-/* Copyright (C) 1988, 1989 Free Software Foundation, Inc.
+/* Common target dependent code for GDB on ARM systems.
+ Copyright 1988, 1989, 1991, 1992, 1993, 1995, 1996, 1997, 1998, 1999, 2000
+ Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include "param.h"
#include "frame.h"
#include "inferior.h"
-#include "arm-opcode.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "symfile.h"
+#include "gdb_string.h"
+#include "coff/internal.h" /* Internal format of COFF symbols in BFD */
+#include "dis-asm.h" /* For register flavors. */
+#include <ctype.h> /* for isupper () */
-#include <stdio.h>
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <sys/ptrace.h>
-#include <machine/reg.h>
+extern void _initialize_arm_tdep (void);
-#define N_TXTADDR(hdr) 0x8000
-#define N_DATADDR(hdr) (hdr.a_text + 0x8000)
+/* Number of different reg name sets (options). */
+static int num_flavor_options;
-#include "gdbcore.h"
-#include <sys/user.h> /* After a.out.h */
-#include <sys/file.h>
-#include <sys/stat.h>
+/* We have more registers than the disassembler as gdb can print the value
+ of special registers as well.
+ The general register names are overwritten by whatever is being used by
+ the disassembler at the moment. We also adjust the case of cpsr and fps. */
-#include <errno.h>
+/* Initial value: Register names used in ARM's ISA documentation. */
+static char * arm_register_name_strings[] =
+{"r0", "r1", "r2", "r3", /* 0 1 2 3 */
+ "r4", "r5", "r6", "r7", /* 4 5 6 7 */
+ "r8", "r9", "r10", "r11", /* 8 9 10 11 */
+ "r12", "sp", "lr", "pc", /* 12 13 14 15 */
+ "f0", "f1", "f2", "f3", /* 16 17 18 19 */
+ "f4", "f5", "f6", "f7", /* 20 21 22 23 */
+ "fps", "cpsr" }; /* 24 25 */
+char **arm_register_names = arm_register_name_strings;
-\f
-/* Work with core dump and executable files, for GDB.
- This code would be in core.c if it weren't machine-dependent. */
-
-/* Structure to describe the chain of shared libraries used
- by the execfile.
- e.g. prog shares Xt which shares X11 which shares c. */
-
-struct shared_library {
- struct exec_header header;
- char name[SHLIBLEN];
- CORE_ADDR text_start; /* CORE_ADDR of 1st byte of text, this file */
- long data_offset; /* offset of data section in file */
- int chan; /* file descriptor for the file */
- struct shared_library *shares; /* library this one shares */
-};
-static struct shared_library *shlib = 0;
-
-/* Hook for `exec_file_command' command to call. */
-
-extern void (*exec_file_display_hook) ();
-
-static CORE_ADDR unshared_text_start;
+/* Valid register name flavors. */
+static const char **valid_flavors;
-/* extended header from exec file (for shared library info) */
+/* Disassembly flavor to use. Default to "std" register names. */
+static const char *disassembly_flavor;
+static int current_option; /* Index to that option in the opcodes table. */
-static struct exec_header exec_header;
+/* This is used to keep the bfd arch_info in sync with the disassembly
+ flavor. */
+static void set_disassembly_flavor_sfunc(char *, int,
+ struct cmd_list_element *);
+static void set_disassembly_flavor (void);
-void
-exec_file_command (filename, from_tty)
- char *filename;
- int from_tty;
-{
- int val;
-
- /* Eliminate all traces of old exec file.
- Mark text segment as empty. */
-
- if (execfile)
- free (execfile);
- execfile = 0;
- data_start = 0;
- data_end -= exec_data_start;
- text_start = 0;
- unshared_text_start = 0;
- text_end = 0;
- exec_data_start = 0;
- exec_data_end = 0;
- if (execchan >= 0)
- close (execchan);
- execchan = -1;
- if (shlib) {
- close_shared_library(shlib);
- shlib = 0;
- }
-
- /* Now open and digest the file the user requested, if any. */
-
- if (filename)
- {
- filename = tilde_expand (filename);
- make_cleanup (free, filename);
-
- execchan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
- &execfile);
- if (execchan < 0)
- perror_with_name (filename);
-
- {
- struct stat st_exec;
-
-#ifdef HEADER_SEEK_FD
- HEADER_SEEK_FD (execchan);
-#endif
-
- val = myread (execchan, &exec_header, sizeof exec_header);
- exec_aouthdr = exec_header.a_exec;
+static void convert_from_extended (void *ptr, void *dbl);
+
+/* Define other aspects of the stack frame. We keep the offsets of
+ all saved registers, 'cause we need 'em a lot! We also keep the
+ current size of the stack frame, and the offset of the frame
+ pointer from the stack pointer (for frameless functions, and when
+ we're still in the prologue of a function with a frame) */
+
+struct frame_extra_info
+ {
+ struct frame_saved_regs fsr;
+ int framesize;
+ int frameoffset;
+ int framereg;
+ };
+
+/* Addresses for calling Thumb functions have the bit 0 set.
+ Here are some macros to test, set, or clear bit 0 of addresses. */
+#define IS_THUMB_ADDR(addr) ((addr) & 1)
+#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
+#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
+
+#define SWAP_TARGET_AND_HOST(buffer,len) \
+ do \
+ { \
+ if (TARGET_BYTE_ORDER != HOST_BYTE_ORDER) \
+ { \
+ char tmp; \
+ char *p = (char *)(buffer); \
+ char *q = ((char *)(buffer)) + len - 1; \
+ for (; p < q; p++, q--) \
+ { \
+ tmp = *q; \
+ *q = *p; \
+ *p = tmp; \
+ } \
+ } \
+ } \
+ while (0)
+
+/* Will a function return an aggregate type in memory or in a
+ register? Return 0 if an aggregate type can be returned in a
+ register, 1 if it must be returned in memory. */
+
+int
+arm_use_struct_convention (int gcc_p, struct type *type)
+{
+ int nRc;
+ register enum type_code code;
+
+ /* In the ARM ABI, "integer" like aggregate types are returned in
+ registers. For an aggregate type to be integer like, its size
+ must be less than or equal to REGISTER_SIZE and the offset of
+ each addressable subfield must be zero. Note that bit fields are
+ not addressable, and all addressable subfields of unions always
+ start at offset zero.
+
+ This function is based on the behaviour of GCC 2.95.1.
+ See: gcc/arm.c: arm_return_in_memory() for details.
- if (val < 0)
- perror_with_name (filename);
+ Note: All versions of GCC before GCC 2.95.2 do not set up the
+ parameters correctly for a function returning the following
+ structure: struct { float f;}; This should be returned in memory,
+ not a register. Richard Earnshaw sent me a patch, but I do not
+ know of any way to detect if a function like the above has been
+ compiled with the correct calling convention. */
- text_start = 0x8000;
+ /* All aggregate types that won't fit in a register must be returned
+ in memory. */
+ if (TYPE_LENGTH (type) > REGISTER_SIZE)
+ {
+ return 1;
+ }
- /* Look for shared library if needed */
- if (exec_header.a_exec.a_magic & MF_USES_SL)
- shlib = open_shared_library(exec_header.a_shlibname, text_start);
+ /* The only aggregate types that can be returned in a register are
+ structs and unions. Arrays must be returned in memory. */
+ code = TYPE_CODE (type);
+ if ((TYPE_CODE_STRUCT != code) && (TYPE_CODE_UNION != code))
+ {
+ return 1;
+ }
- text_offset = N_TXTOFF (exec_aouthdr);
- exec_data_offset = N_TXTOFF (exec_aouthdr) + exec_aouthdr.a_text;
+ /* Assume all other aggregate types can be returned in a register.
+ Run a check for structures, unions and arrays. */
+ nRc = 0;
- if (shlib) {
- unshared_text_start = shared_text_end(shlib) & ~0x7fff;
- stack_start = shlib->header.a_exec.a_sldatabase;
- stack_end = STACK_END_ADDR;
- } else
- unshared_text_start = 0x8000;
- text_end = unshared_text_start + exec_aouthdr.a_text;
+ if ((TYPE_CODE_STRUCT == code) || (TYPE_CODE_UNION == code))
+ {
+ int i;
+ /* Need to check if this struct/union is "integer" like. For
+ this to be true, its size must be less than or equal to
+ REGISTER_SIZE and the offset of each addressable subfield
+ must be zero. Note that bit fields are not addressable, and
+ unions always start at offset zero. If any of the subfields
+ is a floating point type, the struct/union cannot be an
+ integer type. */
- exec_data_start = unshared_text_start + exec_aouthdr.a_text;
- exec_data_end = exec_data_start + exec_aouthdr.a_data;
+ /* For each field in the object, check:
+ 1) Is it FP? --> yes, nRc = 1;
+ 2) Is it addressable (bitpos != 0) and
+ not packed (bitsize == 0)?
+ --> yes, nRc = 1
+ */
- data_start = exec_data_start;
- data_end += exec_data_start;
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
+ {
+ enum type_code field_type_code;
+ field_type_code = TYPE_CODE (TYPE_FIELD_TYPE (type, i));
- fstat (execchan, &st_exec);
- exec_mtime = st_exec.st_mtime;
- }
+ /* Is it a floating point type field? */
+ if (field_type_code == TYPE_CODE_FLT)
+ {
+ nRc = 1;
+ break;
+ }
- validate_files ();
+ /* If bitpos != 0, then we have to care about it. */
+ if (TYPE_FIELD_BITPOS (type, i) != 0)
+ {
+ /* Bitfields are not addressable. If the field bitsize is
+ zero, then the field is not packed. Hence it cannot be
+ a bitfield or any other packed type. */
+ if (TYPE_FIELD_BITSIZE (type, i) == 0)
+ {
+ nRc = 1;
+ break;
+ }
+ }
+ }
}
- else if (from_tty)
- printf ("No exec file now.\n");
- /* Tell display code (if any) about the changed file name. */
- if (exec_file_display_hook)
- (*exec_file_display_hook) (filename);
+ return nRc;
+}
+
+int
+arm_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe)
+{
+ return (chain != 0 && (FRAME_SAVED_PC (thisframe) >= LOWEST_PC));
}
-/* Read from the program's memory (except for inferior processes).
- This function is misnamed, since it only reads, never writes; and
- since it will use the core file and/or executable file as necessary.
+/* Set to true if the 32-bit mode is in use. */
+
+int arm_apcs_32 = 1;
+
+/* Flag set by arm_fix_call_dummy that tells whether the target
+ function is a Thumb function. This flag is checked by
+ arm_push_arguments. FIXME: Change the PUSH_ARGUMENTS macro (and
+ its use in valops.c) to pass the function address as an additional
+ parameter. */
- It should be extended to write as well as read, FIXME, for patching files.
+static int target_is_thumb;
- Return 0 if address could be read, EIO if addresss out of bounds. */
+/* Flag set by arm_fix_call_dummy that tells whether the calling
+ function is a Thumb function. This flag is checked by
+ arm_pc_is_thumb and arm_call_dummy_breakpoint_offset. */
+
+static int caller_is_thumb;
+
+/* Determine if the program counter specified in MEMADDR is in a Thumb
+ function. */
int
-xfer_core_file (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
+arm_pc_is_thumb (bfd_vma memaddr)
{
- register int i;
- register int val;
- int xferchan;
- char **xferfile;
- int fileptr;
- int returnval = 0;
+ struct minimal_symbol *sym;
- while (len > 0)
+ /* If bit 0 of the address is set, assume this is a Thumb address. */
+ if (IS_THUMB_ADDR (memaddr))
+ return 1;
+
+ /* Thumb functions have a "special" bit set in minimal symbols. */
+ sym = lookup_minimal_symbol_by_pc (memaddr);
+ if (sym)
+ {
+ return (MSYMBOL_IS_SPECIAL (sym));
+ }
+ else
{
- xferfile = 0;
- xferchan = 0;
+ return 0;
+ }
+}
+
+/* Determine if the program counter specified in MEMADDR is in a call
+ dummy being called from a Thumb function. */
+
+int
+arm_pc_is_thumb_dummy (bfd_vma memaddr)
+{
+ CORE_ADDR sp = read_sp ();
+
+ /* FIXME: Until we switch for the new call dummy macros, this heuristic
+ is the best we can do. We are trying to determine if the pc is on
+ the stack, which (hopefully) will only happen in a call dummy.
+ We hope the current stack pointer is not so far alway from the dummy
+ frame location (true if we have not pushed large data structures or
+ gone too many levels deep) and that our 1024 is not enough to consider
+ code regions as part of the stack (true for most practical purposes) */
+ if (PC_IN_CALL_DUMMY (memaddr, sp, sp + 1024))
+ return caller_is_thumb;
+ else
+ return 0;
+}
+
+CORE_ADDR
+arm_addr_bits_remove (CORE_ADDR val)
+{
+ if (arm_pc_is_thumb (val))
+ return (val & (arm_apcs_32 ? 0xfffffffe : 0x03fffffe));
+ else
+ return (val & (arm_apcs_32 ? 0xfffffffc : 0x03fffffc));
+}
+
+CORE_ADDR
+arm_saved_pc_after_call (struct frame_info *frame)
+{
+ return ADDR_BITS_REMOVE (read_register (LR_REGNUM));
+}
+
+int
+arm_frameless_function_invocation (struct frame_info *fi)
+{
+ CORE_ADDR func_start, after_prologue;
+ int frameless;
- /* Determine which file the next bunch of addresses reside in,
- and where in the file. Set the file's read/write pointer
- to point at the proper place for the desired address
- and set xferfile and xferchan for the correct file.
+ func_start = (get_pc_function_start ((fi)->pc) + FUNCTION_START_OFFSET);
+ after_prologue = SKIP_PROLOGUE (func_start);
- If desired address is nonexistent, leave them zero.
+ /* There are some frameless functions whose first two instructions
+ follow the standard APCS form, in which case after_prologue will
+ be func_start + 8. */
- i is set to the number of bytes that can be handled
- along with the next address.
+ frameless = (after_prologue < func_start + 12);
+ return frameless;
+}
+
+/* A typical Thumb prologue looks like this:
+ push {r7, lr}
+ add sp, sp, #-28
+ add r7, sp, #12
+ Sometimes the latter instruction may be replaced by:
+ mov r7, sp
+
+ or like this:
+ push {r7, lr}
+ mov r7, sp
+ sub sp, #12
+
+ or, on tpcs, like this:
+ sub sp,#16
+ push {r7, lr}
+ (many instructions)
+ mov r7, sp
+ sub sp, #12
+
+ There is always one instruction of three classes:
+ 1 - push
+ 2 - setting of r7
+ 3 - adjusting of sp
+
+ When we have found at least one of each class we are done with the prolog.
+ Note that the "sub sp, #NN" before the push does not count.
+ */
+
+static CORE_ADDR
+thumb_skip_prologue (CORE_ADDR pc, CORE_ADDR func_end)
+{
+ CORE_ADDR current_pc;
+ int findmask = 0; /* findmask:
+ bit 0 - push { rlist }
+ bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7)
+ bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp)
+ */
- We put the most likely tests first for efficiency. */
+ for (current_pc = pc; current_pc + 2 < func_end && current_pc < pc + 40; current_pc += 2)
+ {
+ unsigned short insn = read_memory_unsigned_integer (current_pc, 2);
- /* Note that if there is no core file
- data_start and data_end are equal. */
- if (memaddr >= data_start && memaddr < data_end)
+ if ((insn & 0xfe00) == 0xb400) /* push { rlist } */
{
- i = min (len, data_end - memaddr);
- fileptr = memaddr - data_start + data_offset;
- xferfile = &corefile;
- xferchan = corechan;
+ findmask |= 1; /* push found */
}
- /* Note that if there is no core file
- stack_start and stack_end define the shared library data. */
- else if (memaddr >= stack_start && memaddr < stack_end)
+ else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR sub sp, #simm */
{
- if (corechan < 0) {
- struct shared_library *lib;
- for (lib = shlib; lib; lib = lib->shares)
- if (memaddr >= lib->header.a_exec.a_sldatabase &&
- memaddr < lib->header.a_exec.a_sldatabase +
- lib->header.a_exec.a_data)
- break;
- if (lib) {
- i = min (len, lib->header.a_exec.a_sldatabase +
- lib->header.a_exec.a_data - memaddr);
- fileptr = lib->data_offset + memaddr -
- lib->header.a_exec.a_sldatabase;
- xferfile = execfile;
- xferchan = lib->chan;
- }
- } else {
- i = min (len, stack_end - memaddr);
- fileptr = memaddr - stack_start + stack_offset;
- xferfile = &corefile;
- xferchan = corechan;
- }
+ if ((findmask & 1) == 0) /* before push ? */
+ continue;
+ else
+ findmask |= 4; /* add/sub sp found */
}
- else if (corechan < 0
- && memaddr >= exec_data_start && memaddr < exec_data_end)
+ else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */
{
- i = min (len, exec_data_end - memaddr);
- fileptr = memaddr - exec_data_start + exec_data_offset;
- xferfile = &execfile;
- xferchan = execchan;
+ findmask |= 2; /* setting of r7 found */
}
- else if (memaddr >= text_start && memaddr < text_end)
+ else if (insn == 0x466f) /* mov r7, sp */
{
- struct shared_library *lib;
- for (lib = shlib; lib; lib = lib->shares)
- if (memaddr >= lib->text_start &&
- memaddr < lib->text_start + lib->header.a_exec.a_text)
- break;
- if (lib) {
- i = min (len, lib->header.a_exec.a_text +
- lib->text_start - memaddr);
- fileptr = memaddr - lib->text_start + text_offset;
- xferfile = &execfile;
- xferchan = lib->chan;
- } else {
- i = min (len, text_end - memaddr);
- fileptr = memaddr - unshared_text_start + text_offset;
- xferfile = &execfile;
- xferchan = execchan;
- }
+ findmask |= 2; /* setting of r7 found */
}
- else if (memaddr < text_start)
+ else
+ continue; /* something in the prolog that we don't care about or some
+ instruction from outside the prolog scheduled here for optimization */
+ }
+
+ return current_pc;
+}
+
+/* The APCS (ARM Procedure Call Standard) defines the following
+ prologue:
+
+ mov ip, sp
+ [stmfd sp!, {a1,a2,a3,a4}]
+ stmfd sp!, {...,fp,ip,lr,pc}
+ [stfe f7, [sp, #-12]!]
+ [stfe f6, [sp, #-12]!]
+ [stfe f5, [sp, #-12]!]
+ [stfe f4, [sp, #-12]!]
+ sub fp, ip, #nn @@ nn == 20 or 4 depending on second insn */
+
+CORE_ADDR
+arm_skip_prologue (CORE_ADDR pc)
+{
+ unsigned long inst;
+ CORE_ADDR skip_pc;
+ CORE_ADDR func_addr, func_end;
+ struct symtab_and_line sal;
+
+ /* See what the symbol table says. */
+
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ {
+ sal = find_pc_line (func_addr, 0);
+ if ((sal.line != 0) && (sal.end < func_end))
+ return sal.end;
+ }
+
+ /* Check if this is Thumb code. */
+ if (arm_pc_is_thumb (pc))
+ return thumb_skip_prologue (pc, func_end);
+
+ /* Can't find the prologue end in the symbol table, try it the hard way
+ by disassembling the instructions. */
+ skip_pc = pc;
+ inst = read_memory_integer (skip_pc, 4);
+ if (inst != 0xe1a0c00d) /* mov ip, sp */
+ return pc;
+
+ skip_pc += 4;
+ inst = read_memory_integer (skip_pc, 4);
+ if ((inst & 0xfffffff0) == 0xe92d0000) /* stmfd sp!,{a1,a2,a3,a4} */
+ {
+ skip_pc += 4;
+ inst = read_memory_integer (skip_pc, 4);
+ }
+
+ if ((inst & 0xfffff800) != 0xe92dd800) /* stmfd sp!,{...,fp,ip,lr,pc} */
+ return pc;
+
+ skip_pc += 4;
+ inst = read_memory_integer (skip_pc, 4);
+
+ /* Any insns after this point may float into the code, if it makes
+ for better instruction scheduling, so we skip them only if we
+ find them, but still consdier the function to be frame-ful. */
+
+ /* We may have either one sfmfd instruction here, or several stfe
+ insns, depending on the version of floating point code we
+ support. */
+ if ((inst & 0xffbf0fff) == 0xec2d0200) /* sfmfd fn, <cnt>, [sp]! */
+ {
+ skip_pc += 4;
+ inst = read_memory_integer (skip_pc, 4);
+ }
+ else
+ {
+ while ((inst & 0xffff8fff) == 0xed6d0103) /* stfe fn, [sp, #-12]! */
{
- i = min (len, text_start - memaddr);
+ skip_pc += 4;
+ inst = read_memory_integer (skip_pc, 4);
}
- else if (memaddr >= text_end
- && memaddr < (corechan >= 0? data_start : exec_data_start))
+ }
+
+ if ((inst & 0xfffff000) == 0xe24cb000) /* sub fp, ip, #nn */
+ skip_pc += 4;
+
+ return skip_pc;
+}
+/* *INDENT-OFF* */
+/* Function: thumb_scan_prologue (helper function for arm_scan_prologue)
+ This function decodes a Thumb function prologue to determine:
+ 1) the size of the stack frame
+ 2) which registers are saved on it
+ 3) the offsets of saved regs
+ 4) the offset from the stack pointer to the frame pointer
+ This information is stored in the "extra" fields of the frame_info.
+
+ A typical Thumb function prologue would create this stack frame
+ (offsets relative to FP)
+ old SP -> 24 stack parameters
+ 20 LR
+ 16 R7
+ R7 -> 0 local variables (16 bytes)
+ SP -> -12 additional stack space (12 bytes)
+ The frame size would thus be 36 bytes, and the frame offset would be
+ 12 bytes. The frame register is R7.
+
+ The comments for thumb_skip_prolog() describe the algorithm we use to detect
+ the end of the prolog */
+/* *INDENT-ON* */
+
+static void
+thumb_scan_prologue (struct frame_info *fi)
+{
+ CORE_ADDR prologue_start;
+ CORE_ADDR prologue_end;
+ CORE_ADDR current_pc;
+ int saved_reg[16]; /* which register has been copied to register n? */
+ int findmask = 0; /* findmask:
+ bit 0 - push { rlist }
+ bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7)
+ bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp)
+ */
+ int i;
+
+ if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end))
+ {
+ struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+
+ if (sal.line == 0) /* no line info, use current PC */
+ prologue_end = fi->pc;
+ else if (sal.end < prologue_end) /* next line begins after fn end */
+ prologue_end = sal.end; /* (probably means no prologue) */
+ }
+ else
+ prologue_end = prologue_start + 40; /* We're in the boondocks: allow for */
+ /* 16 pushes, an add, and "mv fp,sp" */
+
+ prologue_end = min (prologue_end, fi->pc);
+
+ /* Initialize the saved register map. When register H is copied to
+ register L, we will put H in saved_reg[L]. */
+ for (i = 0; i < 16; i++)
+ saved_reg[i] = i;
+
+ /* Search the prologue looking for instructions that set up the
+ frame pointer, adjust the stack pointer, and save registers.
+ Do this until all basic prolog instructions are found. */
+
+ fi->framesize = 0;
+ for (current_pc = prologue_start;
+ (current_pc < prologue_end) && ((findmask & 7) != 7);
+ current_pc += 2)
+ {
+ unsigned short insn;
+ int regno;
+ int offset;
+
+ insn = read_memory_unsigned_integer (current_pc, 2);
+
+ if ((insn & 0xfe00) == 0xb400) /* push { rlist } */
{
- i = min (len, data_start - memaddr);
+ int mask;
+ findmask |= 1; /* push found */
+ /* Bits 0-7 contain a mask for registers R0-R7. Bit 8 says
+ whether to save LR (R14). */
+ mask = (insn & 0xff) | ((insn & 0x100) << 6);
+
+ /* Calculate offsets of saved R0-R7 and LR. */
+ for (regno = LR_REGNUM; regno >= 0; regno--)
+ if (mask & (1 << regno))
+ {
+ fi->framesize += 4;
+ fi->fsr.regs[saved_reg[regno]] = -(fi->framesize);
+ saved_reg[regno] = regno; /* reset saved register map */
+ }
}
- else if (corechan >= 0
- && memaddr >= data_end && memaddr < stack_start)
+ else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR sub sp, #simm */
{
- i = min (len, stack_start - memaddr);
+ if ((findmask & 1) == 0) /* before push ? */
+ continue;
+ else
+ findmask |= 4; /* add/sub sp found */
+
+ offset = (insn & 0x7f) << 2; /* get scaled offset */
+ if (insn & 0x80) /* is it signed? (==subtracting) */
+ {
+ fi->frameoffset += offset;
+ offset = -offset;
+ }
+ fi->framesize -= offset;
}
- else if (corechan < 0 && memaddr >= exec_data_end)
+ else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */
{
- i = min (len, - memaddr);
+ findmask |= 2; /* setting of r7 found */
+ fi->framereg = THUMB_FP_REGNUM;
+ fi->frameoffset = (insn & 0xff) << 2; /* get scaled offset */
}
- else if (memaddr >= stack_end && stack_end != 0)
+ else if (insn == 0x466f) /* mov r7, sp */
{
- i = min (len, - memaddr);
+ findmask |= 2; /* setting of r7 found */
+ fi->framereg = THUMB_FP_REGNUM;
+ fi->frameoffset = 0;
+ saved_reg[THUMB_FP_REGNUM] = SP_REGNUM;
}
- else
+ else if ((insn & 0xffc0) == 0x4640) /* mov r0-r7, r8-r15 */
{
- /* Address did not classify into one of the known ranges.
- This shouldn't happen; we catch the endpoints. */
- fatal ("Internal: Bad case logic in xfer_core_file.");
+ int lo_reg = insn & 7; /* dest. register (r0-r7) */
+ int hi_reg = ((insn >> 3) & 7) + 8; /* source register (r8-15) */
+ saved_reg[lo_reg] = hi_reg; /* remember hi reg was saved */
}
+ else
+ continue; /* something in the prolog that we don't care about or some
+ instruction from outside the prolog scheduled here for optimization */
+ }
+}
+
+/* Check if prologue for this frame's PC has already been scanned. If
+ it has, copy the relevant information about that prologue and
+ return non-zero. Otherwise do not copy anything and return zero.
+
+ The information saved in the cache includes:
+ * the frame register number;
+ * the size of the stack frame;
+ * the offsets of saved regs (relative to the old SP); and
+ * the offset from the stack pointer to the frame pointer
+
+ The cache contains only one entry, since this is adequate for the
+ typical sequence of prologue scan requests we get. When performing
+ a backtrace, GDB will usually ask to scan the same function twice
+ in a row (once to get the frame chain, and once to fill in the
+ extra frame information). */
+
+static struct frame_info prologue_cache;
+
+static int
+check_prologue_cache (struct frame_info *fi)
+{
+ int i;
+
+ if (fi->pc == prologue_cache.pc)
+ {
+ fi->framereg = prologue_cache.framereg;
+ fi->framesize = prologue_cache.framesize;
+ fi->frameoffset = prologue_cache.frameoffset;
+ for (i = 0; i <= NUM_REGS; i++)
+ fi->fsr.regs[i] = prologue_cache.fsr.regs[i];
+ return 1;
+ }
+ else
+ return 0;
+}
+
+
+/* Copy the prologue information from fi to the prologue cache. */
+
+static void
+save_prologue_cache (struct frame_info *fi)
+{
+ int i;
+
+ prologue_cache.pc = fi->pc;
+ prologue_cache.framereg = fi->framereg;
+ prologue_cache.framesize = fi->framesize;
+ prologue_cache.frameoffset = fi->frameoffset;
+
+ for (i = 0; i <= NUM_REGS; i++)
+ prologue_cache.fsr.regs[i] = fi->fsr.regs[i];
+}
+
+
+/* This function decodes an ARM function prologue to determine:
+ 1) the size of the stack frame
+ 2) which registers are saved on it
+ 3) the offsets of saved regs
+ 4) the offset from the stack pointer to the frame pointer
+ This information is stored in the "extra" fields of the frame_info.
+
+ There are two basic forms for the ARM prologue. The fixed argument
+ function call will look like:
+
+ mov ip, sp
+ stmfd sp!, {fp, ip, lr, pc}
+ sub fp, ip, #4
+ [sub sp, sp, #4]
+
+ Which would create this stack frame (offsets relative to FP):
+ IP -> 4 (caller's stack)
+ FP -> 0 PC (points to address of stmfd instruction + 8 in callee)
+ -4 LR (return address in caller)
+ -8 IP (copy of caller's SP)
+ -12 FP (caller's FP)
+ SP -> -28 Local variables
+
+ The frame size would thus be 32 bytes, and the frame offset would be
+ 28 bytes. The stmfd call can also save any of the vN registers it
+ plans to use, which increases the frame size accordingly.
+
+ Note: The stored PC is 8 off of the STMFD instruction that stored it
+ because the ARM Store instructions always store PC + 8 when you read
+ the PC register.
+
+ A variable argument function call will look like:
+
+ mov ip, sp
+ stmfd sp!, {a1, a2, a3, a4}
+ stmfd sp!, {fp, ip, lr, pc}
+ sub fp, ip, #20
+
+ Which would create this stack frame (offsets relative to FP):
+ IP -> 20 (caller's stack)
+ 16 A4
+ 12 A3
+ 8 A2
+ 4 A1
+ FP -> 0 PC (points to address of stmfd instruction + 8 in callee)
+ -4 LR (return address in caller)
+ -8 IP (copy of caller's SP)
+ -12 FP (caller's FP)
+ SP -> -28 Local variables
+
+ The frame size would thus be 48 bytes, and the frame offset would be
+ 28 bytes.
+
+ There is another potential complication, which is that the optimizer
+ will try to separate the store of fp in the "stmfd" instruction from
+ the "sub fp, ip, #NN" instruction. Almost anything can be there, so
+ we just key on the stmfd, and then scan for the "sub fp, ip, #NN"...
+
+ Also, note, the original version of the ARM toolchain claimed that there
+ should be an
+
+ instruction at the end of the prologue. I have never seen GCC produce
+ this, and the ARM docs don't mention it. We still test for it below in
+ case it happens...
+
+ */
+
+static void
+arm_scan_prologue (struct frame_info *fi)
+{
+ int regno, sp_offset, fp_offset;
+ CORE_ADDR prologue_start, prologue_end, current_pc;
+
+ /* Check if this function is already in the cache of frame information. */
+ if (check_prologue_cache (fi))
+ return;
+
+ /* Assume there is no frame until proven otherwise. */
+ fi->framereg = SP_REGNUM;
+ fi->framesize = 0;
+ fi->frameoffset = 0;
+
+ /* Check for Thumb prologue. */
+ if (arm_pc_is_thumb (fi->pc))
+ {
+ thumb_scan_prologue (fi);
+ save_prologue_cache (fi);
+ return;
+ }
+
+ /* Find the function prologue. If we can't find the function in
+ the symbol table, peek in the stack frame to find the PC. */
+ if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end))
+ {
+ /* Assume the prologue is everything between the first instruction
+ in the function and the first source line. */
+ struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+
+ if (sal.line == 0) /* no line info, use current PC */
+ prologue_end = fi->pc;
+ else if (sal.end < prologue_end) /* next line begins after fn end */
+ prologue_end = sal.end; /* (probably means no prologue) */
+ }
+ else
+ {
+ /* Get address of the stmfd in the prologue of the callee; the saved
+ PC is the address of the stmfd + 8. */
+ prologue_start = ADDR_BITS_REMOVE (read_memory_integer (fi->frame, 4))
+ - 8;
+ prologue_end = prologue_start + 64; /* This is all the insn's
+ that could be in the prologue,
+ plus room for 5 insn's inserted
+ by the scheduler. */
+ }
+
+ /* Now search the prologue looking for instructions that set up the
+ frame pointer, adjust the stack pointer, and save registers.
- /* Now we know which file to use.
- Set up its pointer and transfer the data. */
- if (xferfile)
+ Be careful, however, and if it doesn't look like a prologue,
+ don't try to scan it. If, for instance, a frameless function
+ begins with stmfd sp!, then we will tell ourselves there is
+ a frame, which will confuse stack traceback, as well ad"finish"
+ and other operations that rely on a knowledge of the stack
+ traceback.
+
+ In the APCS, the prologue should start with "mov ip, sp" so
+ if we don't see this as the first insn, we will stop. */
+
+ sp_offset = fp_offset = 0;
+
+ if (read_memory_unsigned_integer (prologue_start, 4)
+ == 0xe1a0c00d) /* mov ip, sp */
+ {
+ for (current_pc = prologue_start + 4; current_pc < prologue_end;
+ current_pc += 4)
{
- if (*xferfile == 0)
- if (xferfile == &execfile)
- error ("No program file to examine.");
- else
- error ("No core dump file or running program to examine.");
- val = lseek (xferchan, fileptr, 0);
- if (val < 0)
- perror_with_name (*xferfile);
- val = myread (xferchan, myaddr, i);
- if (val < 0)
- perror_with_name (*xferfile);
+ unsigned int insn = read_memory_unsigned_integer (current_pc, 4);
+
+ if ((insn & 0xffff0000) == 0xe92d0000)
+ /* stmfd sp!, {..., fp, ip, lr, pc}
+ or
+ stmfd sp!, {a1, a2, a3, a4} */
+ {
+ int mask = insn & 0xffff;
+
+ /* Calculate offsets of saved registers. */
+ for (regno = PC_REGNUM; regno >= 0; regno--)
+ if (mask & (1 << regno))
+ {
+ sp_offset -= 4;
+ fi->fsr.regs[regno] = sp_offset;
+ }
+ }
+ else if ((insn & 0xfffff000) == 0xe24cb000) /* sub fp, ip #n */
+ {
+ unsigned imm = insn & 0xff; /* immediate value */
+ unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
+ imm = (imm >> rot) | (imm << (32 - rot));
+ fp_offset = -imm;
+ fi->framereg = FP_REGNUM;
+ }
+ else if ((insn & 0xfffff000) == 0xe24dd000) /* sub sp, sp #n */
+ {
+ unsigned imm = insn & 0xff; /* immediate value */
+ unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
+ imm = (imm >> rot) | (imm << (32 - rot));
+ sp_offset -= imm;
+ }
+ else if ((insn & 0xffff7fff) == 0xed6d0103) /* stfe f?, [sp, -#c]! */
+ {
+ sp_offset -= 12;
+ regno = F0_REGNUM + ((insn >> 12) & 0x07);
+ fi->fsr.regs[regno] = sp_offset;
+ }
+ else if ((insn & 0xffbf0fff) == 0xec2d0200) /* sfmfd f0, 4, [sp!] */
+ {
+ int n_saved_fp_regs;
+ unsigned int fp_start_reg, fp_bound_reg;
+
+ if ((insn & 0x800) == 0x800) /* N0 is set */
+ {
+ if ((insn & 0x40000) == 0x40000) /* N1 is set */
+ n_saved_fp_regs = 3;
+ else
+ n_saved_fp_regs = 1;
+ }
+ else
+ {
+ if ((insn & 0x40000) == 0x40000) /* N1 is set */
+ n_saved_fp_regs = 2;
+ else
+ n_saved_fp_regs = 4;
+ }
+
+ fp_start_reg = F0_REGNUM + ((insn >> 12) & 0x7);
+ fp_bound_reg = fp_start_reg + n_saved_fp_regs;
+ for (; fp_start_reg < fp_bound_reg; fp_start_reg++)
+ {
+ sp_offset -= 12;
+ fi->fsr.regs[fp_start_reg++] = sp_offset;
+ }
+ }
+ else
+ /* The optimizer might shove anything into the prologue,
+ so we just skip what we don't recognize. */
+ continue;
}
- /* If this address is for nonexistent memory,
- read zeros if reading, or do nothing if writing.
- Actually, we never right. */
- else
+ }
+
+ /* The frame size is just the negative of the offset (from the original SP)
+ of the last thing thing we pushed on the stack. The frame offset is
+ [new FP] - [new SP]. */
+ fi->framesize = -sp_offset;
+ fi->frameoffset = fp_offset - sp_offset;
+
+ save_prologue_cache (fi);
+}
+
+/* Find REGNUM on the stack. Otherwise, it's in an active register.
+ One thing we might want to do here is to check REGNUM against the
+ clobber mask, and somehow flag it as invalid if it isn't saved on
+ the stack somewhere. This would provide a graceful failure mode
+ when trying to get the value of caller-saves registers for an inner
+ frame. */
+
+static CORE_ADDR
+arm_find_callers_reg (struct frame_info *fi, int regnum)
+{
+ for (; fi; fi = fi->next)
+
+#if 0 /* FIXME: enable this code if we convert to new call dummy scheme. */
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ return generic_read_register_dummy (fi->pc, fi->frame, regnum);
+ else
+#endif
+ if (fi->fsr.regs[regnum] != 0)
+ return read_memory_integer (fi->fsr.regs[regnum],
+ REGISTER_RAW_SIZE (regnum));
+ return read_register (regnum);
+}
+/* *INDENT-OFF* */
+/* Function: frame_chain
+ Given a GDB frame, determine the address of the calling function's frame.
+ This will be used to create a new GDB frame struct, and then
+ INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+ For ARM, we save the frame size when we initialize the frame_info.
+
+ The original definition of this function was a macro in tm-arm.h:
+ { In the case of the ARM, the frame's nominal address is the FP value,
+ and 12 bytes before comes the saved previous FP value as a 4-byte word. }
+
+ #define FRAME_CHAIN(thisframe) \
+ ((thisframe)->pc >= LOWEST_PC ? \
+ read_memory_integer ((thisframe)->frame - 12, 4) :\
+ 0)
+*/
+/* *INDENT-ON* */
+
+CORE_ADDR
+arm_frame_chain (struct frame_info *fi)
+{
+#if 0 /* FIXME: enable this code if we convert to new call dummy scheme. */
+ CORE_ADDR fn_start, callers_pc, fp;
+
+ /* is this a dummy frame? */
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ return fi->frame; /* dummy frame same as caller's frame */
+
+ /* is caller-of-this a dummy frame? */
+ callers_pc = FRAME_SAVED_PC (fi); /* find out who called us: */
+ fp = arm_find_callers_reg (fi, FP_REGNUM);
+ if (PC_IN_CALL_DUMMY (callers_pc, fp, fp))
+ return fp; /* dummy frame's frame may bear no relation to ours */
+
+ if (find_pc_partial_function (fi->pc, 0, &fn_start, 0))
+ if (fn_start == entry_point_address ())
+ return 0; /* in _start fn, don't chain further */
+#endif
+ CORE_ADDR caller_pc, fn_start;
+ struct frame_info caller_fi;
+ int framereg = fi->framereg;
+
+ if (fi->pc < LOWEST_PC)
+ return 0;
+
+ /* If the caller is the startup code, we're at the end of the chain. */
+ caller_pc = FRAME_SAVED_PC (fi);
+ if (find_pc_partial_function (caller_pc, 0, &fn_start, 0))
+ if (fn_start == entry_point_address ())
+ return 0;
+
+ /* If the caller is Thumb and the caller is ARM, or vice versa,
+ the frame register of the caller is different from ours.
+ So we must scan the prologue of the caller to determine its
+ frame register number. */
+ if (arm_pc_is_thumb (caller_pc) != arm_pc_is_thumb (fi->pc))
+ {
+ memset (&caller_fi, 0, sizeof (caller_fi));
+ caller_fi.pc = caller_pc;
+ arm_scan_prologue (&caller_fi);
+ framereg = caller_fi.framereg;
+ }
+
+ /* If the caller used a frame register, return its value.
+ Otherwise, return the caller's stack pointer. */
+ if (framereg == FP_REGNUM || framereg == THUMB_FP_REGNUM)
+ return arm_find_callers_reg (fi, framereg);
+ else
+ return fi->frame + fi->framesize;
+}
+
+/* This function actually figures out the frame address for a given pc
+ and sp. This is tricky because we sometimes don't use an explicit
+ frame pointer, and the previous stack pointer isn't necessarily
+ recorded on the stack. The only reliable way to get this info is
+ to examine the prologue. FROMLEAF is a little confusing, it means
+ this is the next frame up the chain AFTER a frameless function. If
+ this is true, then the frame value for this frame is still in the
+ fp register. */
+
+void
+arm_init_extra_frame_info (int fromleaf, struct frame_info *fi)
+{
+ int reg;
+
+ if (fi->next)
+ fi->pc = FRAME_SAVED_PC (fi->next);
+
+ memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+
+#if 0 /* FIXME: enable this code if we convert to new call dummy scheme. */
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ {
+ /* We need to setup fi->frame here because run_stack_dummy gets it wrong
+ by assuming it's always FP. */
+ fi->frame = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM);
+ fi->framesize = 0;
+ fi->frameoffset = 0;
+ return;
+ }
+ else
+#endif
+ {
+ arm_scan_prologue (fi);
+
+ if (!fi->next)
+ /* this is the innermost frame? */
+ fi->frame = read_register (fi->framereg);
+ else if (fi->framereg == FP_REGNUM || fi->framereg == THUMB_FP_REGNUM)
{
- bzero (myaddr, i);
- returnval = EIO;
+ /* not the innermost frame */
+ /* If we have an FP, the callee saved it. */
+ if (fi->next->fsr.regs[fi->framereg] != 0)
+ fi->frame =
+ read_memory_integer (fi->next->fsr.regs[fi->framereg], 4);
+ else if (fromleaf)
+ /* If we were called by a frameless fn. then our frame is
+ still in the frame pointer register on the board... */
+ fi->frame = read_fp ();
}
- memaddr += i;
- myaddr += i;
- len -= i;
+ /* Calculate actual addresses of saved registers using offsets
+ determined by arm_scan_prologue. */
+ for (reg = 0; reg < NUM_REGS; reg++)
+ if (fi->fsr.regs[reg] != 0)
+ fi->fsr.regs[reg] += fi->frame + fi->framesize - fi->frameoffset;
}
- return returnval;
}
-\f
-/* APCS (ARM procedure call standard) defines the following prologue:
-
- mov ip, sp
- [stmfd sp!, {a1,a2,a3,a4}]
- stmfd sp!, {...,fp,ip,lr,pc}
- [stfe f7, [sp, #-12]!]
- [stfe f6, [sp, #-12]!]
- [stfe f5, [sp, #-12]!]
- [stfe f4, [sp, #-12]!]
- sub fp, ip, #nn // nn == 20 or 4 depending on second ins
-*/
+
+
+/* Find the caller of this frame. We do this by seeing if LR_REGNUM
+ is saved in the stack anywhere, otherwise we get it from the
+ registers.
+
+ The old definition of this function was a macro:
+ #define FRAME_SAVED_PC(FRAME) \
+ ADDR_BITS_REMOVE (read_memory_integer ((FRAME)->frame - 4, 4)) */
CORE_ADDR
-skip_prologue(pc)
-CORE_ADDR pc;
-{
- union insn_fmt op;
- CORE_ADDR skip_pc = pc;
-
- op.ins = read_memory_integer(skip_pc, 4);
- /* look for the "mov ip,sp" */
- if (op.generic.type != TYPE_ARITHMETIC ||
- op.arith.opcode != OPCODE_MOV ||
- op.arith.dest != SPTEMP ||
- op.arith.operand2 != SP) return pc;
- skip_pc += 4;
- /* skip the "stmfd sp!,{a1,a2,a3,a4}" if its there */
- op.ins = read_memory_integer(skip_pc, 4);
- if (op.generic.type == TYPE_BLOCK_BRANCH &&
- op.generic.subtype == SUBTYPE_BLOCK &&
- op.block.mask == 0xf &&
- op.block.base == SP &&
- op.block.is_load == 0 &&
- op.block.writeback == 1 &&
- op.block.increment == 0 &&
- op.block.before == 1) skip_pc += 4;
- /* skip the "stmfd sp!,{...,fp,ip,lr,pc} */
- op.ins = read_memory_integer(skip_pc, 4);
- if (op.generic.type != TYPE_BLOCK_BRANCH ||
- op.generic.subtype != SUBTYPE_BLOCK ||
- /* the mask should look like 110110xxxxxx0000 */
- (op.block.mask & 0xd800) != 0xd800 ||
- op.block.base != SP ||
- op.block.is_load != 0 ||
- op.block.writeback != 1 ||
- op.block.increment != 0 ||
- op.block.before != 1) return pc;
- skip_pc += 4;
- /* check for "sub fp,ip,#nn" */
- op.ins = read_memory_integer(skip_pc, 4);
- if (op.generic.type != TYPE_ARITHMETIC ||
- op.arith.opcode != OPCODE_SUB ||
- op.arith.dest != FP ||
- op.arith.operand1 != SPTEMP) return pc;
- return skip_pc + 4;
+arm_frame_saved_pc (struct frame_info *fi)
+{
+#if 0 /* FIXME: enable this code if we convert to new call dummy scheme. */
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
+ else
+#endif
+ {
+ CORE_ADDR pc = arm_find_callers_reg (fi, LR_REGNUM);
+ return IS_THUMB_ADDR (pc) ? UNMAKE_THUMB_ADDR (pc) : pc;
+ }
}
-static void
-print_fpu_flags(flags)
-int flags;
+/* Return the frame address. On ARM, it is R11; on Thumb it is R7.
+ Examine the Program Status Register to decide which state we're in. */
+
+CORE_ADDR
+arm_target_read_fp (void)
+{
+ if (read_register (PS_REGNUM) & 0x20) /* Bit 5 is Thumb state bit */
+ return read_register (THUMB_FP_REGNUM); /* R7 if Thumb */
+ else
+ return read_register (FP_REGNUM); /* R11 if ARM */
+}
+
+/* Calculate the frame offsets of the saved registers (ARM version). */
+
+void
+arm_frame_find_saved_regs (struct frame_info *fi,
+ struct frame_saved_regs *regaddr)
+{
+ memcpy (regaddr, &fi->fsr, sizeof (struct frame_saved_regs));
+}
+
+void
+arm_push_dummy_frame (void)
{
- if (flags & (1 << 0)) fputs("IVO ", stdout);
- if (flags & (1 << 1)) fputs("DVZ ", stdout);
- if (flags & (1 << 2)) fputs("OFL ", stdout);
- if (flags & (1 << 3)) fputs("UFL ", stdout);
- if (flags & (1 << 4)) fputs("INX ", stdout);
- putchar('\n');
+ CORE_ADDR old_sp = read_register (SP_REGNUM);
+ CORE_ADDR sp = old_sp;
+ CORE_ADDR fp, prologue_start;
+ int regnum;
+
+ /* Push the two dummy prologue instructions in reverse order,
+ so that they'll be in the correct low-to-high order in memory. */
+ /* sub fp, ip, #4 */
+ sp = push_word (sp, 0xe24cb004);
+ /* stmdb sp!, {r0-r10, fp, ip, lr, pc} */
+ prologue_start = sp = push_word (sp, 0xe92ddfff);
+
+ /* Push a pointer to the dummy prologue + 12, because when stm
+ instruction stores the PC, it stores the address of the stm
+ instruction itself plus 12. */
+ fp = sp = push_word (sp, prologue_start + 12);
+ sp = push_word (sp, read_register (PC_REGNUM)); /* FIXME: was PS_REGNUM */
+ sp = push_word (sp, old_sp);
+ sp = push_word (sp, read_register (FP_REGNUM));
+
+ for (regnum = 10; regnum >= 0; regnum--)
+ sp = push_word (sp, read_register (regnum));
+
+ write_register (FP_REGNUM, fp);
+ write_register (THUMB_FP_REGNUM, fp);
+ write_register (SP_REGNUM, sp);
}
+/* Fix up the call dummy, based on whether the processor is currently
+ in Thumb or ARM mode, and whether the target function is Thumb or
+ ARM. There are three different situations requiring three
+ different dummies:
+
+ * ARM calling ARM: uses the call dummy in tm-arm.h, which has already
+ been copied into the dummy parameter to this function.
+ * ARM calling Thumb: uses the call dummy in tm-arm.h, but with the
+ "mov pc,r4" instruction patched to be a "bx r4" instead.
+ * Thumb calling anything: uses the Thumb dummy defined below, which
+ works for calling both ARM and Thumb functions.
+
+ All three call dummies expect to receive the target function
+ address in R4, with the low bit set if it's a Thumb function. */
+
void
-arm_float_info()
-{
- register unsigned long status = read_register(FPS_REGNUM);
- int type;
-
- type = (status >> 24) & 127;
- printf("%s FPU type %d\n",
- (status & (1<<31)) ? "Hardware" : "Software",
- type);
- fputs("mask: ", stdout);
- print_fpu_flags(status >> 16);
- fputs("flags: ", stdout);
- print_fpu_flags(status);
+arm_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
+ value_ptr *args, struct type *type, int gcc_p)
+{
+ static short thumb_dummy[4] =
+ {
+ 0xf000, 0xf801, /* bl label */
+ 0xdf18, /* swi 24 */
+ 0x4720, /* label: bx r4 */
+ };
+ static unsigned long arm_bx_r4 = 0xe12fff14; /* bx r4 instruction */
+
+ /* Set flag indicating whether the current PC is in a Thumb function. */
+ caller_is_thumb = arm_pc_is_thumb (read_pc ());
+
+ /* If the target function is Thumb, set the low bit of the function
+ address. And if the CPU is currently in ARM mode, patch the
+ second instruction of call dummy to use a BX instruction to
+ switch to Thumb mode. */
+ target_is_thumb = arm_pc_is_thumb (fun);
+ if (target_is_thumb)
+ {
+ fun |= 1;
+ if (!caller_is_thumb)
+ store_unsigned_integer (dummy + 4, sizeof (arm_bx_r4), arm_bx_r4);
+ }
+
+ /* If the CPU is currently in Thumb mode, use the Thumb call dummy
+ instead of the ARM one that's already been copied. This will
+ work for both Thumb and ARM target functions. */
+ if (caller_is_thumb)
+ {
+ int i;
+ char *p = dummy;
+ int len = sizeof (thumb_dummy) / sizeof (thumb_dummy[0]);
+
+ for (i = 0; i < len; i++)
+ {
+ store_unsigned_integer (p, sizeof (thumb_dummy[0]), thumb_dummy[i]);
+ p += sizeof (thumb_dummy[0]);
+ }
+ }
+
+ /* Put the target address in r4; the call dummy will copy this to
+ the PC. */
+ write_register (4, fun);
+}
+
+/* Return the offset in the call dummy of the instruction that needs
+ to have a breakpoint placed on it. This is the offset of the 'swi
+ 24' instruction, which is no longer actually used, but simply acts
+ as a place-holder now.
+
+ This implements the CALL_DUMMY_BREAK_OFFSET macro. */
+
+int
+arm_call_dummy_breakpoint_offset (void)
+{
+ if (caller_is_thumb)
+ return 4;
+ else
+ return 8;
+}
+
+/* Note: ScottB
+
+ This function does not support passing parameters using the FPA
+ variant of the APCS. It passes any floating point arguments in the
+ general registers and/or on the stack. */
+
+CORE_ADDR
+arm_push_arguments (int nargs, value_ptr * args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ char *fp;
+ int argnum, argreg, nstack_size;
+
+ /* Walk through the list of args and determine how large a temporary
+ stack is required. Need to take care here as structs may be
+ passed on the stack, and we have to to push them. */
+ nstack_size = -4 * REGISTER_SIZE; /* Some arguments go into A1-A4. */
+ if (struct_return) /* The struct address goes in A1. */
+ nstack_size += REGISTER_SIZE;
+
+ /* Walk through the arguments and add their size to nstack_size. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ int len;
+ struct type *arg_type;
+
+ arg_type = check_typedef (VALUE_TYPE (args[argnum]));
+ len = TYPE_LENGTH (arg_type);
+
+ /* ANSI C code passes float arguments as integers, K&R code
+ passes float arguments as doubles. Correct for this here. */
+ if (TYPE_CODE_FLT == TYPE_CODE (arg_type) && REGISTER_SIZE == len)
+ nstack_size += FP_REGISTER_VIRTUAL_SIZE;
+ else
+ nstack_size += len;
+ }
+
+ /* Allocate room on the stack, and initialize our stack frame
+ pointer. */
+ fp = NULL;
+ if (nstack_size > 0)
+ {
+ sp -= nstack_size;
+ fp = (char *) sp;
+ }
+
+ /* Initialize the integer argument register pointer. */
+ argreg = A1_REGNUM;
+
+ /* The struct_return pointer occupies the first parameter passing
+ register. */
+ if (struct_return)
+ write_register (argreg++, struct_addr);
+
+ /* Process arguments from left to right. Store as many as allowed
+ in the parameter passing registers (A1-A4), and save the rest on
+ the temporary stack. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ int len;
+ char *val;
+ double dbl_arg;
+ CORE_ADDR regval;
+ enum type_code typecode;
+ struct type *arg_type, *target_type;
+
+ arg_type = check_typedef (VALUE_TYPE (args[argnum]));
+ target_type = TYPE_TARGET_TYPE (arg_type);
+ len = TYPE_LENGTH (arg_type);
+ typecode = TYPE_CODE (arg_type);
+ val = (char *) VALUE_CONTENTS (args[argnum]);
+
+ /* ANSI C code passes float arguments as integers, K&R code
+ passes float arguments as doubles. The .stabs record for
+ for ANSI prototype floating point arguments records the
+ type as FP_INTEGER, while a K&R style (no prototype)
+ .stabs records the type as FP_FLOAT. In this latter case
+ the compiler converts the float arguments to double before
+ calling the function. */
+ if (TYPE_CODE_FLT == typecode && REGISTER_SIZE == len)
+ {
+ float f;
+ double d;
+ char * bufo = (char *) &d;
+ char * bufd = (char *) &dbl_arg;
+
+ len = sizeof (double);
+ f = *(float *) val;
+ SWAP_TARGET_AND_HOST (&f, sizeof (float)); /* adjust endianess */
+ d = f;
+ /* We must revert the longwords so they get loaded into the
+ the right registers. */
+ memcpy (bufd, bufo + len / 2, len / 2);
+ SWAP_TARGET_AND_HOST (bufd, len / 2); /* adjust endianess */
+ memcpy (bufd + len / 2, bufo, len / 2);
+ SWAP_TARGET_AND_HOST (bufd + len / 2, len / 2); /* adjust endianess */
+ val = (char *) &dbl_arg;
+ }
+#if 1
+ /* I don't know why this code was disable. The only logical use
+ for a function pointer is to call that function, so setting
+ the mode bit is perfectly fine. FN */
+ /* If the argument is a pointer to a function, and it is a Thumb
+ function, set the low bit of the pointer. */
+ if (TYPE_CODE_PTR == typecode
+ && NULL != target_type
+ && TYPE_CODE_FUNC == TYPE_CODE (target_type))
+ {
+ CORE_ADDR regval = extract_address (val, len);
+ if (arm_pc_is_thumb (regval))
+ store_address (val, len, MAKE_THUMB_ADDR (regval));
+ }
+#endif
+ /* Copy the argument to general registers or the stack in
+ register-sized pieces. Large arguments are split between
+ registers and stack. */
+ while (len > 0)
+ {
+ int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE;
+
+ if (argreg <= ARM_LAST_ARG_REGNUM)
+ {
+ /* It's an argument being passed in a general register. */
+ regval = extract_address (val, partial_len);
+ write_register (argreg++, regval);
+ }
+ else
+ {
+ /* Push the arguments onto the stack. */
+ write_memory ((CORE_ADDR) fp, val, REGISTER_SIZE);
+ fp += REGISTER_SIZE;
+ }
+
+ len -= partial_len;
+ val += partial_len;
+ }
+ }
+
+ /* Return adjusted stack pointer. */
+ return sp;
+}
+
+void
+arm_pop_frame (void)
+{
+ int regnum;
+ struct frame_info *frame = get_current_frame ();
+
+ if (!PC_IN_CALL_DUMMY(frame->pc, frame->frame, read_fp()))
+ {
+ CORE_ADDR old_SP;
+
+ old_SP = read_register (frame->framereg);
+ for (regnum = 0; regnum < NUM_REGS; regnum++)
+ if (frame->fsr.regs[regnum] != 0)
+ write_register (regnum,
+ read_memory_integer (frame->fsr.regs[regnum], 4));
+
+ write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+ write_register (SP_REGNUM, old_SP);
+ }
+ else
+ {
+ CORE_ADDR sp;
+
+ sp = read_register (FP_REGNUM);
+ sp -= sizeof(CORE_ADDR); /* we don't care about this first word */
+
+ write_register (PC_REGNUM, read_memory_integer (sp, 4));
+ sp -= sizeof(CORE_ADDR);
+ write_register (SP_REGNUM, read_memory_integer (sp, 4));
+ sp -= sizeof(CORE_ADDR);
+ write_register (FP_REGNUM, read_memory_integer (sp, 4));
+ sp -= sizeof(CORE_ADDR);
+
+ for (regnum = 10; regnum >= 0; regnum--)
+ {
+ write_register (regnum, read_memory_integer (sp, 4));
+ sp -= sizeof(CORE_ADDR);
+ }
+ }
+
+ flush_cached_frames ();
+}
+
+static void
+print_fpu_flags (int flags)
+{
+ if (flags & (1 << 0))
+ fputs ("IVO ", stdout);
+ if (flags & (1 << 1))
+ fputs ("DVZ ", stdout);
+ if (flags & (1 << 2))
+ fputs ("OFL ", stdout);
+ if (flags & (1 << 3))
+ fputs ("UFL ", stdout);
+ if (flags & (1 << 4))
+ fputs ("INX ", stdout);
+ putchar ('\n');
+}
+
+void
+arm_float_info (void)
+{
+ register unsigned long status = read_register (FPS_REGNUM);
+ int type;
+
+ type = (status >> 24) & 127;
+ printf ("%s FPU type %d\n",
+ (status & (1 << 31)) ? "Hardware" : "Software",
+ type);
+ fputs ("mask: ", stdout);
+ print_fpu_flags (status >> 16);
+ fputs ("flags: ", stdout);
+ print_fpu_flags (status);
+}
+
+#if 0
+/* FIXME: The generated assembler works but sucks. Instead of using
+ r0, r1 it pushes them on the stack, then loads them into r3, r4 and
+ uses those registers. I must be missing something. ScottB */
+
+void
+convert_from_extended (void *ptr, void *dbl)
+{
+ __asm__ ("
+ ldfe f0,[%0]
+ stfd f0,[%1] "
+: /* no output */
+: "r" (ptr), "r" (dbl));
+}
+
+void
+convert_to_extended (void *dbl, void *ptr)
+{
+ __asm__ ("
+ ldfd f0,[%0]
+ stfe f0,[%1] "
+: /* no output */
+: "r" (dbl), "r" (ptr));
+}
+#else
+static void
+convert_from_extended (void *ptr, void *dbl)
+{
+ *(double *) dbl = *(double *) ptr;
+}
+
+void
+convert_to_extended (void *dbl, void *ptr)
+{
+ *(double *) ptr = *(double *) dbl;
+}
+#endif
+
+/* Nonzero if register N requires conversion from raw format to
+ virtual format. */
+
+int
+arm_register_convertible (unsigned int regnum)
+{
+ return ((regnum - F0_REGNUM) < 8);
+}
+
+/* Convert data from raw format for register REGNUM in buffer FROM to
+ virtual format with type TYPE in buffer TO. */
+
+void
+arm_register_convert_to_virtual (unsigned int regnum, struct type *type,
+ void *from, void *to)
+{
+ double val;
+
+ convert_from_extended (from, &val);
+ store_floating (to, TYPE_LENGTH (type), val);
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM to
+ raw format for register REGNUM in buffer TO. */
+
+void
+arm_register_convert_to_raw (unsigned int regnum, struct type *type,
+ void *from, void *to)
+{
+ double val = extract_floating (from, TYPE_LENGTH (type));
+
+ convert_to_extended (&val, to);
+}
+
+static int
+condition_true (unsigned long cond, unsigned long status_reg)
+{
+ if (cond == INST_AL || cond == INST_NV)
+ return 1;
+
+ switch (cond)
+ {
+ case INST_EQ:
+ return ((status_reg & FLAG_Z) != 0);
+ case INST_NE:
+ return ((status_reg & FLAG_Z) == 0);
+ case INST_CS:
+ return ((status_reg & FLAG_C) != 0);
+ case INST_CC:
+ return ((status_reg & FLAG_C) == 0);
+ case INST_MI:
+ return ((status_reg & FLAG_N) != 0);
+ case INST_PL:
+ return ((status_reg & FLAG_N) == 0);
+ case INST_VS:
+ return ((status_reg & FLAG_V) != 0);
+ case INST_VC:
+ return ((status_reg & FLAG_V) == 0);
+ case INST_HI:
+ return ((status_reg & (FLAG_C | FLAG_Z)) == FLAG_C);
+ case INST_LS:
+ return ((status_reg & (FLAG_C | FLAG_Z)) != FLAG_C);
+ case INST_GE:
+ return (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0));
+ case INST_LT:
+ return (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0));
+ case INST_GT:
+ return (((status_reg & FLAG_Z) == 0) &&
+ (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0)));
+ case INST_LE:
+ return (((status_reg & FLAG_Z) != 0) ||
+ (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0)));
+ }
+ return 1;
+}
+
+#define submask(x) ((1L << ((x) + 1)) - 1)
+#define bit(obj,st) (((obj) >> (st)) & 1)
+#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
+#define sbits(obj,st,fn) \
+ ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
+#define BranchDest(addr,instr) \
+ ((CORE_ADDR) (((long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
+#define ARM_PC_32 1
+
+static unsigned long
+shifted_reg_val (unsigned long inst, int carry, unsigned long pc_val,
+ unsigned long status_reg)
+{
+ unsigned long res, shift;
+ int rm = bits (inst, 0, 3);
+ unsigned long shifttype = bits (inst, 5, 6);
+
+ if (bit (inst, 4))
+ {
+ int rs = bits (inst, 8, 11);
+ shift = (rs == 15 ? pc_val + 8 : read_register (rs)) & 0xFF;
+ }
+ else
+ shift = bits (inst, 7, 11);
+
+ res = (rm == 15
+ ? ((pc_val | (ARM_PC_32 ? 0 : status_reg))
+ + (bit (inst, 4) ? 12 : 8))
+ : read_register (rm));
+
+ switch (shifttype)
+ {
+ case 0: /* LSL */
+ res = shift >= 32 ? 0 : res << shift;
+ break;
+
+ case 1: /* LSR */
+ res = shift >= 32 ? 0 : res >> shift;
+ break;
+
+ case 2: /* ASR */
+ if (shift >= 32)
+ shift = 31;
+ res = ((res & 0x80000000L)
+ ? ~((~res) >> shift) : res >> shift);
+ break;
+
+ case 3: /* ROR/RRX */
+ shift &= 31;
+ if (shift == 0)
+ res = (res >> 1) | (carry ? 0x80000000L : 0);
+ else
+ res = (res >> shift) | (res << (32 - shift));
+ break;
+ }
+
+ return res & 0xffffffff;
+}
+
+/* Return number of 1-bits in VAL. */
+
+static int
+bitcount (unsigned long val)
+{
+ int nbits;
+ for (nbits = 0; val != 0; nbits++)
+ val &= val - 1; /* delete rightmost 1-bit in val */
+ return nbits;
+}
+
+static CORE_ADDR
+thumb_get_next_pc (CORE_ADDR pc)
+{
+ unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
+ unsigned short inst1 = read_memory_integer (pc, 2);
+ CORE_ADDR nextpc = pc + 2; /* default is next instruction */
+ unsigned long offset;
+
+ if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
+ {
+ CORE_ADDR sp;
+
+ /* Fetch the saved PC from the stack. It's stored above
+ all of the other registers. */
+ offset = bitcount (bits (inst1, 0, 7)) * REGISTER_SIZE;
+ sp = read_register (SP_REGNUM);
+ nextpc = (CORE_ADDR) read_memory_integer (sp + offset, 4);
+ nextpc = ADDR_BITS_REMOVE (nextpc);
+ if (nextpc == pc)
+ error ("Infinite loop detected");
+ }
+ else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
+ {
+ unsigned long status = read_register (PS_REGNUM);
+ unsigned long cond = bits (inst1, 8, 11);
+ if (cond != 0x0f && condition_true (cond, status)) /* 0x0f = SWI */
+ nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
+ }
+ else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
+ {
+ nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
+ }
+ else if ((inst1 & 0xf800) == 0xf000) /* long branch with link */
+ {
+ unsigned short inst2 = read_memory_integer (pc + 2, 2);
+ offset = (sbits (inst1, 0, 10) << 12) + (bits (inst2, 0, 10) << 1);
+ nextpc = pc_val + offset;
+ }
+
+ return nextpc;
+}
+
+CORE_ADDR
+arm_get_next_pc (CORE_ADDR pc)
+{
+ unsigned long pc_val;
+ unsigned long this_instr;
+ unsigned long status;
+ CORE_ADDR nextpc;
+
+ if (arm_pc_is_thumb (pc))
+ return thumb_get_next_pc (pc);
+
+ pc_val = (unsigned long) pc;
+ this_instr = read_memory_integer (pc, 4);
+ status = read_register (PS_REGNUM);
+ nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
+
+ if (condition_true (bits (this_instr, 28, 31), status))
+ {
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0x0:
+ case 0x1: /* data processing */
+ case 0x2:
+ case 0x3:
+ {
+ unsigned long operand1, operand2, result = 0;
+ unsigned long rn;
+ int c;
+
+ if (bits (this_instr, 12, 15) != 15)
+ break;
+
+ if (bits (this_instr, 22, 25) == 0
+ && bits (this_instr, 4, 7) == 9) /* multiply */
+ error ("Illegal update to pc in instruction");
+
+ /* Multiply into PC */
+ c = (status & FLAG_C) ? 1 : 0;
+ rn = bits (this_instr, 16, 19);
+ operand1 = (rn == 15) ? pc_val + 8 : read_register (rn);
+
+ if (bit (this_instr, 25))
+ {
+ unsigned long immval = bits (this_instr, 0, 7);
+ unsigned long rotate = 2 * bits (this_instr, 8, 11);
+ operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
+ & 0xffffffff;
+ }
+ else /* operand 2 is a shifted register */
+ operand2 = shifted_reg_val (this_instr, c, pc_val, status);
+
+ switch (bits (this_instr, 21, 24))
+ {
+ case 0x0: /*and */
+ result = operand1 & operand2;
+ break;
+
+ case 0x1: /*eor */
+ result = operand1 ^ operand2;
+ break;
+
+ case 0x2: /*sub */
+ result = operand1 - operand2;
+ break;
+
+ case 0x3: /*rsb */
+ result = operand2 - operand1;
+ break;
+
+ case 0x4: /*add */
+ result = operand1 + operand2;
+ break;
+
+ case 0x5: /*adc */
+ result = operand1 + operand2 + c;
+ break;
+
+ case 0x6: /*sbc */
+ result = operand1 - operand2 + c;
+ break;
+
+ case 0x7: /*rsc */
+ result = operand2 - operand1 + c;
+ break;
+
+ case 0x8:
+ case 0x9:
+ case 0xa:
+ case 0xb: /* tst, teq, cmp, cmn */
+ result = (unsigned long) nextpc;
+ break;
+
+ case 0xc: /*orr */
+ result = operand1 | operand2;
+ break;
+
+ case 0xd: /*mov */
+ /* Always step into a function. */
+ result = operand2;
+ break;
+
+ case 0xe: /*bic */
+ result = operand1 & ~operand2;
+ break;
+
+ case 0xf: /*mvn */
+ result = ~operand2;
+ break;
+ }
+ nextpc = (CORE_ADDR) ADDR_BITS_REMOVE (result);
+
+ if (nextpc == pc)
+ error ("Infinite loop detected");
+ break;
+ }
+
+ case 0x4:
+ case 0x5: /* data transfer */
+ case 0x6:
+ case 0x7:
+ if (bit (this_instr, 20))
+ {
+ /* load */
+ if (bits (this_instr, 12, 15) == 15)
+ {
+ /* rd == pc */
+ unsigned long rn;
+ unsigned long base;
+
+ if (bit (this_instr, 22))
+ error ("Illegal update to pc in instruction");
+
+ /* byte write to PC */
+ rn = bits (this_instr, 16, 19);
+ base = (rn == 15) ? pc_val + 8 : read_register (rn);
+ if (bit (this_instr, 24))
+ {
+ /* pre-indexed */
+ int c = (status & FLAG_C) ? 1 : 0;
+ unsigned long offset =
+ (bit (this_instr, 25)
+ ? shifted_reg_val (this_instr, c, pc_val, status)
+ : bits (this_instr, 0, 11));
+
+ if (bit (this_instr, 23))
+ base += offset;
+ else
+ base -= offset;
+ }
+ nextpc = (CORE_ADDR) read_memory_integer ((CORE_ADDR) base,
+ 4);
+
+ nextpc = ADDR_BITS_REMOVE (nextpc);
+
+ if (nextpc == pc)
+ error ("Infinite loop detected");
+ }
+ }
+ break;
+
+ case 0x8:
+ case 0x9: /* block transfer */
+ if (bit (this_instr, 20))
+ {
+ /* LDM */
+ if (bit (this_instr, 15))
+ {
+ /* loading pc */
+ int offset = 0;
+
+ if (bit (this_instr, 23))
+ {
+ /* up */
+ unsigned long reglist = bits (this_instr, 0, 14);
+ offset = bitcount (reglist) * 4;
+ if (bit (this_instr, 24)) /* pre */
+ offset += 4;
+ }
+ else if (bit (this_instr, 24))
+ offset = -4;
+
+ {
+ unsigned long rn_val =
+ read_register (bits (this_instr, 16, 19));
+ nextpc =
+ (CORE_ADDR) read_memory_integer ((CORE_ADDR) (rn_val
+ + offset),
+ 4);
+ }
+ nextpc = ADDR_BITS_REMOVE (nextpc);
+ if (nextpc == pc)
+ error ("Infinite loop detected");
+ }
+ }
+ break;
+
+ case 0xb: /* branch & link */
+ case 0xa: /* branch */
+ {
+ nextpc = BranchDest (pc, this_instr);
+
+ nextpc = ADDR_BITS_REMOVE (nextpc);
+ if (nextpc == pc)
+ error ("Infinite loop detected");
+ break;
+ }
+
+ case 0xc:
+ case 0xd:
+ case 0xe: /* coproc ops */
+ case 0xf: /* SWI */
+ break;
+
+ default:
+ fprintf (stderr, "Bad bit-field extraction\n");
+ return (pc);
+ }
+ }
+
+ return nextpc;
+}
+
+#include "bfd-in2.h"
+#include "libcoff.h"
+
+static int
+gdb_print_insn_arm (bfd_vma memaddr, disassemble_info *info)
+{
+ if (arm_pc_is_thumb (memaddr))
+ {
+ static asymbol *asym;
+ static combined_entry_type ce;
+ static struct coff_symbol_struct csym;
+ static struct _bfd fake_bfd;
+ static bfd_target fake_target;
+
+ if (csym.native == NULL)
+ {
+ /* Create a fake symbol vector containing a Thumb symbol. This is
+ solely so that the code in print_insn_little_arm() and
+ print_insn_big_arm() in opcodes/arm-dis.c will detect the presence
+ of a Thumb symbol and switch to decoding Thumb instructions. */
+
+ fake_target.flavour = bfd_target_coff_flavour;
+ fake_bfd.xvec = &fake_target;
+ ce.u.syment.n_sclass = C_THUMBEXTFUNC;
+ csym.native = &ce;
+ csym.symbol.the_bfd = &fake_bfd;
+ csym.symbol.name = "fake";
+ asym = (asymbol *) & csym;
+ }
+
+ memaddr = UNMAKE_THUMB_ADDR (memaddr);
+ info->symbols = &asym;
+ }
+ else
+ info->symbols = NULL;
+
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ return print_insn_big_arm (memaddr, info);
+ else
+ return print_insn_little_arm (memaddr, info);
+}
+
+/* This function implements the BREAKPOINT_FROM_PC macro. It uses the
+ program counter value to determine whether a 16-bit or 32-bit
+ breakpoint should be used. It returns a pointer to a string of
+ bytes that encode a breakpoint instruction, stores the length of
+ the string to *lenptr, and adjusts the program counter (if
+ necessary) to point to the actual memory location where the
+ breakpoint should be inserted. */
+
+unsigned char *
+arm_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+{
+ if (arm_pc_is_thumb (*pcptr) || arm_pc_is_thumb_dummy (*pcptr))
+ {
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ static char thumb_breakpoint[] = THUMB_BE_BREAKPOINT;
+ *pcptr = UNMAKE_THUMB_ADDR (*pcptr);
+ *lenptr = sizeof (thumb_breakpoint);
+ return thumb_breakpoint;
+ }
+ else
+ {
+ static char thumb_breakpoint[] = THUMB_LE_BREAKPOINT;
+ *pcptr = UNMAKE_THUMB_ADDR (*pcptr);
+ *lenptr = sizeof (thumb_breakpoint);
+ return thumb_breakpoint;
+ }
+ }
+ else
+ {
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ static char arm_breakpoint[] = ARM_BE_BREAKPOINT;
+ *lenptr = sizeof (arm_breakpoint);
+ return arm_breakpoint;
+ }
+ else
+ {
+ static char arm_breakpoint[] = ARM_LE_BREAKPOINT;
+ *lenptr = sizeof (arm_breakpoint);
+ return arm_breakpoint;
+ }
+ }
+}
+
+/* Extract from an array REGBUF containing the (raw) register state a
+ function return value of type TYPE, and copy that, in virtual
+ format, into VALBUF. */
+
+void
+arm_extract_return_value (struct type *type,
+ char regbuf[REGISTER_BYTES],
+ char *valbuf)
+{
+ if (TYPE_CODE_FLT == TYPE_CODE (type))
+ convert_from_extended (®buf[REGISTER_BYTE (F0_REGNUM)], valbuf);
+ else
+ memcpy (valbuf, ®buf[REGISTER_BYTE (A1_REGNUM)], TYPE_LENGTH (type));
+}
+
+/* Return non-zero if the PC is inside a thumb call thunk. */
+
+int
+arm_in_call_stub (CORE_ADDR pc, char *name)
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. If
+ the caller didn't give us a name, look it up at the same time. */
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ return 0;
+
+ return strncmp (name, "_call_via_r", 11) == 0;
+}
+
+/* If PC is in a Thumb call or return stub, return the address of the
+ target PC, which is in a register. The thunk functions are called
+ _called_via_xx, where x is the register name. The possible names
+ are r0-r9, sl, fp, ip, sp, and lr. */
+
+CORE_ADDR
+arm_skip_stub (CORE_ADDR pc)
+{
+ char *name;
+ CORE_ADDR start_addr;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+ return 0;
+
+ /* Call thunks always start with "_call_via_". */
+ if (strncmp (name, "_call_via_", 10) == 0)
+ {
+ /* Use the name suffix to determine which register contains the
+ target PC. */
+ static char *table[15] =
+ {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "sl", "fp", "ip", "sp", "lr"
+ };
+ int regno;
+
+ for (regno = 0; regno <= 14; regno++)
+ if (strcmp (&name[10], table[regno]) == 0)
+ return read_register (regno);
+ }
+
+ return 0; /* not a stub */
+}
+
+/* If the user changes the register disassembly flavor used for info register
+ and other commands, we have to also switch the flavor used in opcodes
+ for disassembly output.
+ This function is run in the set disassembly_flavor command, and does that. */
+
+static void
+set_disassembly_flavor_sfunc (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ set_disassembly_flavor ();
+}
+\f
+static void
+set_disassembly_flavor (void)
+{
+ const char *setname, *setdesc, **regnames;
+ int numregs, j;
+
+ /* Find the flavor that the user wants in the opcodes table. */
+ int current = 0;
+ numregs = get_arm_regnames (current, &setname, &setdesc, ®names);
+ while ((disassembly_flavor != setname)
+ && (current < num_flavor_options))
+ get_arm_regnames (++current, &setname, &setdesc, ®names);
+ current_option = current;
+
+ /* Fill our copy. */
+ for (j = 0; j < numregs; j++)
+ arm_register_names[j] = (char *) regnames[j];
+
+ /* Adjust case. */
+ if (isupper (*regnames[PC_REGNUM]))
+ {
+ arm_register_names[FPS_REGNUM] = "FPS";
+ arm_register_names[PS_REGNUM] = "CPSR";
+ }
+ else
+ {
+ arm_register_names[FPS_REGNUM] = "fps";
+ arm_register_names[PS_REGNUM] = "cpsr";
+ }
+
+ /* Synchronize the disassembler. */
+ set_arm_regname_option (current);
+}
+
+/* arm_othernames implements the "othernames" command. This is kind
+ of hacky, and I prefer the set-show disassembly-flavor which is
+ also used for the x86 gdb. I will keep this around, however, in
+ case anyone is actually using it. */
+
+static void
+arm_othernames (char *names, int n)
+{
+ /* Circle through the various flavors. */
+ current_option = (current_option + 1) % num_flavor_options;
+
+ disassembly_flavor = valid_flavors[current_option];
+ set_disassembly_flavor ();
+}
+
+void
+_initialize_arm_tdep (void)
+{
+ struct ui_file *stb;
+ long length;
+ struct cmd_list_element *new_cmd;
+ const char *setname;
+ const char *setdesc;
+ const char **regnames;
+ int numregs, i, j;
+ static char *helptext;
+
+ tm_print_insn = gdb_print_insn_arm;
+
+ /* Get the number of possible sets of register names defined in opcodes. */
+ num_flavor_options = get_arm_regname_num_options ();
+
+ /* Sync the opcode insn printer with our register viewer: */
+ parse_arm_disassembler_option ("reg-names-std");
+
+ /* Begin creating the help text. */
+ stb = mem_fileopen ();
+ fprintf_unfiltered (stb, "Set the disassembly flavor.\n\
+The valid values are:\n");
+
+ /* Initialize the array that will be passed to add_set_enum_cmd(). */
+ valid_flavors = xmalloc ((num_flavor_options + 1) * sizeof (char *));
+ for (i = 0; i < num_flavor_options; i++)
+ {
+ numregs = get_arm_regnames (i, &setname, &setdesc, ®names);
+ valid_flavors[i] = setname;
+ fprintf_unfiltered (stb, "%s - %s\n", setname,
+ setdesc);
+ /* Copy the default names (if found) and synchronize disassembler. */
+ if (!strcmp (setname, "std"))
+ {
+ disassembly_flavor = setname;
+ current_option = i;
+ for (j = 0; j < numregs; j++)
+ arm_register_names[j] = (char *) regnames[j];
+ set_arm_regname_option (i);
+ }
+ }
+ /* Mark the end of valid options. */
+ valid_flavors[num_flavor_options] = NULL;
+
+ /* Finish the creation of the help text. */
+ fprintf_unfiltered (stb, "The default is \"std\".");
+ helptext = ui_file_xstrdup (stb, &length);
+ ui_file_delete (stb);
+
+ /* Add the disassembly-flavor command */
+ new_cmd = add_set_enum_cmd ("disassembly-flavor", no_class,
+ valid_flavors,
+ &disassembly_flavor,
+ helptext,
+ &setlist);
+ new_cmd->function.sfunc = set_disassembly_flavor_sfunc;
+ add_show_from_set (new_cmd, &showlist);
+
+ /* ??? Maybe this should be a boolean. */
+ add_show_from_set (add_set_cmd ("apcs32", no_class,
+ var_zinteger, (char *) &arm_apcs_32,
+ "Set usage of ARM 32-bit mode.\n", &setlist),
+ &showlist);
+
+ /* Add the deprecated "othernames" command */
+
+ add_com ("othernames", class_obscure, arm_othernames,
+ "Switch to the next set of register names.");
+}
+
+/* Test whether the coff symbol specific value corresponds to a Thumb
+ function. */
+
+int
+coff_sym_is_thumb (int val)
+{
+ return (val == C_THUMBEXT ||
+ val == C_THUMBSTAT ||
+ val == C_THUMBEXTFUNC ||
+ val == C_THUMBSTATFUNC ||
+ val == C_THUMBLABEL);
}