/* Everything about breakpoints, for GDB.
- Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
- Free Software Foundation, Inc.
+
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "annotate.h"
#include "symfile.h"
#include "objfiles.h"
+#include "linespec.h"
+#include "completer.h"
+#include "gdb.h"
+#include "ui-out.h"
#include "gdb-events.h"
static void until_break_command_continuation (struct continuation_arg *arg);
-static void
-catch_command_1 PARAMS ((char *, int, int));
-
-static void
-enable_delete_command PARAMS ((char *, int));
-
-static void
-enable_delete_breakpoint PARAMS ((struct breakpoint *));
+static void catch_command_1 (char *, int, int);
-static void
-enable_once_command PARAMS ((char *, int));
+static void enable_delete_command (char *, int);
-static void
-enable_once_breakpoint PARAMS ((struct breakpoint *));
+static void enable_delete_breakpoint (struct breakpoint *);
-static void
-disable_command PARAMS ((char *, int));
+static void enable_once_command (char *, int);
-static void
-enable_command PARAMS ((char *, int));
+static void enable_once_breakpoint (struct breakpoint *);
-static void
-map_breakpoint_numbers PARAMS ((char *, void (*)(struct breakpoint *)));
+static void disable_command (char *, int);
-static void
-ignore_command PARAMS ((char *, int));
+static void enable_command (char *, int);
-static int breakpoint_re_set_one PARAMS ((PTR));
+static void map_breakpoint_numbers (char *, void (*)(struct breakpoint *));
-static void
-clear_command PARAMS ((char *, int));
+static void ignore_command (char *, int);
-static void
-catch_command PARAMS ((char *, int));
+static int breakpoint_re_set_one (PTR);
-static void
-handle_gnu_4_16_catch_command PARAMS ((char *, int, int));
+static void clear_command (char *, int);
-static struct symtabs_and_lines
-get_catch_sals PARAMS ((int));
+static void catch_command (char *, int);
-static void
-watch_command PARAMS ((char *, int));
+static void handle_gnu_4_16_catch_command (char *, int, int);
-static int
-can_use_hardware_watchpoint PARAMS ((struct value *));
+static struct symtabs_and_lines get_catch_sals (int);
-static void break_at_finish_command PARAMS ((char *, int));
-static void break_at_finish_at_depth_command PARAMS ((char *, int));
+static void watch_command (char *, int);
-void
-tbreak_command PARAMS ((char *, int));
+static int can_use_hardware_watchpoint (struct value *);
-static void tbreak_at_finish_command PARAMS ((char *, int));
+extern void break_at_finish_command (char *, int);
+extern void break_at_finish_at_depth_command (char *, int);
-static void
-break_command_1 PARAMS ((char *, int, int));
+extern void tbreak_at_finish_command (char *, int);
-static void
-mention PARAMS ((struct breakpoint *));
+static void break_command_1 (char *, int, int);
-struct breakpoint *
- set_raw_breakpoint PARAMS ((struct symtab_and_line));
+static void mention (struct breakpoint *);
-static void
-check_duplicates PARAMS ((CORE_ADDR, asection *));
+struct breakpoint *set_raw_breakpoint (struct symtab_and_line, enum bptype);
-static void
-describe_other_breakpoints PARAMS ((CORE_ADDR, asection *));
+static void check_duplicates (struct breakpoint *);
-static void
-breakpoints_info PARAMS ((char *, int));
+static void describe_other_breakpoints (CORE_ADDR, asection *);
-static void
-breakpoint_1 PARAMS ((int, int));
+static void breakpoints_info (char *, int);
-static bpstat
- bpstat_alloc PARAMS ((struct breakpoint *, bpstat));
+static void breakpoint_1 (int, int);
-static int breakpoint_cond_eval PARAMS ((PTR));
+static bpstat bpstat_alloc (struct breakpoint *, bpstat);
-static void
-cleanup_executing_breakpoints PARAMS ((PTR));
+static int breakpoint_cond_eval (PTR);
-static void
-commands_command PARAMS ((char *, int));
+static void cleanup_executing_breakpoints (PTR);
-static void
-condition_command PARAMS ((char *, int));
+static void commands_command (char *, int);
-static int
-get_number PARAMS ((char **));
+static void condition_command (char *, int);
-void
-set_breakpoint_count PARAMS ((int));
+static int get_number_trailer (char **, int);
-#if 0
-static struct breakpoint *
- create_temp_exception_breakpoint PARAMS ((CORE_ADDR));
-#endif
+void set_breakpoint_count (int);
typedef enum
{
}
insertion_state_t;
-static int
-remove_breakpoint PARAMS ((struct breakpoint *, insertion_state_t));
+static int remove_breakpoint (struct breakpoint *, insertion_state_t);
-static int print_it_normal PARAMS ((bpstat));
+static enum print_stop_action print_it_typical (bpstat);
+
+static enum print_stop_action print_bp_stop_message (bpstat bs);
typedef struct
{
enum exception_event_kind kind;
- int enable;
+ int enable_p;
}
args_for_catchpoint_enable;
-static int watchpoint_check PARAMS ((PTR));
-
-static int cover_target_enable_exception_callback PARAMS ((PTR));
+static int watchpoint_check (PTR);
-static int print_it_done PARAMS ((bpstat));
+static int cover_target_enable_exception_callback (PTR);
-static int print_it_noop PARAMS ((bpstat));
+static void maintenance_info_breakpoints (char *, int);
-static void maintenance_info_breakpoints PARAMS ((char *, int));
+static void create_longjmp_breakpoint (char *);
-#ifdef GET_LONGJMP_TARGET
-static void create_longjmp_breakpoint PARAMS ((char *));
-#endif
+static void create_overlay_event_breakpoint (char *);
-static int hw_breakpoint_used_count PARAMS ((void));
+static int hw_breakpoint_used_count (void);
-static int hw_watchpoint_used_count PARAMS ((enum bptype, int *));
+static int hw_watchpoint_used_count (enum bptype, int *);
-static void hbreak_command PARAMS ((char *, int));
+static void hbreak_command (char *, int);
-static void thbreak_command PARAMS ((char *, int));
+static void thbreak_command (char *, int);
-static void watch_command_1 PARAMS ((char *, int, int));
+static void watch_command_1 (char *, int, int);
-static void rwatch_command PARAMS ((char *, int));
+static void rwatch_command (char *, int);
-static void awatch_command PARAMS ((char *, int));
+static void awatch_command (char *, int);
-static void do_enable_breakpoint PARAMS ((struct breakpoint *, enum bpdisp));
+static void do_enable_breakpoint (struct breakpoint *, enum bpdisp);
-static void solib_load_unload_1 PARAMS ((char *hookname,
- int tempflag,
- char *dll_pathname,
- char *cond_string,
- enum bptype bp_kind));
+static void solib_load_unload_1 (char *hookname,
+ int tempflag,
+ char *dll_pathname,
+ char *cond_string, enum bptype bp_kind);
-static void create_fork_vfork_event_catchpoint PARAMS ((int tempflag,
- char *cond_string,
- enum bptype bp_kind));
+static void create_fork_vfork_event_catchpoint (int tempflag,
+ char *cond_string,
+ enum bptype bp_kind);
-static void break_at_finish_at_depth_command_1 PARAMS ((char *arg,
- int flag,
- int from_tty));
+static void break_at_finish_at_depth_command_1 (char *arg,
+ int flag, int from_tty);
-static void break_at_finish_command_1 PARAMS ((char *arg,
- int flag,
- int from_tty));
+static void break_at_finish_command_1 (char *arg, int flag, int from_tty);
-static void stop_command PARAMS ((char *arg, int from_tty));
+static void stop_command (char *arg, int from_tty);
-static void stopin_command PARAMS ((char *arg, int from_tty));
+static void stopin_command (char *arg, int from_tty);
-static void stopat_command PARAMS ((char *arg, int from_tty));
+static void stopat_command (char *arg, int from_tty);
-static char *ep_find_event_name_end PARAMS ((char *arg));
+static char *ep_find_event_name_end (char *arg);
-static char *ep_parse_optional_if_clause PARAMS ((char **arg));
+static char *ep_parse_optional_if_clause (char **arg);
-static char *ep_parse_optional_filename PARAMS ((char **arg));
+static char *ep_parse_optional_filename (char **arg);
-static void catch_exec_command_1 PARAMS ((char *arg, int tempflag,
- int from_tty));
+#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
+static void catch_exec_command_1 (char *arg, int tempflag, int from_tty);
+#endif
-static void create_exception_catchpoint
- PARAMS ((int tempflag, char *cond_string,
- enum exception_event_kind ex_event,
- struct symtab_and_line * sal));
+static void create_exception_catchpoint (int tempflag, char *cond_string,
+ enum exception_event_kind ex_event,
+ struct symtab_and_line *sal);
-static void catch_exception_command_1
- PARAMS ((enum exception_event_kind ex_event,
- char *arg, int tempflag, int from_tty));
+static void catch_exception_command_1 (enum exception_event_kind ex_event,
+ char *arg, int tempflag, int from_tty);
-static void tcatch_command PARAMS ((char *arg, int from_tty));
+static void tcatch_command (char *arg, int from_tty);
-static void ep_skip_leading_whitespace PARAMS ((char **s));
+static void ep_skip_leading_whitespace (char **s);
/* Prototypes for exported functions. */
-static void
-awatch_command PARAMS ((char *, int));
-
-static void
-do_enable_breakpoint PARAMS ((struct breakpoint *, enum bpdisp));
-
/* If FALSE, gdb will not use hardware support for watchpoints, even
if such is available. */
static int can_use_hw_watchpoints;
-void _initialize_breakpoint PARAMS ((void));
-
-void set_breakpoint_count PARAMS ((int));
+void _initialize_breakpoint (void);
extern int addressprint; /* Print machine addresses? */
-#if defined (GET_LONGJMP_TARGET) || defined (SOLIB_ADD)
-static int internal_breakpoint_number = -1;
-#endif
-
/* Are we executing breakpoint commands? */
static int executing_breakpoint_commands;
+/* Are overlay event breakpoints enabled? */
+static int overlay_events_enabled;
+
/* Walk the following statement or block through all breakpoints.
ALL_BREAKPOINTS_SAFE does so even if the statment deletes the current
breakpoint. */
-#define ALL_BREAKPOINTS(b) for (b = breakpoint_chain; b; b = b->next)
+#define ALL_BREAKPOINTS(B) for (B = breakpoint_chain; B; B = B->next)
-#define ALL_BREAKPOINTS_SAFE(b,tmp) \
- for (b = breakpoint_chain; \
- b? (tmp=b->next, 1): 0; \
- b = tmp)
+#define ALL_BREAKPOINTS_SAFE(B,TMP) \
+ for (B = breakpoint_chain; \
+ B ? (TMP=B->next, 1): 0; \
+ B = TMP)
/* True if SHIFT_INST_REGS defined, false otherwise. */
/* Set breakpoint count to NUM. */
void
-set_breakpoint_count (num)
- int num;
+set_breakpoint_count (int num)
{
breakpoint_count = num;
set_internalvar (lookup_internalvar ("bpnum"),
/* Used in run_command to zero the hit count when a new run starts. */
void
-clear_breakpoint_hit_counts ()
+clear_breakpoint_hit_counts (void)
{
struct breakpoint *b;
Currently the string can either be a number or "$" followed by the name
of a convenience variable. Making it an expression wouldn't work well
- for map_breakpoint_numbers (e.g. "4 + 5 + 6"). */
+ for map_breakpoint_numbers (e.g. "4 + 5 + 6").
+
+ TRAILER is a character which can be found after the number; most
+ commonly this is `-'. If you don't want a trailer, use \0. */
static int
-get_number (pp)
- char **pp;
+get_number_trailer (char **pp, int trailer)
{
- int retval;
+ int retval = 0; /* default */
char *p = *pp;
if (p == NULL)
to pass to lookup_internalvar(). */
char *varname;
char *start = ++p;
- value_ptr val;
+ struct value *val;
while (isalnum (*p) || *p == '_')
p++;
strncpy (varname, start, p - start);
varname[p - start] = '\0';
val = value_of_internalvar (lookup_internalvar (varname));
- if (TYPE_CODE (VALUE_TYPE (val)) != TYPE_CODE_INT)
- error (
- "Convenience variables used to specify breakpoints must have integer values."
- );
- retval = (int) value_as_long (val);
+ if (TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT)
+ retval = (int) value_as_long (val);
+ else
+ {
+ printf_filtered ("Convenience variable must have integer value.\n");
+ retval = 0;
+ }
}
else
{
++p;
if (p == *pp)
/* There is no number here. (e.g. "cond a == b"). */
- error_no_arg ("breakpoint number");
- retval = atoi (*pp);
+ {
+ /* Skip non-numeric token */
+ while (*p && !isspace((int) *p))
+ ++p;
+ /* Return zero, which caller must interpret as error. */
+ retval = 0;
+ }
+ else
+ retval = atoi (*pp);
+ }
+ if (!(isspace (*p) || *p == '\0' || *p == trailer))
+ {
+ /* Trailing junk: return 0 and let caller print error msg. */
+ while (!(isspace (*p) || *p == '\0' || *p == trailer))
+ ++p;
+ retval = 0;
}
- if (!(isspace (*p) || *p == '\0'))
- error ("breakpoint number expected");
while (isspace (*p))
p++;
*pp = p;
return retval;
}
+
+
+/* Like get_number_trailer, but don't allow a trailer. */
+int
+get_number (char **pp)
+{
+ return get_number_trailer (pp, '\0');
+}
+
+/* Parse a number or a range.
+ * A number will be of the form handled by get_number.
+ * A range will be of the form <number1> - <number2>, and
+ * will represent all the integers between number1 and number2,
+ * inclusive.
+ *
+ * While processing a range, this fuction is called iteratively;
+ * At each call it will return the next value in the range.
+ *
+ * At the beginning of parsing a range, the char pointer PP will
+ * be advanced past <number1> and left pointing at the '-' token.
+ * Subsequent calls will not advance the pointer until the range
+ * is completed. The call that completes the range will advance
+ * pointer PP past <number2>.
+ */
+
+int
+get_number_or_range (char **pp)
+{
+ static int last_retval, end_value;
+ static char *end_ptr;
+ static int in_range = 0;
+
+ if (**pp != '-')
+ {
+ /* Default case: pp is pointing either to a solo number,
+ or to the first number of a range. */
+ last_retval = get_number_trailer (pp, '-');
+ if (**pp == '-')
+ {
+ char **temp;
+
+ /* This is the start of a range (<number1> - <number2>).
+ Skip the '-', parse and remember the second number,
+ and also remember the end of the final token. */
+
+ temp = &end_ptr;
+ end_ptr = *pp + 1;
+ while (isspace ((int) *end_ptr))
+ end_ptr++; /* skip white space */
+ end_value = get_number (temp);
+ if (end_value < last_retval)
+ {
+ error ("inverted range");
+ }
+ else if (end_value == last_retval)
+ {
+ /* degenerate range (number1 == number2). Advance the
+ token pointer so that the range will be treated as a
+ single number. */
+ *pp = end_ptr;
+ }
+ else
+ in_range = 1;
+ }
+ }
+ else if (! in_range)
+ error ("negative value");
+ else
+ {
+ /* pp points to the '-' that betokens a range. All
+ number-parsing has already been done. Return the next
+ integer value (one greater than the saved previous value).
+ Do not advance the token pointer 'pp' until the end of range
+ is reached. */
+
+ if (++last_retval == end_value)
+ {
+ /* End of range reached; advance token pointer. */
+ *pp = end_ptr;
+ in_range = 0;
+ }
+ }
+ return last_retval;
+}
+
+
\f
/* condition N EXP -- set break condition of breakpoint N to EXP. */
static void
-condition_command (arg, from_tty)
- char *arg;
- int from_tty;
+condition_command (char *arg, int from_tty)
{
register struct breakpoint *b;
char *p;
p = arg;
bnum = get_number (&p);
+ if (bnum == 0)
+ error ("Bad breakpoint argument: '%s'", arg);
ALL_BREAKPOINTS (b)
if (b->number == bnum)
{
if (b->cond)
{
- free ((PTR) b->cond);
+ xfree (b->cond);
b->cond = 0;
}
if (b->cond_string != NULL)
- free ((PTR) b->cond_string);
+ xfree (b->cond_string);
if (*p == 0)
{
error ("Junk at end of expression");
}
breakpoints_changed ();
+ breakpoint_modify_event (b->number);
return;
}
/* ARGSUSED */
static void
-commands_command (arg, from_tty)
- char *arg;
- int from_tty;
+commands_command (char *arg, int from_tty)
{
register struct breakpoint *b;
char *p;
p = arg;
bnum = get_number (&p);
+
if (p && *p)
error ("Unexpected extra arguments following breakpoint number.");
free_command_lines (&b->commands);
b->commands = l;
breakpoints_changed ();
+ breakpoint_modify_event (b->number);
return;
}
error ("No breakpoint number %d.", bnum);
shadow contents, not the breakpoints themselves. From breakpoint.c. */
int
-read_memory_nobpt (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- unsigned len;
+read_memory_nobpt (CORE_ADDR memaddr, char *myaddr, unsigned len)
{
int status;
struct breakpoint *b;
if (bp_addr + bp_size < memaddr + len)
{
/* Copy the section of memory after the breakpoint. */
- status = read_memory_nobpt
- (bp_addr + bp_size,
- myaddr + bp_addr + bp_size - memaddr,
- memaddr + len - (bp_addr + bp_size));
+ status = read_memory_nobpt (bp_addr + bp_size,
+ myaddr + bp_addr + bp_size - memaddr,
+ memaddr + len - (bp_addr + bp_size));
if (status != 0)
return status;
}
or an `errno' value if could not write the inferior. */
int
-insert_breakpoints ()
+insert_breakpoints (void)
{
register struct breakpoint *b, *temp;
int return_val = 0; /* return success code. */
ALL_BREAKPOINTS_SAFE (b, temp)
{
- if (b->enable == permanent)
+ if (b->enable_state == bp_permanent)
/* Permanent breakpoints cannot be inserted or removed. */
continue;
else if (b->type != bp_watchpoint
&& b->type != bp_catch_exec
&& b->type != bp_catch_throw
&& b->type != bp_catch_catch
- && b->enable != disabled
- && b->enable != shlib_disabled
- && b->enable != call_disabled
+ && b->enable_state != bp_disabled
+ && b->enable_state != bp_shlib_disabled
+ && b->enable_state != bp_call_disabled
&& !b->inserted
&& !b->duplicate)
{
- if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (b->address, b->shadow_contents);
+ /* "Normal" instruction breakpoint: either the standard
+ trap-instruction bp (bp_breakpoint), or a
+ bp_hardware_breakpoint. */
+
+ /* First check to see if we have to handle an overlay. */
+ if (overlay_debugging == ovly_off
+ || b->section == NULL
+ || !(section_is_overlay (b->section)))
+ {
+ /* No overlay handling: just set the breakpoint. */
+
+ if (b->type == bp_hardware_breakpoint)
+ val = target_insert_hw_breakpoint (b->address,
+ b->shadow_contents);
+ else
+ val = target_insert_breakpoint (b->address, b->shadow_contents);
+ }
else
{
- /* Check to see if breakpoint is in an overlay section;
- if so, we should set the breakpoint at the LMA address.
- Only if the section is currently mapped should we ALSO
- set a break at the VMA address. */
- if (overlay_debugging && b->section &&
- section_is_overlay (b->section))
+ /* This breakpoint is in an overlay section.
+ Shall we set a breakpoint at the LMA? */
+ if (!overlay_events_enabled)
+ {
+ /* Yes -- overlay event support is not active,
+ so we must try to set a breakpoint at the LMA.
+ This will not work for a hardware breakpoint. */
+ if (b->type == bp_hardware_breakpoint)
+ warning ("hardware breakpoint %d not supported in overlay!\n",
+ b->number);
+ else
+ {
+ CORE_ADDR addr = overlay_unmapped_address (b->address,
+ b->section);
+ /* Set a software (trap) breakpoint at the LMA. */
+ val = target_insert_breakpoint (addr, b->shadow_contents);
+ if (val != 0)
+ warning ("overlay breakpoint %d failed: in ROM?",
+ b->number);
+ }
+ }
+ /* Shall we set a breakpoint at the VMA? */
+ if (section_is_mapped (b->section))
{
- CORE_ADDR addr;
-
- addr = overlay_unmapped_address (b->address, b->section);
- val = target_insert_breakpoint (addr, b->shadow_contents);
- /* This would be the time to check val, to see if the
- breakpoint write to the load address succeeded.
- However, this might be an ordinary occurrance, eg. if
- the unmapped overlay is in ROM. */
- val = 0; /* in case unmapped address failed */
- if (section_is_mapped (b->section))
+ /* Yes. This overlay section is mapped into memory. */
+ if (b->type == bp_hardware_breakpoint)
+ val = target_insert_hw_breakpoint (b->address,
+ b->shadow_contents);
+ else
val = target_insert_breakpoint (b->address,
b->shadow_contents);
}
- else /* ordinary (non-overlay) address */
- val = target_insert_breakpoint (b->address, b->shadow_contents);
+ else
+ {
+ /* No. This breakpoint will not be inserted.
+ No error, but do not mark the bp as 'inserted'. */
+ continue;
+ }
}
+
if (val)
{
/* Can't set the breakpoint. */
{
/* See also: disable_breakpoints_in_shlibs. */
val = 0;
- b->enable = shlib_disabled;
+ b->enable_state = bp_shlib_disabled;
if (!disabled_breaks)
{
target_terminal_ours_for_output ();
return_val = val; /* remember failure */
}
else if (ep_is_exception_catchpoint (b)
- && b->enable != disabled
- && b->enable != shlib_disabled
- && b->enable != call_disabled
+ && b->enable_state != bp_disabled
+ && b->enable_state != bp_shlib_disabled
+ && b->enable_state != bp_call_disabled
&& !b->inserted
&& !b->duplicate)
target_terminal_ours_for_output ();
warning ("Cannot insert catchpoint %d; disabling it.",
b->number);
- b->enable = disabled;
+ b->enable_state = bp_disabled;
}
else
{
args_for_catchpoint_enable args;
args.kind = b->type == bp_catch_catch ?
EX_EVENT_CATCH : EX_EVENT_THROW;
- args.enable = 1;
+ args.enable_p = 1;
val = catch_errors (cover_target_enable_exception_callback,
&args,
message, RETURN_MASK_ALL);
target_terminal_ours_for_output ();
warning ("Cannot insert catchpoint %d; disabling it.",
b->number);
- b->enable = disabled;
+ b->enable_state = bp_disabled;
}
}
else if ((b->type == bp_hardware_watchpoint ||
b->type == bp_read_watchpoint ||
b->type == bp_access_watchpoint)
- && b->enable == enabled
+ && b->enable_state == bp_enabled
+ && b->disposition != disp_del_at_next_stop
&& !b->inserted
&& !b->duplicate)
{
struct frame_info *saved_frame;
int saved_level, within_current_scope;
- value_ptr mark = value_mark ();
- value_ptr v;
+ struct value *mark = value_mark ();
+ struct value *v;
/* Save the current frame and level so we can restore it after
evaluating the watchpoint expression on its own frame. */
saved_frame = selected_frame;
- saved_level = selected_frame_level;
+ saved_level = frame_relative_level (selected_frame);
/* Determine if the watchpoint is within scope. */
if (b->exp_valid_block == NULL)
else
{
struct frame_info *fi;
-
- /* There might be no current frame at this moment if we are
- resuming from a step over a breakpoint.
- Set up current frame before trying to find the watchpoint
- frame. */
- get_current_frame ();
- fi = find_frame_addr_in_frame_chain (b->watchpoint_frame);
+ fi = frame_find_by_id (b->watchpoint_frame);
within_current_scope = (fi != NULL);
if (within_current_scope)
- select_frame (fi, -1);
+ select_frame (fi);
}
if (within_current_scope)
{
/* Evaluate the expression and cut the chain of values
- produced off from the value chain. */
+ produced off from the value chain.
+
+ Make sure the value returned isn't lazy; we use
+ laziness to determine what memory GDB actually needed
+ in order to compute the value of the expression. */
v = evaluate_expression (b->exp);
+ VALUE_CONTENTS(v);
value_release_to_mark (mark);
b->val_chain = v;
/* Look at each value on the value chain. */
for (; v; v = v->next)
{
- /* If it's a memory location, then we must watch it. */
- if (v->lval == lval_memory)
+ /* If it's a memory location, and GDB actually needed
+ its contents to evaluate the expression, then we
+ must watch it. */
+ if (VALUE_LVAL (v) == lval_memory
+ && ! VALUE_LAZY (v))
{
- CORE_ADDR addr;
- int len, type;
-
- addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
- len = TYPE_LENGTH (VALUE_TYPE (v));
- type = hw_write;
- if (b->type == bp_read_watchpoint)
- type = hw_read;
- else if (b->type == bp_access_watchpoint)
- type = hw_access;
-
- val = target_insert_watchpoint (addr, len, type);
- if (val == -1)
+ struct type *vtype = check_typedef (VALUE_TYPE (v));
+
+ /* We only watch structs and arrays if user asked
+ for it explicitly, never if they just happen to
+ appear in the middle of some value chain. */
+ if (v == b->val_chain
+ || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
+ && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
{
- b->inserted = 0;
- break;
+ CORE_ADDR addr;
+ int len, type;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ type = hw_write;
+ if (b->type == bp_read_watchpoint)
+ type = hw_read;
+ else if (b->type == bp_access_watchpoint)
+ type = hw_access;
+
+ val = target_insert_watchpoint (addr, len, type);
+ if (val == -1)
+ {
+ /* Don't exit the loop, try to insert
+ every value on the value chain. That's
+ because we will be removing all the
+ watches below, and removing a
+ watchpoint we didn't insert could have
+ adverse effects. */
+ b->inserted = 0;
+ }
+ val = 0;
}
- val = 0;
}
}
/* Failure to insert a watchpoint on any memory value in the
}
else
{
- printf_filtered ("Hardware watchpoint %d deleted", b->number);
+ printf_filtered ("Hardware watchpoint %d deleted ", b->number);
printf_filtered ("because the program has left the block \n");
printf_filtered ("in which its expression is valid.\n");
if (b->related_breakpoint)
- b->related_breakpoint->disposition = del_at_next_stop;
- b->disposition = del_at_next_stop;
+ b->related_breakpoint->disposition = disp_del_at_next_stop;
+ b->disposition = disp_del_at_next_stop;
}
/* Restore the frame and level. */
if ((saved_frame != selected_frame) ||
- (saved_level != selected_frame_level))
- select_and_print_frame (saved_frame, saved_level);
+ (saved_level != frame_relative_level (selected_frame)))
+ select_frame (saved_frame);
if (val)
return_val = val; /* remember failure */
else if ((b->type == bp_catch_fork
|| b->type == bp_catch_vfork
|| b->type == bp_catch_exec)
- && b->enable == enabled
+ && b->enable_state == bp_enabled
&& !b->inserted
&& !b->duplicate)
{
switch (b->type)
{
case bp_catch_fork:
- val = target_insert_fork_catchpoint (inferior_pid);
+ val = target_insert_fork_catchpoint (PIDGET (inferior_ptid));
break;
case bp_catch_vfork:
- val = target_insert_vfork_catchpoint (inferior_pid);
+ val = target_insert_vfork_catchpoint (PIDGET (inferior_ptid));
break;
case bp_catch_exec:
- val = target_insert_exec_catchpoint (inferior_pid);
+ val = target_insert_exec_catchpoint (PIDGET (inferior_ptid));
break;
default:
warning ("Internal error, %s line %d.", __FILE__, __LINE__);
int
-remove_breakpoints ()
+remove_breakpoints (void)
{
register struct breakpoint *b;
int val;
}
int
-reattach_breakpoints (pid)
- int pid;
+remove_hw_watchpoints (void)
+{
+ register struct breakpoint *b;
+ int val;
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->inserted
+ && (b->type == bp_hardware_watchpoint
+ || b->type == bp_read_watchpoint
+ || b->type == bp_access_watchpoint))
+ {
+ val = remove_breakpoint (b, mark_uninserted);
+ if (val != 0)
+ return val;
+ }
+ }
+ return 0;
+}
+
+int
+reattach_breakpoints (int pid)
{
register struct breakpoint *b;
int val;
- int saved_inferior_pid = inferior_pid;
+ struct cleanup *old_chain = save_inferior_ptid ();
- /* FIXME: use a cleanup, to insure that inferior_pid gets replaced! */
- inferior_pid = pid; /* Because remove_breakpoint will use this global. */
+ /* Set inferior_ptid; remove_breakpoint uses this global. */
+ inferior_ptid = pid_to_ptid (pid);
ALL_BREAKPOINTS (b)
{
if (b->inserted)
val = target_insert_breakpoint (b->address, b->shadow_contents);
if (val != 0)
{
- inferior_pid = saved_inferior_pid;
+ do_cleanups (old_chain);
return val;
}
}
}
- inferior_pid = saved_inferior_pid;
+ do_cleanups (old_chain);
return 0;
}
void
-update_breakpoints_after_exec ()
+update_breakpoints_after_exec (void)
{
struct breakpoint *b;
struct breakpoint *temp;
continue;
}
+ /* Thread event breakpoints must be set anew after an exec(),
+ as must overlay event breakpoints. */
+ if (b->type == bp_thread_event || b->type == bp_overlay_event)
+ {
+ delete_breakpoint (b);
+ continue;
+ }
+
/* Step-resume breakpoints are meaningless after an exec(). */
if (b->type == bp_step_resume)
{
??rehrauer: Let's hope that merely clearing out this catchpoint's
target address field, if any, is sufficient to have it be reset
- automagically. Certainly on HP-UX that's true. */
+ automagically. Certainly on HP-UX that's true.
+
+ Jim Blandy <jimb@redhat.com>: Actually, zero is a perfectly
+ valid code address on some platforms (like the mn10200 and
+ mn10300 simulators). We shouldn't assign any special
+ interpretation to a breakpoint with a zero address. And in
+ fact, GDB doesn't --- I can't see what that comment above is
+ talking about. As far as I can tell, setting the address of a
+ bp_catch_exec/bp_catch_vfork/bp_catch_fork breakpoint to zero
+ is meaningless, since those are implemented with HP-UX kernel
+ hackery, not by storing breakpoint instructions somewhere. */
if ((b->type == bp_catch_exec) ||
(b->type == bp_catch_vfork) ||
(b->type == bp_catch_fork))
/* If this breakpoint has survived the above battery of checks, then
it must have a symbolic address. Be sure that it gets reevaluated
- to a target address, rather than reusing the old evaluation. */
+ to a target address, rather than reusing the old evaluation.
+
+ Jim Blandy <jimb@redhat.com>: As explained above in the comment
+ for bp_catch_exec and friends, I'm pretty sure this is entirely
+ unnecessary. A call to breakpoint_re_set_one always recomputes
+ the breakpoint's address from scratch, or deletes it if it can't.
+ So I think this assignment could be deleted without effect. */
b->address = (CORE_ADDR) NULL;
}
+ /* FIXME what about longjmp breakpoints? Re-create them here? */
+ create_overlay_event_breakpoint ("_ovly_debug_event");
}
int
-detach_breakpoints (pid)
- int pid;
+detach_breakpoints (int pid)
{
register struct breakpoint *b;
int val;
- int saved_inferior_pid = inferior_pid;
+ struct cleanup *old_chain = save_inferior_ptid ();
- if (pid == inferior_pid)
- error ("Cannot detach breakpoints of inferior_pid");
+ if (pid == PIDGET (inferior_ptid))
+ error ("Cannot detach breakpoints of inferior_ptid");
- /* FIXME: use a cleanup, to insure that inferior_pid gets replaced! */
- inferior_pid = pid; /* Because remove_breakpoint will use this global. */
+ /* Set inferior_ptid; remove_breakpoint uses this global. */
+ inferior_ptid = pid_to_ptid (pid);
ALL_BREAKPOINTS (b)
{
if (b->inserted)
val = remove_breakpoint (b, mark_inserted);
if (val != 0)
{
- inferior_pid = saved_inferior_pid;
+ do_cleanups (old_chain);
return val;
}
}
}
- inferior_pid = saved_inferior_pid;
+ do_cleanups (old_chain);
return 0;
}
static int
-remove_breakpoint (b, is)
- struct breakpoint *b;
- insertion_state_t is;
+remove_breakpoint (struct breakpoint *b, insertion_state_t is)
{
int val;
- if (b->enable == permanent)
+ if (b->enable_state == bp_permanent)
/* Permanent breakpoints cannot be inserted or removed. */
return 0;
&& b->type != bp_catch_catch
&& b->type != bp_catch_throw)
{
- if (b->type == bp_hardware_breakpoint)
- val = target_remove_hw_breakpoint (b->address, b->shadow_contents);
+ /* "Normal" instruction breakpoint: either the standard
+ trap-instruction bp (bp_breakpoint), or a
+ bp_hardware_breakpoint. */
+
+ /* First check to see if we have to handle an overlay. */
+ if (overlay_debugging == ovly_off
+ || b->section == NULL
+ || !(section_is_overlay (b->section)))
+ {
+ /* No overlay handling: just remove the breakpoint. */
+
+ if (b->type == bp_hardware_breakpoint)
+ val = target_remove_hw_breakpoint (b->address,
+ b->shadow_contents);
+ else
+ val = target_remove_breakpoint (b->address, b->shadow_contents);
+ }
else
{
- /* Check to see if breakpoint is in an overlay section;
- if so, we should remove the breakpoint at the LMA address.
- If that is not equal to the raw address, then we should
- presumable remove the breakpoint there as well. */
- if (overlay_debugging && b->section &&
- section_is_overlay (b->section))
+ /* This breakpoint is in an overlay section.
+ Did we set a breakpoint at the LMA? */
+ if (!overlay_events_enabled)
+ {
+ /* Yes -- overlay event support is not active, so we
+ should have set a breakpoint at the LMA. Remove it.
+ */
+ CORE_ADDR addr = overlay_unmapped_address (b->address,
+ b->section);
+ /* Ignore any failures: if the LMA is in ROM, we will
+ have already warned when we failed to insert it. */
+ if (b->type != bp_hardware_breakpoint)
+ target_remove_hw_breakpoint (addr, b->shadow_contents);
+ else
+ target_remove_breakpoint (addr, b->shadow_contents);
+ }
+ /* Did we set a breakpoint at the VMA?
+ If so, we will have marked the breakpoint 'inserted'. */
+ if (b->inserted)
{
- CORE_ADDR addr;
-
- addr = overlay_unmapped_address (b->address, b->section);
- val = target_remove_breakpoint (addr, b->shadow_contents);
- /* This would be the time to check val, to see if the
- shadow breakpoint write to the load address succeeded.
- However, this might be an ordinary occurrance, eg. if
- the unmapped overlay is in ROM. */
- val = 0; /* in case unmapped address failed */
- if (section_is_mapped (b->section))
+ /* Yes -- remove it. Previously we did not bother to
+ remove the breakpoint if the section had been
+ unmapped, but let's not rely on that being safe. We
+ don't know what the overlay manager might do. */
+ if (b->type == bp_hardware_breakpoint)
+ val = target_remove_hw_breakpoint (b->address,
+ b->shadow_contents);
+ else
val = target_remove_breakpoint (b->address,
b->shadow_contents);
}
- else /* ordinary (non-overlay) address */
- val = target_remove_breakpoint (b->address, b->shadow_contents);
+ else
+ {
+ /* No -- not inserted, so no need to remove. No error. */
+ val = 0;
+ }
}
if (val)
return val;
else if ((b->type == bp_hardware_watchpoint ||
b->type == bp_read_watchpoint ||
b->type == bp_access_watchpoint)
- && b->enable == enabled
+ && b->enable_state == bp_enabled
&& !b->duplicate)
{
- value_ptr v, n;
+ struct value *v;
+ struct value *n;
b->inserted = (is == mark_inserted);
/* Walk down the saved value chain. */
{
/* For each memory reference remove the watchpoint
at that address. */
- if (v->lval == lval_memory)
+ if (VALUE_LVAL (v) == lval_memory
+ && ! VALUE_LAZY (v))
{
- CORE_ADDR addr;
- int len, type;
-
- addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
- len = TYPE_LENGTH (VALUE_TYPE (v));
- type = hw_write;
- if (b->type == bp_read_watchpoint)
- type = hw_read;
- else if (b->type == bp_access_watchpoint)
- type = hw_access;
+ struct type *vtype = check_typedef (VALUE_TYPE (v));
- val = target_remove_watchpoint (addr, len, type);
- if (val == -1)
- b->inserted = 1;
- val = 0;
+ if (v == b->val_chain
+ || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
+ && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
+ {
+ CORE_ADDR addr;
+ int len, type;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ type = hw_write;
+ if (b->type == bp_read_watchpoint)
+ type = hw_read;
+ else if (b->type == bp_access_watchpoint)
+ type = hw_access;
+
+ val = target_remove_watchpoint (addr, len, type);
+ if (val == -1)
+ b->inserted = 1;
+ val = 0;
+ }
}
}
/* Failure to remove any of the hardware watchpoints comes here. */
else if ((b->type == bp_catch_fork ||
b->type == bp_catch_vfork ||
b->type == bp_catch_exec)
- && b->enable == enabled
+ && b->enable_state == bp_enabled
&& !b->duplicate)
{
val = -1;
switch (b->type)
{
case bp_catch_fork:
- val = target_remove_fork_catchpoint (inferior_pid);
+ val = target_remove_fork_catchpoint (PIDGET (inferior_ptid));
break;
case bp_catch_vfork:
- val = target_remove_vfork_catchpoint (inferior_pid);
+ val = target_remove_vfork_catchpoint (PIDGET (inferior_ptid));
break;
case bp_catch_exec:
- val = target_remove_exec_catchpoint (inferior_pid);
+ val = target_remove_exec_catchpoint (PIDGET (inferior_ptid));
break;
default:
warning ("Internal error, %s line %d.", __FILE__, __LINE__);
}
else if ((b->type == bp_catch_catch ||
b->type == bp_catch_throw)
- && b->enable == enabled
+ && b->enable_state == bp_enabled
&& !b->duplicate)
{
}
else if (ep_is_exception_catchpoint (b)
&& b->inserted /* sometimes previous insert doesn't happen */
- && b->enable == enabled
+ && b->enable_state == bp_enabled
&& !b->duplicate)
{
/* Clear the "inserted" flag in all breakpoints. */
void
-mark_breakpoints_out ()
+mark_breakpoints_out (void)
{
register struct breakpoint *b;
void
-breakpoint_init_inferior (context)
- enum inf_context context;
+breakpoint_init_inferior (enum inf_context context)
{
register struct breakpoint *b, *temp;
static int warning_needed = 0;
the target, to advance the PC past the breakpoint. */
enum breakpoint_here
-breakpoint_here_p (pc)
- CORE_ADDR pc;
+breakpoint_here_p (CORE_ADDR pc)
{
register struct breakpoint *b;
int any_breakpoint_here = 0;
ALL_BREAKPOINTS (b)
- if ((b->enable == enabled
- || b->enable == permanent)
+ if ((b->enable_state == bp_enabled
+ || b->enable_state == bp_permanent)
&& b->address == pc) /* bp is enabled and matches pc */
{
- if (overlay_debugging &&
- section_is_overlay (b->section) &&
- !section_is_mapped (b->section))
+ if (overlay_debugging
+ && section_is_overlay (b->section)
+ && !section_is_mapped (b->section))
continue; /* unmapped overlay -- can't be a match */
- else if (b->enable == permanent)
+ else if (b->enable_state == bp_permanent)
return permanent_breakpoint_here;
else
any_breakpoint_here = 1;
at PC. */
int
-breakpoint_inserted_here_p (pc)
- CORE_ADDR pc;
+breakpoint_inserted_here_p (CORE_ADDR pc)
{
register struct breakpoint *b;
if (b->inserted
&& b->address == pc) /* bp is inserted and matches pc */
{
- if (overlay_debugging &&
- section_is_overlay (b->section) &&
- !section_is_mapped (b->section))
+ if (overlay_debugging
+ && section_is_overlay (b->section)
+ && !section_is_mapped (b->section))
continue; /* unmapped overlay -- can't be a match */
else
return 1;
bp_call_dummy breakpoint. */
int
-frame_in_dummy (frame)
- struct frame_info *frame;
+frame_in_dummy (struct frame_info *frame)
{
struct breakpoint *b;
return 0;
}
-/* breakpoint_match_thread (PC, PID) returns true if the breakpoint at PC
- is valid for process/thread PID. */
+/* breakpoint_thread_match (PC, PID) returns true if the breakpoint at
+ PC is valid for process/thread PID. */
int
-breakpoint_thread_match (pc, pid)
- CORE_ADDR pc;
- int pid;
+breakpoint_thread_match (CORE_ADDR pc, ptid_t ptid)
{
struct breakpoint *b;
int thread;
- thread = pid_to_thread_id (pid);
+ thread = pid_to_thread_id (ptid);
ALL_BREAKPOINTS (b)
- if (b->enable != disabled
- && b->enable != shlib_disabled
- && b->enable != call_disabled
+ if (b->enable_state != bp_disabled
+ && b->enable_state != bp_shlib_disabled
+ && b->enable_state != bp_call_disabled
&& b->address == pc
&& (b->thread == -1 || b->thread == thread))
{
- if (overlay_debugging &&
- section_is_overlay (b->section) &&
- !section_is_mapped (b->section))
+ if (overlay_debugging
+ && section_is_overlay (b->section)
+ && !section_is_mapped (b->section))
continue; /* unmapped overlay -- can't be a match */
else
return 1;
in breakpoint.h. */
int
-ep_is_catchpoint (ep)
- struct breakpoint *ep;
+ep_is_catchpoint (struct breakpoint *ep)
{
return
(ep->type == bp_catch_load)
|| (ep->type == bp_catch_vfork)
|| (ep->type == bp_catch_exec)
|| (ep->type == bp_catch_catch)
- || (ep->type == bp_catch_throw)
-
+ || (ep->type == bp_catch_throw);
/* ??rehrauer: Add more kinds here, as are implemented... */
- ;
}
int
-ep_is_shlib_catchpoint (ep)
- struct breakpoint *ep;
+ep_is_shlib_catchpoint (struct breakpoint *ep)
{
return
(ep->type == bp_catch_load)
- || (ep->type == bp_catch_unload)
- ;
+ || (ep->type == bp_catch_unload);
}
int
-ep_is_exception_catchpoint (ep)
- struct breakpoint *ep;
+ep_is_exception_catchpoint (struct breakpoint *ep)
{
return
(ep->type == bp_catch_catch)
- || (ep->type == bp_catch_throw)
- ;
+ || (ep->type == bp_catch_throw);
}
/* Clear a bpstat so that it says we are not at any breakpoint.
Also free any storage that is part of a bpstat. */
void
-bpstat_clear (bsp)
- bpstat *bsp;
+bpstat_clear (bpstat *bsp)
{
bpstat p;
bpstat q;
q = p->next;
if (p->old_val != NULL)
value_free (p->old_val);
- free ((PTR) p);
+ xfree (p);
p = q;
}
*bsp = NULL;
is part of the bpstat is copied as well. */
bpstat
-bpstat_copy (bs)
- bpstat bs;
+bpstat_copy (bpstat bs)
{
bpstat p = NULL;
bpstat tmp;
/* Find the bpstat associated with this breakpoint */
bpstat
-bpstat_find_breakpoint (bsp, breakpoint)
- bpstat bsp;
- struct breakpoint *breakpoint;
+bpstat_find_breakpoint (bpstat bsp, struct breakpoint *breakpoint)
{
if (bsp == NULL)
return NULL;
See wait_for_inferior's use of this function. */
struct breakpoint *
-bpstat_find_step_resume_breakpoint (bsp)
- bpstat bsp;
+bpstat_find_step_resume_breakpoint (bpstat bsp)
{
+ int current_thread;
+
if (bsp == NULL)
error ("Internal error (bpstat_find_step_resume_breakpoint)");
+ current_thread = pid_to_thread_id (inferior_ptid);
+
for (; bsp != NULL; bsp = bsp->next)
{
if ((bsp->breakpoint_at != NULL) &&
- (bsp->breakpoint_at->type == bp_step_resume))
+ (bsp->breakpoint_at->type == bp_step_resume) &&
+ (bsp->breakpoint_at->thread == current_thread ||
+ bsp->breakpoint_at->thread == -1))
return bsp->breakpoint_at;
}
Return 0 if passed a bpstat which does not indicate any breakpoints. */
int
-bpstat_num (bsp)
- bpstat *bsp;
+bpstat_num (bpstat *bsp)
{
struct breakpoint *b;
/* Modify BS so that the actions will not be performed. */
void
-bpstat_clear_actions (bs)
- bpstat bs;
+bpstat_clear_actions (bpstat bs)
{
for (; bs != NULL; bs = bs->next)
{
/* Stub for cleaning up our state if we error-out of a breakpoint command */
/* ARGSUSED */
static void
-cleanup_executing_breakpoints (ignore)
- PTR ignore;
+cleanup_executing_breakpoints (PTR ignore)
{
executing_breakpoint_commands = 0;
}
the global "breakpoint_proceeded" after each command. */
void
-bpstat_do_actions (bsp)
- bpstat *bsp;
+bpstat_do_actions (bpstat *bsp)
{
bpstat bs;
struct cleanup *old_chain;
discard_cleanups (old_chain);
}
-/* This is the normal print_it function for a bpstat. In the future,
+/* This is the normal print function for a bpstat. In the future,
much of this logic could (should?) be moved to bpstat_stop_status,
- by having it set different print_it functions.
-
- Current scheme: When we stop, bpstat_print() is called.
- It loops through the bpstat list of things causing this stop,
- calling the print_it function for each one. The default
- print_it function, used for breakpoints, is print_it_normal().
- (Also see print_it_noop() and print_it_done()).
-
- Return values from this routine (used by bpstat_print() to
- decide what to do):
- 1: Means we printed something, and we do *not* desire that
- something to be followed by a location.
- 0: Means we printed something, and we *do* desire that
- something to be followed by a location.
- -1: Means we printed nothing. */
-
-static int
-print_it_normal (bs)
- bpstat bs;
+ by having it set different print_it values.
+
+ Current scheme: When we stop, bpstat_print() is called. It loops
+ through the bpstat list of things causing this stop, calling the
+ print_bp_stop_message function on each one. The behavior of the
+ print_bp_stop_message function depends on the print_it field of
+ bpstat. If such field so indicates, call this function here.
+
+ Return values from this routine (ultimately used by bpstat_print()
+ and normal_stop() to decide what to do):
+ PRINT_NOTHING: Means we already printed all we needed to print,
+ don't print anything else.
+ PRINT_SRC_ONLY: Means we printed something, and we do *not* desire
+ that something to be followed by a location.
+ PRINT_SCR_AND_LOC: Means we printed something, and we *do* desire
+ that something to be followed by a location.
+ PRINT_UNKNOWN: Means we printed nothing or we need to do some more
+ analysis. */
+
+static enum print_stop_action
+print_it_typical (bpstat bs)
{
+ struct cleanup *old_chain;
+ struct ui_stream *stb;
+ stb = ui_out_stream_new (uiout);
+ old_chain = make_cleanup_ui_out_stream_delete (stb);
/* bs->breakpoint_at can be NULL if it was a momentary breakpoint
which has since been deleted. */
- if (bs->breakpoint_at == NULL
- || (bs->breakpoint_at->type != bp_breakpoint
- && bs->breakpoint_at->type != bp_catch_load
- && bs->breakpoint_at->type != bp_catch_unload
- && bs->breakpoint_at->type != bp_catch_fork
- && bs->breakpoint_at->type != bp_catch_vfork
- && bs->breakpoint_at->type != bp_catch_exec
- && bs->breakpoint_at->type != bp_catch_catch
- && bs->breakpoint_at->type != bp_catch_throw
- && bs->breakpoint_at->type != bp_hardware_breakpoint
- && bs->breakpoint_at->type != bp_watchpoint
- && bs->breakpoint_at->type != bp_read_watchpoint
- && bs->breakpoint_at->type != bp_access_watchpoint
- && bs->breakpoint_at->type != bp_hardware_watchpoint))
- return -1;
+ if (bs->breakpoint_at == NULL)
+ return PRINT_UNKNOWN;
- if (ep_is_shlib_catchpoint (bs->breakpoint_at))
+ switch (bs->breakpoint_at->type)
{
+ case bp_breakpoint:
+ case bp_hardware_breakpoint:
+ annotate_breakpoint (bs->breakpoint_at->number);
+ ui_out_text (uiout, "\nBreakpoint ");
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "breakpoint-hit");
+ ui_out_field_int (uiout, "bkptno", bs->breakpoint_at->number);
+ ui_out_text (uiout, ", ");
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case bp_shlib_event:
+ /* Did we stop because the user set the stop_on_solib_events
+ variable? (If so, we report this as a generic, "Stopped due
+ to shlib event" message.) */
+ printf_filtered ("Stopped due to shared library event\n");
+ return PRINT_NOTHING;
+ break;
+
+ case bp_thread_event:
+ /* Not sure how we will get here.
+ GDB should not stop for these breakpoints. */
+ printf_filtered ("Thread Event Breakpoint: gdb should not stop!\n");
+ return PRINT_NOTHING;
+ break;
+
+ case bp_overlay_event:
+ /* By analogy with the thread event, GDB should not stop for these. */
+ printf_filtered ("Overlay Event Breakpoint: gdb should not stop!\n");
+ return PRINT_NOTHING;
+ break;
+
+ case bp_catch_load:
annotate_catchpoint (bs->breakpoint_at->number);
printf_filtered ("\nCatchpoint %d (", bs->breakpoint_at->number);
- if (bs->breakpoint_at->type == bp_catch_load)
- printf_filtered ("loaded");
- else if (bs->breakpoint_at->type == bp_catch_unload)
- printf_filtered ("unloaded");
+ printf_filtered ("loaded");
printf_filtered (" %s), ", bs->breakpoint_at->triggered_dll_pathname);
- return 0;
- }
- else if (bs->breakpoint_at->type == bp_catch_fork ||
- bs->breakpoint_at->type == bp_catch_vfork)
- {
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case bp_catch_unload:
+ annotate_catchpoint (bs->breakpoint_at->number);
+ printf_filtered ("\nCatchpoint %d (", bs->breakpoint_at->number);
+ printf_filtered ("unloaded");
+ printf_filtered (" %s), ", bs->breakpoint_at->triggered_dll_pathname);
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case bp_catch_fork:
annotate_catchpoint (bs->breakpoint_at->number);
printf_filtered ("\nCatchpoint %d (", bs->breakpoint_at->number);
- if (bs->breakpoint_at->type == bp_catch_fork)
- printf_filtered ("forked");
- else if (bs->breakpoint_at->type == bp_catch_vfork)
- printf_filtered ("vforked");
+ printf_filtered ("forked");
printf_filtered (" process %d), ",
bs->breakpoint_at->forked_inferior_pid);
- return 0;
- }
- else if (bs->breakpoint_at->type == bp_catch_exec)
- {
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case bp_catch_vfork:
+ annotate_catchpoint (bs->breakpoint_at->number);
+ printf_filtered ("\nCatchpoint %d (", bs->breakpoint_at->number);
+ printf_filtered ("vforked");
+ printf_filtered (" process %d), ",
+ bs->breakpoint_at->forked_inferior_pid);
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case bp_catch_exec:
annotate_catchpoint (bs->breakpoint_at->number);
printf_filtered ("\nCatchpoint %d (exec'd %s), ",
bs->breakpoint_at->number,
bs->breakpoint_at->exec_pathname);
- return 0;
- }
- else if (bs->breakpoint_at->type == bp_catch_catch)
- {
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case bp_catch_catch:
if (current_exception_event &&
(CURRENT_EXCEPTION_KIND == EX_EVENT_CATCH))
{
printf_filtered ("unknown");
printf_filtered ("\n");
- return 1; /* don't bother to print location frame info */
+ /* don't bother to print location frame info */
+ return PRINT_SRC_ONLY;
}
else
{
- return -1; /* really throw, some other bpstat will handle it */
+ /* really throw, some other bpstat will handle it */
+ return PRINT_UNKNOWN;
}
- }
- else if (bs->breakpoint_at->type == bp_catch_throw)
- {
+ break;
+
+ case bp_catch_throw:
if (current_exception_event &&
(CURRENT_EXCEPTION_KIND == EX_EVENT_THROW))
{
printf_filtered ("unknown");
printf_filtered ("\n");
- return 1; /* don't bother to print location frame info */
+ /* don't bother to print location frame info */
+ return PRINT_SRC_ONLY;
}
else
{
- return -1; /* really catch, some other bpstat willhandle it */
+ /* really catch, some other bpstat will handle it */
+ return PRINT_UNKNOWN;
}
- }
+ break;
- else if (bs->breakpoint_at->type == bp_breakpoint ||
- bs->breakpoint_at->type == bp_hardware_breakpoint)
- {
- /* I think the user probably only wants to see one breakpoint
- number, not all of them. */
- annotate_breakpoint (bs->breakpoint_at->number);
- printf_filtered ("\nBreakpoint %d, ", bs->breakpoint_at->number);
- return 0;
- }
- else if ((bs->old_val != NULL) &&
- (bs->breakpoint_at->type == bp_watchpoint ||
- bs->breakpoint_at->type == bp_access_watchpoint ||
- bs->breakpoint_at->type == bp_hardware_watchpoint))
- {
- annotate_watchpoint (bs->breakpoint_at->number);
- mention (bs->breakpoint_at);
- printf_filtered ("\nOld value = ");
- value_print (bs->old_val, gdb_stdout, 0, Val_pretty_default);
- printf_filtered ("\nNew value = ");
- value_print (bs->breakpoint_at->val, gdb_stdout, 0,
- Val_pretty_default);
- printf_filtered ("\n");
- value_free (bs->old_val);
- bs->old_val = NULL;
+ case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ if (bs->old_val != NULL)
+ {
+ annotate_watchpoint (bs->breakpoint_at->number);
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "watchpoint-trigger");
+ mention (bs->breakpoint_at);
+ ui_out_tuple_begin (uiout, "value");
+ ui_out_text (uiout, "\nOld value = ");
+ value_print (bs->old_val, stb->stream, 0, Val_pretty_default);
+ ui_out_field_stream (uiout, "old", stb);
+ ui_out_text (uiout, "\nNew value = ");
+ value_print (bs->breakpoint_at->val, stb->stream, 0, Val_pretty_default);
+ ui_out_field_stream (uiout, "new", stb);
+ ui_out_tuple_end (uiout);
+ ui_out_text (uiout, "\n");
+ value_free (bs->old_val);
+ bs->old_val = NULL;
+ }
/* More than one watchpoint may have been triggered. */
- return -1;
- }
- else if (bs->breakpoint_at->type == bp_access_watchpoint ||
- bs->breakpoint_at->type == bp_read_watchpoint)
- {
+ return PRINT_UNKNOWN;
+ break;
+
+ case bp_read_watchpoint:
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "read-watchpoint-trigger");
mention (bs->breakpoint_at);
- printf_filtered ("\nValue = ");
- value_print (bs->breakpoint_at->val, gdb_stdout, 0,
- Val_pretty_default);
- printf_filtered ("\n");
- return -1;
- }
- /* We can't deal with it.
- Maybe another member of the bpstat chain can. */
- return -1;
-}
-
-/* Print a message indicating what happened.
- This is called from normal_stop().
- The input to this routine is the head of the bpstat list - a list
- of the eventpoints that caused this stop.
- This routine calls the "print_it" routine(s) associated
- with these eventpoints. This will print (for example)
- the "Breakpoint n," part of the output.
- The return value of this routine is one of:
-
- -1: Means we printed nothing
- 0: Means we printed something, and expect subsequent
- code to print the location. An example is
- "Breakpoint 1, " which should be followed by
- the location.
- 1 : Means we printed something, but there is no need
- to also print the location part of the message.
- An example is the catch/throw messages, which
- don't require a location appended to the end. */
+ ui_out_tuple_begin (uiout, "value");
+ ui_out_text (uiout, "\nValue = ");
+ value_print (bs->breakpoint_at->val, stb->stream, 0, Val_pretty_default);
+ ui_out_field_stream (uiout, "value", stb);
+ ui_out_tuple_end (uiout);
+ ui_out_text (uiout, "\n");
+ return PRINT_UNKNOWN;
+ break;
-int
-bpstat_print (bs)
- bpstat bs;
-{
- int val;
+ case bp_access_watchpoint:
+ if (bs->old_val != NULL)
+ {
+ annotate_watchpoint (bs->breakpoint_at->number);
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "access-watchpoint-trigger");
+ mention (bs->breakpoint_at);
+ ui_out_tuple_begin (uiout, "value");
+ ui_out_text (uiout, "\nOld value = ");
+ value_print (bs->old_val, stb->stream, 0, Val_pretty_default);
+ ui_out_field_stream (uiout, "old", stb);
+ value_free (bs->old_val);
+ bs->old_val = NULL;
+ ui_out_text (uiout, "\nNew value = ");
+ }
+ else
+ {
+ mention (bs->breakpoint_at);
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "access-watchpoint-trigger");
+ ui_out_tuple_begin (uiout, "value");
+ ui_out_text (uiout, "\nValue = ");
+ }
+ value_print (bs->breakpoint_at->val, stb->stream, 0,Val_pretty_default);
+ ui_out_field_stream (uiout, "new", stb);
+ ui_out_tuple_end (uiout);
+ ui_out_text (uiout, "\n");
+ return PRINT_UNKNOWN;
+ break;
- if (bs == NULL)
- return -1;
+ /* Fall through, we don't deal with these types of breakpoints
+ here. */
- val = (*bs->print_it) (bs);
- if (val >= 0)
- return val;
+ case bp_finish:
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "function-finished");
+ return PRINT_UNKNOWN;
+ break;
- /* Maybe another breakpoint in the chain caused us to stop.
- (Currently all watchpoints go on the bpstat whether hit or not.
- That probably could (should) be changed, provided care is taken
- with respect to bpstat_explains_signal). */
- if (bs->next)
- return bpstat_print (bs->next);
+ case bp_until:
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "location-reached");
+ return PRINT_UNKNOWN;
+ break;
- /* We reached the end of the chain without printing anything. */
- return -1;
+ case bp_none:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
+ default:
+ return PRINT_UNKNOWN;
+ }
+}
+
+/* Generic routine for printing messages indicating why we
+ stopped. The behavior of this function depends on the value
+ 'print_it' in the bpstat structure. Under some circumstances we
+ may decide not to print anything here and delegate the task to
+ normal_stop(). */
+
+static enum print_stop_action
+print_bp_stop_message (bpstat bs)
+{
+ switch (bs->print_it)
+ {
+ case print_it_noop:
+ /* Nothing should be printed for this bpstat entry. */
+ return PRINT_UNKNOWN;
+ break;
+
+ case print_it_done:
+ /* We still want to print the frame, but we already printed the
+ relevant messages. */
+ return PRINT_SRC_AND_LOC;
+ break;
+
+ case print_it_normal:
+ /* Normal case, we handle everything in print_it_typical. */
+ return print_it_typical (bs);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ "print_bp_stop_message: unrecognized enum value");
+ break;
+ }
+}
+
+/* Print a message indicating what happened. This is called from
+ normal_stop(). The input to this routine is the head of the bpstat
+ list - a list of the eventpoints that caused this stop. This
+ routine calls the generic print routine for printing a message
+ about reasons for stopping. This will print (for example) the
+ "Breakpoint n," part of the output. The return value of this
+ routine is one of:
+
+ PRINT_UNKNOWN: Means we printed nothing
+ PRINT_SRC_AND_LOC: Means we printed something, and expect subsequent
+ code to print the location. An example is
+ "Breakpoint 1, " which should be followed by
+ the location.
+ PRINT_SRC_ONLY: Means we printed something, but there is no need
+ to also print the location part of the message.
+ An example is the catch/throw messages, which
+ don't require a location appended to the end.
+ PRINT_NOTHING: We have done some printing and we don't need any
+ further info to be printed.*/
+
+enum print_stop_action
+bpstat_print (bpstat bs)
+{
+ int val;
+
+ /* Maybe another breakpoint in the chain caused us to stop.
+ (Currently all watchpoints go on the bpstat whether hit or not.
+ That probably could (should) be changed, provided care is taken
+ with respect to bpstat_explains_signal). */
+ for (; bs; bs = bs->next)
+ {
+ val = print_bp_stop_message (bs);
+ if (val == PRINT_SRC_ONLY
+ || val == PRINT_SRC_AND_LOC
+ || val == PRINT_NOTHING)
+ return val;
+ }
+
+ /* We reached the end of the chain, or we got a null BS to start
+ with and nothing was printed. */
+ return PRINT_UNKNOWN;
}
/* Evaluate the expression EXP and return 1 if value is zero.
make it pass through catch_errors. */
static int
-breakpoint_cond_eval (exp)
- PTR exp;
+breakpoint_cond_eval (PTR exp)
{
- value_ptr mark = value_mark ();
+ struct value *mark = value_mark ();
int i = !value_true (evaluate_expression ((struct expression *) exp));
value_free_to_mark (mark);
return i;
/* Allocate a new bpstat and chain it to the current one. */
static bpstat
-bpstat_alloc (b, cbs)
- register struct breakpoint *b;
- bpstat cbs; /* Current "bs" value */
+bpstat_alloc (struct breakpoint *b, bpstat cbs /* Current "bs" value */ )
{
bpstat bs;
/* Check watchpoint condition. */
static int
-watchpoint_check (p)
- PTR p;
+watchpoint_check (PTR p)
{
bpstat bs = (bpstat) p;
struct breakpoint *b;
any chance of handling watchpoints on local variables, we'll need
the frame chain (so we can determine if we're in scope). */
reinit_frame_cache ();
- fr = find_frame_addr_in_frame_chain (b->watchpoint_frame);
+ fr = frame_find_by_id (b->watchpoint_frame);
within_current_scope = (fr != NULL);
+ /* in_function_epilogue_p() returns a non-zero value if we're still
+ in the function but the stack frame has already been invalidated.
+ Since we can't rely on the values of local variables after the
+ stack has been destroyed, we are treating the watchpoint in that
+ state as `not changed' without further checking. */
+ if (within_current_scope && fr == get_current_frame ()
+ && gdbarch_in_function_epilogue_p (current_gdbarch, read_pc ()))
+ return WP_VALUE_NOT_CHANGED;
if (within_current_scope)
/* If we end up stopping, the current frame will get selected
in normal_stop. So this call to select_frame won't affect
the user. */
- select_frame (fr, -1);
+ select_frame (fr);
}
if (within_current_scope)
call free_all_values. We can't call free_all_values because
we might be in the middle of evaluating a function call. */
- value_ptr mark = value_mark ();
- value_ptr new_val = evaluate_expression (bs->breakpoint_at->exp);
+ struct value *mark = value_mark ();
+ struct value *new_val = evaluate_expression (bs->breakpoint_at->exp);
if (!value_equal (b->val, new_val))
{
release_value (new_val);
So we can't even detect the first assignment to it and
watch after that (since the garbage may or may not equal
the first value assigned). */
- printf_filtered ("\
-Watchpoint %d deleted because the program has left the block in\n\
-which its expression is valid.\n", bs->breakpoint_at->number);
+ /* We print all the stop information in print_it_typical(), but
+ in this case, by the time we call print_it_typical() this bp
+ will be deleted already. So we have no choice but print the
+ information here. */
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "reason", "watchpoint-scope");
+ ui_out_text (uiout, "\nWatchpoint ");
+ ui_out_field_int (uiout, "wpnum", bs->breakpoint_at->number);
+ ui_out_text (uiout, " deleted because the program has left the block in\n\
+which its expression is valid.\n");
+
if (b->related_breakpoint)
- b->related_breakpoint->disposition = del_at_next_stop;
- b->disposition = del_at_next_stop;
+ b->related_breakpoint->disposition = disp_del_at_next_stop;
+ b->disposition = disp_del_at_next_stop;
return WP_DELETED;
}
}
-/* This is used when everything which needs to be printed has
- already been printed. But we still want to print the frame. */
-
-/* Background: When we stop, bpstat_print() is called.
- It loops through the bpstat list of things causing this stop,
- calling the print_it function for each one. The default
- print_it function, used for breakpoints, is print_it_normal().
- Also see print_it_noop() and print_it_done() are the other
- two possibilities. See comments in bpstat_print() and
- in header of print_it_normal() for more detail. */
-
-static int
-print_it_done (bs)
- bpstat bs;
-{
- return 0;
-}
-
-/* This is used when nothing should be printed for this bpstat entry. */
-/* Background: When we stop, bpstat_print() is called.
- It loops through the bpstat list of things causing this stop,
- calling the print_it function for each one. The default
- print_it function, used for breakpoints, is print_it_normal().
- Also see print_it_noop() and print_it_done() are the other
- two possibilities. See comments in bpstat_print() and
- in header of print_it_normal() for more detail. */
-
-static int
-print_it_noop (bs)
- bpstat bs;
-{
- return -1;
-}
-
/* Get a bpstat associated with having just stopped at address *PC
and frame address CORE_ADDRESS. Update *PC to point at the
- breakpoint (if we hit a breakpoint). NOT_A_BREAKPOINT is nonzero
+ breakpoint (if we hit a breakpoint). NOT_A_SW_BREAKPOINT is nonzero
if this is known to not be a real breakpoint (it could still be a
watchpoint, though). */
commands, FIXME??? fields. */
bpstat
-bpstat_stop_status (pc, not_a_breakpoint)
- CORE_ADDR *pc;
- int not_a_breakpoint;
+bpstat_stop_status (CORE_ADDR *pc, int not_a_sw_breakpoint)
{
register struct breakpoint *b, *temp;
CORE_ADDR bp_addr;
"Error evaluating expression for watchpoint %d\n";
char message[sizeof (message1) + 30 /* slop */ ];
- /* Get the address where the breakpoint would have been. */
- bp_addr = *pc - (not_a_breakpoint && !SOFTWARE_SINGLE_STEP_P ?
- 0 : DECR_PC_AFTER_BREAK);
+ /* Get the address where the breakpoint would have been. The
+ "not_a_sw_breakpoint" argument is meant to distinguish between a
+ breakpoint trap event and a trace/singlestep trap event. For a
+ trace/singlestep trap event, we would not want to subtract
+ DECR_PC_AFTER_BREAK from the PC. */
+
+ bp_addr = *pc - (not_a_sw_breakpoint ? 0 : DECR_PC_AFTER_BREAK);
ALL_BREAKPOINTS_SAFE (b, temp)
{
- if (b->enable == disabled
- || b->enable == shlib_disabled
- || b->enable == call_disabled)
+ if (b->enable_state == bp_disabled
+ || b->enable_state == bp_shlib_disabled
+ || b->enable_state == bp_call_disabled)
continue;
if (b->type != bp_watchpoint
&& b->type != bp_catch_exec
&& b->type != bp_catch_catch
&& b->type != bp_catch_throw) /* a non-watchpoint bp */
- if (b->address != bp_addr || /* address doesn't match or */
- (overlay_debugging && /* overlay doesn't match */
- section_is_overlay (b->section) &&
- !section_is_mapped (b->section)))
- continue;
+ {
+ if (b->address != bp_addr) /* address doesn't match */
+ continue;
+ if (overlay_debugging /* unmapped overlay section */
+ && section_is_overlay (b->section)
+ && !section_is_mapped (b->section))
+ continue;
+ }
- if (b->type == bp_hardware_breakpoint
- && b->address != (*pc - DECR_PC_AFTER_HW_BREAK))
- continue;
+ if (b->type == bp_hardware_breakpoint)
+ {
+ if (b->address != (*pc - DECR_PC_AFTER_HW_BREAK))
+ continue;
+ if (overlay_debugging /* unmapped overlay section */
+ && section_is_overlay (b->section)
+ && !section_is_mapped (b->section))
+ continue;
+ }
/* Is this a catchpoint of a load or unload? If so, did we
get a load or unload of the specified library? If not,
ignore it. */
if ((b->type == bp_catch_load)
#if defined(SOLIB_HAVE_LOAD_EVENT)
- && (!SOLIB_HAVE_LOAD_EVENT (inferior_pid)
+ && (!SOLIB_HAVE_LOAD_EVENT (PIDGET (inferior_ptid))
|| ((b->dll_pathname != NULL)
&& (strcmp (b->dll_pathname,
- SOLIB_LOADED_LIBRARY_PATHNAME (inferior_pid))
+ SOLIB_LOADED_LIBRARY_PATHNAME (
+ PIDGET (inferior_ptid)))
!= 0)))
#endif
)
if ((b->type == bp_catch_unload)
#if defined(SOLIB_HAVE_UNLOAD_EVENT)
- && (!SOLIB_HAVE_UNLOAD_EVENT (inferior_pid)
+ && (!SOLIB_HAVE_UNLOAD_EVENT (PIDGET (inferior_ptid))
|| ((b->dll_pathname != NULL)
&& (strcmp (b->dll_pathname,
- SOLIB_UNLOADED_LIBRARY_PATHNAME (inferior_pid))
+ SOLIB_UNLOADED_LIBRARY_PATHNAME (
+ PIDGET (inferior_ptid)))
!= 0)))
#endif
)
continue;
if ((b->type == bp_catch_fork)
- && !target_has_forked (inferior_pid, &b->forked_inferior_pid))
+ && !target_has_forked (PIDGET (inferior_ptid),
+ &b->forked_inferior_pid))
continue;
if ((b->type == bp_catch_vfork)
- && !target_has_vforked (inferior_pid, &b->forked_inferior_pid))
+ && !target_has_vforked (PIDGET (inferior_ptid),
+ &b->forked_inferior_pid))
continue;
if ((b->type == bp_catch_exec)
- && !target_has_execd (inferior_pid, &b->exec_pathname))
+ && !target_has_execd (PIDGET (inferior_ptid), &b->exec_pathname))
continue;
if (ep_is_exception_catchpoint (b) &&
{
case WP_DELETED:
/* We've already printed what needs to be printed. */
+ /* Actually this is superfluous, because by the time we
+ call print_it_typical() the wp will be already deleted,
+ and the function will return immediately. */
bs->print_it = print_it_done;
/* Stop. */
break;
/* Don't stop. */
bs->print_it = print_it_noop;
bs->stop = 0;
- /* Don't consider this a hit. */
- --(b->hit_count);
continue;
default:
/* Can't happen. */
/* Error from catch_errors. */
printf_filtered ("Watchpoint %d deleted.\n", b->number);
if (b->related_breakpoint)
- b->related_breakpoint->disposition = del_at_next_stop;
- b->disposition = del_at_next_stop;
+ b->related_breakpoint->disposition = disp_del_at_next_stop;
+ b->disposition = disp_del_at_next_stop;
/* We've already printed what needs to be printed. */
bs->print_it = print_it_done;
b->type == bp_access_watchpoint)
{
CORE_ADDR addr;
- value_ptr v;
+ struct value *v;
int found = 0;
addr = target_stopped_data_address ();
continue;
for (v = b->val_chain; v; v = v->next)
{
- if (v->lval == lval_memory)
+ if (VALUE_LVAL (v) == lval_memory
+ && ! VALUE_LAZY (v))
{
- CORE_ADDR vaddr;
-
- vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
- /* Exact match not required. Within range is sufficient.
- */
- if (addr >= vaddr &&
- addr < vaddr + TYPE_LENGTH (VALUE_TYPE (v)))
- found = 1;
+ struct type *vtype = check_typedef (VALUE_TYPE (v));
+
+ if (v == b->val_chain
+ || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
+ && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
+ {
+ CORE_ADDR vaddr;
+
+ vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ /* Exact match not required. Within range is
+ sufficient. */
+ if (addr >= vaddr &&
+ addr < vaddr + TYPE_LENGTH (VALUE_TYPE (v)))
+ found = 1;
+ }
}
}
if (found)
/* Stop. */
break;
case WP_VALUE_CHANGED:
+ if (b->type == bp_read_watchpoint)
+ {
+ /* Don't stop: read watchpoints shouldn't fire if
+ the value has changed. This is for targets which
+ cannot set read-only watchpoints. */
+ bs->print_it = print_it_noop;
+ bs->stop = 0;
+ continue;
+ }
+ ++(b->hit_count);
+ break;
case WP_VALUE_NOT_CHANGED:
/* Stop. */
++(b->hit_count);
/* Error from catch_errors. */
printf_filtered ("Watchpoint %d deleted.\n", b->number);
if (b->related_breakpoint)
- b->related_breakpoint->disposition = del_at_next_stop;
- b->disposition = del_at_next_stop;
+ b->related_breakpoint->disposition = disp_del_at_next_stop;
+ b->disposition = disp_del_at_next_stop;
/* We've already printed what needs to be printed. */
bs->print_it = print_it_done;
break;
real_breakpoint = 1;
}
- if (b->frame && b->frame != (get_current_frame ())->frame &&
- (b->type == bp_step_resume &&
- (INNER_THAN (get_current_frame ()->frame, b->frame))))
+ if (b->frame &&
+ b->frame != (get_current_frame ())->frame)
bs->stop = 0;
else
{
{
/* Need to select the frame, with all that implies
so that the conditions will have the right context. */
- select_frame (get_current_frame (), 0);
+ select_frame (get_current_frame ());
value_is_zero
= catch_errors (breakpoint_cond_eval, (b->cond),
"Error in testing breakpoint condition:\n",
else if (b->ignore_count > 0)
{
b->ignore_count--;
+ annotate_ignore_count_change ();
bs->stop = 0;
}
else
{
/* We will stop here */
- if (b->disposition == disable)
- b->enable = disabled;
+ if (b->disposition == disp_disable)
+ b->enable_state = bp_disabled;
bs->commands = b->commands;
if (b->silent)
bs->print = 0;
\f
/* Tell what to do about this bpstat. */
struct bpstat_what
-bpstat_what (bs)
- bpstat bs;
+bpstat_what (bpstat bs)
{
/* Classify each bpstat as one of the following. */
enum class
back and decide something of a lower priority is better. The
ordering is:
- kc < clr sgl shl slr sn sr ss ts
+ kc < clr sgl shl shlr slr sn sr ss ts
sgl < clrs shl shlr slr sn sr ss ts
slr < err shl shlr sn sr ss ts
clr < clrs err shl shlr sn sr ss ts
/* step_resume entries: a step resume breakpoint overrides another
breakpoint of signal handling (see comment in wait_for_inferior
- at first IN_SIGTRAMP where we set the step_resume breakpoint). */
+ at first PC_IN_SIGTRAMP where we set the step_resume breakpoint). */
/* We handle the through_sigtramp_breakpoint the same way; having both
one of those and a step_resume_breakpoint is probably very rare (?). */
/*bp_noisy */
{sn, sn, sn, sn, sn, sn, sn, sr, ts, shl, shlr},
/*long_jump */
- {slr, ss, sn, slr, err, err, err, sr, ts, shl, shlr},
+ {slr, ss, sn, slr, slr, err, err, sr, ts, shl, shlr},
/*long_resume */
{clr, ss, sn, clrs, err, err, err, sr, ts, shl, shlr},
/*step_resume */
case bp_shlib_event:
bs_class = shlib_event;
break;
+ case bp_thread_event:
+ case bp_overlay_event:
+ bs_class = bp_nostop;
+ break;
case bp_catch_load:
case bp_catch_unload:
/* Only if this catchpoint triggered should we cause the
just to things like whether watchpoints are set. */
int
-bpstat_should_step ()
+bpstat_should_step (void)
{
struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if (b->enable == enabled && b->type == bp_watchpoint)
- return 1;
+ if (b->enable_state == bp_enabled && b->type == bp_watchpoint)
+ return 1;
return 0;
}
/* Nonzero if there are enabled hardware watchpoints. */
int
-bpstat_have_active_hw_watchpoints ()
+bpstat_have_active_hw_watchpoints (void)
{
struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if ((b->enable == enabled) &&
+ if ((b->enable_state == bp_enabled) &&
(b->inserted) &&
((b->type == bp_hardware_watchpoint) ||
(b->type == bp_read_watchpoint) ||
(b->type == bp_access_watchpoint)))
- return 1;
+ return 1;
return 0;
}
\f
function returns another bpstat which contains only the catchpoints
on that first list, if any. */
void
-bpstat_get_triggered_catchpoints (ep_list, cp_list)
- bpstat ep_list;
- bpstat *cp_list;
+bpstat_get_triggered_catchpoints (bpstat ep_list, bpstat *cp_list)
{
struct bpstats root_bs[1];
bpstat bs = root_bs;
catchpoint triggers. Clients who may wish to know the name
later must get it from the catchpoint itself.) */
if (ep->triggered_dll_pathname != NULL)
- free (ep->triggered_dll_pathname);
+ xfree (ep->triggered_dll_pathname);
if (ep->type == bp_catch_load)
- dll_pathname = SOLIB_LOADED_LIBRARY_PATHNAME (inferior_pid);
+ dll_pathname = SOLIB_LOADED_LIBRARY_PATHNAME (
+ PIDGET (inferior_ptid));
else
- dll_pathname = SOLIB_UNLOADED_LIBRARY_PATHNAME (inferior_pid);
+ dll_pathname = SOLIB_UNLOADED_LIBRARY_PATHNAME (
+ PIDGET (inferior_ptid));
#else
dll_pathname = NULL;
#endif
*cp_list = bs;
}
-/* Print information on breakpoint number BNUM, or -1 if all.
- If WATCHPOINTS is zero, process only breakpoints; if WATCHPOINTS
- is nonzero, process only watchpoints. */
-
-typedef struct
-{
- enum bptype type;
- char *description;
-}
-ep_type_description_t;
-
+/* Print B to gdb_stdout. */
static void
-breakpoint_1 (bnum, allflag)
- int bnum;
- int allflag;
+print_one_breakpoint (struct breakpoint *b,
+ CORE_ADDR *last_addr)
{
- register struct breakpoint *b;
register struct command_line *l;
register struct symbol *sym;
- CORE_ADDR last_addr = (CORE_ADDR) -1;
- int found_a_breakpoint = 0;
- static ep_type_description_t bptypes[] =
+ struct ep_type_description
+ {
+ enum bptype type;
+ char *description;
+ };
+ static struct ep_type_description bptypes[] =
{
{bp_none, "?deleted?"},
{bp_breakpoint, "breakpoint"},
{bp_watchpoint_scope, "watchpoint scope"},
{bp_call_dummy, "call dummy"},
{bp_shlib_event, "shlib events"},
+ {bp_thread_event, "thread events"},
+ {bp_overlay_event, "overlay events"},
{bp_catch_load, "catch load"},
{bp_catch_unload, "catch unload"},
{bp_catch_fork, "catch fork"},
{bp_catch_catch, "catch catch"},
{bp_catch_throw, "catch throw"}
};
-
+
static char *bpdisps[] =
{"del", "dstp", "dis", "keep"};
static char bpenables[] = "nynny";
char wrap_indent[80];
-
-
-
- ALL_BREAKPOINTS (b)
- if (bnum == -1
- || bnum == b->number)
+ struct ui_stream *stb = ui_out_stream_new (uiout);
+ struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb);
+
+ annotate_record ();
+ ui_out_tuple_begin (uiout, "bkpt");
+
+ /* 1 */
+ annotate_field (0);
+ ui_out_field_int (uiout, "number", b->number);
+
+ /* 2 */
+ annotate_field (1);
+ if (((int) b->type > (sizeof (bptypes) / sizeof (bptypes[0])))
+ || ((int) b->type != bptypes[(int) b->type].type))
+ internal_error (__FILE__, __LINE__,
+ "bptypes table does not describe type #%d.",
+ (int) b->type);
+ ui_out_field_string (uiout, "type", bptypes[(int) b->type].description);
+
+ /* 3 */
+ annotate_field (2);
+ ui_out_field_string (uiout, "disp", bpdisps[(int) b->disposition]);
+
+ /* 4 */
+ annotate_field (3);
+ ui_out_field_fmt (uiout, "enabled", "%c", bpenables[(int) b->enable_state]);
+ ui_out_spaces (uiout, 2);
+
+ /* 5 and 6 */
+ strcpy (wrap_indent, " ");
+ if (addressprint)
+ {
+ if (TARGET_ADDR_BIT <= 32)
+ strcat (wrap_indent, " ");
+ else
+ strcat (wrap_indent, " ");
+ }
+ switch (b->type)
{
-/* We only print out user settable breakpoints unless the allflag is set. */
- if (!allflag
- && b->type != bp_breakpoint
- && b->type != bp_catch_load
- && b->type != bp_catch_unload
- && b->type != bp_catch_fork
- && b->type != bp_catch_vfork
- && b->type != bp_catch_exec
- && b->type != bp_catch_catch
- && b->type != bp_catch_throw
- && b->type != bp_hardware_breakpoint
- && b->type != bp_watchpoint
- && b->type != bp_read_watchpoint
- && b->type != bp_access_watchpoint
- && b->type != bp_hardware_watchpoint)
- continue;
+ case bp_none:
+ internal_error (__FILE__, __LINE__,
+ "print_one_breakpoint: bp_none encountered\n");
+ break;
- if (!found_a_breakpoint++)
+ case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "what", stb);
+ break;
+
+ case bp_catch_load:
+ case bp_catch_unload:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ if (b->dll_pathname == NULL)
{
- annotate_breakpoints_headers ();
-
- annotate_field (0);
- printf_filtered ("Num ");
- annotate_field (1);
- printf_filtered ("Type ");
- annotate_field (2);
- printf_filtered ("Disp ");
- annotate_field (3);
- printf_filtered ("Enb ");
- if (addressprint)
- {
- annotate_field (4);
- printf_filtered ("Address ");
- }
- annotate_field (5);
- printf_filtered ("What\n");
-
- annotate_breakpoints_table ();
+ ui_out_field_string (uiout, "what", "<any library>");
+ ui_out_spaces (uiout, 1);
}
-
- annotate_record ();
- annotate_field (0);
- printf_filtered ("%-3d ", b->number);
- annotate_field (1);
- if ((int) b->type > (sizeof (bptypes) / sizeof (bptypes[0])))
- error ("bptypes table does not describe type #%d.", (int) b->type);
- if ((int) b->type != bptypes[(int) b->type].type)
- error ("bptypes table does not describe type #%d?", (int) b->type);
- printf_filtered ("%-14s ", bptypes[(int) b->type].description);
- annotate_field (2);
- printf_filtered ("%-4s ", bpdisps[(int) b->disposition]);
- annotate_field (3);
- printf_filtered ("%-3c ", bpenables[(int) b->enable]);
-
- strcpy (wrap_indent, " ");
+ else
+ {
+ ui_out_text (uiout, "library \"");
+ ui_out_field_string (uiout, "what", b->dll_pathname);
+ ui_out_text (uiout, "\" ");
+ }
+ break;
+
+ case bp_catch_fork:
+ case bp_catch_vfork:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
if (addressprint)
- strcat (wrap_indent, " ");
- switch (b->type)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ if (b->forked_inferior_pid != 0)
{
- case bp_watchpoint:
- case bp_hardware_watchpoint:
- case bp_read_watchpoint:
- case bp_access_watchpoint:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- annotate_field (5);
- print_expression (b->exp, gdb_stdout);
- break;
-
- case bp_catch_load:
- case bp_catch_unload:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- annotate_field (5);
- if (b->dll_pathname == NULL)
- printf_filtered ("<any library> ");
- else
- printf_filtered ("library \"%s\" ", b->dll_pathname);
- break;
-
- case bp_catch_fork:
- case bp_catch_vfork:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- annotate_field (5);
- if (b->forked_inferior_pid != 0)
- printf_filtered ("process %d ", b->forked_inferior_pid);
- break;
-
- case bp_catch_exec:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- annotate_field (5);
- if (b->exec_pathname != NULL)
- printf_filtered ("program \"%s\" ", b->exec_pathname);
- break;
- case bp_catch_catch:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- annotate_field (5);
- printf_filtered ("exception catch ");
- break;
- case bp_catch_throw:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- annotate_field (5);
- printf_filtered ("exception throw ");
- break;
-
- case bp_breakpoint:
- case bp_hardware_breakpoint:
- case bp_until:
- case bp_finish:
- case bp_longjmp:
- case bp_longjmp_resume:
- case bp_step_resume:
- case bp_through_sigtramp:
- case bp_watchpoint_scope:
- case bp_call_dummy:
- case bp_shlib_event:
- if (addressprint)
- {
- annotate_field (4);
- /* FIXME-32x64: need a print_address_numeric with
- field width */
- printf_filtered
- ("%s ",
- local_hex_string_custom
- ((unsigned long) b->address, "08l"));
- }
+ ui_out_text (uiout, "process ");
+ ui_out_field_int (uiout, "what", b->forked_inferior_pid);
+ ui_out_spaces (uiout, 1);
+ }
+
+ case bp_catch_exec:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ if (b->exec_pathname != NULL)
+ {
+ ui_out_text (uiout, "program \"");
+ ui_out_field_string (uiout, "what", b->exec_pathname);
+ ui_out_text (uiout, "\" ");
+ }
+ break;
- annotate_field (5);
+ case bp_catch_catch:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ ui_out_field_string (uiout, "what", "exception catch");
+ ui_out_spaces (uiout, 1);
+ break;
- last_addr = b->address;
- if (b->source_file)
+ case bp_catch_throw:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ ui_out_field_string (uiout, "what", "exception throw");
+ ui_out_spaces (uiout, 1);
+ break;
+
+ case bp_breakpoint:
+ case bp_hardware_breakpoint:
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
+ case bp_shlib_event:
+ case bp_thread_event:
+ case bp_overlay_event:
+ if (addressprint)
+ {
+ annotate_field (4);
+ ui_out_field_core_addr (uiout, "addr", b->address);
+ }
+ annotate_field (5);
+ *last_addr = b->address;
+ if (b->source_file)
+ {
+ sym = find_pc_sect_function (b->address, b->section);
+ if (sym)
{
- sym = find_pc_sect_function (b->address, b->section);
- if (sym)
- {
- fputs_filtered ("in ", gdb_stdout);
- fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
- wrap_here (wrap_indent);
- fputs_filtered (" at ", gdb_stdout);
- }
- fputs_filtered (b->source_file, gdb_stdout);
- printf_filtered (":%d", b->line_number);
+ ui_out_text (uiout, "in ");
+ ui_out_field_string (uiout, "func",
+ SYMBOL_SOURCE_NAME (sym));
+ ui_out_wrap_hint (uiout, wrap_indent);
+ ui_out_text (uiout, " at ");
}
- else
- print_address_symbolic (b->address, gdb_stdout, demangle, " ");
- break;
+ ui_out_field_string (uiout, "file", b->source_file);
+ ui_out_text (uiout, ":");
+ ui_out_field_int (uiout, "line", b->line_number);
}
-
- if (b->thread != -1)
- printf_filtered (" thread %d", b->thread);
-
- printf_filtered ("\n");
-
- if (b->frame)
+ else
{
- annotate_field (6);
-
- printf_filtered ("\tstop only in stack frame at ");
- print_address_numeric (b->frame, 1, gdb_stdout);
- printf_filtered ("\n");
+ print_address_symbolic (b->address, stb->stream, demangle, "");
+ ui_out_field_stream (uiout, "at", stb);
}
+ break;
+ }
+
+ if (b->thread != -1)
+ {
+ /* FIXME: This seems to be redundant and lost here; see the
+ "stop only in" line a little further down. */
+ ui_out_text (uiout, " thread ");
+ ui_out_field_int (uiout, "thread", b->thread);
+ }
+
+ ui_out_text (uiout, "\n");
+
+ if (b->frame)
+ {
+ annotate_field (6);
+ ui_out_text (uiout, "\tstop only in stack frame at ");
+ ui_out_field_core_addr (uiout, "frame", b->frame);
+ ui_out_text (uiout, "\n");
+ }
+
+ if (b->cond)
+ {
+ annotate_field (7);
+ ui_out_text (uiout, "\tstop only if ");
+ print_expression (b->cond, stb->stream);
+ ui_out_field_stream (uiout, "cond", stb);
+ ui_out_text (uiout, "\n");
+ }
+
+ if (b->thread != -1)
+ {
+ /* FIXME should make an annotation for this */
+ ui_out_text (uiout, "\tstop only in thread ");
+ ui_out_field_int (uiout, "thread", b->thread);
+ ui_out_text (uiout, "\n");
+ }
+
+ if (show_breakpoint_hit_counts && b->hit_count)
+ {
+ /* FIXME should make an annotation for this */
+ if (ep_is_catchpoint (b))
+ ui_out_text (uiout, "\tcatchpoint");
+ else
+ ui_out_text (uiout, "\tbreakpoint");
+ ui_out_text (uiout, " already hit ");
+ ui_out_field_int (uiout, "times", b->hit_count);
+ if (b->hit_count == 1)
+ ui_out_text (uiout, " time\n");
+ else
+ ui_out_text (uiout, " times\n");
+ }
+
+ /* Output the count also if it is zero, but only if this is
+ mi. FIXME: Should have a better test for this. */
+ if (ui_out_is_mi_like_p (uiout))
+ if (show_breakpoint_hit_counts && b->hit_count == 0)
+ ui_out_field_int (uiout, "times", b->hit_count);
- if (b->cond)
- {
- annotate_field (7);
+ if (b->ignore_count)
+ {
+ annotate_field (8);
+ ui_out_text (uiout, "\tignore next ");
+ ui_out_field_int (uiout, "ignore", b->ignore_count);
+ ui_out_text (uiout, " hits\n");
+ }
+
+ if ((l = b->commands))
+ {
+ annotate_field (9);
+ ui_out_tuple_begin (uiout, "script");
+ print_command_lines (uiout, l, 4);
+ ui_out_tuple_end (uiout);
+ }
+ ui_out_tuple_end (uiout);
+ do_cleanups (old_chain);
+}
- printf_filtered ("\tstop only if ");
- print_expression (b->cond, gdb_stdout);
- printf_filtered ("\n");
- }
+struct captured_breakpoint_query_args
+ {
+ int bnum;
+ };
- if (b->thread != -1)
+static int
+do_captured_breakpoint_query (struct ui_out *uiout, void *data)
+{
+ struct captured_breakpoint_query_args *args = data;
+ register struct breakpoint *b;
+ CORE_ADDR dummy_addr = 0;
+ ALL_BREAKPOINTS (b)
+ {
+ if (args->bnum == b->number)
{
- /* FIXME should make an annotation for this */
- printf_filtered ("\tstop only in thread %d\n", b->thread);
+ print_one_breakpoint (b, &dummy_addr);
+ return GDB_RC_OK;
}
+ }
+ return GDB_RC_NONE;
+}
- if (show_breakpoint_hit_counts && b->hit_count)
- {
- /* FIXME should make an annotation for this */
- if (ep_is_catchpoint (b))
- printf_filtered ("\tcatchpoint");
- else
- printf_filtered ("\tbreakpoint");
- printf_filtered (" already hit %d time%s\n",
- b->hit_count, (b->hit_count == 1 ? "" : "s"));
- }
+enum gdb_rc
+gdb_breakpoint_query (struct ui_out *uiout, int bnum)
+{
+ struct captured_breakpoint_query_args args;
+ args.bnum = bnum;
+ /* For the moment we don't trust print_one_breakpoint() to not throw
+ an error. */
+ return catch_exceptions (uiout, do_captured_breakpoint_query, &args,
+ NULL, RETURN_MASK_ALL);
+}
- if (b->ignore_count)
- {
- annotate_field (8);
+/* Return non-zero if B is user settable (breakpoints, watchpoints,
+ catchpoints, et.al.). */
- printf_filtered ("\tignore next %d hits\n", b->ignore_count);
- }
+static int
+user_settable_breakpoint (const struct breakpoint *b)
+{
+ return (b->type == bp_breakpoint
+ || b->type == bp_catch_load
+ || b->type == bp_catch_unload
+ || b->type == bp_catch_fork
+ || b->type == bp_catch_vfork
+ || b->type == bp_catch_exec
+ || b->type == bp_catch_catch
+ || b->type == bp_catch_throw
+ || b->type == bp_hardware_breakpoint
+ || b->type == bp_watchpoint
+ || b->type == bp_read_watchpoint
+ || b->type == bp_access_watchpoint
+ || b->type == bp_hardware_watchpoint);
+}
+
+/* Print information on user settable breakpoint (watchpoint, etc)
+ number BNUM. If BNUM is -1 print all user settable breakpoints.
+ If ALLFLAG is non-zero, include non- user settable breakpoints. */
- if ((l = b->commands))
- {
- annotate_field (9);
+static void
+breakpoint_1 (int bnum, int allflag)
+{
+ register struct breakpoint *b;
+ CORE_ADDR last_addr = (CORE_ADDR) -1;
+ int nr_printable_breakpoints;
+
+ /* Compute the number of rows in the table. */
+ nr_printable_breakpoints = 0;
+ ALL_BREAKPOINTS (b)
+ if (bnum == -1
+ || bnum == b->number)
+ {
+ if (allflag || user_settable_breakpoint (b))
+ nr_printable_breakpoints++;
+ }
- while (l)
- {
- print_command_line (l, 4, gdb_stdout);
- l = l->next;
- }
+ if (addressprint)
+ ui_out_table_begin (uiout, 6, nr_printable_breakpoints, "BreakpointTable");
+ else
+ ui_out_table_begin (uiout, 5, nr_printable_breakpoints, "BreakpointTable");
+
+ if (nr_printable_breakpoints > 0)
+ annotate_breakpoints_headers ();
+ if (nr_printable_breakpoints > 0)
+ annotate_field (0);
+ ui_out_table_header (uiout, 3, ui_left, "number", "Num"); /* 1 */
+ if (nr_printable_breakpoints > 0)
+ annotate_field (1);
+ ui_out_table_header (uiout, 14, ui_left, "type", "Type"); /* 2 */
+ if (nr_printable_breakpoints > 0)
+ annotate_field (2);
+ ui_out_table_header (uiout, 4, ui_left, "disp", "Disp"); /* 3 */
+ if (nr_printable_breakpoints > 0)
+ annotate_field (3);
+ ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb"); /* 4 */
+ if (addressprint)
+ {
+ if (nr_printable_breakpoints > 0)
+ annotate_field (4);
+ if (TARGET_ADDR_BIT <= 32)
+ ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */
+ else
+ ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */
}
- }
+ if (nr_printable_breakpoints > 0)
+ annotate_field (5);
+ ui_out_table_header (uiout, 40, ui_noalign, "what", "What"); /* 6 */
+ ui_out_table_body (uiout);
+ if (nr_printable_breakpoints > 0)
+ annotate_breakpoints_table ();
- if (!found_a_breakpoint)
+ ALL_BREAKPOINTS (b)
+ if (bnum == -1
+ || bnum == b->number)
+ {
+ /* We only print out user settable breakpoints unless the
+ allflag is set. */
+ if (allflag || user_settable_breakpoint (b))
+ print_one_breakpoint (b, &last_addr);
+ }
+
+ ui_out_table_end (uiout);
+
+ if (nr_printable_breakpoints == 0)
{
if (bnum == -1)
- printf_filtered ("No breakpoints or watchpoints.\n");
+ ui_out_message (uiout, 0, "No breakpoints or watchpoints.\n");
else
- printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+ ui_out_message (uiout, 0, "No breakpoint or watchpoint number %d.\n",
+ bnum);
}
else
- /* Compare against (CORE_ADDR)-1 in case some compiler decides
- that a comparison of an unsigned with -1 is always false. */
- if (last_addr != (CORE_ADDR) -1)
- set_next_address (last_addr);
+ {
+ /* Compare against (CORE_ADDR)-1 in case some compiler decides
+ that a comparison of an unsigned with -1 is always false. */
+ if (last_addr != (CORE_ADDR) -1)
+ set_next_address (last_addr);
+ }
+ /* FIXME? Should this be moved up so that it is only called when
+ there have been breakpoints? */
annotate_breakpoints_table_end ();
}
/* ARGSUSED */
static void
-breakpoints_info (bnum_exp, from_tty)
- char *bnum_exp;
- int from_tty;
+breakpoints_info (char *bnum_exp, int from_tty)
{
int bnum = -1;
if (bnum_exp)
- bnum = parse_and_eval_address (bnum_exp);
+ bnum = parse_and_eval_long (bnum_exp);
breakpoint_1 (bnum, 0);
}
/* ARGSUSED */
static void
-maintenance_info_breakpoints (bnum_exp, from_tty)
- char *bnum_exp;
- int from_tty;
+maintenance_info_breakpoints (char *bnum_exp, int from_tty)
{
int bnum = -1;
if (bnum_exp)
- bnum = parse_and_eval_address (bnum_exp);
+ bnum = parse_and_eval_long (bnum_exp);
breakpoint_1 (bnum, 1);
}
/* Print a message describing any breakpoints set at PC. */
static void
-describe_other_breakpoints (pc, section)
- CORE_ADDR pc;
- asection *section;
+describe_other_breakpoints (CORE_ADDR pc, asection *section)
{
register int others = 0;
register struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if (b->address == pc)
- if (overlay_debugging == 0 ||
- b->section == section)
- others++;
+ if (b->address == pc) /* address match / overlay match */
+ if (!overlay_debugging || b->section == section)
+ others++;
if (others > 0)
{
printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
ALL_BREAKPOINTS (b)
- if (b->address == pc)
- if (overlay_debugging == 0 ||
- b->section == section)
- {
- others--;
- printf_filtered
- ("%d%s%s ",
- b->number,
- ((b->enable == disabled ||
- b->enable == shlib_disabled ||
- b->enable == call_disabled) ? " (disabled)"
- : b->enable == permanent ? " (permanent)"
- : ""),
- (others > 1) ? "," : ((others == 1) ? " and" : ""));
- }
+ if (b->address == pc) /* address match / overlay match */
+ if (!overlay_debugging || b->section == section)
+ {
+ others--;
+ printf_filtered ("%d%s%s ",
+ b->number,
+ ((b->enable_state == bp_disabled ||
+ b->enable_state == bp_shlib_disabled ||
+ b->enable_state == bp_call_disabled)
+ ? " (disabled)"
+ : b->enable_state == bp_permanent
+ ? " (permanent)"
+ : ""),
+ (others > 1) ? ","
+ : ((others == 1) ? " and" : ""));
+ }
printf_filtered ("also set at pc ");
print_address_numeric (pc, 1, gdb_stdout);
printf_filtered (".\n");
for the `break' command with no arguments. */
void
-set_default_breakpoint (valid, addr, symtab, line)
- int valid;
- CORE_ADDR addr;
- struct symtab *symtab;
- int line;
+set_default_breakpoint (int valid, CORE_ADDR addr, struct symtab *symtab,
+ int line)
{
default_breakpoint_valid = valid;
default_breakpoint_address = addr;
default_breakpoint_line = line;
}
-/* Rescan breakpoints at address ADDRESS,
+/* Return true iff it is meaningful to use the address member of
+ BPT. For some breakpoint types, the address member is irrelevant
+ and it makes no sense to attempt to compare it to other addresses
+ (or use it for any other purpose either).
+
+ More specifically, each of the following breakpoint types will always
+ have a zero valued address and we don't want check_duplicates() to mark
+ breakpoints of any of these types to be a duplicate of an actual
+ breakpoint at address zero:
+
+ bp_watchpoint
+ bp_hardware_watchpoint
+ bp_read_watchpoint
+ bp_access_watchpoint
+ bp_catch_exec
+ bp_longjmp_resume
+ bp_catch_fork
+ bp_catch_vork */
+
+static int
+breakpoint_address_is_meaningful (struct breakpoint *bpt)
+{
+ enum bptype type = bpt->type;
+
+ return (type != bp_watchpoint
+ && type != bp_hardware_watchpoint
+ && type != bp_read_watchpoint
+ && type != bp_access_watchpoint
+ && type != bp_catch_exec
+ && type != bp_longjmp_resume
+ && type != bp_catch_fork
+ && type != bp_catch_vfork);
+}
+
+/* Rescan breakpoints at the same address and section as BPT,
marking the first one as "first" and any others as "duplicates".
This is so that the bpt instruction is only inserted once.
- If we have a permanent breakpoint at ADDRESS, make that one
- the official one, and the rest as duplicates. */
+ If we have a permanent breakpoint at the same place as BPT, make
+ that one the official one, and the rest as duplicates. */
static void
-check_duplicates (address, section)
- CORE_ADDR address;
- asection *section;
+check_duplicates (struct breakpoint *bpt)
{
register struct breakpoint *b;
register int count = 0;
struct breakpoint *perm_bp = 0;
+ CORE_ADDR address = bpt->address;
+ asection *section = bpt->section;
- if (address == 0) /* Watchpoints are uninteresting */
+ if (! breakpoint_address_is_meaningful (bpt))
return;
ALL_BREAKPOINTS (b)
- if (b->enable != disabled
- && b->enable != shlib_disabled
- && b->enable != call_disabled
- && b->address == address
- && (overlay_debugging == 0 || b->section == section))
+ if (b->enable_state != bp_disabled
+ && b->enable_state != bp_shlib_disabled
+ && b->enable_state != bp_call_disabled
+ && b->address == address /* address / overlay match */
+ && (!overlay_debugging || b->section == section)
+ && breakpoint_address_is_meaningful (b))
{
/* Have we found a permanent breakpoint? */
- if (b->enable == permanent)
+ if (b->enable_state == bp_permanent)
{
perm_bp = b;
break;
/* Permanent breakpoint should always be inserted. */
if (! perm_bp->inserted)
- internal_error ("allegedly permanent breakpoint is not "
+ internal_error (__FILE__, __LINE__,
+ "allegedly permanent breakpoint is not "
"actually inserted");
ALL_BREAKPOINTS (b)
if (b != perm_bp)
{
if (b->inserted)
- internal_error ("another breakpoint was inserted on top of "
+ internal_error (__FILE__, __LINE__,
+ "another breakpoint was inserted on top of "
"a permanent breakpoint");
- if (b->enable != disabled
- && b->enable != shlib_disabled
- && b->enable != call_disabled
- && b->address == address
- && (overlay_debugging == 0 || b->section == section))
+ if (b->enable_state != bp_disabled
+ && b->enable_state != bp_shlib_disabled
+ && b->enable_state != bp_call_disabled
+ && b->address == address /* address / overlay match */
+ && (!overlay_debugging || b->section == section)
+ && breakpoint_address_is_meaningful (b))
b->duplicate = 1;
}
}
}
-/* Low level routine to set a breakpoint.
- Takes as args the three things that every breakpoint must have.
- Returns the breakpoint object so caller can set other things.
- Does not set the breakpoint number!
- Does not print anything.
+/* set_raw_breakpoint() is a low level routine for allocating and
+ partially initializing a breakpoint of type BPTYPE. The newly
+ created breakpoint's address, section, source file name, and line
+ number are provided by SAL. The newly created and partially
+ initialized breakpoint is added to the breakpoint chain and
+ is also returned as the value of this function.
- ==> This routine should not be called if there is a chance of later
- error(); otherwise it leaves a bogus breakpoint on the chain. Validate
- your arguments BEFORE calling this routine! */
+ It is expected that the caller will complete the initialization of
+ the newly created breakpoint struct as well as output any status
+ information regarding the creation of a new breakpoint. In
+ particular, set_raw_breakpoint() does NOT set the breakpoint
+ number! Care should be taken to not allow an error() to occur
+ prior to completing the initialization of the breakpoint. If this
+ should happen, a bogus breakpoint will be left on the chain. */
struct breakpoint *
-set_raw_breakpoint (sal)
- struct symtab_and_line sal;
+set_raw_breakpoint (struct symtab_and_line sal, enum bptype bptype)
{
register struct breakpoint *b, *b1;
b->source_file = savestring (sal.symtab->filename,
strlen (sal.symtab->filename));
b->section = sal.section;
+ b->type = bptype;
b->language = current_language->la_language;
b->input_radix = input_radix;
b->thread = -1;
b->line_number = sal.line;
- b->enable = enabled;
+ b->enable_state = bp_enabled;
b->next = 0;
b->silent = 0;
b->ignore_count = 0;
b1->next = b;
}
- check_duplicates (sal.pc, sal.section);
+ check_duplicates (b);
breakpoints_changed ();
return b;
void
make_breakpoint_permanent (struct breakpoint *b)
{
- b->enable = permanent;
+ b->enable_state = bp_permanent;
/* By definition, permanent breakpoints are already present in the code. */
b->inserted = 1;
}
-#ifdef GET_LONGJMP_TARGET
-
-static void
-create_longjmp_breakpoint (func_name)
- char *func_name;
+static struct breakpoint *
+create_internal_breakpoint (CORE_ADDR address, enum bptype type)
{
+ static int internal_breakpoint_number = -1;
struct symtab_and_line sal;
struct breakpoint *b;
INIT_SAL (&sal); /* initialize to zeroes */
- if (func_name != NULL)
- {
- struct minimal_symbol *m;
- m = lookup_minimal_symbol_text (func_name, NULL,
- (struct objfile *) NULL);
- if (m)
- sal.pc = SYMBOL_VALUE_ADDRESS (m);
- else
+ sal.pc = address;
+ sal.section = find_pc_overlay (sal.pc);
+
+ b = set_raw_breakpoint (sal, type);
+ b->number = internal_breakpoint_number--;
+ b->disposition = disp_donttouch;
+
+ return b;
+}
+
+
+static void
+create_longjmp_breakpoint (char *func_name)
+{
+ struct breakpoint *b;
+ struct minimal_symbol *m;
+
+ if (func_name == NULL)
+ b = create_internal_breakpoint (0, bp_longjmp_resume);
+ else
+ {
+ if ((m = lookup_minimal_symbol_text (func_name, NULL, NULL)) == NULL)
return;
+
+ b = create_internal_breakpoint (SYMBOL_VALUE_ADDRESS (m), bp_longjmp);
}
- sal.section = find_pc_overlay (sal.pc);
- b = set_raw_breakpoint (sal);
- if (!b)
- return;
- b->type = func_name != NULL ? bp_longjmp : bp_longjmp_resume;
- b->disposition = donttouch;
- b->enable = disabled;
+ b->enable_state = bp_disabled;
b->silent = 1;
if (func_name)
- b->addr_string = strsave (func_name);
- b->number = internal_breakpoint_number--;
+ b->addr_string = xstrdup (func_name);
}
-#endif /* #ifdef GET_LONGJMP_TARGET */
-
/* Call this routine when stepping and nexting to enable a breakpoint
if we do a longjmp(). When we hit that breakpoint, call
set_longjmp_resume_breakpoint() to figure out where we are going. */
void
-enable_longjmp_breakpoint ()
+enable_longjmp_breakpoint (void)
{
register struct breakpoint *b;
ALL_BREAKPOINTS (b)
if (b->type == bp_longjmp)
{
- b->enable = enabled;
- check_duplicates (b->address, b->section);
+ b->enable_state = bp_enabled;
+ check_duplicates (b);
}
}
void
-disable_longjmp_breakpoint ()
+disable_longjmp_breakpoint (void)
{
register struct breakpoint *b;
if (b->type == bp_longjmp
|| b->type == bp_longjmp_resume)
{
- b->enable = disabled;
- check_duplicates (b->address, b->section);
+ b->enable_state = bp_disabled;
+ check_duplicates (b);
+ }
+}
+
+static void
+create_overlay_event_breakpoint (char *func_name)
+{
+ struct breakpoint *b;
+ struct minimal_symbol *m;
+
+ if ((m = lookup_minimal_symbol_text (func_name, NULL, NULL)) == NULL)
+ return;
+
+ b = create_internal_breakpoint (SYMBOL_VALUE_ADDRESS (m),
+ bp_overlay_event);
+ b->addr_string = xstrdup (func_name);
+
+ if (overlay_debugging == ovly_auto)
+ {
+ b->enable_state = bp_enabled;
+ overlay_events_enabled = 1;
+ }
+ else
+ {
+ b->enable_state = bp_disabled;
+ overlay_events_enabled = 0;
+ }
+}
+
+void
+enable_overlay_breakpoints (void)
+{
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if (b->type == bp_overlay_event)
+ {
+ b->enable_state = bp_enabled;
+ check_duplicates (b);
+ overlay_events_enabled = 1;
+ }
+}
+
+void
+disable_overlay_breakpoints (void)
+{
+ register struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ if (b->type == bp_overlay_event)
+ {
+ b->enable_state = bp_disabled;
+ check_duplicates (b);
+ overlay_events_enabled = 0;
}
}
+struct breakpoint *
+create_thread_event_breakpoint (CORE_ADDR address)
+{
+ struct breakpoint *b;
+ char addr_string[80]; /* Surely an addr can't be longer than that. */
+
+ b = create_internal_breakpoint (address, bp_thread_event);
+
+ b->enable_state = bp_enabled;
+ /* addr_string has to be used or breakpoint_re_set will delete me. */
+ sprintf (addr_string, "*0x%s", paddr (b->address));
+ b->addr_string = xstrdup (addr_string);
+
+ return b;
+}
+
+void
+remove_thread_event_breakpoints (void)
+{
+ struct breakpoint *b, *temp;
+
+ ALL_BREAKPOINTS_SAFE (b, temp)
+ if (b->type == bp_thread_event)
+ delete_breakpoint (b);
+}
+
#ifdef SOLIB_ADD
void
-remove_solib_event_breakpoints ()
+remove_solib_event_breakpoints (void)
{
register struct breakpoint *b, *temp;
ALL_BREAKPOINTS_SAFE (b, temp)
if (b->type == bp_shlib_event)
- delete_breakpoint (b);
+ delete_breakpoint (b);
}
struct breakpoint *
-create_solib_event_breakpoint (address)
- CORE_ADDR address;
+create_solib_event_breakpoint (CORE_ADDR address)
{
struct breakpoint *b;
- struct symtab_and_line sal;
-
- INIT_SAL (&sal); /* initialize to zeroes */
- sal.pc = address;
- sal.section = find_pc_overlay (sal.pc);
- b = set_raw_breakpoint (sal);
- b->number = internal_breakpoint_number--;
- b->disposition = donttouch;
- b->type = bp_shlib_event;
+ b = create_internal_breakpoint (address, bp_shlib_event);
return b;
}
apply to enabled breakpoints, disabled ones can just stay disabled. */
void
-disable_breakpoints_in_shlibs (silent)
- int silent;
+disable_breakpoints_in_shlibs (int silent)
{
struct breakpoint *b;
int disabled_shlib_breaks = 0;
#if defined (PC_SOLIB)
if (((b->type == bp_breakpoint) ||
(b->type == bp_hardware_breakpoint)) &&
- b->enable == enabled &&
+ b->enable_state == bp_enabled &&
!b->duplicate &&
PC_SOLIB (b->address))
{
- b->enable = shlib_disabled;
+ b->enable_state = bp_shlib_disabled;
if (!silent)
{
if (!disabled_shlib_breaks)
/* Try to reenable any breakpoints in shared libraries. */
void
-re_enable_breakpoints_in_shlibs ()
+re_enable_breakpoints_in_shlibs (void)
{
struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if (b->enable == shlib_disabled)
+ if (b->enable_state == bp_shlib_disabled)
{
char buf[1];
/* Do not reenable the breakpoint if the shared library
is still not mapped in. */
if (target_read_memory (b->address, buf, 1) == 0)
- b->enable = enabled;
+ b->enable_state = bp_enabled;
}
}
#endif
static void
-solib_load_unload_1 (hookname, tempflag, dll_pathname, cond_string, bp_kind)
- char *hookname;
- int tempflag;
- char *dll_pathname;
- char *cond_string;
- enum bptype bp_kind;
+solib_load_unload_1 (char *hookname, int tempflag, char *dll_pathname,
+ char *cond_string, enum bptype bp_kind)
{
struct breakpoint *b;
struct symtabs_and_lines sals;
/* Make sure that all storage allocated in decode_line_1 gets freed
in case the following errors out. */
- old_chain = make_cleanup (free, sals.sals);
+ old_chain = make_cleanup (xfree, sals.sals);
if (canonical != (char **) NULL)
{
- make_cleanup (free, canonical);
+ make_cleanup (xfree, canonical);
canonical_strings_chain = make_cleanup (null_cleanup, 0);
if (canonical[0] != NULL)
- make_cleanup (free, canonical[0]);
+ make_cleanup (xfree, canonical[0]);
}
resolve_sal_pc (&sals.sals[0]);
if (canonical != (char **) NULL)
discard_cleanups (canonical_strings_chain);
- b = set_raw_breakpoint (sals.sals[0]);
+ b = set_raw_breakpoint (sals.sals[0], bp_kind);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
b->cond = NULL;
else if (addr_start)
b->addr_string = savestring (addr_start, addr_end - addr_start);
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
+ b->enable_state = bp_enabled;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
if (dll_pathname == NULL)
b->dll_pathname = NULL;
b->dll_pathname = (char *) xmalloc (strlen (dll_pathname) + 1);
strcpy (b->dll_pathname, dll_pathname);
}
- b->type = bp_kind;
mention (b);
do_cleanups (old_chain);
}
void
-create_solib_load_event_breakpoint (hookname, tempflag,
- dll_pathname, cond_string)
- char *hookname;
- int tempflag;
- char *dll_pathname;
- char *cond_string;
+create_solib_load_event_breakpoint (char *hookname, int tempflag,
+ char *dll_pathname, char *cond_string)
{
solib_load_unload_1 (hookname, tempflag, dll_pathname,
cond_string, bp_catch_load);
}
void
-create_solib_unload_event_breakpoint (hookname, tempflag,
- dll_pathname, cond_string)
- char *hookname;
- int tempflag;
- char *dll_pathname;
- char *cond_string;
+create_solib_unload_event_breakpoint (char *hookname, int tempflag,
+ char *dll_pathname, char *cond_string)
{
solib_load_unload_1 (hookname,tempflag, dll_pathname,
cond_string, bp_catch_unload);
}
static void
-create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_kind)
- int tempflag;
- char *cond_string;
- enum bptype bp_kind;
+create_fork_vfork_event_catchpoint (int tempflag, char *cond_string,
+ enum bptype bp_kind)
{
struct symtab_and_line sal;
struct breakpoint *b;
sal.symtab = NULL;
sal.line = 0;
- b = set_raw_breakpoint (sal);
+ b = set_raw_breakpoint (sal, bp_kind);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
b->cond = NULL;
NULL : savestring (cond_string, strlen (cond_string));
b->thread = thread;
b->addr_string = NULL;
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
+ b->enable_state = bp_enabled;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
b->forked_inferior_pid = 0;
- b->type = bp_kind;
-
mention (b);
}
void
-create_fork_event_catchpoint (tempflag, cond_string)
- int tempflag;
- char *cond_string;
+create_fork_event_catchpoint (int tempflag, char *cond_string)
{
create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_catch_fork);
}
void
-create_vfork_event_catchpoint (tempflag, cond_string)
- int tempflag;
- char *cond_string;
+create_vfork_event_catchpoint (int tempflag, char *cond_string)
{
create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_catch_vfork);
}
void
-create_exec_event_catchpoint (tempflag, cond_string)
- int tempflag;
- char *cond_string;
+create_exec_event_catchpoint (int tempflag, char *cond_string)
{
struct symtab_and_line sal;
struct breakpoint *b;
sal.symtab = NULL;
sal.line = 0;
- b = set_raw_breakpoint (sal);
+ b = set_raw_breakpoint (sal, bp_catch_exec);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
b->cond = NULL;
NULL : savestring (cond_string, strlen (cond_string));
b->thread = thread;
b->addr_string = NULL;
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
-
- b->type = bp_catch_exec;
+ b->enable_state = bp_enabled;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
mention (b);
}
static int
-hw_breakpoint_used_count ()
+hw_breakpoint_used_count (void)
{
register struct breakpoint *b;
int i = 0;
ALL_BREAKPOINTS (b)
{
- if (b->type == bp_hardware_breakpoint && b->enable == enabled)
+ if (b->type == bp_hardware_breakpoint && b->enable_state == bp_enabled)
i++;
}
}
static int
-hw_watchpoint_used_count (type, other_type_used)
- enum bptype type;
- int *other_type_used;
+hw_watchpoint_used_count (enum bptype type, int *other_type_used)
{
register struct breakpoint *b;
int i = 0;
*other_type_used = 0;
ALL_BREAKPOINTS (b)
{
- if (b->enable == enabled)
+ if (b->enable_state == bp_enabled)
{
if (b->type == type)
i++;
else if ((b->type == bp_hardware_watchpoint ||
b->type == bp_read_watchpoint ||
b->type == bp_access_watchpoint)
- && b->enable == enabled)
+ && b->enable_state == bp_enabled)
*other_type_used = 1;
}
}
that gets deleted automatically... */
void
-set_longjmp_resume_breakpoint (pc, frame)
- CORE_ADDR pc;
- struct frame_info *frame;
+set_longjmp_resume_breakpoint (CORE_ADDR pc, struct frame_info *frame)
{
register struct breakpoint *b;
if (b->type == bp_longjmp_resume)
{
b->address = pc;
- b->enable = enabled;
+ b->enable_state = bp_enabled;
if (frame != NULL)
b->frame = frame->frame;
else
b->frame = 0;
- check_duplicates (b->address, b->section);
+ check_duplicates (b);
return;
}
}
void
-disable_watchpoints_before_interactive_call_start ()
+disable_watchpoints_before_interactive_call_start (void)
{
struct breakpoint *b;
|| (b->type == bp_read_watchpoint)
|| (b->type == bp_access_watchpoint)
|| ep_is_exception_catchpoint (b))
- && (b->enable == enabled))
+ && (b->enable_state == bp_enabled))
{
- b->enable = call_disabled;
- check_duplicates (b->address, b->section);
+ b->enable_state = bp_call_disabled;
+ check_duplicates (b);
}
}
}
void
-enable_watchpoints_after_interactive_call_stop ()
+enable_watchpoints_after_interactive_call_stop (void)
{
struct breakpoint *b;
|| (b->type == bp_read_watchpoint)
|| (b->type == bp_access_watchpoint)
|| ep_is_exception_catchpoint (b))
- && (b->enable == call_disabled))
+ && (b->enable_state == bp_call_disabled))
{
- b->enable = enabled;
- check_duplicates (b->address, b->section);
+ b->enable_state = bp_enabled;
+ check_duplicates (b);
}
}
}
Restrict it to frame FRAME if FRAME is nonzero. */
struct breakpoint *
-set_momentary_breakpoint (sal, frame, type)
- struct symtab_and_line sal;
- struct frame_info *frame;
- enum bptype type;
+set_momentary_breakpoint (struct symtab_and_line sal, struct frame_info *frame,
+ enum bptype type)
{
register struct breakpoint *b;
- b = set_raw_breakpoint (sal);
- b->type = type;
- b->enable = enabled;
- b->disposition = donttouch;
+ b = set_raw_breakpoint (sal, type);
+ b->enable_state = bp_enabled;
+ b->disposition = disp_donttouch;
b->frame = (frame ? frame->frame : 0);
/* If we're debugging a multi-threaded program, then we
want momentary breakpoints to be active in only a
single thread of control. */
- if (in_thread_list (inferior_pid))
- b->thread = pid_to_thread_id (inferior_pid);
+ if (in_thread_list (inferior_ptid))
+ b->thread = pid_to_thread_id (inferior_ptid);
return b;
}
/* Tell the user we have just set a breakpoint B. */
static void
-mention (b)
- struct breakpoint *b;
+mention (struct breakpoint *b)
{
int say_where = 0;
+ struct cleanup *old_chain;
+ struct ui_stream *stb;
+
+ stb = ui_out_stream_new (uiout);
+ old_chain = make_cleanup_ui_out_stream_delete (stb);
/* FIXME: This is misplaced; mention() is called by things (like hitting a
watchpoint) other than breakpoint creation. It should be possible to
printf_filtered ("(apparently deleted?) Eventpoint %d: ", b->number);
break;
case bp_watchpoint:
- printf_filtered ("Watchpoint %d: ", b->number);
- print_expression (b->exp, gdb_stdout);
+ ui_out_text (uiout, "Watchpoint ");
+ ui_out_tuple_begin (uiout, "wpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ ui_out_tuple_end (uiout);
break;
case bp_hardware_watchpoint:
- printf_filtered ("Hardware watchpoint %d: ", b->number);
- print_expression (b->exp, gdb_stdout);
+ ui_out_text (uiout, "Hardware watchpoint ");
+ ui_out_tuple_begin (uiout, "wpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ ui_out_tuple_end (uiout);
break;
case bp_read_watchpoint:
- printf_filtered ("Hardware read watchpoint %d: ", b->number);
- print_expression (b->exp, gdb_stdout);
+ ui_out_text (uiout, "Hardware read watchpoint ");
+ ui_out_tuple_begin (uiout, "hw-rwpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ ui_out_tuple_end (uiout);
break;
case bp_access_watchpoint:
- printf_filtered ("Hardware access (read/write) watchpoint %d: ",
- b->number);
- print_expression (b->exp, gdb_stdout);
+ ui_out_text (uiout, "Hardware access (read/write) watchpoint ");
+ ui_out_tuple_begin (uiout, "hw-awpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ ui_out_tuple_end (uiout);
break;
case bp_breakpoint:
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ say_where = 0;
+ break;
+ }
printf_filtered ("Breakpoint %d", b->number);
say_where = 1;
break;
case bp_hardware_breakpoint:
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ say_where = 0;
+ break;
+ }
printf_filtered ("Hardware assisted breakpoint %d", b->number);
say_where = 1;
break;
case bp_call_dummy:
case bp_watchpoint_scope:
case bp_shlib_event:
+ case bp_thread_event:
+ case bp_overlay_event:
break;
}
if (say_where)
if (b->source_file)
printf_filtered (": file %s, line %d.",
b->source_file, b->line_number);
- TUIDO (((TuiOpaqueFuncPtr) tui_vAllSetHasBreakAt, b, 1));
- TUIDO (((TuiOpaqueFuncPtr) tuiUpdateAllExecInfos));
}
+ do_cleanups (old_chain);
+ if (ui_out_is_mi_like_p (uiout))
+ return;
printf_filtered ("\n");
}
\f
-/* Set a breakpoint according to ARG (function, linenum or *address)
- flag: first bit : 0 non-temporary, 1 temporary.
- second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+/* Add SALS.nelts breakpoints to the breakpoint table. For each
+ SALS.sal[i] breakpoint, include the corresponding ADDR_STRING[i],
+ COND[i] and COND_STRING[i] values.
+
+ NOTE: If the function succeeds, the caller is expected to cleanup
+ the arrays ADDR_STRING, COND_STRING, COND and SALS (but not the
+ array contents). If the function fails (error() is called), the
+ caller is expected to cleanups both the ADDR_STRING, COND_STRING,
+ COND and SALS arrays and each of those arrays contents. */
static void
-break_command_1 (arg, flag, from_tty)
- char *arg;
- int flag, from_tty;
+create_breakpoints (struct symtabs_and_lines sals, char **addr_string,
+ struct expression **cond, char **cond_string,
+ enum bptype type, enum bpdisp disposition,
+ int thread, int ignore_count, int from_tty)
{
- int tempflag, hardwareflag;
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
- register struct expression *cond = 0;
- register struct breakpoint *b;
-
- /* Pointers in arg to the start, and one past the end, of the condition. */
- char *cond_start = NULL;
- char *cond_end = NULL;
- /* Pointers in arg to the start, and one past the end,
- of the address part. */
- char *addr_start = NULL;
- char *addr_end = NULL;
- struct cleanup *old_chain;
- struct cleanup *canonical_strings_chain = NULL;
- char **canonical = (char **) NULL;
- int i;
- int thread;
-
- hardwareflag = flag & BP_HARDWAREFLAG;
- tempflag = flag & BP_TEMPFLAG;
+ if (type == bp_hardware_breakpoint)
+ {
+ int i = hw_breakpoint_used_count ();
+ int target_resources_ok =
+ TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint,
+ i + sals.nelts, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
- sals.sals = NULL;
- sals.nelts = 0;
+ /* Now set all the breakpoints. */
+ {
+ int i;
+ for (i = 0; i < sals.nelts; i++)
+ {
+ struct breakpoint *b;
+ struct symtab_and_line sal = sals.sals[i];
- INIT_SAL (&sal); /* initialize to zeroes */
+ if (from_tty)
+ describe_other_breakpoints (sal.pc, sal.section);
+
+ b = set_raw_breakpoint (sal, type);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->cond = cond[i];
+ b->thread = thread;
+ b->addr_string = addr_string[i];
+ b->cond_string = cond_string[i];
+ b->ignore_count = ignore_count;
+ b->enable_state = bp_enabled;
+ b->disposition = disposition;
+ mention (b);
+ }
+ }
+}
- /* If no arg given, or if first arg is 'if ', use the default breakpoint. */
+/* Parse ARG which is assumed to be a SAL specification possibly
+ followed by conditionals. On return, SALS contains an array of SAL
+ addresses found. ADDR_STRING contains a vector of (canonical)
+ address strings. ARG points to the end of the SAL. */
- if (!arg || (arg[0] == 'i' && arg[1] == 'f'
- && (arg[2] == ' ' || arg[2] == '\t')))
+void
+parse_breakpoint_sals (char **address,
+ struct symtabs_and_lines *sals,
+ char ***addr_string)
+{
+ char *addr_start = *address;
+ *addr_string = NULL;
+ /* If no arg given, or if first arg is 'if ', use the default
+ breakpoint. */
+ if ((*address) == NULL
+ || (strncmp ((*address), "if", 2) == 0 && isspace ((*address)[2])))
{
if (default_breakpoint_valid)
{
- sals.sals = (struct symtab_and_line *)
+ struct symtab_and_line sal;
+ INIT_SAL (&sal); /* initialize to zeroes */
+ sals->sals = (struct symtab_and_line *)
xmalloc (sizeof (struct symtab_and_line));
sal.pc = default_breakpoint_address;
sal.line = default_breakpoint_line;
sal.symtab = default_breakpoint_symtab;
sal.section = find_pc_overlay (sal.pc);
- sals.sals[0] = sal;
- sals.nelts = 1;
+ sals->sals[0] = sal;
+ sals->nelts = 1;
}
else
error ("No default breakpoint address now.");
}
else
{
- addr_start = arg;
-
/* Force almost all breakpoints to be in terms of the
current_source_symtab (which is decode_line_1's default). This
should produce the results we want almost all of the time while
leaving default_breakpoint_* alone. */
if (default_breakpoint_valid
&& (!current_source_symtab
- || (arg && (*arg == '+' || *arg == '-'))))
- sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line, &canonical);
+ || (strchr ("+-", (*address)[0]) != NULL)))
+ *sals = decode_line_1 (address, 1, default_breakpoint_symtab,
+ default_breakpoint_line, addr_string);
else
- sals = decode_line_1 (&arg, 1, (struct symtab *) NULL, 0, &canonical);
-
- addr_end = arg;
+ *sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0, addr_string);
}
-
- if (!sals.nelts)
- return;
-
- /* Make sure that all storage allocated in decode_line_1 gets freed
- in case the following `for' loop errors out. */
- old_chain = make_cleanup (free, sals.sals);
- if (canonical != (char **) NULL)
+ /* For any SAL that didn't have a canonical string, fill one in. */
+ if (sals->nelts > 0 && *addr_string == NULL)
+ *addr_string = xcalloc (sals->nelts, sizeof (char **));
+ if (addr_start != (*address))
{
- make_cleanup (free, canonical);
- canonical_strings_chain = make_cleanup (null_cleanup, 0);
- for (i = 0; i < sals.nelts; i++)
+ int i;
+ for (i = 0; i < sals->nelts; i++)
{
- if (canonical[i] != NULL)
- make_cleanup (free, canonical[i]);
+ /* Add the string if not present. */
+ if ((*addr_string)[i] == NULL)
+ (*addr_string)[i] = savestring (addr_start, (*address) - addr_start);
}
}
+}
- thread = -1; /* No specific thread yet */
- /* Resolve all line numbers to PC's, and verify that conditions
- can be parsed, before setting any breakpoints. */
- for (i = 0; i < sals.nelts; i++)
- {
- char *tok, *end_tok;
- int toklen;
+/* Convert each SAL into a real PC. Verify that the PC can be
+ inserted as a breakpoint. If it can't throw an error. */
- resolve_sal_pc (&sals.sals[i]);
+void
+breakpoint_sals_to_pc (struct symtabs_and_lines *sals,
+ char *address)
+{
+ int i;
+ for (i = 0; i < sals->nelts; i++)
+ {
+ resolve_sal_pc (&sals->sals[i]);
/* It's possible for the PC to be nonzero, but still an illegal
value on some targets.
(Appears to be an index into a table that the loader sets up
when the inferior is run.)
- Give the target a chance to bless sals.sals[i].pc before we
- try to make a breakpoint for it. */
- if (PC_REQUIRES_RUN_BEFORE_USE (sals.sals[i].pc))
- {
- error ("Cannot break on %s without a running program.",
- addr_start);
- }
+ Give the target a chance to bless sals.sals[i].pc before we
+ try to make a breakpoint for it. */
+ if (PC_REQUIRES_RUN_BEFORE_USE (sals->sals[i].pc))
+ {
+ if (address == NULL)
+ error ("Cannot break without a running program.");
+ else
+ error ("Cannot break on %s without a running program.",
+ address);
+ }
+ }
+}
+
+/* Set a breakpoint according to ARG (function, linenum or *address)
+ flag: first bit : 0 non-temporary, 1 temporary.
+ second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+
+static void
+break_command_1 (char *arg, int flag, int from_tty)
+{
+ int tempflag, hardwareflag;
+ struct symtabs_and_lines sals;
+ register struct expression **cond = 0;
+ /* Pointers in arg to the start, and one past the end, of the
+ condition. */
+ char **cond_string = (char **) NULL;
+ char *addr_start = arg;
+ char **addr_string;
+ struct cleanup *old_chain;
+ struct cleanup *breakpoint_chain = NULL;
+ int i;
+ int thread = -1;
+ int ignore_count = 0;
+
+ hardwareflag = flag & BP_HARDWAREFLAG;
+ tempflag = flag & BP_TEMPFLAG;
+
+ sals.sals = NULL;
+ sals.nelts = 0;
+ addr_string = NULL;
+ parse_breakpoint_sals (&arg, &sals, &addr_string);
+
+ if (!sals.nelts)
+ return;
+
+ /* Create a chain of things that always need to be cleaned up. */
+ old_chain = make_cleanup (null_cleanup, 0);
+
+ /* Make sure that all storage allocated to SALS gets freed. */
+ make_cleanup (xfree, sals.sals);
+
+ /* Cleanup the addr_string array but not its contents. */
+ make_cleanup (xfree, addr_string);
+
+ /* Allocate space for all the cond expressions. */
+ cond = xcalloc (sals.nelts, sizeof (struct expression *));
+ make_cleanup (xfree, cond);
+
+ /* Allocate space for all the cond strings. */
+ cond_string = xcalloc (sals.nelts, sizeof (char **));
+ make_cleanup (xfree, cond_string);
- tok = arg;
+ /* ----------------------------- SNIP -----------------------------
+ Anything added to the cleanup chain beyond this point is assumed
+ to be part of a breakpoint. If the breakpoint create succeeds
+ then the memory is not reclaimed. */
+ breakpoint_chain = make_cleanup (null_cleanup, 0);
+ /* Mark the contents of the addr_string for cleanup. These go on
+ the breakpoint_chain and only occure if the breakpoint create
+ fails. */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ if (addr_string[i] != NULL)
+ make_cleanup (xfree, addr_string[i]);
+ }
+
+ /* Resolve all line numbers to PC's and verify that the addresses
+ are ok for the target. */
+ breakpoint_sals_to_pc (&sals, addr_start);
+
+ /* Verify that condition can be parsed, before setting any
+ breakpoints. Allocate a separate condition expression for each
+ breakpoint. */
+ thread = -1; /* No specific thread yet */
+ for (i = 0; i < sals.nelts; i++)
+ {
+ char *tok = arg;
while (tok && *tok)
{
+ char *end_tok;
+ int toklen;
+ char *cond_start = NULL;
+ char *cond_end = NULL;
while (*tok == ' ' || *tok == '\t')
tok++;
if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
{
tok = cond_start = end_tok + 1;
- cond = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ make_cleanup (xfree, cond[i]);
cond_end = tok;
+ cond_string[i] = savestring (cond_start, cond_end - cond_start);
+ make_cleanup (xfree, cond_string[i]);
}
else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
{
error ("Junk at end of arguments.");
}
}
- if (hardwareflag)
- {
- int i, target_resources_ok;
- i = hw_breakpoint_used_count ();
- target_resources_ok =
- TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint,
- i + sals.nelts, 0);
- if (target_resources_ok == 0)
- error ("No hardware breakpoint support in the target.");
- else if (target_resources_ok < 0)
- error ("Hardware breakpoints used exceeds limit.");
+ create_breakpoints (sals, addr_string, cond, cond_string,
+ hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
+ tempflag ? disp_del : disp_donttouch,
+ thread, ignore_count, from_tty);
+
+ if (sals.nelts > 1)
+ {
+ warning ("Multiple breakpoints were set.");
+ warning ("Use the \"delete\" command to delete unwanted breakpoints.");
}
+ /* That's it. Discard the cleanups for data inserted into the
+ breakpoint. */
+ discard_cleanups (breakpoint_chain);
+ /* But cleanup everything else. */
+ do_cleanups (old_chain);
+}
- /* Remove the canonical strings from the cleanup, they are needed below. */
- if (canonical != (char **) NULL)
- discard_cleanups (canonical_strings_chain);
+/* Set a breakpoint of TYPE/DISPOSITION according to ARG (function,
+ linenum or *address) with COND and IGNORE_COUNT. */
- /* Now set all the breakpoints. */
+struct captured_breakpoint_args
+ {
+ char *address;
+ char *condition;
+ int hardwareflag;
+ int tempflag;
+ int thread;
+ int ignore_count;
+ };
+
+static int
+do_captured_breakpoint (void *data)
+{
+ struct captured_breakpoint_args *args = data;
+ struct symtabs_and_lines sals;
+ register struct expression **cond;
+ struct cleanup *old_chain;
+ struct cleanup *breakpoint_chain = NULL;
+ int i;
+ char **addr_string;
+ char **cond_string;
+
+ char *address_end;
+
+ /* Parse the source and lines spec. Delay check that the expression
+ didn't contain trailing garbage until after cleanups are in
+ place. */
+ sals.sals = NULL;
+ sals.nelts = 0;
+ address_end = args->address;
+ addr_string = NULL;
+ parse_breakpoint_sals (&address_end, &sals, &addr_string);
+
+ if (!sals.nelts)
+ return GDB_RC_NONE;
+
+ /* Create a chain of things at always need to be cleaned up. */
+ old_chain = make_cleanup (null_cleanup, 0);
+
+ /* Always have a addr_string array, even if it is empty. */
+ make_cleanup (xfree, addr_string);
+
+ /* Make sure that all storage allocated to SALS gets freed. */
+ make_cleanup (xfree, sals.sals);
+
+ /* Allocate space for all the cond expressions. */
+ cond = xcalloc (sals.nelts, sizeof (struct expression *));
+ make_cleanup (xfree, cond);
+
+ /* Allocate space for all the cond strings. */
+ cond_string = xcalloc (sals.nelts, sizeof (char **));
+ make_cleanup (xfree, cond_string);
+
+ /* ----------------------------- SNIP -----------------------------
+ Anything added to the cleanup chain beyond this point is assumed
+ to be part of a breakpoint. If the breakpoint create goes
+ through then that memory is not cleaned up. */
+ breakpoint_chain = make_cleanup (null_cleanup, 0);
+
+ /* Mark the contents of the addr_string for cleanup. These go on
+ the breakpoint_chain and only occure if the breakpoint create
+ fails. */
for (i = 0; i < sals.nelts; i++)
{
- sal = sals.sals[i];
+ if (addr_string[i] != NULL)
+ make_cleanup (xfree, addr_string[i]);
+ }
- if (from_tty)
- describe_other_breakpoints (sal.pc, sal.section);
+ /* Wait until now before checking for garbage at the end of the
+ address. That way cleanups can take care of freeing any
+ memory. */
+ if (*address_end != '\0')
+ error ("Garbage %s following breakpoint address", address_end);
- b = set_raw_breakpoint (sal);
- set_breakpoint_count (breakpoint_count + 1);
- b->number = breakpoint_count;
- b->type = hardwareflag ? bp_hardware_breakpoint : bp_breakpoint;
- b->cond = cond;
- b->thread = thread;
-
- /* If a canonical line spec is needed use that instead of the
- command string. */
- if (canonical != (char **) NULL && canonical[i] != NULL)
- b->addr_string = canonical[i];
- else if (addr_start)
- b->addr_string = savestring (addr_start, addr_end - addr_start);
- if (cond_start)
- b->cond_string = savestring (cond_start, cond_end - cond_start);
-
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
- mention (b);
- }
+ /* Resolve all line numbers to PC's. */
+ breakpoint_sals_to_pc (&sals, args->address);
- if (sals.nelts > 1)
+ /* Verify that conditions can be parsed, before setting any
+ breakpoints. */
+ for (i = 0; i < sals.nelts; i++)
{
- warning ("Multiple breakpoints were set.");
- warning ("Use the \"delete\" command to delete unwanted breakpoints.");
+ if (args->condition != NULL)
+ {
+ char *tok = args->condition;
+ cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ if (*tok != '\0')
+ error ("Garbage %s follows condition", tok);
+ make_cleanup (xfree, cond[i]);
+ cond_string[i] = xstrdup (args->condition);
+ }
}
+
+ create_breakpoints (sals, addr_string, cond, cond_string,
+ args->hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
+ args->tempflag ? disp_del : disp_donttouch,
+ args->thread, args->ignore_count, 0/*from-tty*/);
+
+ /* That's it. Discard the cleanups for data inserted into the
+ breakpoint. */
+ discard_cleanups (breakpoint_chain);
+ /* But cleanup everything else. */
do_cleanups (old_chain);
+ return GDB_RC_OK;
+}
+
+enum gdb_rc
+gdb_breakpoint (char *address, char *condition,
+ int hardwareflag, int tempflag,
+ int thread, int ignore_count)
+{
+ struct captured_breakpoint_args args;
+ args.address = address;
+ args.condition = condition;
+ args.hardwareflag = hardwareflag;
+ args.tempflag = tempflag;
+ args.thread = thread;
+ args.ignore_count = ignore_count;
+ return catch_errors (do_captured_breakpoint, &args,
+ NULL, RETURN_MASK_ALL);
}
+
static void
-break_at_finish_at_depth_command_1 (arg, flag, from_tty)
- char *arg;
- int flag;
- int from_tty;
+break_at_finish_at_depth_command_1 (char *arg, int flag, int from_tty)
{
struct frame_info *frame;
CORE_ADDR low, high, selected_pc = 0;
- char *extra_args, *level_arg, *addr_string;
+ char *extra_args = NULL;
+ char *level_arg;
+ char *addr_string;
int extra_args_len = 0, if_arg = 0;
if (!arg ||
else
sprintf (addr_string, "*0x%s", paddr_nz (high));
break_command_1 (addr_string, flag, from_tty);
- free (addr_string);
+ xfree (addr_string);
}
else
error ("No function contains the specified address");
static void
-break_at_finish_command_1 (arg, flag, from_tty)
- char *arg;
- int flag;
- int from_tty;
+break_at_finish_command_1 (char *arg, int flag, int from_tty)
{
char *addr_string, *break_string, *beg_addr_string;
CORE_ADDR low, high;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
struct cleanup *old_chain;
- char *extra_args;
+ char *extra_args = NULL;
int extra_args_len = 0;
int i, if_arg = 0;
sals = decode_line_1 (&addr_string, 1, (struct symtab *) NULL, 0,
(char ***) NULL);
- free (beg_addr_string);
- old_chain = make_cleanup (free, sals.sals);
+ xfree (beg_addr_string);
+ old_chain = make_cleanup (xfree, sals.sals);
for (i = 0; (i < sals.nelts); i++)
{
sal = sals.sals[i];
else
sprintf (break_string, "*0x%s", paddr_nz (high));
break_command_1 (break_string, flag, from_tty);
- free (break_string);
+ xfree (break_string);
}
else
error ("No function contains the specified address");
/* Helper function for break_command_1 and disassemble_command. */
void
-resolve_sal_pc (sal)
- struct symtab_and_line *sal;
+resolve_sal_pc (struct symtab_and_line *sal)
{
CORE_ADDR pc;
}
void
-break_command (arg, from_tty)
- char *arg;
- int from_tty;
+break_command (char *arg, int from_tty)
{
break_command_1 (arg, 0, from_tty);
}
-static void
-break_at_finish_command (arg, from_tty)
- char *arg;
- int from_tty;
+void
+break_at_finish_command (char *arg, int from_tty)
{
break_at_finish_command_1 (arg, 0, from_tty);
}
-static void
-break_at_finish_at_depth_command (arg, from_tty)
- char *arg;
- int from_tty;
+void
+break_at_finish_at_depth_command (char *arg, int from_tty)
{
break_at_finish_at_depth_command_1 (arg, 0, from_tty);
}
void
-tbreak_command (arg, from_tty)
- char *arg;
- int from_tty;
+tbreak_command (char *arg, int from_tty)
{
break_command_1 (arg, BP_TEMPFLAG, from_tty);
}
-static void
-tbreak_at_finish_command (arg, from_tty)
- char *arg;
- int from_tty;
+void
+tbreak_at_finish_command (char *arg, int from_tty)
{
break_at_finish_command_1 (arg, BP_TEMPFLAG, from_tty);
}
static void
-hbreak_command (arg, from_tty)
- char *arg;
- int from_tty;
+hbreak_command (char *arg, int from_tty)
{
break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
}
static void
-thbreak_command (arg, from_tty)
- char *arg;
- int from_tty;
+thbreak_command (char *arg, int from_tty)
{
break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
}
static void
-stop_command (arg, from_tty)
- char *arg;
- int from_tty;
+stop_command (char *arg, int from_tty)
{
printf_filtered ("Specify the type of breakpoint to set.\n\
Usage: stop in <function | address>\n\
}
static void
-stopin_command (arg, from_tty)
- char *arg;
- int from_tty;
+stopin_command (char *arg, int from_tty)
{
int badInput = 0;
}
static void
-stopat_command (arg, from_tty)
- char *arg;
- int from_tty;
+stopat_command (char *arg, int from_tty)
{
int badInput = 0;
hw_read: watch read,
hw_access: watch access (read or write) */
static void
-watch_command_1 (arg, accessflag, from_tty)
- char *arg;
- int accessflag;
- int from_tty;
+watch_command_1 (char *arg, int accessflag, int from_tty)
{
struct breakpoint *b;
struct symtab_and_line sal;
startup sequence by the dynamic linker.
However, I tried avoiding that by having HP-UX's implementation of
- TARGET_CAN_USE_HW_WATCHPOINT return FALSE if there was no inferior_pid
+ TARGET_CAN_USE_HW_WATCHPOINT return FALSE if there was no inferior_ptid
yet, which forced slow watches before a "run" or "attach", and it
still fails somewhere in the startup code.
}
#endif /* HPUXHPPA */
+ /* Change the type of breakpoint to an ordinary watchpoint if a hardware
+ watchpoint could not be set. */
+ if (!mem_cnt || target_resources_ok <= 0)
+ bp_type = bp_watchpoint;
+
/* Now set up the breakpoint. */
- b = set_raw_breakpoint (sal);
+ b = set_raw_breakpoint (sal, bp_type);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->disposition = donttouch;
+ b->disposition = disp_donttouch;
b->exp = exp;
b->exp_valid_block = exp_valid_block;
b->exp_string = savestring (exp_start, exp_end - exp_start);
if (frame)
{
prev_frame = get_prev_frame (frame);
- b->watchpoint_frame = frame->frame;
+ get_frame_id (frame, &b->watchpoint_frame);
}
else
- b->watchpoint_frame = (CORE_ADDR) 0;
-
- if (mem_cnt && target_resources_ok > 0)
- b->type = bp_type;
- else
- b->type = bp_watchpoint;
+ {
+ memset (&b->watchpoint_frame, 0, sizeof (b->watchpoint_frame));
+ }
/* If the expression is "local", then set up a "watchpoint scope"
breakpoint at the point where we've left the scope of the watchpoint
if (prev_frame)
{
struct breakpoint *scope_breakpoint;
- struct symtab_and_line scope_sal;
-
- INIT_SAL (&scope_sal); /* initialize to zeroes */
- scope_sal.pc = get_frame_pc (prev_frame);
- scope_sal.section = find_pc_overlay (scope_sal.pc);
+ scope_breakpoint = create_internal_breakpoint (get_frame_pc (prev_frame),
+ bp_watchpoint_scope);
- scope_breakpoint = set_raw_breakpoint (scope_sal);
- set_breakpoint_count (breakpoint_count + 1);
- scope_breakpoint->number = breakpoint_count;
-
- scope_breakpoint->type = bp_watchpoint_scope;
- scope_breakpoint->enable = enabled;
+ scope_breakpoint->enable_state = bp_enabled;
/* Automatically delete the breakpoint when it hits. */
- scope_breakpoint->disposition = del;
+ scope_breakpoint->disposition = disp_del;
/* Only break in the proper frame (help with recursion). */
scope_breakpoint->frame = prev_frame->frame;
#if !defined(TARGET_REGION_OK_FOR_HW_WATCHPOINT)
#define TARGET_REGION_OK_FOR_HW_WATCHPOINT(ADDR,LEN) \
- TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(LEN)
+ (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(LEN))
#endif
static int
-can_use_hardware_watchpoint (v)
- struct value *v;
+can_use_hardware_watchpoint (struct value *v)
{
int found_memory_cnt = 0;
+ struct value *head = v;
/* Did the user specifically forbid us to use hardware watchpoints? */
if (!can_use_hw_watchpoints)
return 0;
- /* Make sure all the intermediate values are in memory. Also make sure
- we found at least one memory expression. Guards against watch 0x12345,
- which is meaningless, but could cause errors if one tries to insert a
- hardware watchpoint for the constant expression. */
+ /* Make sure that the value of the expression depends only upon
+ memory contents, and values computed from them within GDB. If we
+ find any register references or function calls, we can't use a
+ hardware watchpoint.
+
+ The idea here is that evaluating an expression generates a series
+ of values, one holding the value of every subexpression. (The
+ expression a*b+c has five subexpressions: a, b, a*b, c, and
+ a*b+c.) GDB's values hold almost enough information to establish
+ the criteria given above --- they identify memory lvalues,
+ register lvalues, computed values, etcetera. So we can evaluate
+ the expression, and then scan the chain of values that leaves
+ behind to decide whether we can detect any possible change to the
+ expression's final value using only hardware watchpoints.
+
+ However, I don't think that the values returned by inferior
+ function calls are special in any way. So this function may not
+ notice that an expression involving an inferior function call
+ can't be watched with hardware watchpoints. FIXME. */
for (; v; v = v->next)
{
- if (v->lval == lval_memory)
+ if (VALUE_LVAL (v) == lval_memory)
{
- CORE_ADDR vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
- int len = TYPE_LENGTH (VALUE_TYPE (v));
-
- if (!TARGET_REGION_OK_FOR_HW_WATCHPOINT (vaddr, len))
- return 0;
+ if (VALUE_LAZY (v))
+ /* A lazy memory lvalue is one that GDB never needed to fetch;
+ we either just used its address (e.g., `a' in `a.b') or
+ we never needed it at all (e.g., `a' in `a,b'). */
+ ;
else
- found_memory_cnt++;
+ {
+ /* Ahh, memory we actually used! Check if we can cover
+ it with hardware watchpoints. */
+ struct type *vtype = check_typedef (VALUE_TYPE (v));
+
+ /* We only watch structs and arrays if user asked for it
+ explicitly, never if they just happen to appear in a
+ middle of some value chain. */
+ if (v == head
+ || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
+ && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
+ {
+ CORE_ADDR vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ int len = TYPE_LENGTH (VALUE_TYPE (v));
+
+ if (!TARGET_REGION_OK_FOR_HW_WATCHPOINT (vaddr, len))
+ return 0;
+ else
+ found_memory_cnt++;
+ }
+ }
}
else if (v->lval != not_lval && v->modifiable == 0)
return 0; /* ??? What does this represent? */
return found_memory_cnt;
}
+void
+watch_command_wrapper (char *arg, int from_tty)
+{
+ watch_command (arg, from_tty);
+}
+
static void
-watch_command (arg, from_tty)
- char *arg;
- int from_tty;
+watch_command (char *arg, int from_tty)
{
watch_command_1 (arg, hw_write, from_tty);
}
+void
+rwatch_command_wrapper (char *arg, int from_tty)
+{
+ rwatch_command (arg, from_tty);
+}
+
static void
-rwatch_command (arg, from_tty)
- char *arg;
- int from_tty;
+rwatch_command (char *arg, int from_tty)
{
watch_command_1 (arg, hw_read, from_tty);
}
+void
+awatch_command_wrapper (char *arg, int from_tty)
+{
+ awatch_command (arg, from_tty);
+}
+
static void
-awatch_command (arg, from_tty)
- char *arg;
- int from_tty;
+awatch_command (char *arg, int from_tty)
{
watch_command_1 (arg, hw_access, from_tty);
}
static void
until_break_command_continuation (struct continuation_arg *arg)
{
- /* Do all the exec cleanups, which at this point should only be the
- one set up in the first part of the until_break_command
- function. */
- do_exec_cleanups (ALL_CLEANUPS);
+ struct cleanup *cleanups;
+
+ cleanups = (struct cleanup *) arg->data.pointer;
+ do_exec_cleanups (cleanups);
}
/* ARGSUSED */
void
-until_break_command (arg, from_tty)
- char *arg;
- int from_tty;
+until_break_command (char *arg, int from_tty)
{
struct symtabs_and_lines sals;
struct symtab_and_line sal;
struct frame_info *prev_frame = get_prev_frame (selected_frame);
struct breakpoint *breakpoint;
struct cleanup *old_chain;
+ struct continuation_arg *arg1;
+
clear_proceed_status ();
error ("Couldn't get information on specified line.");
sal = sals.sals[0];
- free ((PTR) sals.sals); /* malloc'd, so freed */
+ xfree (sals.sals); /* malloc'd, so freed */
if (*arg)
error ("Junk at end of arguments.");
breakpoint = set_momentary_breakpoint (sal, selected_frame, bp_until);
if (!event_loop_p || !target_can_async_p ())
- old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint,
- breakpoint);
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
else
- make_exec_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+ old_chain = make_exec_cleanup_delete_breakpoint (breakpoint);
/* If we are running asynchronously, and the target supports async
execution, we are not waiting for the target to stop, in the call
if (event_loop_p && target_can_async_p ())
{
- /* In this case we don't need args for the continuation, because
- all it needs to do is do the cleanups in the
- exec_cleanup_chain, which will be only those inserted by this
- function. We can get away by using ALL_CLEANUPS. */
- add_continuation (until_break_command_continuation, NULL);
+ /* In this case the arg for the continuation is just the point
+ in the exec_cleanups chain from where to start doing
+ cleanups, because all the continuation does is the cleanups in
+ the exec_cleanup_chain. */
+ arg1 =
+ (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
+ arg1->next = NULL;
+ arg1->data.pointer = old_chain;
+
+ add_continuation (until_break_command_continuation, arg1);
}
/* Keep within the current frame */
sal.pc = prev_frame->pc;
breakpoint = set_momentary_breakpoint (sal, prev_frame, bp_until);
if (!event_loop_p || !target_can_async_p ())
- make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+ make_cleanup_delete_breakpoint (breakpoint);
else
- make_exec_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+ make_exec_cleanup_delete_breakpoint (breakpoint);
}
proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
/* These aren't used; I don't konw what they were for. */
/* Set a breakpoint at the catch clause for NAME. */
static int
-catch_breakpoint (name)
- char *name;
+catch_breakpoint (char *name)
{
}
static int
-disable_catch_breakpoint ()
+disable_catch_breakpoint (void)
{
}
static int
-delete_catch_breakpoint ()
+delete_catch_breakpoint (void)
{
}
static int
-enable_catch_breakpoint ()
+enable_catch_breakpoint (void)
{
}
#endif /* 0 */
/* For each catch clause identified in ARGS, run FUNCTION
with that clause as an argument. */
static struct symtabs_and_lines
-map_catch_names (args, function)
- char *args;
- int (*function) ();
+map_catch_names (char *args, int (*function) ())
{
register char *p = args;
register char *p1;
/* This shares a lot of code with `print_frame_label_vars' from stack.c. */
static struct symtabs_and_lines
-get_catch_sals (this_level_only)
- int this_level_only;
+get_catch_sals (int this_level_only)
{
register struct blockvector *bl;
register struct block *block;
but it's better than a core dump. */
if (selected_frame == NULL)
error ("No selected frame.");
- block = get_frame_block (selected_frame);
+ block = get_frame_block (selected_frame, 0);
pc = selected_frame->pc;
sals.nelts = 0;
if (blocks_searched[index] == 0)
{
struct block *b = BLOCKVECTOR_BLOCK (bl, index);
- int nsyms;
register int i;
register struct symbol *sym;
- nsyms = BLOCK_NSYMS (b);
-
- for (i = 0; i < nsyms; i++)
+ ALL_BLOCK_SYMBOLS (b, i, sym)
{
- sym = BLOCK_SYM (b, i);
if (STREQ (SYMBOL_NAME (sym), "default"))
{
if (have_default)
}
static void
-ep_skip_leading_whitespace (s)
- char **s;
+ep_skip_leading_whitespace (char **s)
{
if ((s == NULL) || (*s == NULL))
return;
the token is returned. Else, NULL is returned. */
static char *
-ep_find_event_name_end (arg)
- char *arg;
+ep_find_event_name_end (char *arg)
{
char *s = arg;
char *event_name_end = NULL;
if clause in the arg string. */
static char *
-ep_parse_optional_if_clause (arg)
- char **arg;
+ep_parse_optional_if_clause (char **arg)
{
char *cond_string;
Note that clients needing to preserve the returned filename for
future access should copy it to their own buffers. */
static char *
-ep_parse_optional_filename (arg)
- char **arg;
+ep_parse_optional_filename (char **arg)
{
static char filename[1024];
char *arg_p = *arg;
}
catch_fork_kind;
-static void catch_fork_command_1 PARAMS ((catch_fork_kind fork_kind,
- char *arg,
- int tempflag,
- int from_tty));
+#if defined(CHILD_INSERT_FORK_CATCHPOINT) || defined(CHILD_INSERT_VFORK_CATCHPOINT)
+static void catch_fork_command_1 (catch_fork_kind fork_kind,
+ char *arg, int tempflag, int from_tty);
static void
-catch_fork_command_1 (fork_kind, arg, tempflag, from_tty)
- catch_fork_kind fork_kind;
- char *arg;
- int tempflag;
- int from_tty;
+catch_fork_command_1 (catch_fork_kind fork_kind, char *arg, int tempflag,
+ int from_tty)
{
char *cond_string = NULL;
break;
}
}
+#endif
+#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
static void
-catch_exec_command_1 (arg, tempflag, from_tty)
- char *arg;
- int tempflag;
- int from_tty;
+catch_exec_command_1 (char *arg, int tempflag, int from_tty)
{
char *cond_string = NULL;
and enable reporting of such events. */
create_exec_event_catchpoint (tempflag, cond_string);
}
+#endif
#if defined(SOLIB_ADD)
static void
-catch_load_command_1 (arg, tempflag, from_tty)
- char *arg;
- int tempflag;
- int from_tty;
+catch_load_command_1 (char *arg, int tempflag, int from_tty)
{
char *dll_pathname = NULL;
char *cond_string = NULL;
/* Create a load breakpoint that only triggers when a load of
the specified dll (or any dll, if no pathname was specified)
occurs. */
- SOLIB_CREATE_CATCH_LOAD_HOOK (inferior_pid, tempflag,
+ SOLIB_CREATE_CATCH_LOAD_HOOK (PIDGET (inferior_ptid), tempflag,
dll_pathname, cond_string);
}
static void
-catch_unload_command_1 (arg, tempflag, from_tty)
- char *arg;
- int tempflag;
- int from_tty;
+catch_unload_command_1 (char *arg, int tempflag, int from_tty)
{
char *dll_pathname = NULL;
char *cond_string = NULL;
/* Create an unload breakpoint that only triggers when an unload of
the specified dll (or any dll, if no pathname was specified)
occurs. */
- SOLIB_CREATE_CATCH_UNLOAD_HOOK (inferior_pid, tempflag,
+ SOLIB_CREATE_CATCH_UNLOAD_HOOK (PIDGET (inferior_ptid), tempflag,
dll_pathname, cond_string);
}
#endif /* SOLIB_ADD */
exception event callback */
static void
-create_exception_catchpoint (tempflag, cond_string, ex_event, sal)
- int tempflag;
- char *cond_string;
- enum exception_event_kind ex_event;
- struct symtab_and_line *sal;
+create_exception_catchpoint (int tempflag, char *cond_string,
+ enum exception_event_kind ex_event,
+ struct symtab_and_line *sal)
{
struct breakpoint *b;
int thread = -1; /* All threads. */
+ enum bptype bptype;
if (!sal) /* no exception support? */
return;
- b = set_raw_breakpoint (*sal);
- set_breakpoint_count (breakpoint_count + 1);
- b->number = breakpoint_count;
- b->cond = NULL;
- b->cond_string = (cond_string == NULL) ?
- NULL : savestring (cond_string, strlen (cond_string));
- b->thread = thread;
- b->addr_string = NULL;
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
switch (ex_event)
{
case EX_EVENT_THROW:
- b->type = bp_catch_throw;
+ bptype = bp_catch_throw;
break;
case EX_EVENT_CATCH:
- b->type = bp_catch_catch;
+ bptype = bp_catch_catch;
break;
default: /* error condition */
- b->type = bp_none;
- b->enable = disabled;
error ("Internal error -- invalid catchpoint kind");
}
+
+ b = set_raw_breakpoint (*sal, bptype);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->cond = NULL;
+ b->cond_string = (cond_string == NULL) ?
+ NULL : savestring (cond_string, strlen (cond_string));
+ b->thread = thread;
+ b->addr_string = NULL;
+ b->enable_state = bp_enabled;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
mention (b);
}
/* Deal with "catch catch" and "catch throw" commands */
static void
-catch_exception_command_1 (ex_event, arg, tempflag, from_tty)
- enum exception_event_kind ex_event;
- char *arg;
- int tempflag;
- int from_tty;
+catch_exception_command_1 (enum exception_event_kind ex_event, char *arg,
+ int tempflag, int from_tty)
{
char *cond_string = NULL;
struct symtab_and_line *sal = NULL;
inside a catch_errors */
static int
-cover_target_enable_exception_callback (arg)
- PTR arg;
+cover_target_enable_exception_callback (PTR arg)
{
args_for_catchpoint_enable *args = arg;
struct symtab_and_line *sal;
- sal = target_enable_exception_callback (args->kind, args->enable);
+ sal = target_enable_exception_callback (args->kind, args->enable_p);
if (sal == NULL)
return 0;
else if (sal == (struct symtab_and_line *) -1)
static void
-handle_gnu_4_16_catch_command (arg, tempflag, from_tty)
- char *arg;
- int tempflag;
- int from_tty;
+handle_gnu_4_16_catch_command (char *arg, int tempflag, int from_tty)
{
/* First, translate ARG into something we can deal with in terms
of breakpoints. */
if (from_tty)
describe_other_breakpoints (sal.pc, sal.section);
- b = set_raw_breakpoint (sal);
- set_breakpoint_count (breakpoint_count + 1);
- b->number = breakpoint_count;
-
/* Important -- this is an ordinary breakpoint. For platforms
with callback support for exceptions,
create_exception_catchpoint() will create special bp types
(bp_catch_catch and bp_catch_throw), and there is code in
insert_breakpoints() and elsewhere that depends on that. */
- b->type = bp_breakpoint;
+ b = set_raw_breakpoint (sal, bp_breakpoint);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
b->cond = cond;
- b->enable = enabled;
- b->disposition = tempflag ? del : donttouch;
+ b->enable_state = bp_enabled;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
mention (b);
}
warning ("Multiple breakpoints were set.");
warning ("Use the \"delete\" command to delete unwanted breakpoints.");
}
- free ((PTR) sals.sals);
-}
-
-#if 0
-/* This creates a temporary internal breakpoint
- just to placate infrun */
-static struct breakpoint *
-create_temp_exception_breakpoint (pc)
- CORE_ADDR pc;
-{
- struct symtab_and_line sal;
- struct breakpoint *b;
-
- INIT_SAL (&sal);
- sal.pc = pc;
- sal.symtab = NULL;
- sal.line = 0;
-
- b = set_raw_breakpoint (sal);
- if (!b)
- error ("Internal error -- couldn't set temp exception breakpoint");
-
- b->type = bp_breakpoint;
- b->disposition = del;
- b->enable = enabled;
- b->silent = 1;
- b->number = internal_breakpoint_number--;
- return b;
+ xfree (sals.sals);
}
-#endif
static void
-catch_command_1 (arg, tempflag, from_tty)
- char *arg;
- int tempflag;
- int from_tty;
+catch_command_1 (char *arg, int tempflag, int from_tty)
{
/* The first argument may be an event name, such as "start" or "load".
/* Used by the gui, could be made a worker for other things. */
struct breakpoint *
-set_breakpoint_sal (sal)
- struct symtab_and_line sal;
+set_breakpoint_sal (struct symtab_and_line sal)
{
struct breakpoint *b;
- b = set_raw_breakpoint (sal);
+ b = set_raw_breakpoint (sal, bp_breakpoint);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->type = bp_breakpoint;
b->cond = 0;
b->thread = -1;
return b;
/* These aren't used; I don't know what they were for. */
/* Disable breakpoints on all catch clauses described in ARGS. */
static void
-disable_catch (args)
- char *args;
+disable_catch (char *args)
{
/* Map the disable command to catch clauses described in ARGS. */
}
/* Enable breakpoints on all catch clauses described in ARGS. */
static void
-enable_catch (args)
- char *args;
+enable_catch (char *args)
{
/* Map the disable command to catch clauses described in ARGS. */
}
/* Delete breakpoints on all catch clauses in the active scope. */
static void
-delete_catch (args)
- char *args;
+delete_catch (char *args)
{
/* Map the delete command to catch clauses described in ARGS. */
}
#endif /* 0 */
static void
-catch_command (arg, from_tty)
- char *arg;
- int from_tty;
+catch_command (char *arg, int from_tty)
{
catch_command_1 (arg, 0, from_tty);
}
\f
static void
-tcatch_command (arg, from_tty)
- char *arg;
- int from_tty;
+tcatch_command (char *arg, int from_tty)
{
catch_command_1 (arg, 1, from_tty);
}
+/* Delete breakpoints by address or line. */
static void
-clear_command (arg, from_tty)
- char *arg;
- int from_tty;
+clear_command (char *arg, int from_tty)
{
- register struct breakpoint *b, *b1;
+ struct breakpoint *b, *tmp, *prev, *found;
int default_match;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
- register struct breakpoint *found;
int i;
if (arg)
{
sals.sals = (struct symtab_and_line *)
xmalloc (sizeof (struct symtab_and_line));
+ make_cleanup (xfree, sals.sals);
INIT_SAL (&sal); /* initialize to zeroes */
sal.line = default_breakpoint_line;
sal.symtab = default_breakpoint_symtab;
}
/* For each line spec given, delete bps which correspond
- to it. We do this in two loops: the first loop looks at
- the initial bp(s) in the chain which should be deleted,
- the second goes down the rest of the chain looking ahead
- one so it can take those bps off the chain without messing
- up the chain. */
-
+ to it. Do it in two passes, solely to preserve the current
+ behavior that from_tty is forced true if we delete more than
+ one breakpoint. */
+ found = NULL;
for (i = 0; i < sals.nelts; i++)
{
/* If exact pc given, clear bpts at that pc.
1 0 <can't happen> */
sal = sals.sals[i];
- found = (struct breakpoint *) 0;
-
-
- while (breakpoint_chain
- /* Why don't we check here that this is not
- a watchpoint, etc., as we do below?
- I can't make it fail, but don't know
- what's stopping the failure: a watchpoint
- of the same address as "sal.pc" should
- wind up being deleted. */
-
- && (((sal.pc && (breakpoint_chain->address == sal.pc)) &&
- (overlay_debugging == 0 ||
- breakpoint_chain->section == sal.section))
- || ((default_match || (0 == sal.pc))
- && breakpoint_chain->source_file != NULL
- && sal.symtab != NULL
- && STREQ (breakpoint_chain->source_file, sal.symtab->filename)
- && breakpoint_chain->line_number == sal.line)))
-
- {
- b1 = breakpoint_chain;
- breakpoint_chain = b1->next;
- b1->next = found;
- found = b1;
- }
-
- ALL_BREAKPOINTS (b)
+ prev = NULL;
- while (b->next
- && b->next->type != bp_none
- && b->next->type != bp_watchpoint
- && b->next->type != bp_hardware_watchpoint
- && b->next->type != bp_read_watchpoint
- && b->next->type != bp_access_watchpoint
- && (((sal.pc && (b->next->address == sal.pc)) &&
- (overlay_debugging == 0 ||
- b->next->section == sal.section))
- || ((default_match || (0 == sal.pc))
- && b->next->source_file != NULL
- && sal.symtab != NULL
- && STREQ (b->next->source_file, sal.symtab->filename)
- && b->next->line_number == sal.line)))
-
-
- {
- b1 = b->next;
- b->next = b1->next;
- b1->next = found;
- found = b1;
- }
-
- if (found == 0)
+ /* Find all matching breakpoints, remove them from the
+ breakpoint chain, and add them to the 'found' chain. */
+ ALL_BREAKPOINTS_SAFE (b, tmp)
{
- if (arg)
- error ("No breakpoint at %s.", arg);
+ /* Are we going to delete b? */
+ if (b->type != bp_none
+ && b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
+ /* Not if b is a watchpoint of any sort... */
+ && (((sal.pc && (b->address == sal.pc))
+ && (!section_is_overlay (b->section)
+ || b->section == sal.section))
+ /* Yes, if sal.pc matches b (modulo overlays). */
+ || ((default_match || (0 == sal.pc))
+ && b->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (b->source_file, sal.symtab->filename)
+ && b->line_number == sal.line)))
+ /* Yes, if sal source file and line matches b. */
+ {
+ /* Remove it from breakpoint_chain... */
+ if (b == breakpoint_chain)
+ {
+ /* b is at the head of the list */
+ breakpoint_chain = b->next;
+ }
+ else
+ {
+ prev->next = b->next;
+ }
+ /* And add it to 'found' chain. */
+ b->next = found;
+ found = b;
+ }
else
- error ("No breakpoint at this line.");
+ {
+ /* Keep b, and keep a pointer to it. */
+ prev = b;
+ }
}
+ }
+ /* Now go thru the 'found' chain and delete them. */
+ if (found == 0)
+ {
+ if (arg)
+ error ("No breakpoint at %s.", arg);
+ else
+ error ("No breakpoint at this line.");
+ }
- if (found->next)
- from_tty = 1; /* Always report if deleted more than one */
- if (from_tty)
- printf_unfiltered ("Deleted breakpoint%s ", found->next ? "s" : "");
- breakpoints_changed ();
- while (found)
- {
- if (from_tty)
- printf_unfiltered ("%d ", found->number);
- b1 = found->next;
- delete_breakpoint (found);
- found = b1;
- }
+ if (found->next)
+ from_tty = 1; /* Always report if deleted more than one */
+ if (from_tty)
+ printf_unfiltered ("Deleted breakpoint%s ", found->next ? "s" : "");
+ breakpoints_changed ();
+ while (found)
+ {
if (from_tty)
- putchar_unfiltered ('\n');
+ printf_unfiltered ("%d ", found->number);
+ tmp = found->next;
+ delete_breakpoint (found);
+ found = tmp;
}
- free ((PTR) sals.sals);
+ if (from_tty)
+ putchar_unfiltered ('\n');
}
\f
/* Delete breakpoint in BS if they are `delete' breakpoints and
This is called after any breakpoint is hit, or after errors. */
void
-breakpoint_auto_delete (bs)
- bpstat bs;
+breakpoint_auto_delete (bpstat bs)
{
struct breakpoint *b, *temp;
for (; bs; bs = bs->next)
- if (bs->breakpoint_at && bs->breakpoint_at->disposition == del
+ if (bs->breakpoint_at && bs->breakpoint_at->disposition == disp_del
&& bs->stop)
delete_breakpoint (bs->breakpoint_at);
ALL_BREAKPOINTS_SAFE (b, temp)
{
- if (b->disposition == del_at_next_stop)
+ if (b->disposition == disp_del_at_next_stop)
delete_breakpoint (b);
}
}
structures. */
void
-delete_breakpoint (bpt)
- struct breakpoint *bpt;
+delete_breakpoint (struct breakpoint *bpt)
{
register struct breakpoint *b;
register bpstat bs;
breakpoint_delete_event (bpt->number);
if (bpt->inserted)
- remove_breakpoint (bpt, mark_uninserted);
+ remove_breakpoint (bpt, mark_inserted);
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
sprintf (message, message1, bpt->number);
args.kind = bpt->type == bp_catch_catch ?
EX_EVENT_CATCH : EX_EVENT_THROW;
- args.enable = 0;
+ args.enable_p = 0;
catch_errors (cover_target_enable_exception_callback, &args,
message, RETURN_MASK_ALL);
}
break;
}
- /* Before turning off the visuals for the bp, check to see that
- there are no other bps at the same address. */
- if (tui_version)
- {
- int clearIt;
-
- ALL_BREAKPOINTS (b)
- {
- clearIt = (b->address != bpt->address);
- if (!clearIt)
- break;
- }
-
- if (clearIt)
- {
- TUIDO (((TuiOpaqueFuncPtr) tui_vAllSetHasBreakAt, bpt, 0));
- TUIDO (((TuiOpaqueFuncPtr) tuiUpdateAllExecInfos));
- }
- }
-
- check_duplicates (bpt->address, bpt->section);
+ check_duplicates (bpt);
/* If this breakpoint was inserted, and there is another breakpoint
at the same address, we need to insert the other breakpoint. */
if (bpt->inserted
if (b->address == bpt->address
&& b->section == bpt->section
&& !b->duplicate
- && b->enable != disabled
- && b->enable != shlib_disabled
- && b->enable != call_disabled)
+ && b->enable_state != bp_disabled
+ && b->enable_state != bp_shlib_disabled
+ && b->enable_state != bp_call_disabled)
{
int val;
breakpoint at the same address as the one being deleted.
If there is a permanent breakpoint somewhere, it should
always be the only one inserted. */
- if (b->enable == permanent)
- internal_error ("another breakpoint was inserted on top of "
+ if (b->enable_state == bp_permanent)
+ internal_error (__FILE__, __LINE__,
+ "another breakpoint was inserted on top of "
"a permanent breakpoint");
if (b->type == bp_hardware_breakpoint)
free_command_lines (&bpt->commands);
if (bpt->cond)
- free (bpt->cond);
+ xfree (bpt->cond);
if (bpt->cond_string != NULL)
- free (bpt->cond_string);
+ xfree (bpt->cond_string);
if (bpt->addr_string != NULL)
- free (bpt->addr_string);
+ xfree (bpt->addr_string);
if (bpt->exp != NULL)
- free (bpt->exp);
+ xfree (bpt->exp);
if (bpt->exp_string != NULL)
- free (bpt->exp_string);
+ xfree (bpt->exp_string);
if (bpt->val != NULL)
value_free (bpt->val);
if (bpt->source_file != NULL)
- free (bpt->source_file);
+ xfree (bpt->source_file);
if (bpt->dll_pathname != NULL)
- free (bpt->dll_pathname);
+ xfree (bpt->dll_pathname);
if (bpt->triggered_dll_pathname != NULL)
- free (bpt->triggered_dll_pathname);
+ xfree (bpt->triggered_dll_pathname);
if (bpt->exec_pathname != NULL)
- free (bpt->exec_pathname);
+ xfree (bpt->exec_pathname);
/* Be sure no bpstat's are pointing at it after it's been freed. */
/* FIXME, how can we find all bpstat's?
bp, we mark it as deleted before freeing its storage. */
bpt->type = bp_none;
- free ((PTR) bpt);
+ xfree (bpt);
+}
+
+static void
+do_delete_breakpoint_cleanup (void *b)
+{
+ delete_breakpoint (b);
+}
+
+struct cleanup *
+make_cleanup_delete_breakpoint (struct breakpoint *b)
+{
+ return make_cleanup (do_delete_breakpoint_cleanup, b);
+}
+
+struct cleanup *
+make_exec_cleanup_delete_breakpoint (struct breakpoint *b)
+{
+ return make_exec_cleanup (do_delete_breakpoint_cleanup, b);
}
void
-delete_command (arg, from_tty)
- char *arg;
- int from_tty;
+delete_command (char *arg, int from_tty)
{
struct breakpoint *b, *temp;
+ dont_repeat ();
+
if (arg == 0)
{
int breaks_to_delete = 0;
{
if (b->type != bp_call_dummy &&
b->type != bp_shlib_event &&
+ b->type != bp_thread_event &&
+ b->type != bp_overlay_event &&
b->number >= 0)
breaks_to_delete = 1;
}
{
if (b->type != bp_call_dummy &&
b->type != bp_shlib_event &&
+ b->type != bp_thread_event &&
+ b->type != bp_overlay_event &&
b->number >= 0)
delete_breakpoint (b);
}
Unused in this case. */
static int
-breakpoint_re_set_one (bint)
- PTR bint;
+breakpoint_re_set_one (PTR bint)
{
/* get past catch_errs */
struct breakpoint *b = (struct breakpoint *) bint;
int i;
struct symtabs_and_lines sals;
char *s;
- enum enable save_enable;
+ enum enable_state save_enable;
switch (b->type)
{
delete_breakpoint (b);
return 0;
}
- /* In case we have a problem, disable this breakpoint. We'll restore
- its status if we succeed. */
- save_enable = b->enable;
- b->enable = disabled;
+ /* HACK: cagney/2001-11-11: kettenis/2001-11-11: MarkK wrote:
+
+ ``And a hack it is, although Apple's Darwin version of GDB
+ contains an almost identical hack to implement a "future
+ break" command. It seems to work in many real world cases,
+ but it is easy to come up with a test case where the patch
+ doesn't help at all.''
+
+ ``It seems that the way GDB implements breakpoints - in -
+ shared - libraries was designed for a.out shared library
+ systems (SunOS 4) where shared libraries were loaded at a
+ fixed address in memory. Since ELF shared libraries can (and
+ will) be loaded at any address in memory, things break.
+ Fixing this is not trivial. Therefore, I'm not sure whether
+ we should add this hack to the branch only. I cannot
+ guarantee that things will be fixed on the trunk in the near
+ future.''
+
+ In case we have a problem, disable this breakpoint. We'll
+ restore its status if we succeed. Don't disable a
+ shlib_disabled breakpoint though. There's a fair chance we
+ can't re-set it if the shared library it's in hasn't been
+ loaded yet. */
+ save_enable = b->enable_state;
+ if (b->enable_state != bp_shlib_disabled)
+ b->enable_state = bp_disabled;
set_language (b->language);
input_radix = b->input_radix;
{
s = b->cond_string;
if (b->cond)
- free ((PTR) b->cond);
+ xfree (b->cond);
b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
}
)
{
if (b->source_file != NULL)
- free (b->source_file);
+ xfree (b->source_file);
if (sals.sals[i].symtab == NULL)
b->source_file = NULL;
else
b->address = sals.sals[i].pc;
/* Used to check for duplicates here, but that can
- cause trouble, as it doesn't check for disable
+ cause trouble, as it doesn't check for disabled
breakpoints. */
mention (b);
breakpoints_changed ();
}
b->section = sals.sals[i].section;
- b->enable = save_enable; /* Restore it, this worked. */
+ b->enable_state = save_enable; /* Restore it, this worked. */
/* Now that this is re-enabled, check_duplicates
can be used. */
- check_duplicates (b->address, b->section);
+ check_duplicates (b);
}
- free ((PTR) sals.sals);
+ xfree (sals.sals);
break;
case bp_watchpoint:
/* So for now, just use a global context. */
if (b->exp)
- free ((PTR) b->exp);
+ xfree (b->exp);
b->exp = parse_expression (b->exp_string);
b->exp_valid_block = innermost_block;
mark = value_mark ();
{
s = b->cond_string;
if (b->cond)
- free ((PTR) b->cond);
+ xfree (b->cond);
b->cond = parse_exp_1 (&s, (struct block *) 0, 0);
}
- if (b->enable == enabled)
+ if (b->enable_state == bp_enabled)
mention (b);
value_free_to_mark (mark);
break;
default:
printf_filtered ("Deleting unknown breakpoint type %d\n", b->type);
/* fall through */
- /* Delete longjmp breakpoints, they will be reset later by
- breakpoint_re_set. */
+ /* Delete longjmp and overlay event breakpoints; they will be
+ reset later by breakpoint_re_set. */
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_overlay_event:
delete_breakpoint (b);
break;
starts and we really don't want to touch it. */
case bp_shlib_event:
+ /* Like bp_shlib_event, this breakpoint type is special.
+ Once it is set up, we do not want to touch it. */
+ case bp_thread_event:
+
/* Keep temporary breakpoints, which can be encountered when we step
over a dlopen call and SOLIB_ADD is resetting the breakpoints.
Otherwise these should have been blown away via the cleanup chain
/* Re-set all breakpoints after symbols have been re-loaded. */
void
-breakpoint_re_set ()
+breakpoint_re_set (void)
{
struct breakpoint *b, *temp;
enum language save_language;
set_language (save_language);
input_radix = save_input_radix;
-#ifdef GET_LONGJMP_TARGET
- create_longjmp_breakpoint ("longjmp");
- create_longjmp_breakpoint ("_longjmp");
- create_longjmp_breakpoint ("siglongjmp");
- create_longjmp_breakpoint ("_siglongjmp");
- create_longjmp_breakpoint (NULL);
-#endif
-
-#if 0
- /* Took this out (temporarily at least), since it produces an extra
- blank line at startup. This messes up the gdbtests. -PB */
- /* Blank line to finish off all those mention() messages we just printed. */
- printf_filtered ("\n");
-#endif
+ if (GET_LONGJMP_TARGET_P ())
+ {
+ create_longjmp_breakpoint ("longjmp");
+ create_longjmp_breakpoint ("_longjmp");
+ create_longjmp_breakpoint ("siglongjmp");
+ create_longjmp_breakpoint ("_siglongjmp");
+ create_longjmp_breakpoint (NULL);
+ }
+
+ create_overlay_event_breakpoint ("_ovly_debug_event");
}
\f
-/* Set ignore-count of breakpoint number BPTNUM to COUNT.
- If from_tty is nonzero, it prints a message to that effect,
- which ends with a period (no newline). */
-
/* Reset the thread number of this breakpoint:
- If the breakpoint is for all threads, leave it as-is.
- - Else, reset it to the current thread for inferior_pid. */
+ - Else, reset it to the current thread for inferior_ptid. */
void
-breakpoint_re_set_thread (b)
- struct breakpoint *b;
+breakpoint_re_set_thread (struct breakpoint *b)
{
if (b->thread != -1)
{
- if (in_thread_list (inferior_pid))
- b->thread = pid_to_thread_id (inferior_pid);
+ if (in_thread_list (inferior_ptid))
+ b->thread = pid_to_thread_id (inferior_ptid);
}
}
+/* Set ignore-count of breakpoint number BPTNUM to COUNT.
+ If from_tty is nonzero, it prints a message to that effect,
+ which ends with a period (no newline). */
+
void
-set_ignore_count (bptnum, count, from_tty)
- int bptnum, count, from_tty;
+set_ignore_count (int bptnum, int count, int from_tty)
{
register struct breakpoint *b;
if (b->number == bptnum)
{
b->ignore_count = count;
- if (!from_tty)
- return;
- else if (count == 0)
- printf_filtered ("Will stop next time breakpoint %d is reached.",
- bptnum);
- else if (count == 1)
- printf_filtered ("Will ignore next crossing of breakpoint %d.",
- bptnum);
- else
- printf_filtered ("Will ignore next %d crossings of breakpoint %d.",
- count, bptnum);
+ if (from_tty)
+ {
+ if (count == 0)
+ printf_filtered ("Will stop next time breakpoint %d is reached.",
+ bptnum);
+ else if (count == 1)
+ printf_filtered ("Will ignore next crossing of breakpoint %d.",
+ bptnum);
+ else
+ printf_filtered ("Will ignore next %d crossings of breakpoint %d.",
+ count, bptnum);
+ }
breakpoints_changed ();
+ breakpoint_modify_event (b->number);
return;
}
/* Clear the ignore counts of all breakpoints. */
void
-breakpoint_clear_ignore_counts ()
+breakpoint_clear_ignore_counts (void)
{
struct breakpoint *b;
/* Command to set ignore-count of breakpoint N to COUNT. */
static void
-ignore_command (args, from_tty)
- char *args;
- int from_tty;
+ignore_command (char *args, int from_tty)
{
char *p = args;
register int num;
error_no_arg ("a breakpoint number");
num = get_number (&p);
-
+ if (num == 0)
+ error ("bad breakpoint number: '%s'", args);
if (*p == 0)
error ("Second argument (specified ignore-count) is missing.");
set_ignore_count (num,
longest_to_int (value_as_long (parse_and_eval (p))),
from_tty);
- printf_filtered ("\n");
- breakpoints_changed ();
+ if (from_tty)
+ printf_filtered ("\n");
}
\f
/* Call FUNCTION on each of the breakpoints
whose numbers are given in ARGS. */
static void
-map_breakpoint_numbers (args, function)
- char *args;
- void (*function) PARAMS ((struct breakpoint *));
+map_breakpoint_numbers (char *args, void (*function) (struct breakpoint *))
{
register char *p = args;
char *p1;
register int num;
- register struct breakpoint *b;
+ register struct breakpoint *b, *tmp;
+ int match;
if (p == 0)
error_no_arg ("one or more breakpoint numbers");
while (*p)
{
+ match = 0;
p1 = p;
- num = get_number (&p1);
-
- ALL_BREAKPOINTS (b)
- if (b->number == num)
+ num = get_number_or_range (&p1);
+ if (num == 0)
{
- struct breakpoint *related_breakpoint = b->related_breakpoint;
- function (b);
- if (related_breakpoint)
- function (related_breakpoint);
- goto win;
+ warning ("bad breakpoint number at or near '%s'", p);
+ }
+ else
+ {
+ ALL_BREAKPOINTS_SAFE (b, tmp)
+ if (b->number == num)
+ {
+ struct breakpoint *related_breakpoint = b->related_breakpoint;
+ match = 1;
+ function (b);
+ if (related_breakpoint)
+ function (related_breakpoint);
+ break;
+ }
+ if (match == 0)
+ printf_unfiltered ("No breakpoint number %d.\n", num);
}
- printf_unfiltered ("No breakpoint number %d.\n", num);
- win:
p = p1;
}
}
+/* Set ignore-count of breakpoint number BPTNUM to COUNT.
+ If from_tty is nonzero, it prints a message to that effect,
+ which ends with a period (no newline). */
+
void
-disable_breakpoint (bpt)
- struct breakpoint *bpt;
+disable_breakpoint (struct breakpoint *bpt)
{
/* Never disable a watchpoint scope breakpoint; we want to
hit them when we leave scope so we can delete both the
return;
/* You can't disable permanent breakpoints. */
- if (bpt->enable == permanent)
+ if (bpt->enable_state == bp_permanent)
return;
- bpt->enable = disabled;
+ bpt->enable_state = bp_disabled;
- check_duplicates (bpt->address, bpt->section);
+ check_duplicates (bpt);
if (modify_breakpoint_hook)
modify_breakpoint_hook (bpt);
/* ARGSUSED */
static void
-disable_command (args, from_tty)
- char *args;
- int from_tty;
+disable_command (char *args, int from_tty)
{
register struct breakpoint *bpt;
if (args == 0)
}
static void
-do_enable_breakpoint (bpt, disposition)
- struct breakpoint *bpt;
- enum bpdisp disposition;
+do_enable_breakpoint (struct breakpoint *bpt, enum bpdisp disposition)
{
struct frame_info *save_selected_frame = NULL;
int save_selected_frame_level = -1;
error ("Hardware breakpoints used exceeds limit.");
}
- if (bpt->enable != permanent)
- bpt->enable = enabled;
+ if (bpt->enable_state != bp_permanent)
+ bpt->enable_state = bp_enabled;
bpt->disposition = disposition;
- check_duplicates (bpt->address, bpt->section);
+ check_duplicates (bpt);
breakpoints_changed ();
if (bpt->type == bp_watchpoint ||
if (bpt->exp_valid_block != NULL)
{
struct frame_info *fr =
-
- /* Ensure that we have the current frame. Else, this
- next query may pessimistically be answered as, "No,
- not within current scope". */
- get_current_frame ();
- fr = find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+ fr = frame_find_by_id (bpt->watchpoint_frame);
if (fr == NULL)
{
printf_filtered ("\
Cannot enable watchpoint %d because the block in which its expression\n\
is valid is not currently in scope.\n", bpt->number);
- bpt->enable = disabled;
+ bpt->enable_state = bp_disabled;
return;
}
save_selected_frame = selected_frame;
- save_selected_frame_level = selected_frame_level;
- select_frame (fr, -1);
+ save_selected_frame_level = frame_relative_level (selected_frame);
+ select_frame (fr);
}
value_free (bpt->val);
printf_filtered ("\
Cannot enable watchpoint %d because target watch resources\n\
have been allocated for other watchpoints.\n", bpt->number);
- bpt->enable = disabled;
+ bpt->enable_state = bp_disabled;
value_free_to_mark (mark);
return;
}
}
if (save_selected_frame_level >= 0)
- select_and_print_frame (save_selected_frame,
- save_selected_frame_level);
+ select_frame (save_selected_frame);
value_free_to_mark (mark);
}
if (modify_breakpoint_hook)
}
void
-enable_breakpoint (bpt)
- struct breakpoint *bpt;
+enable_breakpoint (struct breakpoint *bpt)
{
do_enable_breakpoint (bpt, bpt->disposition);
}
/* ARGSUSED */
static void
-enable_command (args, from_tty)
- char *args;
- int from_tty;
+enable_command (char *args, int from_tty)
{
register struct breakpoint *bpt;
if (args == 0)
}
static void
-enable_once_breakpoint (bpt)
- struct breakpoint *bpt;
+enable_once_breakpoint (struct breakpoint *bpt)
{
- do_enable_breakpoint (bpt, disable);
+ do_enable_breakpoint (bpt, disp_disable);
}
/* ARGSUSED */
static void
-enable_once_command (args, from_tty)
- char *args;
- int from_tty;
+enable_once_command (char *args, int from_tty)
{
map_breakpoint_numbers (args, enable_once_breakpoint);
}
static void
-enable_delete_breakpoint (bpt)
- struct breakpoint *bpt;
+enable_delete_breakpoint (struct breakpoint *bpt)
{
- do_enable_breakpoint (bpt, del);
+ do_enable_breakpoint (bpt, disp_del);
}
/* ARGSUSED */
static void
-enable_delete_command (args, from_tty)
- char *args;
- int from_tty;
+enable_delete_command (char *args, int from_tty)
{
map_breakpoint_numbers (args, enable_delete_breakpoint);
}
/* Use default_breakpoint_'s, or nothing if they aren't valid. */
struct symtabs_and_lines
-decode_line_spec_1 (string, funfirstline)
- char *string;
- int funfirstline;
+decode_line_spec_1 (char *string, int funfirstline)
{
struct symtabs_and_lines sals;
if (string == 0)
}
\f
void
-_initialize_breakpoint ()
+_initialize_breakpoint (void)
{
struct cmd_list_element *c;
add_com ("condition", class_breakpoint, condition_command,
"Specify breakpoint number N to break only if COND is true.\n\
Usage is `condition N COND', where N is an integer and COND is an\n\
-expression to be evaluated whenever breakpoint N is reached. ");
+expression to be evaluated whenever breakpoint N is reached.");
- add_com ("tbreak", class_breakpoint, tbreak_command,
- "Set a temporary breakpoint. Args like \"break\" command.\n\
+ c = add_com ("tbreak", class_breakpoint, tbreak_command,
+ "Set a temporary breakpoint. Args like \"break\" command.\n\
Like \"break\" except the breakpoint is only temporary,\n\
so it will be deleted when hit. Equivalent to \"break\" followed\n\
by using \"enable delete\" on the breakpoint number.");
- add_com ("txbreak", class_breakpoint, tbreak_at_finish_command,
- "Set temporary breakpoint at procedure exit. Either there should\n\
-be no argument or the argument must be a depth.\n");
+ set_cmd_completer (c, location_completer);
- add_com ("hbreak", class_breakpoint, hbreak_command,
- "Set a hardware assisted breakpoint. Args like \"break\" command.\n\
+ c = add_com ("hbreak", class_breakpoint, hbreak_command,
+ "Set a hardware assisted breakpoint. Args like \"break\" command.\n\
Like \"break\" except the breakpoint requires hardware support,\n\
some target hardware may not have this support.");
+ set_cmd_completer (c, location_completer);
- add_com ("thbreak", class_breakpoint, thbreak_command,
- "Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
+ c = add_com ("thbreak", class_breakpoint, thbreak_command,
+ "Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
Like \"hbreak\" except the breakpoint is only temporary,\n\
so it will be deleted when hit.");
+ set_cmd_completer (c, location_completer);
add_prefix_cmd ("enable", class_breakpoint, enable_command,
"Enable some breakpoints.\n\
\n\
See also the \"delete\" command which clears breakpoints by number.", NULL));
- add_com ("break", class_breakpoint, break_command,
- concat ("Set breakpoint at specified line or function.\n\
+ c = add_com ("break", class_breakpoint, break_command,
+ concat ("Set breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, break at start of code for that line.\n\
If function is specified, break at start of code for that function.\n\
Multiple breakpoints at one place are permitted, and useful if conditional.\n\
\n\
Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
+ set_cmd_completer (c, location_completer);
+
add_com_alias ("b", "break", class_run, 1);
add_com_alias ("br", "break", class_run, 1);
add_com_alias ("bre", "break", class_run, 1);
add_com_alias ("brea", "break", class_run, 1);
- add_com ("xbreak", class_breakpoint, break_at_finish_command,
- concat ("Set breakpoint at procedure exit. \n\
-Argument may be function name, or \"*\" and an address.\n\
-If function is specified, break at end of code for that function.\n\
-If an address is specified, break at the end of the function that contains \n\
-that exact address.\n",
- "With no arg, uses current execution address of selected stack frame.\n\
-This is useful for breaking on return to a stack frame.\n\
-\n\
-Multiple breakpoints at one place are permitted, and useful if conditional.\n\
-\n\
-Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
- add_com_alias ("xb", "xbreak", class_breakpoint, 1);
- add_com_alias ("xbr", "xbreak", class_breakpoint, 1);
- add_com_alias ("xbre", "xbreak", class_breakpoint, 1);
- add_com_alias ("xbrea", "xbreak", class_breakpoint, 1);
-
- if (xdb_commands)
+ if (xdb_commands)
{
add_com_alias ("ba", "break", class_breakpoint, 1);
add_com_alias ("bu", "ubreak", class_breakpoint, 1);
- add_com ("bx", class_breakpoint, break_at_finish_at_depth_command,
- "Set breakpoint at procedure exit. Either there should\n\
-be no argument or the argument must be a depth.\n");
}
if (dbx_commands)
so it will be deleted when hit. Equivalent to \"catch\" followed\n\
by using \"enable delete\" on the catchpoint number.");
- add_com ("watch", class_breakpoint, watch_command,
- "Set a watchpoint for an expression.\n\
+ c = add_com ("watch", class_breakpoint, watch_command,
+ "Set a watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
an expression changes.");
+ set_cmd_completer (c, location_completer);
- add_com ("rwatch", class_breakpoint, rwatch_command,
- "Set a read watchpoint for an expression.\n\
+ c = add_com ("rwatch", class_breakpoint, rwatch_command,
+ "Set a read watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
an expression is read.");
+ set_cmd_completer (c, location_completer);
- add_com ("awatch", class_breakpoint, awatch_command,
- "Set a watchpoint for an expression.\n\
+ c = add_com ("awatch", class_breakpoint, awatch_command,
+ "Set a watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
an expression is either read or written.");
+ set_cmd_completer (c, location_completer);
add_info ("watchpoints", breakpoints_info,
"Synonym for ``info breakpoints''.");