What has changed in GDB?
(Organized release by release)
+*** Changes since GDB-4.16:
+
+* New native configurations
+
+Alpha Linux alpha-*-linux*
+
+* New targets
+
+M68K with dBUG monitor m68*-*-{aout,coff,elf}
+
+*** Changes in GDB-4.16:
+
+* New native configurations
+
+Windows 95, x86 Windows NT i[345]86-*-cygwin32
+M68K NetBSD m68k-*-netbsd*
+PowerPC AIX 4.x powerpc-*-aix*
+PowerPC MacOS powerpc-*-macos*
+PowerPC Windows NT powerpcle-*-cygwin32
+RS/6000 AIX 4.x rs6000-*-aix4*
+
+* New targets
+
+ARM with RDP protocol arm-*-*
+I960 with MON960 i960-*-coff
+MIPS VxWorks mips*-*-vxworks*
+MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf*
+PowerPC with PPCBUG monitor powerpc{,le}-*-eabi*
+Hitachi SH3 sh-*-*
+Matra Sparclet sparclet-*-*
+
+* PowerPC simulator
+
+The powerpc-eabi configuration now includes the PSIM simulator,
+contributed by Andrew Cagney, with assistance from Mike Meissner.
+PSIM is a very elaborate model of the PowerPC, including not only
+basic instruction set execution, but also details of execution unit
+performance and I/O hardware. See sim/ppc/README for more details.
+
+* Solaris 2.5
+
+GDB now works with Solaris 2.5.
+
+* Windows 95/NT native
+
+GDB will now work as a native debugger on Windows 95 and Windows NT.
+To build it from source, you must use the "gnu-win32" environment,
+which uses a DLL to emulate enough of Unix to run the GNU tools.
+Further information, binaries, and sources are available at
+ftp.cygnus.com, under pub/gnu-win32.
+
+* dont-repeat command
+
+If a user-defined command includes the command `dont-repeat', then the
+command will not be repeated if the user just types return. This is
+useful if the command is time-consuming to run, so that accidental
+extra keystrokes don't run the same command many times.
+
+* Send break instead of ^C
+
+The standard remote protocol now includes an option to send a break
+rather than a ^C to the target in order to interrupt it. By default,
+GDB will send ^C; to send a break, set the variable `remotebreak' to 1.
+
+* Remote protocol timeout
+
+The standard remote protocol includes a new variable `remotetimeout'
+that allows you to set the number of seconds before GDB gives up trying
+to read from the target. The default value is 2.
+
+* Automatic tracking of dynamic object loading (HPUX and Solaris only)
+
+By default GDB will automatically keep track of objects as they are
+loaded and unloaded by the dynamic linker. By using the command `set
+stop-on-solib-events 1' you can arrange for GDB to stop the inferior
+when shared library events occur, thus allowing you to set breakpoints
+in shared libraries which are explicitly loaded by the inferior.
+
+Note this feature does not work on hpux8. On hpux9 you must link
+/usr/lib/end.o into your program. This feature should work
+automatically on hpux10.
+
+* Irix 5.x hardware watchpoint support
+
+Irix 5 configurations now support the use of hardware watchpoints.
+
+* Mips protocol "SYN garbage limit"
+
+When debugging a Mips target using the `target mips' protocol, you
+may set the number of characters that GDB will ignore by setting
+the `syn-garbage-limit'. A value of -1 means that GDB will ignore
+every character. The default value is 1050.
+
+* Recording and replaying remote debug sessions
+
+If you set `remotelogfile' to the name of a file, gdb will write to it
+a recording of a remote debug session. This recording may then be
+replayed back to gdb using "gdbreplay". See gdbserver/README for
+details. This is useful when you have a problem with GDB while doing
+remote debugging; you can make a recording of the session and send it
+to someone else, who can then recreate the problem.
+
+* Speedups for remote debugging
+
+GDB includes speedups for downloading and stepping MIPS systems using
+the IDT monitor, fast downloads to the Hitachi SH E7000 emulator,
+and more efficient S-record downloading.
+
+* Memory use reductions and statistics collection
+
+GDB now uses less memory and reports statistics about memory usage.
+Try the `maint print statistics' command, for example.
+
*** Changes in GDB-4.15:
+* Psymtabs for XCOFF
+
+The symbol reader for AIX GDB now uses partial symbol tables. This
+can greatly improve startup time, especially for large executables.
+
* Remote targets use caching
Remote targets now use a data cache to speed up communication with the
-remote side.
-The data cache could lead to incorrect results because it doesn't know
-about volatile variables, thus making it impossible to debug targets
-which use memory mapped I/O devices. `set remotecache off' turns the
-the data cache off.
+remote side. The data cache could lead to incorrect results because
+it doesn't know about volatile variables, thus making it impossible to
+debug targets which use memory mapped I/O devices. `set remotecache
+off' turns the the data cache off.
-* New native configurations
+* Remote targets may have threads
+
+The standard remote protocol now includes support for multiple threads
+in the target system, using new protocol commands 'H' and 'T'. See
+gdb/remote.c for details.
+
+* NetROM support
+
+If GDB is configured with `--enable-netrom', then it will include
+support for the NetROM ROM emulator from XLNT Designs. The NetROM
+acts as though it is a bank of ROM on the target board, but you can
+write into it over the network. GDB's support consists only of
+support for fast loading into the emulated ROM; to debug, you must use
+another protocol, such as standard remote protocol. The usual
+sequence is something like
+
+ target nrom <netrom-hostname>
+ load <prog>
+ target remote <netrom-hostname>:1235
+
+* Macintosh host
+
+GDB now includes support for the Apple Macintosh, as a host only. It
+may be run as either an MPW tool or as a standalone application, and
+it can debug through the serial port. All the usual GDB commands are
+available, but to the target command, you must supply "serial" as the
+device type instead of "/dev/ttyXX". See mpw-README in the main
+directory for more information on how to build. The MPW configuration
+scripts */mpw-config.in support only a few targets, and only the
+mips-idt-ecoff target has been tested.
+
+* Autoconf
-Microsoft NT and Microsoft Windows95 i[345]86-*-win32
+GDB configuration now uses autoconf. This is not user-visible,
+but does simplify configuration and building.
-* New Targets
+* hpux10
-ARM via RDP protocol arm-*-*
+GDB now supports hpux10.
*** Changes in GDB-4.14:
projects / deliverable / binutils-gdb.git / blobdiff