/* GNU/Linux on ARM target support.
- Copyright 1999, 2000 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GDB.
#include "value.h"
#include "gdbtypes.h"
#include "floatformat.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "regcache.h"
+#include "doublest.h"
+#include "solib-svr4.h"
+#include "osabi.h"
-/* For arm_linux_skip_solib_resolver. */
+#include "arm-tdep.h"
+
+/* For shared library handling. */
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
-#ifdef GET_LONGJMP_TARGET
+/* Under ARM GNU/Linux the traditional way of performing a breakpoint
+ is to execute a particular software interrupt, rather than use a
+ particular undefined instruction to provoke a trap. Upon exection
+ of the software interrupt the kernel stops the inferior with a
+ SIGTRAP, and wakes the debugger. Since ARM GNU/Linux doesn't support
+ Thumb at the moment we only override the ARM breakpoints. */
-/* Figure out where the longjmp will land. We expect that we have
- just entered longjmp and haven't yet altered r0, r1, so the
- arguments are still in the registers. (A1_REGNUM) points at the
- jmp_buf structure from which we extract the pc (JB_PC) that we will
- land at. The pc is copied into ADDR. This routine returns true on
- success. */
+static const char arm_linux_arm_le_breakpoint[] = { 0x01, 0x00, 0x9f, 0xef };
-#define LONGJMP_TARGET_SIZE sizeof(int)
-#define JB_ELEMENT_SIZE sizeof(int)
-#define JB_SL 18
-#define JB_FP 19
-#define JB_SP 20
-#define JB_PC 21
+static const char arm_linux_arm_be_breakpoint[] = { 0xef, 0x9f, 0x00, 0x01 };
-int
-arm_get_longjmp_target (CORE_ADDR * pc)
-{
- CORE_ADDR jb_addr;
- char buf[LONGJMP_TARGET_SIZE];
+/* DEPRECATED_CALL_DUMMY_WORDS:
+ This sequence of words is the instructions
- jb_addr = read_register (A1_REGNUM);
+ mov lr, pc
+ mov pc, r4
+ swi bkpt_swi
- if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
- LONGJMP_TARGET_SIZE))
- return 0;
+ Note this is 12 bytes. */
- *pc = extract_address (buf, LONGJMP_TARGET_SIZE);
- return 1;
-}
+LONGEST arm_linux_call_dummy_words[] =
+{
+ 0xe1a0e00f, 0xe1a0f004, 0xef9f001
+};
-#endif /* GET_LONGJMP_TARGET */
+/* Description of the longjmp buffer. */
+#define ARM_LINUX_JB_ELEMENT_SIZE INT_REGISTER_RAW_SIZE
+#define ARM_LINUX_JB_PC 21
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. */
-
-void
+/* FIXME rearnsha/2002-02-23: This function shouldn't be necessary.
+ The ARM generic one should be able to handle the model used by
+ linux and the low-level formatting of the registers should be
+ hidden behind the regcache abstraction. */
+static void
arm_linux_extract_return_value (struct type *type,
- char regbuf[REGISTER_BYTES],
+ char regbuf[],
char *valbuf)
{
/* ScottB: This needs to be looked at to handle the different
- floating point emulators on ARM Linux. Right now the code
+ floating point emulators on ARM GNU/Linux. Right now the code
assumes that fetch inferior registers does the right thing for
GDB. I suspect this won't handle NWFPE registers correctly, nor
will the default ARM version (arm_extract_return_value()). */
- int regnum = (TYPE_CODE_FLT == TYPE_CODE (type)) ? F0_REGNUM : A1_REGNUM;
- memcpy (valbuf, ®buf[REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
+ int regnum = ((TYPE_CODE_FLT == TYPE_CODE (type))
+ ? ARM_F0_REGNUM : ARM_A1_REGNUM);
+ memcpy (valbuf, ®buf[DEPRECATED_REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
}
/* Note: ScottB
#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
-CORE_ADDR
-arm_linux_push_arguments (int nargs, value_ptr * args, CORE_ADDR sp,
+static CORE_ADDR
+arm_linux_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
char *fp;
/* Walk through the list of args and determine how large a temporary
stack is required. Need to take care here as structs may be
passed on the stack, and we have to to push them. */
- nstack_size = -4 * REGISTER_SIZE; /* Some arguments go into A1-A4. */
+ nstack_size = -4 * DEPRECATED_REGISTER_SIZE; /* Some arguments go into A1-A4. */
if (struct_return) /* The struct address goes in A1. */
- nstack_size += REGISTER_SIZE;
+ nstack_size += DEPRECATED_REGISTER_SIZE;
/* Walk through the arguments and add their size to nstack_size. */
for (argnum = 0; argnum < nargs; argnum++)
/* ANSI C code passes float arguments as integers, K&R code
passes float arguments as doubles. Correct for this here. */
- if (TYPE_CODE_FLT == TYPE_CODE (arg_type) && REGISTER_SIZE == len)
+ if (TYPE_CODE_FLT == TYPE_CODE (arg_type) && DEPRECATED_REGISTER_SIZE == len)
nstack_size += FP_REGISTER_VIRTUAL_SIZE;
else
nstack_size += len;
}
/* Initialize the integer argument register pointer. */
- argreg = A1_REGNUM;
+ argreg = ARM_A1_REGNUM;
/* The struct_return pointer occupies the first parameter passing
register. */
{
int len;
char *val;
- double dbl_arg;
CORE_ADDR regval;
enum type_code typecode;
struct type *arg_type, *target_type;
.stabs records the type as FP_FLOAT. In this latter case
the compiler converts the float arguments to double before
calling the function. */
- if (TYPE_CODE_FLT == typecode && REGISTER_SIZE == len)
+ if (TYPE_CODE_FLT == typecode && DEPRECATED_REGISTER_SIZE == len)
{
- /* Float argument in buffer is in host format. Read it and
- convert to DOUBLEST, and store it in target double. */
DOUBLEST dblval;
-
+ dblval = deprecated_extract_floating (val, len);
len = TARGET_DOUBLE_BIT / TARGET_CHAR_BIT;
- floatformat_to_doublest (HOST_FLOAT_FORMAT, val, &dblval);
- store_floating (&dbl_arg, len, dblval);
- val = (char *) &dbl_arg;
+ val = alloca (len);
+ deprecated_store_floating (val, len, dblval);
}
/* If the argument is a pointer to a function, and it is a Thumb
&& NULL != target_type
&& TYPE_CODE_FUNC == TYPE_CODE (target_type))
{
- CORE_ADDR regval = extract_address (val, len);
+ CORE_ADDR regval = extract_unsigned_integer (val, len);
if (arm_pc_is_thumb (regval))
- store_address (val, len, MAKE_THUMB_ADDR (regval));
+ store_unsigned_integer (val, len, MAKE_THUMB_ADDR (regval));
}
/* Copy the argument to general registers or the stack in
registers and stack. */
while (len > 0)
{
- int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE;
+ int partial_len = len < DEPRECATED_REGISTER_SIZE ? len : DEPRECATED_REGISTER_SIZE;
if (argreg <= ARM_LAST_ARG_REGNUM)
{
/* It's an argument being passed in a general register. */
- regval = extract_address (val, partial_len);
+ regval = extract_unsigned_integer (val, partial_len);
write_register (argreg++, regval);
}
else
{
/* Push the arguments onto the stack. */
- write_memory ((CORE_ADDR) fp, val, REGISTER_SIZE);
- fp += REGISTER_SIZE;
+ write_memory ((CORE_ADDR) fp, val, DEPRECATED_REGISTER_SIZE);
+ fp += DEPRECATED_REGISTER_SIZE;
}
len -= partial_len;
}
/*
- Dynamic Linking on ARM Linux
- ----------------------------
+ Dynamic Linking on ARM GNU/Linux
+ --------------------------------
Note: PLT = procedure linkage table
GOT = global offset table
When the executable or library is first loaded, each GOT entry is
initialized to point to the code which implements dynamic name
resolution and code finding. This is normally a function in the
- program interpreter (on ARM Linux this is usually ld-linux.so.2,
- but it does not have to be). On the first invocation, the function
- is located and the GOT entry is replaced with the real function
- address. Subsequent calls go through steps 1, 2 and 3 and end up
- calling the real code.
+ program interpreter (on ARM GNU/Linux this is usually
+ ld-linux.so.2, but it does not have to be). On the first
+ invocation, the function is located and the GOT entry is replaced
+ with the real function address. Subsequent calls go through steps
+ 1, 2 and 3 and end up calling the real code.
1) In the code:
ALL_OBJFILE_MSYMBOLS (objfile, msym)
{
- if (SYMBOL_NAME (msym)
- && STREQ (SYMBOL_NAME (msym), name))
+ if (DEPRECATED_SYMBOL_NAME (msym)
+ && strcmp (DEPRECATED_SYMBOL_NAME (msym), name) == 0)
{
*objfile_p = objfile;
return msym;
}
+/* Fetch, and possibly build, an appropriate link_map_offsets structure
+ for ARM linux targets using the struct offsets defined in <link.h>.
+ Note, however, that link.h is not actually referred to in this file.
+ Instead, the relevant structs offsets were obtained from examining
+ link.h. (We can't refer to link.h from this file because the host
+ system won't necessarily have it, or if it does, the structs which
+ it defines will refer to the host system, not the target). */
+
+static struct link_map_offsets *
+arm_linux_svr4_fetch_link_map_offsets (void)
+{
+ static struct link_map_offsets lmo;
+ static struct link_map_offsets *lmp = 0;
+
+ if (lmp == 0)
+ {
+ lmp = &lmo;
+
+ lmo.r_debug_size = 8; /* Actual size is 20, but this is all we
+ need. */
+
+ lmo.r_map_offset = 4;
+ lmo.r_map_size = 4;
+
+ lmo.link_map_size = 20; /* Actual size is 552, but this is all we
+ need. */
+
+ lmo.l_addr_offset = 0;
+ lmo.l_addr_size = 4;
+
+ lmo.l_name_offset = 4;
+ lmo.l_name_size = 4;
+
+ lmo.l_next_offset = 12;
+ lmo.l_next_size = 4;
+
+ lmo.l_prev_offset = 16;
+ lmo.l_prev_size = 4;
+ }
+
+ return lmp;
+}
+
static CORE_ADDR
skip_hurd_resolver (CORE_ADDR pc)
{
It's kind of gross to do all these checks every time we're
called, since they don't change once the executable has gotten
started. But this is only a temporary hack --- upcoming versions
- of Linux will provide a portable, efficient interface for
+ of GNU/Linux will provide a portable, efficient interface for
debugging programs that use shared libraries. */
struct objfile *objfile;
if (resolver)
{
struct minimal_symbol *fixup
- = lookup_minimal_symbol ("fixup", 0, objfile);
+ = lookup_minimal_symbol ("fixup", NULL, objfile);
if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc)
- return (SAVED_PC_AFTER_CALL (get_current_frame ()));
+ return (DEPRECATED_SAVED_PC_AFTER_CALL (get_current_frame ()));
}
return 0;
/* Plug in functions for other kinds of resolvers here. */
result = skip_hurd_resolver (pc);
- printf ("Result = 0x%08x\n");
+
if (result)
return result;
-
return 0;
}
+/* The constants below were determined by examining the following files
+ in the linux kernel sources:
+
+ arch/arm/kernel/signal.c
+ - see SWI_SYS_SIGRETURN and SWI_SYS_RT_SIGRETURN
+ include/asm-arm/unistd.h
+ - see __NR_sigreturn, __NR_rt_sigreturn, and __NR_SYSCALL_BASE */
+
+#define ARM_LINUX_SIGRETURN_INSTR 0xef900077
+#define ARM_LINUX_RT_SIGRETURN_INSTR 0xef9000ad
+
+/* arm_linux_in_sigtramp determines if PC points at one of the
+ instructions which cause control to return to the Linux kernel upon
+ return from a signal handler. FUNC_NAME is unused. */
+
+int
+arm_linux_in_sigtramp (CORE_ADDR pc, char *func_name)
+{
+ unsigned long inst;
+
+ inst = read_memory_integer (pc, 4);
+
+ return (inst == ARM_LINUX_SIGRETURN_INSTR
+ || inst == ARM_LINUX_RT_SIGRETURN_INSTR);
+
+}
+
+/* arm_linux_sigcontext_register_address returns the address in the
+ sigcontext of register REGNO given a stack pointer value SP and
+ program counter value PC. The value 0 is returned if PC is not
+ pointing at one of the signal return instructions or if REGNO is
+ not saved in the sigcontext struct. */
+
+CORE_ADDR
+arm_linux_sigcontext_register_address (CORE_ADDR sp, CORE_ADDR pc, int regno)
+{
+ unsigned long inst;
+ CORE_ADDR reg_addr = 0;
+
+ inst = read_memory_integer (pc, 4);
+
+ if (inst == ARM_LINUX_SIGRETURN_INSTR
+ || inst == ARM_LINUX_RT_SIGRETURN_INSTR)
+ {
+ CORE_ADDR sigcontext_addr;
+
+ /* The sigcontext structure is at different places for the two
+ signal return instructions. For ARM_LINUX_SIGRETURN_INSTR,
+ it starts at the SP value. For ARM_LINUX_RT_SIGRETURN_INSTR,
+ it is at SP+8. For the latter instruction, it may also be
+ the case that the address of this structure may be determined
+ by reading the 4 bytes at SP, but I'm not convinced this is
+ reliable.
+
+ In any event, these magic constants (0 and 8) may be
+ determined by examining struct sigframe and struct
+ rt_sigframe in arch/arm/kernel/signal.c in the Linux kernel
+ sources. */
+
+ if (inst == ARM_LINUX_RT_SIGRETURN_INSTR)
+ sigcontext_addr = sp + 8;
+ else /* inst == ARM_LINUX_SIGRETURN_INSTR */
+ sigcontext_addr = sp + 0;
+
+ /* The layout of the sigcontext structure for ARM GNU/Linux is
+ in include/asm-arm/sigcontext.h in the Linux kernel sources.
+
+ There are three 4-byte fields which precede the saved r0
+ field. (This accounts for the 12 in the code below.) The
+ sixteen registers (4 bytes per field) follow in order. The
+ PSR value follows the sixteen registers which accounts for
+ the constant 19 below. */
+
+ if (0 <= regno && regno <= ARM_PC_REGNUM)
+ reg_addr = sigcontext_addr + 12 + (4 * regno);
+ else if (regno == ARM_PS_REGNUM)
+ reg_addr = sigcontext_addr + 19 * 4;
+ }
+
+ return reg_addr;
+}
+
+static void
+arm_linux_init_abi (struct gdbarch_info info,
+ struct gdbarch *gdbarch)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ tdep->lowest_pc = 0x8000;
+ if (info.byte_order == BFD_ENDIAN_BIG)
+ tdep->arm_breakpoint = arm_linux_arm_be_breakpoint;
+ else
+ tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
+ tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint);
+
+ tdep->fp_model = ARM_FLOAT_FPA;
+
+ tdep->jb_pc = ARM_LINUX_JB_PC;
+ tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE;
+
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, arm_linux_svr4_fetch_link_map_offsets);
+
+ set_gdbarch_deprecated_call_dummy_words (gdbarch, arm_linux_call_dummy_words);
+ set_gdbarch_deprecated_sizeof_call_dummy_words (gdbarch, sizeof (arm_linux_call_dummy_words));
+
+ /* The following two overrides shouldn't be needed. */
+ set_gdbarch_deprecated_extract_return_value (gdbarch, arm_linux_extract_return_value);
+ set_gdbarch_deprecated_push_arguments (gdbarch, arm_linux_push_arguments);
+
+ /* Shared library handling. */
+ set_gdbarch_in_solib_call_trampoline (gdbarch, in_plt_section);
+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
+}
+
void
_initialize_arm_linux_tdep (void)
{
+ gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_LINUX,
+ arm_linux_init_abi);
}