void _initialize_blockframe (void);
-/* Test whether PC is in the range of addresses that corresponds to
- the "main" function. */
-
-int
-inside_main_func (CORE_ADDR pc)
-{
- struct minimal_symbol *msymbol;
-
- if (symfile_objfile == 0)
- return 0;
-
- msymbol = lookup_minimal_symbol (main_name (), NULL, symfile_objfile);
-
- /* If the address range hasn't been set up at symbol reading time,
- set it up now. */
-
- if (msymbol != NULL
- && symfile_objfile->ei.main_func_lowpc == INVALID_ENTRY_LOWPC
- && symfile_objfile->ei.main_func_highpc == INVALID_ENTRY_HIGHPC)
- {
- /* brobecker/2003-10-10: We used to rely on lookup_symbol() to
- search the symbol associated to the "main" function.
- Unfortunately, lookup_symbol() uses the current-language
- la_lookup_symbol_nonlocal function to do the global symbol
- search. Depending on the language, this can introduce
- certain side-effects, because certain languages, for instance
- Ada, may find more than one match. Therefore we prefer to
- search the "main" function symbol using its address rather
- than its name. */
- struct symbol *mainsym =
- find_pc_function (SYMBOL_VALUE_ADDRESS (msymbol));
-
- if (mainsym && SYMBOL_CLASS (mainsym) == LOC_BLOCK)
- {
- symfile_objfile->ei.main_func_lowpc =
- BLOCK_START (SYMBOL_BLOCK_VALUE (mainsym));
- symfile_objfile->ei.main_func_highpc =
- BLOCK_END (SYMBOL_BLOCK_VALUE (mainsym));
- }
- }
-
- /* Not in the normal symbol tables, see if "main" is in the partial
- symbol table. If it's not, then give up. */
- if (msymbol != NULL && MSYMBOL_TYPE (msymbol) == mst_text)
- {
- CORE_ADDR maddr = SYMBOL_VALUE_ADDRESS (msymbol);
- asection *msect = SYMBOL_BFD_SECTION (msymbol);
- struct obj_section *osect = find_pc_sect_section (maddr, msect);
-
- if (osect != NULL)
- {
- int i;
-
- /* Step over other symbols at this same address, and symbols
- in other sections, to find the next symbol in this
- section with a different address. */
- for (i = 1; SYMBOL_LINKAGE_NAME (msymbol + i) != NULL; i++)
- {
- if (SYMBOL_VALUE_ADDRESS (msymbol + i) != maddr
- && SYMBOL_BFD_SECTION (msymbol + i) == msect)
- break;
- }
-
- symfile_objfile->ei.main_func_lowpc = maddr;
-
- /* Use the lesser of the next minimal symbol in the same
- section, or the end of the section, as the end of the
- function. */
- if (SYMBOL_LINKAGE_NAME (msymbol + i) != NULL
- && SYMBOL_VALUE_ADDRESS (msymbol + i) < osect->endaddr)
- symfile_objfile->ei.main_func_highpc =
- SYMBOL_VALUE_ADDRESS (msymbol + i);
- else
- /* We got the start address from the last msymbol in the
- objfile. So the end address is the end of the
- section. */
- symfile_objfile->ei.main_func_highpc = osect->endaddr;
- }
- }
-
- return (symfile_objfile->ei.main_func_lowpc <= pc
- && symfile_objfile->ei.main_func_highpc > pc);
-}
-
-/* Test whether THIS_FRAME is inside the process entry point function. */
-
-int
-inside_entry_func (struct frame_info *this_frame)
-{
- return (get_frame_func (this_frame) == entry_point_address ());
-}
-
-/* Similar to inside_entry_func, but accomodating legacy frame code. */
-
-static int
-legacy_inside_entry_func (CORE_ADDR pc)
-{
- if (symfile_objfile == 0)
- return 0;
-
- if (CALL_DUMMY_LOCATION == AT_ENTRY_POINT)
- {
- /* Do not stop backtracing if the program counter is in the call
- dummy at the entry point. */
- /* FIXME: This won't always work with zeros for the last two
- arguments. */
- if (DEPRECATED_PC_IN_CALL_DUMMY (pc, 0, 0))
- return 0;
- }
-
- return (symfile_objfile->ei.entry_func_lowpc <= pc
- && symfile_objfile->ei.entry_func_highpc > pc);
-}
-
-/* Return nonzero if the function for this frame lacks a prologue.
- Many machines can define DEPRECATED_FRAMELESS_FUNCTION_INVOCATION
- to just call this function. */
-
-int
-legacy_frameless_look_for_prologue (struct frame_info *frame)
-{
- CORE_ADDR func_start;
-
- func_start = get_frame_func (frame);
- if (func_start)
- {
- func_start += FUNCTION_START_OFFSET;
- /* NOTE: cagney/2004-02-09: Eliminated per-architecture
- PROLOGUE_FRAMELESS_P call as architectures with custom
- implementations had all been deleted. Eventually even this
- function can go - GDB no longer tries to differentiate
- between framed, frameless and stackless functions. They are
- all now considered equally evil :-^. */
- /* If skipping the prologue ends up skips nothing, there must be
- no prologue and hence no code creating a frame. There for
- the function is "frameless" :-/. */
- return func_start == SKIP_PROLOGUE (func_start);
- }
- else if (get_frame_pc (frame) == 0)
- /* A frame with a zero PC is usually created by dereferencing a
- NULL function pointer, normally causing an immediate core dump
- of the inferior. Mark function as frameless, as the inferior
- has no chance of setting up a stack frame. */
- return 1;
- else
- /* If we can't find the start of the function, we don't really
- know whether the function is frameless, but we should be able
- to get a reasonable (i.e. best we can do under the
- circumstances) backtrace by saying that it isn't. */
- return 0;
-}
-
/* Return the innermost lexical block in execution
in a specified stack frame. The frame address is assumed valid.
&& section == cache_pc_function_section)
goto return_cached_value;
- /* If sigtramp is in the u area, it counts as a function (especially
- important for step_1). */
- /* NOTE: cagney/2004-03-16: Determining if the PC is in a signal
- trampoline typically depends on the detailed analysis of dynamic
- information obtained from the inferior yet this function is
- expected to work using static information obtained from the
- symbol table. */
- if (DEPRECATED_SIGTRAMP_START_P ()
- && DEPRECATED_PC_IN_SIGTRAMP (mapped_pc, (char *) NULL))
- {
- cache_pc_function_low = DEPRECATED_SIGTRAMP_START (mapped_pc);
- cache_pc_function_high = DEPRECATED_SIGTRAMP_END (mapped_pc);
- cache_pc_function_name = "<sigtramp>";
- cache_pc_function_section = section;
- goto return_cached_value;
- }
-
msymbol = lookup_minimal_symbol_by_pc_section (mapped_pc, section);
pst = find_pc_sect_psymtab (mapped_pc, section);
if (pst)
return frame;
}
}
-
-/* Are we in a call dummy? The code below which allows DECR_PC_AFTER_BREAK
- below is for infrun.c, which may give the macro a pc without that
- subtracted out. */
-
-/* Is the PC in a call dummy? SP and FRAME_ADDRESS are the bottom and
- top of the stack frame which we are checking, where "bottom" and
- "top" refer to some section of memory which contains the code for
- the call dummy. Calls to this macro assume that the contents of
- SP_REGNUM and DEPRECATED_FP_REGNUM (or the saved values thereof),
- respectively, are the things to pass.
-
- This won't work on the 29k, where SP_REGNUM and
- DEPRECATED_FP_REGNUM don't have that meaning, but the 29k doesn't
- use ON_STACK. This could be fixed by generalizing this scheme,
- perhaps by passing in a frame and adding a few fields, at least on
- machines which need them for DEPRECATED_PC_IN_CALL_DUMMY.
-
- Something simpler, like checking for the stack segment, doesn't work,
- since various programs (threads implementations, gcc nested function
- stubs, etc) may either allocate stack frames in another segment, or
- allocate other kinds of code on the stack. */
-
-int
-deprecated_pc_in_call_dummy_on_stack (CORE_ADDR pc, CORE_ADDR sp,
- CORE_ADDR frame_address)
-{
- return (INNER_THAN ((sp), (pc))
- && (frame_address != 0)
- && INNER_THAN ((pc), (frame_address)));
-}
-
-/* Returns true for a user frame or a call_function_by_hand dummy
- frame, and false for the CRT0 start-up frame. Purpose is to
- terminate backtrace. */
-
-int
-legacy_frame_chain_valid (CORE_ADDR fp, struct frame_info *fi)
-{
- /* Don't prune CALL_DUMMY frames. */
- if (DEPRECATED_USE_GENERIC_DUMMY_FRAMES
- && DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fi), 0, 0))
- return 1;
-
- /* If the new frame pointer is zero, then it isn't valid. */
- if (fp == 0)
- return 0;
-
- /* If the new frame would be inside (younger than) the previous frame,
- then it isn't valid. */
- if (INNER_THAN (fp, get_frame_base (fi)))
- return 0;
-
- /* If the architecture has a custom DEPRECATED_FRAME_CHAIN_VALID,
- call it now. */
- if (DEPRECATED_FRAME_CHAIN_VALID_P ())
- return DEPRECATED_FRAME_CHAIN_VALID (fp, fi);
-
- /* If we're already inside the entry function for the main objfile, then it
- isn't valid. */
- if (legacy_inside_entry_func (get_frame_pc (fi)))
- return 0;
-
- return 1;
-}