/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+ Copyright (C) 1998-2015 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#if GDB_MULTI_ARCH
-#include "gdbcmd.h"
-#include "inferior.h" /* enum CALL_DUMMY_LOCATION et.al. */
-#else
-/* Just include everything in sight so that the every old definition
- of macro is visible. */
-#include "gdb_string.h"
-#include "symtab.h"
-#include "frame.h"
-#include "inferior.h"
-#include "breakpoint.h"
-#include "gdb_wait.h"
-#include "gdbcore.h"
+#include "arch-utils.h"
+#include "buildsym.h"
#include "gdbcmd.h"
-#include "target.h"
-#include "annotate.h"
-#endif
+#include "inferior.h" /* enum CALL_DUMMY_LOCATION et al. */
+#include "infrun.h"
#include "regcache.h"
-#include "gdb_assert.h"
+#include "sim-regno.h"
+#include "gdbcore.h"
+#include "osabi.h"
+#include "target-descriptions.h"
+#include "objfiles.h"
+#include "language.h"
+#include "symtab.h"
#include "version.h"
#include "floatformat.h"
-/* Use the program counter to determine the contents and size
- of a breakpoint instruction. If no target-dependent macro
- BREAKPOINT_FROM_PC has been defined to implement this function,
- assume that the breakpoint doesn't depend on the PC, and
- use the values of the BIG_BREAKPOINT and LITTLE_BREAKPOINT macros.
- Return a pointer to a string of bytes that encode a breakpoint
- instruction, stores the length of the string to *lenptr,
- and optionally adjust the pc to point to the correct memory location
- for inserting the breakpoint. */
-
-unsigned char *
-legacy_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
-{
- /* {BIG_,LITTLE_}BREAKPOINT is the sequence of bytes we insert for a
- breakpoint. On some machines, breakpoints are handled by the
- target environment and we don't have to worry about them here. */
-#ifdef BIG_BREAKPOINT
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- {
- static unsigned char big_break_insn[] = BIG_BREAKPOINT;
- *lenptr = sizeof (big_break_insn);
- return big_break_insn;
- }
-#endif
-#ifdef LITTLE_BREAKPOINT
- if (TARGET_BYTE_ORDER != BIG_ENDIAN)
+
+struct displaced_step_closure *
+simple_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
+{
+ size_t len = gdbarch_max_insn_length (gdbarch);
+ gdb_byte *buf = xmalloc (len);
+
+ read_memory (from, buf, len);
+ write_memory (to, buf, len);
+
+ if (debug_displaced)
{
- static unsigned char little_break_insn[] = LITTLE_BREAKPOINT;
- *lenptr = sizeof (little_break_insn);
- return little_break_insn;
+ fprintf_unfiltered (gdb_stdlog, "displaced: copy %s->%s: ",
+ paddress (gdbarch, from), paddress (gdbarch, to));
+ displaced_step_dump_bytes (gdb_stdlog, buf, len);
}
-#endif
-#ifdef BREAKPOINT
- {
- static unsigned char break_insn[] = BREAKPOINT;
- *lenptr = sizeof (break_insn);
- return break_insn;
- }
-#endif
- *lenptr = 0;
- return NULL;
+
+ return (struct displaced_step_closure *) buf;
}
-int
-generic_frameless_function_invocation_not (struct frame_info *fi)
+
+void
+simple_displaced_step_free_closure (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure)
{
- return 0;
+ xfree (closure);
}
int
-generic_return_value_on_stack_not (struct type *type)
+default_displaced_step_hw_singlestep (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure)
{
- return 0;
+ return !gdbarch_software_single_step_p (gdbarch);
}
CORE_ADDR
-generic_skip_trampoline_code (CORE_ADDR pc)
+displaced_step_at_entry_point (struct gdbarch *gdbarch)
{
- return 0;
-}
+ CORE_ADDR addr;
+ int bp_len;
-int
-generic_in_solib_call_trampoline (CORE_ADDR pc, char *name)
-{
- return 0;
+ addr = entry_point_address ();
+
+ /* Inferior calls also use the entry point as a breakpoint location.
+ We don't want displaced stepping to interfere with those
+ breakpoints, so leave space. */
+ gdbarch_breakpoint_from_pc (gdbarch, &addr, &bp_len);
+ addr += bp_len * 2;
+
+ return addr;
}
int
-generic_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
-{
- return 0;
+legacy_register_sim_regno (struct gdbarch *gdbarch, int regnum)
+{
+ /* Only makes sense to supply raw registers. */
+ gdb_assert (regnum >= 0 && regnum < gdbarch_num_regs (gdbarch));
+ /* NOTE: cagney/2002-05-13: The old code did it this way and it is
+ suspected that some GDB/SIM combinations may rely on this
+ behavour. The default should be one2one_register_sim_regno
+ (below). */
+ if (gdbarch_register_name (gdbarch, regnum) != NULL
+ && gdbarch_register_name (gdbarch, regnum)[0] != '\0')
+ return regnum;
+ else
+ return LEGACY_SIM_REGNO_IGNORE;
}
-char *
-legacy_register_name (int i)
+CORE_ADDR
+generic_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
-#ifdef REGISTER_NAMES
- static char *names[] = REGISTER_NAMES;
- if (i < 0 || i >= (sizeof (names) / sizeof (*names)))
- return NULL;
- else
- return names[i];
-#else
- internal_error (__FILE__, __LINE__,
- "legacy_register_name: called.");
- return NULL;
-#endif
+ return 0;
}
-#if defined (CALL_DUMMY)
-LONGEST legacy_call_dummy_words[] = CALL_DUMMY;
-#else
-LONGEST legacy_call_dummy_words[1];
-#endif
-int legacy_sizeof_call_dummy_words = sizeof (legacy_call_dummy_words);
-
-void
-generic_remote_translate_xfer_address (CORE_ADDR gdb_addr, int gdb_len,
- CORE_ADDR * rem_addr, int *rem_len)
+CORE_ADDR
+generic_skip_solib_resolver (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- *rem_addr = gdb_addr;
- *rem_len = gdb_len;
+ return 0;
}
int
-generic_prologue_frameless_p (CORE_ADDR ip)
+generic_in_solib_return_trampoline (struct gdbarch *gdbarch,
+ CORE_ADDR pc, const char *name)
{
-#ifdef SKIP_PROLOGUE_FRAMELESS_P
- return ip == SKIP_PROLOGUE_FRAMELESS_P (ip);
-#else
- return ip == SKIP_PROLOGUE (ip);
-#endif
+ return 0;
}
-/* New/multi-arched targets should use the correct gdbarch field
- instead of using this global pointer. */
int
-legacy_print_insn (bfd_vma vma, disassemble_info *info)
+generic_stack_frame_destroyed_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- return (*tm_print_insn) (vma, info);
+ return 0;
}
-/* Helper functions for INNER_THAN */
+/* Helper functions for gdbarch_inner_than */
int
core_addr_lessthan (CORE_ADDR lhs, CORE_ADDR rhs)
return (lhs > rhs);
}
+/* Misc helper functions for targets. */
-/* Helper functions for TARGET_{FLOAT,DOUBLE}_FORMAT */
-
-const struct floatformat *
-default_float_format (struct gdbarch *gdbarch)
+CORE_ADDR
+core_addr_identity (struct gdbarch *gdbarch, CORE_ADDR addr)
{
-#if GDB_MULTI_ARCH
- int byte_order = gdbarch_byte_order (gdbarch);
-#else
- int byte_order = TARGET_BYTE_ORDER;
-#endif
- switch (byte_order)
- {
- case BIG_ENDIAN:
- return &floatformat_ieee_single_big;
- case LITTLE_ENDIAN:
- return &floatformat_ieee_single_little;
- default:
- internal_error (__FILE__, __LINE__,
- "default_float_format: bad byte order");
- }
+ return addr;
}
-
-const struct floatformat *
-default_double_format (struct gdbarch *gdbarch)
+CORE_ADDR
+convert_from_func_ptr_addr_identity (struct gdbarch *gdbarch, CORE_ADDR addr,
+ struct target_ops *targ)
{
-#if GDB_MULTI_ARCH
- int byte_order = gdbarch_byte_order (gdbarch);
-#else
- int byte_order = TARGET_BYTE_ORDER;
-#endif
- switch (byte_order)
- {
- case BIG_ENDIAN:
- return &floatformat_ieee_double_big;
- case LITTLE_ENDIAN:
- return &floatformat_ieee_double_little;
- default:
- internal_error (__FILE__, __LINE__,
- "default_double_format: bad byte order");
- }
+ return addr;
}
-/* Misc helper functions for targets. */
-
int
-frame_num_args_unknown (struct frame_info *fi)
+no_op_reg_to_regnum (struct gdbarch *gdbarch, int reg)
{
- return -1;
+ return reg;
}
-
-int
-generic_register_convertible_not (int num)
+void
+default_coff_make_msymbol_special (int val, struct minimal_symbol *msym)
{
- return 0;
+ return;
}
-
-/* Under some ABI's that specify the `struct convention' for returning
- structures by value, by the time we've returned from the function,
- the return value is sitting there in the caller's buffer, but GDB
- has no way to find the address of that buffer.
+/* See arch-utils.h. */
- On such architectures, use this function as your
- extract_struct_value_address method. When asked to a struct
- returned by value in this fashion, GDB will print a nice error
- message, instead of garbage. */
-CORE_ADDR
-generic_cannot_extract_struct_value_address (char *dummy)
+void
+default_make_symbol_special (struct symbol *sym, struct objfile *objfile)
{
- return 0;
+ return;
}
-int
-default_register_sim_regno (int num)
+/* See arch-utils.h. */
+
+CORE_ADDR
+default_adjust_dwarf2_addr (CORE_ADDR pc)
{
- return num;
+ return pc;
}
+/* See arch-utils.h. */
CORE_ADDR
-core_addr_identity (CORE_ADDR addr)
+default_adjust_dwarf2_line (CORE_ADDR addr, int rel)
{
return addr;
}
int
-no_op_reg_to_regnum (int reg)
+cannot_register_not (struct gdbarch *gdbarch, int regnum)
{
- return reg;
+ return 0;
}
-/* For use by frame_args_address and frame_locals_address. */
-CORE_ADDR
-default_frame_address (struct frame_info *fi)
+/* Legacy version of target_virtual_frame_pointer(). Assumes that
+ there is an gdbarch_deprecated_fp_regnum and that it is the same,
+ cooked or raw. */
+
+void
+legacy_virtual_frame_pointer (struct gdbarch *gdbarch,
+ CORE_ADDR pc,
+ int *frame_regnum,
+ LONGEST *frame_offset)
{
- return fi->frame;
+ /* FIXME: cagney/2002-09-13: This code is used when identifying the
+ frame pointer of the current PC. It is assuming that a single
+ register and an offset can determine this. I think it should
+ instead generate a byte code expression as that would work better
+ with things like Dwarf2's CFI. */
+ if (gdbarch_deprecated_fp_regnum (gdbarch) >= 0
+ && gdbarch_deprecated_fp_regnum (gdbarch)
+ < gdbarch_num_regs (gdbarch))
+ *frame_regnum = gdbarch_deprecated_fp_regnum (gdbarch);
+ else if (gdbarch_sp_regnum (gdbarch) >= 0
+ && gdbarch_sp_regnum (gdbarch)
+ < gdbarch_num_regs (gdbarch))
+ *frame_regnum = gdbarch_sp_regnum (gdbarch);
+ else
+ /* Should this be an internal error? I guess so, it is reflecting
+ an architectural limitation in the current design. */
+ internal_error (__FILE__, __LINE__,
+ _("No virtual frame pointer available"));
+ *frame_offset = 0;
}
-/* Default prepare_to_procced(). */
+\f
int
-default_prepare_to_proceed (int select_it)
+generic_convert_register_p (struct gdbarch *gdbarch, int regnum,
+ struct type *type)
{
return 0;
}
-/* Generic prepare_to_proceed(). This one should be suitable for most
- targets that support threads. */
int
-generic_prepare_to_proceed (int select_it)
+default_stabs_argument_has_addr (struct gdbarch *gdbarch, struct type *type)
{
- ptid_t wait_ptid;
- struct target_waitstatus wait_status;
-
- /* Get the last target status returned by target_wait(). */
- get_last_target_status (&wait_ptid, &wait_status);
-
- /* Make sure we were stopped either at a breakpoint, or because
- of a Ctrl-C. */
- if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP &&
- wait_status.value.sig != TARGET_SIGNAL_INT))
- {
- return 0;
- }
-
- if (!ptid_equal (wait_ptid, minus_one_ptid)
- && !ptid_equal (inferior_ptid, wait_ptid))
- {
- /* Switched over from WAIT_PID. */
- CORE_ADDR wait_pc = read_pc_pid (wait_ptid);
-
- if (wait_pc != read_pc ())
- {
- if (select_it)
- {
- /* Switch back to WAIT_PID thread. */
- inferior_ptid = wait_ptid;
-
- /* FIXME: This stuff came from switch_to_thread() in
- thread.c (which should probably be a public function). */
- flush_cached_frames ();
- registers_changed ();
- stop_pc = wait_pc;
- select_frame (get_current_frame (), 0);
- }
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- if (breakpoint_here_p (wait_pc))
- {
- return 1;
- }
- }
- }
return 0;
-
-}
-
-void
-init_frame_pc_noop (int fromleaf, struct frame_info *prev)
-{
- return;
-}
-
-void
-init_frame_pc_default (int fromleaf, struct frame_info *prev)
-{
- if (fromleaf)
- prev->pc = SAVED_PC_AFTER_CALL (prev->next);
- else if (prev->next != NULL)
- prev->pc = FRAME_SAVED_PC (prev->next);
- else
- prev->pc = read_pc ();
}
int
-cannot_register_not (int regnum)
+generic_instruction_nullified (struct gdbarch *gdbarch,
+ struct regcache *regcache)
{
return 0;
}
-/* Legacy version of target_virtual_frame_pointer(). Assumes that
- there is an FP_REGNUM and that it is the same, cooked or raw. */
-
-void
-legacy_virtual_frame_pointer (CORE_ADDR pc,
- int *frame_regnum,
- LONGEST *frame_offset)
+int
+default_remote_register_number (struct gdbarch *gdbarch,
+ int regno)
{
- gdb_assert (FP_REGNUM >= 0);
- *frame_regnum = FP_REGNUM;
- *frame_offset = 0;
+ return regno;
}
-/* Assume the world is flat. Every register is large enough to fit a
- target integer. */
+/* See arch-utils.h. */
int
-generic_register_raw_size (int regnum)
+default_vsyscall_range (struct gdbarch *gdbarch, struct mem_range *range)
{
- gdb_assert (regnum >= 0 && regnum < NUM_REGS + NUM_PSEUDO_REGS);
- return TARGET_INT_BIT / HOST_CHAR_BIT;
+ return 0;
}
\f
/* Functions to manipulate the endianness of the target. */
-#ifdef TARGET_BYTE_ORDER_SELECTABLE
-/* compat - Catch old targets that expect a selectable byte-order to
- default to BIG_ENDIAN */
-#ifndef TARGET_BYTE_ORDER_DEFAULT
-#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN
-#endif
-#endif
-#if !TARGET_BYTE_ORDER_SELECTABLE_P
-#ifndef TARGET_BYTE_ORDER_DEFAULT
-/* compat - Catch old non byte-order selectable targets that do not
- define TARGET_BYTE_ORDER_DEFAULT and instead expect
- TARGET_BYTE_ORDER to be used as the default. For targets that
- defined neither TARGET_BYTE_ORDER nor TARGET_BYTE_ORDER_DEFAULT the
- below will get a strange compiler warning. */
-#define TARGET_BYTE_ORDER_DEFAULT TARGET_BYTE_ORDER
-#endif
-#endif
-#ifndef TARGET_BYTE_ORDER_DEFAULT
-#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN /* arbitrary */
-#endif
-/* ``target_byte_order'' is only used when non- multi-arch.
- Multi-arch targets obtain the current byte order using
- TARGET_BYTE_ORDER which is controlled by gdbarch.*. */
-int target_byte_order = TARGET_BYTE_ORDER_DEFAULT;
-int target_byte_order_auto = 1;
+static enum bfd_endian target_byte_order_user = BFD_ENDIAN_UNKNOWN;
static const char endian_big[] = "big";
static const char endian_little[] = "little";
static const char endian_auto[] = "auto";
-static const char *endian_enum[] =
+static const char *const endian_enum[] =
{
endian_big,
endian_little,
};
static const char *set_endian_string;
+enum bfd_endian
+selected_byte_order (void)
+{
+ return target_byte_order_user;
+}
+
/* Called by ``show endian''. */
static void
-show_endian (char *args, int from_tty)
-{
- if (TARGET_BYTE_ORDER_AUTO)
- printf_unfiltered ("The target endianness is set automatically (currently %s endian)\n",
- (TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little"));
+show_endian (struct ui_file *file, int from_tty, struct cmd_list_element *c,
+ const char *value)
+{
+ if (target_byte_order_user == BFD_ENDIAN_UNKNOWN)
+ if (gdbarch_byte_order (get_current_arch ()) == BFD_ENDIAN_BIG)
+ fprintf_unfiltered (file, _("The target endianness is set automatically "
+ "(currently big endian)\n"));
+ else
+ fprintf_unfiltered (file, _("The target endianness is set automatically "
+ "(currently little endian)\n"));
else
- printf_unfiltered ("The target is assumed to be %s endian\n",
- (TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little"));
+ if (target_byte_order_user == BFD_ENDIAN_BIG)
+ fprintf_unfiltered (file,
+ _("The target is assumed to be big endian\n"));
+ else
+ fprintf_unfiltered (file,
+ _("The target is assumed to be little endian\n"));
}
static void
set_endian (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
- if (!TARGET_BYTE_ORDER_SELECTABLE_P)
- {
- printf_unfiltered ("Byte order is not selectable.");
- }
- else if (set_endian_string == endian_auto)
+ struct gdbarch_info info;
+
+ gdbarch_info_init (&info);
+
+ if (set_endian_string == endian_auto)
{
- target_byte_order_auto = 1;
+ target_byte_order_user = BFD_ENDIAN_UNKNOWN;
+ if (! gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ _("set_endian: architecture update failed"));
}
else if (set_endian_string == endian_little)
{
- target_byte_order_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.byte_order = LITTLE_ENDIAN;
- if (! gdbarch_update_p (info))
- {
- printf_unfiltered ("Little endian target not supported by GDB\n");
- }
- }
+ info.byte_order = BFD_ENDIAN_LITTLE;
+ if (! gdbarch_update_p (info))
+ printf_unfiltered (_("Little endian target not supported by GDB\n"));
else
- {
- target_byte_order = LITTLE_ENDIAN;
- }
+ target_byte_order_user = BFD_ENDIAN_LITTLE;
}
else if (set_endian_string == endian_big)
{
- target_byte_order_auto = 0;
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.byte_order = BIG_ENDIAN;
- if (! gdbarch_update_p (info))
- {
- printf_unfiltered ("Big endian target not supported by GDB\n");
- }
- }
+ info.byte_order = BFD_ENDIAN_BIG;
+ if (! gdbarch_update_p (info))
+ printf_unfiltered (_("Big endian target not supported by GDB\n"));
else
- {
- target_byte_order = BIG_ENDIAN;
- }
+ target_byte_order_user = BFD_ENDIAN_BIG;
}
else
internal_error (__FILE__, __LINE__,
- "set_endian: bad value");
- show_endian (NULL, from_tty);
+ _("set_endian: bad value"));
+
+ show_endian (gdb_stdout, from_tty, NULL, NULL);
}
-/* Set the endianness from a BFD. */
+/* Given SELECTED, a currently selected BFD architecture, and
+ TARGET_DESC, the current target description, return what
+ architecture to use.
-static void
-set_endian_from_file (bfd *abfd)
-{
- if (GDB_MULTI_ARCH)
- internal_error (__FILE__, __LINE__,
- "set_endian_from_file: not for multi-arch");
- if (TARGET_BYTE_ORDER_SELECTABLE_P)
- {
- int want;
-
- if (bfd_big_endian (abfd))
- want = BIG_ENDIAN;
- else
- want = LITTLE_ENDIAN;
- if (TARGET_BYTE_ORDER_AUTO)
- target_byte_order = want;
- else if (TARGET_BYTE_ORDER != want)
- warning ("%s endian file does not match %s endian target.",
- want == BIG_ENDIAN ? "big" : "little",
- TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
- }
- else
- {
- if (bfd_big_endian (abfd)
- ? TARGET_BYTE_ORDER != BIG_ENDIAN
- : TARGET_BYTE_ORDER == BIG_ENDIAN)
- warning ("%s endian file does not match %s endian target.",
- bfd_big_endian (abfd) ? "big" : "little",
- TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
- }
-}
+ SELECTED may be NULL, in which case we return the architecture
+ associated with TARGET_DESC. If SELECTED specifies a variant
+ of the architecture associtated with TARGET_DESC, return the
+ more specific of the two.
+ If SELECTED is a different architecture, but it is accepted as
+ compatible by the target, we can use the target architecture.
-/* Functions to manipulate the architecture of the target */
+ If SELECTED is obviously incompatible, warn the user. */
-enum set_arch { set_arch_auto, set_arch_manual };
+static const struct bfd_arch_info *
+choose_architecture_for_target (const struct target_desc *target_desc,
+ const struct bfd_arch_info *selected)
+{
+ const struct bfd_arch_info *from_target = tdesc_architecture (target_desc);
+ const struct bfd_arch_info *compat1, *compat2;
-int target_architecture_auto = 1;
+ if (selected == NULL)
+ return from_target;
-const char *set_architecture_string;
+ if (from_target == NULL)
+ return selected;
-/* Old way of changing the current architecture. */
+ /* struct bfd_arch_info objects are singletons: that is, there's
+ supposed to be exactly one instance for a given machine. So you
+ can tell whether two are equivalent by comparing pointers. */
+ if (from_target == selected)
+ return selected;
-extern const struct bfd_arch_info bfd_default_arch_struct;
-const struct bfd_arch_info *target_architecture = &bfd_default_arch_struct;
-int (*target_architecture_hook) (const struct bfd_arch_info *ap);
+ /* BFD's 'A->compatible (A, B)' functions return zero if A and B are
+ incompatible. But if they are compatible, it returns the 'more
+ featureful' of the two arches. That is, if A can run code
+ written for B, but B can't run code written for A, then it'll
+ return A.
-static int
-arch_ok (const struct bfd_arch_info *arch)
-{
- if (GDB_MULTI_ARCH)
- internal_error (__FILE__, __LINE__,
- "arch_ok: not multi-arched");
- /* Should be performing the more basic check that the binary is
- compatible with GDB. */
- /* Check with the target that the architecture is valid. */
- return (target_architecture_hook == NULL
- || target_architecture_hook (arch));
-}
+ Some targets (e.g. MIPS as of 2006-12-04) don't fully
+ implement this, instead always returning NULL or the first
+ argument. We detect that case by checking both directions. */
-static void
-set_arch (const struct bfd_arch_info *arch,
- enum set_arch type)
-{
- if (GDB_MULTI_ARCH)
- internal_error (__FILE__, __LINE__,
- "set_arch: not multi-arched");
- switch (type)
+ compat1 = selected->compatible (selected, from_target);
+ compat2 = from_target->compatible (from_target, selected);
+
+ if (compat1 == NULL && compat2 == NULL)
{
- case set_arch_auto:
- if (!arch_ok (arch))
- warning ("Target may not support %s architecture",
- arch->printable_name);
- target_architecture = arch;
- break;
- case set_arch_manual:
- if (!arch_ok (arch))
- {
- printf_unfiltered ("Target does not support `%s' architecture.\n",
- arch->printable_name);
- }
- else
- {
- target_architecture_auto = 0;
- target_architecture = arch;
- }
- break;
+ /* BFD considers the architectures incompatible. Check our
+ target description whether it accepts SELECTED as compatible
+ anyway. */
+ if (tdesc_compatible_p (target_desc, selected))
+ return from_target;
+
+ warning (_("Selected architecture %s is not compatible "
+ "with reported target architecture %s"),
+ selected->printable_name, from_target->printable_name);
+ return selected;
}
- if (gdbarch_debug)
- gdbarch_dump (current_gdbarch, gdb_stdlog);
-}
-/* Set the architecture from arch/machine (deprecated) */
+ if (compat1 == NULL)
+ return compat2;
+ if (compat2 == NULL)
+ return compat1;
+ if (compat1 == compat2)
+ return compat1;
-void
-set_architecture_from_arch_mach (enum bfd_architecture arch,
- unsigned long mach)
-{
- const struct bfd_arch_info *wanted = bfd_lookup_arch (arch, mach);
- if (GDB_MULTI_ARCH)
- internal_error (__FILE__, __LINE__,
- "set_architecture_from_arch_mach: not multi-arched");
- if (wanted != NULL)
- set_arch (wanted, set_arch_manual);
- else
- internal_error (__FILE__, __LINE__,
- "gdbarch: hardwired architecture/machine not recognized");
+ /* If the two didn't match, but one of them was a default
+ architecture, assume the more specific one is correct. This
+ handles the case where an executable or target description just
+ says "mips", but the other knows which MIPS variant. */
+ if (compat1->the_default)
+ return compat2;
+ if (compat2->the_default)
+ return compat1;
+
+ /* We have no idea which one is better. This is a bug, but not
+ a critical problem; warn the user. */
+ warning (_("Selected architecture %s is ambiguous with "
+ "reported target architecture %s"),
+ selected->printable_name, from_target->printable_name);
+ return selected;
}
-/* Set the architecture from a BFD (deprecated) */
+/* Functions to manipulate the architecture of the target. */
-static void
-set_architecture_from_file (bfd *abfd)
+enum set_arch { set_arch_auto, set_arch_manual };
+
+static const struct bfd_arch_info *target_architecture_user;
+
+static const char *set_architecture_string;
+
+const char *
+selected_architecture_name (void)
{
- const struct bfd_arch_info *wanted = bfd_get_arch_info (abfd);
- if (GDB_MULTI_ARCH)
- internal_error (__FILE__, __LINE__,
- "set_architecture_from_file: not multi-arched");
- if (target_architecture_auto)
- {
- set_arch (wanted, set_arch_auto);
- }
- else if (wanted != target_architecture)
- {
- warning ("%s architecture file may be incompatible with %s target.",
- wanted->printable_name,
- target_architecture->printable_name);
- }
+ if (target_architecture_user == NULL)
+ return NULL;
+ else
+ return set_architecture_string;
}
-
/* Called if the user enters ``show architecture'' without an
- argument. */
+ argument. */
static void
-show_architecture (char *args, int from_tty)
+show_architecture (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
- const char *arch;
- arch = TARGET_ARCHITECTURE->printable_name;
- if (target_architecture_auto)
- printf_filtered ("The target architecture is set automatically (currently %s)\n", arch);
+ if (target_architecture_user == NULL)
+ fprintf_filtered (file, _("The target architecture is set "
+ "automatically (currently %s)\n"),
+ gdbarch_bfd_arch_info (get_current_arch ())->printable_name);
else
- printf_filtered ("The target architecture is assumed to be %s\n", arch);
+ fprintf_filtered (file, _("The target architecture is assumed to be %s\n"),
+ set_architecture_string);
}
/* Called if the user enters ``set architecture'' with or without an
- argument. */
+ argument. */
static void
set_architecture (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
+ struct gdbarch_info info;
+
+ gdbarch_info_init (&info);
+
if (strcmp (set_architecture_string, "auto") == 0)
{
- target_architecture_auto = 1;
+ target_architecture_user = NULL;
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ _("could not select an architecture automatically"));
}
- else if (GDB_MULTI_ARCH)
+ else
{
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
info.bfd_arch_info = bfd_scan_arch (set_architecture_string);
if (info.bfd_arch_info == NULL)
internal_error (__FILE__, __LINE__,
- "set_architecture: bfd_scan_arch failed");
+ _("set_architecture: bfd_scan_arch failed"));
if (gdbarch_update_p (info))
- target_architecture_auto = 0;
+ target_architecture_user = info.bfd_arch_info;
else
- printf_unfiltered ("Architecture `%s' not recognized.\n",
+ printf_unfiltered (_("Architecture `%s' not recognized.\n"),
set_architecture_string);
}
- else
+ show_architecture (gdb_stdout, from_tty, NULL, NULL);
+}
+
+/* Try to select a global architecture that matches "info". Return
+ non-zero if the attempt succeeds. */
+int
+gdbarch_update_p (struct gdbarch_info info)
+{
+ struct gdbarch *new_gdbarch;
+
+ /* Check for the current file. */
+ if (info.abfd == NULL)
+ info.abfd = exec_bfd;
+ if (info.abfd == NULL)
+ info.abfd = core_bfd;
+
+ /* Check for the current target description. */
+ if (info.target_desc == NULL)
+ info.target_desc = target_current_description ();
+
+ new_gdbarch = gdbarch_find_by_info (info);
+
+ /* If there no architecture by that name, reject the request. */
+ if (new_gdbarch == NULL)
{
- const struct bfd_arch_info *arch
- = bfd_scan_arch (set_architecture_string);
- if (arch == NULL)
- internal_error (__FILE__, __LINE__,
- "set_architecture: bfd_scan_arch failed");
- set_arch (arch, set_arch_manual);
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update_p: "
+ "Architecture not found\n");
+ return 0;
}
- show_architecture (NULL, from_tty);
+
+ /* If it is the same old architecture, accept the request (but don't
+ swap anything). */
+ if (new_gdbarch == target_gdbarch ())
+ {
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update_p: "
+ "Architecture %s (%s) unchanged\n",
+ host_address_to_string (new_gdbarch),
+ gdbarch_bfd_arch_info (new_gdbarch)->printable_name);
+ return 1;
+ }
+
+ /* It's a new architecture, swap it in. */
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_update_p: "
+ "New architecture %s (%s) selected\n",
+ host_address_to_string (new_gdbarch),
+ gdbarch_bfd_arch_info (new_gdbarch)->printable_name);
+ set_target_gdbarch (new_gdbarch);
+
+ return 1;
+}
+
+/* Return the architecture for ABFD. If no suitable architecture
+ could be find, return NULL. */
+
+struct gdbarch *
+gdbarch_from_bfd (bfd *abfd)
+{
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
+
+ info.abfd = abfd;
+ return gdbarch_find_by_info (info);
}
/* Set the dynamic target-system-dependent parameters (architecture,
void
set_gdbarch_from_file (bfd *abfd)
{
- if (GDB_MULTI_ARCH)
- {
- struct gdbarch_info info;
- memset (&info, 0, sizeof info);
- info.abfd = abfd;
- if (! gdbarch_update_p (info))
- error ("Architecture of file not recognized.\n");
- }
- else
- {
- set_architecture_from_file (abfd);
- set_endian_from_file (abfd);
- }
+ struct gdbarch_info info;
+ struct gdbarch *gdbarch;
+
+ gdbarch_info_init (&info);
+ info.abfd = abfd;
+ info.target_desc = target_current_description ();
+ gdbarch = gdbarch_find_by_info (info);
+
+ if (gdbarch == NULL)
+ error (_("Architecture of file not recognized."));
+ set_target_gdbarch (gdbarch);
}
/* Initialize the current architecture. Update the ``set
static const bfd_target *default_bfd_vec;
#endif
+static enum bfd_endian default_byte_order = BFD_ENDIAN_UNKNOWN;
+
void
initialize_current_architecture (void)
{
const char **arches = gdbarch_printable_names ();
-
- /* determine a default architecture and byte order. */
struct gdbarch_info info;
- memset (&info, 0, sizeof (info));
+
+ /* determine a default architecture and byte order. */
+ gdbarch_info_init (&info);
- /* Find a default architecture. */
- if (info.bfd_arch_info == NULL
- && default_bfd_arch != NULL)
- info.bfd_arch_info = default_bfd_arch;
- if (info.bfd_arch_info == NULL)
+ /* Find a default architecture. */
+ if (default_bfd_arch == NULL)
{
/* Choose the architecture by taking the first one
- alphabetically. */
+ alphabetically. */
const char *chosen = arches[0];
const char **arch;
for (arch = arches; *arch != NULL; arch++)
}
if (chosen == NULL)
internal_error (__FILE__, __LINE__,
- "initialize_current_architecture: No arch");
- info.bfd_arch_info = bfd_scan_arch (chosen);
- if (info.bfd_arch_info == NULL)
+ _("initialize_current_architecture: No arch"));
+ default_bfd_arch = bfd_scan_arch (chosen);
+ if (default_bfd_arch == NULL)
internal_error (__FILE__, __LINE__,
- "initialize_current_architecture: Arch not found");
+ _("initialize_current_architecture: Arch not found"));
}
- /* take several guesses at a byte order. */
- /* NB: can't use TARGET_BYTE_ORDER_DEFAULT as its definition is
- forced above. */
- if (info.byte_order == 0
+ info.bfd_arch_info = default_bfd_arch;
+
+ /* Take several guesses at a byte order. */
+ if (default_byte_order == BFD_ENDIAN_UNKNOWN
&& default_bfd_vec != NULL)
{
- /* Extract BFD's default vector's byte order. */
+ /* Extract BFD's default vector's byte order. */
switch (default_bfd_vec->byteorder)
{
case BFD_ENDIAN_BIG:
- info.byte_order = BIG_ENDIAN;
+ default_byte_order = BFD_ENDIAN_BIG;
break;
case BFD_ENDIAN_LITTLE:
- info.byte_order = LITTLE_ENDIAN;
+ default_byte_order = BFD_ENDIAN_LITTLE;
break;
default:
break;
}
}
- if (info.byte_order == 0)
+ if (default_byte_order == BFD_ENDIAN_UNKNOWN)
{
- /* look for ``*el-*'' in the target name. */
+ /* look for ``*el-*'' in the target name. */
const char *chp;
chp = strchr (target_name, '-');
if (chp != NULL
&& chp - 2 >= target_name
- && strncmp (chp - 2, "el", 2) == 0)
- info.byte_order = LITTLE_ENDIAN;
+ && startswith (chp - 2, "el"))
+ default_byte_order = BFD_ENDIAN_LITTLE;
}
- if (info.byte_order == 0)
+ if (default_byte_order == BFD_ENDIAN_UNKNOWN)
{
/* Wire it to big-endian!!! */
- info.byte_order = BIG_ENDIAN;
+ default_byte_order = BFD_ENDIAN_BIG;
}
- if (GDB_MULTI_ARCH)
- {
- if (! gdbarch_update_p (info))
- {
- internal_error (__FILE__, __LINE__,
- "initialize_current_architecture: Selection of initial architecture failed");
- }
- }
- else
- initialize_non_multiarch ();
+ info.byte_order = default_byte_order;
+ info.byte_order_for_code = info.byte_order;
+
+ if (! gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ _("initialize_current_architecture: Selection of "
+ "initial architecture failed"));
/* Create the ``set architecture'' command appending ``auto'' to the
- list of architectures. */
+ list of architectures. */
{
- struct cmd_list_element *c;
- /* Append ``auto''. */
+ /* Append ``auto''. */
int nr;
for (nr = 0; arches[nr] != NULL; nr++);
arches = xrealloc (arches, sizeof (char*) * (nr + 2));
arches[nr + 0] = "auto";
arches[nr + 1] = NULL;
- /* FIXME: add_set_enum_cmd() uses an array of ``char *'' instead
- of ``const char *''. We just happen to know that the casts are
- safe. */
- c = add_set_enum_cmd ("architecture", class_support,
- arches, &set_architecture_string,
- "Set architecture of target.",
- &setlist);
- c->function.sfunc = set_architecture;
+ add_setshow_enum_cmd ("architecture", class_support,
+ arches, &set_architecture_string,
+ _("Set architecture of target."),
+ _("Show architecture of target."), NULL,
+ set_architecture, show_architecture,
+ &setlist, &showlist);
add_alias_cmd ("processor", "architecture", class_support, 1, &setlist);
- /* Don't use set_from_show - need to print both auto/manual and
- current setting. */
- add_cmd ("architecture", class_support, show_architecture,
- "Show the current target architecture", &showlist);
}
}
-/* */
+/* Initialize a gdbarch info to values that will be automatically
+ overridden. Note: Originally, this ``struct info'' was initialized
+ using memset(0). Unfortunately, that ran into problems, namely
+ BFD_ENDIAN_BIG is zero. An explicit initialization function that
+ can explicitly set each field to a well defined value is used. */
+
+void
+gdbarch_info_init (struct gdbarch_info *info)
+{
+ memset (info, 0, sizeof (struct gdbarch_info));
+ info->byte_order = BFD_ENDIAN_UNKNOWN;
+ info->byte_order_for_code = info->byte_order;
+ info->osabi = GDB_OSABI_UNINITIALIZED;
+}
+
+/* Similar to init, but this time fill in the blanks. Information is
+ obtained from the global "set ..." options and explicitly
+ initialized INFO fields. */
+
+void
+gdbarch_info_fill (struct gdbarch_info *info)
+{
+ /* "(gdb) set architecture ...". */
+ if (info->bfd_arch_info == NULL
+ && target_architecture_user)
+ info->bfd_arch_info = target_architecture_user;
+ /* From the file. */
+ if (info->bfd_arch_info == NULL
+ && info->abfd != NULL
+ && bfd_get_arch (info->abfd) != bfd_arch_unknown
+ && bfd_get_arch (info->abfd) != bfd_arch_obscure)
+ info->bfd_arch_info = bfd_get_arch_info (info->abfd);
+ /* From the target. */
+ if (info->target_desc != NULL)
+ info->bfd_arch_info = choose_architecture_for_target
+ (info->target_desc, info->bfd_arch_info);
+ /* From the default. */
+ if (info->bfd_arch_info == NULL)
+ info->bfd_arch_info = default_bfd_arch;
+
+ /* "(gdb) set byte-order ...". */
+ if (info->byte_order == BFD_ENDIAN_UNKNOWN
+ && target_byte_order_user != BFD_ENDIAN_UNKNOWN)
+ info->byte_order = target_byte_order_user;
+ /* From the INFO struct. */
+ if (info->byte_order == BFD_ENDIAN_UNKNOWN
+ && info->abfd != NULL)
+ info->byte_order = (bfd_big_endian (info->abfd) ? BFD_ENDIAN_BIG
+ : bfd_little_endian (info->abfd) ? BFD_ENDIAN_LITTLE
+ : BFD_ENDIAN_UNKNOWN);
+ /* From the default. */
+ if (info->byte_order == BFD_ENDIAN_UNKNOWN)
+ info->byte_order = default_byte_order;
+ info->byte_order_for_code = info->byte_order;
+
+ /* "(gdb) set osabi ...". Handled by gdbarch_lookup_osabi. */
+ /* From the manual override, or from file. */
+ if (info->osabi == GDB_OSABI_UNINITIALIZED)
+ info->osabi = gdbarch_lookup_osabi (info->abfd);
+ /* From the target. */
+ if (info->osabi == GDB_OSABI_UNKNOWN && info->target_desc != NULL)
+ info->osabi = tdesc_osabi (info->target_desc);
+ /* From the configured default. */
+#ifdef GDB_OSABI_DEFAULT
+ if (info->osabi == GDB_OSABI_UNKNOWN)
+ info->osabi = GDB_OSABI_DEFAULT;
+#endif
+
+ /* Must have at least filled in the architecture. */
+ gdb_assert (info->bfd_arch_info != NULL);
+}
+
+/* Return "current" architecture. If the target is running, this is
+ the architecture of the selected frame. Otherwise, the "current"
+ architecture defaults to the target architecture.
+
+ This function should normally be called solely by the command
+ interpreter routines to determine the architecture to execute a
+ command in. */
+struct gdbarch *
+get_current_arch (void)
+{
+ if (has_stack_frames ())
+ return get_frame_arch (get_selected_frame (NULL));
+ else
+ return target_gdbarch ();
+}
+
+int
+default_has_shared_address_space (struct gdbarch *gdbarch)
+{
+ /* Simply say no. In most unix-like targets each inferior/process
+ has its own address space. */
+ return 0;
+}
+
+int
+default_fast_tracepoint_valid_at (struct gdbarch *gdbarch, CORE_ADDR addr,
+ char **msg)
+{
+ /* We don't know if maybe the target has some way to do fast
+ tracepoints that doesn't need gdbarch, so always say yes. */
+ if (msg)
+ *msg = NULL;
+ return 1;
+}
+
+void
+default_remote_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr,
+ int *kindptr)
+{
+ gdbarch_breakpoint_from_pc (gdbarch, pcptr, kindptr);
+}
+
+void
+default_gen_return_address (struct gdbarch *gdbarch,
+ struct agent_expr *ax, struct axs_value *value,
+ CORE_ADDR scope)
+{
+ error (_("This architecture has no method to collect a return address."));
+}
+
+int
+default_return_in_first_hidden_param_p (struct gdbarch *gdbarch,
+ struct type *type)
+{
+ /* Usually, the return value's address is stored the in the "first hidden"
+ parameter if the return value should be passed by reference, as
+ specified in ABI. */
+ return language_pass_by_reference (type);
+}
+
+int default_insn_is_call (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return 0;
+}
+
+int default_insn_is_ret (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return 0;
+}
+
+int default_insn_is_jump (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return 0;
+}
+
+void
+default_skip_permanent_breakpoint (struct regcache *regcache)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ CORE_ADDR current_pc = regcache_read_pc (regcache);
+ const gdb_byte *bp_insn;
+ int bp_len;
+
+ bp_insn = gdbarch_breakpoint_from_pc (gdbarch, ¤t_pc, &bp_len);
+ current_pc += bp_len;
+ regcache_write_pc (regcache, current_pc);
+}
+
+CORE_ADDR
+default_infcall_mmap (CORE_ADDR size, unsigned prot)
+{
+ error (_("This target does not support inferior memory allocation by mmap."));
+}
+
+void
+default_infcall_munmap (CORE_ADDR addr, CORE_ADDR size)
+{
+ /* Memory reserved by inferior mmap is kept leaked. */
+}
+
+/* -mcmodel=large is used so that no GOT (Global Offset Table) is needed to be
+ created in inferior memory by GDB (normally it is set by ld.so). */
+
+char *
+default_gcc_target_options (struct gdbarch *gdbarch)
+{
+ return xstrprintf ("-m%d%s", gdbarch_ptr_bit (gdbarch),
+ gdbarch_ptr_bit (gdbarch) == 64 ? " -mcmodel=large" : "");
+}
+
+/* gdbarch gnu_triplet_regexp method. */
+
+const char *
+default_gnu_triplet_regexp (struct gdbarch *gdbarch)
+{
+ return gdbarch_bfd_arch_info (gdbarch)->arch_name;
+}
+
+/* Default method for gdbarch_addressable_memory_unit_size. By default, a memory byte has
+ a size of 1 octet. */
+
+int
+default_addressable_memory_unit_size (struct gdbarch *gdbarch)
+{
+ return 1;
+}
+/* -Wmissing-prototypes */
extern initialize_file_ftype _initialize_gdbarch_utils;
void
_initialize_gdbarch_utils (void)
{
- struct cmd_list_element *c;
- c = add_set_enum_cmd ("endian", class_support,
- endian_enum, &set_endian_string,
- "Set endianness of target.",
- &setlist);
- c->function.sfunc = set_endian;
- /* Don't use set_from_show - need to print both auto/manual and
- current setting. */
- add_cmd ("endian", class_support, show_endian,
- "Show the current byte-order", &showlist);
+ add_setshow_enum_cmd ("endian", class_support,
+ endian_enum, &set_endian_string,
+ _("Set endianness of target."),
+ _("Show endianness of target."),
+ NULL, set_endian, show_endian,
+ &setlist, &showlist);
}