/* Common target dependent code for GDB on ARM systems.
- Copyright (C) 1988, 1989, 1991, 1992, 1993, 1995, 1996, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Copyright (C) 1988, 1989, 1991, 1992, 1993, 1995, 1996, 1998, 1999, 2000,
+ 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include <ctype.h> /* XXX for isupper () */
#include "trad-frame.h"
#include "objfiles.h"
#include "dwarf2-frame.h"
+#include "gdbtypes.h"
+#include "prologue-value.h"
+#include "target-descriptions.h"
+#include "user-regs.h"
#include "arm-tdep.h"
#include "gdb/sim-arm.h"
#include "elf/arm.h"
#include "gdb_assert.h"
+#include "vec.h"
static int arm_debug;
MSYMBOL_IS_SPECIAL Tests the "special" bit in a minimal symbol. */
#define MSYMBOL_SET_SPECIAL(msym) \
- MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) \
- | 0x80000000)
+ MSYMBOL_TARGET_FLAG_1 (msym) = 1
#define MSYMBOL_IS_SPECIAL(msym) \
- (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0)
+ MSYMBOL_TARGET_FLAG_1 (msym)
+
+/* Macros for swapping shorts and ints. In the unlikely case that anybody else needs these,
+ move to a general header. (A better solution might be to define memory read routines that
+ know whether they are reading code or data.) */
+
+#define SWAP_SHORT(x) \
+ ((((x) & 0xff00) >> 8) | (((x) & 0x00ff) << 8));
+
+#define SWAP_INT(x) \
+ ( ((x & 0xff000000) >> 24) \
+ | ((x & 0x00ff0000) >> 8) \
+ | ((x & 0x0000ff00) << 8) \
+ | ((x & 0x000000ff) << 24))
+
+/* Per-objfile data used for mapping symbols. */
+static const struct objfile_data *arm_objfile_data_key;
+
+struct arm_mapping_symbol
+{
+ bfd_vma value;
+ char type;
+};
+typedef struct arm_mapping_symbol arm_mapping_symbol_s;
+DEF_VEC_O(arm_mapping_symbol_s);
+
+struct arm_per_objfile
+{
+ VEC(arm_mapping_symbol_s) **section_maps;
+};
/* The list of available "set arm ..." and "show arm ..." commands. */
static struct cmd_list_element *setarmcmdlist = NULL;
static enum arm_abi_kind arm_abi_global = ARM_ABI_AUTO;
static const char *arm_abi_string = "auto";
+/* The execution mode to assume. */
+static const char *arm_mode_strings[] =
+ {
+ "auto",
+ "arm",
+ "thumb"
+ };
+
+static const char *arm_fallback_mode_string = "auto";
+static const char *arm_force_mode_string = "auto";
+
/* Number of different reg name sets (options). */
static int num_disassembly_options;
-/* We have more registers than the disassembler as gdb can print the value
- of special registers as well.
- The general register names are overwritten by whatever is being used by
- the disassembler at the moment. We also adjust the case of cpsr and fps. */
+/* The standard register names, and all the valid aliases for them. */
+static const struct
+{
+ const char *name;
+ int regnum;
+} arm_register_aliases[] = {
+ /* Basic register numbers. */
+ { "r0", 0 },
+ { "r1", 1 },
+ { "r2", 2 },
+ { "r3", 3 },
+ { "r4", 4 },
+ { "r5", 5 },
+ { "r6", 6 },
+ { "r7", 7 },
+ { "r8", 8 },
+ { "r9", 9 },
+ { "r10", 10 },
+ { "r11", 11 },
+ { "r12", 12 },
+ { "r13", 13 },
+ { "r14", 14 },
+ { "r15", 15 },
+ /* Synonyms (argument and variable registers). */
+ { "a1", 0 },
+ { "a2", 1 },
+ { "a3", 2 },
+ { "a4", 3 },
+ { "v1", 4 },
+ { "v2", 5 },
+ { "v3", 6 },
+ { "v4", 7 },
+ { "v5", 8 },
+ { "v6", 9 },
+ { "v7", 10 },
+ { "v8", 11 },
+ /* Other platform-specific names for r9. */
+ { "sb", 9 },
+ { "tr", 9 },
+ /* Special names. */
+ { "ip", 12 },
+ { "sp", 13 },
+ { "lr", 14 },
+ { "pc", 15 },
+ /* Names used by GCC (not listed in the ARM EABI). */
+ { "sl", 10 },
+ { "fp", 11 },
+ /* A special name from the older ATPCS. */
+ { "wr", 7 },
+};
-/* Initial value: Register names used in ARM's ISA documentation. */
-static char * arm_register_name_strings[] =
+static const char *const arm_register_names[] =
{"r0", "r1", "r2", "r3", /* 0 1 2 3 */
"r4", "r5", "r6", "r7", /* 4 5 6 7 */
"r8", "r9", "r10", "r11", /* 8 9 10 11 */
"f0", "f1", "f2", "f3", /* 16 17 18 19 */
"f4", "f5", "f6", "f7", /* 20 21 22 23 */
"fps", "cpsr" }; /* 24 25 */
-static char **arm_register_names = arm_register_name_strings;
/* Valid register name styles. */
static const char **valid_disassembly_styles;
/* Disassembly style to use. Default to "std" register names. */
static const char *disassembly_style;
-/* Index to that option in the opcodes table. */
-static int current_option;
/* This is used to keep the bfd arch_info in sync with the disassembly
style. */
static void set_disassembly_style (void);
static void convert_from_extended (const struct floatformat *, const void *,
- void *);
+ void *, int);
static void convert_to_extended (const struct floatformat *, void *,
- const void *);
+ const void *, int);
struct arm_prologue_cache
{
to identify this frame. */
CORE_ADDR prev_sp;
- /* The frame base for this frame is just prev_sp + frame offset -
- frame size. FRAMESIZE is the size of this stack frame, and
- FRAMEOFFSET if the initial offset from the stack pointer (this
- frame's stack pointer, not PREV_SP) to the frame base. */
+ /* The frame base for this frame is just prev_sp - frame size.
+ FRAMESIZE is the distance from the frame pointer to the
+ initial stack pointer. */
int framesize;
- int frameoffset;
/* The register used to hold the frame pointer for this frame. */
int framereg;
int arm_apcs_32 = 1;
+/* Determine if FRAME is executing in Thumb mode. */
+
+static int
+arm_frame_is_thumb (struct frame_info *frame)
+{
+ CORE_ADDR cpsr;
+
+ /* Every ARM frame unwinder can unwind the T bit of the CPSR, either
+ directly (from a signal frame or dummy frame) or by interpreting
+ the saved LR (from a prologue or DWARF frame). So consult it and
+ trust the unwinders. */
+ cpsr = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
+
+ return (cpsr & CPSR_T) != 0;
+}
+
+/* Callback for VEC_lower_bound. */
+
+static inline int
+arm_compare_mapping_symbols (const struct arm_mapping_symbol *lhs,
+ const struct arm_mapping_symbol *rhs)
+{
+ return lhs->value < rhs->value;
+}
+
/* Determine if the program counter specified in MEMADDR is in a Thumb
- function. */
+ function. This function should be called for addresses unrelated to
+ any executing frame; otherwise, prefer arm_frame_is_thumb. */
-int
+static int
arm_pc_is_thumb (CORE_ADDR memaddr)
{
+ struct obj_section *sec;
struct minimal_symbol *sym;
/* If bit 0 of the address is set, assume this is a Thumb address. */
if (IS_THUMB_ADDR (memaddr))
return 1;
+ /* If the user wants to override the symbol table, let him. */
+ if (strcmp (arm_force_mode_string, "arm") == 0)
+ return 0;
+ if (strcmp (arm_force_mode_string, "thumb") == 0)
+ return 1;
+
+ /* If there are mapping symbols, consult them. */
+ sec = find_pc_section (memaddr);
+ if (sec != NULL)
+ {
+ struct arm_per_objfile *data;
+ VEC(arm_mapping_symbol_s) *map;
+ struct arm_mapping_symbol map_key = { memaddr - obj_section_addr (sec),
+ 0 };
+ unsigned int idx;
+
+ data = objfile_data (sec->objfile, arm_objfile_data_key);
+ if (data != NULL)
+ {
+ map = data->section_maps[sec->the_bfd_section->index];
+ if (!VEC_empty (arm_mapping_symbol_s, map))
+ {
+ struct arm_mapping_symbol *map_sym;
+
+ idx = VEC_lower_bound (arm_mapping_symbol_s, map, &map_key,
+ arm_compare_mapping_symbols);
+
+ /* VEC_lower_bound finds the earliest ordered insertion
+ point. If the following symbol starts at this exact
+ address, we use that; otherwise, the preceding
+ mapping symbol covers this address. */
+ if (idx < VEC_length (arm_mapping_symbol_s, map))
+ {
+ map_sym = VEC_index (arm_mapping_symbol_s, map, idx);
+ if (map_sym->value == map_key.value)
+ return map_sym->type == 't';
+ }
+
+ if (idx > 0)
+ {
+ map_sym = VEC_index (arm_mapping_symbol_s, map, idx - 1);
+ return map_sym->type == 't';
+ }
+ }
+ }
+ }
+
/* Thumb functions have a "special" bit set in minimal symbols. */
sym = lookup_minimal_symbol_by_pc (memaddr);
if (sym)
- {
- return (MSYMBOL_IS_SPECIAL (sym));
- }
- else
- {
- return 0;
- }
+ return (MSYMBOL_IS_SPECIAL (sym));
+
+ /* If the user wants to override the fallback mode, let them. */
+ if (strcmp (arm_fallback_mode_string, "arm") == 0)
+ return 0;
+ if (strcmp (arm_fallback_mode_string, "thumb") == 0)
+ return 1;
+
+ /* If we couldn't find any symbol, but we're talking to a running
+ target, then trust the current value of $cpsr. This lets
+ "display/i $pc" always show the correct mode (though if there is
+ a symbol table we will not reach here, so it still may not be
+ displayed in the mode it will be executed). */
+ if (target_has_registers)
+ return arm_frame_is_thumb (get_current_frame ());
+
+ /* Otherwise we're out of luck; we assume ARM. */
+ return 0;
}
/* Remove useless bits from addresses in a running program. */
static CORE_ADDR
-arm_addr_bits_remove (CORE_ADDR val)
+arm_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR val)
{
if (arm_apcs_32)
- return (val & (arm_pc_is_thumb (val) ? 0xfffffffe : 0xfffffffc));
+ return UNMAKE_THUMB_ADDR (val);
else
return (val & 0x03fffffc);
}
/* When reading symbols, we need to zap the low bit of the address,
which may be set to 1 for Thumb functions. */
static CORE_ADDR
-arm_smash_text_address (CORE_ADDR val)
+arm_smash_text_address (struct gdbarch *gdbarch, CORE_ADDR val)
{
return val & ~1;
}
-/* Immediately after a function call, return the saved pc. Can't
- always go through the frames for this because on some machines the
- new frame is not set up until the new function executes some
- instructions. */
+/* Analyze a Thumb prologue, looking for a recognizable stack frame
+ and frame pointer. Scan until we encounter a store that could
+ clobber the stack frame unexpectedly, or an unknown instruction. */
static CORE_ADDR
-arm_saved_pc_after_call (struct frame_info *frame)
+thumb_analyze_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR start, CORE_ADDR limit,
+ struct arm_prologue_cache *cache)
{
- return ADDR_BITS_REMOVE (read_register (ARM_LR_REGNUM));
-}
+ int i;
+ pv_t regs[16];
+ struct pv_area *stack;
+ struct cleanup *back_to;
+ CORE_ADDR offset;
-/* A typical Thumb prologue looks like this:
- push {r7, lr}
- add sp, sp, #-28
- add r7, sp, #12
- Sometimes the latter instruction may be replaced by:
- mov r7, sp
-
- or like this:
- push {r7, lr}
- mov r7, sp
- sub sp, #12
-
- or, on tpcs, like this:
- sub sp,#16
- push {r7, lr}
- (many instructions)
- mov r7, sp
- sub sp, #12
-
- There is always one instruction of three classes:
- 1 - push
- 2 - setting of r7
- 3 - adjusting of sp
-
- When we have found at least one of each class we are done with the prolog.
- Note that the "sub sp, #NN" before the push does not count.
- */
+ for (i = 0; i < 16; i++)
+ regs[i] = pv_register (i, 0);
+ stack = make_pv_area (ARM_SP_REGNUM);
+ back_to = make_cleanup_free_pv_area (stack);
-static CORE_ADDR
-thumb_skip_prologue (CORE_ADDR pc, CORE_ADDR func_end)
-{
- CORE_ADDR current_pc;
- /* findmask:
- bit 0 - push { rlist }
- bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7)
- bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp)
- */
- int findmask = 0;
-
- for (current_pc = pc;
- current_pc + 2 < func_end && current_pc < pc + 40;
- current_pc += 2)
+ while (start < limit)
{
- unsigned short insn = read_memory_unsigned_integer (current_pc, 2);
+ unsigned short insn;
+
+ insn = read_memory_unsigned_integer (start, 2);
+
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ insn = SWAP_SHORT (insn);
if ((insn & 0xfe00) == 0xb400) /* push { rlist } */
{
- findmask |= 1; /* push found */
+ int regno;
+ int mask;
+
+ if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
+ break;
+
+ /* Bits 0-7 contain a mask for registers R0-R7. Bit 8 says
+ whether to save LR (R14). */
+ mask = (insn & 0xff) | ((insn & 0x100) << 6);
+
+ /* Calculate offsets of saved R0-R7 and LR. */
+ for (regno = ARM_LR_REGNUM; regno >= 0; regno--)
+ if (mask & (1 << regno))
+ {
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM],
+ -4);
+ pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[regno]);
+ }
}
else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR
sub sp, #simm */
{
- if ((findmask & 1) == 0) /* before push ? */
- continue;
+ offset = (insn & 0x7f) << 2; /* get scaled offset */
+ if (insn & 0x80) /* Check for SUB. */
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM],
+ -offset);
else
- findmask |= 4; /* add/sub sp found */
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM],
+ offset);
}
else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */
+ regs[THUMB_FP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM],
+ (insn & 0xff) << 2);
+ else if ((insn & 0xff00) == 0x4600) /* mov hi, lo or mov lo, hi */
{
- findmask |= 2; /* setting of r7 found */
+ int dst_reg = (insn & 0x7) + ((insn & 0x80) >> 4);
+ int src_reg = (insn & 0x78) >> 3;
+ regs[dst_reg] = regs[src_reg];
}
- else if (insn == 0x466f) /* mov r7, sp */
+ else if ((insn & 0xf800) == 0x9000) /* str rd, [sp, #off] */
{
- findmask |= 2; /* setting of r7 found */
+ /* Handle stores to the stack. Normally pushes are used,
+ but with GCC -mtpcs-frame, there may be other stores
+ in the prologue to create the frame. */
+ int regno = (insn >> 8) & 0x7;
+ pv_t addr;
+
+ offset = (insn & 0xff) << 2;
+ addr = pv_add_constant (regs[ARM_SP_REGNUM], offset);
+
+ if (pv_area_store_would_trash (stack, addr))
+ break;
+
+ pv_area_store (stack, addr, 4, regs[regno]);
}
- else if (findmask == (4+2+1))
+ else
{
- /* We have found one of each type of prologue instruction */
+ /* We don't know what this instruction is. We're finished
+ scanning. NOTE: Recognizing more safe-to-ignore
+ instructions here will improve support for optimized
+ code. */
break;
}
- else
- /* Something in the prolog that we don't care about or some
- instruction from outside the prolog scheduled here for
- optimization. */
- continue;
+
+ start += 2;
+ }
+
+ if (cache == NULL)
+ {
+ do_cleanups (back_to);
+ return start;
+ }
+
+ if (pv_is_register (regs[ARM_FP_REGNUM], ARM_SP_REGNUM))
+ {
+ /* Frame pointer is fp. Frame size is constant. */
+ cache->framereg = ARM_FP_REGNUM;
+ cache->framesize = -regs[ARM_FP_REGNUM].k;
+ }
+ else if (pv_is_register (regs[THUMB_FP_REGNUM], ARM_SP_REGNUM))
+ {
+ /* Frame pointer is r7. Frame size is constant. */
+ cache->framereg = THUMB_FP_REGNUM;
+ cache->framesize = -regs[THUMB_FP_REGNUM].k;
+ }
+ else if (pv_is_register (regs[ARM_SP_REGNUM], ARM_SP_REGNUM))
+ {
+ /* Try the stack pointer... this is a bit desperate. */
+ cache->framereg = ARM_SP_REGNUM;
+ cache->framesize = -regs[ARM_SP_REGNUM].k;
+ }
+ else
+ {
+ /* We're just out of luck. We don't know where the frame is. */
+ cache->framereg = -1;
+ cache->framesize = 0;
}
- return current_pc;
+ for (i = 0; i < 16; i++)
+ if (pv_area_find_reg (stack, gdbarch, i, &offset))
+ cache->saved_regs[i].addr = offset;
+
+ do_cleanups (back_to);
+ return start;
}
/* Advance the PC across any function entry prologue instructions to
sub fp, ip, #nn @@ nn == 20 or 4 depending on second insn */
static CORE_ADDR
-arm_skip_prologue (CORE_ADDR pc)
+arm_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
unsigned long inst;
CORE_ADDR skip_pc;
- CORE_ADDR func_addr, func_end = 0;
- char *func_name;
+ CORE_ADDR func_addr, limit_pc;
struct symtab_and_line sal;
/* If we're in a dummy frame, don't even try to skip the prologue. */
if (deprecated_pc_in_call_dummy (pc))
return pc;
- /* See what the symbol table says. */
-
- if (find_pc_partial_function (pc, &func_name, &func_addr, &func_end))
+ /* See if we can determine the end of the prologue via the symbol table.
+ If so, then return either PC, or the PC after the prologue, whichever
+ is greater. */
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
{
- struct symbol *sym;
-
- /* Found a function. */
- sym = lookup_symbol (func_name, NULL, VAR_DOMAIN, NULL, NULL);
- if (sym && SYMBOL_LANGUAGE (sym) != language_asm)
- {
- /* Don't use this trick for assembly source files. */
- sal = find_pc_line (func_addr, 0);
- if ((sal.line != 0) && (sal.end < func_end))
- return sal.end;
- }
+ CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
}
- /* Check if this is Thumb code. */
- if (arm_pc_is_thumb (pc))
- return thumb_skip_prologue (pc, func_end);
-
- /* Can't find the prologue end in the symbol table, try it the hard way
- by disassembling the instructions. */
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+ /* Find an upper limit on the function prologue using the debug
+ information. If the debug information could not be used to provide
+ that bound, then use an arbitrary large number as the upper bound. */
/* Like arm_scan_prologue, stop no later than pc + 64. */
- if (func_end == 0 || func_end > pc + 64)
- func_end = pc + 64;
+ limit_pc = skip_prologue_using_sal (pc);
+ if (limit_pc == 0)
+ limit_pc = pc + 64; /* Magic. */
+
- for (skip_pc = pc; skip_pc < func_end; skip_pc += 4)
+ /* Check if this is Thumb code. */
+ if (arm_pc_is_thumb (pc))
+ return thumb_analyze_prologue (gdbarch, pc, limit_pc, NULL);
+
+ for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
{
inst = read_memory_unsigned_integer (skip_pc, 4);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ inst = SWAP_INT (inst);
+
/* "mov ip, sp" is no longer a required part of the prologue. */
if (inst == 0xe1a0c00d) /* mov ip, sp */
continue;
/* *INDENT-ON* */
static void
-thumb_scan_prologue (CORE_ADDR prev_pc, struct arm_prologue_cache *cache)
+thumb_scan_prologue (struct gdbarch *gdbarch, CORE_ADDR prev_pc,
+ CORE_ADDR block_addr, struct arm_prologue_cache *cache)
{
CORE_ADDR prologue_start;
CORE_ADDR prologue_end;
CORE_ADDR current_pc;
- /* Which register has been copied to register n? */
- int saved_reg[16];
- /* findmask:
- bit 0 - push { rlist }
- bit 1 - mov r7, sp OR add r7, sp, #imm (setting of r7)
- bit 2 - sub sp, #simm OR add sp, #simm (adjusting of sp)
- */
- int findmask = 0;
- int i;
- if (find_pc_partial_function (prev_pc, NULL, &prologue_start, &prologue_end))
+ if (find_pc_partial_function (block_addr, NULL, &prologue_start,
+ &prologue_end))
{
struct symtab_and_line sal = find_pc_line (prologue_start, 0);
prologue_end = sal.end; /* (probably means no prologue) */
}
else
- /* We're in the boondocks: allow for
- 16 pushes, an add, and "mv fp,sp". */
- prologue_end = prologue_start + 40;
+ /* We're in the boondocks: we have no idea where the start of the
+ function is. */
+ return;
prologue_end = min (prologue_end, prev_pc);
- /* Initialize the saved register map. When register H is copied to
- register L, we will put H in saved_reg[L]. */
- for (i = 0; i < 16; i++)
- saved_reg[i] = i;
-
- /* Search the prologue looking for instructions that set up the
- frame pointer, adjust the stack pointer, and save registers.
- Do this until all basic prolog instructions are found. */
-
- cache->framesize = 0;
- for (current_pc = prologue_start;
- (current_pc < prologue_end) && ((findmask & 7) != 7);
- current_pc += 2)
- {
- unsigned short insn;
- int regno;
- int offset;
-
- insn = read_memory_unsigned_integer (current_pc, 2);
-
- if ((insn & 0xfe00) == 0xb400) /* push { rlist } */
- {
- int mask;
- findmask |= 1; /* push found */
- /* Bits 0-7 contain a mask for registers R0-R7. Bit 8 says
- whether to save LR (R14). */
- mask = (insn & 0xff) | ((insn & 0x100) << 6);
-
- /* Calculate offsets of saved R0-R7 and LR. */
- for (regno = ARM_LR_REGNUM; regno >= 0; regno--)
- if (mask & (1 << regno))
- {
- cache->framesize += 4;
- cache->saved_regs[saved_reg[regno]].addr = -cache->framesize;
- /* Reset saved register map. */
- saved_reg[regno] = regno;
- }
- }
- else if ((insn & 0xff00) == 0xb000) /* add sp, #simm OR
- sub sp, #simm */
- {
- if ((findmask & 1) == 0) /* before push? */
- continue;
- else
- findmask |= 4; /* add/sub sp found */
-
- offset = (insn & 0x7f) << 2; /* get scaled offset */
- if (insn & 0x80) /* is it signed? (==subtracting) */
- {
- cache->frameoffset += offset;
- offset = -offset;
- }
- cache->framesize -= offset;
- }
- else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */
- {
- findmask |= 2; /* setting of r7 found */
- cache->framereg = THUMB_FP_REGNUM;
- /* get scaled offset */
- cache->frameoffset = (insn & 0xff) << 2;
- }
- else if (insn == 0x466f) /* mov r7, sp */
- {
- findmask |= 2; /* setting of r7 found */
- cache->framereg = THUMB_FP_REGNUM;
- cache->frameoffset = 0;
- saved_reg[THUMB_FP_REGNUM] = ARM_SP_REGNUM;
- }
- else if ((insn & 0xffc0) == 0x4640) /* mov r0-r7, r8-r15 */
- {
- int lo_reg = insn & 7; /* dest. register (r0-r7) */
- int hi_reg = ((insn >> 3) & 7) + 8; /* source register (r8-15) */
- saved_reg[lo_reg] = hi_reg; /* remember hi reg was saved */
- }
- else
- /* Something in the prolog that we don't care about or some
- instruction from outside the prolog scheduled here for
- optimization. */
- continue;
- }
+ thumb_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
}
/* This function decodes an ARM function prologue to determine:
*/
static void
-arm_scan_prologue (struct frame_info *next_frame, struct arm_prologue_cache *cache)
+arm_scan_prologue (struct frame_info *this_frame,
+ struct arm_prologue_cache *cache)
{
- int regno, sp_offset, fp_offset, ip_offset;
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ int regno;
CORE_ADDR prologue_start, prologue_end, current_pc;
- CORE_ADDR prev_pc = frame_pc_unwind (next_frame);
+ CORE_ADDR prev_pc = get_frame_pc (this_frame);
+ CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
+ pv_t regs[ARM_FPS_REGNUM];
+ struct pv_area *stack;
+ struct cleanup *back_to;
+ CORE_ADDR offset;
/* Assume there is no frame until proven otherwise. */
cache->framereg = ARM_SP_REGNUM;
cache->framesize = 0;
- cache->frameoffset = 0;
/* Check for Thumb prologue. */
- if (arm_pc_is_thumb (prev_pc))
+ if (arm_frame_is_thumb (this_frame))
{
- thumb_scan_prologue (prev_pc, cache);
+ thumb_scan_prologue (gdbarch, prev_pc, block_addr, cache);
return;
}
/* Find the function prologue. If we can't find the function in
the symbol table, peek in the stack frame to find the PC. */
- if (find_pc_partial_function (prev_pc, NULL, &prologue_start, &prologue_end))
+ if (find_pc_partial_function (block_addr, NULL, &prologue_start,
+ &prologue_end))
{
/* One way to find the end of the prologue (which works well
for unoptimized code) is to do the following:
CORE_ADDR frame_loc;
LONGEST return_value;
- frame_loc = frame_unwind_register_unsigned (next_frame, ARM_FP_REGNUM);
+ frame_loc = get_frame_register_unsigned (this_frame, ARM_FP_REGNUM);
if (!safe_read_memory_integer (frame_loc, 4, &return_value))
return;
else
{
- prologue_start = ADDR_BITS_REMOVE (return_value) - 8;
+ prologue_start = gdbarch_addr_bits_remove
+ (gdbarch, return_value) - 8;
prologue_end = prologue_start + 64; /* See above. */
}
}
in which case it is often (but not always) replaced by
"str lr, [sp, #-4]!". - Michael Snyder, 2002-04-23] */
- sp_offset = fp_offset = ip_offset = 0;
+ for (regno = 0; regno < ARM_FPS_REGNUM; regno++)
+ regs[regno] = pv_register (regno, 0);
+ stack = make_pv_area (ARM_SP_REGNUM);
+ back_to = make_cleanup_free_pv_area (stack);
for (current_pc = prologue_start;
current_pc < prologue_end;
{
unsigned int insn = read_memory_unsigned_integer (current_pc, 4);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ insn = SWAP_INT (insn);
+
if (insn == 0xe1a0c00d) /* mov ip, sp */
{
- ip_offset = 0;
+ regs[ARM_IP_REGNUM] = regs[ARM_SP_REGNUM];
continue;
}
else if ((insn & 0xfffff000) == 0xe28dc000) /* add ip, sp #n */
unsigned imm = insn & 0xff; /* immediate value */
unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
imm = (imm >> rot) | (imm << (32 - rot));
- ip_offset = imm;
+ regs[ARM_IP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], imm);
continue;
}
else if ((insn & 0xfffff000) == 0xe24dc000) /* sub ip, sp #n */
unsigned imm = insn & 0xff; /* immediate value */
unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
imm = (imm >> rot) | (imm << (32 - rot));
- ip_offset = -imm;
+ regs[ARM_IP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -imm);
continue;
}
else if (insn == 0xe52de004) /* str lr, [sp, #-4]! */
{
- sp_offset -= 4;
- cache->saved_regs[ARM_LR_REGNUM].addr = sp_offset;
+ if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
+ break;
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -4);
+ pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[ARM_LR_REGNUM]);
continue;
}
else if ((insn & 0xffff0000) == 0xe92d0000)
{
int mask = insn & 0xffff;
+ if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
+ break;
+
/* Calculate offsets of saved registers. */
for (regno = ARM_PC_REGNUM; regno >= 0; regno--)
if (mask & (1 << regno))
{
- sp_offset -= 4;
- cache->saved_regs[regno].addr = sp_offset;
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -4);
+ pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[regno]);
}
}
else if ((insn & 0xffffc000) == 0xe54b0000 || /* strb rx,[r11,#-n] */
unsigned imm = insn & 0xff; /* immediate value */
unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
imm = (imm >> rot) | (imm << (32 - rot));
- fp_offset = -imm + ip_offset;
- cache->framereg = ARM_FP_REGNUM;
+ regs[ARM_FP_REGNUM] = pv_add_constant (regs[ARM_IP_REGNUM], -imm);
}
else if ((insn & 0xfffff000) == 0xe24dd000) /* sub sp, sp #n */
{
unsigned imm = insn & 0xff; /* immediate value */
unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
imm = (imm >> rot) | (imm << (32 - rot));
- sp_offset -= imm;
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -imm);
}
- else if ((insn & 0xffff7fff) == 0xed6d0103) /* stfe f?, [sp, -#c]! */
+ else if ((insn & 0xffff7fff) == 0xed6d0103 /* stfe f?, [sp, -#c]! */
+ && gdbarch_tdep (gdbarch)->have_fpa_registers)
{
- sp_offset -= 12;
+ if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
+ break;
+
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -12);
regno = ARM_F0_REGNUM + ((insn >> 12) & 0x07);
- cache->saved_regs[regno].addr = sp_offset;
+ pv_area_store (stack, regs[ARM_SP_REGNUM], 12, regs[regno]);
}
- else if ((insn & 0xffbf0fff) == 0xec2d0200) /* sfmfd f0, 4, [sp!] */
+ else if ((insn & 0xffbf0fff) == 0xec2d0200 /* sfmfd f0, 4, [sp!] */
+ && gdbarch_tdep (gdbarch)->have_fpa_registers)
{
int n_saved_fp_regs;
unsigned int fp_start_reg, fp_bound_reg;
+ if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
+ break;
+
if ((insn & 0x800) == 0x800) /* N0 is set */
{
if ((insn & 0x40000) == 0x40000) /* N1 is set */
fp_bound_reg = fp_start_reg + n_saved_fp_regs;
for (; fp_start_reg < fp_bound_reg; fp_start_reg++)
{
- sp_offset -= 12;
- cache->saved_regs[fp_start_reg++].addr = sp_offset;
+ regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -12);
+ pv_area_store (stack, regs[ARM_SP_REGNUM], 12,
+ regs[fp_start_reg++]);
}
}
else if ((insn & 0xf0000000) != 0xe0000000)
continue;
}
- /* The frame size is just the negative of the offset (from the
- original SP) of the last thing thing we pushed on the stack.
- The frame offset is [new FP] - [new SP]. */
- cache->framesize = -sp_offset;
- if (cache->framereg == ARM_FP_REGNUM)
- cache->frameoffset = fp_offset - sp_offset;
+ /* The frame size is just the distance from the frame register
+ to the original stack pointer. */
+ if (pv_is_register (regs[ARM_FP_REGNUM], ARM_SP_REGNUM))
+ {
+ /* Frame pointer is fp. */
+ cache->framereg = ARM_FP_REGNUM;
+ cache->framesize = -regs[ARM_FP_REGNUM].k;
+ }
+ else if (pv_is_register (regs[ARM_SP_REGNUM], ARM_SP_REGNUM))
+ {
+ /* Try the stack pointer... this is a bit desperate. */
+ cache->framereg = ARM_SP_REGNUM;
+ cache->framesize = -regs[ARM_SP_REGNUM].k;
+ }
else
- cache->frameoffset = 0;
+ {
+ /* We're just out of luck. We don't know where the frame is. */
+ cache->framereg = -1;
+ cache->framesize = 0;
+ }
+
+ for (regno = 0; regno < ARM_FPS_REGNUM; regno++)
+ if (pv_area_find_reg (stack, gdbarch, regno, &offset))
+ cache->saved_regs[regno].addr = offset;
+
+ do_cleanups (back_to);
}
static struct arm_prologue_cache *
-arm_make_prologue_cache (struct frame_info *next_frame)
+arm_make_prologue_cache (struct frame_info *this_frame)
{
int reg;
struct arm_prologue_cache *cache;
CORE_ADDR unwound_fp;
- cache = frame_obstack_zalloc (sizeof (struct arm_prologue_cache));
- cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+ cache = FRAME_OBSTACK_ZALLOC (struct arm_prologue_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
- arm_scan_prologue (next_frame, cache);
+ arm_scan_prologue (this_frame, cache);
- unwound_fp = frame_unwind_register_unsigned (next_frame, cache->framereg);
+ unwound_fp = get_frame_register_unsigned (this_frame, cache->framereg);
if (unwound_fp == 0)
return cache;
- cache->prev_sp = unwound_fp + cache->framesize - cache->frameoffset;
+ cache->prev_sp = unwound_fp + cache->framesize;
/* Calculate actual addresses of saved registers using offsets
determined by arm_scan_prologue. */
- for (reg = 0; reg < NUM_REGS; reg++)
+ for (reg = 0; reg < gdbarch_num_regs (get_frame_arch (this_frame)); reg++)
if (trad_frame_addr_p (cache->saved_regs, reg))
cache->saved_regs[reg].addr += cache->prev_sp;
and the caller's SP when we were called. */
static void
-arm_prologue_this_id (struct frame_info *next_frame,
+arm_prologue_this_id (struct frame_info *this_frame,
void **this_cache,
struct frame_id *this_id)
{
struct arm_prologue_cache *cache;
struct frame_id id;
- CORE_ADDR func;
+ CORE_ADDR pc, func;
if (*this_cache == NULL)
- *this_cache = arm_make_prologue_cache (next_frame);
+ *this_cache = arm_make_prologue_cache (this_frame);
cache = *this_cache;
- func = frame_func_unwind (next_frame);
-
- /* This is meant to halt the backtrace at "_start". Make sure we
- don't halt it at a generic dummy frame. */
- if (func <= LOWEST_PC)
+ /* This is meant to halt the backtrace at "_start". */
+ pc = get_frame_pc (this_frame);
+ if (pc <= gdbarch_tdep (get_frame_arch (this_frame))->lowest_pc)
return;
/* If we've hit a wall, stop. */
if (cache->prev_sp == 0)
return;
+ func = get_frame_func (this_frame);
id = frame_id_build (cache->prev_sp, func);
*this_id = id;
}
-static void
-arm_prologue_prev_register (struct frame_info *next_frame,
+static struct value *
+arm_prologue_prev_register (struct frame_info *this_frame,
void **this_cache,
- int prev_regnum,
- int *optimized,
- enum lval_type *lvalp,
- CORE_ADDR *addrp,
- int *realnump,
- gdb_byte *valuep)
+ int prev_regnum)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct arm_prologue_cache *cache;
if (*this_cache == NULL)
- *this_cache = arm_make_prologue_cache (next_frame);
+ *this_cache = arm_make_prologue_cache (this_frame);
cache = *this_cache;
/* If we are asked to unwind the PC, then we need to return the LR
- instead. The saved value of PC points into this frame's
- prologue, not the next frame's resume location. */
+ instead. The prologue may save PC, but it will point into this
+ frame's prologue, not the next frame's resume location. Also
+ strip the saved T bit. A valid LR may have the low bit set, but
+ a valid PC never does. */
if (prev_regnum == ARM_PC_REGNUM)
- prev_regnum = ARM_LR_REGNUM;
+ {
+ CORE_ADDR lr;
+
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ return frame_unwind_got_constant (this_frame, prev_regnum,
+ arm_addr_bits_remove (gdbarch, lr));
+ }
/* SP is generally not saved to the stack, but this frame is
- identified by NEXT_FRAME's stack pointer at the time of the call.
+ identified by the next frame's stack pointer at the time of the call.
The value was already reconstructed into PREV_SP. */
if (prev_regnum == ARM_SP_REGNUM)
+ return frame_unwind_got_constant (this_frame, prev_regnum, cache->prev_sp);
+
+ /* The CPSR may have been changed by the call instruction and by the
+ called function. The only bit we can reconstruct is the T bit,
+ by checking the low bit of LR as of the call. This is a reliable
+ indicator of Thumb-ness except for some ARM v4T pre-interworking
+ Thumb code, which could get away with a clear low bit as long as
+ the called function did not use bx. Guess that all other
+ bits are unchanged; the condition flags are presumably lost,
+ but the processor status is likely valid. */
+ if (prev_regnum == ARM_PS_REGNUM)
{
- *lvalp = not_lval;
- if (valuep)
- store_unsigned_integer (valuep, 4, cache->prev_sp);
- return;
+ CORE_ADDR lr, cpsr;
+
+ cpsr = get_frame_register_unsigned (this_frame, prev_regnum);
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ if (IS_THUMB_ADDR (lr))
+ cpsr |= CPSR_T;
+ else
+ cpsr &= ~CPSR_T;
+ return frame_unwind_got_constant (this_frame, prev_regnum, cpsr);
}
- trad_frame_get_prev_register (next_frame, cache->saved_regs, prev_regnum,
- optimized, lvalp, addrp, realnump, valuep);
+ return trad_frame_get_prev_register (this_frame, cache->saved_regs,
+ prev_regnum);
}
struct frame_unwind arm_prologue_unwind = {
NORMAL_FRAME,
arm_prologue_this_id,
- arm_prologue_prev_register
+ arm_prologue_prev_register,
+ NULL,
+ default_frame_sniffer
};
-static const struct frame_unwind *
-arm_prologue_unwind_sniffer (struct frame_info *next_frame)
-{
- return &arm_prologue_unwind;
-}
-
static struct arm_prologue_cache *
-arm_make_stub_cache (struct frame_info *next_frame)
+arm_make_stub_cache (struct frame_info *this_frame)
{
int reg;
struct arm_prologue_cache *cache;
CORE_ADDR unwound_fp;
- cache = frame_obstack_zalloc (sizeof (struct arm_prologue_cache));
- cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+ cache = FRAME_OBSTACK_ZALLOC (struct arm_prologue_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
- cache->prev_sp = frame_unwind_register_unsigned (next_frame, ARM_SP_REGNUM);
+ cache->prev_sp = get_frame_register_unsigned (this_frame, ARM_SP_REGNUM);
return cache;
}
/* Our frame ID for a stub frame is the current SP and LR. */
static void
-arm_stub_this_id (struct frame_info *next_frame,
+arm_stub_this_id (struct frame_info *this_frame,
void **this_cache,
struct frame_id *this_id)
{
struct arm_prologue_cache *cache;
if (*this_cache == NULL)
- *this_cache = arm_make_stub_cache (next_frame);
+ *this_cache = arm_make_stub_cache (this_frame);
cache = *this_cache;
- *this_id = frame_id_build (cache->prev_sp,
- frame_pc_unwind (next_frame));
+ *this_id = frame_id_build (cache->prev_sp, get_frame_pc (this_frame));
}
-struct frame_unwind arm_stub_unwind = {
- NORMAL_FRAME,
- arm_stub_this_id,
- arm_prologue_prev_register
-};
-
-static const struct frame_unwind *
-arm_stub_unwind_sniffer (struct frame_info *next_frame)
+static int
+arm_stub_unwind_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame,
+ void **this_prologue_cache)
{
+ CORE_ADDR addr_in_block;
char dummy[4];
- if (in_plt_section (frame_unwind_address_in_block (next_frame), NULL)
- || target_read_memory (frame_pc_unwind (next_frame), dummy, 4) != 0)
- return &arm_stub_unwind;
+ addr_in_block = get_frame_address_in_block (this_frame);
+ if (in_plt_section (addr_in_block, NULL)
+ || target_read_memory (get_frame_pc (this_frame), dummy, 4) != 0)
+ return 1;
- return NULL;
+ return 0;
}
+struct frame_unwind arm_stub_unwind = {
+ NORMAL_FRAME,
+ arm_stub_this_id,
+ arm_prologue_prev_register,
+ NULL,
+ arm_stub_unwind_sniffer
+};
+
static CORE_ADDR
-arm_normal_frame_base (struct frame_info *next_frame, void **this_cache)
+arm_normal_frame_base (struct frame_info *this_frame, void **this_cache)
{
struct arm_prologue_cache *cache;
if (*this_cache == NULL)
- *this_cache = arm_make_prologue_cache (next_frame);
+ *this_cache = arm_make_prologue_cache (this_frame);
cache = *this_cache;
- return cache->prev_sp + cache->frameoffset - cache->framesize;
+ return cache->prev_sp - cache->framesize;
}
struct frame_base arm_normal_base = {
arm_normal_frame_base
};
-/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
+/* Assuming THIS_FRAME is a dummy, return the frame ID of that
dummy frame. The frame ID's base needs to match the TOS value
saved by save_dummy_frame_tos() and returned from
arm_push_dummy_call, and the PC needs to match the dummy frame's
breakpoint. */
static struct frame_id
-arm_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+arm_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
- return frame_id_build (frame_unwind_register_unsigned (next_frame, ARM_SP_REGNUM),
- frame_pc_unwind (next_frame));
+ return frame_id_build (get_frame_register_unsigned (this_frame, ARM_SP_REGNUM),
+ get_frame_pc (this_frame));
}
/* Given THIS_FRAME, find the previous frame's resume PC (which will
{
CORE_ADDR pc;
pc = frame_unwind_register_unsigned (this_frame, ARM_PC_REGNUM);
- return IS_THUMB_ADDR (pc) ? UNMAKE_THUMB_ADDR (pc) : pc;
+ return arm_addr_bits_remove (gdbarch, pc);
}
static CORE_ADDR
return frame_unwind_register_unsigned (this_frame, ARM_SP_REGNUM);
}
+static struct value *
+arm_dwarf2_prev_register (struct frame_info *this_frame, void **this_cache,
+ int regnum)
+{
+ struct gdbarch * gdbarch = get_frame_arch (this_frame);
+ CORE_ADDR lr, cpsr;
+
+ switch (regnum)
+ {
+ case ARM_PC_REGNUM:
+ /* The PC is normally copied from the return column, which
+ describes saves of LR. However, that version may have an
+ extra bit set to indicate Thumb state. The bit is not
+ part of the PC. */
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ return frame_unwind_got_constant (this_frame, regnum,
+ arm_addr_bits_remove (gdbarch, lr));
+
+ case ARM_PS_REGNUM:
+ /* Reconstruct the T bit; see arm_prologue_prev_register for details. */
+ cpsr = get_frame_register_unsigned (this_frame, regnum);
+ lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
+ if (IS_THUMB_ADDR (lr))
+ cpsr |= CPSR_T;
+ else
+ cpsr &= ~CPSR_T;
+ return frame_unwind_got_constant (this_frame, regnum, cpsr);
+
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("Unexpected register %d"), regnum);
+ }
+}
+
+static void
+arm_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
+ struct dwarf2_frame_state_reg *reg,
+ struct frame_info *this_frame)
+{
+ switch (regnum)
+ {
+ case ARM_PC_REGNUM:
+ case ARM_PS_REGNUM:
+ reg->how = DWARF2_FRAME_REG_FN;
+ reg->loc.fn = arm_dwarf2_prev_register;
+ break;
+ case ARM_SP_REGNUM:
+ reg->how = DWARF2_FRAME_REG_CFA;
+ break;
+ }
+}
+
/* When arguments must be pushed onto the stack, they go on in reverse
order. The code below implements a FILO (stack) to do this. */
argreg = ARM_A1_REGNUM;
nstack = 0;
- /* Some platforms require a double-word aligned stack. Make sure sp
- is correctly aligned before we start. We always do this even if
- it isn't really needed -- it can never hurt things. */
- sp &= ~(CORE_ADDR)(2 * DEPRECATED_REGISTER_SIZE - 1);
-
/* The struct_return pointer occupies the first parameter
passing register. */
if (struct_return)
{
if (arm_debug)
fprintf_unfiltered (gdb_stdlog, "struct return in %s = 0x%s\n",
- REGISTER_NAME (argreg), paddr (struct_addr));
+ gdbarch_register_name (gdbarch, argreg),
+ paddr (struct_addr));
regcache_cooked_write_unsigned (regcache, argreg, struct_addr);
argreg++;
}
registers and stack. */
while (len > 0)
{
- int partial_len = len < DEPRECATED_REGISTER_SIZE ? len : DEPRECATED_REGISTER_SIZE;
+ int partial_len = len < INT_REGISTER_SIZE ? len : INT_REGISTER_SIZE;
if (argreg <= ARM_LAST_ARG_REGNUM)
{
/* The argument is being passed in a general purpose
register. */
CORE_ADDR regval = extract_unsigned_integer (val, partial_len);
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ regval <<= (INT_REGISTER_SIZE - partial_len) * 8;
if (arm_debug)
fprintf_unfiltered (gdb_stdlog, "arg %d in %s = 0x%s\n",
- argnum, REGISTER_NAME (argreg),
- phex (regval, DEPRECATED_REGISTER_SIZE));
+ argnum,
+ gdbarch_register_name
+ (gdbarch, argreg),
+ phex (regval, INT_REGISTER_SIZE));
regcache_cooked_write_unsigned (regcache, argreg, regval);
argreg++;
}
if (arm_debug)
fprintf_unfiltered (gdb_stdlog, "arg %d @ sp + %d\n",
argnum, nstack);
- si = push_stack_item (si, val, DEPRECATED_REGISTER_SIZE);
- nstack += DEPRECATED_REGISTER_SIZE;
+ si = push_stack_item (si, val, INT_REGISTER_SIZE);
+ nstack += INT_REGISTER_SIZE;
}
len -= partial_len;
return sp;
}
+
+/* Always align the frame to an 8-byte boundary. This is required on
+ some platforms and harmless on the rest. */
+
+static CORE_ADDR
+arm_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
+{
+ /* Align the stack to eight bytes. */
+ return sp & ~ (CORE_ADDR) 7;
+}
+
static void
print_fpu_flags (int flags)
{
arm_print_float_info (struct gdbarch *gdbarch, struct ui_file *file,
struct frame_info *frame, const char *args)
{
- unsigned long status = read_register (ARM_FPS_REGNUM);
+ unsigned long status = get_frame_register_unsigned (frame, ARM_FPS_REGNUM);
int type;
type = (status >> 24) & 127;
arm_register_type (struct gdbarch *gdbarch, int regnum)
{
if (regnum >= ARM_F0_REGNUM && regnum < ARM_F0_REGNUM + NUM_FREGS)
- {
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- return builtin_type_arm_ext_big;
- else
- return builtin_type_arm_ext_littlebyte_bigword;
- }
+ return builtin_type_arm_ext;
+ else if (regnum == ARM_SP_REGNUM)
+ return builtin_type (gdbarch)->builtin_data_ptr;
+ else if (regnum == ARM_PC_REGNUM)
+ return builtin_type (gdbarch)->builtin_func_ptr;
+ else if (regnum >= ARRAY_SIZE (arm_register_names))
+ /* These registers are only supported on targets which supply
+ an XML description. */
+ return builtin_type_int0;
else
- return builtin_type_int32;
+ return builtin_type_uint32;
}
-/* Index within `registers' of the first byte of the space for
- register N. */
+/* Map a DWARF register REGNUM onto the appropriate GDB register
+ number. */
static int
-arm_register_byte (int regnum)
+arm_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
{
- if (regnum < ARM_F0_REGNUM)
- return regnum * INT_REGISTER_SIZE;
- else if (regnum < ARM_PS_REGNUM)
- return (NUM_GREGS * INT_REGISTER_SIZE
- + (regnum - ARM_F0_REGNUM) * FP_REGISTER_SIZE);
- else
- return (NUM_GREGS * INT_REGISTER_SIZE
- + NUM_FREGS * FP_REGISTER_SIZE
- + (regnum - ARM_FPS_REGNUM) * STATUS_REGISTER_SIZE);
+ /* Core integer regs. */
+ if (reg >= 0 && reg <= 15)
+ return reg;
+
+ /* Legacy FPA encoding. These were once used in a way which
+ overlapped with VFP register numbering, so their use is
+ discouraged, but GDB doesn't support the ARM toolchain
+ which used them for VFP. */
+ if (reg >= 16 && reg <= 23)
+ return ARM_F0_REGNUM + reg - 16;
+
+ /* New assignments for the FPA registers. */
+ if (reg >= 96 && reg <= 103)
+ return ARM_F0_REGNUM + reg - 96;
+
+ /* WMMX register assignments. */
+ if (reg >= 104 && reg <= 111)
+ return ARM_WCGR0_REGNUM + reg - 104;
+
+ if (reg >= 112 && reg <= 127)
+ return ARM_WR0_REGNUM + reg - 112;
+
+ if (reg >= 192 && reg <= 199)
+ return ARM_WC0_REGNUM + reg - 192;
+
+ return -1;
}
/* Map GDB internal REGNUM onto the Arm simulator register numbers. */
static int
-arm_register_sim_regno (int regnum)
+arm_register_sim_regno (struct gdbarch *gdbarch, int regnum)
{
int reg = regnum;
- gdb_assert (reg >= 0 && reg < NUM_REGS);
+ gdb_assert (reg >= 0 && reg < gdbarch_num_regs (gdbarch));
+
+ if (regnum >= ARM_WR0_REGNUM && regnum <= ARM_WR15_REGNUM)
+ return regnum - ARM_WR0_REGNUM + SIM_ARM_IWMMXT_COP0R0_REGNUM;
+
+ if (regnum >= ARM_WC0_REGNUM && regnum <= ARM_WC7_REGNUM)
+ return regnum - ARM_WC0_REGNUM + SIM_ARM_IWMMXT_COP1R0_REGNUM;
+
+ if (regnum >= ARM_WCGR0_REGNUM && regnum <= ARM_WCGR7_REGNUM)
+ return regnum - ARM_WCGR0_REGNUM + SIM_ARM_IWMMXT_COP1R8_REGNUM;
if (reg < NUM_GREGS)
return SIM_ARM_R0_REGNUM + reg;
static void
convert_from_extended (const struct floatformat *fmt, const void *ptr,
- void *dbl)
+ void *dbl, int endianess)
{
DOUBLEST d;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+
+ if (endianess == BFD_ENDIAN_BIG)
floatformat_to_doublest (&floatformat_arm_ext_big, ptr, &d);
else
floatformat_to_doublest (&floatformat_arm_ext_littlebyte_bigword,
}
static void
-convert_to_extended (const struct floatformat *fmt, void *dbl, const void *ptr)
+convert_to_extended (const struct floatformat *fmt, void *dbl, const void *ptr,
+ int endianess)
{
DOUBLEST d;
+
floatformat_to_doublest (fmt, ptr, &d);
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ if (endianess == BFD_ENDIAN_BIG)
floatformat_from_doublest (&floatformat_arm_ext_big, &d, dbl);
else
floatformat_from_doublest (&floatformat_arm_ext_littlebyte_bigword,
#define ARM_PC_32 1
static unsigned long
-shifted_reg_val (unsigned long inst, int carry, unsigned long pc_val,
- unsigned long status_reg)
+shifted_reg_val (struct frame_info *frame, unsigned long inst, int carry,
+ unsigned long pc_val, unsigned long status_reg)
{
unsigned long res, shift;
int rm = bits (inst, 0, 3);
if (bit (inst, 4))
{
int rs = bits (inst, 8, 11);
- shift = (rs == 15 ? pc_val + 8 : read_register (rs)) & 0xFF;
+ shift = (rs == 15 ? pc_val + 8
+ : get_frame_register_unsigned (frame, rs)) & 0xFF;
}
else
shift = bits (inst, 7, 11);
res = (rm == 15
? ((pc_val | (ARM_PC_32 ? 0 : status_reg))
+ (bit (inst, 4) ? 12 : 8))
- : read_register (rm));
+ : get_frame_register_unsigned (frame, rm));
switch (shifttype)
{
return nbits;
}
-CORE_ADDR
-thumb_get_next_pc (CORE_ADDR pc)
+static CORE_ADDR
+thumb_get_next_pc (struct frame_info *frame, CORE_ADDR pc)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
unsigned short inst1 = read_memory_unsigned_integer (pc, 2);
CORE_ADDR nextpc = pc + 2; /* default is next instruction */
unsigned long offset;
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ inst1 = SWAP_SHORT (inst1);
+
if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
{
CORE_ADDR sp;
/* Fetch the saved PC from the stack. It's stored above
all of the other registers. */
- offset = bitcount (bits (inst1, 0, 7)) * DEPRECATED_REGISTER_SIZE;
- sp = read_register (ARM_SP_REGNUM);
+ offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
+ sp = get_frame_register_unsigned (frame, ARM_SP_REGNUM);
nextpc = (CORE_ADDR) read_memory_unsigned_integer (sp + offset, 4);
- nextpc = ADDR_BITS_REMOVE (nextpc);
+ nextpc = gdbarch_addr_bits_remove (gdbarch, nextpc);
if (nextpc == pc)
error (_("Infinite loop detected"));
}
else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
{
- unsigned long status = read_register (ARM_PS_REGNUM);
+ unsigned long status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
unsigned long cond = bits (inst1, 8, 11);
if (cond != 0x0f && condition_true (cond, status)) /* 0x0f = SWI */
nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
else if ((inst1 & 0xf800) == 0xf000) /* long branch with link, and blx */
{
unsigned short inst2 = read_memory_unsigned_integer (pc + 2, 2);
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ inst2 = SWAP_SHORT (inst2);
offset = (sbits (inst1, 0, 10) << 12) + (bits (inst2, 0, 10) << 1);
nextpc = pc_val + offset;
/* For BLX make sure to clear the low bits. */
if (bits (inst1, 3, 6) == 0x0f)
nextpc = pc_val;
else
- nextpc = read_register (bits (inst1, 3, 6));
+ nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
- nextpc = ADDR_BITS_REMOVE (nextpc);
+ nextpc = gdbarch_addr_bits_remove (gdbarch, nextpc);
if (nextpc == pc)
error (_("Infinite loop detected"));
}
}
CORE_ADDR
-arm_get_next_pc (CORE_ADDR pc)
+arm_get_next_pc (struct frame_info *frame, CORE_ADDR pc)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
unsigned long pc_val;
unsigned long this_instr;
unsigned long status;
CORE_ADDR nextpc;
- if (arm_pc_is_thumb (pc))
- return thumb_get_next_pc (pc);
+ if (arm_frame_is_thumb (frame))
+ return thumb_get_next_pc (frame, pc);
pc_val = (unsigned long) pc;
this_instr = read_memory_unsigned_integer (pc, 4);
- status = read_register (ARM_PS_REGNUM);
+
+ if (gdbarch_byte_order_for_code (gdbarch) != gdbarch_byte_order (gdbarch))
+ this_instr = SWAP_INT (this_instr);
+
+ status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
- if (condition_true (bits (this_instr, 28, 31), status))
+ if (bits (this_instr, 28, 31) == INST_NV)
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0xa:
+ case 0xb:
+ {
+ /* Branch with Link and change to Thumb. */
+ nextpc = BranchDest (pc, this_instr);
+ nextpc |= bit (this_instr, 24) << 1;
+
+ nextpc = gdbarch_addr_bits_remove (gdbarch, nextpc);
+ if (nextpc == pc)
+ error (_("Infinite loop detected"));
+ break;
+ }
+ case 0xc:
+ case 0xd:
+ case 0xe:
+ /* Coprocessor register transfer. */
+ if (bits (this_instr, 12, 15) == 15)
+ error (_("Invalid update to pc in instruction"));
+ break;
+ }
+ else if (condition_true (bits (this_instr, 28, 31), status))
{
switch (bits (this_instr, 24, 27))
{
error (_("Invalid update to pc in instruction"));
/* BX <reg>, BLX <reg> */
- if (bits (this_instr, 4, 28) == 0x12fff1
- || bits (this_instr, 4, 28) == 0x12fff3)
+ if (bits (this_instr, 4, 27) == 0x12fff1
+ || bits (this_instr, 4, 27) == 0x12fff3)
{
rn = bits (this_instr, 0, 3);
- result = (rn == 15) ? pc_val + 8 : read_register (rn);
- nextpc = (CORE_ADDR) ADDR_BITS_REMOVE (result);
+ result = (rn == 15) ? pc_val + 8
+ : get_frame_register_unsigned (frame, rn);
+ nextpc = (CORE_ADDR) gdbarch_addr_bits_remove
+ (gdbarch, result);
if (nextpc == pc)
error (_("Infinite loop detected"));
/* Multiply into PC */
c = (status & FLAG_C) ? 1 : 0;
rn = bits (this_instr, 16, 19);
- operand1 = (rn == 15) ? pc_val + 8 : read_register (rn);
+ operand1 = (rn == 15) ? pc_val + 8
+ : get_frame_register_unsigned (frame, rn);
if (bit (this_instr, 25))
{
& 0xffffffff;
}
else /* operand 2 is a shifted register */
- operand2 = shifted_reg_val (this_instr, c, pc_val, status);
+ operand2 = shifted_reg_val (frame, this_instr, c, pc_val, status);
switch (bits (this_instr, 21, 24))
{
result = ~operand2;
break;
}
- nextpc = (CORE_ADDR) ADDR_BITS_REMOVE (result);
+ nextpc = (CORE_ADDR) gdbarch_addr_bits_remove
+ (gdbarch, result);
if (nextpc == pc)
error (_("Infinite loop detected"));
/* byte write to PC */
rn = bits (this_instr, 16, 19);
- base = (rn == 15) ? pc_val + 8 : read_register (rn);
+ base = (rn == 15) ? pc_val + 8
+ : get_frame_register_unsigned (frame, rn);
if (bit (this_instr, 24))
{
/* pre-indexed */
int c = (status & FLAG_C) ? 1 : 0;
unsigned long offset =
(bit (this_instr, 25)
- ? shifted_reg_val (this_instr, c, pc_val, status)
+ ? shifted_reg_val (frame, this_instr, c, pc_val, status)
: bits (this_instr, 0, 11));
if (bit (this_instr, 23))
nextpc = (CORE_ADDR) read_memory_integer ((CORE_ADDR) base,
4);
- nextpc = ADDR_BITS_REMOVE (nextpc);
+ nextpc = gdbarch_addr_bits_remove (gdbarch, nextpc);
if (nextpc == pc)
error (_("Infinite loop detected"));
{
unsigned long rn_val =
- read_register (bits (this_instr, 16, 19));
+ get_frame_register_unsigned (frame,
+ bits (this_instr, 16, 19));
nextpc =
(CORE_ADDR) read_memory_integer ((CORE_ADDR) (rn_val
+ offset),
4);
}
- nextpc = ADDR_BITS_REMOVE (nextpc);
+ nextpc = gdbarch_addr_bits_remove
+ (gdbarch, nextpc);
if (nextpc == pc)
error (_("Infinite loop detected"));
}
{
nextpc = BranchDest (pc, this_instr);
- /* BLX */
- if (bits (this_instr, 28, 31) == INST_NV)
- nextpc |= bit (this_instr, 24) << 1;
-
- nextpc = ADDR_BITS_REMOVE (nextpc);
+ nextpc = gdbarch_addr_bits_remove (gdbarch, nextpc);
if (nextpc == pc)
error (_("Infinite loop detected"));
break;
/* single_step() is called just before we want to resume the inferior,
if we want to single-step it but there is no hardware or kernel
single-step support. We find the target of the coming instruction
- and breakpoint it.
+ and breakpoint it. */
- single_step() is also called just after the inferior stops. If we
- had set up a simulated single-step, we undo our damage. */
-
-static void
-arm_software_single_step (enum target_signal sig, int insert_bpt)
+int
+arm_software_single_step (struct frame_info *frame)
{
- static int next_pc; /* State between setting and unsetting. */
- static char break_mem[BREAKPOINT_MAX]; /* Temporary storage for mem@bpt */
+ /* NOTE: This may insert the wrong breakpoint instruction when
+ single-stepping over a mode-changing instruction, if the
+ CPSR heuristics are used. */
- if (insert_bpt)
- {
- next_pc = arm_get_next_pc (read_register (ARM_PC_REGNUM));
- target_insert_breakpoint (next_pc, break_mem);
- }
- else
- target_remove_breakpoint (next_pc, break_mem);
+ CORE_ADDR next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
+ insert_single_step_breakpoint (next_pc);
+
+ return 1;
}
#include "bfd-in2.h"
else
info->symbols = NULL;
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ if (info->endian == BFD_ENDIAN_BIG)
return print_insn_big_arm (memaddr, info);
else
return print_insn_little_arm (memaddr, info);
instruction to force a trap. This can be handled by by the
abi-specific code during establishment of the gdbarch vector. */
-
-/* NOTE rearnsha 2002-02-18: for now we allow a non-multi-arch gdb to
- override these definitions. */
-#ifndef ARM_LE_BREAKPOINT
#define ARM_LE_BREAKPOINT {0xFE,0xDE,0xFF,0xE7}
-#endif
-#ifndef ARM_BE_BREAKPOINT
#define ARM_BE_BREAKPOINT {0xE7,0xFF,0xDE,0xFE}
-#endif
-#ifndef THUMB_LE_BREAKPOINT
-#define THUMB_LE_BREAKPOINT {0xfe,0xdf}
-#endif
-#ifndef THUMB_BE_BREAKPOINT
-#define THUMB_BE_BREAKPOINT {0xdf,0xfe}
-#endif
+#define THUMB_LE_BREAKPOINT {0xbe,0xbe}
+#define THUMB_BE_BREAKPOINT {0xbe,0xbe}
static const char arm_default_arm_le_breakpoint[] = ARM_LE_BREAKPOINT;
static const char arm_default_arm_be_breakpoint[] = ARM_BE_BREAKPOINT;
necessary) to point to the actual memory location where the
breakpoint should be inserted. */
-/* XXX ??? from old tm-arm.h: if we're using RDP, then we're inserting
- breakpoints and storing their handles instread of what was in
- memory. It is nice that this is the same size as a handle -
- otherwise remote-rdp will have to change. */
-
static const unsigned char *
-arm_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+arm_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (arm_pc_is_thumb (*pcptr))
{
arm_extract_return_value (struct type *type, struct regcache *regs,
gdb_byte *valbuf)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regs);
+
if (TYPE_CODE_FLT == TYPE_CODE (type))
{
- switch (gdbarch_tdep (current_gdbarch)->fp_model)
+ switch (gdbarch_tdep (gdbarch)->fp_model)
{
case ARM_FLOAT_FPA:
{
regcache_cooked_read (regs, ARM_F0_REGNUM, tmpbuf);
convert_from_extended (floatformat_from_type (type), tmpbuf,
- valbuf);
+ valbuf, gdbarch_byte_order (gdbarch));
}
break;
/* In the ARM ABI, "integer" like aggregate types are returned in
registers. For an aggregate type to be integer like, its size
- must be less than or equal to DEPRECATED_REGISTER_SIZE and the
+ must be less than or equal to INT_REGISTER_SIZE and the
offset of each addressable subfield must be zero. Note that bit
fields are not addressable, and all addressable subfields of
unions always start at offset zero.
/* All aggregate types that won't fit in a register must be returned
in memory. */
- if (TYPE_LENGTH (type) > DEPRECATED_REGISTER_SIZE)
+ if (TYPE_LENGTH (type) > INT_REGISTER_SIZE)
{
return 1;
}
int i;
/* Need to check if this struct/union is "integer" like. For
this to be true, its size must be less than or equal to
- DEPRECATED_REGISTER_SIZE and the offset of each addressable
+ INT_REGISTER_SIZE and the offset of each addressable
subfield must be zero. Note that bit fields are not
addressable, and unions always start at offset zero. If any
of the subfields is a floating point type, the struct/union
arm_store_return_value (struct type *type, struct regcache *regs,
const gdb_byte *valbuf)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regs);
+
if (TYPE_CODE (type) == TYPE_CODE_FLT)
{
char buf[MAX_REGISTER_SIZE];
- switch (gdbarch_tdep (current_gdbarch)->fp_model)
+ switch (gdbarch_tdep (gdbarch)->fp_model)
{
case ARM_FLOAT_FPA:
- convert_to_extended (floatformat_from_type (type), buf, valbuf);
+ convert_to_extended (floatformat_from_type (type), buf, valbuf,
+ gdbarch_byte_order (gdbarch));
regcache_cooked_write (regs, ARM_F0_REGNUM, buf);
break;
/* Handle function return values. */
static enum return_value_convention
-arm_return_value (struct gdbarch *gdbarch, struct type *valtype,
- struct regcache *regcache, gdb_byte *readbuf,
- const gdb_byte *writebuf)
+arm_return_value (struct gdbarch *gdbarch, struct type *func_type,
+ struct type *valtype, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
if (TYPE_CODE (valtype) == TYPE_CODE_STRUCT
|| TYPE_CODE (valtype) == TYPE_CODE_UNION
|| TYPE_CODE (valtype) == TYPE_CODE_ARRAY)
{
- if (arm_return_in_memory (gdbarch, valtype))
+ if (tdep->struct_return == pcc_struct_return
+ || arm_return_in_memory (gdbarch, valtype))
return RETURN_VALUE_STRUCT_CONVENTION;
}
static int
-arm_get_longjmp_target (CORE_ADDR *pc)
+arm_get_longjmp_target (struct frame_info *frame, CORE_ADDR *pc)
{
CORE_ADDR jb_addr;
char buf[INT_REGISTER_SIZE];
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame));
- jb_addr = read_register (ARM_A1_REGNUM);
+ jb_addr = get_frame_register_unsigned (frame, ARM_A1_REGNUM);
if (target_read_memory (jb_addr + tdep->jb_pc * tdep->jb_elt_size, buf,
INT_REGISTER_SIZE))
return 1;
}
-/* Return non-zero if the PC is inside a thumb call thunk. */
-
-int
-arm_in_call_stub (CORE_ADDR pc, char *name)
-{
- CORE_ADDR start_addr;
-
- /* Find the starting address of the function containing the PC. If
- the caller didn't give us a name, look it up at the same time. */
- if (0 == find_pc_partial_function (pc, name ? NULL : &name,
- &start_addr, NULL))
- return 0;
-
- return strncmp (name, "_call_via_r", 11) == 0;
-}
-
-/* If PC is in a Thumb call or return stub, return the address of the
- target PC, which is in a register. The thunk functions are called
- _called_via_xx, where x is the register name. The possible names
- are r0-r9, sl, fp, ip, sp, and lr. */
+/* Recognize GCC and GNU ld's trampolines. If we are in a trampoline,
+ return the target PC. Otherwise return 0. */
CORE_ADDR
-arm_skip_stub (CORE_ADDR pc)
+arm_skip_stub (struct frame_info *frame, CORE_ADDR pc)
{
char *name;
+ int namelen;
CORE_ADDR start_addr;
/* Find the starting address and name of the function containing the PC. */
if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
return 0;
- /* Call thunks always start with "_call_via_". */
+ /* If PC is in a Thumb call or return stub, return the address of the
+ target PC, which is in a register. The thunk functions are called
+ _call_via_xx, where x is the register name. The possible names
+ are r0-r9, sl, fp, ip, sp, and lr. */
if (strncmp (name, "_call_via_", 10) == 0)
{
/* Use the name suffix to determine which register contains the
"r8", "r9", "sl", "fp", "ip", "sp", "lr"
};
int regno;
+ int offset = strlen (name) - 2;
for (regno = 0; regno <= 14; regno++)
- if (strcmp (&name[10], table[regno]) == 0)
- return read_register (regno);
+ if (strcmp (&name[offset], table[regno]) == 0)
+ return get_frame_register_unsigned (frame, regno);
+ }
+
+ /* GNU ld generates __foo_from_arm or __foo_from_thumb for
+ non-interworking calls to foo. We could decode the stubs
+ to find the target but it's easier to use the symbol table. */
+ namelen = strlen (name);
+ if (name[0] == '_' && name[1] == '_'
+ && ((namelen > 2 + strlen ("_from_thumb")
+ && strncmp (name + namelen - strlen ("_from_thumb"), "_from_thumb",
+ strlen ("_from_thumb")) == 0)
+ || (namelen > 2 + strlen ("_from_arm")
+ && strncmp (name + namelen - strlen ("_from_arm"), "_from_arm",
+ strlen ("_from_arm")) == 0)))
+ {
+ char *target_name;
+ int target_len = namelen - 2;
+ struct minimal_symbol *minsym;
+ struct objfile *objfile;
+ struct obj_section *sec;
+
+ if (name[namelen - 1] == 'b')
+ target_len -= strlen ("_from_thumb");
+ else
+ target_len -= strlen ("_from_arm");
+
+ target_name = alloca (target_len + 1);
+ memcpy (target_name, name + 2, target_len);
+ target_name[target_len] = '\0';
+
+ sec = find_pc_section (pc);
+ objfile = (sec == NULL) ? NULL : sec->objfile;
+ minsym = lookup_minimal_symbol (target_name, NULL, objfile);
+ if (minsym != NULL)
+ return SYMBOL_VALUE_ADDRESS (minsym);
+ else
+ return 0;
}
return 0; /* not a stub */
struct gdbarch_info info;
/* If the current architecture is not ARM, we have nothing to do. */
- if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_arm)
+ if (gdbarch_bfd_arch_info (target_gdbarch)->arch != bfd_arch_arm)
return;
/* Update the architecture. */
show_fp_model (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
if (arm_fp_model == ARM_FLOAT_AUTO
- && gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_arm)
+ && gdbarch_bfd_arch_info (target_gdbarch)->arch == bfd_arch_arm)
fprintf_filtered (file, _("\
The current ARM floating point model is \"auto\" (currently \"%s\").\n"),
fp_model_strings[tdep->fp_model]);
arm_show_abi (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
if (arm_abi_global == ARM_ABI_AUTO
- && gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_arm)
+ && gdbarch_bfd_arch_info (target_gdbarch)->arch == bfd_arch_arm)
fprintf_filtered (file, _("\
The current ARM ABI is \"auto\" (currently \"%s\").\n"),
arm_abi_strings[tdep->arm_abi]);
arm_abi_string);
}
+static void
+arm_show_fallback_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
+
+ fprintf_filtered (file, _("\
+The current execution mode assumed (when symbols are unavailable) is \"%s\".\n"),
+ arm_fallback_mode_string);
+}
+
+static void
+arm_show_force_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (target_gdbarch);
+
+ fprintf_filtered (file, _("\
+The current execution mode assumed (even when symbols are available) is \"%s\".\n"),
+ arm_force_mode_string);
+}
+
/* If the user changes the register disassembly style used for info
register and other commands, we have to also switch the style used
in opcodes for disassembly output. This function is run in the "set
\f
/* Return the ARM register name corresponding to register I. */
static const char *
-arm_register_name (int i)
+arm_register_name (struct gdbarch *gdbarch, int i)
{
+ if (i >= ARRAY_SIZE (arm_register_names))
+ /* These registers are only supported on targets which supply
+ an XML description. */
+ return "";
+
return arm_register_names[i];
}
static void
set_disassembly_style (void)
{
- const char *setname, *setdesc, *const *regnames;
- int numregs, j;
-
- /* Find the style that the user wants in the opcodes table. */
- int current = 0;
- numregs = get_arm_regnames (current, &setname, &setdesc, ®names);
- while ((disassembly_style != setname)
- && (current < num_disassembly_options))
- get_arm_regnames (++current, &setname, &setdesc, ®names);
- current_option = current;
-
- /* Fill our copy. */
- for (j = 0; j < numregs; j++)
- arm_register_names[j] = (char *) regnames[j];
+ int current;
- /* Adjust case. */
- if (isupper (*regnames[ARM_PC_REGNUM]))
- {
- arm_register_names[ARM_FPS_REGNUM] = "FPS";
- arm_register_names[ARM_PS_REGNUM] = "CPSR";
- }
- else
- {
- arm_register_names[ARM_FPS_REGNUM] = "fps";
- arm_register_names[ARM_PS_REGNUM] = "cpsr";
- }
+ /* Find the style that the user wants. */
+ for (current = 0; current < num_disassembly_options; current++)
+ if (disassembly_style == valid_disassembly_styles[current])
+ break;
+ gdb_assert (current < num_disassembly_options);
/* Synchronize the disassembler. */
set_arm_regname_option (current);
}
static void
-arm_write_pc (CORE_ADDR pc, ptid_t ptid)
+arm_objfile_data_cleanup (struct objfile *objfile, void *arg)
+{
+ struct arm_per_objfile *data = arg;
+ unsigned int i;
+
+ for (i = 0; i < objfile->obfd->section_count; i++)
+ VEC_free (arm_mapping_symbol_s, data->section_maps[i]);
+}
+
+static void
+arm_record_special_symbol (struct gdbarch *gdbarch, struct objfile *objfile,
+ asymbol *sym)
+{
+ const char *name = bfd_asymbol_name (sym);
+ struct arm_per_objfile *data;
+ VEC(arm_mapping_symbol_s) **map_p;
+ struct arm_mapping_symbol new_map_sym;
+
+ gdb_assert (name[0] == '$');
+ if (name[1] != 'a' && name[1] != 't' && name[1] != 'd')
+ return;
+
+ data = objfile_data (objfile, arm_objfile_data_key);
+ if (data == NULL)
+ {
+ data = OBSTACK_ZALLOC (&objfile->objfile_obstack,
+ struct arm_per_objfile);
+ set_objfile_data (objfile, arm_objfile_data_key, data);
+ data->section_maps = OBSTACK_CALLOC (&objfile->objfile_obstack,
+ objfile->obfd->section_count,
+ VEC(arm_mapping_symbol_s) *);
+ }
+ map_p = &data->section_maps[bfd_get_section (sym)->index];
+
+ new_map_sym.value = sym->value;
+ new_map_sym.type = name[1];
+
+ /* Assume that most mapping symbols appear in order of increasing
+ value. If they were randomly distributed, it would be faster to
+ always push here and then sort at first use. */
+ if (!VEC_empty (arm_mapping_symbol_s, *map_p))
+ {
+ struct arm_mapping_symbol *prev_map_sym;
+
+ prev_map_sym = VEC_last (arm_mapping_symbol_s, *map_p);
+ if (prev_map_sym->value >= sym->value)
+ {
+ unsigned int idx;
+ idx = VEC_lower_bound (arm_mapping_symbol_s, *map_p, &new_map_sym,
+ arm_compare_mapping_symbols);
+ VEC_safe_insert (arm_mapping_symbol_s, *map_p, idx, &new_map_sym);
+ return;
+ }
+ }
+
+ VEC_safe_push (arm_mapping_symbol_s, *map_p, &new_map_sym);
+}
+
+static void
+arm_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
- write_register_pid (ARM_PC_REGNUM, pc, ptid);
+ regcache_cooked_write_unsigned (regcache, ARM_PC_REGNUM, pc);
/* If necessary, set the T bit. */
if (arm_apcs_32)
{
- CORE_ADDR val = read_register_pid (ARM_PS_REGNUM, ptid);
+ ULONGEST val;
+ regcache_cooked_read_unsigned (regcache, ARM_PS_REGNUM, &val);
if (arm_pc_is_thumb (pc))
- write_register_pid (ARM_PS_REGNUM, val | 0x20, ptid);
+ regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM, val | CPSR_T);
else
- write_register_pid (ARM_PS_REGNUM, val & ~(CORE_ADDR) 0x20, ptid);
+ regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM,
+ val & ~(ULONGEST) CPSR_T);
}
}
+
+static struct value *
+value_of_arm_user_reg (struct frame_info *frame, const void *baton)
+{
+ const int *reg_p = baton;
+ return value_of_register (*reg_p, frame);
+}
\f
static enum gdb_osabi
arm_elf_osabi_sniffer (bfd *abfd)
struct gdbarch_list *best_arch;
enum arm_abi_kind arm_abi = arm_abi_global;
enum arm_float_model fp_model = arm_fp_model;
+ struct tdesc_arch_data *tdesc_data = NULL;
+ int i;
+ int have_fpa_registers = 1;
+
+ /* Check any target description for validity. */
+ if (tdesc_has_registers (info.target_desc))
+ {
+ /* For most registers we require GDB's default names; but also allow
+ the numeric names for sp / lr / pc, as a convenience. */
+ static const char *const arm_sp_names[] = { "r13", "sp", NULL };
+ static const char *const arm_lr_names[] = { "r14", "lr", NULL };
+ static const char *const arm_pc_names[] = { "r15", "pc", NULL };
+
+ const struct tdesc_feature *feature;
+ int i, valid_p;
+
+ feature = tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.arm.core");
+ if (feature == NULL)
+ return NULL;
+
+ tdesc_data = tdesc_data_alloc ();
+
+ valid_p = 1;
+ for (i = 0; i < ARM_SP_REGNUM; i++)
+ valid_p &= tdesc_numbered_register (feature, tdesc_data, i,
+ arm_register_names[i]);
+ valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
+ ARM_SP_REGNUM,
+ arm_sp_names);
+ valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
+ ARM_LR_REGNUM,
+ arm_lr_names);
+ valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
+ ARM_PC_REGNUM,
+ arm_pc_names);
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ ARM_PS_REGNUM, "cpsr");
+
+ if (!valid_p)
+ {
+ tdesc_data_cleanup (tdesc_data);
+ return NULL;
+ }
+
+ feature = tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.arm.fpa");
+ if (feature != NULL)
+ {
+ valid_p = 1;
+ for (i = ARM_F0_REGNUM; i <= ARM_FPS_REGNUM; i++)
+ valid_p &= tdesc_numbered_register (feature, tdesc_data, i,
+ arm_register_names[i]);
+ if (!valid_p)
+ {
+ tdesc_data_cleanup (tdesc_data);
+ return NULL;
+ }
+ }
+ else
+ have_fpa_registers = 0;
+
+ feature = tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.xscale.iwmmxt");
+ if (feature != NULL)
+ {
+ static const char *const iwmmxt_names[] = {
+ "wR0", "wR1", "wR2", "wR3", "wR4", "wR5", "wR6", "wR7",
+ "wR8", "wR9", "wR10", "wR11", "wR12", "wR13", "wR14", "wR15",
+ "wCID", "wCon", "wCSSF", "wCASF", "", "", "", "",
+ "wCGR0", "wCGR1", "wCGR2", "wCGR3", "", "", "", "",
+ };
+
+ valid_p = 1;
+ for (i = ARM_WR0_REGNUM; i <= ARM_WR15_REGNUM; i++)
+ valid_p
+ &= tdesc_numbered_register (feature, tdesc_data, i,
+ iwmmxt_names[i - ARM_WR0_REGNUM]);
+
+ /* Check for the control registers, but do not fail if they
+ are missing. */
+ for (i = ARM_WC0_REGNUM; i <= ARM_WCASF_REGNUM; i++)
+ tdesc_numbered_register (feature, tdesc_data, i,
+ iwmmxt_names[i - ARM_WR0_REGNUM]);
+
+ for (i = ARM_WCGR0_REGNUM; i <= ARM_WCGR3_REGNUM; i++)
+ valid_p
+ &= tdesc_numbered_register (feature, tdesc_data, i,
+ iwmmxt_names[i - ARM_WR0_REGNUM]);
+
+ if (!valid_p)
+ {
+ tdesc_data_cleanup (tdesc_data);
+ return NULL;
+ }
+ }
+ }
/* If we have an object to base this architecture on, try to determine
its ABI. */
if (arm_abi == ARM_ABI_AUTO && info.abfd != NULL)
{
- int ei_osabi;
+ int ei_osabi, e_flags;
switch (bfd_get_flavour (info.abfd))
{
case bfd_target_elf_flavour:
ei_osabi = elf_elfheader (info.abfd)->e_ident[EI_OSABI];
+ e_flags = elf_elfheader (info.abfd)->e_flags;
+
if (ei_osabi == ELFOSABI_ARM)
{
/* GNU tools used to use this value, but do not for EABI
- objects. There's nowhere to tag an EABI version anyway,
- so assume APCS. */
+ objects. There's nowhere to tag an EABI version
+ anyway, so assume APCS. */
arm_abi = ARM_ABI_APCS;
}
else if (ei_osabi == ELFOSABI_NONE)
{
- int e_flags, eabi_ver;
-
- e_flags = elf_elfheader (info.abfd)->e_flags;
- eabi_ver = EF_ARM_EABI_VERSION (e_flags);
+ int eabi_ver = EF_ARM_EABI_VERSION (e_flags);
switch (eabi_ver)
{
break;
case EF_ARM_EABI_VER4:
+ case EF_ARM_EABI_VER5:
arm_abi = ARM_ABI_AAPCS;
/* EABI binaries default to VFP float ordering. */
if (fp_model == ARM_FLOAT_AUTO)
break;
default:
+ /* Leave it as "auto". */
warning (_("unknown ARM EABI version 0x%x"), eabi_ver);
- arm_abi = ARM_ABI_APCS;
break;
}
}
+
+ if (fp_model == ARM_FLOAT_AUTO)
+ {
+ int e_flags = elf_elfheader (info.abfd)->e_flags;
+
+ switch (e_flags & (EF_ARM_SOFT_FLOAT | EF_ARM_VFP_FLOAT))
+ {
+ case 0:
+ /* Leave it as "auto". Strictly speaking this case
+ means FPA, but almost nobody uses that now, and
+ many toolchains fail to set the appropriate bits
+ for the floating-point model they use. */
+ break;
+ case EF_ARM_SOFT_FLOAT:
+ fp_model = ARM_FLOAT_SOFT_FPA;
+ break;
+ case EF_ARM_VFP_FLOAT:
+ fp_model = ARM_FLOAT_VFP;
+ break;
+ case EF_ARM_SOFT_FLOAT | EF_ARM_VFP_FLOAT:
+ fp_model = ARM_FLOAT_SOFT_VFP;
+ break;
+ }
+ }
+
+ if (e_flags & EF_ARM_BE8)
+ info.byte_order_for_code = BFD_ENDIAN_LITTLE;
+
break;
default:
}
}
- /* Now that we have inferred any architecture settings that we
- can, try to inherit from the last ARM ABI. */
- if (arches != NULL)
- {
- if (arm_abi == ARM_ABI_AUTO)
- arm_abi = gdbarch_tdep (arches->gdbarch)->arm_abi;
-
- if (fp_model == ARM_FLOAT_AUTO)
- fp_model = gdbarch_tdep (arches->gdbarch)->fp_model;
- }
- else
- {
- /* There was no prior ARM architecture; fill in default values. */
-
- if (arm_abi == ARM_ABI_AUTO)
- arm_abi = ARM_ABI_APCS;
-
- /* We used to default to FPA for generic ARM, but almost nobody
- uses that now, and we now provide a way for the user to force
- the model. So default to the most useful variant. */
- if (fp_model == ARM_FLOAT_AUTO)
- fp_model = ARM_FLOAT_SOFT_FPA;
- }
-
/* If there is already a candidate, use it. */
for (best_arch = gdbarch_list_lookup_by_info (arches, &info);
best_arch != NULL;
best_arch = gdbarch_list_lookup_by_info (best_arch->next, &info))
{
- if (arm_abi != gdbarch_tdep (best_arch->gdbarch)->arm_abi)
+ if (arm_abi != ARM_ABI_AUTO
+ && arm_abi != gdbarch_tdep (best_arch->gdbarch)->arm_abi)
continue;
- if (fp_model != gdbarch_tdep (best_arch->gdbarch)->fp_model)
+ if (fp_model != ARM_FLOAT_AUTO
+ && fp_model != gdbarch_tdep (best_arch->gdbarch)->fp_model)
continue;
/* Found a match. */
}
if (best_arch != NULL)
- return best_arch->gdbarch;
+ {
+ if (tdesc_data != NULL)
+ tdesc_data_cleanup (tdesc_data);
+ return best_arch->gdbarch;
+ }
tdep = xcalloc (1, sizeof (struct gdbarch_tdep));
gdbarch = gdbarch_alloc (&info, tdep);
These are gdbarch discriminators, like the OSABI. */
tdep->arm_abi = arm_abi;
tdep->fp_model = fp_model;
+ tdep->have_fpa_registers = have_fpa_registers;
/* Breakpoints. */
- switch (info.byte_order)
+ switch (info.byte_order_for_code)
{
case BFD_ENDIAN_BIG:
tdep->arm_breakpoint = arm_default_arm_be_breakpoint;
tdep->lowest_pc = 0x20;
tdep->jb_pc = -1; /* Longjump support not enabled by default. */
+ /* The default, for both APCS and AAPCS, is to return small
+ structures in registers. */
+ tdep->struct_return = reg_struct_return;
+
set_gdbarch_push_dummy_call (gdbarch, arm_push_dummy_call);
+ set_gdbarch_frame_align (gdbarch, arm_frame_align);
set_gdbarch_write_pc (gdbarch, arm_write_pc);
/* Frame handling. */
- set_gdbarch_unwind_dummy_id (gdbarch, arm_unwind_dummy_id);
+ set_gdbarch_dummy_id (gdbarch, arm_dummy_id);
set_gdbarch_unwind_pc (gdbarch, arm_unwind_pc);
set_gdbarch_unwind_sp (gdbarch, arm_unwind_sp);
/* Advance PC across function entry code. */
set_gdbarch_skip_prologue (gdbarch, arm_skip_prologue);
- /* Get the PC when a frame might not be available. */
- set_gdbarch_deprecated_saved_pc_after_call (gdbarch, arm_saved_pc_after_call);
+ /* Skip trampolines. */
+ set_gdbarch_skip_trampoline_code (gdbarch, arm_skip_stub);
/* The stack grows downward. */
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, arm_breakpoint_from_pc);
/* Information about registers, etc. */
- set_gdbarch_print_float_info (gdbarch, arm_print_float_info);
set_gdbarch_deprecated_fp_regnum (gdbarch, ARM_FP_REGNUM); /* ??? */
set_gdbarch_sp_regnum (gdbarch, ARM_SP_REGNUM);
set_gdbarch_pc_regnum (gdbarch, ARM_PC_REGNUM);
- set_gdbarch_deprecated_register_byte (gdbarch, arm_register_byte);
- set_gdbarch_num_regs (gdbarch, NUM_GREGS + NUM_FREGS + NUM_SREGS);
+ set_gdbarch_num_regs (gdbarch, ARM_NUM_REGS);
set_gdbarch_register_type (gdbarch, arm_register_type);
+ /* This "info float" is FPA-specific. Use the generic version if we
+ do not have FPA. */
+ if (gdbarch_tdep (gdbarch)->have_fpa_registers)
+ set_gdbarch_print_float_info (gdbarch, arm_print_float_info);
+
/* Internal <-> external register number maps. */
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, arm_dwarf_reg_to_regnum);
set_gdbarch_register_sim_regno (gdbarch, arm_register_sim_regno);
- /* Integer registers are 4 bytes. */
- set_gdbarch_deprecated_register_size (gdbarch, 4);
set_gdbarch_register_name (gdbarch, arm_register_name);
/* Returning results. */
set_gdbarch_return_value (gdbarch, arm_return_value);
- /* Single stepping. */
- /* XXX For an RDI target we should ask the target if it can single-step. */
- set_gdbarch_software_single_step (gdbarch, arm_software_single_step);
-
/* Disassembly. */
set_gdbarch_print_insn (gdbarch, gdb_print_insn_arm);
set_gdbarch_elf_make_msymbol_special (gdbarch, arm_elf_make_msymbol_special);
set_gdbarch_coff_make_msymbol_special (gdbarch,
arm_coff_make_msymbol_special);
+ set_gdbarch_record_special_symbol (gdbarch, arm_record_special_symbol);
+
+ /* Virtual tables. */
+ set_gdbarch_vbit_in_delta (gdbarch, 1);
/* Hook in the ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
+ dwarf2_frame_set_init_reg (gdbarch, arm_dwarf2_frame_init_reg);
+
/* Add some default predicates. */
- frame_unwind_append_sniffer (gdbarch, arm_stub_unwind_sniffer);
- frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
- frame_unwind_append_sniffer (gdbarch, arm_prologue_unwind_sniffer);
+ frame_unwind_append_unwinder (gdbarch, &arm_stub_unwind);
+ dwarf2_append_unwinders (gdbarch);
+ frame_unwind_append_unwinder (gdbarch, &arm_prologue_unwind);
/* Now we have tuned the configuration, set a few final things,
based on what the OS ABI has told us. */
+ /* If the ABI is not otherwise marked, assume the old GNU APCS. EABI
+ binaries are always marked. */
+ if (tdep->arm_abi == ARM_ABI_AUTO)
+ tdep->arm_abi = ARM_ABI_APCS;
+
+ /* We used to default to FPA for generic ARM, but almost nobody
+ uses that now, and we now provide a way for the user to force
+ the model. So default to the most useful variant. */
+ if (tdep->fp_model == ARM_FLOAT_AUTO)
+ tdep->fp_model = ARM_FLOAT_SOFT_FPA;
+
if (tdep->jb_pc >= 0)
set_gdbarch_get_longjmp_target (gdbarch, arm_get_longjmp_target);
/* Floating point sizes and format. */
- switch (info.byte_order)
+ set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
+ if (tdep->fp_model == ARM_FLOAT_SOFT_FPA || tdep->fp_model == ARM_FLOAT_FPA)
{
- case BFD_ENDIAN_BIG:
- set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_big);
- set_gdbarch_double_format (gdbarch, &floatformat_ieee_double_big);
- set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_big);
- break;
+ set_gdbarch_double_format
+ (gdbarch, floatformats_ieee_double_littlebyte_bigword);
+ set_gdbarch_long_double_format
+ (gdbarch, floatformats_ieee_double_littlebyte_bigword);
+ }
+ else
+ {
+ set_gdbarch_double_format (gdbarch, floatformats_ieee_double);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ieee_double);
+ }
- case BFD_ENDIAN_LITTLE:
- set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_little);
- if (fp_model == ARM_FLOAT_SOFT_FPA || fp_model == ARM_FLOAT_FPA)
- {
- set_gdbarch_double_format
- (gdbarch, &floatformat_ieee_double_littlebyte_bigword);
- set_gdbarch_long_double_format
- (gdbarch, &floatformat_ieee_double_littlebyte_bigword);
- }
- else
- {
- set_gdbarch_double_format (gdbarch, &floatformat_ieee_double_little);
- set_gdbarch_long_double_format (gdbarch,
- &floatformat_ieee_double_little);
- }
- break;
+ if (tdesc_data)
+ tdesc_use_registers (gdbarch, info.target_desc, tdesc_data);
- default:
- internal_error (__FILE__, __LINE__,
- _("arm_gdbarch_init: bad byte order for float format"));
- }
+ /* Add standard register aliases. We add aliases even for those
+ nanes which are used by the current architecture - it's simpler,
+ and does no harm, since nothing ever lists user registers. */
+ for (i = 0; i < ARRAY_SIZE (arm_register_aliases); i++)
+ user_reg_add (gdbarch, arm_register_aliases[i].name,
+ value_of_arm_user_reg, &arm_register_aliases[i].regnum);
return gdbarch;
}
static void
-arm_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)
+arm_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (tdep == NULL)
return;
gdbarch_register (bfd_arch_arm, arm_gdbarch_init, arm_dump_tdep);
+ arm_objfile_data_key
+ = register_objfile_data_with_cleanup (arm_objfile_data_cleanup);
+
/* Register an ELF OS ABI sniffer for ARM binaries. */
gdbarch_register_osabi_sniffer (bfd_arch_arm,
bfd_target_elf_flavour,
length = snprintf (rdptr, rest, "%s - %s\n", setname, setdesc);
rdptr += length;
rest -= length;
- /* Copy the default names (if found) and synchronize disassembler. */
+ /* When we find the default names, tell the disassembler to use
+ them. */
if (!strcmp (setname, "std"))
{
disassembly_style = setname;
- current_option = i;
- for (j = 0; j < numregs; j++)
- arm_register_names[j] = (char *) regnames[j];
set_arm_regname_option (i);
}
}
NULL, arm_set_abi, arm_show_abi,
&setarmcmdlist, &showarmcmdlist);
+ /* Add two commands to allow the user to force the assumed
+ execution mode. */
+ add_setshow_enum_cmd ("fallback-mode", class_support,
+ arm_mode_strings, &arm_fallback_mode_string,
+ _("Set the mode assumed when symbols are unavailable."),
+ _("Show the mode assumed when symbols are unavailable."),
+ NULL, NULL, arm_show_fallback_mode,
+ &setarmcmdlist, &showarmcmdlist);
+ add_setshow_enum_cmd ("force-mode", class_support,
+ arm_mode_strings, &arm_force_mode_string,
+ _("Set the mode assumed even when symbols are available."),
+ _("Show the mode assumed even when symbols are available."),
+ NULL, NULL, arm_show_force_mode,
+ &setarmcmdlist, &showarmcmdlist);
+
/* Debugging flag. */
add_setshow_boolean_cmd ("arm", class_maintenance, &arm_debug,
_("Set ARM debugging."),