/* Native-dependent code for GNU/Linux AArch64.
- Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Copyright (C) 2011-2019 Free Software Foundation, Inc.
Contributed by ARM Ltd.
This file is part of GDB.
#include "gdbcmd.h"
#include "aarch64-tdep.h"
#include "aarch64-linux-tdep.h"
+#include "aarch32-linux-nat.h"
+#include "nat/aarch64-linux.h"
+#include "nat/aarch64-linux-hw-point.h"
+#include "nat/aarch64-sve-linux-ptrace.h"
+
+#include "elf/external.h"
#include "elf/common.h"
-#include <sys/ptrace.h>
+#include "nat/gdb_ptrace.h"
#include <sys/utsname.h>
+#include <asm/ptrace.h>
#include "gregset.h"
-
-#include "features/aarch64.c"
+#include "linux-tdep.h"
/* Defines ps_err_e, struct ps_prochandle. */
#include "gdb_proc_service.h"
#define TRAP_HWBKPT 0x0004
#endif
-/* On GNU/Linux, threads are implemented as pseudo-processes, in which
- case we may be tracing more than one process at a time. In that
- case, inferior_ptid will contain the main process ID and the
- individual thread (process) ID. get_thread_id () is used to get
- the thread id if it's available, and the process id otherwise. */
-
-static int
-get_thread_id (ptid_t ptid)
+class aarch64_linux_nat_target final : public linux_nat_target
{
- int tid = ptid_get_lwp (ptid);
-
- if (0 == tid)
- tid = ptid_get_pid (ptid);
- return tid;
-}
-
-/* Macro definitions, data structures, and code for the hardware
- breakpoint and hardware watchpoint support follow. We use the
- following abbreviations throughout the code:
-
- hw - hardware
- bp - breakpoint
- wp - watchpoint */
-
-/* Maximum number of hardware breakpoint and watchpoint registers.
- Neither of these values may exceed the width of dr_changed_t
- measured in bits. */
-
-#define AARCH64_HBP_MAX_NUM 16
-#define AARCH64_HWP_MAX_NUM 16
-
-/* Alignment requirement in bytes for addresses written to
- hardware breakpoint and watchpoint value registers.
-
- A ptrace call attempting to set an address that does not meet the
- alignment criteria will fail. Limited support has been provided in
- this port for unaligned watchpoints, such that from a GDB user
- perspective, an unaligned watchpoint may be requested.
-
- This is achieved by minimally enlarging the watched area to meet the
- alignment requirement, and if necessary, splitting the watchpoint
- over several hardware watchpoint registers. */
-
-#define AARCH64_HBP_ALIGNMENT 4
-#define AARCH64_HWP_ALIGNMENT 8
-
-/* The maximum length of a memory region that can be watched by one
- hardware watchpoint register. */
-
-#define AARCH64_HWP_MAX_LEN_PER_REG 8
-
-/* ptrace hardware breakpoint resource info is formatted as follows:
-
- 31 24 16 8 0
- +---------------+--------------+---------------+---------------+
- | RESERVED | RESERVED | DEBUG_ARCH | NUM_SLOTS |
- +---------------+--------------+---------------+---------------+ */
-
-
-/* Macros to extract fields from the hardware debug information word. */
-#define AARCH64_DEBUG_NUM_SLOTS(x) ((x) & 0xff)
-#define AARCH64_DEBUG_ARCH(x) (((x) >> 8) & 0xff)
-
-/* Macro for the expected version of the ARMv8-A debug architecture. */
-#define AARCH64_DEBUG_ARCH_V8 0x6
-
-/* Number of hardware breakpoints/watchpoints the target supports.
- They are initialized with values obtained via the ptrace calls
- with NT_ARM_HW_BREAK and NT_ARM_HW_WATCH respectively. */
-
-static int aarch64_num_bp_regs;
-static int aarch64_num_wp_regs;
-
-/* Debugging of hardware breakpoint/watchpoint support. */
-
-static int debug_hw_points;
-
-/* Each bit of a variable of this type is used to indicate whether a
- hardware breakpoint or watchpoint setting has been changed since
- the last update.
-
- Bit N corresponds to the Nth hardware breakpoint or watchpoint
- setting which is managed in aarch64_debug_reg_state, where N is
- valid between 0 and the total number of the hardware breakpoint or
- watchpoint debug registers minus 1.
-
- When bit N is 1, the corresponding breakpoint or watchpoint setting
- has changed, and therefore the corresponding hardware debug
- register needs to be updated via the ptrace interface.
-
- In the per-thread arch-specific data area, we define two such
- variables for per-thread hardware breakpoint and watchpoint
- settings respectively.
-
- This type is part of the mechanism which helps reduce the number of
- ptrace calls to the kernel, i.e. avoid asking the kernel to write
- to the debug registers with unchanged values. */
-
-typedef unsigned LONGEST dr_changed_t;
-
-/* Set each of the lower M bits of X to 1; assert X is wide enough. */
-
-#define DR_MARK_ALL_CHANGED(x, m) \
- do \
- { \
- gdb_assert (sizeof ((x)) * 8 >= (m)); \
- (x) = (((dr_changed_t)1 << (m)) - 1); \
- } while (0)
+public:
+ /* Add our register access methods. */
+ void fetch_registers (struct regcache *, int) override;
+ void store_registers (struct regcache *, int) override;
+
+ const struct target_desc *read_description () override;
+
+ /* Add our hardware breakpoint and watchpoint implementation. */
+ int can_use_hw_breakpoint (enum bptype, int, int) override;
+ int insert_hw_breakpoint (struct gdbarch *, struct bp_target_info *) override;
+ int remove_hw_breakpoint (struct gdbarch *, struct bp_target_info *) override;
+ int region_ok_for_hw_watchpoint (CORE_ADDR, int) override;
+ int insert_watchpoint (CORE_ADDR, int, enum target_hw_bp_type,
+ struct expression *) override;
+ int remove_watchpoint (CORE_ADDR, int, enum target_hw_bp_type,
+ struct expression *) override;
+ bool stopped_by_watchpoint () override;
+ bool stopped_data_address (CORE_ADDR *) override;
+ bool watchpoint_addr_within_range (CORE_ADDR, CORE_ADDR, int) override;
+
+ int can_do_single_step () override;
-#define DR_MARK_N_CHANGED(x, n) \
- do \
- { \
- (x) |= ((dr_changed_t)1 << (n)); \
- } while (0)
+ /* Override the GNU/Linux inferior startup hook. */
+ void post_startup_inferior (ptid_t) override;
-#define DR_CLEAR_CHANGED(x) \
- do \
- { \
- (x) = 0; \
- } while (0)
+ /* Override the GNU/Linux post attach hook. */
+ void post_attach (int pid) override;
-#define DR_HAS_CHANGED(x) ((x) != 0)
-#define DR_N_HAS_CHANGED(x, n) ((x) & ((dr_changed_t)1 << (n)))
+ /* These three defer to common nat/ code. */
+ void low_new_thread (struct lwp_info *lp) override
+ { aarch64_linux_new_thread (lp); }
+ void low_delete_thread (struct arch_lwp_info *lp) override
+ { aarch64_linux_delete_thread (lp); }
+ void low_prepare_to_resume (struct lwp_info *lp) override
+ { aarch64_linux_prepare_to_resume (lp); }
-/* Structure for managing the hardware breakpoint/watchpoint resources.
- DR_ADDR_* stores the address, DR_CTRL_* stores the control register
- content, and DR_REF_COUNT_* counts the numbers of references to the
- corresponding bp/wp, by which way the limited hardware resources
- are not wasted on duplicated bp/wp settings (though so far gdb has
- done a good job by not sending duplicated bp/wp requests). */
+ void low_new_fork (struct lwp_info *parent, pid_t child_pid) override;
+ void low_forget_process (pid_t pid) override;
-struct aarch64_debug_reg_state
-{
- /* hardware breakpoint */
- CORE_ADDR dr_addr_bp[AARCH64_HBP_MAX_NUM];
- unsigned int dr_ctrl_bp[AARCH64_HBP_MAX_NUM];
- unsigned int dr_ref_count_bp[AARCH64_HBP_MAX_NUM];
-
- /* hardware watchpoint */
- CORE_ADDR dr_addr_wp[AARCH64_HWP_MAX_NUM];
- unsigned int dr_ctrl_wp[AARCH64_HWP_MAX_NUM];
- unsigned int dr_ref_count_wp[AARCH64_HWP_MAX_NUM];
+ /* Add our siginfo layout converter. */
+ bool low_siginfo_fixup (siginfo_t *ptrace, gdb_byte *inf, int direction)
+ override;
};
+static aarch64_linux_nat_target the_aarch64_linux_nat_target;
+
/* Per-process data. We don't bind this to a per-inferior registry
because of targets like x86 GNU/Linux that need to keep track of
processes that aren't bound to any inferior (e.g., fork children,
{
struct aarch64_process_info *proc;
- proc = xcalloc (1, sizeof (*proc));
+ proc = XCNEW (struct aarch64_process_info);
proc->pid = pid;
proc->next = aarch64_process_list;
/* Called whenever GDB is no longer debugging process PID. It deletes
data structures that keep track of debug register state. */
-static void
-aarch64_forget_process (pid_t pid)
+void
+aarch64_linux_nat_target::low_forget_process (pid_t pid)
{
struct aarch64_process_info *proc, **proc_link;
/* Get debug registers state for process PID. */
-static struct aarch64_debug_reg_state *
+struct aarch64_debug_reg_state *
aarch64_get_debug_reg_state (pid_t pid)
{
return &aarch64_process_info_get (pid)->state;
}
-/* Per-thread arch-specific data we want to keep. */
-
-struct arch_lwp_info
-{
- /* When bit N is 1, it indicates the Nth hardware breakpoint or
- watchpoint register pair needs to be updated when the thread is
- resumed; see aarch64_linux_prepare_to_resume. */
- dr_changed_t dr_changed_bp;
- dr_changed_t dr_changed_wp;
-};
-
-/* Call ptrace to set the thread TID's hardware breakpoint/watchpoint
- registers with data from *STATE. */
-
-static void
-aarch64_linux_set_debug_regs (const struct aarch64_debug_reg_state *state,
- int tid, int watchpoint)
-{
- int i, count;
- struct iovec iov;
- struct user_hwdebug_state regs;
- const CORE_ADDR *addr;
- const unsigned int *ctrl;
-
- memset (®s, 0, sizeof (regs));
- iov.iov_base = ®s;
- count = watchpoint ? aarch64_num_wp_regs : aarch64_num_bp_regs;
- addr = watchpoint ? state->dr_addr_wp : state->dr_addr_bp;
- ctrl = watchpoint ? state->dr_ctrl_wp : state->dr_ctrl_bp;
- if (count == 0)
- return;
- iov.iov_len = (offsetof (struct user_hwdebug_state, dbg_regs[count - 1])
- + sizeof (regs.dbg_regs [count - 1]));
-
- for (i = 0; i < count; i++)
- {
- regs.dbg_regs[i].addr = addr[i];
- regs.dbg_regs[i].ctrl = ctrl[i];
- }
-
- if (ptrace (PTRACE_SETREGSET, tid,
- watchpoint ? NT_ARM_HW_WATCH : NT_ARM_HW_BREAK,
- (void *) &iov))
- error (_("Unexpected error setting hardware debug registers"));
-}
-
-struct aarch64_dr_update_callback_param
-{
- int is_watchpoint;
- unsigned int idx;
-};
-
-/* Callback for iterate_over_lwps. Records the
- information about the change of one hardware breakpoint/watchpoint
- setting for the thread LWP.
- The information is passed in via PTR.
- N.B. The actual updating of hardware debug registers is not
- carried out until the moment the thread is resumed. */
-
-static int
-debug_reg_change_callback (struct lwp_info *lwp, void *ptr)
-{
- struct aarch64_dr_update_callback_param *param_p
- = (struct aarch64_dr_update_callback_param *) ptr;
- int pid = get_thread_id (lwp->ptid);
- int idx = param_p->idx;
- int is_watchpoint = param_p->is_watchpoint;
- struct arch_lwp_info *info = lwp->arch_private;
- dr_changed_t *dr_changed_ptr;
- dr_changed_t dr_changed;
-
- if (info == NULL)
- info = lwp->arch_private = XCNEW (struct arch_lwp_info);
-
- if (debug_hw_points)
- {
- fprintf_unfiltered (gdb_stdlog,
- "debug_reg_change_callback: \n\tOn entry:\n");
- fprintf_unfiltered (gdb_stdlog,
- "\tpid%d, dr_changed_bp=0x%s, "
- "dr_changed_wp=0x%s\n",
- pid, phex (info->dr_changed_bp, 8),
- phex (info->dr_changed_wp, 8));
- }
-
- dr_changed_ptr = is_watchpoint ? &info->dr_changed_wp
- : &info->dr_changed_bp;
- dr_changed = *dr_changed_ptr;
-
- gdb_assert (idx >= 0
- && (idx <= (is_watchpoint ? aarch64_num_wp_regs
- : aarch64_num_bp_regs)));
-
- /* The actual update is done later just before resuming the lwp,
- we just mark that one register pair needs updating. */
- DR_MARK_N_CHANGED (dr_changed, idx);
- *dr_changed_ptr = dr_changed;
-
- /* If the lwp isn't stopped, force it to momentarily pause, so
- we can update its debug registers. */
- if (!lwp->stopped)
- linux_stop_lwp (lwp);
-
- if (debug_hw_points)
- {
- fprintf_unfiltered (gdb_stdlog,
- "\tOn exit:\n\tpid%d, dr_changed_bp=0x%s, "
- "dr_changed_wp=0x%s\n",
- pid, phex (info->dr_changed_bp, 8),
- phex (info->dr_changed_wp, 8));
- }
-
- /* Continue the iteration. */
- return 0;
-}
-
-/* Notify each thread that their IDXth breakpoint/watchpoint register
- pair needs to be updated. The message will be recorded in each
- thread's arch-specific data area, the actual updating will be done
- when the thread is resumed. */
-
-static void
-aarch64_notify_debug_reg_change (const struct aarch64_debug_reg_state *state,
- int is_watchpoint, unsigned int idx)
-{
- struct aarch64_dr_update_callback_param param;
- ptid_t pid_ptid = pid_to_ptid (ptid_get_pid (inferior_ptid));
-
- param.is_watchpoint = is_watchpoint;
- param.idx = idx;
-
- iterate_over_lwps (pid_ptid, debug_reg_change_callback, (void *) ¶m);
-}
-
-/* Print the values of the cached breakpoint/watchpoint registers. */
-
-static void
-aarch64_show_debug_reg_state (struct aarch64_debug_reg_state *state,
- const char *func, CORE_ADDR addr,
- int len, int type)
-{
- int i;
-
- fprintf_unfiltered (gdb_stdlog, "%s", func);
- if (addr || len)
- fprintf_unfiltered (gdb_stdlog, " (addr=0x%08lx, len=%d, type=%s)",
- (unsigned long) addr, len,
- type == hw_write ? "hw-write-watchpoint"
- : (type == hw_read ? "hw-read-watchpoint"
- : (type == hw_access ? "hw-access-watchpoint"
- : (type == hw_execute ? "hw-breakpoint"
- : "??unknown??"))));
- fprintf_unfiltered (gdb_stdlog, ":\n");
-
- fprintf_unfiltered (gdb_stdlog, "\tBREAKPOINTs:\n");
- for (i = 0; i < aarch64_num_bp_regs; i++)
- fprintf_unfiltered (gdb_stdlog,
- "\tBP%d: addr=0x%08lx, ctrl=0x%08x, ref.count=%d\n",
- i, state->dr_addr_bp[i],
- state->dr_ctrl_bp[i], state->dr_ref_count_bp[i]);
-
- fprintf_unfiltered (gdb_stdlog, "\tWATCHPOINTs:\n");
- for (i = 0; i < aarch64_num_wp_regs; i++)
- fprintf_unfiltered (gdb_stdlog,
- "\tWP%d: addr=0x%08lx, ctrl=0x%08x, ref.count=%d\n",
- i, state->dr_addr_wp[i],
- state->dr_ctrl_wp[i], state->dr_ref_count_wp[i]);
-}
-
/* Fill GDB's register array with the general-purpose register values
from the current thread. */
static void
fetch_gregs_from_thread (struct regcache *regcache)
{
- int ret, regno, tid;
+ int ret, tid;
+ struct gdbarch *gdbarch = regcache->arch ();
elf_gregset_t regs;
struct iovec iovec;
- tid = get_thread_id (inferior_ptid);
+ /* Make sure REGS can hold all registers contents on both aarch64
+ and arm. */
+ gdb_static_assert (sizeof (regs) >= 18 * 4);
+
+ tid = regcache->ptid ().lwp ();
iovec.iov_base = ®s;
- iovec.iov_len = sizeof (regs);
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ iovec.iov_len = 18 * 4;
+ else
+ iovec.iov_len = sizeof (regs);
ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch general registers."));
- for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++)
- regcache_raw_supply (regcache, regno,
- (char *) ®s[regno - AARCH64_X0_REGNUM]);
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ aarch32_gp_regcache_supply (regcache, (uint32_t *) regs, 1);
+ else
+ {
+ int regno;
+
+ for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++)
+ regcache->raw_supply (regno, ®s[regno - AARCH64_X0_REGNUM]);
+ }
}
/* Store to the current thread the valid general-purpose register
static void
store_gregs_to_thread (const struct regcache *regcache)
{
- int ret, regno, tid;
+ int ret, tid;
elf_gregset_t regs;
struct iovec iovec;
+ struct gdbarch *gdbarch = regcache->arch ();
- tid = get_thread_id (inferior_ptid);
+ /* Make sure REGS can hold all registers contents on both aarch64
+ and arm. */
+ gdb_static_assert (sizeof (regs) >= 18 * 4);
+ tid = regcache->ptid ().lwp ();
iovec.iov_base = ®s;
- iovec.iov_len = sizeof (regs);
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ iovec.iov_len = 18 * 4;
+ else
+ iovec.iov_len = sizeof (regs);
ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch general registers."));
- for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++)
- if (REG_VALID == regcache_register_status (regcache, regno))
- regcache_raw_collect (regcache, regno,
- (char *) ®s[regno - AARCH64_X0_REGNUM]);
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ aarch32_gp_regcache_collect (regcache, (uint32_t *) regs, 1);
+ else
+ {
+ int regno;
+
+ for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++)
+ if (REG_VALID == regcache->get_register_status (regno))
+ regcache->raw_collect (regno, ®s[regno - AARCH64_X0_REGNUM]);
+ }
ret = ptrace (PTRACE_SETREGSET, tid, NT_PRSTATUS, &iovec);
if (ret < 0)
static void
fetch_fpregs_from_thread (struct regcache *regcache)
{
- int ret, regno, tid;
+ int ret, tid;
elf_fpregset_t regs;
struct iovec iovec;
+ struct gdbarch *gdbarch = regcache->arch ();
+
+ /* Make sure REGS can hold all VFP registers contents on both aarch64
+ and arm. */
+ gdb_static_assert (sizeof regs >= VFP_REGS_SIZE);
- tid = get_thread_id (inferior_ptid);
+ tid = regcache->ptid ().lwp ();
iovec.iov_base = ®s;
- iovec.iov_len = sizeof (regs);
- ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec);
- if (ret < 0)
- perror_with_name (_("Unable to fetch FP/SIMD registers."));
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ {
+ iovec.iov_len = VFP_REGS_SIZE;
- for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++)
- regcache_raw_supply (regcache, regno,
- (char *) ®s.vregs[regno - AARCH64_V0_REGNUM]);
+ ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec);
+ if (ret < 0)
+ perror_with_name (_("Unable to fetch VFP registers."));
- regcache_raw_supply (regcache, AARCH64_FPSR_REGNUM, (char *) ®s.fpsr);
- regcache_raw_supply (regcache, AARCH64_FPCR_REGNUM, (char *) ®s.fpcr);
+ aarch32_vfp_regcache_supply (regcache, (gdb_byte *) ®s, 32);
+ }
+ else
+ {
+ int regno;
+
+ iovec.iov_len = sizeof (regs);
+
+ ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec);
+ if (ret < 0)
+ perror_with_name (_("Unable to fetch vFP/SIMD registers."));
+
+ for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++)
+ regcache->raw_supply (regno, ®s.vregs[regno - AARCH64_V0_REGNUM]);
+
+ regcache->raw_supply (AARCH64_FPSR_REGNUM, ®s.fpsr);
+ regcache->raw_supply (AARCH64_FPCR_REGNUM, ®s.fpcr);
+ }
}
/* Store to the current thread the valid fp/simd register
static void
store_fpregs_to_thread (const struct regcache *regcache)
{
- int ret, regno, tid;
+ int ret, tid;
elf_fpregset_t regs;
struct iovec iovec;
+ struct gdbarch *gdbarch = regcache->arch ();
- tid = get_thread_id (inferior_ptid);
+ /* Make sure REGS can hold all VFP registers contents on both aarch64
+ and arm. */
+ gdb_static_assert (sizeof regs >= VFP_REGS_SIZE);
+ tid = regcache->ptid ().lwp ();
iovec.iov_base = ®s;
- iovec.iov_len = sizeof (regs);
- ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec);
- if (ret < 0)
- perror_with_name (_("Unable to fetch FP/SIMD registers."));
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ {
+ iovec.iov_len = VFP_REGS_SIZE;
+
+ ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec);
+ if (ret < 0)
+ perror_with_name (_("Unable to fetch VFP registers."));
+
+ aarch32_vfp_regcache_collect (regcache, (gdb_byte *) ®s, 32);
+ }
+ else
+ {
+ int regno;
+
+ iovec.iov_len = sizeof (regs);
+
+ ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec);
+ if (ret < 0)
+ perror_with_name (_("Unable to fetch FP/SIMD registers."));
+
+ for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++)
+ if (REG_VALID == regcache->get_register_status (regno))
+ regcache->raw_collect
+ (regno, (char *) ®s.vregs[regno - AARCH64_V0_REGNUM]);
+
+ if (REG_VALID == regcache->get_register_status (AARCH64_FPSR_REGNUM))
+ regcache->raw_collect (AARCH64_FPSR_REGNUM, (char *) ®s.fpsr);
+ if (REG_VALID == regcache->get_register_status (AARCH64_FPCR_REGNUM))
+ regcache->raw_collect (AARCH64_FPCR_REGNUM, (char *) ®s.fpcr);
+ }
+
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
+ {
+ ret = ptrace (PTRACE_SETREGSET, tid, NT_ARM_VFP, &iovec);
+ if (ret < 0)
+ perror_with_name (_("Unable to store VFP registers."));
+ }
+ else
+ {
+ ret = ptrace (PTRACE_SETREGSET, tid, NT_FPREGSET, &iovec);
+ if (ret < 0)
+ perror_with_name (_("Unable to store FP/SIMD registers."));
+ }
+}
+
+/* Fill GDB's register array with the sve register values
+ from the current thread. */
+
+static void
+fetch_sveregs_from_thread (struct regcache *regcache)
+{
+ std::unique_ptr<gdb_byte[]> base
+ = aarch64_sve_get_sveregs (regcache->ptid ().lwp ());
+ aarch64_sve_regs_copy_to_reg_buf (regcache, base.get ());
+}
- for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++)
- if (REG_VALID == regcache_register_status (regcache, regno))
- regcache_raw_collect (regcache, regno,
- (char *) ®s.vregs[regno - AARCH64_V0_REGNUM]);
+/* Store to the current thread the valid sve register
+ values in the GDB's register array. */
+
+static void
+store_sveregs_to_thread (struct regcache *regcache)
+{
+ int ret;
+ struct iovec iovec;
+ int tid = regcache->ptid ().lwp ();
- if (REG_VALID == regcache_register_status (regcache, AARCH64_FPSR_REGNUM))
- regcache_raw_collect (regcache, AARCH64_FPSR_REGNUM, (char *) ®s.fpsr);
- if (REG_VALID == regcache_register_status (regcache, AARCH64_FPCR_REGNUM))
- regcache_raw_collect (regcache, AARCH64_FPCR_REGNUM, (char *) ®s.fpcr);
+ /* Obtain a dump of SVE registers from ptrace. */
+ std::unique_ptr<gdb_byte[]> base = aarch64_sve_get_sveregs (tid);
+
+ /* Overwrite with regcache state. */
+ aarch64_sve_regs_copy_from_reg_buf (regcache, base.get ());
+
+ /* Write back to the kernel. */
+ iovec.iov_base = base.get ();
+ iovec.iov_len = ((struct user_sve_header *) base.get ())->size;
+ ret = ptrace (PTRACE_SETREGSET, tid, NT_ARM_SVE, &iovec);
- ret = ptrace (PTRACE_SETREGSET, tid, NT_FPREGSET, &iovec);
if (ret < 0)
- perror_with_name (_("Unable to store FP/SIMD registers."));
+ perror_with_name (_("Unable to store sve registers"));
}
-/* Implement the "to_fetch_register" target_ops method. */
+/* Fill GDB's register array with the pointer authentication mask values from
+ the current thread. */
static void
-aarch64_linux_fetch_inferior_registers (struct target_ops *ops,
- struct regcache *regcache,
- int regno)
+fetch_pauth_masks_from_thread (struct regcache *regcache)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (regcache->arch ());
+ int ret;
+ struct iovec iovec;
+ uint64_t pauth_regset[2] = {0, 0};
+ int tid = regcache->ptid ().lwp ();
+
+ iovec.iov_base = &pauth_regset;
+ iovec.iov_len = sizeof (pauth_regset);
+
+ ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_PAC_MASK, &iovec);
+ if (ret != 0)
+ perror_with_name (_("unable to fetch pauth registers."));
+
+ regcache->raw_supply (AARCH64_PAUTH_DMASK_REGNUM (tdep->pauth_reg_base),
+ &pauth_regset[0]);
+ regcache->raw_supply (AARCH64_PAUTH_CMASK_REGNUM (tdep->pauth_reg_base),
+ &pauth_regset[1]);
+}
+
+/* Implement the "fetch_registers" target_ops method. */
+
+void
+aarch64_linux_nat_target::fetch_registers (struct regcache *regcache,
+ int regno)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (regcache->arch ());
+
if (regno == -1)
{
fetch_gregs_from_thread (regcache);
- fetch_fpregs_from_thread (regcache);
+ if (tdep->has_sve ())
+ fetch_sveregs_from_thread (regcache);
+ else
+ fetch_fpregs_from_thread (regcache);
+
+ if (tdep->has_pauth ())
+ fetch_pauth_masks_from_thread (regcache);
}
else if (regno < AARCH64_V0_REGNUM)
fetch_gregs_from_thread (regcache);
+ else if (tdep->has_sve ())
+ fetch_sveregs_from_thread (regcache);
else
fetch_fpregs_from_thread (regcache);
+
+ if (tdep->has_pauth ())
+ {
+ if (regno == AARCH64_PAUTH_DMASK_REGNUM (tdep->pauth_reg_base)
+ || regno == AARCH64_PAUTH_CMASK_REGNUM (tdep->pauth_reg_base))
+ fetch_pauth_masks_from_thread (regcache);
+ }
}
-/* Implement the "to_store_register" target_ops method. */
+/* Implement the "store_registers" target_ops method. */
-static void
-aarch64_linux_store_inferior_registers (struct target_ops *ops,
- struct regcache *regcache,
- int regno)
+void
+aarch64_linux_nat_target::store_registers (struct regcache *regcache,
+ int regno)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (regcache->arch ());
+
if (regno == -1)
{
store_gregs_to_thread (regcache);
- store_fpregs_to_thread (regcache);
+ if (tdep->has_sve ())
+ store_sveregs_to_thread (regcache);
+ else
+ store_fpregs_to_thread (regcache);
}
else if (regno < AARCH64_V0_REGNUM)
store_gregs_to_thread (regcache);
+ else if (tdep->has_sve ())
+ store_sveregs_to_thread (regcache);
else
store_fpregs_to_thread (regcache);
}
fill_gregset (const struct regcache *regcache,
gdb_gregset_t *gregsetp, int regno)
{
- gdb_byte *gregs_buf = (gdb_byte *) gregsetp;
- int i;
-
- for (i = AARCH64_X0_REGNUM; i <= AARCH64_CPSR_REGNUM; i++)
- if (regno == -1 || regno == i)
- regcache_raw_collect (regcache, i,
- gregs_buf + X_REGISTER_SIZE
- * (i - AARCH64_X0_REGNUM));
+ regcache_collect_regset (&aarch64_linux_gregset, regcache,
+ regno, (gdb_byte *) gregsetp,
+ AARCH64_LINUX_SIZEOF_GREGSET);
}
/* Fill GDB's register array with the general-purpose register values
void
supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp)
{
- aarch64_linux_supply_gregset (regcache, (const gdb_byte *) gregsetp);
+ regcache_supply_regset (&aarch64_linux_gregset, regcache, -1,
+ (const gdb_byte *) gregsetp,
+ AARCH64_LINUX_SIZEOF_GREGSET);
}
/* Fill register REGNO (if it is a floating-point register) in
fill_fpregset (const struct regcache *regcache,
gdb_fpregset_t *fpregsetp, int regno)
{
- gdb_byte *fpregs_buf = (gdb_byte *) fpregsetp;
- int i;
-
- for (i = AARCH64_V0_REGNUM; i <= AARCH64_V31_REGNUM; i++)
- if (regno == -1 || regno == i)
- regcache_raw_collect (regcache, i,
- fpregs_buf + V_REGISTER_SIZE
- * (i - AARCH64_V0_REGNUM));
-
- if (regno == -1 || regno == AARCH64_FPSR_REGNUM)
- regcache_raw_collect (regcache, AARCH64_FPSR_REGNUM,
- fpregs_buf + V_REGISTER_SIZE * 32);
-
- if (regno == -1 || regno == AARCH64_FPCR_REGNUM)
- regcache_raw_collect (regcache, AARCH64_FPCR_REGNUM,
- fpregs_buf + V_REGISTER_SIZE * 32 + 4);
+ regcache_collect_regset (&aarch64_linux_fpregset, regcache,
+ regno, (gdb_byte *) fpregsetp,
+ AARCH64_LINUX_SIZEOF_FPREGSET);
}
/* Fill GDB's register array with the floating-point register values
void
supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp)
{
- aarch64_linux_supply_fpregset (regcache, (const gdb_byte *) fpregsetp);
-}
-
-/* Called when resuming a thread.
- The hardware debug registers are updated when there is any change. */
-
-static void
-aarch64_linux_prepare_to_resume (struct lwp_info *lwp)
-{
- struct arch_lwp_info *info = lwp->arch_private;
-
- /* NULL means this is the main thread still going through the shell,
- or, no watchpoint has been set yet. In that case, there's
- nothing to do. */
- if (info == NULL)
- return;
-
- if (DR_HAS_CHANGED (info->dr_changed_bp)
- || DR_HAS_CHANGED (info->dr_changed_wp))
- {
- int tid = ptid_get_lwp (lwp->ptid);
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (lwp->ptid));
-
- if (debug_hw_points)
- fprintf_unfiltered (gdb_stdlog, "prepare_to_resume thread %d\n", tid);
-
- /* Watchpoints. */
- if (DR_HAS_CHANGED (info->dr_changed_wp))
- {
- aarch64_linux_set_debug_regs (state, tid, 1);
- DR_CLEAR_CHANGED (info->dr_changed_wp);
- }
-
- /* Breakpoints. */
- if (DR_HAS_CHANGED (info->dr_changed_bp))
- {
- aarch64_linux_set_debug_regs (state, tid, 0);
- DR_CLEAR_CHANGED (info->dr_changed_bp);
- }
- }
-}
-
-static void
-aarch64_linux_new_thread (struct lwp_info *lp)
-{
- struct arch_lwp_info *info = XCNEW (struct arch_lwp_info);
-
- /* Mark that all the hardware breakpoint/watchpoint register pairs
- for this thread need to be initialized. */
- DR_MARK_ALL_CHANGED (info->dr_changed_bp, aarch64_num_bp_regs);
- DR_MARK_ALL_CHANGED (info->dr_changed_wp, aarch64_num_wp_regs);
-
- lp->arch_private = info;
+ regcache_supply_regset (&aarch64_linux_fpregset, regcache, -1,
+ (const gdb_byte *) fpregsetp,
+ AARCH64_LINUX_SIZEOF_FPREGSET);
}
/* linux_nat_new_fork hook. */
-static void
-aarch64_linux_new_fork (struct lwp_info *parent, pid_t child_pid)
+void
+aarch64_linux_nat_target::low_new_fork (struct lwp_info *parent,
+ pid_t child_pid)
{
pid_t parent_pid;
struct aarch64_debug_reg_state *parent_state;
new process so that all breakpoints and watchpoints can be
removed together. */
- parent_pid = ptid_get_pid (parent->ptid);
+ parent_pid = parent->ptid.pid ();
parent_state = aarch64_get_debug_reg_state (parent_pid);
child_state = aarch64_get_debug_reg_state (child_pid);
*child_state = *parent_state;
storage (or its descriptor). */
ps_err_e
-ps_get_thread_area (const struct ps_prochandle *ph,
+ps_get_thread_area (struct ps_prochandle *ph,
lwpid_t lwpid, int idx, void **base)
{
- struct iovec iovec;
- uint64_t reg;
-
- iovec.iov_base = ®
- iovec.iov_len = sizeof (reg);
+ int is_64bit_p
+ = (gdbarch_bfd_arch_info (target_gdbarch ())->bits_per_word == 64);
- if (ptrace (PTRACE_GETREGSET, lwpid, NT_ARM_TLS, &iovec) != 0)
- return PS_ERR;
-
- /* IDX is the bias from the thread pointer to the beginning of the
- thread descriptor. It has to be subtracted due to implementation
- quirks in libthread_db. */
- *base = (void *) (reg - idx);
-
- return PS_OK;
+ return aarch64_ps_get_thread_area (ph, lwpid, idx, base, is_64bit_p);
}
\f
-/* Get the hardware debug register capacity information. */
+/* Implement the "post_startup_inferior" target_ops method. */
-static void
-aarch64_linux_get_debug_reg_capacity (void)
+void
+aarch64_linux_nat_target::post_startup_inferior (ptid_t ptid)
{
- int tid;
- struct iovec iov;
- struct user_hwdebug_state dreg_state;
-
- tid = get_thread_id (inferior_ptid);
- iov.iov_base = &dreg_state;
- iov.iov_len = sizeof (dreg_state);
-
- /* Get hardware watchpoint register info. */
- if (ptrace (PTRACE_GETREGSET, tid, NT_ARM_HW_WATCH, &iov) == 0
- && AARCH64_DEBUG_ARCH (dreg_state.dbg_info) == AARCH64_DEBUG_ARCH_V8)
- {
- aarch64_num_wp_regs = AARCH64_DEBUG_NUM_SLOTS (dreg_state.dbg_info);
- if (aarch64_num_wp_regs > AARCH64_HWP_MAX_NUM)
- {
- warning (_("Unexpected number of hardware watchpoint registers"
- " reported by ptrace, got %d, expected %d."),
- aarch64_num_wp_regs, AARCH64_HWP_MAX_NUM);
- aarch64_num_wp_regs = AARCH64_HWP_MAX_NUM;
- }
- }
- else
- {
- warning (_("Unable to determine the number of hardware watchpoints"
- " available."));
- aarch64_num_wp_regs = 0;
- }
-
- /* Get hardware breakpoint register info. */
- if (ptrace (PTRACE_GETREGSET, tid, NT_ARM_HW_BREAK, &iov) == 0
- && AARCH64_DEBUG_ARCH (dreg_state.dbg_info) == AARCH64_DEBUG_ARCH_V8)
- {
- aarch64_num_bp_regs = AARCH64_DEBUG_NUM_SLOTS (dreg_state.dbg_info);
- if (aarch64_num_bp_regs > AARCH64_HBP_MAX_NUM)
- {
- warning (_("Unexpected number of hardware breakpoint registers"
- " reported by ptrace, got %d, expected %d."),
- aarch64_num_bp_regs, AARCH64_HBP_MAX_NUM);
- aarch64_num_bp_regs = AARCH64_HBP_MAX_NUM;
- }
- }
- else
- {
- warning (_("Unable to determine the number of hardware breakpoints"
- " available."));
- aarch64_num_bp_regs = 0;
- }
+ low_forget_process (ptid.pid ());
+ aarch64_linux_get_debug_reg_capacity (ptid.pid ());
+ linux_nat_target::post_startup_inferior (ptid);
}
-static void (*super_post_startup_inferior) (ptid_t ptid);
-
-/* Implement the "to_post_startup_inferior" target_ops method. */
+/* Implement the "post_attach" target_ops method. */
-static void
-aarch64_linux_child_post_startup_inferior (ptid_t ptid)
+void
+aarch64_linux_nat_target::post_attach (int pid)
{
- aarch64_forget_process (ptid_get_pid (ptid));
- aarch64_linux_get_debug_reg_capacity ();
- super_post_startup_inferior (ptid);
+ low_forget_process (pid);
+ /* Set the hardware debug register capacity. If
+ aarch64_linux_get_debug_reg_capacity is not called
+ (as it is in aarch64_linux_child_post_startup_inferior) then
+ software watchpoints will be used instead of hardware
+ watchpoints when attaching to a target. */
+ aarch64_linux_get_debug_reg_capacity (pid);
+ linux_nat_target::post_attach (pid);
}
-/* Implement the "to_read_description" target_ops method. */
+extern struct target_desc *tdesc_arm_with_neon;
-static const struct target_desc *
-aarch64_linux_read_description (struct target_ops *ops)
-{
- initialize_tdesc_aarch64 ();
- return tdesc_aarch64;
-}
+/* Implement the "read_description" target_ops method. */
-/* Given the (potentially unaligned) watchpoint address in ADDR and
- length in LEN, return the aligned address and aligned length in
- *ALIGNED_ADDR_P and *ALIGNED_LEN_P, respectively. The returned
- aligned address and length will be valid values to write to the
- hardware watchpoint value and control registers.
+const struct target_desc *
+aarch64_linux_nat_target::read_description ()
+{
+ int ret, tid;
+ gdb_byte regbuf[VFP_REGS_SIZE];
+ struct iovec iovec;
- The given watchpoint may get truncated if more than one hardware
- register is needed to cover the watched region. *NEXT_ADDR_P
- and *NEXT_LEN_P, if non-NULL, will return the address and length
- of the remaining part of the watchpoint (which can be processed
- by calling this routine again to generate another aligned address
- and length pair.
+ tid = inferior_ptid.lwp ();
- See the comment above the function of the same name in
- gdbserver/linux-aarch64-low.c for more information. */
+ iovec.iov_base = regbuf;
+ iovec.iov_len = VFP_REGS_SIZE;
-static void
-aarch64_align_watchpoint (CORE_ADDR addr, int len, CORE_ADDR *aligned_addr_p,
- int *aligned_len_p, CORE_ADDR *next_addr_p,
- int *next_len_p)
-{
- int aligned_len;
- unsigned int offset;
- CORE_ADDR aligned_addr;
- const unsigned int alignment = AARCH64_HWP_ALIGNMENT;
- const unsigned int max_wp_len = AARCH64_HWP_MAX_LEN_PER_REG;
+ ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec);
+ if (ret == 0)
+ return tdesc_arm_with_neon;
- /* As assumed by the algorithm. */
- gdb_assert (alignment == max_wp_len);
+ CORE_ADDR hwcap = linux_get_hwcap (this);
- if (len <= 0)
- return;
+ return aarch64_read_description (aarch64_sve_get_vq (tid),
+ hwcap & AARCH64_HWCAP_PACA);
+}
- /* Address to be put into the hardware watchpoint value register
- must be aligned. */
- offset = addr & (alignment - 1);
- aligned_addr = addr - offset;
+/* Convert a native/host siginfo object, into/from the siginfo in the
+ layout of the inferiors' architecture. Returns true if any
+ conversion was done; false otherwise. If DIRECTION is 1, then copy
+ from INF to NATIVE. If DIRECTION is 0, copy from NATIVE to
+ INF. */
- gdb_assert (offset >= 0 && offset < alignment);
- gdb_assert (aligned_addr >= 0 && aligned_addr <= addr);
- gdb_assert (offset + len > 0);
+bool
+aarch64_linux_nat_target::low_siginfo_fixup (siginfo_t *native, gdb_byte *inf,
+ int direction)
+{
+ struct gdbarch *gdbarch = get_frame_arch (get_current_frame ());
- if (offset + len >= max_wp_len)
+ /* Is the inferior 32-bit? If so, then do fixup the siginfo
+ object. */
+ if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
{
- /* Need more than one watchpoint registers; truncate it at the
- alignment boundary. */
- aligned_len = max_wp_len;
- len -= (max_wp_len - offset);
- addr += (max_wp_len - offset);
- gdb_assert ((addr & (alignment - 1)) == 0);
- }
- else
- {
- /* Find the smallest valid length that is large enough to
- accommodate this watchpoint. */
- static const unsigned char
- aligned_len_array[AARCH64_HWP_MAX_LEN_PER_REG] =
- { 1, 2, 4, 4, 8, 8, 8, 8 };
-
- aligned_len = aligned_len_array[offset + len - 1];
- addr += len;
- len = 0;
+ if (direction == 0)
+ aarch64_compat_siginfo_from_siginfo ((struct compat_siginfo *) inf,
+ native);
+ else
+ aarch64_siginfo_from_compat_siginfo (native,
+ (struct compat_siginfo *) inf);
+
+ return true;
}
- if (aligned_addr_p)
- *aligned_addr_p = aligned_addr;
- if (aligned_len_p)
- *aligned_len_p = aligned_len;
- if (next_addr_p)
- *next_addr_p = addr;
- if (next_len_p)
- *next_len_p = len;
+ return false;
}
/* Returns the number of hardware watchpoints of type TYPE that we can
bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
CNT is the number of such watchpoints used so far (including this
one). OTHERTYPE is non-zero if other types of watchpoints are
- currently enabled.
-
- We always return 1 here because we don't have enough information
- about possible overlap of addresses that they want to watch. As an
- extreme example, consider the case where all the watchpoints watch
- the same address and the same region length: then we can handle a
- virtually unlimited number of watchpoints, due to debug register
- sharing implemented via reference counts. */
-
-static int
-aarch64_linux_can_use_hw_breakpoint (struct target_ops *self,
- int type, int cnt, int othertype)
-{
- return 1;
-}
-
-/* ptrace expects control registers to be formatted as follows:
-
- 31 13 5 3 1 0
- +--------------------------------+----------+------+------+----+
- | RESERVED (SBZ) | LENGTH | TYPE | PRIV | EN |
- +--------------------------------+----------+------+------+----+
-
- The TYPE field is ignored for breakpoints. */
-
-#define DR_CONTROL_ENABLED(ctrl) (((ctrl) & 0x1) == 1)
-#define DR_CONTROL_LENGTH(ctrl) (((ctrl) >> 5) & 0xff)
-
-/* Utility function that returns the length in bytes of a watchpoint
- according to the content of a hardware debug control register CTRL.
- Note that the kernel currently only supports the following Byte
- Address Select (BAS) values: 0x1, 0x3, 0xf and 0xff, which means
- that for a hardware watchpoint, its valid length can only be 1
- byte, 2 bytes, 4 bytes or 8 bytes. */
-
-static inline unsigned int
-aarch64_watchpoint_length (unsigned int ctrl)
-{
- switch (DR_CONTROL_LENGTH (ctrl))
- {
- case 0x01:
- return 1;
- case 0x03:
- return 2;
- case 0x0f:
- return 4;
- case 0xff:
- return 8;
- default:
- return 0;
- }
-}
-
-/* Given the hardware breakpoint or watchpoint type TYPE and its
- length LEN, return the expected encoding for a hardware
- breakpoint/watchpoint control register. */
-
-static unsigned int
-aarch64_point_encode_ctrl_reg (int type, int len)
-{
- unsigned int ctrl, ttype;
-
- /* type */
- switch (type)
- {
- case hw_write:
- ttype = 2;
- break;
- case hw_read:
- ttype = 1;
- break;
- case hw_access:
- ttype = 3;
- break;
- case hw_execute:
- ttype = 0;
- break;
- default:
- perror_with_name (_("Unrecognized breakpoint/watchpoint type"));
- }
- ctrl = ttype << 3;
-
- /* length bitmask */
- ctrl |= ((1 << len) - 1) << 5;
- /* enabled at el0 */
- ctrl |= (2 << 1) | 1;
-
- return ctrl;
-}
-
-/* Addresses to be written to the hardware breakpoint and watchpoint
- value registers need to be aligned; the alignment is 4-byte and
- 8-type respectively. Linux kernel rejects any non-aligned address
- it receives from the related ptrace call. Furthermore, the kernel
- currently only supports the following Byte Address Select (BAS)
- values: 0x1, 0x3, 0xf and 0xff, which means that for a hardware
- watchpoint to be accepted by the kernel (via ptrace call), its
- valid length can only be 1 byte, 2 bytes, 4 bytes or 8 bytes.
- Despite these limitations, the unaligned watchpoint is supported in
- this port.
-
- Return 0 for any non-compliant ADDR and/or LEN; return 1 otherwise. */
-
-static int
-aarch64_point_is_aligned (int is_watchpoint, CORE_ADDR addr, int len)
-{
- unsigned int alignment = is_watchpoint ? AARCH64_HWP_ALIGNMENT
- : AARCH64_HBP_ALIGNMENT;
-
- if (addr & (alignment - 1))
- return 0;
-
- if (len != 8 && len != 4 && len != 2 && len != 1)
- return 0;
-
- return 1;
-}
-
-/* Record the insertion of one breakpoint/watchpoint, as represented
- by ADDR and CTRL, in the cached debug register state area *STATE. */
-
-static int
-aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
- int type, CORE_ADDR addr, int len)
-{
- int i, idx, num_regs, is_watchpoint;
- unsigned int ctrl, *dr_ctrl_p, *dr_ref_count;
- CORE_ADDR *dr_addr_p;
-
- /* Set up state pointers. */
- is_watchpoint = (type != hw_execute);
- gdb_assert (aarch64_point_is_aligned (is_watchpoint, addr, len));
- if (is_watchpoint)
- {
- num_regs = aarch64_num_wp_regs;
- dr_addr_p = state->dr_addr_wp;
- dr_ctrl_p = state->dr_ctrl_wp;
- dr_ref_count = state->dr_ref_count_wp;
- }
- else
- {
- num_regs = aarch64_num_bp_regs;
- dr_addr_p = state->dr_addr_bp;
- dr_ctrl_p = state->dr_ctrl_bp;
- dr_ref_count = state->dr_ref_count_bp;
- }
-
- ctrl = aarch64_point_encode_ctrl_reg (type, len);
-
- /* Find an existing or free register in our cache. */
- idx = -1;
- for (i = 0; i < num_regs; ++i)
- {
- if ((dr_ctrl_p[i] & 1) == 0)
- {
- gdb_assert (dr_ref_count[i] == 0);
- idx = i;
- /* no break; continue hunting for an existing one. */
- }
- else if (dr_addr_p[i] == addr && dr_ctrl_p[i] == ctrl)
- {
- gdb_assert (dr_ref_count[i] != 0);
- idx = i;
- break;
- }
- }
-
- /* No space. */
- if (idx == -1)
- return -1;
-
- /* Update our cache. */
- if ((dr_ctrl_p[idx] & 1) == 0)
- {
- /* new entry */
- dr_addr_p[idx] = addr;
- dr_ctrl_p[idx] = ctrl;
- dr_ref_count[idx] = 1;
- /* Notify the change. */
- aarch64_notify_debug_reg_change (state, is_watchpoint, idx);
- }
- else
- {
- /* existing entry */
- dr_ref_count[idx]++;
- }
-
- return 0;
-}
-
-/* Record the removal of one breakpoint/watchpoint, as represented by
- ADDR and CTRL, in the cached debug register state area *STATE. */
+ currently enabled. */
-static int
-aarch64_dr_state_remove_one_point (struct aarch64_debug_reg_state *state,
- int type, CORE_ADDR addr, int len)
+int
+aarch64_linux_nat_target::can_use_hw_breakpoint (enum bptype type,
+ int cnt, int othertype)
{
- int i, num_regs, is_watchpoint;
- unsigned int ctrl, *dr_ctrl_p, *dr_ref_count;
- CORE_ADDR *dr_addr_p;
-
- /* Set up state pointers. */
- is_watchpoint = (type != hw_execute);
- gdb_assert (aarch64_point_is_aligned (is_watchpoint, addr, len));
- if (is_watchpoint)
+ if (type == bp_hardware_watchpoint || type == bp_read_watchpoint
+ || type == bp_access_watchpoint || type == bp_watchpoint)
{
- num_regs = aarch64_num_wp_regs;
- dr_addr_p = state->dr_addr_wp;
- dr_ctrl_p = state->dr_ctrl_wp;
- dr_ref_count = state->dr_ref_count_wp;
+ if (aarch64_num_wp_regs == 0)
+ return 0;
}
- else
+ else if (type == bp_hardware_breakpoint)
{
- num_regs = aarch64_num_bp_regs;
- dr_addr_p = state->dr_addr_bp;
- dr_ctrl_p = state->dr_ctrl_bp;
- dr_ref_count = state->dr_ref_count_bp;
+ if (aarch64_num_bp_regs == 0)
+ return 0;
}
-
- ctrl = aarch64_point_encode_ctrl_reg (type, len);
-
- /* Find the entry that matches the ADDR and CTRL. */
- for (i = 0; i < num_regs; ++i)
- if (dr_addr_p[i] == addr && dr_ctrl_p[i] == ctrl)
- {
- gdb_assert (dr_ref_count[i] != 0);
- break;
- }
-
- /* Not found. */
- if (i == num_regs)
- return -1;
-
- /* Clear our cache. */
- if (--dr_ref_count[i] == 0)
- {
- /* Clear the enable bit. */
- ctrl &= ~1;
- dr_addr_p[i] = 0;
- dr_ctrl_p[i] = ctrl;
- /* Notify the change. */
- aarch64_notify_debug_reg_change (state, is_watchpoint, i);
- }
-
- return 0;
-}
-
-/* Implement insertion and removal of a single breakpoint. */
-
-static int
-aarch64_handle_breakpoint (int type, CORE_ADDR addr, int len, int is_insert)
-{
- struct aarch64_debug_reg_state *state;
-
- /* The hardware breakpoint on AArch64 should always be 4-byte
- aligned. */
- if (!aarch64_point_is_aligned (0 /* is_watchpoint */ , addr, len))
- return -1;
-
- state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- if (is_insert)
- return aarch64_dr_state_insert_one_point (state, type, addr, len);
else
- return aarch64_dr_state_remove_one_point (state, type, addr, len);
+ gdb_assert_not_reached ("unexpected breakpoint type");
+
+ /* We always return 1 here because we don't have enough information
+ about possible overlap of addresses that they want to watch. As an
+ extreme example, consider the case where all the watchpoints watch
+ the same address and the same region length: then we can handle a
+ virtually unlimited number of watchpoints, due to debug register
+ sharing implemented via reference counts. */
+ return 1;
}
-/* Insert a hardware-assisted breakpoint at BP_TGT->placed_address.
+/* Insert a hardware-assisted breakpoint at BP_TGT->reqstd_address.
Return 0 on success, -1 on failure. */
-static int
-aarch64_linux_insert_hw_breakpoint (struct target_ops *self,
- struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
+int
+aarch64_linux_nat_target::insert_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
int ret;
- CORE_ADDR addr = bp_tgt->placed_address;
- const int len = 4;
- const int type = hw_execute;
+ CORE_ADDR addr = bp_tgt->placed_address = bp_tgt->reqstd_address;
+ int len;
+ const enum target_hw_bp_type type = hw_execute;
+ struct aarch64_debug_reg_state *state
+ = aarch64_get_debug_reg_state (inferior_ptid.pid ());
+
+ gdbarch_breakpoint_from_pc (gdbarch, &addr, &len);
- if (debug_hw_points)
+ if (show_debug_regs)
fprintf_unfiltered
(gdb_stdlog,
"insert_hw_breakpoint on entry (addr=0x%08lx, len=%d))\n",
(unsigned long) addr, len);
- ret = aarch64_handle_breakpoint (type, addr, len, 1 /* is_insert */);
+ ret = aarch64_handle_breakpoint (type, addr, len, 1 /* is_insert */, state);
- if (debug_hw_points > 1)
+ if (show_debug_regs)
{
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
aarch64_show_debug_reg_state (state,
- "insert_hw_watchpoint", addr, len, type);
+ "insert_hw_breakpoint", addr, len, type);
}
return ret;
/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.
Return 0 on success, -1 on failure. */
-static int
-aarch64_linux_remove_hw_breakpoint (struct target_ops *self,
- struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
+int
+aarch64_linux_nat_target::remove_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
int ret;
CORE_ADDR addr = bp_tgt->placed_address;
- const int len = 4;
- const int type = hw_execute;
+ int len = 4;
+ const enum target_hw_bp_type type = hw_execute;
+ struct aarch64_debug_reg_state *state
+ = aarch64_get_debug_reg_state (inferior_ptid.pid ());
- if (debug_hw_points)
+ gdbarch_breakpoint_from_pc (gdbarch, &addr, &len);
+
+ if (show_debug_regs)
fprintf_unfiltered
(gdb_stdlog, "remove_hw_breakpoint on entry (addr=0x%08lx, len=%d))\n",
(unsigned long) addr, len);
- ret = aarch64_handle_breakpoint (type, addr, len, 0 /* is_insert */);
+ ret = aarch64_handle_breakpoint (type, addr, len, 0 /* is_insert */, state);
- if (debug_hw_points > 1)
+ if (show_debug_regs)
{
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
aarch64_show_debug_reg_state (state,
"remove_hw_watchpoint", addr, len, type);
}
return ret;
}
-/* This is essentially the same as aarch64_handle_breakpoint, apart
- from that it is an aligned watchpoint to be handled. */
-
-static int
-aarch64_handle_aligned_watchpoint (int type, CORE_ADDR addr, int len,
- int is_insert)
-{
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- if (is_insert)
- return aarch64_dr_state_insert_one_point (state, type, addr, len);
- else
- return aarch64_dr_state_remove_one_point (state, type, addr, len);
-}
-
-/* Insert/remove unaligned watchpoint by calling
- aarch64_align_watchpoint repeatedly until the whole watched region,
- as represented by ADDR and LEN, has been properly aligned and ready
- to be written to one or more hardware watchpoint registers.
- IS_INSERT indicates whether this is an insertion or a deletion.
- Return 0 if succeed. */
-
-static int
-aarch64_handle_unaligned_watchpoint (int type, CORE_ADDR addr, int len,
- int is_insert)
-{
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- while (len > 0)
- {
- CORE_ADDR aligned_addr;
- int aligned_len, ret;
-
- aarch64_align_watchpoint (addr, len, &aligned_addr, &aligned_len,
- &addr, &len);
-
- if (is_insert)
- ret = aarch64_dr_state_insert_one_point (state, type, aligned_addr,
- aligned_len);
- else
- ret = aarch64_dr_state_remove_one_point (state, type, aligned_addr,
- aligned_len);
-
- if (debug_hw_points)
- fprintf_unfiltered (gdb_stdlog,
-"handle_unaligned_watchpoint: is_insert: %d\n"
-" aligned_addr: 0x%08lx, aligned_len: %d\n"
-" next_addr: 0x%08lx, next_len: %d\n",
- is_insert, aligned_addr, aligned_len, addr, len);
-
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-
-/* Implements insertion and removal of a single watchpoint. */
-
-static int
-aarch64_handle_watchpoint (int type, CORE_ADDR addr, int len, int is_insert)
-{
- if (aarch64_point_is_aligned (1 /* is_watchpoint */ , addr, len))
- return aarch64_handle_aligned_watchpoint (type, addr, len, is_insert);
- else
- return aarch64_handle_unaligned_watchpoint (type, addr, len, is_insert);
-}
-
-/* Implement the "to_insert_watchpoint" target_ops method.
+/* Implement the "insert_watchpoint" target_ops method.
Insert a watchpoint to watch a memory region which starts at
address ADDR and whose length is LEN bytes. Watch memory accesses
of the type TYPE. Return 0 on success, -1 on failure. */
-static int
-aarch64_linux_insert_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, int type,
- struct expression *cond)
+int
+aarch64_linux_nat_target::insert_watchpoint (CORE_ADDR addr, int len,
+ enum target_hw_bp_type type,
+ struct expression *cond)
{
int ret;
+ struct aarch64_debug_reg_state *state
+ = aarch64_get_debug_reg_state (inferior_ptid.pid ());
- if (debug_hw_points)
+ if (show_debug_regs)
fprintf_unfiltered (gdb_stdlog,
"insert_watchpoint on entry (addr=0x%08lx, len=%d)\n",
(unsigned long) addr, len);
gdb_assert (type != hw_execute);
- ret = aarch64_handle_watchpoint (type, addr, len, 1 /* is_insert */);
+ ret = aarch64_handle_watchpoint (type, addr, len, 1 /* is_insert */, state);
- if (debug_hw_points > 1)
+ if (show_debug_regs)
{
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
aarch64_show_debug_reg_state (state,
"insert_watchpoint", addr, len, type);
}
return ret;
}
-/* Implement the "to_remove_watchpoint" target_ops method.
+/* Implement the "remove_watchpoint" target_ops method.
Remove a watchpoint that watched the memory region which starts at
address ADDR, whose length is LEN bytes, and for accesses of the
type TYPE. Return 0 on success, -1 on failure. */
-static int
-aarch64_linux_remove_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, int type,
- struct expression *cond)
+int
+aarch64_linux_nat_target::remove_watchpoint (CORE_ADDR addr, int len,
+ enum target_hw_bp_type type,
+ struct expression *cond)
{
int ret;
+ struct aarch64_debug_reg_state *state
+ = aarch64_get_debug_reg_state (inferior_ptid.pid ());
- if (debug_hw_points)
+ if (show_debug_regs)
fprintf_unfiltered (gdb_stdlog,
"remove_watchpoint on entry (addr=0x%08lx, len=%d)\n",
(unsigned long) addr, len);
gdb_assert (type != hw_execute);
- ret = aarch64_handle_watchpoint (type, addr, len, 0 /* is_insert */);
+ ret = aarch64_handle_watchpoint (type, addr, len, 0 /* is_insert */, state);
- if (debug_hw_points > 1)
+ if (show_debug_regs)
{
- struct aarch64_debug_reg_state *state
- = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
-
aarch64_show_debug_reg_state (state,
"remove_watchpoint", addr, len, type);
}
return ret;
}
-/* Implement the "to_region_ok_for_hw_watchpoint" target_ops method. */
+/* Implement the "region_ok_for_hw_watchpoint" target_ops method. */
-static int
-aarch64_linux_region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
+int
+aarch64_linux_nat_target::region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
{
- CORE_ADDR aligned_addr;
-
- /* Can not set watchpoints for zero or negative lengths. */
- if (len <= 0)
- return 0;
-
- /* Must have hardware watchpoint debug register(s). */
- if (aarch64_num_wp_regs == 0)
- return 0;
-
- /* We support unaligned watchpoint address and arbitrary length,
- as long as the size of the whole watched area after alignment
- doesn't exceed size of the total area that all watchpoint debug
- registers can watch cooperatively.
-
- This is a very relaxed rule, but unfortunately there are
- limitations, e.g. false-positive hits, due to limited support of
- hardware debug registers in the kernel. See comment above
- aarch64_align_watchpoint for more information. */
-
- aligned_addr = addr & ~(AARCH64_HWP_MAX_LEN_PER_REG - 1);
- if (aligned_addr + aarch64_num_wp_regs * AARCH64_HWP_MAX_LEN_PER_REG
- < addr + len)
- return 0;
-
- /* All tests passed so we are likely to be able to set the watchpoint.
- The reason that it is 'likely' rather than 'must' is because
- we don't check the current usage of the watchpoint registers, and
- there may not be enough registers available for this watchpoint.
- Ideally we should check the cached debug register state, however
- the checking is costly. */
- return 1;
+ return aarch64_linux_region_ok_for_watchpoint (addr, len);
}
-/* Implement the "to_stopped_data_address" target_ops method. */
+/* Implement the "stopped_data_address" target_ops method. */
-static int
-aarch64_linux_stopped_data_address (struct target_ops *target,
- CORE_ADDR *addr_p)
+bool
+aarch64_linux_nat_target::stopped_data_address (CORE_ADDR *addr_p)
{
siginfo_t siginfo;
- int i, tid;
+ int i;
struct aarch64_debug_reg_state *state;
if (!linux_nat_get_siginfo (inferior_ptid, &siginfo))
- return 0;
+ return false;
/* This must be a hardware breakpoint. */
if (siginfo.si_signo != SIGTRAP
|| (siginfo.si_code & 0xffff) != TRAP_HWBKPT)
- return 0;
+ return false;
/* Check if the address matches any watched address. */
- state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
+ state = aarch64_get_debug_reg_state (inferior_ptid.pid ());
for (i = aarch64_num_wp_regs - 1; i >= 0; --i)
{
+ const unsigned int offset
+ = aarch64_watchpoint_offset (state->dr_ctrl_wp[i]);
const unsigned int len = aarch64_watchpoint_length (state->dr_ctrl_wp[i]);
const CORE_ADDR addr_trap = (CORE_ADDR) siginfo.si_addr;
- const CORE_ADDR addr_watch = state->dr_addr_wp[i];
+ const CORE_ADDR addr_watch = state->dr_addr_wp[i] + offset;
+ const CORE_ADDR addr_watch_aligned = align_down (state->dr_addr_wp[i], 8);
+ const CORE_ADDR addr_orig = state->dr_addr_orig_wp[i];
if (state->dr_ref_count_wp[i]
&& DR_CONTROL_ENABLED (state->dr_ctrl_wp[i])
- && addr_trap >= addr_watch
+ && addr_trap >= addr_watch_aligned
&& addr_trap < addr_watch + len)
{
- *addr_p = addr_trap;
- return 1;
+ /* ADDR_TRAP reports the first address of the memory range
+ accessed by the CPU, regardless of what was the memory
+ range watched. Thus, a large CPU access that straddles
+ the ADDR_WATCH..ADDR_WATCH+LEN range may result in an
+ ADDR_TRAP that is lower than the
+ ADDR_WATCH..ADDR_WATCH+LEN range. E.g.:
+
+ addr: | 4 | 5 | 6 | 7 | 8 |
+ |---- range watched ----|
+ |----------- range accessed ------------|
+
+ In this case, ADDR_TRAP will be 4.
+
+ To match a watchpoint known to GDB core, we must never
+ report *ADDR_P outside of any ADDR_WATCH..ADDR_WATCH+LEN
+ range. ADDR_WATCH <= ADDR_TRAP < ADDR_ORIG is a false
+ positive on kernels older than 4.10. See PR
+ external/20207. */
+ *addr_p = addr_orig;
+ return true;
}
}
- return 0;
+ return false;
}
-/* Implement the "to_stopped_by_watchpoint" target_ops method. */
+/* Implement the "stopped_by_watchpoint" target_ops method. */
-static int
-aarch64_linux_stopped_by_watchpoint (struct target_ops *ops)
+bool
+aarch64_linux_nat_target::stopped_by_watchpoint ()
{
CORE_ADDR addr;
- return aarch64_linux_stopped_data_address (ops, &addr);
+ return stopped_data_address (&addr);
}
-/* Implement the "to_watchpoint_addr_within_range" target_ops method. */
+/* Implement the "watchpoint_addr_within_range" target_ops method. */
-static int
-aarch64_linux_watchpoint_addr_within_range (struct target_ops *target,
- CORE_ADDR addr,
- CORE_ADDR start, int length)
+bool
+aarch64_linux_nat_target::watchpoint_addr_within_range (CORE_ADDR addr,
+ CORE_ADDR start, int length)
{
return start <= addr && start + length - 1 >= addr;
}
+/* Implement the "can_do_single_step" target_ops method. */
+
+int
+aarch64_linux_nat_target::can_do_single_step ()
+{
+ return 1;
+}
+
/* Define AArch64 maintenance commands. */
static void
/* A maintenance command to enable printing the internal DRi mirror
variables. */
add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
- &debug_hw_points, _("\
+ &show_debug_regs, _("\
Set whether to show variables that mirror the AArch64 debug registers."), _("\
Show whether to show variables that mirror the AArch64 debug registers."), _("\
Use \"on\" to enable, \"off\" to disable.\n\
&maintenance_show_cmdlist);
}
-/* -Wmissing-prototypes. */
-void _initialize_aarch64_linux_nat (void);
-
void
_initialize_aarch64_linux_nat (void)
{
- struct target_ops *t;
-
- /* Fill in the generic GNU/Linux methods. */
- t = linux_target ();
-
add_show_debug_regs_command ();
- /* Add our register access methods. */
- t->to_fetch_registers = aarch64_linux_fetch_inferior_registers;
- t->to_store_registers = aarch64_linux_store_inferior_registers;
-
- t->to_read_description = aarch64_linux_read_description;
-
- t->to_can_use_hw_breakpoint = aarch64_linux_can_use_hw_breakpoint;
- t->to_insert_hw_breakpoint = aarch64_linux_insert_hw_breakpoint;
- t->to_remove_hw_breakpoint = aarch64_linux_remove_hw_breakpoint;
- t->to_region_ok_for_hw_watchpoint =
- aarch64_linux_region_ok_for_hw_watchpoint;
- t->to_insert_watchpoint = aarch64_linux_insert_watchpoint;
- t->to_remove_watchpoint = aarch64_linux_remove_watchpoint;
- t->to_stopped_by_watchpoint = aarch64_linux_stopped_by_watchpoint;
- t->to_stopped_data_address = aarch64_linux_stopped_data_address;
- t->to_watchpoint_addr_within_range =
- aarch64_linux_watchpoint_addr_within_range;
-
- /* Override the GNU/Linux inferior startup hook. */
- super_post_startup_inferior = t->to_post_startup_inferior;
- t->to_post_startup_inferior = aarch64_linux_child_post_startup_inferior;
-
/* Register the target. */
- linux_nat_add_target (t);
- linux_nat_set_new_thread (t, aarch64_linux_new_thread);
- linux_nat_set_new_fork (t, aarch64_linux_new_fork);
- linux_nat_set_forget_process (t, aarch64_forget_process);
- linux_nat_set_prepare_to_resume (t, aarch64_linux_prepare_to_resume);
+ linux_target = &the_aarch64_linux_nat_target;
+ add_inf_child_target (&the_aarch64_linux_nat_target);
}