/* Target-dependent code for Atmel AVR, for GDB.
- Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
- Free Software Foundation, Inc.
+
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+ 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* Contributed by Theodore A. Roth, troth@openavr.org */
by Denis Chertykov, denisc@overta.ru */
#include "defs.h"
+#include "frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "trad-frame.h"
#include "gdbcmd.h"
#include "gdbcore.h"
+#include "gdbtypes.h"
#include "inferior.h"
#include "symfile.h"
#include "arch-utils.h"
#include "regcache.h"
#include "gdb_string.h"
+#include "dis-asm.h"
/* AVR Background:
(AVR micros are pure Harvard Architecture processors.)
The AVR family of microcontrollers have three distinctly different memory
- spaces: flash, sram and eeprom. The flash is 16 bits wide and is used for
- the most part to store program instructions. The sram is 8 bits wide and is
- used for the stack and the heap. Some devices lack sram and some can have
+ spaces: flash, sram and eeprom. The flash is 16 bits wide and is used for
+ the most part to store program instructions. The sram is 8 bits wide and is
+ used for the stack and the heap. Some devices lack sram and some can have
an additional external sram added on as a peripheral.
The eeprom is 8 bits wide and is used to store data when the device is
- powered down. Eeprom is not directly accessible, it can only be accessed
- via io-registers using a special algorithm. Accessing eeprom via gdb's
+ powered down. Eeprom is not directly accessible, it can only be accessed
+ via io-registers using a special algorithm. Accessing eeprom via gdb's
remote serial protocol ('m' or 'M' packets) looks difficult to do and is
not included at this time.
work, the remote target must be able to handle eeprom accesses and perform
the address translation.]
- All three memory spaces have physical addresses beginning at 0x0. In
+ All three memory spaces have physical addresses beginning at 0x0. In
addition, the flash is addressed by gcc/binutils/gdb with respect to 8 bit
bytes instead of the 16 bit wide words used by the real device for the
Program Counter.
In order for remote targets to work correctly, extra bits must be added to
addresses before they are send to the target or received from the target
- via the remote serial protocol. The extra bits are the MSBs and are used to
- decode which memory space the address is referring to. */
+ via the remote serial protocol. The extra bits are the MSBs and are used to
+ decode which memory space the address is referring to. */
#undef XMALLOC
#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
-#undef EXTRACT_INSN
-#define EXTRACT_INSN(addr) extract_unsigned_integer(addr,2)
-
/* Constants: prefixed with AVR_ to avoid name space clashes */
enum
AVR_NUM_REGS = 32 + 1 /*SREG*/ + 1 /*SP*/ + 1 /*PC*/,
AVR_NUM_REG_BYTES = 32 + 1 /*SREG*/ + 2 /*SP*/ + 4 /*PC*/,
+ /* Pseudo registers. */
+ AVR_PSEUDO_PC_REGNUM = 35,
+ AVR_NUM_PSEUDO_REGS = 1,
+
AVR_PC_REG_INDEX = 35, /* index into array of registers */
- AVR_MAX_PROLOGUE_SIZE = 56, /* bytes */
+ AVR_MAX_PROLOGUE_SIZE = 64, /* bytes */
- /* Count of pushed registers. From r2 to r17 (inclusively), r28, r29 */
+ /* Count of pushed registers. From r2 to r17 (inclusively), r28, r29 */
AVR_MAX_PUSHES = 18,
- /* Number of the last pushed register. r17 for current avr-gcc */
+ /* Number of the last pushed register. r17 for current avr-gcc */
AVR_LAST_PUSHED_REGNUM = 17,
+ AVR_ARG1_REGNUM = 24, /* Single byte argument */
+ AVR_ARGN_REGNUM = 25, /* Multi byte argments */
+
+ AVR_RET1_REGNUM = 24, /* Single byte return value */
+ AVR_RETN_REGNUM = 25, /* Multi byte return value */
+
/* FIXME: TRoth/2002-01-??: Can we shift all these memory masks left 8
- bits? Do these have to match the bfd vma values?. It sure would make
+ bits? Do these have to match the bfd vma values? It sure would make
things easier in the future if they didn't need to match.
Note: I chose these values so as to be consistent with bfd vma
addresses.
TRoth/2002-04-08: There is already a conflict with very large programs
- in the mega128. The mega128 has 128K instruction bytes (64K words),
+ in the mega128. The mega128 has 128K instruction bytes (64K words),
thus the Most Significant Bit is 0x10000 which gets masked off my
AVR_MEM_MASK.
thus requires a 17-bit address.
For now, I've just removed the EEPROM mask and changed AVR_MEM_MASK
- from 0x00ff0000 to 0x00f00000. Eeprom is not accessible from gdb yet,
+ from 0x00ff0000 to 0x00f00000. Eeprom is not accessible from gdb yet,
but could be for some remote targets by just adding the correct offset
to the address and letting the remote target handle the low-level
- details of actually accessing the eeprom. */
+ details of actually accessing the eeprom. */
AVR_IMEM_START = 0x00000000, /* INSN memory */
AVR_SMEM_START = 0x00800000, /* SRAM memory */
#endif
};
+/* Prologue types:
+
+ NORMAL and CALL are the typical types (the -mcall-prologues gcc option
+ causes the generation of the CALL type prologues). */
+
+enum {
+ AVR_PROLOGUE_NONE, /* No prologue */
+ AVR_PROLOGUE_NORMAL,
+ AVR_PROLOGUE_CALL, /* -mcall-prologues */
+ AVR_PROLOGUE_MAIN,
+ AVR_PROLOGUE_INTR, /* interrupt handler */
+ AVR_PROLOGUE_SIG, /* signal handler */
+};
+
/* Any function with a frame looks like this
....... <-SP POINTS HERE
LOCALS1 <-FP POINTS HERE
FIRST ARG
SECOND ARG */
-struct frame_extra_info
+struct avr_unwind_cache
{
- CORE_ADDR return_pc;
- CORE_ADDR args_pointer;
- int locals_size;
- int framereg;
- int framesize;
- int is_main;
+ /* The previous frame's inner most stack address. Used as this
+ frame ID's stack_addr. */
+ CORE_ADDR prev_sp;
+ /* The frame's base, optionally used by the high-level debug info. */
+ CORE_ADDR base;
+ int size;
+ int prologue_type;
+ /* Table indicating the location of each and every register. */
+ struct trad_frame_saved_reg *saved_regs;
};
struct gdbarch_tdep
{
- /* FIXME: TRoth: is there anything to put here? */
- int foo;
+ /* Number of bytes stored to the stack by call instructions.
+ 2 bytes for avr1-5, 3 bytes for avr6. */
+ int call_length;
+
+ /* Type for void. */
+ struct type *void_type;
+ /* Type for a function returning void. */
+ struct type *func_void_type;
+ /* Type for a pointer to a function. Used for the type of PC. */
+ struct type *pc_type;
};
-/* Lookup the name of a register given it's number. */
+/* Lookup the name of a register given it's number. */
static const char *
-avr_register_name (int regnum)
+avr_register_name (struct gdbarch *gdbarch, int regnum)
{
- static char *register_names[] = {
+ static const char * const register_names[] = {
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
- "SREG", "SP", "PC"
+ "SREG", "SP", "PC2",
+ "pc"
};
if (regnum < 0)
return NULL;
return register_names[regnum];
}
-/* Index within `registers' of the first byte of the space for
- register REGNUM. */
-
-static int
-avr_register_byte (int regnum)
-{
- if (regnum < AVR_PC_REGNUM)
- return regnum;
- else
- return AVR_PC_REG_INDEX;
-}
-
-/* Number of bytes of storage in the actual machine representation for
- register REGNUM. */
-
-static int
-avr_register_raw_size (int regnum)
-{
- switch (regnum)
- {
- case AVR_PC_REGNUM:
- return 4;
- case AVR_SP_REGNUM:
- case AVR_FP_REGNUM:
- return 2;
- default:
- return 1;
- }
-}
-
-/* Number of bytes of storage in the program's representation
- for register N. */
-
-static int
-avr_register_virtual_size (int regnum)
-{
- return TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (regnum));
-}
-
/* Return the GDB type object for the "standard" data type
of data in register N. */
static struct type *
-avr_register_virtual_type (int regnum)
+avr_register_type (struct gdbarch *gdbarch, int reg_nr)
{
- switch (regnum)
- {
- case AVR_PC_REGNUM:
- return builtin_type_unsigned_long;
- case AVR_SP_REGNUM:
- return builtin_type_unsigned_short;
- default:
- return builtin_type_unsigned_char;
- }
+ if (reg_nr == AVR_PC_REGNUM)
+ return builtin_type (gdbarch)->builtin_uint32;
+ if (reg_nr == AVR_PSEUDO_PC_REGNUM)
+ return gdbarch_tdep (gdbarch)->pc_type;
+ if (reg_nr == AVR_SP_REGNUM)
+ return builtin_type (gdbarch)->builtin_data_ptr;
+ return builtin_type (gdbarch)->builtin_uint8;
}
-/* Instruction address checks and convertions. */
+/* Instruction address checks and convertions. */
static CORE_ADDR
avr_make_iaddr (CORE_ADDR x)
return ((x) | AVR_IMEM_START);
}
-static int
-avr_iaddr_p (CORE_ADDR x)
-{
- return (((x) & AVR_MEM_MASK) == AVR_IMEM_START);
-}
-
-/* FIXME: TRoth: Really need to use a larger mask for instructions. Some
+/* FIXME: TRoth: Really need to use a larger mask for instructions. Some
devices are already up to 128KBytes of flash space.
- TRoth/2002-04-8: See comment above where AVR_IMEM_START is defined. */
+ TRoth/2002-04-8: See comment above where AVR_IMEM_START is defined. */
static CORE_ADDR
avr_convert_iaddr_to_raw (CORE_ADDR x)
return ((x) & 0xffffffff);
}
-/* SRAM address checks and convertions. */
+/* SRAM address checks and convertions. */
static CORE_ADDR
avr_make_saddr (CORE_ADDR x)
{
- return ((x) | AVR_SMEM_START);
-}
+ /* Return 0 for NULL. */
+ if (x == 0)
+ return 0;
-static int
-avr_saddr_p (CORE_ADDR x)
-{
- return (((x) & AVR_MEM_MASK) == AVR_SMEM_START);
+ return ((x) | AVR_SMEM_START);
}
static CORE_ADDR
return ((x) & 0xffffffff);
}
-/* EEPROM address checks and convertions. I don't know if these will ever
- actually be used, but I've added them just the same. TRoth */
+/* EEPROM address checks and convertions. I don't know if these will ever
+ actually be used, but I've added them just the same. TRoth */
/* TRoth/2002-04-08: Commented out for now to allow fix for problem with large
- programs in the mega128. */
+ programs in the mega128. */
/* static CORE_ADDR */
/* avr_make_eaddr (CORE_ADDR x) */
/* return ((x) & 0xffffffff); */
/* } */
-/* Convert from address to pointer and vice-versa. */
+/* Convert from address to pointer and vice-versa. */
static void
-avr_address_to_pointer (struct type *type, void *buf, CORE_ADDR addr)
+avr_address_to_pointer (struct gdbarch *gdbarch,
+ struct type *type, gdb_byte *buf, CORE_ADDR addr)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
/* Is it a code address? */
if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC
|| TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_METHOD)
{
- store_unsigned_integer (buf, TYPE_LENGTH (type),
+ store_unsigned_integer (buf, TYPE_LENGTH (type), byte_order,
avr_convert_iaddr_to_raw (addr >> 1));
}
else
{
/* Strip off any upper segment bits. */
- store_unsigned_integer (buf, TYPE_LENGTH (type),
+ store_unsigned_integer (buf, TYPE_LENGTH (type), byte_order,
avr_convert_saddr_to_raw (addr));
}
}
static CORE_ADDR
-avr_pointer_to_address (struct type *type, const void *buf)
+avr_pointer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
{
- CORE_ADDR addr = extract_unsigned_integer (buf, TYPE_LENGTH (type));
-
- if (TYPE_CODE_SPACE (TYPE_TARGET_TYPE (type)))
- {
- fprintf_unfiltered (gdb_stderr, "CODE_SPACE ---->> ptr->addr: 0x%lx\n",
- addr);
- fprintf_unfiltered (gdb_stderr,
- "+++ If you see this, please send me an email <troth@openavr.org>\n");
- }
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR addr
+ = extract_unsigned_integer (buf, TYPE_LENGTH (type), byte_order);
/* Is it a code address? */
if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC
}
static CORE_ADDR
-avr_read_pc (ptid_t ptid)
+avr_integer_to_address (struct gdbarch *gdbarch,
+ struct type *type, const gdb_byte *buf)
{
- ptid_t save_ptid;
- CORE_ADDR pc;
- CORE_ADDR retval;
-
- save_ptid = inferior_ptid;
- inferior_ptid = ptid;
- pc = (int) read_register (AVR_PC_REGNUM);
- inferior_ptid = save_ptid;
- retval = avr_make_iaddr (pc);
- return retval;
-}
-
-static void
-avr_write_pc (CORE_ADDR val, ptid_t ptid)
-{
- ptid_t save_ptid;
+ ULONGEST addr = unpack_long (type, buf);
- save_ptid = inferior_ptid;
- inferior_ptid = ptid;
- write_register (AVR_PC_REGNUM, avr_convert_iaddr_to_raw (val));
- inferior_ptid = save_ptid;
+ return avr_make_saddr (addr);
}
static CORE_ADDR
-avr_read_sp (void)
+avr_read_pc (struct regcache *regcache)
{
- return (avr_make_saddr (read_register (AVR_SP_REGNUM)));
+ ULONGEST pc;
+ regcache_cooked_read_unsigned (regcache, AVR_PC_REGNUM, &pc);
+ return avr_make_iaddr (pc);
}
static void
-avr_write_sp (CORE_ADDR val)
+avr_write_pc (struct regcache *regcache, CORE_ADDR val)
{
- write_register (AVR_SP_REGNUM, avr_convert_saddr_to_raw (val));
+ regcache_cooked_write_unsigned (regcache, AVR_PC_REGNUM,
+ avr_convert_iaddr_to_raw (val));
}
-static CORE_ADDR
-avr_read_fp (void)
+static enum register_status
+avr_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
+ int regnum, gdb_byte *buf)
{
- return (avr_make_saddr (read_register (AVR_FP_REGNUM)));
-}
+ ULONGEST val;
+ enum register_status status;
-/* Translate a GDB virtual ADDR/LEN into a format the remote target
- understands. Returns number of bytes that can be transfered
- starting at TARG_ADDR. Return ZERO if no bytes can be transfered
- (segmentation fault).
-
- TRoth/2002-04-08: Could this be used to check for dereferencing an invalid
- pointer? */
+ switch (regnum)
+ {
+ case AVR_PSEUDO_PC_REGNUM:
+ status = regcache_raw_read_unsigned (regcache, AVR_PC_REGNUM, &val);
+ if (status != REG_VALID)
+ return status;
+ val >>= 1;
+ store_unsigned_integer (buf, 4, gdbarch_byte_order (gdbarch), val);
+ return status;
+ default:
+ internal_error (__FILE__, __LINE__, _("invalid regnum"));
+ }
+}
static void
-avr_remote_translate_xfer_address (struct gdbarch *gdbarch,
- struct regcache *regcache,
- CORE_ADDR memaddr, int nr_bytes,
- CORE_ADDR *targ_addr, int *targ_len)
+avr_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
+ int regnum, const gdb_byte *buf)
{
- long out_addr;
- long out_len;
+ ULONGEST val;
- /* FIXME: TRoth: Do nothing for now. Will need to examine memaddr at this
- point and see if the high bit are set with the masks that we want. */
-
- *targ_addr = memaddr;
- *targ_len = nr_bytes;
+ switch (regnum)
+ {
+ case AVR_PSEUDO_PC_REGNUM:
+ val = extract_unsigned_integer (buf, 4, gdbarch_byte_order (gdbarch));
+ val <<= 1;
+ regcache_raw_write_unsigned (regcache, AVR_PC_REGNUM, val);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("invalid regnum"));
+ }
}
-/* avr_scan_prologue is also used as the
- deprecated_frame_init_saved_regs().
-
- Put here the code to store, into fi->saved_regs, the addresses of
- the saved registers of frame described by FRAME_INFO. This
- includes special registers such as pc and fp saved in special ways
- in the stack frame. sp is even more special: the address we return
- for it IS the sp for the next frame. */
+/* Function: avr_scan_prologue
-/* Function: avr_scan_prologue (helper function for avr_init_extra_frame_info)
- This function decodes a AVR function prologue to determine:
+ This function decodes an AVR function prologue to determine:
1) the size of the stack frame
2) which registers are saved on it
3) the offsets of saved regs
- This information is stored in the "extra_info" field of the frame_info.
-
- A typical AVR function prologue might look like this:
- push rXX
- push r28
- push r29
- in r28,__SP_L__
- in r29,__SP_H__
- sbiw r28,<LOCALS_SIZE>
- in __tmp_reg__,__SREG__
+ This information is stored in the avr_unwind_cache structure.
+
+ Some devices lack the sbiw instruction, so on those replace this:
+ sbiw r28, XX
+ with this:
+ subi r28,lo8(XX)
+ sbci r29,hi8(XX)
+
+ A typical AVR function prologue with a frame pointer might look like this:
+ push rXX ; saved regs
+ ...
+ push r28
+ push r29
+ in r28,__SP_L__
+ in r29,__SP_H__
+ sbiw r28,<LOCALS_SIZE>
+ in __tmp_reg__,__SREG__
+ cli
+ out __SP_H__,r29
+ out __SREG__,__tmp_reg__
+ out __SP_L__,r28
+
+ A typical AVR function prologue without a frame pointer might look like
+ this:
+ push rXX ; saved regs
+ ...
+
+ A main function prologue looks like this:
+ ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>)
+ ldi r29,hi8(<RAM_ADDR> - <LOCALS_SIZE>)
+ out __SP_H__,r29
+ out __SP_L__,r28
+
+ A signal handler prologue looks like this:
+ push __zero_reg__
+ push __tmp_reg__
+ in __tmp_reg__, __SREG__
+ push __tmp_reg__
+ clr __zero_reg__
+ push rXX ; save registers r18:r27, r30:r31
+ ...
+ push r28 ; save frame pointer
+ push r29
+ in r28, __SP_L__
+ in r29, __SP_H__
+ sbiw r28, <LOCALS_SIZE>
+ out __SP_H__, r29
+ out __SP_L__, r28
+
+ A interrupt handler prologue looks like this:
+ sei
+ push __zero_reg__
+ push __tmp_reg__
+ in __tmp_reg__, __SREG__
+ push __tmp_reg__
+ clr __zero_reg__
+ push rXX ; save registers r18:r27, r30:r31
+ ...
+ push r28 ; save frame pointer
+ push r29
+ in r28, __SP_L__
+ in r29, __SP_H__
+ sbiw r28, <LOCALS_SIZE>
cli
- out __SP_L__,r28
- out __SREG__,__tmp_reg__
- out __SP_H__,r29
-
- A `-mcall-prologues' prologue look like this:
- ldi r26,<LOCALS_SIZE>
- ldi r27,<LOCALS_SIZE>/265
- ldi r30,pm_lo8(.L_foo_body)
- ldi r31,pm_hi8(.L_foo_body)
- rjmp __prologue_saves__+RRR
- .L_foo_body: */
+ out __SP_H__, r29
+ sei
+ out __SP_L__, r28
+
+ A `-mcall-prologues' prologue looks like this (Note that the megas use a
+ jmp instead of a rjmp, thus the prologue is one word larger since jmp is a
+ 32 bit insn and rjmp is a 16 bit insn):
+ ldi r26,lo8(<LOCALS_SIZE>)
+ ldi r27,hi8(<LOCALS_SIZE>)
+ ldi r30,pm_lo8(.L_foo_body)
+ ldi r31,pm_hi8(.L_foo_body)
+ rjmp __prologue_saves__+RRR
+ .L_foo_body: */
+
+/* Not really part of a prologue, but still need to scan for it, is when a
+ function prologue moves values passed via registers as arguments to new
+ registers. In this case, all local variables live in registers, so there
+ may be some register saves. This is what it looks like:
+ movw rMM, rNN
+ ...
+
+ There could be multiple movw's. If the target doesn't have a movw insn, it
+ will use two mov insns. This could be done after any of the above prologue
+ types. */
-static void
-avr_scan_prologue (struct frame_info *fi)
+static CORE_ADDR
+avr_scan_prologue (struct gdbarch *gdbarch, CORE_ADDR pc_beg, CORE_ADDR pc_end,
+ struct avr_unwind_cache *info)
{
- CORE_ADDR prologue_start;
- CORE_ADDR prologue_end;
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
int i;
unsigned short insn;
- int regno;
int scan_stage = 0;
- char *name;
struct minimal_symbol *msymbol;
- int prologue_len;
unsigned char prologue[AVR_MAX_PROLOGUE_SIZE];
int vpc = 0;
+ int len;
- get_frame_extra_info (fi)->framereg = AVR_SP_REGNUM;
-
- if (find_pc_partial_function
- (get_frame_pc (fi), &name, &prologue_start, &prologue_end))
- {
- struct symtab_and_line sal = find_pc_line (prologue_start, 0);
-
- if (sal.line == 0) /* no line info, use current PC */
- prologue_end = get_frame_pc (fi);
- else if (sal.end < prologue_end) /* next line begins after fn end */
- prologue_end = sal.end; /* (probably means no prologue) */
- }
- else
- /* We're in the boondocks: allow for */
- /* 19 pushes, an add, and "mv fp,sp" */
- prologue_end = prologue_start + AVR_MAX_PROLOGUE_SIZE;
-
- prologue_end = min (prologue_end, get_frame_pc (fi));
-
- /* Search the prologue looking for instructions that set up the
- frame pointer, adjust the stack pointer, and save registers. */
+ len = pc_end - pc_beg;
+ if (len > AVR_MAX_PROLOGUE_SIZE)
+ len = AVR_MAX_PROLOGUE_SIZE;
- get_frame_extra_info (fi)->framesize = 0;
- prologue_len = prologue_end - prologue_start;
- read_memory (prologue_start, prologue, prologue_len);
+ /* FIXME: TRoth/2003-06-11: This could be made more efficient by only
+ reading in the bytes of the prologue. The problem is that the figuring
+ out where the end of the prologue is is a bit difficult. The old code
+ tried to do that, but failed quite often. */
+ read_memory (pc_beg, prologue, len);
/* Scanning main()'s prologue
ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>)
out __SP_H__,r29
out __SP_L__,r28 */
- if (name && strcmp ("main", name) == 0 && prologue_len == 8)
+ if (len >= 4)
{
CORE_ADDR locals;
- unsigned char img[] = {
+ static const unsigned char img[] = {
0xde, 0xbf, /* out __SP_H__,r29 */
0xcd, 0xbf /* out __SP_L__,r28 */
};
- get_frame_extra_info (fi)->framereg = AVR_FP_REGNUM;
- insn = EXTRACT_INSN (&prologue[vpc]);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
/* ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>) */
if ((insn & 0xf0f0) == 0xe0c0)
{
locals = (insn & 0xf) | ((insn & 0x0f00) >> 4);
- insn = EXTRACT_INSN (&prologue[vpc + 2]);
+ insn = extract_unsigned_integer (&prologue[vpc + 2], 2, byte_order);
/* ldi r29,hi8(<RAM_ADDR> - <LOCALS_SIZE>) */
if ((insn & 0xf0f0) == 0xe0d0)
{
locals |= ((insn & 0xf) | ((insn & 0x0f00) >> 4)) << 8;
- if (memcmp (prologue + vpc + 4, img, sizeof (img)) == 0)
+ if (vpc + 4 + sizeof (img) < len
+ && memcmp (prologue + vpc + 4, img, sizeof (img)) == 0)
{
- deprecated_update_frame_base_hack (fi, locals);
-
- get_frame_extra_info (fi)->is_main = 1;
- return;
+ info->prologue_type = AVR_PROLOGUE_MAIN;
+ info->base = locals;
+ return pc_beg + 4;
}
}
}
}
/* Scanning `-mcall-prologues' prologue
- FIXME: mega prologue have a 12 bytes long */
+ Classic prologue is 10 bytes, mega prologue is a 12 bytes long */
- while (prologue_len <= 12) /* I'm use while to avoit many goto's */
+ while (1) /* Using a while to avoid many goto's */
{
int loc_size;
int body_addr;
unsigned num_pushes;
+ int pc_offset = 0;
+
+ /* At least the fifth instruction must have been executed to
+ modify frame shape. */
+ if (len < 10)
+ break;
- insn = EXTRACT_INSN (&prologue[vpc]);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
/* ldi r26,<LOCALS_SIZE> */
if ((insn & 0xf0f0) != 0xe0a0)
break;
loc_size = (insn & 0xf) | ((insn & 0x0f00) >> 4);
+ pc_offset += 2;
- insn = EXTRACT_INSN (&prologue[vpc + 2]);
+ insn = extract_unsigned_integer (&prologue[vpc + 2], 2, byte_order);
/* ldi r27,<LOCALS_SIZE> / 256 */
if ((insn & 0xf0f0) != 0xe0b0)
break;
loc_size |= ((insn & 0xf) | ((insn & 0x0f00) >> 4)) << 8;
+ pc_offset += 2;
- insn = EXTRACT_INSN (&prologue[vpc + 4]);
+ insn = extract_unsigned_integer (&prologue[vpc + 4], 2, byte_order);
/* ldi r30,pm_lo8(.L_foo_body) */
if ((insn & 0xf0f0) != 0xe0e0)
break;
body_addr = (insn & 0xf) | ((insn & 0x0f00) >> 4);
+ pc_offset += 2;
- insn = EXTRACT_INSN (&prologue[vpc + 6]);
+ insn = extract_unsigned_integer (&prologue[vpc + 6], 2, byte_order);
/* ldi r31,pm_hi8(.L_foo_body) */
if ((insn & 0xf0f0) != 0xe0f0)
break;
body_addr |= ((insn & 0xf) | ((insn & 0x0f00) >> 4)) << 8;
-
- if (body_addr != (prologue_start + 10) / 2)
- break;
+ pc_offset += 2;
msymbol = lookup_minimal_symbol ("__prologue_saves__", NULL, NULL);
if (!msymbol)
break;
- /* FIXME: prologue for mega have a JMP instead of RJMP */
- insn = EXTRACT_INSN (&prologue[vpc + 8]);
+ insn = extract_unsigned_integer (&prologue[vpc + 8], 2, byte_order);
/* rjmp __prologue_saves__+RRR */
- if ((insn & 0xf000) != 0xc000)
- break;
+ if ((insn & 0xf000) == 0xc000)
+ {
+ /* Extract PC relative offset from RJMP */
+ i = (insn & 0xfff) | (insn & 0x800 ? (-1 ^ 0xfff) : 0);
+ /* Convert offset to byte addressable mode */
+ i *= 2;
+ /* Destination address */
+ i += pc_beg + 10;
+
+ if (body_addr != (pc_beg + 10)/2)
+ break;
+
+ pc_offset += 2;
+ }
+ else if ((insn & 0xfe0e) == 0x940c)
+ {
+ /* Extract absolute PC address from JMP */
+ i = (((insn & 0x1) | ((insn & 0x1f0) >> 3) << 16)
+ | (extract_unsigned_integer (&prologue[vpc + 10], 2, byte_order)
+ & 0xffff));
+ /* Convert address to byte addressable mode */
+ i *= 2;
+
+ if (body_addr != (pc_beg + 12)/2)
+ break;
+
+ pc_offset += 4;
+ }
+ else
+ break;
- /* Extract PC relative offset from RJMP */
- i = (insn & 0xfff) | (insn & 0x800 ? (-1 ^ 0xfff) : 0);
- /* Convert offset to byte addressable mode */
- i *= 2;
- /* Destination address */
- i += vpc + prologue_start + 10;
- /* Resovle offset (in words) from __prologue_saves__ symbol.
+ /* Resolve offset (in words) from __prologue_saves__ symbol.
Which is a pushes count in `-mcall-prologues' mode */
num_pushes = AVR_MAX_PUSHES - (i - SYMBOL_VALUE_ADDRESS (msymbol)) / 2;
if (num_pushes > AVR_MAX_PUSHES)
- num_pushes = 0;
+ {
+ fprintf_unfiltered (gdb_stderr, _("Num pushes too large: %d\n"),
+ num_pushes);
+ num_pushes = 0;
+ }
if (num_pushes)
{
int from;
- get_frame_saved_regs (fi)[AVR_FP_REGNUM + 1] = num_pushes;
+
+ info->saved_regs[AVR_FP_REGNUM + 1].addr = num_pushes;
if (num_pushes >= 2)
- get_frame_saved_regs (fi)[AVR_FP_REGNUM] = num_pushes - 1;
+ info->saved_regs[AVR_FP_REGNUM].addr = num_pushes - 1;
+
i = 0;
for (from = AVR_LAST_PUSHED_REGNUM + 1 - (num_pushes - 2);
from <= AVR_LAST_PUSHED_REGNUM; ++from)
- get_frame_saved_regs (fi)[from] = ++i;
+ info->saved_regs [from].addr = ++i;
}
- get_frame_extra_info (fi)->locals_size = loc_size;
- get_frame_extra_info (fi)->framesize = loc_size + num_pushes;
- get_frame_extra_info (fi)->framereg = AVR_FP_REGNUM;
- return;
+ info->size = loc_size + num_pushes;
+ info->prologue_type = AVR_PROLOGUE_CALL;
+
+ return pc_beg + pc_offset;
}
- /* Scan interrupt or signal function */
+ /* Scan for the beginning of the prologue for an interrupt or signal
+ function. Note that we have to set the prologue type here since the
+ third stage of the prologue may not be present (e.g. no saved registered
+ or changing of the SP register). */
- if (prologue_len >= 12)
+ if (1)
{
- unsigned char img[] = {
+ static const unsigned char img[] = {
0x78, 0x94, /* sei */
0x1f, 0x92, /* push r1 */
0x0f, 0x92, /* push r0 */
0x0f, 0x92, /* push r0 */
0x11, 0x24 /* clr r1 */
};
- if (memcmp (prologue, img, sizeof (img)) == 0)
+ if (len >= sizeof (img)
+ && memcmp (prologue, img, sizeof (img)) == 0)
{
+ info->prologue_type = AVR_PROLOGUE_INTR;
vpc += sizeof (img);
- get_frame_saved_regs (fi)[0] = 2;
- get_frame_saved_regs (fi)[1] = 1;
- get_frame_extra_info (fi)->framesize += 3;
+ info->saved_regs[AVR_SREG_REGNUM].addr = 3;
+ info->saved_regs[0].addr = 2;
+ info->saved_regs[1].addr = 1;
+ info->size += 3;
}
- else if (memcmp (img + 1, prologue, sizeof (img) - 1) == 0)
+ else if (len >= sizeof (img) - 2
+ && memcmp (img + 2, prologue, sizeof (img) - 2) == 0)
{
- vpc += sizeof (img) - 1;
- get_frame_saved_regs (fi)[0] = 2;
- get_frame_saved_regs (fi)[1] = 1;
- get_frame_extra_info (fi)->framesize += 3;
+ info->prologue_type = AVR_PROLOGUE_SIG;
+ vpc += sizeof (img) - 2;
+ info->saved_regs[AVR_SREG_REGNUM].addr = 3;
+ info->saved_regs[0].addr = 2;
+ info->saved_regs[1].addr = 1;
+ info->size += 2;
}
}
/* First stage of the prologue scanning.
- Scan pushes */
+ Scan pushes (saved registers) */
- for (; vpc <= prologue_len; vpc += 2)
+ for (; vpc < len; vpc += 2)
{
- insn = EXTRACT_INSN (&prologue[vpc]);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
if ((insn & 0xfe0f) == 0x920f) /* push rXX */
{
- /* Bits 4-9 contain a mask for registers R0-R32. */
- regno = (insn & 0x1f0) >> 4;
- ++get_frame_extra_info (fi)->framesize;
- get_frame_saved_regs (fi)[regno] = get_frame_extra_info (fi)->framesize;
+ /* Bits 4-9 contain a mask for registers R0-R32. */
+ int regno = (insn & 0x1f0) >> 4;
+ info->size++;
+ info->saved_regs[regno].addr = info->size;
scan_stage = 1;
}
else
break;
}
+ gdb_assert (vpc < AVR_MAX_PROLOGUE_SIZE);
+
+ /* Handle static small stack allocation using rcall or push. */
+
+ while (scan_stage == 1 && vpc < len)
+ {
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
+ if (insn == 0xd000) /* rcall .+0 */
+ {
+ info->size += gdbarch_tdep (gdbarch)->call_length;
+ vpc += 2;
+ }
+ else if (insn == 0x920f) /* push r0 */
+ {
+ info->size += 1;
+ vpc += 2;
+ }
+ else
+ break;
+ }
+
/* Second stage of the prologue scanning.
Scan:
in r28,__SP_L__
in r29,__SP_H__ */
- if (scan_stage == 1 && vpc + 4 <= prologue_len)
+ if (scan_stage == 1 && vpc < len)
{
- unsigned char img[] = {
+ static const unsigned char img[] = {
0xcd, 0xb7, /* in r28,__SP_L__ */
0xde, 0xb7 /* in r29,__SP_H__ */
};
unsigned short insn1;
- if (memcmp (prologue + vpc, img, sizeof (img)) == 0)
+ if (vpc + sizeof (img) < len
+ && memcmp (prologue + vpc, img, sizeof (img)) == 0)
{
vpc += 4;
- get_frame_extra_info (fi)->framereg = AVR_FP_REGNUM;
scan_stage = 2;
}
}
- /* Third stage of the prologue scanning. (Really two stages)
+ /* Third stage of the prologue scanning. (Really two stages).
Scan for:
sbiw r28,XX or subi r28,lo8(XX)
- sbci r29,hi8(XX)
+ sbci r29,hi8(XX)
in __tmp_reg__,__SREG__
cli
- out __SP_L__,r28
+ out __SP_H__,r29
out __SREG__,__tmp_reg__
- out __SP_H__,r29 */
+ out __SP_L__,r28 */
- if (scan_stage == 2 && vpc + 12 <= prologue_len)
+ if (scan_stage == 2 && vpc < len)
{
int locals_size = 0;
- unsigned char img[] = {
+ static const unsigned char img[] = {
0x0f, 0xb6, /* in r0,0x3f */
0xf8, 0x94, /* cli */
- 0xcd, 0xbf, /* out 0x3d,r28 ; SPL */
+ 0xde, 0xbf, /* out 0x3e,r29 ; SPH */
0x0f, 0xbe, /* out 0x3f,r0 ; SREG */
- 0xde, 0xbf /* out 0x3e,r29 ; SPH */
+ 0xcd, 0xbf /* out 0x3d,r28 ; SPL */
};
- unsigned char img_sig[] = {
- 0xcd, 0xbf, /* out 0x3d,r28 ; SPL */
- 0xde, 0xbf /* out 0x3e,r29 ; SPH */
+ static const unsigned char img_sig[] = {
+ 0xde, 0xbf, /* out 0x3e,r29 ; SPH */
+ 0xcd, 0xbf /* out 0x3d,r28 ; SPL */
};
- unsigned char img_int[] = {
+ static const unsigned char img_int[] = {
0xf8, 0x94, /* cli */
- 0xcd, 0xbf, /* out 0x3d,r28 ; SPL */
+ 0xde, 0xbf, /* out 0x3e,r29 ; SPH */
0x78, 0x94, /* sei */
- 0xde, 0xbf /* out 0x3e,r29 ; SPH */
+ 0xcd, 0xbf /* out 0x3d,r28 ; SPL */
};
- insn = EXTRACT_INSN (&prologue[vpc]);
- vpc += 2;
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
if ((insn & 0xff30) == 0x9720) /* sbiw r28,XXX */
- locals_size = (insn & 0xf) | ((insn & 0xc0) >> 2);
+ {
+ locals_size = (insn & 0xf) | ((insn & 0xc0) >> 2);
+ vpc += 2;
+ }
else if ((insn & 0xf0f0) == 0x50c0) /* subi r28,lo8(XX) */
{
locals_size = (insn & 0xf) | ((insn & 0xf00) >> 4);
- insn = EXTRACT_INSN (&prologue[vpc]);
vpc += 2;
- locals_size += ((insn & 0xf) | ((insn & 0xf00) >> 4) << 8);
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
+ vpc += 2;
+ locals_size += ((insn & 0xf) | ((insn & 0xf00) >> 4)) << 8;
}
else
- return;
- get_frame_extra_info (fi)->locals_size = locals_size;
- get_frame_extra_info (fi)->framesize += locals_size;
+ return pc_beg + vpc;
+
+ /* Scan the last part of the prologue. May not be present for interrupt
+ or signal handler functions, which is why we set the prologue type
+ when we saw the beginning of the prologue previously. */
+
+ if (vpc + sizeof (img_sig) < len
+ && memcmp (prologue + vpc, img_sig, sizeof (img_sig)) == 0)
+ {
+ vpc += sizeof (img_sig);
+ }
+ else if (vpc + sizeof (img_int) < len
+ && memcmp (prologue + vpc, img_int, sizeof (img_int)) == 0)
+ {
+ vpc += sizeof (img_int);
+ }
+ if (vpc + sizeof (img) < len
+ && memcmp (prologue + vpc, img, sizeof (img)) == 0)
+ {
+ info->prologue_type = AVR_PROLOGUE_NORMAL;
+ vpc += sizeof (img);
+ }
+
+ info->size += locals_size;
+
+ /* Fall through. */
}
-}
-/* This function actually figures out the frame address for a given pc and
- sp. This is tricky because we sometimes don't use an explicit
- frame pointer, and the previous stack pointer isn't necessarily recorded
- on the stack. The only reliable way to get this info is to
- examine the prologue. */
+ /* If we got this far, we could not scan the prologue, so just return the pc
+ of the frame plus an adjustment for argument move insns. */
-static void
-avr_init_extra_frame_info (int fromleaf, struct frame_info *fi)
+ for (; vpc < len; vpc += 2)
+ {
+ insn = extract_unsigned_integer (&prologue[vpc], 2, byte_order);
+ if ((insn & 0xff00) == 0x0100) /* movw rXX, rYY */
+ continue;
+ else if ((insn & 0xfc00) == 0x2c00) /* mov rXX, rYY */
+ continue;
+ else
+ break;
+ }
+
+ return pc_beg + vpc;
+}
+
+static CORE_ADDR
+avr_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- int reg;
+ CORE_ADDR func_addr, func_end;
+ CORE_ADDR post_prologue_pc;
- if (get_next_frame (fi))
- deprecated_update_frame_pc_hack (fi, DEPRECATED_FRAME_SAVED_PC (get_next_frame (fi)));
+ /* See what the symbol table says */
- frame_extra_info_zalloc (fi, sizeof (struct frame_extra_info));
- frame_saved_regs_zalloc (fi);
+ if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ return pc;
+
+ post_prologue_pc = skip_prologue_using_sal (gdbarch, func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+
+ {
+ CORE_ADDR prologue_end = pc;
+ struct avr_unwind_cache info = {0};
+ struct trad_frame_saved_reg saved_regs[AVR_NUM_REGS];
+
+ info.saved_regs = saved_regs;
+
+ /* Need to run the prologue scanner to figure out if the function has a
+ prologue and possibly skip over moving arguments passed via registers
+ to other registers. */
+
+ prologue_end = avr_scan_prologue (gdbarch, func_addr, func_end, &info);
+
+ if (info.prologue_type != AVR_PROLOGUE_NONE)
+ return prologue_end;
+ }
+
+ /* Either we didn't find the start of this function (nothing we can do),
+ or there's no line info, or the line after the prologue is after
+ the end of the function (there probably isn't a prologue). */
- get_frame_extra_info (fi)->return_pc = 0;
- get_frame_extra_info (fi)->args_pointer = 0;
- get_frame_extra_info (fi)->locals_size = 0;
- get_frame_extra_info (fi)->framereg = 0;
- get_frame_extra_info (fi)->framesize = 0;
- get_frame_extra_info (fi)->is_main = 0;
+ return pc;
+}
- avr_scan_prologue (fi);
+/* Not all avr devices support the BREAK insn. Those that don't should treat
+ it as a NOP. Thus, it should be ok. Since the avr is currently a remote
+ only target, this shouldn't be a problem (I hope). TRoth/2003-05-14 */
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fi), get_frame_base (fi),
- get_frame_base (fi)))
+static const unsigned char *
+avr_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR *pcptr, int *lenptr)
+{
+ static const unsigned char avr_break_insn [] = { 0x98, 0x95 };
+ *lenptr = sizeof (avr_break_insn);
+ return avr_break_insn;
+}
+
+/* Determine, for architecture GDBARCH, how a return value of TYPE
+ should be returned. If it is supposed to be returned in registers,
+ and READBUF is non-zero, read the appropriate value from REGCACHE,
+ and copy it into READBUF. If WRITEBUF is non-zero, write the value
+ from WRITEBUF into REGCACHE. */
+
+static enum return_value_convention
+avr_return_value (struct gdbarch *gdbarch, struct type *func_type,
+ struct type *valtype, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+{
+ int i;
+ /* Single byte are returned in r24.
+ Otherwise, the MSB of the return value is always in r25, calculate which
+ register holds the LSB. */
+ int lsb_reg;
+
+ if ((TYPE_CODE (valtype) == TYPE_CODE_STRUCT
+ || TYPE_CODE (valtype) == TYPE_CODE_UNION
+ || TYPE_CODE (valtype) == TYPE_CODE_ARRAY)
+ && TYPE_LENGTH (valtype) > 8)
+ return RETURN_VALUE_STRUCT_CONVENTION;
+
+ if (TYPE_LENGTH (valtype) <= 2)
+ lsb_reg = 24;
+ else if (TYPE_LENGTH (valtype) <= 4)
+ lsb_reg = 22;
+ else if (TYPE_LENGTH (valtype) <= 8)
+ lsb_reg = 18;
+ else
+ gdb_assert_not_reached ("unexpected type length");
+
+ if (writebuf != NULL)
{
- /* We need to setup fi->frame here because call_function_by_hand
- gets it wrong by assuming it's always FP. */
- deprecated_update_frame_base_hack (fi, deprecated_read_register_dummy (get_frame_pc (fi), get_frame_base (fi),
- AVR_PC_REGNUM));
+ for (i = 0; i < TYPE_LENGTH (valtype); i++)
+ regcache_cooked_write (regcache, lsb_reg + i, writebuf + i);
}
- else if (!get_next_frame (fi))
- /* this is the innermost frame? */
- deprecated_update_frame_base_hack (fi, read_register (get_frame_extra_info (fi)->framereg));
- else if (get_frame_extra_info (fi)->is_main != 1)
- /* not the innermost frame, not `main' */
- /* If we have an next frame, the callee saved it. */
- {
- struct frame_info *next_fi = get_next_frame (fi);
- if (get_frame_extra_info (fi)->framereg == AVR_SP_REGNUM)
- deprecated_update_frame_base_hack (fi, (get_frame_base (next_fi)
- + 2 /* ret addr */
- + get_frame_extra_info (next_fi)->framesize));
- /* FIXME: I don't analyse va_args functions */
- else
- {
- CORE_ADDR fp = 0;
- CORE_ADDR fp1 = 0;
- unsigned int fp_low, fp_high;
- /* Scan all frames */
- for (; next_fi; next_fi = get_next_frame (next_fi))
- {
- /* look for saved AVR_FP_REGNUM */
- if (get_frame_saved_regs (next_fi)[AVR_FP_REGNUM] && !fp)
- fp = get_frame_saved_regs (next_fi)[AVR_FP_REGNUM];
- /* look for saved AVR_FP_REGNUM + 1 */
- if (get_frame_saved_regs (next_fi)[AVR_FP_REGNUM + 1] && !fp1)
- fp1 = get_frame_saved_regs (next_fi)[AVR_FP_REGNUM + 1];
- }
- fp_low = (fp ? read_memory_unsigned_integer (avr_make_saddr (fp), 1)
- : read_register (AVR_FP_REGNUM)) & 0xff;
- fp_high =
- (fp1 ? read_memory_unsigned_integer (avr_make_saddr (fp1), 1) :
- read_register (AVR_FP_REGNUM + 1)) & 0xff;
- deprecated_update_frame_base_hack (fi, fp_low | (fp_high << 8));
- }
+ if (readbuf != NULL)
+ {
+ for (i = 0; i < TYPE_LENGTH (valtype); i++)
+ regcache_cooked_read (regcache, lsb_reg + i, readbuf + i);
}
- /* TRoth: Do we want to do this if we are in main? I don't think we should
- since return_pc makes no sense when we are in main. */
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
- if ((get_frame_pc (fi)) && (get_frame_extra_info (fi)->is_main == 0))
- /* We are not in CALL_DUMMY */
- {
- CORE_ADDR addr;
- int i;
- addr = get_frame_base (fi) + get_frame_extra_info (fi)->framesize + 1;
+/* Put here the code to store, into fi->saved_regs, the addresses of
+ the saved registers of frame described by FRAME_INFO. This
+ includes special registers such as pc and fp saved in special ways
+ in the stack frame. sp is even more special: the address we return
+ for it IS the sp for the next frame. */
- /* Return address in stack in different endianness */
+static struct avr_unwind_cache *
+avr_frame_unwind_cache (struct frame_info *this_frame,
+ void **this_prologue_cache)
+{
+ CORE_ADDR start_pc, current_pc;
+ ULONGEST prev_sp;
+ ULONGEST this_base;
+ struct avr_unwind_cache *info;
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int i;
- get_frame_extra_info (fi)->return_pc =
- read_memory_unsigned_integer (avr_make_saddr (addr), 1) << 8;
- get_frame_extra_info (fi)->return_pc |=
- read_memory_unsigned_integer (avr_make_saddr (addr + 1), 1);
+ if (*this_prologue_cache)
+ return *this_prologue_cache;
- /* This return address in words,
- must be converted to the bytes address */
- get_frame_extra_info (fi)->return_pc *= 2;
+ info = FRAME_OBSTACK_ZALLOC (struct avr_unwind_cache);
+ *this_prologue_cache = info;
+ info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
- /* Resolve a pushed registers addresses */
- for (i = 0; i < NUM_REGS; i++)
- {
- if (get_frame_saved_regs (fi)[i])
- get_frame_saved_regs (fi)[i] = addr - get_frame_saved_regs (fi)[i];
- }
- }
-}
-
-/* Restore the machine to the state it had before the current frame was
- created. Usually used either by the "RETURN" command, or by
- call_function_by_hand after the dummy_frame is finished. */
+ info->size = 0;
+ info->prologue_type = AVR_PROLOGUE_NONE;
-static void
-avr_pop_frame (void)
-{
- unsigned regnum;
- CORE_ADDR saddr;
- struct frame_info *frame = get_current_frame ();
+ start_pc = get_frame_func (this_frame);
+ current_pc = get_frame_pc (this_frame);
+ if ((start_pc > 0) && (start_pc <= current_pc))
+ avr_scan_prologue (get_frame_arch (this_frame),
+ start_pc, current_pc, info);
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame),
- get_frame_base (frame),
- get_frame_base (frame)))
+ if ((info->prologue_type != AVR_PROLOGUE_NONE)
+ && (info->prologue_type != AVR_PROLOGUE_MAIN))
{
- generic_pop_dummy_frame ();
- }
+ ULONGEST high_base; /* High byte of FP */
+
+ /* The SP was moved to the FP. This indicates that a new frame
+ was created. Get THIS frame's FP value by unwinding it from
+ the next frame. */
+ this_base = get_frame_register_unsigned (this_frame, AVR_FP_REGNUM);
+ high_base = get_frame_register_unsigned (this_frame, AVR_FP_REGNUM + 1);
+ this_base += (high_base << 8);
+
+ /* The FP points at the last saved register. Adjust the FP back
+ to before the first saved register giving the SP. */
+ prev_sp = this_base + info->size;
+ }
else
{
- /* TRoth: Why only loop over 8 registers? */
+ /* Assume that the FP is this frame's SP but with that pushed
+ stack space added back. */
+ this_base = get_frame_register_unsigned (this_frame, AVR_SP_REGNUM);
+ prev_sp = this_base + info->size;
+ }
- for (regnum = 0; regnum < 8; regnum++)
- {
- /* Don't forget AVR_SP_REGNUM in a frame_saved_regs struct is the
- actual value we want, not the address of the value we want. */
- if (get_frame_saved_regs (frame)[regnum] && regnum != AVR_SP_REGNUM)
- {
- saddr = avr_make_saddr (get_frame_saved_regs (frame)[regnum]);
- write_register (regnum,
- read_memory_unsigned_integer (saddr, 1));
- }
- else if (get_frame_saved_regs (frame)[regnum] && regnum == AVR_SP_REGNUM)
- write_register (regnum, get_frame_base (frame) + 2);
- }
+ /* Add 1 here to adjust for the post-decrement nature of the push
+ instruction.*/
+ info->prev_sp = avr_make_saddr (prev_sp + 1);
+ info->base = avr_make_saddr (this_base);
- /* Don't forget the update the PC too! */
- write_pc (get_frame_extra_info (frame)->return_pc);
- }
- flush_cached_frames ();
-}
+ gdbarch = get_frame_arch (this_frame);
-/* Return the saved PC from this frame. */
+ /* Adjust all the saved registers so that they contain addresses and not
+ offsets. */
+ for (i = 0; i < gdbarch_num_regs (gdbarch) - 1; i++)
+ if (info->saved_regs[i].addr > 0)
+ info->saved_regs[i].addr = info->prev_sp - info->saved_regs[i].addr;
-static CORE_ADDR
-avr_frame_saved_pc (struct frame_info *frame)
-{
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame),
- get_frame_base (frame),
- get_frame_base (frame)))
- return deprecated_read_register_dummy (get_frame_pc (frame),
- get_frame_base (frame),
- AVR_PC_REGNUM);
- else
- return get_frame_extra_info (frame)->return_pc;
+ /* Except for the main and startup code, the return PC is always saved on
+ the stack and is at the base of the frame. */
+
+ if (info->prologue_type != AVR_PROLOGUE_MAIN)
+ info->saved_regs[AVR_PC_REGNUM].addr = info->prev_sp;
+
+ /* The previous frame's SP needed to be computed. Save the computed
+ value. */
+ tdep = gdbarch_tdep (gdbarch);
+ trad_frame_set_value (info->saved_regs, AVR_SP_REGNUM,
+ info->prev_sp - 1 + tdep->call_length);
+
+ return info;
}
static CORE_ADDR
-avr_saved_pc_after_call (struct frame_info *frame)
+avr_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- unsigned char m1, m2;
- unsigned int sp = read_register (AVR_SP_REGNUM);
- m1 = read_memory_unsigned_integer (avr_make_saddr (sp + 1), 1);
- m2 = read_memory_unsigned_integer (avr_make_saddr (sp + 2), 1);
- return (m2 | (m1 << 8)) * 2;
-}
+ ULONGEST pc;
-/* Returns the return address for a dummy. */
+ pc = frame_unwind_register_unsigned (next_frame, AVR_PC_REGNUM);
-static CORE_ADDR
-avr_call_dummy_address (void)
-{
- return entry_point_address ();
+ return avr_make_iaddr (pc);
}
-/* Setup the return address for a dummy frame, as called by
- call_function_by_hand. Only necessary when you are using an empty
- CALL_DUMMY. */
-
static CORE_ADDR
-avr_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+avr_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- unsigned char buf[2];
- int wordsize = 2;
-#if 0
- struct minimal_symbol *msymbol;
- CORE_ADDR mon_brk;
-#endif
+ ULONGEST sp;
- buf[0] = 0;
- buf[1] = 0;
- sp -= wordsize;
- write_memory (sp + 1, buf, 2);
-
-#if 0
- /* FIXME: TRoth/2002-02-18: This should probably be removed since it's a
- left-over from Denis' original patch which used avr-mon for the target
- instead of the generic remote target. */
- if ((strcmp (target_shortname, "avr-mon") == 0)
- && (msymbol = lookup_minimal_symbol ("gdb_break", NULL, NULL)))
- {
- mon_brk = SYMBOL_VALUE_ADDRESS (msymbol);
- store_unsigned_integer (buf, wordsize, mon_brk / 2);
- sp -= wordsize;
- write_memory (sp + 1, buf + 1, 1);
- write_memory (sp + 2, buf, 1);
- }
-#endif
- return sp;
+ sp = frame_unwind_register_unsigned (next_frame, AVR_SP_REGNUM);
+
+ return avr_make_saddr (sp);
}
-static CORE_ADDR
-avr_skip_prologue (CORE_ADDR pc)
+/* Given a GDB frame, determine the address of the calling function's
+ frame. This will be used to create a new GDB frame struct. */
+
+static void
+avr_frame_this_id (struct frame_info *this_frame,
+ void **this_prologue_cache,
+ struct frame_id *this_id)
{
- CORE_ADDR func_addr, func_end;
- struct symtab_and_line sal;
+ struct avr_unwind_cache *info
+ = avr_frame_unwind_cache (this_frame, this_prologue_cache);
+ CORE_ADDR base;
+ CORE_ADDR func;
+ struct frame_id id;
+
+ /* The FUNC is easy. */
+ func = get_frame_func (this_frame);
+
+ /* Hopefully the prologue analysis either correctly determined the
+ frame's base (which is the SP from the previous frame), or set
+ that base to "NULL". */
+ base = info->prev_sp;
+ if (base == 0)
+ return;
+
+ id = frame_id_build (base, func);
+ (*this_id) = id;
+}
- /* See what the symbol table says */
+static struct value *
+avr_frame_prev_register (struct frame_info *this_frame,
+ void **this_prologue_cache, int regnum)
+{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ struct avr_unwind_cache *info
+ = avr_frame_unwind_cache (this_frame, this_prologue_cache);
- if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ if (regnum == AVR_PC_REGNUM || regnum == AVR_PSEUDO_PC_REGNUM)
{
- sal = find_pc_line (func_addr, 0);
-
- /* troth/2002-08-05: For some very simple functions, gcc doesn't
- generate a prologue and the sal.end ends up being the 2-byte ``ret''
- instruction at the end of the function, but func_end ends up being
- the address of the first instruction of the _next_ function. By
- adjusting func_end by 2 bytes, we can catch these functions and not
- return sal.end if it is the ``ret'' instruction. */
-
- if (sal.line != 0 && sal.end < (func_end-2))
- return sal.end;
+ if (trad_frame_addr_p (info->saved_regs, AVR_PC_REGNUM))
+ {
+ /* Reading the return PC from the PC register is slightly
+ abnormal. register_size(AVR_PC_REGNUM) says it is 4 bytes,
+ but in reality, only two bytes (3 in upcoming mega256) are
+ stored on the stack.
+
+ Also, note that the value on the stack is an addr to a word
+ not a byte, so we will need to multiply it by two at some
+ point.
+
+ And to confuse matters even more, the return address stored
+ on the stack is in big endian byte order, even though most
+ everything else about the avr is little endian. Ick! */
+ ULONGEST pc;
+ int i;
+ unsigned char buf[3];
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ read_memory (info->saved_regs[AVR_PC_REGNUM].addr,
+ buf, tdep->call_length);
+
+ /* Extract the PC read from memory as a big-endian. */
+ pc = 0;
+ for (i = 0; i < tdep->call_length; i++)
+ pc = (pc << 8) | buf[i];
+
+ if (regnum == AVR_PC_REGNUM)
+ pc <<= 1;
+
+ return frame_unwind_got_constant (this_frame, regnum, pc);
+ }
+
+ return frame_unwind_got_optimized (this_frame, regnum);
}
-/* Either we didn't find the start of this function (nothing we can do),
- or there's no line info, or the line after the prologue is after
- the end of the function (there probably isn't a prologue). */
-
- return pc;
+ return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
}
+static const struct frame_unwind avr_frame_unwind = {
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ avr_frame_this_id,
+ avr_frame_prev_register,
+ NULL,
+ default_frame_sniffer
+};
+
static CORE_ADDR
-avr_frame_address (struct frame_info *fi)
+avr_frame_base_address (struct frame_info *this_frame, void **this_cache)
{
- return avr_make_saddr (get_frame_base (fi));
+ struct avr_unwind_cache *info
+ = avr_frame_unwind_cache (this_frame, this_cache);
+
+ return info->base;
}
-/* Given a GDB frame, determine the address of the calling function's
- frame. This will be used to create a new GDB frame struct, and
- then DEPRECATED_INIT_EXTRA_FRAME_INFO and DEPRECATED_INIT_FRAME_PC
- will be called for the new frame.
+static const struct frame_base avr_frame_base = {
+ &avr_frame_unwind,
+ avr_frame_base_address,
+ avr_frame_base_address,
+ avr_frame_base_address
+};
- For us, the frame address is its stack pointer value, so we look up
- the function prologue to determine the caller's sp value, and return it. */
+/* Assuming THIS_FRAME is a dummy, return the frame ID of that dummy
+ frame. The frame ID's base needs to match the TOS value saved by
+ save_dummy_frame_tos(), and the PC match the dummy frame's breakpoint. */
-static CORE_ADDR
-avr_frame_chain (struct frame_info *frame)
+static struct frame_id
+avr_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
- if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame),
- get_frame_base (frame),
- get_frame_base (frame)))
- {
- /* initialize the return_pc now */
- get_frame_extra_info (frame)->return_pc
- = deprecated_read_register_dummy (get_frame_pc (frame),
- get_frame_base (frame),
- AVR_PC_REGNUM);
- return get_frame_base (frame);
- }
- return (get_frame_extra_info (frame)->is_main ? 0
- : get_frame_base (frame) + get_frame_extra_info (frame)->framesize + 2 /* ret addr */ );
+ ULONGEST base;
+
+ base = get_frame_register_unsigned (this_frame, AVR_SP_REGNUM);
+ return frame_id_build (avr_make_saddr (base), get_frame_pc (this_frame));
}
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function.
+/* When arguments must be pushed onto the stack, they go on in reverse
+ order. The below implements a FILO (stack) to do this. */
+
+struct stack_item
+{
+ int len;
+ struct stack_item *prev;
+ void *data;
+};
- We store structs through a pointer passed in the first Argument
- register. */
+static struct stack_item *
+push_stack_item (struct stack_item *prev, const bfd_byte *contents, int len)
+{
+ struct stack_item *si;
+ si = xmalloc (sizeof (struct stack_item));
+ si->data = xmalloc (len);
+ si->len = len;
+ si->prev = prev;
+ memcpy (si->data, contents, len);
+ return si;
+}
-static void
-avr_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+static struct stack_item *pop_stack_item (struct stack_item *si);
+static struct stack_item *
+pop_stack_item (struct stack_item *si)
{
- write_register (0, addr);
+ struct stack_item *dead = si;
+ si = si->prev;
+ xfree (dead->data);
+ xfree (dead);
+ return si;
}
/* Setup the function arguments for calling a function in the inferior.
dedicated for passing function arguments. Up to the first 18 arguments
(depending on size) may go into these registers. The rest go on the stack.
- Arguments that are larger than WORDSIZE bytes will be split between two or
- more registers as available, but will NOT be split between a register and
- the stack.
+ All arguments are aligned to start in even-numbered registers (odd-sized
+ arguments, including char, have one free register above them). For example,
+ an int in arg1 and a char in arg2 would be passed as such:
+
+ arg1 -> r25:r24
+ arg2 -> r22
+
+ Arguments that are larger than 2 bytes will be split between two or more
+ registers as available, but will NOT be split between a register and the
+ stack. Arguments that go onto the stack are pushed last arg first (this is
+ similar to the d10v). */
+
+/* NOTE: TRoth/2003-06-17: The rest of this comment is old looks to be
+ inaccurate.
An exceptional case exists for struct arguments (and possibly other
aggregates such as arrays) -- if the size is larger than WORDSIZE bytes but
must allocate space into which the callee will copy the return value. In
this case, a pointer to the return value location is passed into the callee
in register R0, which displaces one of the other arguments passed in via
- registers R0 to R2. */
+ registers R0 to R2. */
static CORE_ADDR
-avr_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
+avr_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
- int stack_alloc, stack_offset;
- int wordsize;
- int argreg;
- int argnum;
- struct type *type;
- CORE_ADDR regval;
- char *val;
- char valbuf[4];
- int len;
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ int i;
+ unsigned char buf[3];
+ int call_length = gdbarch_tdep (gdbarch)->call_length;
+ CORE_ADDR return_pc = avr_convert_iaddr_to_raw (bp_addr);
+ int regnum = AVR_ARGN_REGNUM;
+ struct stack_item *si = NULL;
- wordsize = 1;
-#if 0
- /* Now make sure there's space on the stack */
- for (argnum = 0, stack_alloc = 0; argnum < nargs; argnum++)
- stack_alloc += TYPE_LENGTH (VALUE_TYPE (args[argnum]));
- sp -= stack_alloc; /* make room on stack for args */
- /* we may over-allocate a little here, but that won't hurt anything */
-#endif
- argreg = 25;
- if (struct_return) /* "struct return" pointer takes up one argreg */
+ if (struct_return)
{
- write_register (--argreg, struct_addr);
+ regcache_cooked_write_unsigned
+ (regcache, regnum--, (struct_addr >> 8) & 0xff);
+ regcache_cooked_write_unsigned
+ (regcache, regnum--, struct_addr & 0xff);
+ /* SP being post decremented, we need to reserve one byte so that the
+ return address won't overwrite the result (or vice-versa). */
+ if (sp == struct_addr)
+ sp--;
}
- /* Now load as many as possible of the first arguments into registers, and
- push the rest onto the stack. There are 3N bytes in three registers
- available. Loop thru args from first to last. */
+ for (i = 0; i < nargs; i++)
+ {
+ int last_regnum;
+ int j;
+ struct value *arg = args[i];
+ struct type *type = check_typedef (value_type (arg));
+ const bfd_byte *contents = value_contents (arg);
+ int len = TYPE_LENGTH (type);
+
+ /* Calculate the potential last register needed. */
+ last_regnum = regnum - (len + (len & 1));
+
+ /* If there are registers available, use them. Once we start putting
+ stuff on the stack, all subsequent args go on stack. */
+ if ((si == NULL) && (last_regnum >= 8))
+ {
+ ULONGEST val;
+
+ /* Skip a register for odd length args. */
+ if (len & 1)
+ regnum--;
+
+ val = extract_unsigned_integer (contents, len, byte_order);
+ for (j = 0; j < len; j++)
+ regcache_cooked_write_unsigned
+ (regcache, regnum--, val >> (8 * (len - j - 1)));
+ }
+ /* No registers available, push the args onto the stack. */
+ else
+ {
+ /* From here on, we don't care about regnum. */
+ si = push_stack_item (si, contents, len);
+ }
+ }
- for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+ /* Push args onto the stack. */
+ while (si)
{
- type = VALUE_TYPE (args[argnum]);
- len = TYPE_LENGTH (type);
- val = (char *) VALUE_CONTENTS (args[argnum]);
-
- /* NOTE WELL!!!!! This is not an "else if" clause!!! That's because
- some *&^%$ things get passed on the stack AND in the registers! */
- while (len > 0)
- { /* there's room in registers */
- len -= wordsize;
- regval = extract_unsigned_integer (val + len, wordsize);
- write_register (argreg--, regval);
- }
+ sp -= si->len;
+ /* Add 1 to sp here to account for post decr nature of pushes. */
+ write_memory (sp + 1, si->data, si->len);
+ si = pop_stack_item (si);
}
- return sp;
+
+ /* Set the return address. For the avr, the return address is the BP_ADDR.
+ Need to push the return address onto the stack noting that it needs to be
+ in big-endian order on the stack. */
+ for (i = 1; i <= call_length; i++)
+ {
+ buf[call_length - i] = return_pc & 0xff;
+ return_pc >>= 8;
+ }
+
+ sp -= call_length;
+ /* Use 'sp + 1' since pushes are post decr ops. */
+ write_memory (sp + 1, buf, call_length);
+
+ /* Finally, update the SP register. */
+ regcache_cooked_write_unsigned (regcache, AVR_SP_REGNUM,
+ avr_convert_saddr_to_raw (sp));
+
+ /* Return SP value for the dummy frame, where the return address hasn't been
+ pushed. */
+ return sp + call_length;
}
-/* Not all avr devices support the BREAK insn. Those that don't should treat
- it as a NOP. Thus, it should be ok. Since the avr is currently a remote
- only target, this shouldn't be a problem (I hope). TRoth/2003-05-14 */
+/* Unfortunately dwarf2 register for SP is 32. */
-static const unsigned char *
-avr_breakpoint_from_pc (CORE_ADDR * pcptr, int *lenptr)
+static int
+avr_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
{
- static unsigned char avr_break_insn [] = { 0x98, 0x95 };
- *lenptr = sizeof (avr_break_insn);
- return avr_break_insn;
+ if (reg >= 0 && reg < 32)
+ return reg;
+ if (reg == 32)
+ return AVR_SP_REGNUM;
+
+ warning (_("Unmapped DWARF Register #%d encountered."), reg);
+
+ return -1;
}
-/* Initialize the gdbarch structure for the AVR's. */
+/* Initialize the gdbarch structure for the AVR's. */
static struct gdbarch *
avr_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
- /* FIXME: TRoth/2002-02-18: I have no idea if avr_call_dummy_words[] should
- be bigger or not. Initial testing seems to show that `call my_func()`
- works and backtrace from a breakpoint within the call looks correct.
- Admittedly, I haven't tested with more than a very simple program. */
- static LONGEST avr_call_dummy_words[] = { 0 };
-
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
+ struct gdbarch_list *best_arch;
+ int call_length;
- /* Find a candidate among the list of pre-declared architectures. */
- arches = gdbarch_list_lookup_by_info (arches, &info);
- if (arches != NULL)
- return arches->gdbarch;
-
- /* None found, create a new architecture from the information provided. */
- tdep = XMALLOC (struct gdbarch_tdep);
- gdbarch = gdbarch_alloc (&info, tdep);
-
- /* NOTE: cagney/2002-12-06: This can be deleted when this arch is
- ready to unwind the PC first (see frame.c:get_prev_frame()). */
- set_gdbarch_deprecated_init_frame_pc (gdbarch, init_frame_pc_default);
-
- /* If we ever need to differentiate the device types, do it here. */
+ /* Avr-6 call instructions save 3 bytes. */
switch (info.bfd_arch_info->mach)
{
case bfd_mach_avr1:
case bfd_mach_avr3:
case bfd_mach_avr4:
case bfd_mach_avr5:
+ default:
+ call_length = 2;
break;
+ case bfd_mach_avr6:
+ call_length = 3;
+ break;
+ }
+
+ /* If there is already a candidate, use it. */
+ for (best_arch = gdbarch_list_lookup_by_info (arches, &info);
+ best_arch != NULL;
+ best_arch = gdbarch_list_lookup_by_info (best_arch->next, &info))
+ {
+ if (gdbarch_tdep (best_arch->gdbarch)->call_length == call_length)
+ return best_arch->gdbarch;
}
+ /* None found, create a new architecture from the information provided. */
+ tdep = XMALLOC (struct gdbarch_tdep);
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ tdep->call_length = call_length;
+
+ /* Create a type for PC. We can't use builtin types here, as they may not
+ be defined. */
+ tdep->void_type = arch_type (gdbarch, TYPE_CODE_VOID, 1, "void");
+ tdep->func_void_type = make_function_type (tdep->void_type, NULL);
+ tdep->pc_type = arch_type (gdbarch, TYPE_CODE_PTR, 4, NULL);
+ TYPE_TARGET_TYPE (tdep->pc_type) = tdep->func_void_type;
+ TYPE_UNSIGNED (tdep->pc_type) = 1;
+
set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_int_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
set_gdbarch_ptr_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_addr_bit (gdbarch, 32);
- set_gdbarch_bfd_vma_bit (gdbarch, 32); /* FIXME: TRoth/2002-02-18: Is this needed? */
set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
- set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_little);
- set_gdbarch_double_format (gdbarch, &floatformat_ieee_single_little);
- set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_single_little);
+ set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
+ set_gdbarch_double_format (gdbarch, floatformats_ieee_single);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ieee_single);
set_gdbarch_read_pc (gdbarch, avr_read_pc);
set_gdbarch_write_pc (gdbarch, avr_write_pc);
- set_gdbarch_deprecated_target_read_fp (gdbarch, avr_read_fp);
- set_gdbarch_read_sp (gdbarch, avr_read_sp);
- set_gdbarch_deprecated_dummy_write_sp (gdbarch, avr_write_sp);
set_gdbarch_num_regs (gdbarch, AVR_NUM_REGS);
set_gdbarch_sp_regnum (gdbarch, AVR_SP_REGNUM);
- set_gdbarch_deprecated_fp_regnum (gdbarch, AVR_FP_REGNUM);
set_gdbarch_pc_regnum (gdbarch, AVR_PC_REGNUM);
set_gdbarch_register_name (gdbarch, avr_register_name);
- set_gdbarch_deprecated_register_size (gdbarch, 1);
- set_gdbarch_deprecated_register_bytes (gdbarch, AVR_NUM_REG_BYTES);
- set_gdbarch_deprecated_register_byte (gdbarch, avr_register_byte);
- set_gdbarch_deprecated_register_raw_size (gdbarch, avr_register_raw_size);
- set_gdbarch_deprecated_max_register_raw_size (gdbarch, 4);
- set_gdbarch_deprecated_register_virtual_size (gdbarch, avr_register_virtual_size);
- set_gdbarch_deprecated_max_register_virtual_size (gdbarch, 4);
- set_gdbarch_deprecated_register_virtual_type (gdbarch, avr_register_virtual_type);
+ set_gdbarch_register_type (gdbarch, avr_register_type);
+ set_gdbarch_num_pseudo_regs (gdbarch, AVR_NUM_PSEUDO_REGS);
+ set_gdbarch_pseudo_register_read (gdbarch, avr_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, avr_pseudo_register_write);
+
+ set_gdbarch_return_value (gdbarch, avr_return_value);
set_gdbarch_print_insn (gdbarch, print_insn_avr);
- set_gdbarch_call_dummy_address (gdbarch, avr_call_dummy_address);
- set_gdbarch_deprecated_call_dummy_words (gdbarch, avr_call_dummy_words);
+ set_gdbarch_push_dummy_call (gdbarch, avr_push_dummy_call);
-/* set_gdbarch_believe_pcc_promotion (gdbarch, 1); // TRoth: should this be set? */
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, avr_dwarf_reg_to_regnum);
set_gdbarch_address_to_pointer (gdbarch, avr_address_to_pointer);
set_gdbarch_pointer_to_address (gdbarch, avr_pointer_to_address);
- set_gdbarch_deprecated_push_arguments (gdbarch, avr_push_arguments);
- set_gdbarch_deprecated_push_return_address (gdbarch, avr_push_return_address);
- set_gdbarch_deprecated_pop_frame (gdbarch, avr_pop_frame);
-
- set_gdbarch_use_struct_convention (gdbarch, generic_use_struct_convention);
- set_gdbarch_deprecated_store_struct_return (gdbarch, avr_store_struct_return);
+ set_gdbarch_integer_to_address (gdbarch, avr_integer_to_address);
- set_gdbarch_deprecated_frame_init_saved_regs (gdbarch, avr_scan_prologue);
- set_gdbarch_deprecated_init_extra_frame_info (gdbarch, avr_init_extra_frame_info);
set_gdbarch_skip_prologue (gdbarch, avr_skip_prologue);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
- set_gdbarch_decr_pc_after_break (gdbarch, 0);
set_gdbarch_breakpoint_from_pc (gdbarch, avr_breakpoint_from_pc);
- set_gdbarch_function_start_offset (gdbarch, 0);
- set_gdbarch_remote_translate_xfer_address (gdbarch,
- avr_remote_translate_xfer_address);
- set_gdbarch_frame_args_skip (gdbarch, 0);
- set_gdbarch_frameless_function_invocation (gdbarch, frameless_look_for_prologue); /* ??? */
- set_gdbarch_deprecated_frame_chain (gdbarch, avr_frame_chain);
- set_gdbarch_deprecated_frame_saved_pc (gdbarch, avr_frame_saved_pc);
- set_gdbarch_frame_args_address (gdbarch, avr_frame_address);
- set_gdbarch_frame_locals_address (gdbarch, avr_frame_address);
- set_gdbarch_deprecated_saved_pc_after_call (gdbarch, avr_saved_pc_after_call);
+ frame_unwind_append_unwinder (gdbarch, &avr_frame_unwind);
+ frame_base_set_default (gdbarch, &avr_frame_base);
+
+ set_gdbarch_dummy_id (gdbarch, avr_dummy_id);
+
+ set_gdbarch_unwind_pc (gdbarch, avr_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, avr_unwind_sp);
return gdbarch;
}
/* Send a query request to the avr remote target asking for values of the io
- registers. If args parameter is not NULL, then the user has requested info
+ registers. If args parameter is not NULL, then the user has requested info
on a specific io register [This still needs implemented and is ignored for
- now]. The query string should be one of these forms:
+ now]. The query string should be one of these forms:
"Ravr.io_reg" -> reply is "NN" number of io registers
"Ravr.io_reg:addr,len" where addr is first register and len is number of
- registers to be read. The reply should be "<NAME>,VV;" for each io register
+ registers to be read. The reply should be "<NAME>,VV;" for each io register
where, <NAME> is a string, and VV is the hex value of the register.
- All io registers are 8-bit. */
+ All io registers are 8-bit. */
static void
avr_io_reg_read_command (char *args, int from_tty)
{
- int bufsiz = 0;
- char buf[400];
+ LONGEST bufsiz = 0;
+ gdb_byte *buf;
char query[400];
char *p;
unsigned int nreg = 0;
unsigned int val;
int i, j, k, step;
-/* fprintf_unfiltered (gdb_stderr, "DEBUG: avr_io_reg_read_command (\"%s\", %d)\n", */
-/* args, from_tty); */
+ /* Find out how many io registers the target has. */
+ bufsiz = target_read_alloc (¤t_target, TARGET_OBJECT_AVR,
+ "avr.io_reg", &buf);
- if (!current_target.to_query)
+ if (bufsiz <= 0)
{
fprintf_unfiltered (gdb_stderr,
- "ERR: info io_registers NOT supported by current target\n");
- return;
- }
-
- /* Just get the maximum buffer size. */
- target_query ((int) 'R', 0, 0, &bufsiz);
- if (bufsiz > sizeof (buf))
- bufsiz = sizeof (buf);
-
- /* Find out how many io registers the target has. */
- strcpy (query, "avr.io_reg");
- target_query ((int) 'R', query, buf, &bufsiz);
-
- if (strncmp (buf, "", bufsiz) == 0)
- {
- fprintf_unfiltered (gdb_stderr,
- "info io_registers NOT supported by target\n");
+ _("ERR: info io_registers NOT supported "
+ "by current target\n"));
return;
}
if (sscanf (buf, "%x", &nreg) != 1)
{
fprintf_unfiltered (gdb_stderr,
- "Error fetching number of io registers\n");
+ _("Error fetching number of io registers\n"));
+ xfree (buf);
return;
}
+ xfree (buf);
+
reinitialize_more_filter ();
- printf_unfiltered ("Target has %u io registers:\n\n", nreg);
+ printf_unfiltered (_("Target has %u io registers:\n\n"), nreg);
/* only fetch up to 8 registers at a time to keep the buffer small */
step = 8;
j = nreg - i; /* last block is less than 8 registers */
snprintf (query, sizeof (query) - 1, "avr.io_reg:%x,%x", i, j);
- target_query ((int) 'R', query, buf, &bufsiz);
+ bufsiz = target_read_alloc (¤t_target, TARGET_OBJECT_AVR,
+ query, &buf);
p = buf;
for (k = i; k < (i + j); k++)
break;
}
}
+
+ xfree (buf);
}
}
/* Add a new command to allow the user to query the avr remote target for
the values of the io space registers in a saner way than just using
- `x/NNNb ADDR`. */
+ `x/NNNb ADDR`. */
/* FIXME: TRoth/2002-02-18: This should probably be changed to 'info avr
- io_registers' to signify it is not available on other platforms. */
+ io_registers' to signify it is not available on other platforms. */
add_cmd ("io_registers", class_info, avr_io_reg_read_command,
- "query remote avr target for io space register values", &infolist);
+ _("query remote avr target for io space register values"),
+ &infolist);
}