- What has changed since GDB-3.5?
- (Organized release by release)
+ What has changed in GDB?
+ (Organized release by release)
+
+*** Changes since GDB-4.16:
+
+* New native configurations
+
+Alpha Linux alpha-*-linux*
+
+*** Changes in GDB-4.16:
+
+* New native configurations
+
+Windows 95, x86 Windows NT i[345]86-*-cygwin32
+M68K NetBSD m68k-*-netbsd*
+PowerPC AIX 4.x powerpc-*-aix*
+PowerPC MacOS powerpc-*-macos*
+PowerPC Windows NT powerpcle-*-cygwin32
+RS/6000 AIX 4.x rs6000-*-aix4*
+
+* New targets
+
+ARM with RDP protocol arm-*-*
+I960 with MON960 i960-*-coff
+MIPS VxWorks mips*-*-vxworks*
+MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf*
+PowerPC with PPCBUG monitor powerpc{,le}-*-eabi*
+Hitachi SH3 sh-*-*
+Matra Sparclet sparclet-*-*
+
+* PowerPC simulator
+
+The powerpc-eabi configuration now includes the PSIM simulator,
+contributed by Andrew Cagney, with assistance from Mike Meissner.
+PSIM is a very elaborate model of the PowerPC, including not only
+basic instruction set execution, but also details of execution unit
+performance and I/O hardware. See sim/ppc/README for more details.
+
+* Solaris 2.5
+
+GDB now works with Solaris 2.5.
+
+* Windows 95/NT native
+
+GDB will now work as a native debugger on Windows 95 and Windows NT.
+To build it from source, you must use the "gnu-win32" environment,
+which uses a DLL to emulate enough of Unix to run the GNU tools.
+Further information, binaries, and sources are available at
+ftp.cygnus.com, under pub/gnu-win32.
+
+* dont-repeat command
+
+If a user-defined command includes the command `dont-repeat', then the
+command will not be repeated if the user just types return. This is
+useful if the command is time-consuming to run, so that accidental
+extra keystrokes don't run the same command many times.
+
+* Send break instead of ^C
+
+The standard remote protocol now includes an option to send a break
+rather than a ^C to the target in order to interrupt it. By default,
+GDB will send ^C; to send a break, set the variable `remotebreak' to 1.
+
+* Remote protocol timeout
+
+The standard remote protocol includes a new variable `remotetimeout'
+that allows you to set the number of seconds before GDB gives up trying
+to read from the target. The default value is 2.
+
+* Automatic tracking of dynamic object loading (HPUX and Solaris only)
+
+By default GDB will automatically keep track of objects as they are
+loaded and unloaded by the dynamic linker. By using the command `set
+stop-on-solib-events 1' you can arrange for GDB to stop the inferior
+when shared library events occur, thus allowing you to set breakpoints
+in shared libraries which are explicitly loaded by the inferior.
+
+Note this feature does not work on hpux8. On hpux9 you must link
+/usr/lib/end.o into your program. This feature should work
+automatically on hpux10.
+
+* Irix 5.x hardware watchpoint support
+
+Irix 5 configurations now support the use of hardware watchpoints.
+
+* Mips protocol "SYN garbage limit"
+
+When debugging a Mips target using the `target mips' protocol, you
+may set the number of characters that GDB will ignore by setting
+the `syn-garbage-limit'. A value of -1 means that GDB will ignore
+every character. The default value is 1050.
+
+* Recording and replaying remote debug sessions
+
+If you set `remotelogfile' to the name of a file, gdb will write to it
+a recording of a remote debug session. This recording may then be
+replayed back to gdb using "gdbreplay". See gdbserver/README for
+details. This is useful when you have a problem with GDB while doing
+remote debugging; you can make a recording of the session and send it
+to someone else, who can then recreate the problem.
+
+* Speedups for remote debugging
+
+GDB includes speedups for downloading and stepping MIPS systems using
+the IDT monitor, fast downloads to the Hitachi SH E7000 emulator,
+and more efficient S-record downloading.
+
+* Memory use reductions and statistics collection
+
+GDB now uses less memory and reports statistics about memory usage.
+Try the `maint print statistics' command, for example.
+
+*** Changes in GDB-4.15:
+
+* Psymtabs for XCOFF
+
+The symbol reader for AIX GDB now uses partial symbol tables. This
+can greatly improve startup time, especially for large executables.
+
+* Remote targets use caching
+
+Remote targets now use a data cache to speed up communication with the
+remote side. The data cache could lead to incorrect results because
+it doesn't know about volatile variables, thus making it impossible to
+debug targets which use memory mapped I/O devices. `set remotecache
+off' turns the the data cache off.
+
+* Remote targets may have threads
+
+The standard remote protocol now includes support for multiple threads
+in the target system, using new protocol commands 'H' and 'T'. See
+gdb/remote.c for details.
+
+* NetROM support
+
+If GDB is configured with `--enable-netrom', then it will include
+support for the NetROM ROM emulator from XLNT Designs. The NetROM
+acts as though it is a bank of ROM on the target board, but you can
+write into it over the network. GDB's support consists only of
+support for fast loading into the emulated ROM; to debug, you must use
+another protocol, such as standard remote protocol. The usual
+sequence is something like
+
+ target nrom <netrom-hostname>
+ load <prog>
+ target remote <netrom-hostname>:1235
+
+* Macintosh host
+
+GDB now includes support for the Apple Macintosh, as a host only. It
+may be run as either an MPW tool or as a standalone application, and
+it can debug through the serial port. All the usual GDB commands are
+available, but to the target command, you must supply "serial" as the
+device type instead of "/dev/ttyXX". See mpw-README in the main
+directory for more information on how to build. The MPW configuration
+scripts */mpw-config.in support only a few targets, and only the
+mips-idt-ecoff target has been tested.
+
+* Autoconf
+
+GDB configuration now uses autoconf. This is not user-visible,
+but does simplify configuration and building.
+
+* hpux10
+
+GDB now supports hpux10.
+
+*** Changes in GDB-4.14:
+
+* New native configurations
+
+x86 FreeBSD i[345]86-*-freebsd
+x86 NetBSD i[345]86-*-netbsd
+NS32k NetBSD ns32k-*-netbsd
+Sparc NetBSD sparc-*-netbsd
+
+* New targets
+
+A29K VxWorks a29k-*-vxworks
+HP PA PRO embedded (WinBond W89K & Oki OP50N) hppa*-*-pro*
+CPU32 EST-300 emulator m68*-*-est*
+PowerPC ELF powerpc-*-elf
+WDC 65816 w65-*-*
+
+* Alpha OSF/1 support for procfs
+
+GDB now supports procfs under OSF/1-2.x and higher, which makes it
+possible to attach to running processes. As the mounting of the /proc
+filesystem is optional on the Alpha, GDB automatically determines
+the availability of /proc during startup. This can lead to problems
+if /proc is unmounted after GDB has been started.
+
+* Arguments to user-defined commands
+
+User commands may accept up to 10 arguments separated by whitespace.
+Arguments are accessed within the user command via $arg0..$arg9. A
+trivial example:
+define adder
+ print $arg0 + $arg1 + $arg2
+
+To execute the command use:
+adder 1 2 3
+
+Defines the command "adder" which prints the sum of its three arguments.
+Note the arguments are text substitutions, so they may reference variables,
+use complex expressions, or even perform inferior function calls.
+
+* New `if' and `while' commands
+
+This makes it possible to write more sophisticated user-defined
+commands. Both commands take a single argument, which is the
+expression to evaluate, and must be followed by the commands to
+execute, one per line, if the expression is nonzero, the list being
+terminated by the word `end'. The `if' command list may include an
+`else' word, which causes the following commands to be executed only
+if the expression is zero.
+
+* Fortran source language mode
+
+GDB now includes partial support for Fortran 77. It will recognize
+Fortran programs and can evaluate a subset of Fortran expressions, but
+variables and functions may not be handled correctly. GDB will work
+with G77, but does not yet know much about symbols emitted by other
+Fortran compilers.
+
+* Better HPUX support
+
+Most debugging facilities now work on dynamic executables for HPPAs
+running hpux9 or later. You can attach to running dynamically linked
+processes, but by default the dynamic libraries will be read-only, so
+for instance you won't be able to put breakpoints in them. To change
+that behavior do the following before running the program:
+
+ adb -w a.out
+ __dld_flags?W 0x5
+ control-d
+
+This will cause the libraries to be mapped private and read-write.
+To revert to the normal behavior, do this:
+
+ adb -w a.out
+ __dld_flags?W 0x4
+ control-d
+
+You cannot set breakpoints or examine data in the library until after
+the library is loaded if the function/data symbols do not have
+external linkage.
+
+GDB can now also read debug symbols produced by the HP C compiler on
+HPPAs (sorry, no C++, Fortran or 68k support).
+
+* Target byte order now dynamically selectable
+
+You can choose which byte order to use with a target system, via the
+commands "set endian big" and "set endian little", and you can see the
+current setting by using "show endian". You can also give the command
+"set endian auto", in which case GDB will use the byte order
+associated with the executable. Currently, only embedded MIPS
+configurations support dynamic selection of target byte order.
+
+* New DOS host serial code
+
+This version uses DPMI interrupts to handle buffered I/O, so you
+no longer need to run asynctsr when debugging boards connected to
+a PC's serial port.
+
+*** Changes in GDB-4.13:
+
+* New "complete" command
+
+This lists all the possible completions for the rest of the line, if it
+were to be given as a command itself. This is intended for use by emacs.
+
+* Trailing space optional in prompt
+
+"set prompt" no longer adds a space for you after the prompt you set. This
+allows you to set a prompt which ends in a space or one that does not.
+
+* Breakpoint hit counts
+
+"info break" now displays a count of the number of times the breakpoint
+has been hit. This is especially useful in conjunction with "ignore"; you
+can ignore a large number of breakpoint hits, look at the breakpoint info
+to see how many times the breakpoint was hit, then run again, ignoring one
+less than that number, and this will get you quickly to the last hit of
+that breakpoint.
+
+* Ability to stop printing at NULL character
+
+"set print null-stop" will cause GDB to stop printing the characters of
+an array when the first NULL is encountered. This is useful when large
+arrays actually contain only short strings.
+
+* Shared library breakpoints
+
+In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set
+breakpoints in shared libraries before the executable is run.
+
+* Hardware watchpoints
+
+There is a new hardware breakpoint for the watch command for sparclite
+targets. See gdb/sparclite/hw_breakpoint.note.
+
+Hardware watchpoints are also now supported under Linux.
+
+* Annotations
+
+Annotations have been added. These are for use with graphical interfaces,
+and are still experimental. Currently only gdba.el uses these.
+
+* Improved Irix 5 support
+
+GDB now works properly with Irix 5.2.
+
+* Improved HPPA support
+
+GDB now works properly with the latest GCC and GAS.
+
+* New native configurations
+
+Sequent PTX4 i[34]86-sequent-ptx4
+HPPA running OSF/1 hppa*-*-osf*
+Atari TT running SVR4 m68*-*-sysv4*
+RS/6000 LynxOS rs6000-*-lynxos*
+
+* New targets
+
+OS/9000 i[34]86-*-os9k
+MIPS R4000 mips64*{,el}-*-{ecoff,elf}
+Sparc64 sparc64-*-*
+
+* Hitachi SH7000 and E7000-PC ICE support
+
+There is now support for communicating with the Hitachi E7000-PC ICE.
+This is available automatically when GDB is configured for the SH.
+
+* Fixes
+
+As usual, a variety of small fixes and improvements, both generic
+and configuration-specific. See the ChangeLog for more detail.
+
+*** Changes in GDB-4.12:
+
+* Irix 5 is now supported
+
+* HPPA support
+
+GDB-4.12 on the HPPA has a number of changes which make it unable
+to debug the output from the currently released versions of GCC and
+GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36). Until the next major release
+of GCC and GAS, versions of these tools designed to work with GDB-4.12
+can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist.
+
+
+*** Changes in GDB-4.11:
+
+* User visible changes:
+
+* Remote Debugging
+
+The "set remotedebug" option is now consistent between the mips remote
+target, remote targets using the gdb-specific protocol, UDI (AMD's
+debug protocol for the 29k) and the 88k bug monitor. It is now an
+integer specifying a debug level (normally 0 or 1, but 2 means more
+debugging info for the mips target).
+
+* DEC Alpha native support
+
+GDB now works on the DEC Alpha. GCC 2.4.5 does not produce usable
+debug info, but GDB works fairly well with the DEC compiler and should
+work with a future GCC release. See the README file for a few
+Alpha-specific notes.
+
+* Preliminary thread implementation
+
+GDB now has preliminary thread support for both SGI/Irix and LynxOS.
+
+* LynxOS native and target support for 386
+
+This release has been hosted on LynxOS 2.2, and also can be configured
+to remotely debug programs running under LynxOS (see gdb/gdbserver/README
+for details).
+
+* Improvements in C++ mangling/demangling.
+
+This release has much better g++ debugging, specifically in name
+mangling/demangling, virtual function calls, print virtual table,
+call methods, ...etc.
+
+*** Changes in GDB-4.10:
+
+ * User visible changes:
+
+Remote debugging using the GDB-specific (`target remote') protocol now
+supports the `load' command. This is only useful if you have some
+other way of getting the stub to the target system, and you can put it
+somewhere in memory where it won't get clobbered by the download.
+
+Filename completion now works.
+
+When run under emacs mode, the "info line" command now causes the
+arrow to point to the line specified. Also, "info line" prints
+addresses in symbolic form (as well as hex).
+
+All vxworks based targets now support a user settable option, called
+vxworks-timeout. This option represents the number of seconds gdb
+should wait for responses to rpc's. You might want to use this if
+your vxworks target is, perhaps, a slow software simulator or happens
+to be on the far side of a thin network line.
+
+ * DEC alpha support
+
+This release contains support for using a DEC alpha as a GDB host for
+cross debugging. Native alpha debugging is not supported yet.
+
+
+*** Changes in GDB-4.9:
+
+ * Testsuite
+
+This is the first GDB release which is accompanied by a matching testsuite.
+The testsuite requires installation of dejagnu, which should be available
+via ftp from most sites that carry GNU software.
+
+ * C++ demangling
+
+'Cfront' style demangling has had its name changed to 'ARM' style, to
+emphasize that it was written from the specifications in the C++ Annotated
+Reference Manual, not necessarily to be compatible with AT&T cfront. Despite
+disclaimers, it still generated too much confusion with users attempting to
+use gdb with AT&T cfront.
+
+ * Simulators
+
+GDB now uses a standard remote interface to a simulator library.
+So far, the library contains simulators for the Zilog Z8001/2, the
+Hitachi H8/300, H8/500 and Super-H.
+
+ * New targets supported
+
+H8/300 simulator h8300-hitachi-hms or h8300hms
+H8/500 simulator h8500-hitachi-hms or h8500hms
+SH simulator sh-hitachi-hms or sh
+Z8000 simulator z8k-zilog-none or z8ksim
+IDT MIPS board over serial line mips-idt-ecoff
+
+Cross-debugging to GO32 targets is supported. It requires a custom
+version of the i386-stub.c module which is integrated with the
+GO32 memory extender.
+
+ * New remote protocols
+
+MIPS remote debugging protocol.
+
+ * New source languages supported
+
+This version includes preliminary support for Chill, a Pascal like language
+used by telecommunications companies. Chill support is also being integrated
+into the GNU compiler, but we don't know when it will be publically available.
+
*** Changes in GDB-4.8:
version of this support was available as a set of patches from the
University of Utah. GDB does not support debugging of programs
compiled with the HP compiler, because HP will not document their file
-format. Instead, you must use GCC (version 2.3.3 or later) and PA-GAS
+format. Instead, you must use GCC (version 2.3.2 or later) and PA-GAS
(as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z).
Many problems in the preliminary version have been fixed.
from the specifications in the Annotated Reference Manual, which AT&T's
compiler does not actually implement.
+ * G++ multiple inheritance compiler problem
+
+In the 2.3.2 release of gcc/g++, how the compiler resolves multiple
+inheritance lattices was reworked to properly discover ambiguities. We
+recently found an example which causes this new algorithm to fail in a
+very subtle way, producing bad debug information for those classes.
+The file 'gcc.patch' (in this directory) can be applied to gcc to
+circumvent the problem. A future GCC release will contain a complete
+fix.
+
+The previous G++ debug info problem (mentioned below for the gdb-4.7
+release) is fixed in gcc version 2.3.2.
+
* Improved configure script
The `configure' script will now attempt to guess your system type if
projects / deliverable / binutils-gdb.git / blobdiff