+command `packet' to send any text string to the stub. For instance,
+
+ maint packet heythere
+
+sends the packet "$heythere#<checksum>". Note that it is very easy to
+disrupt a debugging session by sending the wrong packet at the wrong
+time.
+
+The compare-sections command allows you to compare section data on the
+target to what is in the executable file without uploading or
+downloading, by comparing CRC checksums.
+
+* Tracing can collect general expressions
+
+You may now collect general expressions at tracepoints. This requires
+further additions to the target-side stub; see tracepoint.c and
+doc/agentexpr.texi for further details.
+
+* mask-address variable for Mips
+
+For Mips targets, you may control the zeroing of the upper 32 bits of
+a 64-bit address by entering `set mask-address on'. This is mainly
+of interest to users of embedded R4xxx and R5xxx processors.
+
+* Higher serial baud rates
+
+GDB's serial code now allows you to specify baud rates 57600, 115200,
+230400, and 460800 baud. (Note that your host system may not be able
+to achieve all of these rates.)
+
+* i960 simulator
+
+The i960 configuration now includes an initial implementation of a
+builtin simulator, contributed by Jim Wilson.
+
+
*** Changes in GDB-4.17:
* New native configurations
format. The choice is automatic, if the symbol file contains DWARF 2
information.
-start-sanitize-java
* Java frontend
GDB now includes basic Java language support. This support is
only useful with Java compilers that produce native machine code.
-end-sanitize-java
* solib-absolute-prefix and solib-search-path
For SunOS and SVR4 shared libraries, you may now set the prefix for