/* GNU/Linux on ARM target support.
- Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
+ Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "target.h"
#include "doublest.h"
#include "solib-svr4.h"
#include "osabi.h"
+#include "regset.h"
#include "trad-frame.h"
#include "tramp-frame.h"
+#include "breakpoint.h"
#include "arm-tdep.h"
+#include "arm-linux-tdep.h"
+#include "linux-tdep.h"
#include "glibc-tdep.h"
+#include "arch-utils.h"
+#include "inferior.h"
+#include "gdbthread.h"
+#include "symfile.h"
#include "gdb_string.h"
+extern int arm_apcs_32;
+
/* Under ARM GNU/Linux the traditional way of performing a breakpoint
is to execute a particular software interrupt, rather than use a
particular undefined instruction to provoke a trap. Upon exection
static const char arm_linux_thumb_le_breakpoint[] = {0x01, 0xde};
-/* Description of the longjmp buffer. */
+/* Because the 16-bit Thumb breakpoint is affected by Thumb-2 IT blocks,
+ we must use a length-appropriate breakpoint for 32-bit Thumb
+ instructions. See also thumb_get_next_pc. */
+
+static const char arm_linux_thumb2_be_breakpoint[] = { 0xf7, 0xf0, 0xa0, 0x00 };
+
+static const char arm_linux_thumb2_le_breakpoint[] = { 0xf0, 0xf7, 0x00, 0xa0 };
+
+/* Description of the longjmp buffer. The buffer is treated as an array of
+ elements of size ARM_LINUX_JB_ELEMENT_SIZE.
+
+ The location of saved registers in this buffer (in particular the PC
+ to use after longjmp is called) varies depending on the ABI (in
+ particular the FP model) and also (possibly) the C Library.
+
+ For glibc, eglibc, and uclibc the following holds: If the FP model is
+ SoftVFP or VFP (which implies EABI) then the PC is at offset 9 in the
+ buffer. This is also true for the SoftFPA model. However, for the FPA
+ model the PC is at offset 21 in the buffer. */
#define ARM_LINUX_JB_ELEMENT_SIZE INT_REGISTER_SIZE
-#define ARM_LINUX_JB_PC 21
-
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
-/* FIXME rearnsha/2002-02-23: This function shouldn't be necessary.
- The ARM generic one should be able to handle the model used by
- linux and the low-level formatting of the registers should be
- hidden behind the regcache abstraction. */
-static void
-arm_linux_extract_return_value (struct type *type,
- char regbuf[],
- char *valbuf)
-{
- /* ScottB: This needs to be looked at to handle the different
- floating point emulators on ARM GNU/Linux. Right now the code
- assumes that fetch inferior registers does the right thing for
- GDB. I suspect this won't handle NWFPE registers correctly, nor
- will the default ARM version (arm_extract_return_value()). */
-
- int regnum = ((TYPE_CODE_FLT == TYPE_CODE (type))
- ? ARM_F0_REGNUM : ARM_A1_REGNUM);
- memcpy (valbuf, ®buf[DEPRECATED_REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
-}
-
+#define ARM_LINUX_JB_PC_FPA 21
+#define ARM_LINUX_JB_PC_EABI 9
+
/*
Dynamic Linking on ARM GNU/Linux
--------------------------------
#define ARM_LINUX_SIGRETURN_INSTR 0xef900077
#define ARM_LINUX_RT_SIGRETURN_INSTR 0xef9000ad
-/* For ARM EABI, recognize the pattern that glibc uses... alternatively,
- we could arrange to do this by function name, but they are not always
- exported. */
+/* For ARM EABI, the syscall number is not in the SWI instruction
+ (instead it is loaded into r7). We recognize the pattern that
+ glibc uses... alternatively, we could arrange to do this by
+ function name, but they are not always exported. */
#define ARM_SET_R7_SIGRETURN 0xe3a07077
#define ARM_SET_R7_RT_SIGRETURN 0xe3a070ad
#define ARM_EABI_SYSCALL 0xef000000
+/* OABI syscall restart trampoline, used for EABI executables too
+ whenever OABI support has been enabled in the kernel. */
+#define ARM_OABI_SYSCALL_RESTART_SYSCALL 0xef900000
+#define ARM_LDR_PC_SP_12 0xe49df00c
+
static void
-arm_linux_sigtramp_cache (struct frame_info *next_frame,
+arm_linux_sigtramp_cache (struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
CORE_ADDR func, int regs_offset)
{
- CORE_ADDR sp = frame_unwind_register_unsigned (next_frame, ARM_SP_REGNUM);
+ CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);
CORE_ADDR base = sp + regs_offset;
int i;
trad_frame_set_id (this_cache, frame_id_build (sp, func));
}
+/* There are a couple of different possible stack layouts that
+ we need to support.
+
+ Before version 2.6.18, the kernel used completely independent
+ layouts for non-RT and RT signals. For non-RT signals the stack
+ began directly with a struct sigcontext. For RT signals the stack
+ began with two redundant pointers (to the siginfo and ucontext),
+ and then the siginfo and ucontext.
+
+ As of version 2.6.18, the non-RT signal frame layout starts with
+ a ucontext and the RT signal frame starts with a siginfo and then
+ a ucontext. Also, the ucontext now has a designated save area
+ for coprocessor registers.
+
+ For RT signals, it's easy to tell the difference: we look for
+ pinfo, the pointer to the siginfo. If it has the expected
+ value, we have an old layout. If it doesn't, we have the new
+ layout.
+
+ For non-RT signals, it's a bit harder. We need something in one
+ layout or the other with a recognizable offset and value. We can't
+ use the return trampoline, because ARM usually uses SA_RESTORER,
+ in which case the stack return trampoline is not filled in.
+ We can't use the saved stack pointer, because sigaltstack might
+ be in use. So for now we guess the new layout... */
+
+/* There are three words (trap_no, error_code, oldmask) in
+ struct sigcontext before r0. */
+#define ARM_SIGCONTEXT_R0 0xc
+
+/* There are five words (uc_flags, uc_link, and three for uc_stack)
+ in the ucontext_t before the sigcontext. */
+#define ARM_UCONTEXT_SIGCONTEXT 0x14
+
+/* There are three elements in an rt_sigframe before the ucontext:
+ pinfo, puc, and info. The first two are pointers and the third
+ is a struct siginfo, with size 128 bytes. We could follow puc
+ to the ucontext, but it's simpler to skip the whole thing. */
+#define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8
+#define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88
+
+#define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80
+
+#define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a
+
static void
arm_linux_sigreturn_init (const struct tramp_frame *self,
- struct frame_info *next_frame,
+ struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
CORE_ADDR func)
{
- arm_linux_sigtramp_cache (next_frame, this_cache, func,
- 0x0c /* Offset to registers. */);
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);
+ ULONGEST uc_flags = read_memory_unsigned_integer (sp, 4, byte_order);
+
+ if (uc_flags == ARM_NEW_SIGFRAME_MAGIC)
+ arm_linux_sigtramp_cache (this_frame, this_cache, func,
+ ARM_UCONTEXT_SIGCONTEXT
+ + ARM_SIGCONTEXT_R0);
+ else
+ arm_linux_sigtramp_cache (this_frame, this_cache, func,
+ ARM_SIGCONTEXT_R0);
}
static void
arm_linux_rt_sigreturn_init (const struct tramp_frame *self,
- struct frame_info *next_frame,
+ struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
CORE_ADDR func)
{
- arm_linux_sigtramp_cache (next_frame, this_cache, func,
- 0x88 /* Offset to ucontext_t. */
- + 0x14 /* Offset to sigcontext. */
- + 0x0c /* Offset to registers. */);
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);
+ ULONGEST pinfo = read_memory_unsigned_integer (sp, 4, byte_order);
+
+ if (pinfo == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)
+ arm_linux_sigtramp_cache (this_frame, this_cache, func,
+ ARM_OLD_RT_SIGFRAME_UCONTEXT
+ + ARM_UCONTEXT_SIGCONTEXT
+ + ARM_SIGCONTEXT_R0);
+ else
+ arm_linux_sigtramp_cache (this_frame, this_cache, func,
+ ARM_NEW_RT_SIGFRAME_UCONTEXT
+ + ARM_UCONTEXT_SIGCONTEXT
+ + ARM_SIGCONTEXT_R0);
+}
+
+static void
+arm_linux_restart_syscall_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ CORE_ADDR sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);
+
+ trad_frame_set_reg_addr (this_cache, ARM_PC_REGNUM, sp);
+ trad_frame_set_reg_value (this_cache, ARM_SP_REGNUM, sp + 12);
+
+ /* Save a frame ID. */
+ trad_frame_set_id (this_cache, frame_id_build (sp, func));
}
static struct tramp_frame arm_linux_sigreturn_tramp_frame = {
arm_linux_rt_sigreturn_init
};
+static struct tramp_frame arm_linux_restart_syscall_tramp_frame = {
+ NORMAL_FRAME,
+ 4,
+ {
+ { ARM_OABI_SYSCALL_RESTART_SYSCALL, -1 },
+ { ARM_LDR_PC_SP_12, -1 },
+ { TRAMP_SENTINEL_INSN }
+ },
+ arm_linux_restart_syscall_init
+};
+
+/* Core file and register set support. */
+
+#define ARM_LINUX_SIZEOF_GREGSET (18 * INT_REGISTER_SIZE)
+
+void
+arm_linux_supply_gregset (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *gregs_buf, size_t len)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ const gdb_byte *gregs = gregs_buf;
+ int regno;
+ CORE_ADDR reg_pc;
+ gdb_byte pc_buf[INT_REGISTER_SIZE];
+
+ for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++)
+ if (regnum == -1 || regnum == regno)
+ regcache_raw_supply (regcache, regno,
+ gregs + INT_REGISTER_SIZE * regno);
+
+ if (regnum == ARM_PS_REGNUM || regnum == -1)
+ {
+ if (arm_apcs_32)
+ regcache_raw_supply (regcache, ARM_PS_REGNUM,
+ gregs + INT_REGISTER_SIZE * ARM_CPSR_GREGNUM);
+ else
+ regcache_raw_supply (regcache, ARM_PS_REGNUM,
+ gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM);
+ }
+
+ if (regnum == ARM_PC_REGNUM || regnum == -1)
+ {
+ reg_pc = extract_unsigned_integer (gregs
+ + INT_REGISTER_SIZE * ARM_PC_REGNUM,
+ INT_REGISTER_SIZE, byte_order);
+ reg_pc = gdbarch_addr_bits_remove (gdbarch, reg_pc);
+ store_unsigned_integer (pc_buf, INT_REGISTER_SIZE, byte_order, reg_pc);
+ regcache_raw_supply (regcache, ARM_PC_REGNUM, pc_buf);
+ }
+}
+
+void
+arm_linux_collect_gregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *gregs_buf, size_t len)
+{
+ gdb_byte *gregs = gregs_buf;
+ int regno;
+
+ for (regno = ARM_A1_REGNUM; regno < ARM_PC_REGNUM; regno++)
+ if (regnum == -1 || regnum == regno)
+ regcache_raw_collect (regcache, regno,
+ gregs + INT_REGISTER_SIZE * regno);
+
+ if (regnum == ARM_PS_REGNUM || regnum == -1)
+ {
+ if (arm_apcs_32)
+ regcache_raw_collect (regcache, ARM_PS_REGNUM,
+ gregs + INT_REGISTER_SIZE * ARM_CPSR_GREGNUM);
+ else
+ regcache_raw_collect (regcache, ARM_PS_REGNUM,
+ gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM);
+ }
+
+ if (regnum == ARM_PC_REGNUM || regnum == -1)
+ regcache_raw_collect (regcache, ARM_PC_REGNUM,
+ gregs + INT_REGISTER_SIZE * ARM_PC_REGNUM);
+}
+
+/* Support for register format used by the NWFPE FPA emulator. */
+
+#define typeNone 0x00
+#define typeSingle 0x01
+#define typeDouble 0x02
+#define typeExtended 0x03
+
+void
+supply_nwfpe_register (struct regcache *regcache, int regno,
+ const gdb_byte *regs)
+{
+ const gdb_byte *reg_data;
+ gdb_byte reg_tag;
+ gdb_byte buf[FP_REGISTER_SIZE];
+
+ reg_data = regs + (regno - ARM_F0_REGNUM) * FP_REGISTER_SIZE;
+ reg_tag = regs[(regno - ARM_F0_REGNUM) + NWFPE_TAGS_OFFSET];
+ memset (buf, 0, FP_REGISTER_SIZE);
+
+ switch (reg_tag)
+ {
+ case typeSingle:
+ memcpy (buf, reg_data, 4);
+ break;
+ case typeDouble:
+ memcpy (buf, reg_data + 4, 4);
+ memcpy (buf + 4, reg_data, 4);
+ break;
+ case typeExtended:
+ /* We want sign and exponent, then least significant bits,
+ then most significant. NWFPE does sign, most, least. */
+ memcpy (buf, reg_data, 4);
+ memcpy (buf + 4, reg_data + 8, 4);
+ memcpy (buf + 8, reg_data + 4, 4);
+ break;
+ default:
+ break;
+ }
+
+ regcache_raw_supply (regcache, regno, buf);
+}
+
+void
+collect_nwfpe_register (const struct regcache *regcache, int regno,
+ gdb_byte *regs)
+{
+ gdb_byte *reg_data;
+ gdb_byte reg_tag;
+ gdb_byte buf[FP_REGISTER_SIZE];
+
+ regcache_raw_collect (regcache, regno, buf);
+
+ /* NOTE drow/2006-06-07: This code uses the tag already in the
+ register buffer. I've preserved that when moving the code
+ from the native file to the target file. But this doesn't
+ always make sense. */
+
+ reg_data = regs + (regno - ARM_F0_REGNUM) * FP_REGISTER_SIZE;
+ reg_tag = regs[(regno - ARM_F0_REGNUM) + NWFPE_TAGS_OFFSET];
+
+ switch (reg_tag)
+ {
+ case typeSingle:
+ memcpy (reg_data, buf, 4);
+ break;
+ case typeDouble:
+ memcpy (reg_data, buf + 4, 4);
+ memcpy (reg_data + 4, buf, 4);
+ break;
+ case typeExtended:
+ memcpy (reg_data, buf, 4);
+ memcpy (reg_data + 4, buf + 8, 4);
+ memcpy (reg_data + 8, buf + 4, 4);
+ break;
+ default:
+ break;
+ }
+}
+
+void
+arm_linux_supply_nwfpe (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *regs_buf, size_t len)
+{
+ const gdb_byte *regs = regs_buf;
+ int regno;
+
+ if (regnum == ARM_FPS_REGNUM || regnum == -1)
+ regcache_raw_supply (regcache, ARM_FPS_REGNUM,
+ regs + NWFPE_FPSR_OFFSET);
+
+ for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)
+ if (regnum == -1 || regnum == regno)
+ supply_nwfpe_register (regcache, regno, regs);
+}
+
+void
+arm_linux_collect_nwfpe (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *regs_buf, size_t len)
+{
+ gdb_byte *regs = regs_buf;
+ int regno;
+
+ for (regno = ARM_F0_REGNUM; regno <= ARM_F7_REGNUM; regno++)
+ if (regnum == -1 || regnum == regno)
+ collect_nwfpe_register (regcache, regno, regs);
+
+ if (regnum == ARM_FPS_REGNUM || regnum == -1)
+ regcache_raw_collect (regcache, ARM_FPS_REGNUM,
+ regs + INT_REGISTER_SIZE * ARM_FPS_REGNUM);
+}
+
+/* Return the appropriate register set for the core section identified
+ by SECT_NAME and SECT_SIZE. */
+
+static const struct regset *
+arm_linux_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name, size_t sect_size)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ if (strcmp (sect_name, ".reg") == 0
+ && sect_size == ARM_LINUX_SIZEOF_GREGSET)
+ {
+ if (tdep->gregset == NULL)
+ tdep->gregset = regset_alloc (gdbarch, arm_linux_supply_gregset,
+ arm_linux_collect_gregset);
+ return tdep->gregset;
+ }
+
+ if (strcmp (sect_name, ".reg2") == 0
+ && sect_size == ARM_LINUX_SIZEOF_NWFPE)
+ {
+ if (tdep->fpregset == NULL)
+ tdep->fpregset = regset_alloc (gdbarch, arm_linux_supply_nwfpe,
+ arm_linux_collect_nwfpe);
+ return tdep->fpregset;
+ }
+
+ return NULL;
+}
+
+/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
+ and return 1. Return 0 if it is not a rt_sigreturn/sigreturn
+ syscall. */
+static int
+arm_linux_sigreturn_return_addr (struct frame_info *frame,
+ unsigned long svc_number,
+ CORE_ADDR *pc)
+{
+ /* Is this a sigreturn or rt_sigreturn syscall? */
+ if (svc_number == 119 || svc_number == 173)
+ {
+ if (get_frame_type (frame) == SIGTRAMP_FRAME)
+ {
+ *pc = frame_unwind_caller_pc (frame);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* When FRAME is at a syscall instruction, return the PC of the next
+ instruction to be executed. */
+
+static CORE_ADDR
+arm_linux_syscall_next_pc (struct frame_info *frame)
+{
+ CORE_ADDR pc = get_frame_pc (frame);
+ CORE_ADDR return_addr = 0;
+ int is_thumb = arm_frame_is_thumb (frame);
+ ULONGEST svc_number = 0;
+ int is_sigreturn = 0;
+
+ if (is_thumb)
+ {
+ svc_number = get_frame_register_unsigned (frame, 7);
+ }
+ else
+ {
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ enum bfd_endian byte_order_for_code =
+ gdbarch_byte_order_for_code (gdbarch);
+ unsigned long this_instr =
+ read_memory_unsigned_integer (pc, 4, byte_order_for_code);
+
+ unsigned long svc_operand = (0x00ffffff & this_instr);
+ if (svc_operand) /* OABI. */
+ {
+ svc_number = svc_operand - 0x900000;
+ }
+ else /* EABI. */
+ {
+ svc_number = get_frame_register_unsigned (frame, 7);
+ }
+ }
+
+ is_sigreturn = arm_linux_sigreturn_return_addr (frame, svc_number,
+ &return_addr);
+
+ if (is_sigreturn)
+ return return_addr;
+
+ if (is_thumb)
+ {
+ return_addr = pc + 2;
+ /* Addresses for calling Thumb functions have the bit 0 set. */
+ return_addr |= 1;
+ }
+ else
+ {
+ return_addr = pc + 4;
+ }
+
+ return return_addr;
+}
+
+
+/* Insert a single step breakpoint at the next executed instruction. */
+
+static int
+arm_linux_software_single_step (struct frame_info *frame)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct address_space *aspace = get_frame_address_space (frame);
+ CORE_ADDR next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
+
+ /* The Linux kernel offers some user-mode helpers in a high page. We can
+ not read this page (as of 2.6.23), and even if we could then we couldn't
+ set breakpoints in it, and even if we could then the atomic operations
+ would fail when interrupted. They are all called as functions and return
+ to the address in LR, so step to there instead. */
+ if (next_pc > 0xffff0000)
+ next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
+
+ insert_single_step_breakpoint (gdbarch, aspace, next_pc);
+
+ return 1;
+}
+
+/* Support for displaced stepping of Linux SVC instructions. */
+
+static void
+arm_linux_cleanup_svc (struct gdbarch *gdbarch,
+ struct regcache *regs,
+ struct displaced_step_closure *dsc)
+{
+ CORE_ADDR from = dsc->insn_addr;
+ ULONGEST apparent_pc;
+ int within_scratch;
+
+ regcache_cooked_read_unsigned (regs, ARM_PC_REGNUM, &apparent_pc);
+
+ within_scratch = (apparent_pc >= dsc->scratch_base
+ && apparent_pc < (dsc->scratch_base
+ + DISPLACED_MODIFIED_INSNS * 4 + 4));
+
+ if (debug_displaced)
+ {
+ fprintf_unfiltered (gdb_stdlog, "displaced: PC is apparently %.8lx after "
+ "SVC step ", (unsigned long) apparent_pc);
+ if (within_scratch)
+ fprintf_unfiltered (gdb_stdlog, "(within scratch space)\n");
+ else
+ fprintf_unfiltered (gdb_stdlog, "(outside scratch space)\n");
+ }
+
+ if (within_scratch)
+ displaced_write_reg (regs, dsc, ARM_PC_REGNUM, from + 4, BRANCH_WRITE_PC);
+}
+
+static int
+arm_linux_copy_svc (struct gdbarch *gdbarch, uint32_t insn, CORE_ADDR to,
+ struct regcache *regs, struct displaced_step_closure *dsc)
+{
+ CORE_ADDR from = dsc->insn_addr;
+ CORE_ADDR return_to = 0;
+
+ struct frame_info *frame;
+ unsigned int svc_number = displaced_read_reg (regs, from, 7);
+ int is_sigreturn = 0;
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: copying Linux svc insn %.8lx\n",
+ (unsigned long) insn);
+
+ frame = get_current_frame ();
+
+ is_sigreturn = arm_linux_sigreturn_return_addr(frame, svc_number,
+ &return_to);
+ if (is_sigreturn)
+ {
+ struct symtab_and_line sal;
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: found "
+ "sigreturn/rt_sigreturn SVC call. PC in frame = %lx\n",
+ (unsigned long) get_frame_pc (frame));
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: unwind pc = %lx. "
+ "Setting momentary breakpoint.\n", (unsigned long) return_to);
+
+ gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
+
+ sal = find_pc_line (return_to, 0);
+ sal.pc = return_to;
+ sal.section = find_pc_overlay (return_to);
+ sal.explicit_pc = 1;
+
+ frame = get_prev_frame (frame);
+
+ if (frame)
+ {
+ inferior_thread ()->step_resume_breakpoint
+ = set_momentary_breakpoint (gdbarch, sal, get_frame_id (frame),
+ bp_step_resume);
+
+ /* We need to make sure we actually insert the momentary
+ breakpoint set above. */
+ insert_breakpoints ();
+ }
+ else if (debug_displaced)
+ fprintf_unfiltered (gdb_stderr, "displaced: couldn't find previous "
+ "frame to set momentary breakpoint for "
+ "sigreturn/rt_sigreturn\n");
+ }
+ else if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: sigreturn/rt_sigreturn "
+ "SVC call not in signal trampoline frame\n");
+
+
+ /* Preparation: If we detect sigreturn, set momentary breakpoint at resume
+ location, else nothing.
+ Insn: unmodified svc.
+ Cleanup: if pc lands in scratch space, pc <- insn_addr + 4
+ else leave pc alone. */
+
+ dsc->modinsn[0] = insn;
+
+ dsc->cleanup = &arm_linux_cleanup_svc;
+ /* Pretend we wrote to the PC, so cleanup doesn't set PC to the next
+ instruction. */
+ dsc->wrote_to_pc = 1;
+
+ return 0;
+}
+
+
+/* The following two functions implement single-stepping over calls to Linux
+ kernel helper routines, which perform e.g. atomic operations on architecture
+ variants which don't support them natively.
+
+ When this function is called, the PC will be pointing at the kernel helper
+ (at an address inaccessible to GDB), and r14 will point to the return
+ address. Displaced stepping always executes code in the copy area:
+ so, make the copy-area instruction branch back to the kernel helper (the
+ "from" address), and make r14 point to the breakpoint in the copy area. In
+ that way, we regain control once the kernel helper returns, and can clean
+ up appropriately (as if we had just returned from the kernel helper as it
+ would have been called from the non-displaced location). */
+
+static void
+cleanup_kernel_helper_return (struct gdbarch *gdbarch,
+ struct regcache *regs,
+ struct displaced_step_closure *dsc)
+{
+ displaced_write_reg (regs, dsc, ARM_LR_REGNUM, dsc->tmp[0], CANNOT_WRITE_PC);
+ displaced_write_reg (regs, dsc, ARM_PC_REGNUM, dsc->tmp[0], BRANCH_WRITE_PC);
+}
+
+static void
+arm_catch_kernel_helper_return (struct gdbarch *gdbarch, CORE_ADDR from,
+ CORE_ADDR to, struct regcache *regs,
+ struct displaced_step_closure *dsc)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ dsc->numinsns = 1;
+ dsc->insn_addr = from;
+ dsc->cleanup = &cleanup_kernel_helper_return;
+ /* Say we wrote to the PC, else cleanup will set PC to the next
+ instruction in the helper, which isn't helpful. */
+ dsc->wrote_to_pc = 1;
+
+ /* Preparation: tmp[0] <- r14
+ r14 <- <scratch space>+4
+ *(<scratch space>+8) <- from
+ Insn: ldr pc, [r14, #4]
+ Cleanup: r14 <- tmp[0], pc <- tmp[0]. */
+
+ dsc->tmp[0] = displaced_read_reg (regs, from, ARM_LR_REGNUM);
+ displaced_write_reg (regs, dsc, ARM_LR_REGNUM, (ULONGEST) to + 4,
+ CANNOT_WRITE_PC);
+ write_memory_unsigned_integer (to + 8, 4, byte_order, from);
+
+ dsc->modinsn[0] = 0xe59ef004; /* ldr pc, [lr, #4]. */
+}
+
+/* Linux-specific displaced step instruction copying function. Detects when
+ the program has stepped into a Linux kernel helper routine (which must be
+ handled as a special case), falling back to arm_displaced_step_copy_insn()
+ if it hasn't. */
+
+static struct displaced_step_closure *
+arm_linux_displaced_step_copy_insn (struct gdbarch *gdbarch,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
+{
+ struct displaced_step_closure *dsc
+ = xmalloc (sizeof (struct displaced_step_closure));
+
+ /* Detect when we enter an (inaccessible by GDB) Linux kernel helper, and
+ stop at the return location. */
+ if (from > 0xffff0000)
+ {
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: detected kernel helper "
+ "at %.8lx\n", (unsigned long) from);
+
+ arm_catch_kernel_helper_return (gdbarch, from, to, regs, dsc);
+ }
+ else
+ {
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ uint32_t insn = read_memory_unsigned_integer (from, 4, byte_order);
+
+ if (debug_displaced)
+ fprintf_unfiltered (gdb_stdlog, "displaced: stepping insn %.8lx "
+ "at %.8lx\n", (unsigned long) insn,
+ (unsigned long) from);
+
+ /* Override the default handling of SVC instructions. */
+ dsc->u.svc.copy_svc_os = arm_linux_copy_svc;
+
+ arm_process_displaced_insn (gdbarch, insn, from, to, regs, dsc);
+ }
+
+ arm_displaced_init_closure (gdbarch, from, to, dsc);
+
+ return dsc;
+}
+
static void
arm_linux_init_abi (struct gdbarch_info info,
struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ linux_init_abi (info, gdbarch);
+
tdep->lowest_pc = 0x8000;
if (info.byte_order == BFD_ENDIAN_BIG)
{
else
tdep->arm_breakpoint = arm_linux_arm_be_breakpoint;
tdep->thumb_breakpoint = arm_linux_thumb_be_breakpoint;
+ tdep->thumb2_breakpoint = arm_linux_thumb2_be_breakpoint;
}
else
{
else
tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
tdep->thumb_breakpoint = arm_linux_thumb_le_breakpoint;
+ tdep->thumb2_breakpoint = arm_linux_thumb2_le_breakpoint;
}
tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint);
tdep->thumb_breakpoint_size = sizeof (arm_linux_thumb_le_breakpoint);
+ tdep->thumb2_breakpoint_size = sizeof (arm_linux_thumb2_le_breakpoint);
if (tdep->fp_model == ARM_FLOAT_AUTO)
tdep->fp_model = ARM_FLOAT_FPA;
- tdep->jb_pc = ARM_LINUX_JB_PC;
+ switch (tdep->fp_model)
+ {
+ case ARM_FLOAT_FPA:
+ tdep->jb_pc = ARM_LINUX_JB_PC_FPA;
+ break;
+ case ARM_FLOAT_SOFT_FPA:
+ case ARM_FLOAT_SOFT_VFP:
+ case ARM_FLOAT_VFP:
+ tdep->jb_pc = ARM_LINUX_JB_PC_EABI;
+ break;
+ default:
+ internal_error
+ (__FILE__, __LINE__,
+ _("arm_linux_init_abi: Floating point model not supported"));
+ break;
+ }
tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE;
set_solib_svr4_fetch_link_map_offsets
(gdbarch, svr4_ilp32_fetch_link_map_offsets);
- /* The following override shouldn't be needed. */
- set_gdbarch_deprecated_extract_return_value (gdbarch, arm_linux_extract_return_value);
+ /* Single stepping. */
+ set_gdbarch_software_single_step (gdbarch, arm_linux_software_single_step);
/* Shared library handling. */
set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
&arm_eabi_linux_sigreturn_tramp_frame);
tramp_frame_prepend_unwinder (gdbarch,
&arm_eabi_linux_rt_sigreturn_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &arm_linux_restart_syscall_tramp_frame);
+
+ /* Core file support. */
+ set_gdbarch_regset_from_core_section (gdbarch,
+ arm_linux_regset_from_core_section);
+
+ set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type);
+
+ /* Displaced stepping. */
+ set_gdbarch_displaced_step_copy_insn (gdbarch,
+ arm_linux_displaced_step_copy_insn);
+ set_gdbarch_displaced_step_fixup (gdbarch, arm_displaced_step_fixup);
+ set_gdbarch_displaced_step_free_closure (gdbarch,
+ simple_displaced_step_free_closure);
+ set_gdbarch_displaced_step_location (gdbarch, displaced_step_at_entry_point);
+
+
+ tdep->syscall_next_pc = arm_linux_syscall_next_pc;
}
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern initialize_file_ftype _initialize_arm_linux_tdep;
+
void
_initialize_arm_linux_tdep (void)
{