What has changed in GDB?
(Organized release by release)
-*** Changes since GDB-4.17:
+*** Changes since GDB-4.18:
+
+* New features
+
+On SVR4 native platforms (such as Solaris), if you attach to a process
+without first loading a symbol file, GDB will now attempt to locate and
+load symbols from the running process's executable file.
+
+* New native configurations
+
+ARM GNU/Linux arm*-*-linux*
+
+* New targets
+
+Motorola MCore mcore-*-*
+x86 VxWorks i[3456]86-*-vxworks*
+PowerPC VxWorks powerpc-*-vxworks*
+TI TMS320C80 tic80-*-*
+
+* OBSOLETE configurations
+
+Altos 3068 m68*-altos-*
+Convex c1-*-*, c2-*-*
+Pyramid pyramid-*-*
+ARM RISCix arm-*-* (as host)
+Tahoe tahoe-*-*
+
+* Remote targets can connect to a sub-program
+
+A popen(3) style serial-device has been added. This device starts a
+sub-process (such as a stand-alone simulator) and then communicates
+with that. The sub-program to run is specified using the syntax
+``|<program> <args>'' vis:
+
+ (gdb) set remotedebug 1
+ (gdb) target extended-remote |mn10300-elf-sim program-args
+
+* MIPS 64 remote protocol
+
+A long standing bug in the mips64 remote protocol where by GDB
+expected certain 32 bit registers (ex SR) to be transfered as 32
+instead of 64 bits has been fixed.
+
+The command ``set remote-mips64-transfers-32bit-regs on'' has been
+added to provide backward compatibility with older versions of GDB.
+
+* ``set remotebinarydownload'' replaced by ``set remote X-packet''
+
+The command ``set remotebinarydownload'' command has been replaced by
+``set remote X-packet''. Other commands in ``set remote'' family
+include ``set remote P-packet''.
+
+* Breakpoint commands accept ranges.
+
+The breakpoint commands ``enable'', ``disable'', and ``delete'' now
+accept a range of breakpoints, e.g. ``5-7''. The tracepoint command
+``tracepoint passcount'' also accepts a range of tracepoints.
+
+*** Changes in GDB-4.18:
* New native configurations
* New targets
Fujitsu FR30 fr30-*-elf*
+Intel StrongARM strongarm-*-*
Mitsubishi D30V d30v-*-*
* OBSOLETE configurations
these configurations before the next release of GDB, the sources will
be permanently REMOVED.
+* ANSI/ISO C
+
+As a compatibility experiment, GDB's source files buildsym.h and
+buildsym.c have been converted to pure standard C, no longer
+containing any K&R compatibility code. We believe that all systems in
+use today either come with a standard C compiler, or have a GCC port
+available. If this is not true, please report the affected
+configuration to bug-gdb@gnu.org immediately. See the README file for
+information about getting a standard C compiler if you don't have one
+already.
+
* Readline 2.2
GDB now uses readline 2.2.
-** The PowerPC and RS6000 targets now have a `set processor' command.
+* set extension-language
+
+You can now control the mapping between filename extensions and source
+languages by using the `set extension-language' command. For instance,
+you can ask GDB to treat .c files as C++ by saying
+ set extension-language .c c++
+The command `info extensions' lists all of the recognized extensions
+and their associated languages.
+
+* Setting processor type for PowerPC and RS/6000
When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target,
you can use the `set processor' command to specify what variant of the
registers are inaccessible to user-level programs, this command is
only useful for remote debugging in its present form.
-* HP-UX Support
+* HP-UX support
-Thanks to a major code donation from HP, GDB now has much more
-extensive support for HP-UX. Added features include shared library
-support, kernel threads and hardware watchpoints for 11.00, support
-for HP's ANSI C and C++ compilers, and compatibility mode for xdb
-commands.
+Thanks to a major code donation from Hewlett-Packard, GDB now has much
+more extensive support for HP-UX. Added features include shared
+library support, kernel threads and hardware watchpoints for 11.00,
+support for HP's ANSI C and C++ compilers, and a compatibility mode
+for xdb and dbx commands.
* Catchpoints
generalization of the old catch command. On HP-UX, it is now possible
to catch exec, fork, and vfork, as well as library loading.
-* Debugging Across Forks
+This means that the existing catch command has changed; its first
+argument now specifies the type of catch to be set up. See the
+output of "help catch" for a list of catchpoint types.
+
+* Debugging across forks
On HP-UX, you can choose which process to debug when a fork() happens
in the inferior.
* TUI
HP has donated a curses-based terminal user interface (TUI). To get
-it, build with --enable-tui.
+it, build with --enable-tui. Although this can be enabled for any
+configuration, at present it only works for native HP debugging.
-* GDB Remote protocol
+* GDB remote protocol additions
A new protocol packet 'X' that writes binary data is now available.
Default behavior is to try 'X', then drop back to 'M' if the stub
fails to respond. The settable variable `remotebinarydownload'
allows explicit control over the use of 'X'.
-For 64 bit targets, the memory packets ("M" and "m") can now contain a
-full 64 bit address. The class-obscure gdb command:
- set targetaddresssize 32
-can be used to revert to the old behavour. For existing remote stubs
-the change should not be noticed as the additional address information
+For 64-bit targets, the memory packets ('M' and 'm') can now contain a
+full 64-bit address. The command
+
+ set remoteaddresssize 32
+
+can be used to revert to the old behaviour. For existing remote stubs
+the change should not be noticed, as the additional address information
will be discarded.
-* Changes to particular targets
+In order to assist in debugging stubs, you may use the maintenance
+command `packet' to send any text string to the stub. For instance,
+
+ maint packet heythere
+
+sends the packet "$heythere#<checksum>". Note that it is very easy to
+disrupt a debugging session by sending the wrong packet at the wrong
+time.
+
+The compare-sections command allows you to compare section data on the
+target to what is in the executable file without uploading or
+downloading, by comparing CRC checksums.
+
+* Tracing can collect general expressions
+
+You may now collect general expressions at tracepoints. This requires
+further additions to the target-side stub; see tracepoint.c and
+doc/agentexpr.texi for further details.
+
+* mask-address variable for Mips
+
+For Mips targets, you may control the zeroing of the upper 32 bits of
+a 64-bit address by entering `set mask-address on'. This is mainly
+of interest to users of embedded R4xxx and R5xxx processors.
+
+* Higher serial baud rates
+
+GDB's serial code now allows you to specify baud rates 57600, 115200,
+230400, and 460800 baud. (Note that your host system may not be able
+to achieve all of these rates.)
+
+* i960 simulator
+
+The i960 configuration now includes an initial implementation of a
+builtin simulator, contributed by Jim Wilson.
+
*** Changes in GDB-4.17: