/* Target-dependent code for Atmel AVR, for GDB.
- Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
- Free Software Foundation, Inc.
+
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+ 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* Contributed by Theodore A. Roth, troth@openavr.org */
#include "trad-frame.h"
#include "gdbcmd.h"
#include "gdbcore.h"
+#include "gdbtypes.h"
#include "inferior.h"
#include "symfile.h"
#include "arch-utils.h"
(AVR micros are pure Harvard Architecture processors.)
The AVR family of microcontrollers have three distinctly different memory
- spaces: flash, sram and eeprom. The flash is 16 bits wide and is used for
- the most part to store program instructions. The sram is 8 bits wide and is
- used for the stack and the heap. Some devices lack sram and some can have
+ spaces: flash, sram and eeprom. The flash is 16 bits wide and is used for
+ the most part to store program instructions. The sram is 8 bits wide and is
+ used for the stack and the heap. Some devices lack sram and some can have
an additional external sram added on as a peripheral.
The eeprom is 8 bits wide and is used to store data when the device is
- powered down. Eeprom is not directly accessible, it can only be accessed
- via io-registers using a special algorithm. Accessing eeprom via gdb's
+ powered down. Eeprom is not directly accessible, it can only be accessed
+ via io-registers using a special algorithm. Accessing eeprom via gdb's
remote serial protocol ('m' or 'M' packets) looks difficult to do and is
not included at this time.
work, the remote target must be able to handle eeprom accesses and perform
the address translation.]
- All three memory spaces have physical addresses beginning at 0x0. In
+ All three memory spaces have physical addresses beginning at 0x0. In
addition, the flash is addressed by gcc/binutils/gdb with respect to 8 bit
bytes instead of the 16 bit wide words used by the real device for the
Program Counter.
In order for remote targets to work correctly, extra bits must be added to
addresses before they are send to the target or received from the target
- via the remote serial protocol. The extra bits are the MSBs and are used to
- decode which memory space the address is referring to. */
+ via the remote serial protocol. The extra bits are the MSBs and are used to
+ decode which memory space the address is referring to. */
#undef XMALLOC
#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
-#undef EXTRACT_INSN
-#define EXTRACT_INSN(addr) extract_unsigned_integer(addr,2)
-
/* Constants: prefixed with AVR_ to avoid name space clashes */
enum
AVR_NUM_REGS = 32 + 1 /*SREG*/ + 1 /*SP*/ + 1 /*PC*/,
AVR_NUM_REG_BYTES = 32 + 1 /*SREG*/ + 2 /*SP*/ + 4 /*PC*/,
+ /* Pseudo registers. */
+ AVR_PSEUDO_PC_REGNUM = 35,
+ AVR_NUM_PSEUDO_REGS = 1,
+
AVR_PC_REG_INDEX = 35, /* index into array of registers */
AVR_MAX_PROLOGUE_SIZE = 64, /* bytes */
- /* Count of pushed registers. From r2 to r17 (inclusively), r28, r29 */
+ /* Count of pushed registers. From r2 to r17 (inclusively), r28, r29 */
AVR_MAX_PUSHES = 18,
- /* Number of the last pushed register. r17 for current avr-gcc */
+ /* Number of the last pushed register. r17 for current avr-gcc */
AVR_LAST_PUSHED_REGNUM = 17,
AVR_ARG1_REGNUM = 24, /* Single byte argument */
AVR_RETN_REGNUM = 25, /* Multi byte return value */
/* FIXME: TRoth/2002-01-??: Can we shift all these memory masks left 8
- bits? Do these have to match the bfd vma values?. It sure would make
+ bits? Do these have to match the bfd vma values? It sure would make
things easier in the future if they didn't need to match.
Note: I chose these values so as to be consistent with bfd vma
addresses.
TRoth/2002-04-08: There is already a conflict with very large programs
- in the mega128. The mega128 has 128K instruction bytes (64K words),
+ in the mega128. The mega128 has 128K instruction bytes (64K words),
thus the Most Significant Bit is 0x10000 which gets masked off my
AVR_MEM_MASK.
thus requires a 17-bit address.
For now, I've just removed the EEPROM mask and changed AVR_MEM_MASK
- from 0x00ff0000 to 0x00f00000. Eeprom is not accessible from gdb yet,
+ from 0x00ff0000 to 0x00f00000. Eeprom is not accessible from gdb yet,
but could be for some remote targets by just adding the correct offset
to the address and letting the remote target handle the low-level
- details of actually accessing the eeprom. */
+ details of actually accessing the eeprom. */
AVR_IMEM_START = 0x00000000, /* INSN memory */
AVR_SMEM_START = 0x00800000, /* SRAM memory */
struct gdbarch_tdep
{
- /* FIXME: TRoth: is there anything to put here? */
- int foo;
+ /* Number of bytes stored to the stack by call instructions.
+ 2 bytes for avr1-5, 3 bytes for avr6. */
+ int call_length;
+
+ /* Type for void. */
+ struct type *void_type;
+ /* Type for a function returning void. */
+ struct type *func_void_type;
+ /* Type for a pointer to a function. Used for the type of PC. */
+ struct type *pc_type;
};
-/* Lookup the name of a register given it's number. */
+/* Lookup the name of a register given it's number. */
static const char *
-avr_register_name (int regnum)
+avr_register_name (struct gdbarch *gdbarch, int regnum)
{
- static char *register_names[] = {
+ static const char * const register_names[] = {
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
- "SREG", "SP", "PC"
+ "SREG", "SP", "PC2",
+ "pc"
};
if (regnum < 0)
return NULL;
avr_register_type (struct gdbarch *gdbarch, int reg_nr)
{
if (reg_nr == AVR_PC_REGNUM)
- return builtin_type_uint32;
+ return builtin_type (gdbarch)->builtin_uint32;
+ if (reg_nr == AVR_PSEUDO_PC_REGNUM)
+ return gdbarch_tdep (gdbarch)->pc_type;
if (reg_nr == AVR_SP_REGNUM)
- return builtin_type_void_data_ptr;
- else
- return builtin_type_uint8;
+ return builtin_type (gdbarch)->builtin_data_ptr;
+ return builtin_type (gdbarch)->builtin_uint8;
}
-/* Instruction address checks and convertions. */
+/* Instruction address checks and convertions. */
static CORE_ADDR
avr_make_iaddr (CORE_ADDR x)
return ((x) | AVR_IMEM_START);
}
-/* FIXME: TRoth: Really need to use a larger mask for instructions. Some
+/* FIXME: TRoth: Really need to use a larger mask for instructions. Some
devices are already up to 128KBytes of flash space.
- TRoth/2002-04-8: See comment above where AVR_IMEM_START is defined. */
+ TRoth/2002-04-8: See comment above where AVR_IMEM_START is defined. */
static CORE_ADDR
avr_convert_iaddr_to_raw (CORE_ADDR x)
return ((x) & 0xffffffff);
}
-/* SRAM address checks and convertions. */
+/* SRAM address checks and convertions. */
static CORE_ADDR
avr_make_saddr (CORE_ADDR x)
{
+ /* Return 0 for NULL. */
+ if (x == 0)
+ return 0;
+
return ((x) | AVR_SMEM_START);
}
return ((x) & 0xffffffff);
}
-/* EEPROM address checks and convertions. I don't know if these will ever
- actually be used, but I've added them just the same. TRoth */
+/* EEPROM address checks and convertions. I don't know if these will ever
+ actually be used, but I've added them just the same. TRoth */
/* TRoth/2002-04-08: Commented out for now to allow fix for problem with large
- programs in the mega128. */
+ programs in the mega128. */
/* static CORE_ADDR */
/* avr_make_eaddr (CORE_ADDR x) */
/* return ((x) & 0xffffffff); */
/* } */
-/* Convert from address to pointer and vice-versa. */
+/* Convert from address to pointer and vice-versa. */
static void
-avr_address_to_pointer (struct type *type, void *buf, CORE_ADDR addr)
+avr_address_to_pointer (struct gdbarch *gdbarch,
+ struct type *type, gdb_byte *buf, CORE_ADDR addr)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
/* Is it a code address? */
if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC
|| TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_METHOD)
{
- store_unsigned_integer (buf, TYPE_LENGTH (type),
+ store_unsigned_integer (buf, TYPE_LENGTH (type), byte_order,
avr_convert_iaddr_to_raw (addr >> 1));
}
else
{
/* Strip off any upper segment bits. */
- store_unsigned_integer (buf, TYPE_LENGTH (type),
+ store_unsigned_integer (buf, TYPE_LENGTH (type), byte_order,
avr_convert_saddr_to_raw (addr));
}
}
static CORE_ADDR
-avr_pointer_to_address (struct type *type, const void *buf)
+avr_pointer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
{
- CORE_ADDR addr = extract_unsigned_integer (buf, TYPE_LENGTH (type));
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR addr
+ = extract_unsigned_integer (buf, TYPE_LENGTH (type), byte_order);
/* Is it a code address? */
if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC
}
static CORE_ADDR
-avr_read_pc (ptid_t ptid)
+avr_integer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
+{
+ ULONGEST addr = unpack_long (type, buf);
+
+ return avr_make_saddr (addr);
+}
+
+static CORE_ADDR
+avr_read_pc (struct regcache *regcache)
{
- ptid_t save_ptid;
ULONGEST pc;
- CORE_ADDR retval;
-
- save_ptid = inferior_ptid;
- inferior_ptid = ptid;
- regcache_cooked_read_unsigned (current_regcache, AVR_PC_REGNUM, &pc);
- inferior_ptid = save_ptid;
- retval = avr_make_iaddr (pc);
- return retval;
+ regcache_cooked_read_unsigned (regcache, AVR_PC_REGNUM, &pc);
+ return avr_make_iaddr (pc);
}
static void
-avr_write_pc (CORE_ADDR val, ptid_t ptid)
+avr_write_pc (struct regcache *regcache, CORE_ADDR val)
{
- ptid_t save_ptid;
-
- save_ptid = inferior_ptid;
- inferior_ptid = ptid;
- write_register (AVR_PC_REGNUM, avr_convert_iaddr_to_raw (val));
- inferior_ptid = save_ptid;
+ regcache_cooked_write_unsigned (regcache, AVR_PC_REGNUM,
+ avr_convert_iaddr_to_raw (val));
}
-static CORE_ADDR
-avr_read_sp (void)
+static enum register_status
+avr_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
+ int regnum, gdb_byte *buf)
{
- ULONGEST sp;
+ ULONGEST val;
+ enum register_status status;
- regcache_cooked_read_unsigned (current_regcache, AVR_SP_REGNUM, &sp);
- return (avr_make_saddr (sp));
+ switch (regnum)
+ {
+ case AVR_PSEUDO_PC_REGNUM:
+ status = regcache_raw_read_unsigned (regcache, AVR_PC_REGNUM, &val);
+ if (status != REG_VALID)
+ return status;
+ val >>= 1;
+ store_unsigned_integer (buf, 4, gdbarch_byte_order (gdbarch), val);
+ return status;
+ default:
+ internal_error (__FILE__, __LINE__, _("invalid regnum"));
+ }
}
-static int
-avr_scan_arg_moves (int vpc, unsigned char *prologue)
+static void
+avr_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
+ int regnum, const gdb_byte *buf)
{
- unsigned short insn;
+ ULONGEST val;
- for (; vpc < AVR_MAX_PROLOGUE_SIZE; vpc += 2)
+ switch (regnum)
{
- insn = EXTRACT_INSN (&prologue[vpc]);
- if ((insn & 0xff00) == 0x0100) /* movw rXX, rYY */
- continue;
- else if ((insn & 0xfc00) == 0x2c00) /* mov rXX, rYY */
- continue;
- else
- break;
+ case AVR_PSEUDO_PC_REGNUM:
+ val = extract_unsigned_integer (buf, 4, gdbarch_byte_order (gdbarch));
+ val <<= 1;
+ regcache_raw_write_unsigned (regcache, AVR_PC_REGNUM, val);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("invalid regnum"));
}
-
- return vpc;
}
/* Function: avr_scan_prologue
/* Not really part of a prologue, but still need to scan for it, is when a
function prologue moves values passed via registers as arguments to new
- registers. In this case, all local variables live in registers, so there
- may be some register saves. This is what it looks like:
+ registers. In this case, all local variables live in registers, so there
+ may be some register saves. This is what it looks like:
movw rMM, rNN
...
- There could be multiple movw's. If the target doesn't have a movw insn, it
- will use two mov insns. This could be done after any of the above prologue
+ There could be multiple movw's. If the target doesn't have a movw insn, it
+ will use two mov insns. This could be done after any of the above prologue
types. */
static CORE_ADDR
-avr_scan_prologue (CORE_ADDR pc, struct avr_unwind_cache *info)
+avr_scan_prologue (struct gdbarch *gdbarch, CORE_ADDR pc_beg, CORE_ADDR pc_end,
+ struct avr_unwind_cache *info)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
int i;
unsigned short insn;
int scan_stage = 0;
struct minimal_symbol *msymbol;
unsigned char prologue[AVR_MAX_PROLOGUE_SIZE];
int vpc = 0;
+ int len;
+
+ len = pc_end - pc_beg;
+ if (len > AVR_MAX_PROLOGUE_SIZE)
+ len = AVR_MAX_PROLOGUE_SIZE;
/* FIXME: TRoth/2003-06-11: This could be made more efficient by only
- reading in the bytes of the prologue. The problem is that the figuring
- out where the end of the prologue is is a bit difficult. The old code
+ reading in the bytes of the prologue. The problem is that the figuring
+ out where the end of the prologue is is a bit difficult. The old code
tried to do that, but failed quite often. */
- read_memory (pc, prologue, AVR_MAX_PROLOGUE_SIZE);
+ read_memory (pc_beg, prologue, len);
/* Scanning main()'s prologue
ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>)
out __SP_H__,r29
out __SP_L__,r28 */
- if (1)
+ if (len >= 4)
{
CORE_ADDR locals;
- unsigned char img[] = {
+ static const unsigned char img[] = {
0xde, 0xbf, /* out __SP_H__,r29 */
0xcd, 0xbf /* out __SP_L__,r28 */
};
- insn = EXTRACT_INSN (&prologue[vpc]);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
/* ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>) */
if ((insn & 0xf0f0) == 0xe0c0)
{
locals = (insn & 0xf) | ((insn & 0x0f00) >> 4);
- insn = EXTRACT_INSN (&prologue[vpc + 2]);
+ insn = extract_unsigned_integer (&prologue[vpc + 2], 2, byte_order);
/* ldi r29,hi8(<RAM_ADDR> - <LOCALS_SIZE>) */
if ((insn & 0xf0f0) == 0xe0d0)
{
locals |= ((insn & 0xf) | ((insn & 0x0f00) >> 4)) << 8;
- if (memcmp (prologue + vpc + 4, img, sizeof (img)) == 0)
+ if (vpc + 4 + sizeof (img) < len
+ && memcmp (prologue + vpc + 4, img, sizeof (img)) == 0)
{
info->prologue_type = AVR_PROLOGUE_MAIN;
info->base = locals;
- return pc + 4;
+ return pc_beg + 4;
}
}
}
unsigned num_pushes;
int pc_offset = 0;
- insn = EXTRACT_INSN (&prologue[vpc]);
+ /* At least the fifth instruction must have been executed to
+ modify frame shape. */
+ if (len < 10)
+ break;
+
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
/* ldi r26,<LOCALS_SIZE> */
if ((insn & 0xf0f0) != 0xe0a0)
break;
loc_size = (insn & 0xf) | ((insn & 0x0f00) >> 4);
pc_offset += 2;
- insn = EXTRACT_INSN (&prologue[vpc + 2]);
+ insn = extract_unsigned_integer (&prologue[vpc + 2], 2, byte_order);
/* ldi r27,<LOCALS_SIZE> / 256 */
if ((insn & 0xf0f0) != 0xe0b0)
break;
loc_size |= ((insn & 0xf) | ((insn & 0x0f00) >> 4)) << 8;
pc_offset += 2;
- insn = EXTRACT_INSN (&prologue[vpc + 4]);
+ insn = extract_unsigned_integer (&prologue[vpc + 4], 2, byte_order);
/* ldi r30,pm_lo8(.L_foo_body) */
if ((insn & 0xf0f0) != 0xe0e0)
break;
body_addr = (insn & 0xf) | ((insn & 0x0f00) >> 4);
pc_offset += 2;
- insn = EXTRACT_INSN (&prologue[vpc + 6]);
+ insn = extract_unsigned_integer (&prologue[vpc + 6], 2, byte_order);
/* ldi r31,pm_hi8(.L_foo_body) */
if ((insn & 0xf0f0) != 0xe0f0)
break;
if (!msymbol)
break;
- insn = EXTRACT_INSN (&prologue[vpc + 8]);
+ insn = extract_unsigned_integer (&prologue[vpc + 8], 2, byte_order);
/* rjmp __prologue_saves__+RRR */
if ((insn & 0xf000) == 0xc000)
{
/* Convert offset to byte addressable mode */
i *= 2;
/* Destination address */
- i += pc + 10;
+ i += pc_beg + 10;
- if (body_addr != (pc + 10)/2)
+ if (body_addr != (pc_beg + 10)/2)
break;
pc_offset += 2;
{
/* Extract absolute PC address from JMP */
i = (((insn & 0x1) | ((insn & 0x1f0) >> 3) << 16)
- | (EXTRACT_INSN (&prologue[vpc + 10]) & 0xffff));
+ | (extract_unsigned_integer (&prologue[vpc + 10], 2, byte_order)
+ & 0xffff));
/* Convert address to byte addressable mode */
i *= 2;
- if (body_addr != (pc + 12)/2)
+ if (body_addr != (pc_beg + 12)/2)
break;
pc_offset += 4;
if (num_pushes > AVR_MAX_PUSHES)
{
- fprintf_unfiltered (gdb_stderr, "Num pushes too large: %d\n",
+ fprintf_unfiltered (gdb_stderr, _("Num pushes too large: %d\n"),
num_pushes);
num_pushes = 0;
}
info->size = loc_size + num_pushes;
info->prologue_type = AVR_PROLOGUE_CALL;
- return pc + pc_offset;
+ return pc_beg + pc_offset;
}
/* Scan for the beginning of the prologue for an interrupt or signal
if (1)
{
- unsigned char img[] = {
+ static const unsigned char img[] = {
0x78, 0x94, /* sei */
0x1f, 0x92, /* push r1 */
0x0f, 0x92, /* push r0 */
0x0f, 0x92, /* push r0 */
0x11, 0x24 /* clr r1 */
};
- if (memcmp (prologue, img, sizeof (img)) == 0)
+ if (len >= sizeof (img)
+ && memcmp (prologue, img, sizeof (img)) == 0)
{
info->prologue_type = AVR_PROLOGUE_INTR;
vpc += sizeof (img);
info->saved_regs[1].addr = 1;
info->size += 3;
}
- else if (memcmp (img + 2, prologue, sizeof (img) - 2) == 0)
+ else if (len >= sizeof (img) - 2
+ && memcmp (img + 2, prologue, sizeof (img) - 2) == 0)
{
info->prologue_type = AVR_PROLOGUE_SIG;
vpc += sizeof (img) - 2;
info->saved_regs[AVR_SREG_REGNUM].addr = 3;
info->saved_regs[0].addr = 2;
info->saved_regs[1].addr = 1;
- info->size += 3;
+ info->size += 2;
}
}
/* First stage of the prologue scanning.
Scan pushes (saved registers) */
- for (; vpc < AVR_MAX_PROLOGUE_SIZE; vpc += 2)
+ for (; vpc < len; vpc += 2)
{
- insn = EXTRACT_INSN (&prologue[vpc]);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
if ((insn & 0xfe0f) == 0x920f) /* push rXX */
{
- /* Bits 4-9 contain a mask for registers R0-R32. */
+ /* Bits 4-9 contain a mask for registers R0-R32. */
int regno = (insn & 0x1f0) >> 4;
info->size++;
info->saved_regs[regno].addr = info->size;
break;
}
- if (vpc >= AVR_MAX_PROLOGUE_SIZE)
- fprintf_unfiltered (gdb_stderr,
- "Hit end of prologue while scanning pushes\n");
+ gdb_assert (vpc < AVR_MAX_PROLOGUE_SIZE);
+
+ /* Handle static small stack allocation using rcall or push. */
+
+ while (scan_stage == 1 && vpc < len)
+ {
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
+ if (insn == 0xd000) /* rcall .+0 */
+ {
+ info->size += gdbarch_tdep (gdbarch)->call_length;
+ vpc += 2;
+ }
+ else if (insn == 0x920f) /* push r0 */
+ {
+ info->size += 1;
+ vpc += 2;
+ }
+ else
+ break;
+ }
/* Second stage of the prologue scanning.
Scan:
in r28,__SP_L__
in r29,__SP_H__ */
- if (scan_stage == 1 && vpc < AVR_MAX_PROLOGUE_SIZE)
+ if (scan_stage == 1 && vpc < len)
{
- unsigned char img[] = {
+ static const unsigned char img[] = {
0xcd, 0xb7, /* in r28,__SP_L__ */
0xde, 0xb7 /* in r29,__SP_H__ */
};
unsigned short insn1;
- if (memcmp (prologue + vpc, img, sizeof (img)) == 0)
+ if (vpc + sizeof (img) < len
+ && memcmp (prologue + vpc, img, sizeof (img)) == 0)
{
vpc += 4;
scan_stage = 2;
}
}
- /* Third stage of the prologue scanning. (Really two stages)
+ /* Third stage of the prologue scanning. (Really two stages).
Scan for:
sbiw r28,XX or subi r28,lo8(XX)
sbci r29,hi8(XX)
out __SREG__,__tmp_reg__
out __SP_L__,r28 */
- if (scan_stage == 2 && vpc < AVR_MAX_PROLOGUE_SIZE)
+ if (scan_stage == 2 && vpc < len)
{
int locals_size = 0;
- unsigned char img[] = {
+ static const unsigned char img[] = {
0x0f, 0xb6, /* in r0,0x3f */
0xf8, 0x94, /* cli */
0xde, 0xbf, /* out 0x3e,r29 ; SPH */
0x0f, 0xbe, /* out 0x3f,r0 ; SREG */
0xcd, 0xbf /* out 0x3d,r28 ; SPL */
};
- unsigned char img_sig[] = {
+ static const unsigned char img_sig[] = {
0xde, 0xbf, /* out 0x3e,r29 ; SPH */
0xcd, 0xbf /* out 0x3d,r28 ; SPL */
};
- unsigned char img_int[] = {
+ static const unsigned char img_int[] = {
0xf8, 0x94, /* cli */
0xde, 0xbf, /* out 0x3e,r29 ; SPH */
0x78, 0x94, /* sei */
0xcd, 0xbf /* out 0x3d,r28 ; SPL */
};
- insn = EXTRACT_INSN (&prologue[vpc]);
- vpc += 2;
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
if ((insn & 0xff30) == 0x9720) /* sbiw r28,XXX */
- locals_size = (insn & 0xf) | ((insn & 0xc0) >> 2);
+ {
+ locals_size = (insn & 0xf) | ((insn & 0xc0) >> 2);
+ vpc += 2;
+ }
else if ((insn & 0xf0f0) == 0x50c0) /* subi r28,lo8(XX) */
{
locals_size = (insn & 0xf) | ((insn & 0xf00) >> 4);
- insn = EXTRACT_INSN (&prologue[vpc]);
vpc += 2;
- locals_size += ((insn & 0xf) | ((insn & 0xf00) >> 4) << 8);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
+ vpc += 2;
+ locals_size += ((insn & 0xf) | ((insn & 0xf00) >> 4)) << 8;
}
else
- return pc + vpc;
+ return pc_beg + vpc;
- /* Scan the last part of the prologue. May not be present for interrupt
+ /* Scan the last part of the prologue. May not be present for interrupt
or signal handler functions, which is why we set the prologue type
when we saw the beginning of the prologue previously. */
- if (memcmp (prologue + vpc, img_sig, sizeof (img_sig)) == 0)
+ if (vpc + sizeof (img_sig) < len
+ && memcmp (prologue + vpc, img_sig, sizeof (img_sig)) == 0)
{
vpc += sizeof (img_sig);
}
- else if (memcmp (prologue + vpc, img_int, sizeof (img_int)) == 0)
+ else if (vpc + sizeof (img_int) < len
+ && memcmp (prologue + vpc, img_int, sizeof (img_int)) == 0)
{
vpc += sizeof (img_int);
}
- if (memcmp (prologue + vpc, img, sizeof (img)) == 0)
+ if (vpc + sizeof (img) < len
+ && memcmp (prologue + vpc, img, sizeof (img)) == 0)
{
info->prologue_type = AVR_PROLOGUE_NORMAL;
vpc += sizeof (img);
info->size += locals_size;
- return pc + avr_scan_arg_moves (vpc, prologue);
+ /* Fall through. */
}
/* If we got this far, we could not scan the prologue, so just return the pc
of the frame plus an adjustment for argument move insns. */
- return pc + avr_scan_arg_moves (vpc, prologue);;
+ for (; vpc < len; vpc += 2)
+ {
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
+ if ((insn & 0xff00) == 0x0100) /* movw rXX, rYY */
+ continue;
+ else if ((insn & 0xfc00) == 0x2c00) /* mov rXX, rYY */
+ continue;
+ else
+ break;
+ }
+
+ return pc_beg + vpc;
}
static CORE_ADDR
-avr_skip_prologue (CORE_ADDR pc)
+avr_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
CORE_ADDR func_addr, func_end;
- CORE_ADDR prologue_end = pc;
+ CORE_ADDR post_prologue_pc;
/* See what the symbol table says */
- if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
- {
- struct symtab_and_line sal;
- struct avr_unwind_cache info = {0};
- struct trad_frame_saved_reg saved_regs[AVR_NUM_REGS];
-
- info.saved_regs = saved_regs;
-
- /* Need to run the prologue scanner to figure out if the function has a
- prologue and possibly skip over moving arguments passed via registers
- to other registers. */
+ if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ return pc;
- prologue_end = avr_scan_prologue (pc, &info);
+ post_prologue_pc = skip_prologue_using_sal (gdbarch, func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
- if (info.prologue_type == AVR_PROLOGUE_NONE)
- return pc;
- else
- {
- sal = find_pc_line (func_addr, 0);
+ {
+ CORE_ADDR prologue_end = pc;
+ struct avr_unwind_cache info = {0};
+ struct trad_frame_saved_reg saved_regs[AVR_NUM_REGS];
- if (sal.line != 0 && sal.end < func_end)
- return sal.end;
- }
- }
+ info.saved_regs = saved_regs;
+
+ /* Need to run the prologue scanner to figure out if the function has a
+ prologue and possibly skip over moving arguments passed via registers
+ to other registers. */
+
+ prologue_end = avr_scan_prologue (gdbarch, func_addr, func_end, &info);
+
+ if (info.prologue_type != AVR_PROLOGUE_NONE)
+ return prologue_end;
+ }
-/* Either we didn't find the start of this function (nothing we can do),
- or there's no line info, or the line after the prologue is after
- the end of the function (there probably isn't a prologue). */
+ /* Either we didn't find the start of this function (nothing we can do),
+ or there's no line info, or the line after the prologue is after
+ the end of the function (there probably isn't a prologue). */
- return prologue_end;
+ return pc;
}
-/* Not all avr devices support the BREAK insn. Those that don't should treat
- it as a NOP. Thus, it should be ok. Since the avr is currently a remote
- only target, this shouldn't be a problem (I hope). TRoth/2003-05-14 */
+/* Not all avr devices support the BREAK insn. Those that don't should treat
+ it as a NOP. Thus, it should be ok. Since the avr is currently a remote
+ only target, this shouldn't be a problem (I hope). TRoth/2003-05-14 */
static const unsigned char *
-avr_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
+avr_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR *pcptr, int *lenptr)
{
- static unsigned char avr_break_insn [] = { 0x98, 0x95 };
+ static const unsigned char avr_break_insn [] = { 0x98, 0x95 };
*lenptr = sizeof (avr_break_insn);
return avr_break_insn;
}
-/* Given a return value in `regbuf' with a type `valtype',
- extract and copy its value into `valbuf'.
-
- Return values are always passed via registers r25:r24:... */
+/* Determine, for architecture GDBARCH, how a return value of TYPE
+ should be returned. If it is supposed to be returned in registers,
+ and READBUF is non-zero, read the appropriate value from REGCACHE,
+ and copy it into READBUF. If WRITEBUF is non-zero, write the value
+ from WRITEBUF into REGCACHE. */
-static void
-avr_extract_return_value (struct type *type, struct regcache *regcache,
- void *valbuf)
+static enum return_value_convention
+avr_return_value (struct gdbarch *gdbarch, struct type *func_type,
+ struct type *valtype, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
- ULONGEST r24, r25;
- ULONGEST c;
- int len;
- if (TYPE_LENGTH (type) == 1)
- {
- regcache_cooked_read_unsigned (regcache, 24, &c);
- store_unsigned_integer (valbuf, 1, c);
- }
+ int i;
+ /* Single byte are returned in r24.
+ Otherwise, the MSB of the return value is always in r25, calculate which
+ register holds the LSB. */
+ int lsb_reg;
+
+ if ((TYPE_CODE (valtype) == TYPE_CODE_STRUCT
+ || TYPE_CODE (valtype) == TYPE_CODE_UNION
+ || TYPE_CODE (valtype) == TYPE_CODE_ARRAY)
+ && TYPE_LENGTH (valtype) > 8)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+
+ if (TYPE_LENGTH (valtype) <= 2)
+ lsb_reg = 24;
+ else if (TYPE_LENGTH (valtype) <= 4)
+ lsb_reg = 22;
+ else if (TYPE_LENGTH (valtype) <= 8)
+ lsb_reg = 18;
else
+ gdb_assert_not_reached ("unexpected type length");
+
+ if (writebuf != NULL)
{
- int i;
- /* The MSB of the return value is always in r25, calculate which
- register holds the LSB. */
- int lsb_reg = 25 - TYPE_LENGTH (type) + 1;
+ for (i = 0; i < TYPE_LENGTH (valtype); i++)
+ regcache_cooked_write (regcache, lsb_reg + i, writebuf + i);
+ }
- for (i=0; i< TYPE_LENGTH (type); i++)
- {
- regcache_cooked_read (regcache, lsb_reg + i,
- (bfd_byte *) valbuf + i);
- }
+ if (readbuf != NULL)
+ {
+ for (i = 0; i < TYPE_LENGTH (valtype); i++)
+ regcache_cooked_read (regcache, lsb_reg + i, readbuf + i);
}
+
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
+
/* Put here the code to store, into fi->saved_regs, the addresses of
the saved registers of frame described by FRAME_INFO. This
includes special registers such as pc and fp saved in special ways
in the stack frame. sp is even more special: the address we return
- for it IS the sp for the next frame. */
+ for it IS the sp for the next frame. */
-struct avr_unwind_cache *
-avr_frame_unwind_cache (struct frame_info *next_frame,
+static struct avr_unwind_cache *
+avr_frame_unwind_cache (struct frame_info *this_frame,
void **this_prologue_cache)
{
- CORE_ADDR pc;
+ CORE_ADDR start_pc, current_pc;
ULONGEST prev_sp;
ULONGEST this_base;
struct avr_unwind_cache *info;
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
int i;
- if ((*this_prologue_cache))
- return (*this_prologue_cache);
+ if (*this_prologue_cache)
+ return *this_prologue_cache;
info = FRAME_OBSTACK_ZALLOC (struct avr_unwind_cache);
- (*this_prologue_cache) = info;
- info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+ *this_prologue_cache = info;
+ info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
info->size = 0;
info->prologue_type = AVR_PROLOGUE_NONE;
- pc = frame_func_unwind (next_frame);
-
- if ((pc > 0) && (pc < frame_pc_unwind (next_frame)))
- avr_scan_prologue (pc, info);
+ start_pc = get_frame_func (this_frame);
+ current_pc = get_frame_pc (this_frame);
+ if ((start_pc > 0) && (start_pc <= current_pc))
+ avr_scan_prologue (get_frame_arch (this_frame),
+ start_pc, current_pc, info);
if ((info->prologue_type != AVR_PROLOGUE_NONE)
&& (info->prologue_type != AVR_PROLOGUE_MAIN))
/* The SP was moved to the FP. This indicates that a new frame
was created. Get THIS frame's FP value by unwinding it from
the next frame. */
- frame_unwind_unsigned_register (next_frame, AVR_FP_REGNUM, &this_base);
- frame_unwind_unsigned_register (next_frame, AVR_FP_REGNUM+1, &high_base);
+ this_base = get_frame_register_unsigned (this_frame, AVR_FP_REGNUM);
+ high_base = get_frame_register_unsigned (this_frame, AVR_FP_REGNUM + 1);
this_base += (high_base << 8);
/* The FP points at the last saved register. Adjust the FP back
{
/* Assume that the FP is this frame's SP but with that pushed
stack space added back. */
- frame_unwind_unsigned_register (next_frame, AVR_SP_REGNUM, &this_base);
+ this_base = get_frame_register_unsigned (this_frame, AVR_SP_REGNUM);
prev_sp = this_base + info->size;
}
/* Add 1 here to adjust for the post-decrement nature of the push
instruction.*/
- info->prev_sp = avr_make_saddr (prev_sp+1);
-
+ info->prev_sp = avr_make_saddr (prev_sp + 1);
info->base = avr_make_saddr (this_base);
+ gdbarch = get_frame_arch (this_frame);
+
/* Adjust all the saved registers so that they contain addresses and not
offsets. */
- for (i = 0; i < NUM_REGS - 1; i++)
- if (info->saved_regs[i].addr)
- {
- info->saved_regs[i].addr = (info->prev_sp - info->saved_regs[i].addr);
- }
+ for (i = 0; i < gdbarch_num_regs (gdbarch) - 1; i++)
+ if (info->saved_regs[i].addr > 0)
+ info->saved_regs[i].addr = info->prev_sp - info->saved_regs[i].addr;
/* Except for the main and startup code, the return PC is always saved on
- the stack and is at the base of the frame. */
+ the stack and is at the base of the frame. */
if (info->prologue_type != AVR_PROLOGUE_MAIN)
- {
- info->saved_regs[AVR_PC_REGNUM].addr = info->prev_sp;
- }
+ info->saved_regs[AVR_PC_REGNUM].addr = info->prev_sp;
/* The previous frame's SP needed to be computed. Save the computed
value. */
- trad_frame_set_value (info->saved_regs, AVR_SP_REGNUM, info->prev_sp+1);
+ tdep = gdbarch_tdep (gdbarch);
+ trad_frame_set_value (info->saved_regs, AVR_SP_REGNUM,
+ info->prev_sp - 1 + tdep->call_length);
return info;
}
{
ULONGEST pc;
- frame_unwind_unsigned_register (next_frame, AVR_PC_REGNUM, &pc);
+ pc = frame_unwind_register_unsigned (next_frame, AVR_PC_REGNUM);
return avr_make_iaddr (pc);
}
+static CORE_ADDR
+avr_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST sp;
+
+ sp = frame_unwind_register_unsigned (next_frame, AVR_SP_REGNUM);
+
+ return avr_make_saddr (sp);
+}
+
/* Given a GDB frame, determine the address of the calling function's
frame. This will be used to create a new GDB frame struct. */
static void
-avr_frame_this_id (struct frame_info *next_frame,
+avr_frame_this_id (struct frame_info *this_frame,
void **this_prologue_cache,
struct frame_id *this_id)
{
struct avr_unwind_cache *info
- = avr_frame_unwind_cache (next_frame, this_prologue_cache);
+ = avr_frame_unwind_cache (this_frame, this_prologue_cache);
CORE_ADDR base;
CORE_ADDR func;
struct frame_id id;
/* The FUNC is easy. */
- func = frame_func_unwind (next_frame);
+ func = get_frame_func (this_frame);
/* Hopefully the prologue analysis either correctly determined the
frame's base (which is the SP from the previous frame), or set
(*this_id) = id;
}
-static void
-avr_frame_prev_register (struct frame_info *next_frame,
- void **this_prologue_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *bufferp)
+static struct value *
+avr_frame_prev_register (struct frame_info *this_frame,
+ void **this_prologue_cache, int regnum)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
struct avr_unwind_cache *info
- = avr_frame_unwind_cache (next_frame, this_prologue_cache);
+ = avr_frame_unwind_cache (this_frame, this_prologue_cache);
- if (regnum == AVR_PC_REGNUM)
+ if (regnum == AVR_PC_REGNUM || regnum == AVR_PSEUDO_PC_REGNUM)
{
- if (trad_frame_addr_p (info->saved_regs, regnum))
+ if (trad_frame_addr_p (info->saved_regs, AVR_PC_REGNUM))
{
- *optimizedp = 0;
- *lvalp = lval_memory;
- *addrp = info->saved_regs[regnum].addr;
- *realnump = -1;
- if (bufferp != NULL)
- {
- /* Reading the return PC from the PC register is slightly
- abnormal. register_size(AVR_PC_REGNUM) says it is 4 bytes,
- but in reality, only two bytes (3 in upcoming mega256) are
- stored on the stack.
-
- Also, note that the value on the stack is an addr to a word
- not a byte, so we will need to multiply it by two at some
- point.
-
- And to confuse matters even more, the return address stored
- on the stack is in big endian byte order, even though most
- everything else about the avr is little endian. Ick! */
-
- /* FIXME: number of bytes read here will need updated for the
- mega256 when it is available. */
-
- ULONGEST pc;
- unsigned char tmp;
- unsigned char buf[2];
-
- read_memory (info->saved_regs[regnum].addr, buf, 2);
-
- /* Convert the PC read from memory as a big-endian to
- little-endian order. */
- tmp = buf[0];
- buf[0] = buf[1];
- buf[1] = tmp;
-
- pc = (extract_unsigned_integer (buf, 2) * 2);
- store_unsigned_integer (bufferp,
- register_size (current_gdbarch, regnum),
- pc);
- }
+ /* Reading the return PC from the PC register is slightly
+ abnormal. register_size(AVR_PC_REGNUM) says it is 4 bytes,
+ but in reality, only two bytes (3 in upcoming mega256) are
+ stored on the stack.
+
+ Also, note that the value on the stack is an addr to a word
+ not a byte, so we will need to multiply it by two at some
+ point.
+
+ And to confuse matters even more, the return address stored
+ on the stack is in big endian byte order, even though most
+ everything else about the avr is little endian. Ick! */
+ ULONGEST pc;
+ int i;
+ unsigned char buf[3];
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ read_memory (info->saved_regs[AVR_PC_REGNUM].addr,
+ buf, tdep->call_length);
+
+ /* Extract the PC read from memory as a big-endian. */
+ pc = 0;
+ for (i = 0; i < tdep->call_length; i++)
+ pc = (pc << 8) | buf[i];
+
+ if (regnum == AVR_PC_REGNUM)
+ pc <<= 1;
+
+ return frame_unwind_got_constant (this_frame, regnum, pc);
}
+
+ return frame_unwind_got_optimized (this_frame, regnum);
}
- else
- trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, bufferp);
+
+ return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
}
static const struct frame_unwind avr_frame_unwind = {
NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
avr_frame_this_id,
- avr_frame_prev_register
+ avr_frame_prev_register,
+ NULL,
+ default_frame_sniffer
};
-const struct frame_unwind *
-avr_frame_sniffer (struct frame_info *next_frame)
-{
- return &avr_frame_unwind;
-}
-
static CORE_ADDR
-avr_frame_base_address (struct frame_info *next_frame, void **this_cache)
+avr_frame_base_address (struct frame_info *this_frame, void **this_cache)
{
struct avr_unwind_cache *info
- = avr_frame_unwind_cache (next_frame, this_cache);
+ = avr_frame_unwind_cache (this_frame, this_cache);
return info->base;
}
avr_frame_base_address
};
-/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
- dummy frame. The frame ID's base needs to match the TOS value
- saved by save_dummy_frame_tos(), and the PC match the dummy frame's
- breakpoint. */
+/* Assuming THIS_FRAME is a dummy, return the frame ID of that dummy
+ frame. The frame ID's base needs to match the TOS value saved by
+ save_dummy_frame_tos(), and the PC match the dummy frame's breakpoint. */
static struct frame_id
-avr_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+avr_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
ULONGEST base;
- frame_unwind_unsigned_register (next_frame, AVR_SP_REGNUM, &base);
- return frame_id_build (avr_make_saddr (base), frame_pc_unwind (next_frame));
+ base = get_frame_register_unsigned (this_frame, AVR_SP_REGNUM);
+ return frame_id_build (avr_make_saddr (base), get_frame_pc (this_frame));
}
/* When arguments must be pushed onto the stack, they go on in reverse
- order. The below implements a FILO (stack) to do this. */
+ order. The below implements a FILO (stack) to do this. */
struct stack_item
{
void *data;
};
-static struct stack_item *push_stack_item (struct stack_item *prev,
- void *contents, int len);
static struct stack_item *
-push_stack_item (struct stack_item *prev, void *contents, int len)
+push_stack_item (struct stack_item *prev, const bfd_byte *contents, int len)
{
struct stack_item *si;
si = xmalloc (sizeof (struct stack_item));
(depending on size) may go into these registers. The rest go on the stack.
All arguments are aligned to start in even-numbered registers (odd-sized
- arguments, including char, have one free register above them). For example,
+ arguments, including char, have one free register above them). For example,
an int in arg1 and a char in arg2 would be passed as such:
arg1 -> r25:r24
Arguments that are larger than 2 bytes will be split between two or more
registers as available, but will NOT be split between a register and the
- stack. Arguments that go onto the stack are pushed last arg first (this is
+ stack. Arguments that go onto the stack are pushed last arg first (this is
similar to the d10v). */
/* NOTE: TRoth/2003-06-17: The rest of this comment is old looks to be
must allocate space into which the callee will copy the return value. In
this case, a pointer to the return value location is passed into the callee
in register R0, which displaces one of the other arguments passed in via
- registers R0 to R2. */
+ registers R0 to R2. */
static CORE_ADDR
avr_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
int nargs, struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
int i;
- unsigned char buf[2];
+ unsigned char buf[3];
+ int call_length = gdbarch_tdep (gdbarch)->call_length;
CORE_ADDR return_pc = avr_convert_iaddr_to_raw (bp_addr);
int regnum = AVR_ARGN_REGNUM;
struct stack_item *si = NULL;
-#if 0
- /* FIXME: TRoth/2003-06-18: Not sure what to do when returning a struct. */
if (struct_return)
{
- fprintf_unfiltered (gdb_stderr, "struct_return: 0x%lx\n", struct_addr);
- write_register (argreg--, struct_addr & 0xff);
- write_register (argreg--, (struct_addr >>8) & 0xff);
+ regcache_cooked_write_unsigned
+ (regcache, regnum--, (struct_addr >> 8) & 0xff);
+ regcache_cooked_write_unsigned
+ (regcache, regnum--, struct_addr & 0xff);
+ /* SP being post decremented, we need to reserve one byte so that the
+ return address won't overwrite the result (or vice-versa). */
+ if (sp == struct_addr)
+ sp--;
}
-#endif
for (i = 0; i < nargs; i++)
{
int last_regnum;
int j;
struct value *arg = args[i];
- struct type *type = check_typedef (VALUE_TYPE (arg));
- char *contents = VALUE_CONTENTS (arg);
+ struct type *type = check_typedef (value_type (arg));
+ const bfd_byte *contents = value_contents (arg);
int len = TYPE_LENGTH (type);
- /* Calculate the potential last register needed. */
+ /* Calculate the potential last register needed. */
last_regnum = regnum - (len + (len & 1));
- /* If there are registers available, use them. Once we start putting
- stuff on the stack, all subsequent args go on stack. */
+ /* If there are registers available, use them. Once we start putting
+ stuff on the stack, all subsequent args go on stack. */
if ((si == NULL) && (last_regnum >= 8))
{
ULONGEST val;
- /* Skip a register for odd length args. */
+ /* Skip a register for odd length args. */
if (len & 1)
regnum--;
- val = extract_unsigned_integer (contents, len);
- for (j=0; j<len; j++)
- {
- regcache_cooked_write_unsigned (regcache, regnum--,
- val >> (8*(len-j-1)));
- }
+ val = extract_unsigned_integer (contents, len, byte_order);
+ for (j = 0; j < len; j++)
+ regcache_cooked_write_unsigned
+ (regcache, regnum--, val >> (8 * (len - j - 1)));
}
- /* No registers available, push the args onto the stack. */
+ /* No registers available, push the args onto the stack. */
else
{
- /* From here on, we don't care about regnum. */
+ /* From here on, we don't care about regnum. */
si = push_stack_item (si, contents, len);
}
}
- /* Push args onto the stack. */
+ /* Push args onto the stack. */
while (si)
{
sp -= si->len;
- /* Add 1 to sp here to account for post decr nature of pushes. */
- write_memory (sp+1, si->data, si->len);
+ /* Add 1 to sp here to account for post decr nature of pushes. */
+ write_memory (sp + 1, si->data, si->len);
si = pop_stack_item (si);
}
/* Set the return address. For the avr, the return address is the BP_ADDR.
Need to push the return address onto the stack noting that it needs to be
in big-endian order on the stack. */
- buf[0] = (return_pc >> 8) & 0xff;
- buf[1] = return_pc & 0xff;
+ for (i = 1; i <= call_length; i++)
+ {
+ buf[call_length - i] = return_pc & 0xff;
+ return_pc >>= 8;
+ }
- sp -= 2;
- write_memory (sp+1, buf, 2); /* Add one since pushes are post decr ops. */
+ sp -= call_length;
+ /* Use 'sp + 1' since pushes are post decr ops. */
+ write_memory (sp + 1, buf, call_length);
- /* Finally, update the SP register. */
+ /* Finally, update the SP register. */
regcache_cooked_write_unsigned (regcache, AVR_SP_REGNUM,
avr_convert_saddr_to_raw (sp));
- return sp;
+ /* Return SP value for the dummy frame, where the return address hasn't been
+ pushed. */
+ return sp + call_length;
+}
+
+/* Unfortunately dwarf2 register for SP is 32. */
+
+static int
+avr_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
+{
+ if (reg >= 0 && reg < 32)
+ return reg;
+ if (reg == 32)
+ return AVR_SP_REGNUM;
+
+ warning (_("Unmapped DWARF Register #%d encountered."), reg);
+
+ return -1;
}
-/* Initialize the gdbarch structure for the AVR's. */
+/* Initialize the gdbarch structure for the AVR's. */
static struct gdbarch *
avr_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
+ struct gdbarch_list *best_arch;
+ int call_length;
- /* Find a candidate among the list of pre-declared architectures. */
- arches = gdbarch_list_lookup_by_info (arches, &info);
- if (arches != NULL)
- return arches->gdbarch;
-
- /* None found, create a new architecture from the information provided. */
- tdep = XMALLOC (struct gdbarch_tdep);
- gdbarch = gdbarch_alloc (&info, tdep);
-
- /* If we ever need to differentiate the device types, do it here. */
+ /* Avr-6 call instructions save 3 bytes. */
switch (info.bfd_arch_info->mach)
{
case bfd_mach_avr1:
case bfd_mach_avr3:
case bfd_mach_avr4:
case bfd_mach_avr5:
+ default:
+ call_length = 2;
+ break;
+ case bfd_mach_avr6:
+ call_length = 3;
break;
}
+ /* If there is already a candidate, use it. */
+ for (best_arch = gdbarch_list_lookup_by_info (arches, &info);
+ best_arch != NULL;
+ best_arch = gdbarch_list_lookup_by_info (best_arch->next, &info))
+ {
+ if (gdbarch_tdep (best_arch->gdbarch)->call_length == call_length)
+ return best_arch->gdbarch;
+ }
+
+ /* None found, create a new architecture from the information provided. */
+ tdep = XMALLOC (struct gdbarch_tdep);
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ tdep->call_length = call_length;
+
+ /* Create a type for PC. We can't use builtin types here, as they may not
+ be defined. */
+ tdep->void_type = arch_type (gdbarch, TYPE_CODE_VOID, 1, "void");
+ tdep->func_void_type = make_function_type (tdep->void_type, NULL);
+ tdep->pc_type = arch_type (gdbarch, TYPE_CODE_PTR, 4, NULL);
+ TYPE_TARGET_TYPE (tdep->pc_type) = tdep->func_void_type;
+ TYPE_UNSIGNED (tdep->pc_type) = 1;
+
set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_int_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
- set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_little);
- set_gdbarch_double_format (gdbarch, &floatformat_ieee_single_little);
- set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_single_little);
+ set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
+ set_gdbarch_double_format (gdbarch, floatformats_ieee_single);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ieee_single);
set_gdbarch_read_pc (gdbarch, avr_read_pc);
set_gdbarch_write_pc (gdbarch, avr_write_pc);
- set_gdbarch_read_sp (gdbarch, avr_read_sp);
set_gdbarch_num_regs (gdbarch, AVR_NUM_REGS);
set_gdbarch_register_name (gdbarch, avr_register_name);
set_gdbarch_register_type (gdbarch, avr_register_type);
- set_gdbarch_extract_return_value (gdbarch, avr_extract_return_value);
+ set_gdbarch_num_pseudo_regs (gdbarch, AVR_NUM_PSEUDO_REGS);
+ set_gdbarch_pseudo_register_read (gdbarch, avr_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, avr_pseudo_register_write);
+
+ set_gdbarch_return_value (gdbarch, avr_return_value);
set_gdbarch_print_insn (gdbarch, print_insn_avr);
set_gdbarch_push_dummy_call (gdbarch, avr_push_dummy_call);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, avr_dwarf_reg_to_regnum);
+
set_gdbarch_address_to_pointer (gdbarch, avr_address_to_pointer);
set_gdbarch_pointer_to_address (gdbarch, avr_pointer_to_address);
+ set_gdbarch_integer_to_address (gdbarch, avr_integer_to_address);
set_gdbarch_skip_prologue (gdbarch, avr_skip_prologue);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, avr_breakpoint_from_pc);
- frame_unwind_append_sniffer (gdbarch, avr_frame_sniffer);
+ frame_unwind_append_unwinder (gdbarch, &avr_frame_unwind);
frame_base_set_default (gdbarch, &avr_frame_base);
- set_gdbarch_unwind_dummy_id (gdbarch, avr_unwind_dummy_id);
+ set_gdbarch_dummy_id (gdbarch, avr_dummy_id);
set_gdbarch_unwind_pc (gdbarch, avr_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, avr_unwind_sp);
return gdbarch;
}
/* Send a query request to the avr remote target asking for values of the io
- registers. If args parameter is not NULL, then the user has requested info
+ registers. If args parameter is not NULL, then the user has requested info
on a specific io register [This still needs implemented and is ignored for
- now]. The query string should be one of these forms:
+ now]. The query string should be one of these forms:
"Ravr.io_reg" -> reply is "NN" number of io registers
"Ravr.io_reg:addr,len" where addr is first register and len is number of
- registers to be read. The reply should be "<NAME>,VV;" for each io register
+ registers to be read. The reply should be "<NAME>,VV;" for each io register
where, <NAME> is a string, and VV is the hex value of the register.
- All io registers are 8-bit. */
+ All io registers are 8-bit. */
static void
avr_io_reg_read_command (char *args, int from_tty)
{
LONGEST bufsiz = 0;
- char buf[400];
+ gdb_byte *buf;
char query[400];
char *p;
unsigned int nreg = 0;
unsigned int val;
int i, j, k, step;
- /* Just get the maximum buffer size. */
- bufsiz = target_read_partial (¤t_target, TARGET_OBJECT_AVR,
- NULL, NULL, 0, 0);
- if (bufsiz < 0)
- {
- fprintf_unfiltered (gdb_stderr,
- "ERR: info io_registers NOT supported by current "
- "target\n");
- return;
- }
- if (bufsiz > sizeof (buf))
- bufsiz = sizeof (buf);
-
- /* Find out how many io registers the target has. */
- strcpy (query, "avr.io_reg");
- target_read_partial (¤t_target, TARGET_OBJECT_AVR, query, buf, 0,
- bufsiz);
+ /* Find out how many io registers the target has. */
+ bufsiz = target_read_alloc (¤t_target, TARGET_OBJECT_AVR,
+ "avr.io_reg", &buf);
- if (strncmp (buf, "", bufsiz) == 0)
+ if (bufsiz <= 0)
{
fprintf_unfiltered (gdb_stderr,
- "info io_registers NOT supported by target\n");
+ _("ERR: info io_registers NOT supported "
+ "by current target\n"));
return;
}
if (sscanf (buf, "%x", &nreg) != 1)
{
fprintf_unfiltered (gdb_stderr,
- "Error fetching number of io registers\n");
+ _("Error fetching number of io registers\n"));
+ xfree (buf);
return;
}
+ xfree (buf);
+
reinitialize_more_filter ();
- printf_unfiltered ("Target has %u io registers:\n\n", nreg);
+ printf_unfiltered (_("Target has %u io registers:\n\n"), nreg);
/* only fetch up to 8 registers at a time to keep the buffer small */
step = 8;
j = nreg - i; /* last block is less than 8 registers */
snprintf (query, sizeof (query) - 1, "avr.io_reg:%x,%x", i, j);
- target_read_partial (¤t_target, TARGET_OBJECT_AVR, query, buf,
- 0, bufsiz);
+ bufsiz = target_read_alloc (¤t_target, TARGET_OBJECT_AVR,
+ query, &buf);
p = buf;
for (k = i; k < (i + j); k++)
break;
}
}
+
+ xfree (buf);
}
}
/* Add a new command to allow the user to query the avr remote target for
the values of the io space registers in a saner way than just using
- `x/NNNb ADDR`. */
+ `x/NNNb ADDR`. */
/* FIXME: TRoth/2002-02-18: This should probably be changed to 'info avr
- io_registers' to signify it is not available on other platforms. */
+ io_registers' to signify it is not available on other platforms. */
add_cmd ("io_registers", class_info, avr_io_reg_read_command,
- "query remote avr target for io space register values", &infolist);
+ _("query remote avr target for io space register values"),
+ &infolist);
}