#include "jit.h"
#include "xml-syscall.h"
#include "parser-defs.h"
+#include "gdb_regex.h"
+#include "probe.h"
#include "cli/cli-utils.h"
#include "continuations.h"
#include "stack.h"
#include "skip.h"
-#include "record.h"
#include "gdb_regex.h"
#include "ax-gdb.h"
breakpoints. */
struct breakpoint_ops bkpt_breakpoint_ops;
+/* Breakpoints set on probes. */
+static struct breakpoint_ops bkpt_probe_breakpoint_ops;
+
/* A reference-counted struct command_line. This lets multiple
breakpoints share a single command list. */
struct counted_command_line
int
breakpoints_always_inserted_mode (void)
{
- return ((always_inserted_mode == always_inserted_on
- || (always_inserted_mode == always_inserted_auto && non_stop))
- && !RECORD_IS_USED);
+ return (always_inserted_mode == always_inserted_on
+ || (always_inserted_mode == always_inserted_auto && non_stop));
}
static const char condition_evaluation_both[] = "host or target";
/* Update BUF, which is LEN bytes read from the target address MEMADDR,
by replacing any memory breakpoints with their shadowed contents.
+ If READBUF is not NULL, this buffer must not overlap with any of
+ the breakpoint location's shadow_contents buffers. Otherwise,
+ a failed assertion internal error will be raised.
+
The range of shadowed area by each bp_location is:
bl->address - bp_location_placed_address_before_address_max
up to bl->address + bp_location_shadow_len_after_address_max
if (readbuf != NULL)
{
+ /* Verify that the readbuf buffer does not overlap with
+ the shadow_contents buffer. */
+ gdb_assert (bl->target_info.shadow_contents >= readbuf + len
+ || readbuf >= (bl->target_info.shadow_contents
+ + bl->target_info.shadow_len));
+
/* Update the read buffer with this inserted breakpoint's
shadow. */
memcpy (readbuf + bp_addr - memaddr,
if (!should_be_inserted (bl) || (bl->inserted && !bl->needs_update))
return 0;
- /* Initialize the target-specific information. */
- memset (&bl->target_info, 0, sizeof (bl->target_info));
+ /* Note we don't initialize bl->target_info, as that wipes out
+ the breakpoint location's shadow_contents if the breakpoint
+ is still inserted at that location. This in turn breaks
+ target_read_memory which depends on these buffers when
+ a memory read is requested at the breakpoint location:
+ Once the target_info has been wiped, we fail to see that
+ we have a breakpoint inserted at that address and thus
+ read the breakpoint instead of returning the data saved in
+ the breakpoint location's shadow contents. */
bl->target_info.placed_address = bl->address;
bl->target_info.placed_address_space = bl->pspace->aspace;
bl->target_info.length = bl->length;
insert_breakpoint_locations ();
}
+/* Invoke CALLBACK for each of bp_location. */
+
+void
+iterate_over_bp_locations (walk_bp_location_callback callback)
+{
+ struct bp_location *loc, **loc_tmp;
+
+ ALL_BP_LOCATIONS (loc, loc_tmp)
+ {
+ callback (loc, NULL);
+ }
+}
+
/* This is used when we need to synch breakpoint conditions between GDB and the
target. It is the case with deleting and disabling of breakpoints when using
always-inserted mode. */
/* Minimal symbol(s) for "longjmp", "siglongjmp", etc. (if any). */
struct minimal_symbol *longjmp_msym[NUM_LONGJMP_NAMES];
+ /* True if we have looked for longjmp probes. */
+ int longjmp_searched;
+
+ /* SystemTap probe points for longjmp (if any). */
+ VEC (probe_p) *longjmp_probes;
+
/* Minimal symbol for "std::terminate()" (if any). */
struct minimal_symbol *terminate_msym;
/* Minimal symbol for "_Unwind_DebugHook" (if any). */
struct minimal_symbol *exception_msym;
+
+ /* True if we have looked for exception probes. */
+ int exception_searched;
+
+ /* SystemTap probe points for unwinding (if any). */
+ VEC (probe_p) *exception_probes;
};
static const struct objfile_data *breakpoint_objfile_key;
return bp_objfile_data;
}
+static void
+free_breakpoint_probes (struct objfile *obj, void *data)
+{
+ struct breakpoint_objfile_data *bp_objfile_data = data;
+
+ VEC_free (probe_p, bp_objfile_data->longjmp_probes);
+ VEC_free (probe_p, bp_objfile_data->exception_probes);
+}
+
static void
create_overlay_event_breakpoint (void)
{
bp_objfile_data = get_breakpoint_objfile_data (objfile);
+ if (!bp_objfile_data->longjmp_searched)
+ {
+ bp_objfile_data->longjmp_probes
+ = find_probes_in_objfile (objfile, "libc", "longjmp");
+ bp_objfile_data->longjmp_searched = 1;
+ }
+
+ if (bp_objfile_data->longjmp_probes != NULL)
+ {
+ int i;
+ struct probe *probe;
+ struct gdbarch *gdbarch = get_objfile_arch (objfile);
+
+ for (i = 0;
+ VEC_iterate (probe_p,
+ bp_objfile_data->longjmp_probes,
+ i, probe);
+ ++i)
+ {
+ struct breakpoint *b;
+
+ b = create_internal_breakpoint (gdbarch, probe->address,
+ bp_longjmp_master,
+ &internal_breakpoint_ops);
+ b->addr_string = xstrdup ("-probe-stap libc:longjmp");
+ b->enable_state = bp_disabled;
+ }
+
+ continue;
+ }
+
for (i = 0; i < NUM_LONGJMP_NAMES; i++)
{
struct breakpoint *b;
bp_objfile_data = get_breakpoint_objfile_data (objfile);
+ /* We prefer the SystemTap probe point if it exists. */
+ if (!bp_objfile_data->exception_searched)
+ {
+ bp_objfile_data->exception_probes
+ = find_probes_in_objfile (objfile, "libgcc", "unwind");
+ bp_objfile_data->exception_searched = 1;
+ }
+
+ if (bp_objfile_data->exception_probes != NULL)
+ {
+ struct gdbarch *gdbarch = get_objfile_arch (objfile);
+ int i;
+ struct probe *probe;
+
+ for (i = 0;
+ VEC_iterate (probe_p,
+ bp_objfile_data->exception_probes,
+ i, probe);
+ ++i)
+ {
+ struct breakpoint *b;
+
+ b = create_internal_breakpoint (gdbarch, probe->address,
+ bp_exception_master,
+ &internal_breakpoint_ops);
+ b->addr_string = xstrdup ("-probe-stap libgcc:unwind");
+ b->enable_state = bp_disabled;
+ }
+
+ continue;
+ }
+
+ /* Otherwise, try the hook function. */
+
if (msym_not_found_p (bp_objfile_data->exception_msym))
continue;
in breakpoint.h. */
int
-ep_is_catchpoint (struct breakpoint *ep)
+is_catchpoint (struct breakpoint *ep)
{
return (ep->type == bp_catchpoint);
}
}
else if (loc)
{
- struct ui_stream *stb = ui_out_stream_new (uiout);
- struct cleanup *stb_chain = make_cleanup_ui_out_stream_delete (stb);
+ struct ui_file *stb = mem_fileopen ();
+ struct cleanup *stb_chain = make_cleanup_ui_file_delete (stb);
- print_address_symbolic (loc->gdbarch, loc->address, stb->stream,
+ print_address_symbolic (loc->gdbarch, loc->address, stb,
demangle, "");
ui_out_field_stream (uiout, "at", stb);
if (!part_of_multiple && b->hit_count)
{
/* FIXME should make an annotation for this. */
- if (ep_is_catchpoint (b))
+ if (is_catchpoint (b))
ui_out_text (uiout, "\tcatchpoint");
else if (is_tracepoint (b))
ui_out_text (uiout, "\ttracepoint");
copy->loc->address = orig->loc->address;
copy->loc->section = orig->loc->section;
copy->loc->pspace = orig->loc->pspace;
+ copy->loc->probe = orig->loc->probe;
if (orig->loc->source_file != NULL)
copy->loc->source_file = xstrdup (orig->loc->source_file);
loc->requested_address = sal->pc;
loc->address = adjusted_address;
loc->pspace = sal->pspace;
+ loc->probe = sal->probe;
gdb_assert (loc->pspace != NULL);
loc->section = sal->section;
loc->gdbarch = loc_gdbarch;
enum bptype type_wanted = (flag & BP_HARDWAREFLAG
? bp_hardware_breakpoint
: bp_breakpoint);
+ struct breakpoint_ops *ops;
+ const char *arg_cp = arg;
+
+ /* Matching breakpoints on probes. */
+ if (arg && probe_linespec_to_ops (&arg_cp) != NULL)
+ ops = &bkpt_probe_breakpoint_ops;
+ else
+ ops = &bkpt_breakpoint_ops;
create_breakpoint (get_current_arch (),
arg,
tempflag, type_wanted,
0 /* Ignore count */,
pending_break_support,
- &bkpt_breakpoint_ops,
+ ops,
from_tty,
1 /* enabled */,
0 /* internal */,
{
CORE_ADDR address_start, address_end;
struct bp_location *bl = b->loc;
- struct ui_stream *stb = ui_out_stream_new (uiout);
- struct cleanup *cleanup = make_cleanup_ui_out_stream_delete (stb);
+ struct ui_file *stb = mem_fileopen ();
+ struct cleanup *cleanup = make_cleanup_ui_file_delete (stb);
gdb_assert (bl);
address_end = address_start + bl->length - 1;
ui_out_text (uiout, "\taddress range: ");
- fprintf_unfiltered (stb->stream, "[%s, %s]",
+ fprintf_unfiltered (stb, "[%s, %s]",
print_core_address (bl->gdbarch, address_start),
print_core_address (bl->gdbarch, address_end));
ui_out_field_stream (uiout, "addr", stb);
struct cleanup *old_chain;
struct breakpoint *b;
const struct bp_location *bl;
- struct ui_stream *stb;
+ struct ui_file *stb;
enum print_stop_action result;
struct watchpoint *w;
struct ui_out *uiout = current_uiout;
b = bs->breakpoint_at;
w = (struct watchpoint *) b;
- stb = ui_out_stream_new (uiout);
- old_chain = make_cleanup_ui_out_stream_delete (stb);
+ stb = mem_fileopen ();
+ old_chain = make_cleanup_ui_file_delete (stb);
switch (b->type)
{
mention (b);
make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nOld value = ");
- watchpoint_value_print (bs->old_val, stb->stream);
+ watchpoint_value_print (bs->old_val, stb);
ui_out_field_stream (uiout, "old", stb);
ui_out_text (uiout, "\nNew value = ");
- watchpoint_value_print (w->val, stb->stream);
+ watchpoint_value_print (w->val, stb);
ui_out_field_stream (uiout, "new", stb);
ui_out_text (uiout, "\n");
/* More than one watchpoint may have been triggered. */
mention (b);
make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nValue = ");
- watchpoint_value_print (w->val, stb->stream);
+ watchpoint_value_print (w->val, stb);
ui_out_field_stream (uiout, "value", stb);
ui_out_text (uiout, "\n");
result = PRINT_UNKNOWN;
mention (b);
make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nOld value = ");
- watchpoint_value_print (bs->old_val, stb->stream);
+ watchpoint_value_print (bs->old_val, stb);
ui_out_field_stream (uiout, "old", stb);
ui_out_text (uiout, "\nNew value = ");
}
make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nValue = ");
}
- watchpoint_value_print (w->val, stb->stream);
+ watchpoint_value_print (w->val, stb);
ui_out_field_stream (uiout, "new", stb);
ui_out_text (uiout, "\n");
result = PRINT_UNKNOWN;
/* Nothing to mention. These breakpoints are internal. */
}
+/* Specific methods for probe breakpoints. */
+
+static int
+bkpt_probe_insert_location (struct bp_location *bl)
+{
+ int v = bkpt_insert_location (bl);
+
+ if (v == 0)
+ {
+ /* The insertion was successful, now let's set the probe's semaphore
+ if needed. */
+ bl->probe->pops->set_semaphore (bl->probe, bl->gdbarch);
+ }
+
+ return v;
+}
+
+static int
+bkpt_probe_remove_location (struct bp_location *bl)
+{
+ /* Let's clear the semaphore before removing the location. */
+ bl->probe->pops->clear_semaphore (bl->probe, bl->gdbarch);
+
+ return bkpt_remove_location (bl);
+}
+
+static void
+bkpt_probe_create_sals_from_address (char **arg,
+ struct linespec_result *canonical,
+ enum bptype type_wanted,
+ char *addr_start, char **copy_arg)
+{
+ struct linespec_sals lsal;
+
+ lsal.sals = parse_probes (arg, canonical);
+
+ *copy_arg = xstrdup (canonical->addr_string);
+ lsal.canonical = xstrdup (*copy_arg);
+
+ VEC_safe_push (linespec_sals, canonical->sals, &lsal);
+}
+
+static void
+bkpt_probe_decode_linespec (struct breakpoint *b, char **s,
+ struct symtabs_and_lines *sals)
+{
+ *sals = parse_probes (s, NULL);
+ if (!sals->sals)
+ error (_("probe not found"));
+}
+
/* The breakpoint_ops structure to be used in tracepoints. */
static void
struct breakpoint_ops tracepoint_breakpoint_ops;
+/* The breakpoint_ops structure to be use on tracepoints placed in a
+ static probe. */
+
+static void
+tracepoint_probe_create_sals_from_address (char **arg,
+ struct linespec_result *canonical,
+ enum bptype type_wanted,
+ char *addr_start, char **copy_arg)
+{
+ /* We use the same method for breakpoint on probes. */
+ bkpt_probe_create_sals_from_address (arg, canonical, type_wanted,
+ addr_start, copy_arg);
+}
+
+static void
+tracepoint_probe_decode_linespec (struct breakpoint *b, char **s,
+ struct symtabs_and_lines *sals)
+{
+ /* We use the same method for breakpoint on probes. */
+ bkpt_probe_decode_linespec (b, s, sals);
+}
+
+static struct breakpoint_ops tracepoint_probe_breakpoint_ops;
+
/* The breakpoint_ops structure to be used on static tracepoints with
markers (`-m'). */
static void
trace_command (char *arg, int from_tty)
{
+ struct breakpoint_ops *ops;
+ const char *arg_cp = arg;
+
+ if (arg && probe_linespec_to_ops (&arg_cp))
+ ops = &tracepoint_probe_breakpoint_ops;
+ else
+ ops = &tracepoint_breakpoint_ops;
+
if (create_breakpoint (get_current_arch (),
arg,
NULL, 0, 1 /* parse arg */,
bp_tracepoint /* type_wanted */,
0 /* Ignore count */,
pending_break_support,
- &tracepoint_breakpoint_ops,
+ ops,
from_tty,
1 /* enabled */,
0 /* internal */, 0))
ops->print_it = momentary_bkpt_print_it;
ops->print_mention = momentary_bkpt_print_mention;
+ /* Probe breakpoints. */
+ ops = &bkpt_probe_breakpoint_ops;
+ *ops = bkpt_breakpoint_ops;
+ ops->insert_location = bkpt_probe_insert_location;
+ ops->remove_location = bkpt_probe_remove_location;
+ ops->create_sals_from_address = bkpt_probe_create_sals_from_address;
+ ops->decode_linespec = bkpt_probe_decode_linespec;
+
/* GNU v3 exception catchpoints. */
ops = &gnu_v3_exception_catchpoint_ops;
*ops = bkpt_breakpoint_ops;
ops->create_breakpoints_sal = tracepoint_create_breakpoints_sal;
ops->decode_linespec = tracepoint_decode_linespec;
+ /* Probe tracepoints. */
+ ops = &tracepoint_probe_breakpoint_ops;
+ *ops = tracepoint_breakpoint_ops;
+ ops->create_sals_from_address = tracepoint_probe_create_sals_from_address;
+ ops->decode_linespec = tracepoint_probe_decode_linespec;
+
/* Static tracepoints with marker (`-m'). */
ops = &strace_marker_breakpoint_ops;
*ops = tracepoint_breakpoint_ops;
observer_attach_inferior_exit (clear_syscall_counts);
observer_attach_memory_changed (invalidate_bp_value_on_memory_change);
- breakpoint_objfile_key = register_objfile_data ();
+ breakpoint_objfile_key
+ = register_objfile_data_with_cleanup (NULL, free_breakpoint_probes);
catch_syscall_inferior_data
= register_inferior_data_with_cleanup (catch_syscall_inferior_data_cleanup);
projects / deliverable / binutils-gdb.git / blobdiff