/* GNU/Linux on ARM target support.
- Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GDB.
#include "frame.h"
#include "regcache.h"
#include "doublest.h"
+#include "solib-svr4.h"
+#include "osabi.h"
#include "arm-tdep.h"
-/* For arm_linux_skip_solib_resolver. */
+/* For shared library handling. */
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
-/* Under ARM Linux the traditional way of performing a breakpoint is to
- execute a particular software interrupt, rather than use a particular
- undefined instruction to provoke a trap. Upon exection of the software
- interrupt the kernel stops the inferior with a SIGTRAP, and wakes the
- debugger. Since ARM Linux is little endian, and doesn't support Thumb
- at the moment we only override the ARM little-endian breakpoint. */
+/* Under ARM GNU/Linux the traditional way of performing a breakpoint
+ is to execute a particular software interrupt, rather than use a
+ particular undefined instruction to provoke a trap. Upon exection
+ of the software interrupt the kernel stops the inferior with a
+ SIGTRAP, and wakes the debugger. Since ARM GNU/Linux doesn't support
+ Thumb at the moment we only override the ARM breakpoints. */
-static const char arm_linux_arm_le_breakpoint[] = {0x01,0x00,0x9f,0xef};
+static const char arm_linux_arm_le_breakpoint[] = { 0x01, 0x00, 0x9f, 0xef };
-/* CALL_DUMMY_WORDS:
+static const char arm_linux_arm_be_breakpoint[] = { 0xef, 0x9f, 0x00, 0x01 };
+
+/* DEPRECATED_CALL_DUMMY_WORDS:
This sequence of words is the instructions
mov lr, pc
};
/* Description of the longjmp buffer. */
-#define JB_ELEMENT_SIZE INT_REGISTER_RAW_SIZE
-#define JB_PC 21
+#define ARM_LINUX_JB_ELEMENT_SIZE INT_REGISTER_RAW_SIZE
+#define ARM_LINUX_JB_PC 21
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. */
-
-void
+/* FIXME rearnsha/2002-02-23: This function shouldn't be necessary.
+ The ARM generic one should be able to handle the model used by
+ linux and the low-level formatting of the registers should be
+ hidden behind the regcache abstraction. */
+static void
arm_linux_extract_return_value (struct type *type,
- char regbuf[REGISTER_BYTES],
+ char regbuf[],
char *valbuf)
{
/* ScottB: This needs to be looked at to handle the different
- floating point emulators on ARM Linux. Right now the code
+ floating point emulators on ARM GNU/Linux. Right now the code
assumes that fetch inferior registers does the right thing for
GDB. I suspect this won't handle NWFPE registers correctly, nor
will the default ARM version (arm_extract_return_value()). */
int regnum = ((TYPE_CODE_FLT == TYPE_CODE (type))
? ARM_F0_REGNUM : ARM_A1_REGNUM);
- memcpy (valbuf, ®buf[REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
+ memcpy (valbuf, ®buf[DEPRECATED_REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
}
/* Note: ScottB
#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
-CORE_ADDR
+static CORE_ADDR
arm_linux_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
/* Walk through the list of args and determine how large a temporary
stack is required. Need to take care here as structs may be
passed on the stack, and we have to to push them. */
- nstack_size = -4 * REGISTER_SIZE; /* Some arguments go into A1-A4. */
+ nstack_size = -4 * DEPRECATED_REGISTER_SIZE; /* Some arguments go into A1-A4. */
if (struct_return) /* The struct address goes in A1. */
- nstack_size += REGISTER_SIZE;
+ nstack_size += DEPRECATED_REGISTER_SIZE;
/* Walk through the arguments and add their size to nstack_size. */
for (argnum = 0; argnum < nargs; argnum++)
/* ANSI C code passes float arguments as integers, K&R code
passes float arguments as doubles. Correct for this here. */
- if (TYPE_CODE_FLT == TYPE_CODE (arg_type) && REGISTER_SIZE == len)
+ if (TYPE_CODE_FLT == TYPE_CODE (arg_type) && DEPRECATED_REGISTER_SIZE == len)
nstack_size += FP_REGISTER_VIRTUAL_SIZE;
else
nstack_size += len;
.stabs records the type as FP_FLOAT. In this latter case
the compiler converts the float arguments to double before
calling the function. */
- if (TYPE_CODE_FLT == typecode && REGISTER_SIZE == len)
+ if (TYPE_CODE_FLT == typecode && DEPRECATED_REGISTER_SIZE == len)
{
DOUBLEST dblval;
- dblval = extract_floating (val, len);
+ dblval = deprecated_extract_floating (val, len);
len = TARGET_DOUBLE_BIT / TARGET_CHAR_BIT;
val = alloca (len);
- store_floating (val, len, dblval);
+ deprecated_store_floating (val, len, dblval);
}
/* If the argument is a pointer to a function, and it is a Thumb
&& NULL != target_type
&& TYPE_CODE_FUNC == TYPE_CODE (target_type))
{
- CORE_ADDR regval = extract_address (val, len);
+ CORE_ADDR regval = extract_unsigned_integer (val, len);
if (arm_pc_is_thumb (regval))
- store_address (val, len, MAKE_THUMB_ADDR (regval));
+ store_unsigned_integer (val, len, MAKE_THUMB_ADDR (regval));
}
/* Copy the argument to general registers or the stack in
registers and stack. */
while (len > 0)
{
- int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE;
+ int partial_len = len < DEPRECATED_REGISTER_SIZE ? len : DEPRECATED_REGISTER_SIZE;
if (argreg <= ARM_LAST_ARG_REGNUM)
{
/* It's an argument being passed in a general register. */
- regval = extract_address (val, partial_len);
+ regval = extract_unsigned_integer (val, partial_len);
write_register (argreg++, regval);
}
else
{
/* Push the arguments onto the stack. */
- write_memory ((CORE_ADDR) fp, val, REGISTER_SIZE);
- fp += REGISTER_SIZE;
+ write_memory ((CORE_ADDR) fp, val, DEPRECATED_REGISTER_SIZE);
+ fp += DEPRECATED_REGISTER_SIZE;
}
len -= partial_len;
}
/*
- Dynamic Linking on ARM Linux
- ----------------------------
+ Dynamic Linking on ARM GNU/Linux
+ --------------------------------
Note: PLT = procedure linkage table
GOT = global offset table
When the executable or library is first loaded, each GOT entry is
initialized to point to the code which implements dynamic name
resolution and code finding. This is normally a function in the
- program interpreter (on ARM Linux this is usually ld-linux.so.2,
- but it does not have to be). On the first invocation, the function
- is located and the GOT entry is replaced with the real function
- address. Subsequent calls go through steps 1, 2 and 3 and end up
- calling the real code.
+ program interpreter (on ARM GNU/Linux this is usually
+ ld-linux.so.2, but it does not have to be). On the first
+ invocation, the function is located and the GOT entry is replaced
+ with the real function address. Subsequent calls go through steps
+ 1, 2 and 3 and end up calling the real code.
1) In the code:
ALL_OBJFILE_MSYMBOLS (objfile, msym)
{
- if (SYMBOL_NAME (msym)
- && STREQ (SYMBOL_NAME (msym), name))
+ if (DEPRECATED_SYMBOL_NAME (msym)
+ && strcmp (DEPRECATED_SYMBOL_NAME (msym), name) == 0)
{
*objfile_p = objfile;
return msym;
}
+/* Fetch, and possibly build, an appropriate link_map_offsets structure
+ for ARM linux targets using the struct offsets defined in <link.h>.
+ Note, however, that link.h is not actually referred to in this file.
+ Instead, the relevant structs offsets were obtained from examining
+ link.h. (We can't refer to link.h from this file because the host
+ system won't necessarily have it, or if it does, the structs which
+ it defines will refer to the host system, not the target). */
+
+static struct link_map_offsets *
+arm_linux_svr4_fetch_link_map_offsets (void)
+{
+ static struct link_map_offsets lmo;
+ static struct link_map_offsets *lmp = 0;
+
+ if (lmp == 0)
+ {
+ lmp = &lmo;
+
+ lmo.r_debug_size = 8; /* Actual size is 20, but this is all we
+ need. */
+
+ lmo.r_map_offset = 4;
+ lmo.r_map_size = 4;
+
+ lmo.link_map_size = 20; /* Actual size is 552, but this is all we
+ need. */
+
+ lmo.l_addr_offset = 0;
+ lmo.l_addr_size = 4;
+
+ lmo.l_name_offset = 4;
+ lmo.l_name_size = 4;
+
+ lmo.l_next_offset = 12;
+ lmo.l_next_size = 4;
+
+ lmo.l_prev_offset = 16;
+ lmo.l_prev_size = 4;
+ }
+
+ return lmp;
+}
+
static CORE_ADDR
skip_hurd_resolver (CORE_ADDR pc)
{
It's kind of gross to do all these checks every time we're
called, since they don't change once the executable has gotten
started. But this is only a temporary hack --- upcoming versions
- of Linux will provide a portable, efficient interface for
+ of GNU/Linux will provide a portable, efficient interface for
debugging programs that use shared libraries. */
struct objfile *objfile;
= lookup_minimal_symbol ("fixup", NULL, objfile);
if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc)
- return (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ return (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
}
return 0;
inst = read_memory_integer (pc, 4);
- if (inst == ARM_LINUX_SIGRETURN_INSTR || inst == ARM_LINUX_RT_SIGRETURN_INSTR)
+ if (inst == ARM_LINUX_SIGRETURN_INSTR
+ || inst == ARM_LINUX_RT_SIGRETURN_INSTR)
{
CORE_ADDR sigcontext_addr;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
tdep->lowest_pc = 0x8000;
- tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
+ if (info.byte_order == BFD_ENDIAN_BIG)
+ tdep->arm_breakpoint = arm_linux_arm_be_breakpoint;
+ else
+ tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint);
- tdep->jb_pc = JB_PC;
- tdep->jb_elt_size = JB_ELEMENT_SIZE;
+ tdep->fp_model = ARM_FLOAT_FPA;
+
+ tdep->jb_pc = ARM_LINUX_JB_PC;
+ tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE;
+
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, arm_linux_svr4_fetch_link_map_offsets);
+
+ set_gdbarch_deprecated_call_dummy_words (gdbarch, arm_linux_call_dummy_words);
+ set_gdbarch_deprecated_sizeof_call_dummy_words (gdbarch, sizeof (arm_linux_call_dummy_words));
+
+ /* The following two overrides shouldn't be needed. */
+ set_gdbarch_deprecated_extract_return_value (gdbarch, arm_linux_extract_return_value);
+ set_gdbarch_deprecated_push_arguments (gdbarch, arm_linux_push_arguments);
+
+ /* Shared library handling. */
+ set_gdbarch_in_solib_call_trampoline (gdbarch, in_plt_section);
+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
}
void
_initialize_arm_linux_tdep (void)
{
- arm_gdbarch_register_os_abi (ARM_ABI_LINUX, arm_linux_init_abi);
+ gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_LINUX,
+ arm_linux_init_abi);
}