/* GNU/Linux on ARM target support.
- Copyright 1999, 2000 Free Software Foundation, Inc.
+
+ Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "target.h"
#include "value.h"
#include "gdbtypes.h"
#include "floatformat.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "regcache.h"
+#include "doublest.h"
+#include "solib-svr4.h"
+#include "osabi.h"
+#include "trad-frame.h"
+#include "tramp-frame.h"
-#ifdef GET_LONGJMP_TARGET
+#include "arm-tdep.h"
+#include "glibc-tdep.h"
-/* Figure out where the longjmp will land. We expect that we have
- just entered longjmp and haven't yet altered r0, r1, so the
- arguments are still in the registers. (A1_REGNUM) points at the
- jmp_buf structure from which we extract the pc (JB_PC) that we will
- land at. The pc is copied into ADDR. This routine returns true on
- success. */
+#include "gdb_string.h"
-#define LONGJMP_TARGET_SIZE sizeof(int)
-#define JB_ELEMENT_SIZE sizeof(int)
-#define JB_SL 18
-#define JB_FP 19
-#define JB_SP 20
-#define JB_PC 21
+/* Under ARM GNU/Linux the traditional way of performing a breakpoint
+ is to execute a particular software interrupt, rather than use a
+ particular undefined instruction to provoke a trap. Upon exection
+ of the software interrupt the kernel stops the inferior with a
+ SIGTRAP, and wakes the debugger. */
-int
-arm_get_longjmp_target (CORE_ADDR * pc)
-{
- CORE_ADDR jb_addr;
- char buf[LONGJMP_TARGET_SIZE];
+static const char arm_linux_arm_le_breakpoint[] = { 0x01, 0x00, 0x9f, 0xef };
- jb_addr = read_register (A1_REGNUM);
+static const char arm_linux_arm_be_breakpoint[] = { 0xef, 0x9f, 0x00, 0x01 };
- if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
- LONGJMP_TARGET_SIZE))
- return 0;
+/* However, the EABI syscall interface (new in Nov. 2005) does not look at
+ the operand of the swi if old-ABI compatibility is disabled. Therefore,
+ use an undefined instruction instead. This is supported as of kernel
+ version 2.5.70 (May 2003), so should be a safe assumption for EABI
+ binaries. */
- *pc = extract_address (buf, LONGJMP_TARGET_SIZE);
- return 1;
-}
+static const char eabi_linux_arm_le_breakpoint[] = { 0xf0, 0x01, 0xf0, 0xe7 };
+
+static const char eabi_linux_arm_be_breakpoint[] = { 0xe7, 0xf0, 0x01, 0xf0 };
-#endif /* GET_LONGJMP_TARGET */
+/* All the kernels which support Thumb support using a specific undefined
+ instruction for the Thumb breakpoint. */
+
+static const char arm_linux_thumb_be_breakpoint[] = {0xde, 0x01};
+
+static const char arm_linux_thumb_le_breakpoint[] = {0x01, 0xde};
+
+/* Description of the longjmp buffer. */
+#define ARM_LINUX_JB_ELEMENT_SIZE INT_REGISTER_SIZE
+#define ARM_LINUX_JB_PC 21
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. */
-
-void
+/* FIXME rearnsha/2002-02-23: This function shouldn't be necessary.
+ The ARM generic one should be able to handle the model used by
+ linux and the low-level formatting of the registers should be
+ hidden behind the regcache abstraction. */
+static void
arm_linux_extract_return_value (struct type *type,
- char regbuf[REGISTER_BYTES],
+ char regbuf[],
char *valbuf)
{
/* ScottB: This needs to be looked at to handle the different
- floating point emulators on ARM Linux. Right now the code
+ floating point emulators on ARM GNU/Linux. Right now the code
assumes that fetch inferior registers does the right thing for
GDB. I suspect this won't handle NWFPE registers correctly, nor
will the default ARM version (arm_extract_return_value()). */
- int regnum = (TYPE_CODE_FLT == TYPE_CODE (type)) ? F0_REGNUM : A1_REGNUM;
- memcpy (valbuf, ®buf[REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
+ int regnum = ((TYPE_CODE_FLT == TYPE_CODE (type))
+ ? ARM_F0_REGNUM : ARM_A1_REGNUM);
+ memcpy (valbuf, ®buf[DEPRECATED_REGISTER_BYTE (regnum)], TYPE_LENGTH (type));
}
-
-/* Note: ScottB
-
- This function does not support passing parameters using the FPA
- variant of the APCS. It passes any floating point arguments in the
- general registers and/or on the stack.
-
- FIXME: This and arm_push_arguments should be merged. However this
- function breaks on a little endian host, big endian target
- using the COFF file format. ELF is ok.
-
- ScottB. */
-
-/* Addresses for calling Thumb functions have the bit 0 set.
- Here are some macros to test, set, or clear bit 0 of addresses. */
-#define IS_THUMB_ADDR(addr) ((addr) & 1)
-#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
-#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
-CORE_ADDR
-arm_linux_push_arguments (int nargs, value_ptr * args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
-{
- char *fp;
- int argnum, argreg, nstack_size;
-
- /* Walk through the list of args and determine how large a temporary
- stack is required. Need to take care here as structs may be
- passed on the stack, and we have to to push them. */
- nstack_size = -4 * REGISTER_SIZE; /* Some arguments go into A1-A4. */
-
- if (struct_return) /* The struct address goes in A1. */
- nstack_size += REGISTER_SIZE;
-
- /* Walk through the arguments and add their size to nstack_size. */
- for (argnum = 0; argnum < nargs; argnum++)
- {
- int len;
- struct type *arg_type;
-
- arg_type = check_typedef (VALUE_TYPE (args[argnum]));
- len = TYPE_LENGTH (arg_type);
-
- /* ANSI C code passes float arguments as integers, K&R code
- passes float arguments as doubles. Correct for this here. */
- if (TYPE_CODE_FLT == TYPE_CODE (arg_type) && REGISTER_SIZE == len)
- nstack_size += FP_REGISTER_VIRTUAL_SIZE;
- else
- nstack_size += len;
- }
-
- /* Allocate room on the stack, and initialize our stack frame
- pointer. */
- fp = NULL;
- if (nstack_size > 0)
- {
- sp -= nstack_size;
- fp = (char *) sp;
- }
-
- /* Initialize the integer argument register pointer. */
- argreg = A1_REGNUM;
-
- /* The struct_return pointer occupies the first parameter passing
- register. */
- if (struct_return)
- write_register (argreg++, struct_addr);
-
- /* Process arguments from left to right. Store as many as allowed
- in the parameter passing registers (A1-A4), and save the rest on
- the temporary stack. */
- for (argnum = 0; argnum < nargs; argnum++)
- {
- int len;
- char *val;
- double dbl_arg;
- CORE_ADDR regval;
- enum type_code typecode;
- struct type *arg_type, *target_type;
-
- arg_type = check_typedef (VALUE_TYPE (args[argnum]));
- target_type = TYPE_TARGET_TYPE (arg_type);
- len = TYPE_LENGTH (arg_type);
- typecode = TYPE_CODE (arg_type);
- val = (char *) VALUE_CONTENTS (args[argnum]);
-
- /* ANSI C code passes float arguments as integers, K&R code
- passes float arguments as doubles. The .stabs record for
- for ANSI prototype floating point arguments records the
- type as FP_INTEGER, while a K&R style (no prototype)
- .stabs records the type as FP_FLOAT. In this latter case
- the compiler converts the float arguments to double before
- calling the function. */
- if (TYPE_CODE_FLT == typecode && REGISTER_SIZE == len)
- {
- /* Float argument in buffer is in host format. Read it and
- convert to DOUBLEST, and store it in target double. */
- DOUBLEST dblval;
-
- len = TARGET_DOUBLE_BIT / TARGET_CHAR_BIT;
- floatformat_to_doublest (HOST_FLOAT_FORMAT, val, &dblval);
- store_floating (&dbl_arg, len, dblval);
- val = (char *) &dbl_arg;
- }
-
- /* If the argument is a pointer to a function, and it is a Thumb
- function, set the low bit of the pointer. */
- if (TYPE_CODE_PTR == typecode
- && NULL != target_type
- && TYPE_CODE_FUNC == TYPE_CODE (target_type))
- {
- CORE_ADDR regval = extract_address (val, len);
- if (arm_pc_is_thumb (regval))
- store_address (val, len, MAKE_THUMB_ADDR (regval));
- }
-
- /* Copy the argument to general registers or the stack in
- register-sized pieces. Large arguments are split between
- registers and stack. */
- while (len > 0)
- {
- int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE;
-
- if (argreg <= ARM_LAST_ARG_REGNUM)
- {
- /* It's an argument being passed in a general register. */
- regval = extract_address (val, partial_len);
- write_register (argreg++, regval);
- }
- else
- {
- /* Push the arguments onto the stack. */
- write_memory ((CORE_ADDR) fp, val, REGISTER_SIZE);
- fp += REGISTER_SIZE;
- }
-
- len -= partial_len;
- val += partial_len;
- }
- }
-
- /* Return adjusted stack pointer. */
- return sp;
-}
-
/*
- Dynamic Linking on ARM Linux
- ----------------------------
+ Dynamic Linking on ARM GNU/Linux
+ --------------------------------
Note: PLT = procedure linkage table
GOT = global offset table
When the executable or library is first loaded, each GOT entry is
initialized to point to the code which implements dynamic name
resolution and code finding. This is normally a function in the
- program interpreter (on ARM Linux this is usually ld-linux.so.2,
- but it does not have to be). On the first invocation, the function
- is located and the GOT entry is replaced with the real function
- address. Subsequent calls go through steps 1, 2 and 3 and end up
- calling the real code.
+ program interpreter (on ARM GNU/Linux this is usually
+ ld-linux.so.2, but it does not have to be). On the first
+ invocation, the function is located and the GOT entry is replaced
+ with the real function address. Subsequent calls go through steps
+ 1, 2 and 3 and end up calling the real code.
1) In the code:
with. Before the fixup/resolver code returns, it actually calls
the requested function and repairs &GOT[n+3]. */
-CORE_ADDR
-arm_skip_solib_resolver (CORE_ADDR pc)
+/* The constants below were determined by examining the following files
+ in the linux kernel sources:
+
+ arch/arm/kernel/signal.c
+ - see SWI_SYS_SIGRETURN and SWI_SYS_RT_SIGRETURN
+ include/asm-arm/unistd.h
+ - see __NR_sigreturn, __NR_rt_sigreturn, and __NR_SYSCALL_BASE */
+
+#define ARM_LINUX_SIGRETURN_INSTR 0xef900077
+#define ARM_LINUX_RT_SIGRETURN_INSTR 0xef9000ad
+
+/* For ARM EABI, recognize the pattern that glibc uses... alternatively,
+ we could arrange to do this by function name, but they are not always
+ exported. */
+#define ARM_SET_R7_SIGRETURN 0xe3a07077
+#define ARM_SET_R7_RT_SIGRETURN 0xe3a070ad
+#define ARM_EABI_SYSCALL 0xef000000
+
+static void
+arm_linux_sigtramp_cache (struct frame_info *next_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func, int regs_offset)
+{
+ CORE_ADDR sp = frame_unwind_register_unsigned (next_frame, ARM_SP_REGNUM);
+ CORE_ADDR base = sp + regs_offset;
+ int i;
+
+ for (i = 0; i < 16; i++)
+ trad_frame_set_reg_addr (this_cache, i, base + i * 4);
+
+ trad_frame_set_reg_addr (this_cache, ARM_PS_REGNUM, base + 16 * 4);
+
+ /* The VFP or iWMMXt registers may be saved on the stack, but there's
+ no reliable way to restore them (yet). */
+
+ /* Save a frame ID. */
+ trad_frame_set_id (this_cache, frame_id_build (sp, func));
+}
+
+static void
+arm_linux_sigreturn_init (const struct tramp_frame *self,
+ struct frame_info *next_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ arm_linux_sigtramp_cache (next_frame, this_cache, func,
+ 0x0c /* Offset to registers. */);
+}
+
+static void
+arm_linux_rt_sigreturn_init (const struct tramp_frame *self,
+ struct frame_info *next_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ arm_linux_sigtramp_cache (next_frame, this_cache, func,
+ 0x88 /* Offset to ucontext_t. */
+ + 0x14 /* Offset to sigcontext. */
+ + 0x0c /* Offset to registers. */);
+}
+
+static struct tramp_frame arm_linux_sigreturn_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { ARM_LINUX_SIGRETURN_INSTR, -1 },
+ { TRAMP_SENTINEL_INSN }
+ },
+ arm_linux_sigreturn_init
+};
+
+static struct tramp_frame arm_linux_rt_sigreturn_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { ARM_LINUX_RT_SIGRETURN_INSTR, -1 },
+ { TRAMP_SENTINEL_INSN }
+ },
+ arm_linux_rt_sigreturn_init
+};
+
+static struct tramp_frame arm_eabi_linux_sigreturn_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { ARM_SET_R7_SIGRETURN, -1 },
+ { ARM_EABI_SYSCALL, -1 },
+ { TRAMP_SENTINEL_INSN }
+ },
+ arm_linux_sigreturn_init
+};
+
+static struct tramp_frame arm_eabi_linux_rt_sigreturn_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { ARM_SET_R7_RT_SIGRETURN, -1 },
+ { ARM_EABI_SYSCALL, -1 },
+ { TRAMP_SENTINEL_INSN }
+ },
+ arm_linux_rt_sigreturn_init
+};
+
+static void
+arm_linux_init_abi (struct gdbarch_info info,
+ struct gdbarch *gdbarch)
{
- /* FIXME */
- return 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ tdep->lowest_pc = 0x8000;
+ if (info.byte_order == BFD_ENDIAN_BIG)
+ {
+ if (tdep->arm_abi == ARM_ABI_AAPCS)
+ tdep->arm_breakpoint = eabi_linux_arm_be_breakpoint;
+ else
+ tdep->arm_breakpoint = arm_linux_arm_be_breakpoint;
+ tdep->thumb_breakpoint = arm_linux_thumb_be_breakpoint;
+ }
+ else
+ {
+ if (tdep->arm_abi == ARM_ABI_AAPCS)
+ tdep->arm_breakpoint = eabi_linux_arm_le_breakpoint;
+ else
+ tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
+ tdep->thumb_breakpoint = arm_linux_thumb_le_breakpoint;
+ }
+ tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint);
+ tdep->thumb_breakpoint_size = sizeof (arm_linux_thumb_le_breakpoint);
+
+ if (tdep->fp_model == ARM_FLOAT_AUTO)
+ tdep->fp_model = ARM_FLOAT_FPA;
+
+ tdep->jb_pc = ARM_LINUX_JB_PC;
+ tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE;
+
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, svr4_ilp32_fetch_link_map_offsets);
+
+ /* The following override shouldn't be needed. */
+ set_gdbarch_deprecated_extract_return_value (gdbarch, arm_linux_extract_return_value);
+
+ /* Shared library handling. */
+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
+ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);
+
+ /* Enable TLS support. */
+ set_gdbarch_fetch_tls_load_module_address (gdbarch,
+ svr4_fetch_objfile_link_map);
+
+ tramp_frame_prepend_unwinder (gdbarch,
+ &arm_linux_sigreturn_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &arm_linux_rt_sigreturn_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &arm_eabi_linux_sigreturn_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &arm_eabi_linux_rt_sigreturn_tramp_frame);
}
void
_initialize_arm_linux_tdep (void)
{
+ gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_LINUX,
+ arm_linux_init_abi);
}