/* Everything about breakpoints, for GDB.
- Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995
+ Free Software Foundation, Inc.
This file is part of GDB.
#include "ctype.h"
#include "command.h"
#include "inferior.h"
+#include "thread.h"
#include "target.h"
#include "language.h"
#include <string.h>
#include "demangle.h"
+#include "annotate.h"
/* local function prototypes */
static void
disable_command PARAMS ((char *, int));
-static void
-disable_breakpoint PARAMS ((struct breakpoint *));
-
static void
enable_command PARAMS ((char *, int));
-static void
-enable_breakpoint PARAMS ((struct breakpoint *));
-
static void
map_breakpoint_numbers PARAMS ((char *, void (*)(struct breakpoint *)));
static void
watch_command PARAMS ((char *, int));
+static int
+can_use_hardware_watchpoint PARAMS ((struct value *));
+
static void
tbreak_command PARAMS ((char *, int));
static void
set_breakpoint_count PARAMS ((int));
+static int
+remove_breakpoint PARAMS ((struct breakpoint *));
extern int addressprint; /* Print machine addresses? */
-extern int demangle; /* Print de-mangled symbol names? */
/* Are we executing breakpoint commands? */
static int executing_breakpoint_commands;
b? (tmp=b->next, 1): 0; \
b = tmp)
+/* Provide defaults for systems that don't support hardware watchpoints. */
+
+#ifndef TARGET_CAN_USE_HARDWARE_WATCHPOINT
+
+/* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
+ one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
+ bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
+ (including this one?). OTHERTYPE is who knows what... */
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) 0
+
+/* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes. TYPE is 1
+ for read and 2 for read/write accesses. Returns 0 for success, non-zero for
+ failure. */
+
+#define target_remove_watchpoint(ADDR,LEN,TYPE) -1
+#define target_insert_watchpoint(ADDR,LEN,TYPE) -1
+#endif
+
+#ifndef target_insert_hw_breakpoint
+#define target_remove_hw_breakpoint(ADDR,SHADOW) -1
+#define target_insert_hw_breakpoint(ADDR,SHADOW) -1
+#endif
+
+#ifndef target_stopped_data_address
+#define target_stopped_data_address() 0
+#endif
+
+/* True if breakpoint hit counts should be displayed in breakpoint info. */
+
+int show_breakpoint_hit_counts = 1;
+
/* Chain of all breakpoints defined. */
struct breakpoint *breakpoint_chain;
static int breakpoint_count;
/* Set breakpoint count to NUM. */
+
static void
set_breakpoint_count (num)
int num;
value_from_longest (builtin_type_int, (LONGEST) num));
}
+/* Used in run_command to zero the hit count when a new run starts. */
+
+void
+clear_breakpoint_hit_counts ()
+{
+ struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+ b->hit_count = 0;
+}
+
/* Default address, symtab and line to put a breakpoint at
for "break" command with no arg.
if default_breakpoint_valid is zero, the other three are
CORE_ADDR default_breakpoint_address;
struct symtab *default_breakpoint_symtab;
int default_breakpoint_line;
-
-/* Flag indicating extra verbosity for xgdb. */
-extern int xgdb_verbose;
\f
/* *PP is a string denoting a breakpoint. Get the number of the breakpoint.
Advance *PP after the string and any trailing whitespace.
to pass to lookup_internalvar(). */
char *varname;
char *start = ++p;
- value val;
+ value_ptr val;
while (isalnum (*p) || *p == '_')
p++;
if (*arg)
error ("Junk at end of expression");
}
+ breakpoints_changed ();
return;
}
l = read_command_lines ();
free_command_lines (&b->commands);
b->commands = l;
+ breakpoints_changed ();
return;
}
error ("No breakpoint number %d.", bnum);
struct breakpoint *b;
if (memory_breakpoint_size < 0)
- /* No breakpoints on this machine. */
+ /* No breakpoints on this machine. FIXME: This should be
+ dependent on the debugging target. Probably want
+ target_insert_breakpoint to return a size, saying how many
+ bytes of the shadow contents are used, or perhaps have
+ something like target_xfer_shadow. */
return target_read_memory (memaddr, myaddr, len);
ALL_BREAKPOINTS (b)
{
- if (b->type == bp_watchpoint || !b->inserted)
+ if (b->type == bp_watchpoint
+ || b->type == bp_hardware_watchpoint
+ || b->type == bp_read_watchpoint
+ || b->type == bp_access_watchpoint
+ || !b->inserted)
continue;
else if (b->address + memory_breakpoint_size <= memaddr)
/* The breakpoint is entirely before the chunk of memory
ALL_BREAKPOINTS (b)
if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
&& b->enable != disabled
&& ! b->inserted
&& ! b->duplicate)
{
- val = target_insert_breakpoint(b->address, b->shadow_contents);
+ if (b->type == bp_hardware_breakpoint)
+ val = target_insert_hw_breakpoint(b->address, b->shadow_contents);
+ else
+ val = target_insert_breakpoint(b->address, b->shadow_contents);
if (val)
{
/* Can't set the breakpoint. */
b->enable = disabled;
if (!disabled_breaks)
{
- fprintf (stderr,
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr,
"Cannot insert breakpoint %d:\n", b->number);
printf_filtered ("Disabling shared library breakpoints:\n");
}
else
#endif
{
- fprintf (stderr, "Cannot insert breakpoint %d:\n", b->number);
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
#ifdef ONE_PROCESS_WRITETEXT
- fprintf (stderr,
+ fprintf_unfiltered (gdb_stderr,
"The same program may be running in another process.\n");
#endif
memory_error (val, b->address); /* which bombs us out */
else
b->inserted = 1;
}
+ else if ((b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint)
+ && b->enable == enabled
+ && ! b->inserted
+ && ! b->duplicate)
+ {
+ struct frame_info *saved_frame;
+ int saved_level, within_current_scope;
+ value_ptr mark = value_mark ();
+ value_ptr v;
+
+ /* Save the current frame and level so we can restore it after
+ evaluating the watchpoint expression on its own frame. */
+ saved_frame = selected_frame;
+ saved_level = selected_frame_level;
+
+ /* Determine if the watchpoint is within scope. */
+ if (b->exp_valid_block == NULL)
+ within_current_scope = 1;
+ else
+ {
+ struct frame_info *fi =
+ find_frame_addr_in_frame_chain (b->watchpoint_frame);
+ within_current_scope = (fi != NULL);
+ if (within_current_scope)
+ select_frame (fi, -1);
+ }
+
+ if (within_current_scope)
+ {
+ /* Evaluate the expression and cut the chain of values
+ produced off from the value chain. */
+ v = evaluate_expression (b->exp);
+ value_release_to_mark (mark);
+
+ b->val_chain = v;
+ b->inserted = 1;
+
+ /* Look at each value on the value chain. */
+ for ( ; v; v=v->next)
+ {
+ /* If it's a memory location, then we must watch it. */
+ if (v->lval == lval_memory)
+ {
+ int addr, len, type;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ type = 0;
+ if (b->type == bp_read_watchpoint)
+ type = 1;
+ else if (b->type == bp_access_watchpoint)
+ type = 2;
+
+ val = target_insert_watchpoint (addr, len, type);
+ if (val == -1)
+ {
+ b->inserted = 0;
+ break;
+ }
+ val = 0;
+ }
+ }
+ /* Failure to insert a watchpoint on any memory value in the
+ value chain brings us here. */
+ if (!b->inserted)
+ warning ("Hardware watchpoint %d: Could not insert watchpoint\n",
+ b->number);
+ }
+ else
+ {
+ printf_filtered ("\
+Hardware watchpoint %d deleted because the program has left the block in\n\
+which its expression is valid.\n", b->number);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
+ }
+
+ /* Restore the frame and level. */
+ select_frame (saved_frame, saved_level);
+ }
if (disabled_breaks)
printf_filtered ("\n");
return val;
}
+
int
remove_breakpoints ()
{
register struct breakpoint *b;
int val;
-#ifdef BREAKPOINT_DEBUG
- printf ("Removing breakpoints.\n");
-#endif /* BREAKPOINT_DEBUG */
-
ALL_BREAKPOINTS (b)
- if (b->type != bp_watchpoint && b->inserted)
- {
- val = target_remove_breakpoint(b->address, b->shadow_contents);
- if (val)
- return val;
- b->inserted = 0;
-#ifdef BREAKPOINT_DEBUG
- printf ("Removed breakpoint at %s",
- local_hex_string(b->address));
- printf (", shadow %s",
- local_hex_string(b->shadow_contents[0]));
- printf (", %s.\n",
- local_hex_string(b->shadow_contents[1]));
-#endif /* BREAKPOINT_DEBUG */
- }
+ {
+ if (b->inserted)
+ {
+ val = remove_breakpoint (b);
+ if (val != 0)
+ return val;
+ }
+ }
+ return 0;
+}
+
+static int
+remove_breakpoint (b)
+ struct breakpoint *b;
+{
+ int val;
+
+ if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint)
+ {
+ if (b->type == bp_hardware_breakpoint)
+ val = target_remove_hw_breakpoint(b->address, b->shadow_contents);
+ else
+ val = target_remove_breakpoint(b->address, b->shadow_contents);
+ if (val)
+ return val;
+ b->inserted = 0;
+ }
+ else if ((b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint)
+ && b->enable == enabled
+ && ! b->duplicate)
+ {
+ value_ptr v, n;
+
+ b->inserted = 0;
+ /* Walk down the saved value chain. */
+ for (v = b->val_chain; v; v = v->next)
+ {
+ /* For each memory reference remove the watchpoint
+ at that address. */
+ if (v->lval == lval_memory)
+ {
+ int addr, len;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ val = target_remove_watchpoint (addr, len, b->type);
+ if (val == -1)
+ b->inserted = 1;
+ val = 0;
+ }
+ }
+ /* Failure to remove any of the hardware watchpoints comes here. */
+ if (b->inserted)
+ error ("Hardware watchpoint %d: Could not remove watchpoint\n",
+ b->number);
+
+ /* Free the saved value chain. We will construct a new one
+ the next time the watchpoint is inserted. */
+ for (v = b->val_chain; v; v = n)
+ {
+ n = v->next;
+ value_free (v);
+ }
+ b->val_chain = NULL;
+ }
return 0;
}
-/* Clear the "inserted" flag in all breakpoints.
- This is done when the inferior is loaded. */
+/* Clear the "inserted" flag in all breakpoints. */
void
mark_breakpoints_out ()
b->inserted = 0;
}
+/* Clear the "inserted" flag in all breakpoints and delete any breakpoints
+ which should go away between runs of the program. */
+
+void
+breakpoint_init_inferior ()
+{
+ register struct breakpoint *b, *temp;
+
+ ALL_BREAKPOINTS_SAFE (b, temp)
+ {
+ b->inserted = 0;
+
+ /* If the call dummy breakpoint is at the entry point it will
+ cause problems when the inferior is rerun, so we better
+ get rid of it. */
+ if (b->type == bp_call_dummy)
+ delete_breakpoint (b);
+
+ /* Likewise for scope breakpoints. */
+ if (b->type == bp_watchpoint_scope)
+ delete_breakpoint (b);
+
+ /* Likewise for watchpoints on local expressions. */
+ if ((b->type == bp_watchpoint || b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint || b->type == bp_access_watchpoint)
+ && b->exp_valid_block != NULL)
+ delete_breakpoint (b);
+ }
+}
+
/* breakpoint_here_p (PC) returns 1 if an enabled breakpoint exists at PC.
When continuing from a location with a breakpoint,
we actually single step once before calling insert_breakpoints. */
return 0;
}
+
+/* Return nonzero if FRAME is a dummy frame. We can't use PC_IN_CALL_DUMMY
+ because figuring out the saved SP would take too much time, at least using
+ get_saved_register on the 68k. This means that for this function to
+ work right a port must use the bp_call_dummy breakpoint. */
+
+int
+frame_in_dummy (frame)
+ struct frame_info *frame;
+{
+ struct breakpoint *b;
+
+#ifdef CALL_DUMMY
+ ALL_BREAKPOINTS (b)
+ {
+ static unsigned LONGEST dummy[] = CALL_DUMMY;
+
+ if (b->type == bp_call_dummy
+ && b->frame == frame->frame
+
+ /* We need to check the PC as well as the frame on the sparc,
+ for signals.exp in the testsuite. */
+ && (frame->pc
+ >= (b->address
+ - sizeof (dummy) / sizeof (LONGEST) * REGISTER_SIZE))
+ && frame->pc <= b->address)
+ return 1;
+ }
+#endif /* CALL_DUMMY */
+ return 0;
+}
+
+/* breakpoint_match_thread (PC, PID) returns true if the breakpoint at PC
+ is valid for process/thread PID. */
+
+int
+breakpoint_thread_match (pc, pid)
+ CORE_ADDR pc;
+ int pid;
+{
+ struct breakpoint *b;
+ int thread;
+
+ thread = pid_to_thread_id (pid);
+
+ ALL_BREAKPOINTS (b)
+ if (b->enable != disabled
+ && b->address == pc
+ && (b->thread == -1 || b->thread == thread))
+ return 1;
+
+ return 0;
+}
+
\f
/* bpstat stuff. External routines' interfaces are documented
in breakpoint.h. */
{
bpstat p = NULL;
bpstat tmp;
- bpstat retval;
+ bpstat retval = NULL;
if (bs == NULL)
return bs;
{
bpstat bs;
struct cleanup *old_chain;
+ struct command_line *cmd;
executing_breakpoint_commands = 1;
old_chain = make_cleanup (cleanup_executing_breakpoints, 0);
breakpoint_proceeded = 0;
for (; bs != NULL; bs = bs->next)
{
- while (bs->commands)
+ cmd = bs->commands;
+ while (cmd != NULL)
{
- char *line = bs->commands->line;
- bs->commands = bs->commands->next;
- execute_command (line, 0);
- /* If the inferior is proceeded by the command, bomb out now.
- The bpstat chain has been blown away by wait_for_inferior.
- But since execution has stopped again, there is a new bpstat
- to look at, so start over. */
- if (breakpoint_proceeded)
- goto top;
+ execute_control_command (cmd);
+ cmd = cmd->next;
}
+ if (breakpoint_proceeded)
+ /* The inferior is proceeded by the command; bomb out now.
+ The bpstat chain has been blown away by wait_for_inferior.
+ But since execution has stopped again, there is a new bpstat
+ to look at, so start over. */
+ goto top;
+ else
+ bs->commands = NULL;
}
executing_breakpoint_commands = 0;
which has since been deleted. */
if (bs->breakpoint_at == NULL
|| (bs->breakpoint_at->type != bp_breakpoint
- && bs->breakpoint_at->type != bp_watchpoint))
- return 0;
-
- /* If bpstat_stop_status says don't print, OK, we won't. An example
- circumstance is when we single-stepped for both a watchpoint and
- for a "stepi" instruction. The bpstat says that the watchpoint
- explains the stop, but we shouldn't print because the watchpoint's
- value didn't change -- and the real reason we are stopping here
- rather than continuing to step (as the watchpoint would've had us do)
- is because of the "stepi". */
- if (!bs->print)
+ && bs->breakpoint_at->type != bp_hardware_breakpoint
+ && bs->breakpoint_at->type != bp_watchpoint
+ && bs->breakpoint_at->type != bp_read_watchpoint
+ && bs->breakpoint_at->type != bp_access_watchpoint
+ && bs->breakpoint_at->type != bp_hardware_watchpoint))
return 0;
- if (bs->breakpoint_at->type == bp_breakpoint)
+ if (bs->breakpoint_at->type == bp_breakpoint ||
+ bs->breakpoint_at->type == bp_hardware_breakpoint)
{
/* I think the user probably only wants to see one breakpoint
number, not all of them. */
+ annotate_breakpoint (bs->breakpoint_at->number);
printf_filtered ("\nBreakpoint %d, ", bs->breakpoint_at->number);
return 0;
}
-
- if (bs->old_val != NULL)
+ else if ((bs->old_val != NULL) &&
+ (bs->breakpoint_at->type == bp_watchpoint ||
+ bs->breakpoint_at->type == bp_access_watchpoint ||
+ bs->breakpoint_at->type == bp_hardware_watchpoint))
{
- printf_filtered ("\nWatchpoint %d, ", bs->breakpoint_at->number);
- print_expression (bs->breakpoint_at->exp, stdout);
+ annotate_watchpoint (bs->breakpoint_at->number);
+ mention (bs->breakpoint_at);
printf_filtered ("\nOld value = ");
- value_print (bs->old_val, stdout, 0, Val_pretty_default);
+ value_print (bs->old_val, gdb_stdout, 0, Val_pretty_default);
printf_filtered ("\nNew value = ");
- value_print (bs->breakpoint_at->val, stdout, 0,
+ value_print (bs->breakpoint_at->val, gdb_stdout, 0,
Val_pretty_default);
printf_filtered ("\n");
value_free (bs->old_val);
bs->old_val = NULL;
- return 0;
+ /* More than one watchpoint may have been triggered. */
+ return -1;
+ }
+ else if (bs->breakpoint_at->type == bp_access_watchpoint ||
+ bs->breakpoint_at->type == bp_read_watchpoint)
+ {
+ mention (bs->breakpoint_at);
+ printf_filtered ("\nValue = ");
+ value_print (bs->breakpoint_at->val, gdb_stdout, 0,
+ Val_pretty_default);
+ printf_filtered ("\n");
+ return -1;
}
/* We can't deal with it. Maybe another member of the bpstat chain can. */
return -1;
if (bs->next)
return bpstat_print (bs->next);
- fprintf_filtered (stderr, "gdb internal error: in bpstat_print\n");
+ /* We reached the end of the chain without printing anything. */
return 0;
}
breakpoint_cond_eval (exp)
char *exp;
{
- return !value_true (evaluate_expression ((struct expression *)exp));
+ value_ptr mark = value_mark ();
+ int i = !value_true (evaluate_expression ((struct expression *)exp));
+ value_free_to_mark (mark);
+ return i;
}
/* Allocate a new bpstat and chain it to the current one. */
bs->breakpoint_at = b;
/* If the condition is false, etc., don't do the commands. */
bs->commands = NULL;
- bs->momentary = b->disposition == delete;
bs->old_val = NULL;
bs->print_it = print_it_normal;
return bs;
}
-
+\f
/* Possible return values for watchpoint_check (this can't be an enum
because of check_errors). */
-/* The watchpoint has been disabled. */
-#define WP_DISABLED 1
+/* The watchpoint has been deleted. */
+#define WP_DELETED 1
/* The value has changed. */
#define WP_VALUE_CHANGED 2
/* The value has not changed. */
#define WP_VALUE_NOT_CHANGED 3
+#define BP_TEMPFLAG 1
+#define BP_HARDWAREFLAG 2
+
/* Check watchpoint condition. */
+
static int
watchpoint_check (p)
- PTR p;
+ char *p;
{
bpstat bs = (bpstat) p;
+ struct breakpoint *b;
+ struct frame_info *saved_frame, *fr;
+ int within_current_scope, saved_level;
- int within_current_scope;
- if (bs->breakpoint_at->exp_valid_block != NULL)
- within_current_scope =
- contained_in (get_selected_block (), bs->breakpoint_at->exp_valid_block);
- else
- within_current_scope = 1;
+ b = bs->breakpoint_at;
+ if (b->exp_valid_block == NULL)
+ within_current_scope = 1;
+ else
+ {
+ /* There is no current frame at this moment. If we're going to have
+ any chance of handling watchpoints on local variables, we'll need
+ the frame chain (so we can determine if we're in scope). */
+ reinit_frame_cache();
+ fr = find_frame_addr_in_frame_chain (b->watchpoint_frame);
+ within_current_scope = (fr != NULL);
+ if (within_current_scope)
+ /* If we end up stopping, the current frame will get selected
+ in normal_stop. So this call to select_frame won't affect
+ the user. */
+ select_frame (fr, -1);
+ }
+
if (within_current_scope)
{
/* We use value_{,free_to_}mark because it could be a
*long* time before we return to the command level and
- call free_all_values. */
- /* But couldn't we just call free_all_values instead? */
+ call free_all_values. We can't call free_all_values because
+ we might be in the middle of evaluating a function call. */
- value mark = value_mark ();
- value new_val = evaluate_expression (bs->breakpoint_at->exp);
- if (!value_equal (bs->breakpoint_at->val, new_val))
+ value_ptr mark = value_mark ();
+ value_ptr new_val = evaluate_expression (bs->breakpoint_at->exp);
+ if (!value_equal (b->val, new_val))
{
release_value (new_val);
value_free_to_mark (mark);
- bs->old_val = bs->breakpoint_at->val;
- bs->breakpoint_at->val = new_val;
+ bs->old_val = b->val;
+ b->val = new_val;
/* We will stop here */
return WP_VALUE_CHANGED;
}
So we can't even detect the first assignment to it and
watch after that (since the garbage may or may not equal
the first value assigned). */
- bs->breakpoint_at->enable = disabled;
printf_filtered ("\
-Watchpoint %d disabled because the program has left the block in\n\
+Watchpoint %d deleted because the program has left the block in\n\
which its expression is valid.\n", bs->breakpoint_at->number);
- return WP_DISABLED;
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
+
+ return WP_DELETED;
}
}
/* This is used when everything which needs to be printed has
already been printed. But we still want to print the frame. */
static int
-print_it_noop (bs)
+print_it_done (bs)
bpstat bs;
{
return 0;
}
+/* This is used when nothing should be printed for this bpstat entry. */
+
+static int
+print_it_noop (bs)
+ bpstat bs;
+{
+ return -1;
+}
+
+/* Get a bpstat associated with having just stopped at address *PC
+ and frame address CORE_ADDRESS. Update *PC to point at the
+ breakpoint (if we hit a breakpoint). NOT_A_BREAKPOINT is nonzero
+ if this is known to not be a real breakpoint (it could still be a
+ watchpoint, though). */
+
/* Determine whether we stopped at a breakpoint, etc, or whether we
don't understand this stop. Result is a chain of bpstat's such that:
if we don't understand the stop, the result is a null pointer.
- if we understand why we stopped, the result is not null, and
- the first element of the chain contains summary "stop" and
- "print" flags for the whole chain.
+ if we understand why we stopped, the result is not null.
Each element of the chain refers to a particular breakpoint or
watchpoint at which we have stopped. (We may have stopped for
*/
-
bpstat
-bpstat_stop_status (pc, frame_address)
+bpstat_stop_status (pc, not_a_breakpoint)
CORE_ADDR *pc;
- FRAME_ADDR frame_address;
+ int not_a_breakpoint;
{
register struct breakpoint *b;
- int stop = 0;
- int print = 0;
CORE_ADDR bp_addr;
#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
/* True if we've hit a breakpoint (as opposed to a watchpoint). */
int real_breakpoint = 0;
#endif
/* Root of the chain of bpstat's */
- struct bpstat root_bs[1];
+ struct bpstats root_bs[1];
/* Pointer to the last thing in the chain currently. */
bpstat bs = root_bs;
+ static char message1[] =
+ "Error evaluating expression for watchpoint %d\n";
+ char message[sizeof (message1) + 30 /* slop */];
/* Get the address where the breakpoint would have been. */
bp_addr = *pc - DECR_PC_AFTER_BREAK;
ALL_BREAKPOINTS (b)
{
- int this_bp_stop;
- int this_bp_print;
-
if (b->enable == disabled)
continue;
- if (b->type != bp_watchpoint && b->address != bp_addr)
+ if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
+ && b->type != bp_hardware_breakpoint
+ && b->address != bp_addr)
+ continue;
+
+/* If defined, then we need to decr pc by this much after a hardware break-
+ point. Presumably should override DECR_PC_AFTER_BREAK, though it doesn't
+ now... */
+
+#ifndef DECR_PC_AFTER_HW_BREAK
+#define DECR_PC_AFTER_HW_BREAK 0
+#endif
+
+ if (b->type == bp_hardware_breakpoint
+ && b->address != (bp_addr - DECR_PC_AFTER_HW_BREAK))
+ continue;
+
+ if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
+ && not_a_breakpoint)
continue;
/* Come here if it's a watchpoint, or if the break address matches */
+ ++(b->hit_count);
+
bs = bpstat_alloc (b, bs); /* Alloc a bpstat to explain stop */
- this_bp_stop = 1;
- this_bp_print = 1;
+ bs->stop = 1;
+ bs->print = 1;
- if (b->type == bp_watchpoint)
+ sprintf (message, message1, b->number);
+ if (b->type == bp_watchpoint || b->type == bp_hardware_watchpoint)
{
- static char message1[] =
- "Error evaluating expression for watchpoint %d\n";
- char message[sizeof (message1) + 30 /* slop */];
- sprintf (message, message1, b->number);
- switch (catch_errors (watchpoint_check, bs, message))
+ switch (catch_errors (watchpoint_check, (char *) bs, message,
+ RETURN_MASK_ALL))
{
- case WP_DISABLED:
+ case WP_DELETED:
/* We've already printed what needs to be printed. */
- bs->print_it = print_it_noop;
+ bs->print_it = print_it_done;
/* Stop. */
break;
case WP_VALUE_CHANGED:
break;
case WP_VALUE_NOT_CHANGED:
/* Don't stop. */
+ bs->print_it = print_it_noop;
+ bs->stop = 0;
continue;
default:
/* Can't happen. */
/* FALLTHROUGH */
case 0:
/* Error from catch_errors. */
- b->enable = disabled;
- printf_filtered ("Watchpoint %d disabled.\n", b->number);
+ printf_filtered ("Watchpoint %d deleted.\n", b->number);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
/* We've already printed what needs to be printed. */
- bs->print_it = print_it_noop;
+ bs->print_it = print_it_done;
+
/* Stop. */
break;
}
}
+ else if (b->type == bp_read_watchpoint || b->type == bp_access_watchpoint)
+ {
+ CORE_ADDR addr;
+ value_ptr v;
+ int found = 0;
+
+ addr = target_stopped_data_address();
+ if (addr == 0) continue;
+ for (v = b->val_chain; v; v = v->next)
+ {
+ if (v->lval == lval_memory)
+ {
+ CORE_ADDR vaddr;
+
+ vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ if (addr == vaddr)
+ found = 1;
+ }
+ }
+ if (found)
+ switch (catch_errors (watchpoint_check, (char *) bs, message,
+ RETURN_MASK_ALL))
+ {
+ case WP_DELETED:
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ /* Stop. */
+ break;
+ case WP_VALUE_CHANGED:
+ case WP_VALUE_NOT_CHANGED:
+ /* Stop. */
+ break;
+ default:
+ /* Can't happen. */
+ case 0:
+ /* Error from catch_errors. */
+ printf_filtered ("Watchpoint %d deleted.\n", b->number);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ break;
+ }
+ }
#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
else
real_breakpoint = 1;
#endif
- if (b->frame && b->frame != frame_address)
- this_bp_stop = 0;
+ if (b->frame && b->frame != (get_current_frame ())->frame)
+ bs->stop = 0;
else
{
- int value_is_zero;
+ int value_is_zero = 0;
if (b->cond)
{
select_frame (get_current_frame (), 0);
value_is_zero
= catch_errors (breakpoint_cond_eval, (char *)(b->cond),
- "Error in testing breakpoint condition:\n");
+ "Error in testing breakpoint condition:\n",
+ RETURN_MASK_ALL);
/* FIXME-someday, should give breakpoint # */
free_all_values ();
}
if (b->cond && value_is_zero)
{
- this_bp_stop = 0;
+ bs->stop = 0;
}
else if (b->ignore_count > 0)
{
b->ignore_count--;
- this_bp_stop = 0;
+ bs->stop = 0;
}
else
{
b->enable = disabled;
bs->commands = b->commands;
if (b->silent)
- this_bp_print = 0;
+ bs->print = 0;
if (bs->commands && STREQ ("silent", bs->commands->line))
{
bs->commands = bs->commands->next;
- this_bp_print = 0;
+ bs->print = 0;
}
}
}
- if (this_bp_stop)
- stop = 1;
- if (this_bp_print)
- print = 1;
+ /* Print nothing for this entry if we dont stop or if we dont print. */
+ if (bs->stop == 0 || bs->print == 0)
+ bs->print_it = print_it_noop;
}
bs->next = NULL; /* Terminate the chain */
bs = root_bs->next; /* Re-grab the head of the chain */
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
if (bs)
{
- bs->stop = stop;
- bs->print = print;
-#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
if (real_breakpoint)
{
*pc = bp_addr;
#if defined (SHIFT_INST_REGS)
- {
- CORE_ADDR pc = read_register (PC_REGNUM);
- CORE_ADDR npc = read_register (NPC_REGNUM);
- if (pc != npc)
- {
- write_register (NNPC_REGNUM, npc);
- write_register (NPC_REGNUM, pc);
- }
- }
+ SHIFT_INST_REGS();
#else /* No SHIFT_INST_REGS. */
write_pc (bp_addr);
#endif /* No SHIFT_INST_REGS. */
}
+ }
#endif /* DECR_PC_AFTER_BREAK != 0. */
+
+ /* The value of a hardware watchpoint hasn't changed, but the
+ intermediate memory locations we are watching may have. */
+ if (bs && ! bs->stop &&
+ (bs->breakpoint_at->type == bp_hardware_watchpoint ||
+ bs->breakpoint_at->type == bp_read_watchpoint ||
+ bs->breakpoint_at->type == bp_access_watchpoint))
+ {
+ remove_breakpoints ();
+ insert_breakpoints ();
}
return bs;
}
+\f
+/* Tell what to do about this bpstat. */
+struct bpstat_what
+bpstat_what (bs)
+ bpstat bs;
+{
+ /* Classify each bpstat as one of the following. */
+ enum class {
+ /* This bpstat element has no effect on the main_action. */
+ no_effect = 0,
+
+ /* There was a watchpoint, stop but don't print. */
+ wp_silent,
+
+ /* There was a watchpoint, stop and print. */
+ wp_noisy,
+
+ /* There was a breakpoint but we're not stopping. */
+ bp_nostop,
+
+ /* There was a breakpoint, stop but don't print. */
+ bp_silent,
+
+ /* There was a breakpoint, stop and print. */
+ bp_noisy,
+
+ /* We hit the longjmp breakpoint. */
+ long_jump,
+
+ /* We hit the longjmp_resume breakpoint. */
+ long_resume,
+
+ /* We hit the step_resume breakpoint. */
+ step_resume,
+
+ /* We hit the through_sigtramp breakpoint. */
+ through_sig,
+
+ /* This is just used to count how many enums there are. */
+ class_last
+ };
+
+ /* Here is the table which drives this routine. So that we can
+ format it pretty, we define some abbreviations for the
+ enum bpstat_what codes. */
+#define keep_c BPSTAT_WHAT_KEEP_CHECKING
+#define stop_s BPSTAT_WHAT_STOP_SILENT
+#define stop_n BPSTAT_WHAT_STOP_NOISY
+#define single BPSTAT_WHAT_SINGLE
+#define setlr BPSTAT_WHAT_SET_LONGJMP_RESUME
+#define clrlr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
+#define clrlrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
+#define sr BPSTAT_WHAT_STEP_RESUME
+#define ts BPSTAT_WHAT_THROUGH_SIGTRAMP
+
+/* "Can't happen." Might want to print an error message.
+ abort() is not out of the question, but chances are GDB is just
+ a bit confused, not unusable. */
+#define err BPSTAT_WHAT_STOP_NOISY
+
+ /* Given an old action and a class, come up with a new action. */
+ /* One interesting property of this table is that wp_silent is the same
+ as bp_silent and wp_noisy is the same as bp_noisy. That is because
+ after stopping, the check for whether to step over a breakpoint
+ (BPSTAT_WHAT_SINGLE type stuff) is handled in proceed() without
+ reference to how we stopped. We retain separate wp_silent and bp_silent
+ codes in case we want to change that someday. */
+
+ /* step_resume entries: a step resume breakpoint overrides another
+ breakpoint of signal handling (see comment in wait_for_inferior
+ at first IN_SIGTRAMP where we set the step_resume breakpoint). */
+ /* We handle the through_sigtramp_breakpoint the same way; having both
+ one of those and a step_resume_breakpoint is probably very rare (?). */
+
+ static const enum bpstat_what_main_action
+ table[(int)class_last][(int)BPSTAT_WHAT_LAST] =
+ {
+ /* old action */
+ /* keep_c stop_s stop_n single setlr clrlr clrlrs sr ts
+ */
+/*no_effect*/ {keep_c,stop_s,stop_n,single, setlr , clrlr , clrlrs, sr, ts},
+/*wp_silent*/ {stop_s,stop_s,stop_n,stop_s, stop_s, stop_s, stop_s, sr, ts},
+/*wp_noisy*/ {stop_n,stop_n,stop_n,stop_n, stop_n, stop_n, stop_n, sr, ts},
+/*bp_nostop*/ {single,stop_s,stop_n,single, setlr , clrlrs, clrlrs, sr, ts},
+/*bp_silent*/ {stop_s,stop_s,stop_n,stop_s, stop_s, stop_s, stop_s, sr, ts},
+/*bp_noisy*/ {stop_n,stop_n,stop_n,stop_n, stop_n, stop_n, stop_n, sr, ts},
+/*long_jump*/ {setlr ,stop_s,stop_n,setlr , err , err , err , sr, ts},
+/*long_resume*/ {clrlr ,stop_s,stop_n,clrlrs, err , err , err , sr, ts},
+/*step_resume*/ {sr ,sr ,sr ,sr , sr , sr , sr , sr, ts},
+/*through_sig*/ {ts ,ts ,ts ,ts , ts , ts , ts , ts, ts}
+ };
+#undef keep_c
+#undef stop_s
+#undef stop_n
+#undef single
+#undef setlr
+#undef clrlr
+#undef clrlrs
+#undef err
+#undef sr
+#undef ts
+ enum bpstat_what_main_action current_action = BPSTAT_WHAT_KEEP_CHECKING;
+ struct bpstat_what retval;
+
+ retval.call_dummy = 0;
+ for (; bs != NULL; bs = bs->next)
+ {
+ enum class bs_class = no_effect;
+ if (bs->breakpoint_at == NULL)
+ /* I suspect this can happen if it was a momentary breakpoint
+ which has since been deleted. */
+ continue;
+ switch (bs->breakpoint_at->type)
+ {
+ case bp_breakpoint:
+ case bp_hardware_breakpoint:
+ case bp_until:
+ case bp_finish:
+ if (bs->stop)
+ {
+ if (bs->print)
+ bs_class = bp_noisy;
+ else
+ bs_class = bp_silent;
+ }
+ else
+ bs_class = bp_nostop;
+ break;
+ case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
+ if (bs->stop)
+ {
+ if (bs->print)
+ bs_class = wp_noisy;
+ else
+ bs_class = wp_silent;
+ }
+ else
+ /* There was a watchpoint, but we're not stopping. This requires
+ no further action. */
+ bs_class = no_effect;
+ break;
+ case bp_longjmp:
+ bs_class = long_jump;
+ break;
+ case bp_longjmp_resume:
+ bs_class = long_resume;
+ break;
+ case bp_step_resume:
+ if (bs->stop)
+ {
+ bs_class = step_resume;
+ }
+ else
+ /* It is for the wrong frame. */
+ bs_class = bp_nostop;
+ break;
+ case bp_through_sigtramp:
+ bs_class = through_sig;
+ break;
+ case bp_watchpoint_scope:
+ bs_class = bp_nostop;
+ break;
+
+ case bp_call_dummy:
+ /* Make sure the action is stop (silent or noisy), so infrun.c
+ pops the dummy frame. */
+ bs_class = bp_silent;
+ retval.call_dummy = 1;
+ break;
+ }
+ current_action = table[(int)bs_class][(int)current_action];
+ }
+ retval.main_action = current_action;
+ return retval;
+}
/* Nonzero if we should step constantly (e.g. watchpoints on machines
without hardware support). This isn't related to a specific bpstat,
register struct symbol *sym;
CORE_ADDR last_addr = (CORE_ADDR)-1;
int found_a_breakpoint = 0;
- static char *bptypes[] = {"breakpoint", "until", "finish", "watchpoint",
- "longjmp", "longjmp resume"};
+ static char *bptypes[] = {"breakpoint", "hw breakpoint",
+ "until", "finish", "watchpoint",
+ "hw watchpoint", "read watchpoint",
+ "acc watchpoint", "longjmp",
+ "longjmp resume", "step resume",
+ "watchpoint scope", "call dummy" };
static char *bpdisps[] = {"del", "dis", "keep"};
static char bpenables[] = "ny";
+ char wrap_indent[80];
- if (!breakpoint_chain)
- {
- printf_filtered ("No breakpoints or watchpoints.\n");
- return;
- }
-
ALL_BREAKPOINTS (b)
if (bnum == -1
|| bnum == b->number)
/* We only print out user settable breakpoints unless the allflag is set. */
if (!allflag
&& b->type != bp_breakpoint
- && b->type != bp_watchpoint)
+ && b->type != bp_hardware_breakpoint
+ && b->type != bp_watchpoint
+ && b->type != bp_read_watchpoint
+ && b->type != bp_access_watchpoint
+ && b->type != bp_hardware_watchpoint)
continue;
if (!found_a_breakpoint++)
- printf_filtered ("Num Type Disp Enb %sWhat\n",
- addressprint ? "Address " : "");
-
- printf_filtered ("%-3d %-14s %-4s %-3c ",
- b->number,
- bptypes[(int)b->type],
- bpdisps[(int)b->disposition],
- bpenables[(int)b->enable]);
+ {
+ annotate_breakpoints_headers ();
+
+ annotate_field (0);
+ printf_filtered ("Num ");
+ annotate_field (1);
+ printf_filtered ("Type ");
+ annotate_field (2);
+ printf_filtered ("Disp ");
+ annotate_field (3);
+ printf_filtered ("Enb ");
+ if (addressprint)
+ {
+ annotate_field (4);
+ printf_filtered ("Address ");
+ }
+ annotate_field (5);
+ printf_filtered ("What\n");
+
+ annotate_breakpoints_table ();
+ }
+
+ annotate_record ();
+ annotate_field (0);
+ printf_filtered ("%-3d ", b->number);
+ annotate_field (1);
+ printf_filtered ("%-14s ", bptypes[(int)b->type]);
+ annotate_field (2);
+ printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
+ annotate_field (3);
+ printf_filtered ("%-3c ", bpenables[(int)b->enable]);
+
+ strcpy (wrap_indent, " ");
+ if (addressprint)
+ strcat (wrap_indent, " ");
switch (b->type)
{
case bp_watchpoint:
- print_expression (b->exp, stdout);
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ annotate_field (5);
+ print_expression (b->exp, gdb_stdout);
break;
+
case bp_breakpoint:
+ case bp_hardware_breakpoint:
case bp_until:
case bp_finish:
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
if (addressprint)
- printf_filtered ("%s ", local_hex_string_custom(b->address, "08"));
+ {
+ annotate_field (4);
+ /* FIXME-32x64: need a print_address_numeric with
+ field width */
+ printf_filtered
+ ("%s ",
+ local_hex_string_custom
+ ((unsigned long) b->address, "08l"));
+ }
+
+ annotate_field (5);
last_addr = b->address;
- if (b->symtab)
+ if (b->source_file)
{
sym = find_pc_function (b->address);
if (sym)
{
- fputs_filtered ("in ", stdout);
- fputs_filtered (SYMBOL_SOURCE_NAME (sym), stdout);
- fputs_filtered (" at ", stdout);
+ fputs_filtered ("in ", gdb_stdout);
+ fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
+ wrap_here (wrap_indent);
+ fputs_filtered (" at ", gdb_stdout);
}
- fputs_filtered (b->symtab->filename, stdout);
+ fputs_filtered (b->source_file, gdb_stdout);
printf_filtered (":%d", b->line_number);
}
else
- print_address_symbolic (b->address, stdout, demangle, " ");
+ print_address_symbolic (b->address, gdb_stdout, demangle, " ");
+ break;
}
printf_filtered ("\n");
if (b->frame)
- printf_filtered ("\tstop only in stack frame at %s\n",
- local_hex_string(b->frame));
+ {
+ annotate_field (6);
+
+ printf_filtered ("\tstop only in stack frame at ");
+ print_address_numeric (b->frame, 1, gdb_stdout);
+ printf_filtered ("\n");
+ }
+
if (b->cond)
{
+ annotate_field (7);
+
printf_filtered ("\tstop only if ");
- print_expression (b->cond, stdout);
+ print_expression (b->cond, gdb_stdout);
printf_filtered ("\n");
}
+
+ if (show_breakpoint_hit_counts && b->hit_count)
+ {
+ /* FIXME should make an annotation for this */
+
+ printf_filtered ("\tbreakpoint already hit %d time%s\n",
+ b->hit_count, (b->hit_count == 1 ? "" : "s"));
+ }
+
if (b->ignore_count)
- printf_filtered ("\tignore next %d hits\n", b->ignore_count);
+ {
+ annotate_field (8);
+
+ printf_filtered ("\tignore next %d hits\n", b->ignore_count);
+ }
+
if ((l = b->commands))
- while (l)
- {
- fputs_filtered ("\t", stdout);
- fputs_filtered (l->line, stdout);
- fputs_filtered ("\n", stdout);
- l = l->next;
- }
+ {
+ annotate_field (9);
+
+ while (l)
+ {
+ print_command_line (l, 4);
+ l = l->next;
+ }
+ }
}
- if (!found_a_breakpoint
- && bnum != -1)
- printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+ if (!found_a_breakpoint)
+ {
+ if (bnum == -1)
+ printf_filtered ("No breakpoints or watchpoints.\n");
+ else
+ printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+ }
else
/* Compare against (CORE_ADDR)-1 in case some compiler decides
that a comparison of an unsigned with -1 is always false. */
if (last_addr != (CORE_ADDR)-1)
set_next_address (last_addr);
+
+ annotate_breakpoints_table_end ();
}
/* ARGSUSED */
others++;
if (others > 0)
{
- printf ("Note: breakpoint%s ", (others > 1) ? "s" : "");
+ printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
ALL_BREAKPOINTS (b)
if (b->address == pc)
{
others--;
- printf ("%d%s%s ",
- b->number,
- (b->enable == disabled) ? " (disabled)" : "",
- (others > 1) ? "," : ((others == 1) ? " and" : ""));
+ printf_filtered
+ ("%d%s%s ",
+ b->number,
+ (b->enable == disabled) ? " (disabled)" : "",
+ (others > 1) ? "," : ((others == 1) ? " and" : ""));
}
- printf ("also set at pc %s.\n", local_hex_string(pc));
+ printf_filtered ("also set at pc ");
+ print_address_numeric (pc, 1, gdb_stdout);
+ printf_filtered (".\n");
}
}
\f
b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
memset (b, 0, sizeof (*b));
b->address = sal.pc;
- b->symtab = sal.symtab;
+ if (sal.symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file = savestring (sal.symtab->filename,
+ strlen (sal.symtab->filename));
+ b->language = current_language->la_language;
+ b->input_radix = input_radix;
+ b->thread = -1;
b->line_number = sal.line;
b->enable = enabled;
b->next = 0;
}
check_duplicates (sal.pc);
+ breakpoints_changed ();
return b;
}
{
struct minimal_symbol *m;
- m = lookup_minimal_symbol(func_name, (struct objfile *)NULL);
+ m = lookup_minimal_symbol_text (func_name, NULL, (struct objfile *)NULL);
if (m)
sal.pc = SYMBOL_VALUE_ADDRESS (m);
else
}
}
+int
+hw_breakpoint_used_count()
+{
+ register struct breakpoint *b;
+ int i = 0;
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->type == bp_hardware_breakpoint && b->enable == enabled)
+ i++;
+ }
+
+ return i;
+}
+
+int
+hw_watchpoint_used_count(type, other_type_used)
+ enum bptype type;
+ int *other_type_used;
+{
+ register struct breakpoint *b;
+ int i = 0;
+
+ *other_type_used = 0;
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->enable == enabled)
+ {
+ if (b->type == type) i++;
+ else if ((b->type == bp_hardware_watchpoint ||
+ b->type == bp_read_watchpoint ||
+ b->type == bp_access_watchpoint)
+ && b->enable == enabled)
+ *other_type_used = 1;
+ }
+ }
+ return i;
+}
+
/* Call this after hitting the longjmp() breakpoint. Use this to set a new
breakpoint at the target of the jmp_buf.
void
set_longjmp_resume_breakpoint(pc, frame)
CORE_ADDR pc;
- FRAME frame;
+ struct frame_info *frame;
{
register struct breakpoint *b;
b->address = pc;
b->enable = enabled;
if (frame != NULL)
- b->frame = FRAME_FP(frame);
+ b->frame = frame->frame;
else
b->frame = 0;
check_duplicates (b->address);
struct breakpoint *
set_momentary_breakpoint (sal, frame, type)
struct symtab_and_line sal;
- FRAME frame;
+ struct frame_info *frame;
enum bptype type;
{
register struct breakpoint *b;
b->type = type;
b->enable = enabled;
b->disposition = donttouch;
- b->frame = (frame ? FRAME_FP (frame) : 0);
+ b->frame = (frame ? frame->frame : 0);
return b;
}
#endif
\f
/* Tell the user we have just set a breakpoint B. */
+
static void
mention (b)
struct breakpoint *b;
{
+ int say_where = 0;
+
+ /* FIXME: This is misplaced; mention() is called by things (like hitting a
+ watchpoint) other than breakpoint creation. It should be possible to
+ clean this up and at the same time replace the random calls to
+ breakpoint_changed with this hook, as has already been done for
+ delete_breakpoint_hook and so on. */
+ if (create_breakpoint_hook)
+ create_breakpoint_hook (b);
+
switch (b->type)
{
case bp_watchpoint:
printf_filtered ("Watchpoint %d: ", b->number);
- print_expression (b->exp, stdout);
+ print_expression (b->exp, gdb_stdout);
+ break;
+ case bp_hardware_watchpoint:
+ printf_filtered ("Hardware watchpoint %d: ", b->number);
+ print_expression (b->exp, gdb_stdout);
+ break;
+ case bp_read_watchpoint:
+ printf_filtered ("Hardware read watchpoint %d: ", b->number);
+ print_expression (b->exp, gdb_stdout);
+ break;
+ case bp_access_watchpoint:
+ printf_filtered ("Hardware access(read/write) watchpoint %d: ",b->number);
+ print_expression (b->exp, gdb_stdout);
break;
case bp_breakpoint:
- printf_filtered ("Breakpoint %d at %s", b->number,
- local_hex_string(b->address));
- if (b->symtab)
- printf_filtered (": file %s, line %d.",
- b->symtab->filename, b->line_number);
+ printf_filtered ("Breakpoint %d", b->number);
+ say_where = 1;
+ break;
+ case bp_hardware_breakpoint:
+ printf_filtered ("Hardware assisted breakpoint %d", b->number);
+ say_where = 1;
break;
case bp_until:
case bp_finish:
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_call_dummy:
+ case bp_watchpoint_scope:
break;
}
+ if (say_where)
+ {
+ if (addressprint || b->source_file == NULL)
+ {
+ printf_filtered (" at ");
+ print_address_numeric (b->address, 1, gdb_stdout);
+ }
+ if (b->source_file)
+ printf_filtered (": file %s, line %d.",
+ b->source_file, b->line_number);
+ }
printf_filtered ("\n");
}
#endif /* 0 */
\f
/* Set a breakpoint according to ARG (function, linenum or *address)
- and make it temporary if TEMPFLAG is nonzero. */
+ flag: first bit : 0 non-temporary, 1 temporary.
+ second bit : 0 normal breakpoint, 1 hardware breakpoint. */
static void
-break_command_1 (arg, tempflag, from_tty)
+break_command_1 (arg, flag, from_tty)
char *arg;
- int tempflag, from_tty;
+ int flag, from_tty;
{
+ int tempflag, hardwareflag;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
register struct expression *cond = 0;
/* Pointers in arg to the start, and one past the end, of the condition. */
char *cond_start = NULL;
- char *cond_end;
+ char *cond_end = NULL;
/* Pointers in arg to the start, and one past the end,
of the address part. */
char *addr_start = NULL;
- char *addr_end;
-
+ char *addr_end = NULL;
+ struct cleanup *old_chain;
+ struct cleanup *canonical_strings_chain = NULL;
+ char **canonical = (char **)NULL;
int i;
+ int thread;
+
+ hardwareflag = flag & BP_HARDWAREFLAG;
+ tempflag = flag & BP_TEMPFLAG;
sals.sals = NULL;
sals.nelts = 0;
&& (!current_source_symtab
|| (arg && (*arg == '+' || *arg == '-'))))
sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line);
+ default_breakpoint_line, &canonical);
else
- sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, &canonical);
addr_end = arg;
}
if (! sals.nelts)
return;
+ /* Make sure that all storage allocated in decode_line_1 gets freed in case
+ the following `for' loop errors out. */
+ old_chain = make_cleanup (free, sals.sals);
+ if (canonical != (char **)NULL)
+ {
+ make_cleanup (free, canonical);
+ canonical_strings_chain = make_cleanup (null_cleanup, 0);
+ for (i = 0; i < sals.nelts; i++)
+ {
+ if (canonical[i] != NULL)
+ make_cleanup (free, canonical[i]);
+ }
+ }
+
+ thread = -1; /* No specific thread yet */
+
/* Resolve all line numbers to PC's, and verify that conditions
can be parsed, before setting any breakpoints. */
for (i = 0; i < sals.nelts; i++)
{
+ char *tok, *end_tok;
+ int toklen;
+
resolve_sal_pc (&sals.sals[i]);
- while (arg && *arg)
+ tok = arg;
+
+ while (tok && *tok)
{
- if (arg[0] == 'i' && arg[1] == 'f'
- && (arg[2] == ' ' || arg[2] == '\t'))
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ cond_end = tok;
+ }
+ else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
{
- arg += 2;
- cond_start = arg;
- cond = parse_exp_1 (&arg, block_for_pc (sals.sals[i].pc), 0);
- cond_end = arg;
+ char *tmptok;
+
+ tok = end_tok + 1;
+ tmptok = tok;
+ thread = strtol (tok, &tok, 0);
+ if (tok == tmptok)
+ error ("Junk after thread keyword.");
+ if (!valid_thread_id (thread))
+ error ("Unknown thread %d\n", thread);
}
else
error ("Junk at end of arguments.");
}
}
+ if (hardwareflag)
+ {
+ int i, target_resources_ok;
+
+ i = hw_breakpoint_used_count ();
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
+ bp_hardware_breakpoint, i + sals.nelts, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
+
+ /* Remove the canonical strings from the cleanup, they are needed below. */
+ if (canonical != (char **)NULL)
+ discard_cleanups (canonical_strings_chain);
/* Now set all the breakpoints. */
for (i = 0; i < sals.nelts; i++)
b = set_raw_breakpoint (sal);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->type = bp_breakpoint;
+ b->type = hardwareflag ? bp_hardware_breakpoint : bp_breakpoint;
b->cond = cond;
+ b->thread = thread;
- /* FIXME: We should add the filename if this is a static function
- and probably if it is a line number (the line numbers could
- have changed when we re-read symbols; possibly better to disable
- the breakpoint in that case). */
- if (addr_start)
+ /* If a canonical line spec is needed use that instead of the
+ command string. */
+ if (canonical != (char **)NULL && canonical[i] != NULL)
+ b->addr_string = canonical[i];
+ else if (addr_start)
b->addr_string = savestring (addr_start, addr_end - addr_start);
if (cond_start)
b->cond_string = savestring (cond_start, cond_end - cond_start);
b->enable = enabled;
- b->disposition = tempflag ? delete : donttouch;
+ b->disposition = tempflag ? del : donttouch;
mention (b);
}
if (sals.nelts > 1)
{
- printf ("Multiple breakpoints were set.\n");
- printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+ printf_filtered ("Multiple breakpoints were set.\n");
+ printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
}
- free ((PTR)sals.sals);
+ do_cleanups (old_chain);
}
/* Helper function for break_command_1 and disassemble_command. */
char *arg;
int from_tty;
{
- break_command_1 (arg, 1, from_tty);
+ break_command_1 (arg, BP_TEMPFLAG, from_tty);
+}
+
+static void
+hbreak_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
+}
+
+static void
+thbreak_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
}
/* ARGSUSED */
+/* accessflag: 0: watch write, 1: watch read, 2: watch access(read or write)
+*/
static void
-watch_command (arg, from_tty)
+watch_command_1 (arg, accessflag, from_tty)
char *arg;
+ int accessflag;
int from_tty;
{
struct breakpoint *b;
struct symtab_and_line sal;
struct expression *exp;
struct block *exp_valid_block;
- struct value *val;
+ struct value *val, *mark;
+ struct frame_info *frame, *prev_frame;
+ char *exp_start = NULL;
+ char *exp_end = NULL;
+ char *tok, *end_tok;
+ int toklen;
+ char *cond_start = NULL;
+ char *cond_end = NULL;
+ struct expression *cond = NULL;
+ int i, other_type_used, target_resources_ok;
+ enum bptype bp_type;
+ int mem_cnt = 0;
sal.pc = 0;
sal.symtab = NULL;
/* Parse arguments. */
innermost_block = NULL;
- exp = parse_expression (arg);
+ exp_start = arg;
+ exp = parse_exp_1 (&arg, 0, 0);
+ exp_end = arg;
exp_valid_block = innermost_block;
+ mark = value_mark ();
val = evaluate_expression (exp);
release_value (val);
if (VALUE_LAZY (val))
value_fetch_lazy (val);
+ tok = arg;
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond = parse_exp_1 (&tok, 0, 0);
+ cond_end = tok;
+ }
+ if (*tok)
+ error("Junk at end of command.");
+
+ if (accessflag == 1) bp_type = bp_read_watchpoint;
+ else if (accessflag == 2) bp_type = bp_access_watchpoint;
+ else bp_type = bp_hardware_watchpoint;
+
+ mem_cnt = can_use_hardware_watchpoint (val);
+ if (mem_cnt == 0 && bp_type != bp_hardware_watchpoint)
+ error ("Expression cannot be implemented with read/access watchpoint.");
+ if (mem_cnt != 0) {
+ i = hw_watchpoint_used_count (bp_type, &other_type_used);
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bp_type, i + mem_cnt, other_type_used);
+ if (target_resources_ok == 0 && bp_type != bp_hardware_watchpoint)
+ error ("Target does not have this type of hardware watchpoint support.");
+ if (target_resources_ok < 0 && bp_type != bp_hardware_watchpoint)
+ error ("Target resources have been allocated for other types of watchpoints.");
+ }
+
/* Now set up the breakpoint. */
b = set_raw_breakpoint (sal);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->type = bp_watchpoint;
b->disposition = donttouch;
b->exp = exp;
b->exp_valid_block = exp_valid_block;
+ b->exp_string = savestring (exp_start, exp_end - exp_start);
b->val = val;
- b->cond = 0;
- b->cond_string = NULL;
- b->exp_string = savestring (arg, strlen (arg));
+ b->cond = cond;
+ if (cond_start)
+ b->cond_string = savestring (cond_start, cond_end - cond_start);
+ else
+ b->cond_string = 0;
+
+ frame = block_innermost_frame (exp_valid_block);
+ if (frame)
+ {
+ prev_frame = get_prev_frame (frame);
+ b->watchpoint_frame = frame->frame;
+ }
+ else
+ b->watchpoint_frame = (CORE_ADDR)0;
+
+ if (mem_cnt && target_resources_ok > 0)
+ b->type = bp_type;
+ else
+ b->type = bp_watchpoint;
+
+ /* If the expression is "local", then set up a "watchpoint scope"
+ breakpoint at the point where we've left the scope of the watchpoint
+ expression. */
+ if (innermost_block)
+ {
+ struct breakpoint *scope_breakpoint;
+ struct symtab_and_line scope_sal;
+
+ if (prev_frame)
+ {
+ scope_sal.pc = get_frame_pc (prev_frame);
+ scope_sal.symtab = NULL;
+ scope_sal.line = 0;
+
+ scope_breakpoint = set_raw_breakpoint (scope_sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ scope_breakpoint->number = breakpoint_count;
+
+ scope_breakpoint->type = bp_watchpoint_scope;
+ scope_breakpoint->enable = enabled;
+
+ /* Automatically delete the breakpoint when it hits. */
+ scope_breakpoint->disposition = del;
+
+ /* Only break in the proper frame (help with recursion). */
+ scope_breakpoint->frame = prev_frame->frame;
+
+ /* Set the address at which we will stop. */
+ scope_breakpoint->address = get_frame_pc (prev_frame);
+
+ /* The scope breakpoint is related to the watchpoint. We
+ will need to act on them together. */
+ b->related_breakpoint = scope_breakpoint;
+ }
+ }
+ value_free_to_mark (mark);
mention (b);
}
+
+/* Return count of locations need to be watched and can be handled
+ in hardware. If the watchpoint can not be handled
+ in hardware return zero. */
+
+static int
+can_use_hardware_watchpoint (v)
+ struct value *v;
+{
+ int found_memory_cnt = 0;
+
+ /* Make sure all the intermediate values are in memory. Also make sure
+ we found at least one memory expression. Guards against watch 0x12345,
+ which is meaningless, but could cause errors if one tries to insert a
+ hardware watchpoint for the constant expression. */
+ for ( ; v; v = v->next)
+ {
+ if (v->lval == lval_memory)
+ {
+ if (TYPE_LENGTH (VALUE_TYPE (v)) <= REGISTER_SIZE)
+ found_memory_cnt++;
+ }
+ else if (v->lval != not_lval && v->modifiable == 0)
+ return 0;
+ }
+
+ /* The expression itself looks suitable for using a hardware
+ watchpoint, but give the target machine a chance to reject it. */
+ return found_memory_cnt;
+}
+
+static void watch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ watch_command_1 (arg, 0, from_tty);
+}
+
+static void rwatch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ watch_command_1 (arg, 1, from_tty);
+}
+
+static void awatch_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ watch_command_1 (arg, 2, from_tty);
+}
+
\f
-/*
- * Helper routine for the until_command routine in infcmd.c. Here
- * because it uses the mechanisms of breakpoints.
- */
+/* Helper routine for the until_command routine in infcmd.c. Here
+ because it uses the mechanisms of breakpoints. */
+
/* ARGSUSED */
void
until_break_command (arg, from_tty)
{
struct symtabs_and_lines sals;
struct symtab_and_line sal;
- FRAME prev_frame = get_prev_frame (selected_frame);
+ struct frame_info *prev_frame = get_prev_frame (selected_frame);
struct breakpoint *breakpoint;
struct cleanup *old_chain;
if (default_breakpoint_valid)
sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line);
+ default_breakpoint_line, (char ***)NULL);
else
- sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, (char ***)NULL);
if (sals.nelts != 1)
error ("Couldn't get information on specified line.");
if (prev_frame)
{
- struct frame_info *fi;
-
- fi = get_frame_info (prev_frame);
- sal = find_pc_line (fi->pc, 0);
- sal.pc = fi->pc;
+ sal = find_pc_line (prev_frame->pc, 0);
+ sal.pc = prev_frame->pc;
breakpoint = set_momentary_breakpoint (sal, prev_frame, bp_until);
make_cleanup(delete_breakpoint, breakpoint);
}
- proceed (-1, -1, 0);
+ proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
do_cleanups(old_chain);
}
\f
goto win;
}
#endif
- printf ("No catch clause for exception %s.\n", p);
+ printf_unfiltered ("No catch clause for exception %s.\n", p);
#if 0
win:
#endif
register struct blockvector *bl;
register struct block *block;
int index, have_default = 0;
- struct frame_info *fi;
CORE_ADDR pc;
struct symtabs_and_lines sals;
struct sal_chain *sal_chain = 0;
if (selected_frame == NULL)
error ("No selected frame.");
block = get_frame_block (selected_frame);
- fi = get_frame_info (selected_frame);
- pc = fi->pc;
+ pc = selected_frame->pc;
sals.nelts = 0;
sals.sals = NULL;
else
{
/* Grab selected catch clauses. */
- error ("catch NAME not implemeneted");
+ error ("catch NAME not implemented");
#if 0
/* This isn't used; I don't know what it was for. */
sals = map_catch_names (arg, catch_breakpoint);
b->type = bp_breakpoint;
b->cond = cond;
b->enable = enabled;
- b->disposition = tempflag ? delete : donttouch;
+ b->disposition = tempflag ? del : donttouch;
- printf ("Breakpoint %d at %s", b->number, local_hex_string(b->address));
- if (b->symtab)
- printf (": file %s, line %d.", b->symtab->filename, b->line_number);
- printf ("\n");
+ mention (b);
}
if (sals.nelts > 1)
{
- printf ("Multiple breakpoints were set.\n");
- printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+ printf_unfiltered ("Multiple breakpoints were set.\n");
+ printf_unfiltered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
}
free ((PTR)sals.sals);
}
+/* Used by the gui, could be made a worker for other things. */
+
+struct breakpoint *
+set_breakpoint_sal (sal)
+struct symtab_and_line sal;
+{
+ struct breakpoint *b;
+ b = set_raw_breakpoint (sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->type = bp_breakpoint;
+ b->cond = 0;
+ b->thread = -1;
+ return b;
+}
+
#if 0
/* These aren't used; I don't know what they were for. */
/* Disable breakpoints on all catch clauses described in ARGS. */
sal = sals.sals[i];
found = (struct breakpoint *) 0;
while (breakpoint_chain
- && (sal.pc ? breakpoint_chain->address == sal.pc
- : (breakpoint_chain->symtab == sal.symtab
+ && (sal.pc
+ ? breakpoint_chain->address == sal.pc
+ : (breakpoint_chain->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (breakpoint_chain->source_file,
+ sal.symtab->filename)
&& breakpoint_chain->line_number == sal.line)))
{
b1 = breakpoint_chain;
ALL_BREAKPOINTS (b)
while (b->next
&& b->next->type != bp_watchpoint
- && (sal.pc ? b->next->address == sal.pc
- : (b->next->symtab == sal.symtab
+ && b->next->type != bp_hardware_watchpoint
+ && b->next->type != bp_read_watchpoint
+ && b->next->type != bp_access_watchpoint
+ && (sal.pc
+ ? b->next->address == sal.pc
+ : (b->next->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (b->next->source_file, sal.symtab->filename)
&& b->next->line_number == sal.line)))
{
b1 = b->next;
}
if (found->next) from_tty = 1; /* Always report if deleted more than one */
- if (from_tty) printf ("Deleted breakpoint%s ", found->next ? "s" : "");
+ if (from_tty) printf_unfiltered ("Deleted breakpoint%s ", found->next ? "s" : "");
+ breakpoints_changed ();
while (found)
{
- if (from_tty) printf ("%d ", found->number);
+ if (from_tty) printf_unfiltered ("%d ", found->number);
b1 = found->next;
delete_breakpoint (found);
found = b1;
}
- if (from_tty) putchar ('\n');
+ if (from_tty) putchar_unfiltered ('\n');
}
free ((PTR)sals.sals);
}
bpstat bs;
{
for (; bs; bs = bs->next)
- if (bs->breakpoint_at && bs->breakpoint_at->disposition == delete)
+ if (bs->breakpoint_at && bs->breakpoint_at->disposition == del
+ && bs->stop)
delete_breakpoint (bs->breakpoint_at);
}
register struct breakpoint *b;
register bpstat bs;
- if (bpt->inserted)
- target_remove_breakpoint(bpt->address, bpt->shadow_contents);
+ if (delete_breakpoint_hook)
+ delete_breakpoint_hook (bpt);
+ if (bpt->inserted)
+ remove_breakpoint (bpt);
+
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
}
check_duplicates (bpt->address);
+ /* If this breakpoint was inserted, and there is another breakpoint
+ at the same address, we need to insert the other breakpoint. */
+ if (bpt->inserted
+ && bpt->type != bp_hardware_watchpoint
+ && bpt->type != bp_read_watchpoint
+ && bpt->type != bp_access_watchpoint)
+ {
+ ALL_BREAKPOINTS (b)
+ if (b->address == bpt->address
+ && !b->duplicate
+ && b->enable != disabled)
+ {
+ int val;
+ val = target_insert_breakpoint (b->address, b->shadow_contents);
+ if (val != 0)
+ {
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
+ memory_error (val, b->address); /* which bombs us out */
+ }
+ else
+ b->inserted = 1;
+ }
+ }
free_command_lines (&bpt->commands);
if (bpt->cond)
- free ((PTR)bpt->cond);
+ free (bpt->cond);
if (bpt->cond_string != NULL)
- free ((PTR)bpt->cond_string);
+ free (bpt->cond_string);
if (bpt->addr_string != NULL)
- free ((PTR)bpt->addr_string);
+ free (bpt->addr_string);
if (bpt->exp_string != NULL)
- free ((PTR)bpt->exp_string);
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf ("breakpoint #%d deleted\n", bpt->number);
+ free (bpt->exp_string);
+ if (bpt->source_file != NULL)
+ free (bpt->source_file);
/* Be sure no bpstat's are pointing at it after it's been freed. */
- /* FIXME, how can we find all bpstat's? We just check stop_bpstat for now. */
+ /* FIXME, how can we find all bpstat's?
+ We just check stop_bpstat for now. */
for (bs = stop_bpstat; bs; bs = bs->next)
if (bs->breakpoint_at == bpt)
bs->breakpoint_at = NULL;
{
/* Ask user only if there are some breakpoints to delete. */
if (!from_tty
- || (breakpoint_chain && query ("Delete all breakpoints? ", 0, 0)))
+ || (breakpoint_chain && query ("Delete all breakpoints? ")))
{
/* No arg; clear all breakpoints. */
while (breakpoint_chain)
char *bint;
{
struct breakpoint *b = (struct breakpoint *)bint; /* get past catch_errs */
+ struct value *mark;
int i;
struct symtabs_and_lines sals;
char *s;
switch (b->type)
{
case bp_breakpoint:
+ case bp_hardware_breakpoint:
if (b->addr_string == NULL)
{
/* Anything without a string can't be re-set. */
save_enable = b->enable;
b->enable = disabled;
+ set_language (b->language);
+ input_radix = b->input_radix;
s = b->addr_string;
- sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0, (char ***)NULL);
for (i = 0; i < sals.nelts; i++)
{
resolve_sal_pc (&sals.sals[i]);
- if (b->symtab != sals.sals[i].symtab
- || b->line_number != sals.sals[i].line
- || b->address != sals.sals[i].pc)
+
+ /* Reparse conditions, they might contain references to the
+ old symtab. */
+ if (b->cond_string != NULL)
+ {
+ s = b->cond_string;
+ if (b->cond)
+ free ((PTR)b->cond);
+ b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
+ }
+
+ /* We need to re-set the breakpoint if the address changes...*/
+ if (b->address != sals.sals[i].pc
+ /* ...or new and old breakpoints both have source files, and
+ the source file name or the line number changes... */
+ || (b->source_file != NULL
+ && sals.sals[i].symtab != NULL
+ && (!STREQ (b->source_file, sals.sals[i].symtab->filename)
+ || b->line_number != sals.sals[i].line)
+ )
+ /* ...or we switch between having a source file and not having
+ one. */
+ || ((b->source_file == NULL) != (sals.sals[i].symtab == NULL))
+ )
{
- b->symtab = sals.sals[i].symtab;
+ if (b->source_file != NULL)
+ free (b->source_file);
+ if (sals.sals[i].symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file =
+ savestring (sals.sals[i].symtab->filename,
+ strlen (sals.sals[i].symtab->filename));
b->line_number = sals.sals[i].line;
b->address = sals.sals[i].pc;
-
- if (b->cond_string != NULL)
- {
- s = b->cond_string;
- if (b->cond)
- free ((PTR)b->cond);
- b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
- }
check_duplicates (b->address);
mention (b);
+
+ /* Might be better to do this just once per breakpoint_re_set,
+ rather than once for every breakpoint. */
+ breakpoints_changed ();
}
b->enable = save_enable; /* Restore it, this worked. */
}
break;
case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
innermost_block = NULL;
/* The issue arises of what context to evaluate this in. The same
one as when it was set, but what does that mean when symbols have
/* So for now, just use a global context. */
b->exp = parse_expression (b->exp_string);
b->exp_valid_block = innermost_block;
+ mark = value_mark ();
b->val = evaluate_expression (b->exp);
release_value (b->val);
if (VALUE_LAZY (b->val))
s = b->cond_string;
b->cond = parse_exp_1 (&s, (struct block *)0, 0);
}
- mention (b);
+ if (b->enable == enabled)
+ mention (b);
+ value_free_to_mark (mark);
break;
default:
case bp_finish:
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
delete_breakpoint (b);
break;
}
breakpoint_re_set ()
{
struct breakpoint *b, *temp;
+ enum language save_language;
+ int save_input_radix;
static char message1[] = "Error in re-setting breakpoint %d:\n";
char message[sizeof (message1) + 30 /* slop */];
- /* If we have no current source symtab, and we have any breakpoints,
- go through the work of making a source context. */
- if (current_source_symtab == NULL && breakpoint_chain != 0)
- {
- select_source_symtab (NULL);
- }
-
+ save_language = current_language->la_language;
+ save_input_radix = input_radix;
ALL_BREAKPOINTS_SAFE (b, temp)
{
sprintf (message, message1, b->number); /* Format possible error msg */
- catch_errors (breakpoint_re_set_one, (char *) b, message);
+ catch_errors (breakpoint_re_set_one, (char *) b, message,
+ RETURN_MASK_ALL);
}
+ set_language (save_language);
+ input_radix = save_input_radix;
create_longjmp_breakpoint("longjmp");
create_longjmp_breakpoint("_longjmp");
else
printf_filtered ("Will ignore next %d crossings of breakpoint %d.",
count, bptnum);
+ breakpoints_changed ();
return;
}
longest_to_int (value_as_long (parse_and_eval (p))),
from_tty);
printf_filtered ("\n");
+ breakpoints_changed ();
}
\f
/* Call FUNCTION on each of the breakpoints
ALL_BREAKPOINTS (b)
if (b->number == num)
{
+ struct breakpoint *related_breakpoint = b->related_breakpoint;
function (b);
+ if (related_breakpoint)
+ function (related_breakpoint);
goto win;
}
- printf ("No breakpoint number %d.\n", num);
+ printf_unfiltered ("No breakpoint number %d.\n", num);
win:
p = p1;
}
}
-static void
+void
enable_breakpoint (bpt)
struct breakpoint *bpt;
{
+ struct frame_info *save_selected_frame = NULL;
+ int save_selected_frame_level = -1;
+ int target_resources_ok, other_type_used;
+ struct value *mark;
+
+ if (bpt->type == bp_hardware_breakpoint)
+ {
+ int i;
+ i = hw_breakpoint_used_count();
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bp_hardware_breakpoint, i+1, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
bpt->enable = enabled;
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf ("breakpoint #%d enabled\n", bpt->number);
-
check_duplicates (bpt->address);
- if (bpt->type == bp_watchpoint)
+
+ if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint || bpt->type == bp_access_watchpoint)
{
- if (bpt->exp_valid_block != NULL
- && !contained_in (get_selected_block (), bpt->exp_valid_block))
+ if (bpt->exp_valid_block != NULL)
{
- printf_filtered ("\
+ struct frame_info *fr =
+ find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
Cannot enable watchpoint %d because the block in which its expression\n\
is valid is not currently in scope.\n", bpt->number);
- bpt->enable = disabled;
- return;
+ bpt->enable = disabled;
+ return;
+ }
+
+ save_selected_frame = selected_frame;
+ save_selected_frame_level = selected_frame_level;
+ select_frame (fr, -1);
}
value_free (bpt->val);
-
+ mark = value_mark ();
bpt->val = evaluate_expression (bpt->exp);
release_value (bpt->val);
if (VALUE_LAZY (bpt->val))
value_fetch_lazy (bpt->val);
+
+ if (bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
+ bpt->type == bp_access_watchpoint)
+ {
+ int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+ int mem_cnt = can_use_hardware_watchpoint (bpt->val);
+
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bpt->type, i + mem_cnt, other_type_used);
+ /* we can consider of type is bp_hardware_watchpoint, convert to
+ bp_watchpoint in the following condition */
+ if (target_resources_ok < 0)
+ {
+ printf_filtered("\
+Cannot enable watchpoint %d because target watch resources\n\
+have been allocated for other watchpoints.\n", bpt->number);
+ bpt->enable = disabled;
+ value_free_to_mark (mark);
+ return;
+ }
+ }
+
+ if (save_selected_frame_level >= 0)
+ select_frame (save_selected_frame, save_selected_frame_level);
+ value_free_to_mark (mark);
}
+
+ if (modify_breakpoint_hook)
+ modify_breakpoint_hook (bpt);
}
/* ARGSUSED */
switch (bpt->type)
{
case bp_breakpoint:
+ case bp_hardware_breakpoint:
case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
enable_breakpoint (bpt);
default:
continue;
map_breakpoint_numbers (args, enable_breakpoint);
}
-static void
+void
disable_breakpoint (bpt)
struct breakpoint *bpt;
{
- bpt->enable = disabled;
+ /* Never disable a watchpoint scope breakpoint; we want to
+ hit them when we leave scope so we can delete both the
+ watchpoint and its scope breakpoint at that time. */
+ if (bpt->type == bp_watchpoint_scope)
+ return;
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf_filtered ("breakpoint #%d disabled\n", bpt->number);
+ bpt->enable = disabled;
check_duplicates (bpt->address);
+
+ if (modify_breakpoint_hook)
+ modify_breakpoint_hook (bpt);
}
/* ARGSUSED */
switch (bpt->type)
{
case bp_breakpoint:
- case bp_watchpoint:
+ case bp_hardware_breakpoint:
+ case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
disable_breakpoint (bpt);
default:
continue;
enable_once_breakpoint (bpt)
struct breakpoint *bpt;
{
+ struct frame_info *save_selected_frame = NULL;
+ int save_selected_frame_level = -1;
+ int target_resources_ok, other_type_used;
+ struct value *mark;
+
+ if (bpt->type == bp_hardware_breakpoint)
+ {
+ int i;
+ i = hw_breakpoint_used_count();
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bp_hardware_breakpoint, i+1, 0);
+ if (target_resources_ok == 0)
+ error ("No hardware breakpoint support in the target.");
+ else if (target_resources_ok < 0)
+ error ("Hardware breakpoints used exceeds limit.");
+ }
+
bpt->enable = enabled;
bpt->disposition = disable;
-
check_duplicates (bpt->address);
+ breakpoints_changed ();
+
+ if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint || bpt->type == bp_access_watchpoint)
+ {
+ if (bpt->exp_valid_block != NULL)
+ {
+ struct frame_info *fr =
+ find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
+Cannot enable watchpoint %d because the block in which its expression\n\
+is valid is not currently in scope.\n", bpt->number);
+ bpt->enable = disabled;
+ return;
+ }
+
+ save_selected_frame = selected_frame;
+ save_selected_frame_level = selected_frame_level;
+ select_frame (fr, -1);
+ }
+
+ value_free (bpt->val);
+ mark = value_mark ();
+ bpt->val = evaluate_expression (bpt->exp);
+ release_value (bpt->val);
+ if (VALUE_LAZY (bpt->val))
+ value_fetch_lazy (bpt->val);
+
+ if (bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
+ bpt->type == bp_access_watchpoint)
+ {
+ int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+ int mem_cnt = can_use_hardware_watchpoint(bpt->val);
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+ bpt->type, i+mem_cnt, other_type_used);
+ /* we can consider of type is bp_hardware_watchpoint, convert to
+ bp_watchpoint in the following condition */
+ if (target_resources_ok < 0)
+ {
+ printf_filtered("\
+Cannot enable watchpoint %d because target watch resources\n\
+have been allocated for other watchpoints.\n", bpt->number);
+ bpt->enable = disabled;
+ value_free_to_mark (mark);
+ }
+ }
+
+ if (save_selected_frame_level >= 0)
+ select_frame (save_selected_frame, save_selected_frame_level);
+ value_free_to_mark (mark);
+ }
}
/* ARGSUSED */
struct breakpoint *bpt;
{
bpt->enable = enabled;
- bpt->disposition = delete;
+ bpt->disposition = del;
check_duplicates (bpt->address);
+ breakpoints_changed ();
}
/* ARGSUSED */
map_breakpoint_numbers (args, enable_delete_breakpoint);
}
\f
-/*
- * Use default_breakpoint_'s, or nothing if they aren't valid.
- */
+/* Use default_breakpoint_'s, or nothing if they aren't valid. */
+
struct symtabs_and_lines
decode_line_spec_1 (string, funfirstline)
char *string;
error ("Empty line specification.");
if (default_breakpoint_valid)
sals = decode_line_1 (&string, funfirstline,
- default_breakpoint_symtab, default_breakpoint_line);
+ default_breakpoint_symtab, default_breakpoint_line,
+ (char ***)NULL);
else
- sals = decode_line_1 (&string, funfirstline, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&string, funfirstline,
+ (struct symtab *)NULL, 0, (char ***)NULL);
if (*string)
error ("Junk at end of line specification: %s", string);
return sals;
breakpoint_count = 0;
add_com ("ignore", class_breakpoint, ignore_command,
- "Set ignore-count of breakpoint number N to COUNT.");
+ "Set ignore-count of breakpoint number N to COUNT.\n\
+Usage is `ignore N COUNT'.");
add_com ("commands", class_breakpoint, commands_command,
"Set commands to be executed when a breakpoint is hit.\n\
add_com ("condition", class_breakpoint, condition_command,
"Specify breakpoint number N to break only if COND is true.\n\
-N is an integer; COND is an expression to be evaluated whenever\n\
-breakpoint N is reached. ");
+Usage is `condition N COND', where N is an integer and COND is an\n\
+expression to be evaluated whenever breakpoint N is reached. ");
add_com ("tbreak", class_breakpoint, tbreak_command,
"Set a temporary breakpoint. Args like \"break\" command.\n\
-Like \"break\" except the breakpoint is only enabled temporarily,\n\
-so it will be disabled when hit. Equivalent to \"break\" followed\n\
-by using \"enable once\" on the breakpoint number.");
+Like \"break\" except the breakpoint is only temporary,\n\
+so it will be deleted when hit. Equivalent to \"break\" followed\n\
+by using \"enable delete\" on the breakpoint number.");
+
+ add_com ("hbreak", class_breakpoint, hbreak_command,
+ "Set a hardware assisted breakpoint. Args like \"break\" command.\n\
+Like \"break\" except the breakpoint requires hardware support,\n\
+some target hardware may not have this support.");
+
+ add_com ("thbreak", class_breakpoint, thbreak_command,
+ "Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
+Like \"hbreak\" except the breakpoint is only temporary,\n\
+so it will be deleted when hit.");
add_prefix_cmd ("enable", class_breakpoint, enable_command,
"Enable some breakpoints.\n\
add_cmd ("once", no_class, enable_once_command,
"Enable breakpoints for one hit. Give breakpoint numbers.\n\
-If a breakpoint is hit while enabled in this fashion, it becomes disabled.\n\
-See the \"tbreak\" command which sets a breakpoint and enables it once.",
+If a breakpoint is hit while enabled in this fashion, it becomes disabled.",
&enablebreaklist);
add_cmd ("delete", no_class, enable_delete_command,
add_cmd ("once", no_class, enable_once_command,
"Enable breakpoints for one hit. Give breakpoint numbers.\n\
-If a breakpoint is hit while enabled in this fashion, it becomes disabled.\n\
-See the \"tbreak\" command which sets a breakpoint and enables it once.",
+If a breakpoint is hit while enabled in this fashion, it becomes disabled.",
&enablelist);
add_prefix_cmd ("disable", class_breakpoint, disable_command,
&deletelist);
add_com ("clear", class_breakpoint, clear_command,
- "Clear breakpoint at specified line or function.\n\
+ concat ("Clear breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, all breakpoints in that line are cleared.\n\
If function is specified, breakpoints at beginning of function are cleared.\n\
-If an address is specified, breakpoints at that address are cleared.\n\n\
-With no argument, clears all breakpoints in the line that the selected frame\n\
+If an address is specified, breakpoints at that address are cleared.\n\n",
+"With no argument, clears all breakpoints in the line that the selected frame\n\
is executing in.\n\
\n\
-See also the \"delete\" command which clears breakpoints by number.");
+See also the \"delete\" command which clears breakpoints by number.", NULL));
add_com ("break", class_breakpoint, break_command,
- "Set breakpoint at specified line or function.\n\
+ concat ("Set breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, break at start of code for that line.\n\
If function is specified, break at start of code for that function.\n\
-If an address is specified, break at that exact address.\n\
-With no arg, uses current execution address of selected stack frame.\n\
+If an address is specified, break at that exact address.\n",
+"With no arg, uses current execution address of selected stack frame.\n\
This is useful for breaking on return to a stack frame.\n\
\n\
Multiple breakpoints at one place are permitted, and useful if conditional.\n\
\n\
-Do \"help breakpoints\" for info on other commands dealing with breakpoints.");
+Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
add_com_alias ("b", "break", class_run, 1);
add_com_alias ("br", "break", class_run, 1);
add_com_alias ("bre", "break", class_run, 1);
add_com_alias ("brea", "break", class_run, 1);
add_info ("breakpoints", breakpoints_info,
- "Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+ concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n\
-Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.");
+breakpoint set.", NULL));
#if MAINTENANCE_CMDS
add_cmd ("breakpoints", class_maintenance, maintenance_info_breakpoints,
- "Status of all breakpoints, or breakpoint number NUMBER.\n\
+ concat ("Status of all breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint - normal breakpoint\n\
\twatchpoint - watchpoint\n\
\tlongjmp - internal breakpoint used to step through longjmp()\n\
\tlongjmp resume - internal breakpoint at the target of longjmp()\n\
\tuntil - internal breakpoint used by the \"until\" command\n\
-\tfinish - internal breakpoint used by the \"finish\" command\n\
-The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+\tfinish - internal breakpoint used by the \"finish\" command\n",
+"The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit. \"dis\" means that the\n\
breakpoint will be disabled. The \"Address\" and \"What\" columns indicate the\n\
-address and file/line number respectively.\n\n\
-Convenience variable \"$_\" and default examine address for \"x\"\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed.\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
-breakpoint set.",
+breakpoint set.", NULL),
&maintenanceinfolist);
#endif /* MAINTENANCE_CMDS */
A watchpoint stops execution of your program whenever the value of\n\
an expression changes.");
- add_info ("watchpoints", breakpoints_info,
- "Synonym for ``info breakpoints''.");
-}
-
-/* OK, when we call objfile_relocate, we need to relocate breakpoints
- too. breakpoint_re_set is not a good choice--for example, if
- addr_string contains just a line number without a file name the
- breakpoint might get set in a different file. In general, there is
- no need to go all the way back to the user's string (though this might
- work if some effort were made to canonicalize it), since symtabs and
- everything except addresses are still valid.
-
- Probably the best way to solve this is to have each breakpoint save
- the objfile and the section number that was used to set it (if set
- by "*addr", probably it is best to use find_pc_line to get a symtab
- and use the objfile and block_line_section for that symtab). Then
- objfile_relocate can call fixup_breakpoints with the objfile and
- the new_offsets, and it can relocate only the appropriate breakpoints. */
+ add_com ("rwatch", class_breakpoint, rwatch_command,
+ "Set a read watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression is read.");
-#ifdef IBM6000_TARGET
-/* But for now, just kludge it based on the concept that before an
- objfile is relocated the breakpoint is below 0x10000000, and afterwards
- it is higher, so that way we only relocate each breakpoint once. */
+ add_com ("awatch", class_breakpoint, awatch_command,
+ "Set a watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression is either read or written.");
-void
-fixup_breakpoints (low, high, delta)
- CORE_ADDR low;
- CORE_ADDR high;
- CORE_ADDR delta;
-{
- struct breakpoint *b;
+ add_info ("watchpoints", breakpoints_info,
+ "Synonym for ``info breakpoints''.");
- ALL_BREAKPOINTS (b)
- {
- if (b->address >= low && b->address <= high)
- b->address += delta;
- }
}
-#endif