/* Get info from stack frames;
convert between frames, blocks, functions and pc values.
- Copyright (C) 1986, 1987, 1988, 1989 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1988, 1989, 1991 Free Software Foundation, Inc.
This file is part of GDB.
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-#include <stdio.h>
#include "defs.h"
-#include "param.h"
#include "symtab.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
#include "frame.h"
#include "gdbcore.h"
#include "value.h" /* for read_register */
#include "target.h" /* for target_has_stack */
+#include "inferior.h" /* for read_pc */
-/* Required by INIT_EXTRA_FRAME_INFO on 88k. */
-#include <setjmp.h>
-#include <obstack.h>
-
-CORE_ADDR read_pc (); /* In infcmd.c */
-
-/* Start and end of object file containing the entry point.
- STARTUP_FILE_END is the first address of the next file.
- This file is assumed to be a startup file
- and frames with pc's inside it
- are treated as nonexistent.
-
- Setting these variables is necessary so that backtraces do not fly off
- the bottom of the stack. */
-CORE_ADDR startup_file_start;
-CORE_ADDR startup_file_end;
-
-/* Is ADDR outside the startup file? Note that if your machine
+/* Is ADDR inside the startup file? Note that if your machine
has a way to detect the bottom of the stack, there is no need
to call this function from FRAME_CHAIN_VALID; the reason for
doing so is that some machines have no way of detecting bottom
- of stack. */
+ of stack.
+
+ A PC of zero is always considered to be the bottom of the stack. */
+
int
-outside_startup_file (addr)
+inside_entry_file (addr)
CORE_ADDR addr;
{
- return !(addr >= startup_file_start && addr < startup_file_end);
+ if (addr == 0)
+ return 1;
+ if (symfile_objfile == 0)
+ return 0;
+#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
+ /* Do not stop backtracing if the pc is in the call dummy
+ at the entry point. */
+ if (PC_IN_CALL_DUMMY (addr, 0, 0))
+ return 0;
+#endif
+ return (addr >= symfile_objfile -> ei.entry_file_lowpc &&
+ addr < symfile_objfile -> ei.entry_file_highpc);
+}
+
+/* Test a specified PC value to see if it is in the range of addresses
+ that correspond to the main() function. See comments above for why
+ we might want to do this.
+
+ Typically called from FRAME_CHAIN_VALID.
+
+ A PC of zero is always considered to be the bottom of the stack. */
+
+int
+inside_main_func (pc)
+CORE_ADDR pc;
+{
+ if (pc == 0)
+ return 1;
+ if (symfile_objfile == 0)
+ return 0;
+ return (symfile_objfile -> ei.main_func_lowpc <= pc &&
+ symfile_objfile -> ei.main_func_highpc > pc);
+}
+
+/* Test a specified PC value to see if it is in the range of addresses
+ that correspond to the process entry point function. See comments
+ in objfiles.h for why we might want to do this.
+
+ Typically called from FRAME_CHAIN_VALID.
+
+ A PC of zero is always considered to be the bottom of the stack. */
+
+int
+inside_entry_func (pc)
+CORE_ADDR pc;
+{
+ if (pc == 0)
+ return 1;
+ if (symfile_objfile == 0)
+ return 0;
+#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
+ /* Do not stop backtracing if the pc is in the call dummy
+ at the entry point. */
+ if (PC_IN_CALL_DUMMY (pc, 0, 0))
+ return 0;
+#endif
+ return (symfile_objfile -> ei.entry_func_lowpc <= pc &&
+ symfile_objfile -> ei.entry_func_highpc > pc);
}
/* Address of innermost stack frame (contents of FP register) */
CORE_ADDR pc;
{
struct frame_info *fci; /* Same type as FRAME */
+ char *name;
fci = (struct frame_info *)
obstack_alloc (&frame_cache_obstack,
fci->next = (struct frame_info *) 0;
fci->prev = (struct frame_info *) 0;
fci->frame = addr;
- fci->next_frame = 0; /* Since arbitrary */
fci->pc = pc;
+ find_pc_partial_function (pc, &name, (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ fci->signal_handler_caller = IN_SIGTRAMP (fci->pc, name);
#ifdef INIT_EXTRA_FRAME_INFO
- INIT_EXTRA_FRAME_INFO (fci);
+ INIT_EXTRA_FRAME_INFO (0, fci);
#endif
return fci;
void
reinit_frame_cache ()
{
- FRAME fr = current_frame;
flush_cached_frames ();
- if (fr)
- set_current_frame ( create_new_frame (read_register (FP_REGNUM),
- read_pc ()));
+ if (target_has_stack)
+ {
+ set_current_frame (create_new_frame (read_fp (), read_pc ()));
+ select_frame (get_current_frame (), 0);
+ }
+ else
+ {
+ set_current_frame (0);
+ select_frame ((FRAME) 0, -1);
+ }
}
/* Return a structure containing various interesting information
frame_info for the frame, and FRAMELESS should be set to nonzero
if it represents a frameless function invocation. */
-/* Return nonzero if the function for this frame has a prologue. Many
+/* Return nonzero if the function for this frame lacks a prologue. Many
machines can define FRAMELESS_FUNCTION_INVOCATION to just call this
function. */
return 0;
}
+/* Default a few macros that people seldom redefine. */
+
#if !defined (INIT_FRAME_PC)
#define INIT_FRAME_PC(fromleaf, prev) \
prev->pc = (fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \
prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
#endif
+#ifndef FRAME_CHAIN_COMBINE
+#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
+#endif
+
/* Return a structure containing various interesting information
about the frame that called NEXT_FRAME. Returns NULL
if there is no such frame. */
get_prev_frame_info (next_frame)
FRAME next_frame;
{
- FRAME_ADDR address;
+ FRAME_ADDR address = 0;
struct frame_info *prev;
int fromleaf = 0;
+ char *name;
/* If the requested entry is in the cache, return it.
Otherwise, figure out what the address should be for the entry
return 0;
address = FRAME_CHAIN_COMBINE (address, next_frame);
}
+ if (address == 0)
+ return 0;
prev = (struct frame_info *)
obstack_alloc (&frame_cache_obstack,
prev->next = next_frame;
prev->prev = (struct frame_info *) 0;
prev->frame = address;
- prev->next_frame = prev->next ? prev->next->frame : 0;
+ prev->signal_handler_caller = 0;
+
+/* This change should not be needed, FIXME! We should
+ determine whether any targets *need* INIT_FRAME_PC to happen
+ after INIT_EXTRA_FRAME_INFO and come up with a simple way to
+ express what goes on here.
+
+ INIT_EXTRA_FRAME_INFO is called from two places: create_new_frame
+ (where the PC is already set up) and here (where it isn't).
+ INIT_FRAME_PC is only called from here, always after
+ INIT_EXTRA_FRAME_INFO.
+
+ The catch is the MIPS, where INIT_EXTRA_FRAME_INFO requires the PC
+ value (which hasn't been set yet). Some other machines appear to
+ require INIT_EXTRA_FRAME_INFO before they can do INIT_FRAME_PC. Phoo.
+
+ We shouldn't need INIT_FRAME_PC_FIRST to add more complication to
+ an already overcomplicated part of GDB. gnu@cygnus.com, 15Sep92.
+
+ To answer the question, yes the sparc needs INIT_FRAME_PC after
+ INIT_EXTRA_FRAME_INFO. Suggested scheme:
+
+ SETUP_INNERMOST_FRAME()
+ Default version is just create_new_frame (read_fp ()),
+ read_pc ()). Machines with extra frame info would do that (or the
+ local equivalent) and then set the extra fields.
+ SETUP_ARBITRARY_FRAME(argc, argv)
+ Only change here is that create_new_frame would no longer init extra
+ frame info; SETUP_ARBITRARY_FRAME would have to do that.
+ INIT_PREV_FRAME(fromleaf, prev)
+ Replace INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC.
+ std_frame_pc(fromleaf, prev)
+ This is the default setting for INIT_PREV_FRAME. It just does what
+ the default INIT_FRAME_PC does. Some machines will call it from
+ INIT_PREV_FRAME (either at the beginning, the end, or in the middle).
+ Some machines won't use it.
+ kingdon@cygnus.com, 13Apr93. */
+
+#ifdef INIT_FRAME_PC_FIRST
+ INIT_FRAME_PC_FIRST (fromleaf, prev);
+#endif
#ifdef INIT_EXTRA_FRAME_INFO
- INIT_EXTRA_FRAME_INFO(prev);
+ INIT_EXTRA_FRAME_INFO(fromleaf, prev);
#endif
/* This entry is in the frame queue now, which is good since
FRAME_SAVED_PC may use that queue to figure out it's value
- (see m-sparc.h). We want the pc saved in the inferior frame. */
+ (see tm-sparc.h). We want the pc saved in the inferior frame. */
INIT_FRAME_PC(fromleaf, prev);
+ find_pc_partial_function (prev->pc, &name,
+ (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ if (IN_SIGTRAMP (prev->pc, name))
+ prev->signal_handler_caller = 1;
+
return prev;
}
fi = get_frame_info (frame);
pc = fi->pc;
- if (fi->next_frame != 0)
+ if (fi->next != 0)
/* We are not in the innermost frame. We need to subtract one to
get the correct block, in case the call instruction was the
last instruction of the block. If there are any machines on
get_pc_function_start (pc)
CORE_ADDR pc;
{
- register struct block *bl = block_for_pc (pc);
+ register struct block *bl;
register struct symbol *symbol;
- if (bl == 0 || (symbol = block_function (bl)) == 0)
+ register struct minimal_symbol *msymbol;
+ CORE_ADDR fstart;
+
+ if ((bl = block_for_pc (pc)) != NULL &&
+ (symbol = block_function (bl)) != NULL)
{
- register int misc_index = find_pc_misc_function (pc);
- if (misc_index >= 0)
- return misc_function_vector[misc_index].address;
- return 0;
+ bl = SYMBOL_BLOCK_VALUE (symbol);
+ fstart = BLOCK_START (bl);
+ }
+ else if ((msymbol = lookup_minimal_symbol_by_pc (pc)) != NULL)
+ {
+ fstart = SYMBOL_VALUE_ADDRESS (msymbol);
}
- bl = SYMBOL_BLOCK_VALUE (symbol);
- return BLOCK_START (bl);
+ else
+ {
+ fstart = 0;
+ }
+ return (fstart);
}
/* Return the symbol for the function executing in frame FRAME. */
cache_pc_function_name = (char *)0;
}
-/* Finds the "function" (text symbol) that is smaller than PC
- but greatest of all of the potential text symbols. Sets
- *NAME and/or *ADDRESS conditionally if that pointer is non-zero.
- Returns 0 if it couldn't find anything, 1 if it did. On a zero
- return, *NAME and *ADDRESS are always set to zero. On a 1 return,
- *NAME and *ADDRESS contain real information. */
+/* Finds the "function" (text symbol) that is smaller than PC but
+ greatest of all of the potential text symbols. Sets *NAME and/or
+ *ADDRESS conditionally if that pointer is non-null. If ENDADDR is
+ non-null, then set *ENDADDR to be the end of the function
+ (exclusive), but passing ENDADDR as non-null means that the
+ function might cause symbols to be read. This function either
+ succeeds or fails (not halfway succeeds). If it succeeds, it sets
+ *NAME, *ADDRESS, and *ENDADDR to real information and returns 1.
+ If it fails, it sets *NAME, *ADDRESS, and *ENDADDR to zero
+ and returns 0. */
int
-find_pc_partial_function (pc, name, address)
+find_pc_partial_function (pc, name, address, endaddr)
CORE_ADDR pc;
char **name;
CORE_ADDR *address;
+ CORE_ADDR *endaddr;
{
struct partial_symtab *pst;
struct symbol *f;
- int miscfunc;
+ struct minimal_symbol *msymbol;
struct partial_symbol *psb;
if (pc >= cache_pc_function_low && pc < cache_pc_function_high)
+ goto return_cached_value;
+
+ /* If sigtramp is in the u area, it counts as a function (especially
+ important for step_1). */
+#if defined SIGTRAMP_START
+ if (IN_SIGTRAMP (pc, (char *)NULL))
{
- if (address)
- *address = cache_pc_function_low;
- if (name)
- *name = cache_pc_function_name;
- return 1;
+ cache_pc_function_low = SIGTRAMP_START;
+ cache_pc_function_high = SIGTRAMP_END;
+ cache_pc_function_name = "<sigtramp>";
+
+ goto return_cached_value;
}
+#endif
+ msymbol = lookup_minimal_symbol_by_pc (pc);
pst = find_pc_psymtab (pc);
if (pst)
{
+ /* Need to read the symbols to get a good value for the end address. */
+ if (endaddr != NULL && !pst->readin)
+ PSYMTAB_TO_SYMTAB (pst);
+
if (pst->readin)
{
- /* The information we want has already been read in.
- We can go to the already readin symbols and we'll get
- the best possible answer. */
+ /* Checking whether the msymbol has a larger value is for the
+ "pathological" case mentioned in print_frame_info. */
f = find_pc_function (pc);
- if (!f)
+ if (f != NULL
+ && (msymbol == NULL
+ || (BLOCK_START (SYMBOL_BLOCK_VALUE (f))
+ >= SYMBOL_VALUE_ADDRESS (msymbol))))
{
- return_error:
- /* No available symbol. */
- if (name != 0)
- *name = 0;
- if (address != 0)
- *address = 0;
- return 0;
+ cache_pc_function_low = BLOCK_START (SYMBOL_BLOCK_VALUE (f));
+ cache_pc_function_high = BLOCK_END (SYMBOL_BLOCK_VALUE (f));
+ cache_pc_function_name = SYMBOL_NAME (f);
+ goto return_cached_value;
}
-
- cache_pc_function_low = BLOCK_START (SYMBOL_BLOCK_VALUE (f));
- cache_pc_function_high = BLOCK_END (SYMBOL_BLOCK_VALUE (f));
- cache_pc_function_name = SYMBOL_NAME (f);
- if (name)
- *name = cache_pc_function_name;
- if (address)
- *address = cache_pc_function_low;
- return 1;
}
-
- /* Get the information from a combination of the pst
- (static symbols), and the misc function vector (extern
- symbols). */
- miscfunc = find_pc_misc_function (pc);
- psb = find_pc_psymbol (pst, pc);
-
- if (!psb && miscfunc == -1)
- {
- goto return_error;
- }
- if (psb
- && (miscfunc == -1
- || (SYMBOL_VALUE_ADDRESS (psb)
- >= misc_function_vector[miscfunc].address)))
+ else
{
- /* This case isn't being cached currently. */
- if (address)
- *address = SYMBOL_VALUE_ADDRESS (psb);
- if (name)
- *name = SYMBOL_NAME (psb);
- return 1;
+ /* Now that static symbols go in the minimal symbol table, perhaps
+ we could just ignore the partial symbols. But at least for now
+ we use the partial or minimal symbol, whichever is larger. */
+ psb = find_pc_psymbol (pst, pc);
+
+ if (psb
+ && (msymbol == NULL ||
+ (SYMBOL_VALUE_ADDRESS (psb)
+ >= SYMBOL_VALUE_ADDRESS (msymbol))))
+ {
+ /* This case isn't being cached currently. */
+ if (address)
+ *address = SYMBOL_VALUE_ADDRESS (psb);
+ if (name)
+ *name = SYMBOL_NAME (psb);
+ /* endaddr non-NULL can't happen here. */
+ return 1;
+ }
}
}
- else
- /* Must be in the misc function stuff. */
+
+ /* Must be in the minimal symbol table. */
+ if (msymbol == NULL)
{
- miscfunc = find_pc_misc_function (pc);
- if (miscfunc == -1)
- goto return_error;
+ /* No available symbol. */
+ if (name != NULL)
+ *name = 0;
+ if (address != NULL)
+ *address = 0;
+ if (endaddr != NULL)
+ *endaddr = 0;
+ return 0;
}
- {
- if (misc_function_vector[miscfunc].type == mf_text)
- cache_pc_function_low = misc_function_vector[miscfunc].address;
- else
- /* It is a transfer table for Sun shared libraries. */
- cache_pc_function_low = pc - FUNCTION_START_OFFSET;
- }
- cache_pc_function_name = misc_function_vector[miscfunc].name;
- if (miscfunc < misc_function_count /* && FIXME mf_text again? */ )
- cache_pc_function_high = misc_function_vector[miscfunc+1].address;
+ /* I believe the purpose of this check is to make sure that anything
+ beyond the end of the text segment does not appear as part of the
+ last function of the text segment. It assumes that there is something
+ other than a mst_text symbol after the text segment. It is broken in
+ various cases, so anything relying on this behavior (there might be
+ some places) should be using find_pc_section or some such instead. */
+ if (msymbol -> type == mst_text)
+ cache_pc_function_low = SYMBOL_VALUE_ADDRESS (msymbol);
+ else
+ /* It is a transfer table for Sun shared libraries. */
+ cache_pc_function_low = pc - FUNCTION_START_OFFSET;
+ cache_pc_function_name = SYMBOL_NAME (msymbol);
+
+ if (SYMBOL_NAME (msymbol + 1) != NULL)
+ /* This might be part of a different segment, which might be a bad
+ idea. Perhaps we should be using the smaller of this address or the
+ endaddr from find_pc_section. */
+ cache_pc_function_high = SYMBOL_VALUE_ADDRESS (msymbol + 1);
else
- cache_pc_function_high = cache_pc_function_low + 1;
+ {
+ /* We got the start address from the last msymbol in the objfile.
+ So the end address is the end of the section. */
+ struct obj_section *sec;
+
+ sec = find_pc_section (pc);
+ if (sec == NULL)
+ {
+ /* Don't know if this can happen but if it does, then just say
+ that the function is 1 byte long. */
+ cache_pc_function_high = cache_pc_function_low + 1;
+ }
+ else
+ cache_pc_function_high = sec->endaddr;
+ }
+
+ return_cached_value:
if (address)
*address = cache_pc_function_low;
if (name)
*name = cache_pc_function_name;
+ if (endaddr)
+ *endaddr = cache_pc_function_high;
return 1;
}
-/* Find the misc function whose address is the largest
- while being less than PC. Return its index in misc_function_vector.
- Returns -1 if PC is not in suitable range. */
-
-int
-find_pc_misc_function (pc)
- register CORE_ADDR pc;
-{
- register int lo = 0;
- register int hi = misc_function_count-1;
- register int new;
-
- /* Note that the last thing in the vector is always _etext. */
- /* Actually, "end", now that non-functions
- go on the misc_function_vector. */
-
- /* Above statement is not *always* true - fix for case where there are */
- /* no misc functions at all (ie no symbol table has been read). */
- if (hi < 0) return -1; /* no misc functions recorded */
-
- /* trivial reject range test */
- if (pc < misc_function_vector[0].address ||
- pc > misc_function_vector[hi].address)
- return -1;
-
- /* Note that the following search will not return hi if
- pc == misc_function_vector[hi].address. If "end" points to the
- first unused location, this is correct and the above test
- simply needs to be changed to
- "pc >= misc_function_vector[hi].address". */
- do {
- new = (lo + hi) >> 1;
- if (misc_function_vector[new].address == pc)
- return new; /* an exact match */
- else if (misc_function_vector[new].address > pc)
- hi = new;
- else
- lo = new;
- } while (hi-lo != 1);
-
- /* if here, we had no exact match, so return the lower choice */
- return lo;
-}
-
-/* Return the innermost stack frame executing inside of the specified block,
- or zero if there is no such frame. */
+/* Return the innermost stack frame executing inside of BLOCK,
+ or NULL if there is no such frame. If BLOCK is NULL, just return NULL. */
FRAME
block_innermost_frame (block)
{
struct frame_info *fi;
register FRAME frame;
- register CORE_ADDR start = BLOCK_START (block);
- register CORE_ADDR end = BLOCK_END (block);
+ register CORE_ADDR start;
+ register CORE_ADDR end;
+
+ if (block == NULL)
+ return NULL;
+
+ start = BLOCK_START (block);
+ end = BLOCK_END (block);
frame = 0;
while (1)
}
}
+#ifdef SIGCONTEXT_PC_OFFSET
+/* Get saved user PC for sigtramp from sigcontext for BSD style sigtramp. */
+
+CORE_ADDR
+sigtramp_saved_pc (frame)
+ FRAME frame;
+{
+ CORE_ADDR sigcontext_addr;
+ char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+ int ptrbytes = TARGET_PTR_BIT / TARGET_CHAR_BIT;
+ int sigcontext_offs = (2 * TARGET_INT_BIT) / TARGET_CHAR_BIT;
+
+ /* Get sigcontext address, it is the third parameter on the stack. */
+ if (frame->next)
+ sigcontext_addr = read_memory_integer (FRAME_ARGS_ADDRESS (frame->next)
+ + FRAME_ARGS_SKIP + sigcontext_offs,
+ ptrbytes);
+ else
+ sigcontext_addr = read_memory_integer (read_register (SP_REGNUM)
+ + sigcontext_offs,
+ ptrbytes);
+
+ /* Don't cause a memory_error when accessing sigcontext in case the stack
+ layout has changed or the stack is corrupt. */
+ target_read_memory (sigcontext_addr + SIGCONTEXT_PC_OFFSET, buf, ptrbytes);
+ return extract_unsigned_integer (buf, ptrbytes);
+}
+#endif /* SIGCONTEXT_PC_OFFSET */
+
void
_initialize_blockframe ()
{